•Download as PPT, PDF•

24 likes•25,237 views

Newton's First Law of Motion states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. It also describes inertia as an object's resistance to changes in its motion. Newton's Second Law states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object. Newton's Third Law states that for every action, there is an equal and opposite reaction.

Report

Share

Report

Share

Balanced and Unbalanced Forces

Forces can be pushes or pulls and are measured in Newtons. A net force is the combination of all forces acting on an object. An unbalanced net force will cause a change in an object's motion, while a balanced net force will not. Friction and air resistance are types of forces that oppose motion. Gravity is an attractive force between objects that depends on their masses and distance between them. Newton's second law relates force, mass, and acceleration.

Law of acceleration

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on it, and inversely proportional to its mass. The net force on an object can be calculated using the formula F=ma, where F is the net force, m is the mass of the object, and a is the acceleration. Examples are provided to demonstrate how Newton's second law can be used to calculate the force or acceleration when one variable is known.

Newtons Laws Of Motion

Newton's three laws of motion are summarized as follows:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a force is directly proportional to the force magnitude and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction.

Potential energy

This document defines and provides examples of different types of potential energy including elastic, chemical, and gravitational potential energy. It explains that potential energy is the energy possessed by an object due to its position or condition. Gravitational potential energy specifically refers to the energy of an object due to its vertical position or height and can be calculated using the formula: PE = mgh, where m is mass, g is gravity, and h is height. Several examples are provided to demonstrate calculating gravitational potential energy.

WORK POWER AND ENERGY

1) Work is defined as the product of the net force acting on a body and the distance moved in the direction of the force. The SI unit for work is the joule.
2) Power is defined as the rate at which work is done. It is measured in watts, which are equal to one joule per second.
3) There are two main types of energy: kinetic energy, which is the energy of motion, and potential energy, which is stored energy due to an object's position or composition. The SI unit for both is the joule. According to the law of conservation of energy, the total energy in an isolated system remains constant.

Speed,velocity,acceleration

The document discusses key concepts related to motion including speed, velocity, acceleration, and frames of reference. It defines speed as distance traveled over time, velocity as including both speed and direction making it a vector quantity, and acceleration as how velocity changes over time either in magnitude or direction. Examples are provided to demonstrate calculating speed, velocity, and acceleration using formulas.

Distance and displacement

The document discusses the differences between distance and displacement. Distance refers to the total length of the path traveled, while displacement refers to the straight line distance between the starting and ending points. Displacement can be zero if the ending point is the same as the starting point, while distance traveled would still be greater than zero in this case. Both distance and displacement would be zero if an object returns to its original starting point.

Law of interaction

1) Newton's third law of motion states that for every action, there is an equal and opposite reaction.
2) Whenever one object exerts a force on a second object, the second object exerts an equal but opposite force back on the first object. These paired forces are called action-reaction force pairs.
3) Examples of action-reaction force pairs include a rocket exhaust pushing down on gases which push back up on the rocket with an equal force, and a car tire pushing down on the road surface while the road pushes back up on the tire.

Balanced and Unbalanced Forces

Forces can be pushes or pulls and are measured in Newtons. A net force is the combination of all forces acting on an object. An unbalanced net force will cause a change in an object's motion, while a balanced net force will not. Friction and air resistance are types of forces that oppose motion. Gravity is an attractive force between objects that depends on their masses and distance between them. Newton's second law relates force, mass, and acceleration.

Law of acceleration

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on it, and inversely proportional to its mass. The net force on an object can be calculated using the formula F=ma, where F is the net force, m is the mass of the object, and a is the acceleration. Examples are provided to demonstrate how Newton's second law can be used to calculate the force or acceleration when one variable is known.

Newtons Laws Of Motion

Newton's three laws of motion are summarized as follows:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a force is directly proportional to the force magnitude and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction.

Potential energy

This document defines and provides examples of different types of potential energy including elastic, chemical, and gravitational potential energy. It explains that potential energy is the energy possessed by an object due to its position or condition. Gravitational potential energy specifically refers to the energy of an object due to its vertical position or height and can be calculated using the formula: PE = mgh, where m is mass, g is gravity, and h is height. Several examples are provided to demonstrate calculating gravitational potential energy.

WORK POWER AND ENERGY

1) Work is defined as the product of the net force acting on a body and the distance moved in the direction of the force. The SI unit for work is the joule.
2) Power is defined as the rate at which work is done. It is measured in watts, which are equal to one joule per second.
3) There are two main types of energy: kinetic energy, which is the energy of motion, and potential energy, which is stored energy due to an object's position or composition. The SI unit for both is the joule. According to the law of conservation of energy, the total energy in an isolated system remains constant.

Speed,velocity,acceleration

The document discusses key concepts related to motion including speed, velocity, acceleration, and frames of reference. It defines speed as distance traveled over time, velocity as including both speed and direction making it a vector quantity, and acceleration as how velocity changes over time either in magnitude or direction. Examples are provided to demonstrate calculating speed, velocity, and acceleration using formulas.

Distance and displacement

The document discusses the differences between distance and displacement. Distance refers to the total length of the path traveled, while displacement refers to the straight line distance between the starting and ending points. Displacement can be zero if the ending point is the same as the starting point, while distance traveled would still be greater than zero in this case. Both distance and displacement would be zero if an object returns to its original starting point.

Law of interaction

1) Newton's third law of motion states that for every action, there is an equal and opposite reaction.
2) Whenever one object exerts a force on a second object, the second object exerts an equal but opposite force back on the first object. These paired forces are called action-reaction force pairs.
3) Examples of action-reaction force pairs include a rocket exhaust pushing down on gases which push back up on the rocket with an equal force, and a car tire pushing down on the road surface while the road pushes back up on the tire.

Law of inertia

The document discusses inertia and how it relates to motion. It defines inertia as the property of an object that resists changes to its motion. It explains that according to Newton's first law, an object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted on by an unbalanced force. Real-world examples are provided to illustrate inertia, such as why seatbelts are important in vehicles.

Motion

The document discusses different types of motion including linear motion, curvilinear motion, rotatory motion, revolution motion, oscillatory motion, and Brownian motion. It provides definitions and examples for each type. Key details covered include that linear motion involves straight-line movement, curvilinear motion curved paths, rotatory motion involves rotation around an axis, and revolution motion revolving around another object. Physics concepts related to motion such as mechanics, kinematics, and dynamics are also briefly introduced.

Newton third law of motion ppt

The document discusses Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. It provides several examples to illustrate this law, including rockets propelling upwards as hot gases push down, cars moving forward as wheels push backwards on the road, a baseball hitting a bat causing the bat to push the ball in the opposite direction, and birds staying aloft as their wings push down on the air causing the air to push up with an equal force. Fish are also able to propel forward as their fins push water backwards with an opposing force. In each case, the size and direction of the action and reaction forces are equal and opposite.

Motion speed velocity_ ppt.

The document defines and explains key concepts related to motion including distance, displacement, speed, velocity, and acceleration. It provides equations and examples to calculate speed, velocity, and acceleration. Speed is the distance traveled per unit of time. Velocity includes both speed and direction of motion. Acceleration is the rate of change of velocity with respect to time. The document uses graphs and calculations to illustrate these concepts.

Newton's first law of motion

Newton's First Law of Motion states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. An unbalanced force is a net force that is not equal to zero and causes a change in an object's velocity. Balanced forces have no net force and do not cause a change in velocity, while unbalanced forces have a non-zero net force and do cause a change in velocity. Examples are given of how friction and collisions can cause changes in motion by introducing unbalanced forces.

Light and The Electromagnetic Spectrum

Dispersion of light results in a spectrum of visible light colors from red to violet (ROYGBIV). The document discusses how dispersion occurs when white light passes through water droplets, forming a rainbow. It also explains that higher frequency light waves have shorter wavelengths and greater intensity, bending more when dispersed, while lower frequency red light bends the least. The electromagnetic spectrum encompasses waves of different frequencies beyond the visible spectrum.

3 Laws of Motion

Here are the laws present in each situation:
1. Second law (force causes acceleration)
2. First law (an object at rest stays at rest unless a force acts on it)
3. Third law (for every action there is an equal and opposite reaction)
4. Second law (force causes acceleration)
5. Third law (for every action there is an equal and opposite reaction)
6. First law (an object at rest stays at rest unless a force acts on it)
7. Third law (for every action there is an equal and opposite reaction)
8. Third law (for every action there is an equal and opposite reaction)

Newton's law of gravitation

The document discusses Newton's realization that the force of gravity on Earth must come from Earth itself and must also be what keeps the Moon in orbit. It then explains Newton's third law and how it applies to gravitational forces between objects of different masses. The document also defines the universal law of gravitation, including how the gravitational force between two objects is proportional to their masses and inversely proportional to the square of the distance between them. It further discusses how to calculate gravitational forces and acceleration due to gravity at different locations and distances from Earth.

Newtons law of motion grade 8

Sir Isaac Newton was an English physicist and mathematician born in 1642 who made seminal contributions to the fields of natural philosophy, mathematics, astronomy, and optics. He is most famous for formulating the three laws of motion, including:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction.

THREE LAWS OF MOTION

Sir Isaac Newton discovered the three laws of motion in the late 1600s. The first law states that objects at rest stay at rest and objects in motion stay in motion unless acted on by an unbalanced force. The second law defines the relationship between force, mass, and acceleration using the equation F=ma. The third law states that for every action there is an equal and opposite reaction. These laws describe the motion of all objects and are still used today to understand forces and motion.

Law of inertia

The document discusses Newton's laws of motion through examples and activities. It begins by introducing inertia and having students relate experiences of sudden stops or starts in vehicles. Several activities are described to illustrate inertia, such as placing a coin on paper and removing the paper quickly. The document then summarizes Newton's three laws of motion, defines key terms like force, mass, and acceleration, and provides examples of how the laws apply in various situations like throwing a ball or stubbing a toe.

Work and Energy

The document discusses various physics concepts related to work, energy and power including:
- The definition of work in physics and the formula to calculate work.
- Kinetic energy and its formula. Kinetic energy depends on an object's mass and velocity.
- Gravitational potential energy and its formula. Gravitational potential energy depends on an object's mass, height above ground, and gravitational acceleration.
- The principles of conservation and conversion of energy. Energy cannot be created or destroyed, it can only change form.

Acceleration

Acceleration is the rate of change of an object's velocity. An object accelerates any time its speed or direction changes. Positive acceleration occurs when speed increases, while negative acceleration occurs when speed decreases. Acceleration is calculated by dividing the change in velocity by the time interval over the change occurred. Amusement park rides like rollercoasters produce high speeds and accelerations through steep drops and loops that accelerate riders via gravity, as well as sharp turns that accelerate riders towards the sides of cars.

Newton's second law of motion

Newton's second law of motion states that the acceleration of an object depends on the mass of the object and the net force acting upon it. An unbalanced net force is required to change the velocity of an object, with greater net forces producing greater accelerations. The relationship between force, mass, and acceleration is expressed by the equation Force = Mass x Acceleration.

Ppt Work

Work involves transferring energy by applying a force that causes an object to move in the direction of the force. For work to be done, both a force and movement are required. The amount of work done can be calculated using the formula Work = Force x Distance, where force is measured in Newtons and distance in meters, with the unit of work being the Joule. When work is done, energy is transferred from the object applying the force to the object being moved.

Physics: Potential and Kinetic Energy

Energy is the ability to do work.
Everything that happens in the world uses energy!
Most of the time we can’t see energy, but it is
everywhere around us!

Physical, chemical changes & states of matter.ppt

Physical changes alter the shape or form of a substance but not its chemical composition. Chemical changes alter the molecular structure of a substance and create new substances. States of matter include solids, liquids, gases, and plasmas, which substances can transition between when temperature or other conditions change. A Bose-Einstein condensate is a state of matter that occurs when atoms are cooled to near absolute zero and behave as a single superatom.

Unit 28 - Heat And Temperature

Temperature is a measure of the average kinetic energy of particles, with higher temperatures indicating faster particle motion. There are three main temperature scales: Fahrenheit, Celsius, and Kelvin. Fahrenheit and Celsius are used to measure temperatures experienced in daily life, while Kelvin is used for scientific purposes since it does not have negative values. Heat is transferred between objects through conduction, convection, and radiation. Conduction requires direct contact, convection occurs through fluid movement, and radiation transfers heat via electromagnetic waves.

Nature of waves

The document discusses the nature and characteristics of waves, including defining vibration, amplitude, period, frequency, and simple harmonic motion. It describes how vibrating objects can produce different types of waves, such as electromagnetic waves from vibrating electrons and mechanical waves that require a medium and are either transverse or longitudinal. The characteristics of transverse and longitudinal waves are compared, such as their direction of particle oscillation and motion of the waves through different media.

Newton's second law of motion

- Sir Isaac Newton published his three laws of motion in 1687 in his book "Philosophiae Naturalis Principia Mathematica", establishing the laws of motion that describe how objects move.
- Newton's second law states that the acceleration of an object depends on the net force acting on the object and its mass, such that acceleration is directly proportional to net force and inversely proportional to mass.
- The equation for Newton's second law is: Force = mass x acceleration (F=ma), where the SI unit for force is the Newton.

Ppt Newtons First Law

Newton's First Law of Motion, also known as the Law of Inertia, states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. It describes what would happen in a car crash if the driver is not wearing a seatbelt, with the driver continuing to move at the speed of the car and hitting the interior rather than being held by the seatbelt.

Newton’s first law of motion

This PowerPoint presentation discusses Newton's First Law of Motion. It defines force as what causes objects to move, and identifies two types of forces - pushes and pulls. Forces can be balanced or unbalanced, with balanced forces resulting in no motion and unbalanced forces resulting in motion. Newton's First Law, also known as the Law of Inertia, states that an object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force. The presentation provides examples of inertia and discusses how mass relates to inertia.

Law of inertia

The document discusses inertia and how it relates to motion. It defines inertia as the property of an object that resists changes to its motion. It explains that according to Newton's first law, an object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted on by an unbalanced force. Real-world examples are provided to illustrate inertia, such as why seatbelts are important in vehicles.

Motion

The document discusses different types of motion including linear motion, curvilinear motion, rotatory motion, revolution motion, oscillatory motion, and Brownian motion. It provides definitions and examples for each type. Key details covered include that linear motion involves straight-line movement, curvilinear motion curved paths, rotatory motion involves rotation around an axis, and revolution motion revolving around another object. Physics concepts related to motion such as mechanics, kinematics, and dynamics are also briefly introduced.

Newton third law of motion ppt

The document discusses Newton's Third Law of Motion, which states that for every action there is an equal and opposite reaction. It provides several examples to illustrate this law, including rockets propelling upwards as hot gases push down, cars moving forward as wheels push backwards on the road, a baseball hitting a bat causing the bat to push the ball in the opposite direction, and birds staying aloft as their wings push down on the air causing the air to push up with an equal force. Fish are also able to propel forward as their fins push water backwards with an opposing force. In each case, the size and direction of the action and reaction forces are equal and opposite.

Motion speed velocity_ ppt.

The document defines and explains key concepts related to motion including distance, displacement, speed, velocity, and acceleration. It provides equations and examples to calculate speed, velocity, and acceleration. Speed is the distance traveled per unit of time. Velocity includes both speed and direction of motion. Acceleration is the rate of change of velocity with respect to time. The document uses graphs and calculations to illustrate these concepts.

Newton's first law of motion

Newton's First Law of Motion states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. An unbalanced force is a net force that is not equal to zero and causes a change in an object's velocity. Balanced forces have no net force and do not cause a change in velocity, while unbalanced forces have a non-zero net force and do cause a change in velocity. Examples are given of how friction and collisions can cause changes in motion by introducing unbalanced forces.

Light and The Electromagnetic Spectrum

Dispersion of light results in a spectrum of visible light colors from red to violet (ROYGBIV). The document discusses how dispersion occurs when white light passes through water droplets, forming a rainbow. It also explains that higher frequency light waves have shorter wavelengths and greater intensity, bending more when dispersed, while lower frequency red light bends the least. The electromagnetic spectrum encompasses waves of different frequencies beyond the visible spectrum.

3 Laws of Motion

Here are the laws present in each situation:
1. Second law (force causes acceleration)
2. First law (an object at rest stays at rest unless a force acts on it)
3. Third law (for every action there is an equal and opposite reaction)
4. Second law (force causes acceleration)
5. Third law (for every action there is an equal and opposite reaction)
6. First law (an object at rest stays at rest unless a force acts on it)
7. Third law (for every action there is an equal and opposite reaction)
8. Third law (for every action there is an equal and opposite reaction)

Newton's law of gravitation

The document discusses Newton's realization that the force of gravity on Earth must come from Earth itself and must also be what keeps the Moon in orbit. It then explains Newton's third law and how it applies to gravitational forces between objects of different masses. The document also defines the universal law of gravitation, including how the gravitational force between two objects is proportional to their masses and inversely proportional to the square of the distance between them. It further discusses how to calculate gravitational forces and acceleration due to gravity at different locations and distances from Earth.

Newtons law of motion grade 8

Sir Isaac Newton was an English physicist and mathematician born in 1642 who made seminal contributions to the fields of natural philosophy, mathematics, astronomy, and optics. He is most famous for formulating the three laws of motion, including:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction.

THREE LAWS OF MOTION

Sir Isaac Newton discovered the three laws of motion in the late 1600s. The first law states that objects at rest stay at rest and objects in motion stay in motion unless acted on by an unbalanced force. The second law defines the relationship between force, mass, and acceleration using the equation F=ma. The third law states that for every action there is an equal and opposite reaction. These laws describe the motion of all objects and are still used today to understand forces and motion.

Law of inertia

The document discusses Newton's laws of motion through examples and activities. It begins by introducing inertia and having students relate experiences of sudden stops or starts in vehicles. Several activities are described to illustrate inertia, such as placing a coin on paper and removing the paper quickly. The document then summarizes Newton's three laws of motion, defines key terms like force, mass, and acceleration, and provides examples of how the laws apply in various situations like throwing a ball or stubbing a toe.

Work and Energy

The document discusses various physics concepts related to work, energy and power including:
- The definition of work in physics and the formula to calculate work.
- Kinetic energy and its formula. Kinetic energy depends on an object's mass and velocity.
- Gravitational potential energy and its formula. Gravitational potential energy depends on an object's mass, height above ground, and gravitational acceleration.
- The principles of conservation and conversion of energy. Energy cannot be created or destroyed, it can only change form.

Acceleration

Acceleration is the rate of change of an object's velocity. An object accelerates any time its speed or direction changes. Positive acceleration occurs when speed increases, while negative acceleration occurs when speed decreases. Acceleration is calculated by dividing the change in velocity by the time interval over the change occurred. Amusement park rides like rollercoasters produce high speeds and accelerations through steep drops and loops that accelerate riders via gravity, as well as sharp turns that accelerate riders towards the sides of cars.

Newton's second law of motion

Newton's second law of motion states that the acceleration of an object depends on the mass of the object and the net force acting upon it. An unbalanced net force is required to change the velocity of an object, with greater net forces producing greater accelerations. The relationship between force, mass, and acceleration is expressed by the equation Force = Mass x Acceleration.

Ppt Work

Work involves transferring energy by applying a force that causes an object to move in the direction of the force. For work to be done, both a force and movement are required. The amount of work done can be calculated using the formula Work = Force x Distance, where force is measured in Newtons and distance in meters, with the unit of work being the Joule. When work is done, energy is transferred from the object applying the force to the object being moved.

Physics: Potential and Kinetic Energy

Energy is the ability to do work.
Everything that happens in the world uses energy!
Most of the time we can’t see energy, but it is
everywhere around us!

Physical, chemical changes & states of matter.ppt

Physical changes alter the shape or form of a substance but not its chemical composition. Chemical changes alter the molecular structure of a substance and create new substances. States of matter include solids, liquids, gases, and plasmas, which substances can transition between when temperature or other conditions change. A Bose-Einstein condensate is a state of matter that occurs when atoms are cooled to near absolute zero and behave as a single superatom.

Unit 28 - Heat And Temperature

Temperature is a measure of the average kinetic energy of particles, with higher temperatures indicating faster particle motion. There are three main temperature scales: Fahrenheit, Celsius, and Kelvin. Fahrenheit and Celsius are used to measure temperatures experienced in daily life, while Kelvin is used for scientific purposes since it does not have negative values. Heat is transferred between objects through conduction, convection, and radiation. Conduction requires direct contact, convection occurs through fluid movement, and radiation transfers heat via electromagnetic waves.

Nature of waves

The document discusses the nature and characteristics of waves, including defining vibration, amplitude, period, frequency, and simple harmonic motion. It describes how vibrating objects can produce different types of waves, such as electromagnetic waves from vibrating electrons and mechanical waves that require a medium and are either transverse or longitudinal. The characteristics of transverse and longitudinal waves are compared, such as their direction of particle oscillation and motion of the waves through different media.

Newton's second law of motion

- Sir Isaac Newton published his three laws of motion in 1687 in his book "Philosophiae Naturalis Principia Mathematica", establishing the laws of motion that describe how objects move.
- Newton's second law states that the acceleration of an object depends on the net force acting on the object and its mass, such that acceleration is directly proportional to net force and inversely proportional to mass.
- The equation for Newton's second law is: Force = mass x acceleration (F=ma), where the SI unit for force is the Newton.

Law of inertia

Law of inertia

Motion

Motion

Newton third law of motion ppt

Newton third law of motion ppt

Motion speed velocity_ ppt.

Motion speed velocity_ ppt.

Newton's first law of motion

Newton's first law of motion

Light and The Electromagnetic Spectrum

Light and The Electromagnetic Spectrum

3 Laws of Motion

3 Laws of Motion

Newton's law of gravitation

Newton's law of gravitation

Newtons law of motion grade 8

Newtons law of motion grade 8

THREE LAWS OF MOTION

THREE LAWS OF MOTION

Law of inertia

Law of inertia

Work and Energy

Work and Energy

Acceleration

Acceleration

Newton's second law of motion

Newton's second law of motion

Ppt Work

Ppt Work

Physics: Potential and Kinetic Energy

Physics: Potential and Kinetic Energy

Physical, chemical changes & states of matter.ppt

Physical, chemical changes & states of matter.ppt

Unit 28 - Heat And Temperature

Unit 28 - Heat And Temperature

Nature of waves

Nature of waves

Newton's second law of motion

Newton's second law of motion

Ppt Newtons First Law

Newton's First Law of Motion, also known as the Law of Inertia, states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. It describes what would happen in a car crash if the driver is not wearing a seatbelt, with the driver continuing to move at the speed of the car and hitting the interior rather than being held by the seatbelt.

Newton’s first law of motion

This PowerPoint presentation discusses Newton's First Law of Motion. It defines force as what causes objects to move, and identifies two types of forces - pushes and pulls. Forces can be balanced or unbalanced, with balanced forces resulting in no motion and unbalanced forces resulting in motion. Newton's First Law, also known as the Law of Inertia, states that an object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force. The presentation provides examples of inertia and discusses how mass relates to inertia.

newton's laws of motion

- Sir Isaac Newton formulated his three laws of motion in his book Philosophiae Naturalis Principia Mathematica published in 1687.
- Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
- Newton's Second Law states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
- Newton's Third Law states that for every action, there is an equal and opposite reaction.

newton's law of motion

Newton's three laws of motion describe the relationship between an object's motion and the forces acting on it. The first law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force. The second law establishes the relationship between an object's acceleration, its mass, and the net force acting on it. The third law states that for every action, there is an equal and opposite reaction.

Newton's 3 laws of Motion

Sir Isaac Newton discovered the three laws of motion in the late 1600s. Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. Newton's Second Law states that the force on an object equals its mass times its acceleration. Newton's Third Law states that for every action, there is an equal and opposite reaction.

force and laws of motion

The document discusses the concepts of force, balanced and unbalanced forces, Newton's laws of motion, momentum, and conservation of momentum. It defines force and describes its effects on objects. It explains that balanced forces do not produce motion while unbalanced forces do. Newton's three laws of motion are introduced along with definitions of inertia, momentum, and Newton's second law relating force, mass and acceleration. Newton's third law of action and reaction is also covered. Conservation of momentum is defined as the total momentum remaining constant when bodies interact without external forces.

Newton’s Laws of Motion with Real Life Examples

Newton's first law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. It is also known as the law of inertia. Examples given are a hockey puck slowing down due to friction on the ice and a kicked ball in space continuing forever without air resistance or gravity. Newton's second law explains that acceleration is produced by an unbalanced force acting on an object, with greater force needed to accelerate objects with greater mass. Pushing a truck requires more force than pushing a car. Newton's third law states that for every action there is an equal and opposite reaction, such as a boat moving backward when a person jumps

Newton's laws of motion

This document provides an overview of Newton's three laws of motion:
1) An object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force. Inertia is an object's resistance to changes in motion.
2) The acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Acceleration depends on both the net force and the object's mass.
3) For every action force there is an equal and opposite reaction force. Action-reaction force pairs explain various motions like a kayaker moving through water. The action and reaction forces do not cancel each other out because they act on different objects.

Force.Ppt

Force is a push or pull that can cause motion or acceleration. It is measured in Newtons and all forces are interactions between objects. The net force is calculated by adding forces in the same direction and subtracting forces in opposite directions, with an unbalanced net force producing motion.

Force and Motion Review ppt

This document provides an overview of key concepts related to force and motion, including definitions and formulas. It defines a force as a push or pull and notes they have both size and direction. It explains net forces result from combining multiple forces and discusses balanced and unbalanced forces. Key terms like motion, speed, velocity, acceleration, inertia, and Newton's Three Laws of Motion are defined. Formulas for speed, acceleration, weight, and examples of applications of the three laws are also presented.

Inertia

This document discusses the concept of inertia through examples like a coin falling into a tumbler, a passenger on a moving bus, and why seatbelts are important. It defines inertia as the tendency of objects at rest to remain at rest, and of objects in motion to stay in motion, due to their resistance to change. The document suggests mass is related to inertia and poses discussion questions about these examples.

Inertia

Inertia is the property of matter that causes it to resist any change in its motion or state of rest. An object in motion will continue moving at a constant speed in the same direction unless acted upon by an external force, and an object at rest will remain at rest unless some force puts it into motion. Newton's first law of motion states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.

FORCE & MOTION (Inertia) FORM 4

This document discusses the concept of inertia. It defines inertia as an object's tendency to remain at rest or in motion unless acted upon by an external force. It explains that inertia is influenced by mass, with more massive objects having greater inertia. Examples are given of how inertia causes objects and passengers in moving vehicles to continue moving when motion stops suddenly without external forces like seatbelts intervening. Safety measures in vehicles are described that counteract the negative effects of inertia during sudden stops.

Inertia

Students will be able to explain inertia, relate it to mass, and provide examples involving inertia. Inertia is an object's tendency to resist changes in its motion - objects at rest will stay at rest and objects in motion will stay in motion unless acted on by an unbalanced outside force. An object's inertia is directly proportional to its mass - the more mass an object has, the greater its inertia. Examples of inertia include a coin on cardboard pulled quickly, a ladder on a stopping truck, and other situations involving objects in motion experiencing changes.

Newton's Laws of Motion

Presents Newton's three laws of motion to 9th grade Physical Science students with video demonstrations, review questions, and flashcards.

Ppt Forces, Mass, Inertia

Forces can be balanced or unbalanced. Balanced forces occur when two equal forces acting on an object in opposite directions cancel each other out, resulting in no net force and no acceleration. Unbalanced forces occur when the forces are not equal, resulting in a net force that causes the object to accelerate in the direction of the larger force. Inertia is an object's resistance to changes in its motion. Objects with greater mass have greater inertia and are harder to accelerate or change the motion of than objects with less mass.

Force and motion

Forces and motion are discussed in this document. It defines a force as a push or pull and explains that all motion is due to forces acting on objects. Motion is defined as a change in an object's position over time. Balanced and unbalanced forces are compared, with unbalanced forces being able to cause motion. Common forces like gravity, friction, and air resistance are described. Examples are provided to illustrate key concepts around forces.

Types of forces

This document discusses different types of forces. It begins by explaining that moving objects are said to be in motion. It then states that a push or pull acting on an object is called a force. The document goes on to list and briefly describe four main types of forces: gravitational force, magnetic force, nuclear force, and muscular force.

Forces Ppt

The document discusses different types of forces including air resistance, applied, spring, frictional, gravitational, electrical, normal, and magnetic forces. It provides brief definitions and explanations of each force. For example, it states that air resistance is friction between an object and air caused by molecules bumping into moving objects. Frictional forces result from molecular adhesion and surface roughness when two materials are in contact. Gravitational force is defined by Newton's law of universal gravitation. Magnetic force differs from gravitational and electrical forces in that its potential energy comes from an electrical field over time.

INERTIA for Grade 7

Newton's first law of motion states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. This concept is known as inertia. Inertia is the tendency of objects to resist any change in their motion. The experiments showed that coins did not move when the bill was pulled due to inertia, and the spinning egg continued spinning when touched due to inertia. The more mass an object has, the more inertia it has and the harder it is to change its motion. Examples of inertia included sauce continuing to move in a bottle when it stops suddenly and passengers continuing forward when a car brakes suddenly.

Ppt Newtons First Law

Ppt Newtons First Law

Newton’s first law of motion

Newton’s first law of motion

newton's laws of motion

newton's laws of motion

newton's law of motion

newton's law of motion

Newton's 3 laws of Motion

Newton's 3 laws of Motion

force and laws of motion

force and laws of motion

Newton’s Laws of Motion with Real Life Examples

Newton’s Laws of Motion with Real Life Examples

Newton's laws of motion

Newton's laws of motion

Force.Ppt

Force.Ppt

Force and Motion Review ppt

Force and Motion Review ppt

Inertia

Inertia

Inertia

Inertia

FORCE & MOTION (Inertia) FORM 4

FORCE & MOTION (Inertia) FORM 4

Inertia

Inertia

Newton's Laws of Motion

Newton's Laws of Motion

Ppt Forces, Mass, Inertia

Ppt Forces, Mass, Inertia

Force and motion

Force and motion

Types of forces

Types of forces

Forces Ppt

Forces Ppt

INERTIA for Grade 7

INERTIA for Grade 7

law of torts rohit

This document discusses Isaac Newton's major contributions and laws of motion. It covers:
- Newton formulated calculus, discovered that white light is composed of rainbow colors, invented the reflecting telescope, established the laws of motion, and developed the theory of universal gravitation.
- Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
- Newton's Second Law states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object

0708 laws of_motion

this slide serves as a guidance to learners, in terms of knowledge and critical thinking. lastly it tells about the foundation of motion. lastly learners can use this knowledge to their reality

0708 laws of_motion

This document discusses Isaac Newton's major contributions and laws of motion. It covers:
- Newton formulated calculus, discovered that white light is composed of rainbow colors, invented the reflecting telescope, established the laws of motion, and developed the theory of universal gravitation.
- Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
- Newton's Second Law states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object

0708_laws_of_motion.ppt

This document discusses Isaac Newton's major scientific contributions and laws of motion. It explains Newton's three laws of motion: 1) Objects at rest stay at rest and objects in motion stay in motion unless acted upon by an unbalanced force. 2) Force equals mass times acceleration. 3) For every action, there is an equal and opposite reaction. It provides examples of how these laws apply to objects like balls, books, rockets, and describes concepts like inertia, balanced forces, unbalanced forces, and terminal velocity. Friction and gravity are identified as unbalanced forces that act on moving objects.

0708_laws_of_motion.ppt

This document discusses Isaac Newton's major scientific contributions and laws of motion. It explains Newton's three laws of motion: 1) Objects at rest stay at rest and objects in motion stay in motion unless acted upon by an unbalanced force. 2) Force equals mass times acceleration. 3) For every action there is an equal and opposite reaction. It provides examples of how these laws apply to objects like balls, books, rockets, and bugs colliding with surfaces. Friction and gravity are identified as unbalanced forces that cause moving objects to eventually stop.

Newton Lows - Explained.pptx

Force and Mass;
Types of Forces;
Contact forces;
Field forces;
Newtons laws of motion;
Explanation;
It’s not Newton’s Laws;
Its Rishi Kanad laws;
Proof of stolen three laws of motion; how newton theft the laws ?
newton a modern thief?
laws of motion by Rishi Kanad
Vaisheshika - laws of motion
Comparision - Kanad rishi vs Newton
References for theft

NEWTON.pptx

Newton developed his three laws of motion which describe the motion of objects. The first law states that objects at rest stay at rest and objects in motion stay in motion unless acted on by an unbalanced force. The second law states that force equals mass times acceleration. The third law states that for every action there is an equal and opposite reaction. The document provides examples and explanations of Newton's laws of motion.

Lesson 1_Newton's Laws of Motion.ppt

This document discusses Newton's three laws of motion:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction.
It provides examples and explanations of each law, focusing on concepts like inertia, balanced vs unbalanced forces, mass, acceleration, and action-reaction force pairs.

1 Force and Motion Lesson.ppt

Forces and motion are described. A force is anything that causes an object's motion to change, either by speeding it up, slowing it down, or changing direction. There are several types of forces including gravity, friction, magnetism, and electricity. Newton's three laws of motion explain how forces affect the motion of objects. The first law states that objects at rest will stay at rest and moving objects will keep moving unless a force acts upon them. The second law relates force, mass, and acceleration. The third law states that for every action force there is an equal and opposite reaction force.

Sehs 4.3.biomechanics iii

Newton's three laws of motion describe the relationship between an object's motion and the forces acting upon it. The first law states that objects at rest will stay at rest and moving objects will keep moving unless acted on by an outside force. The second law relates the acceleration of an object to the net force acting on it and its mass. The third law states that for every action force there is an equal and opposite reaction force. These laws help explain phenomena in sports such as how starting blocks aid sprinting and how force generation allows football players to affect other players' motions.

newtons laws of_motion

This document discusses Isaac Newton's three laws of motion and related concepts like inertia, balanced forces, unbalanced forces, and gravity. Newton's three laws are: 1) Objects at rest tend to stay at rest and objects in motion tend to stay in motion unless acted upon by an unbalanced force. 2) Force equals mass times acceleration. 3) For every action there is an equal and opposite reaction. The document provides examples and explanations of how these laws apply to real-world situations like a ball rolling to a stop due to friction or an object in space propelling itself back to a shuttle by throwing an object.

Forces and motion ch3.1

This document provides an overview of forces and motion, including Newton's three laws of motion. It defines key terms like force, mass, weight, and inertia. It explains that force is needed to cause an object to start or stop moving, while mass resists changes in motion. It also discusses how gravity affects all objects, but air resistance only affects lower-mass objects like feathers at terminal velocity. Newton's three laws are that unbalanced forces cause acceleration, forces cause acceleration proportional to mass, and for every action there is an equal and opposite reaction.

0708 laws of_motion leks

This document provides information about Newton's laws of motion. It discusses Newton's first law of inertia, which states that an object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force. It also discusses Newton's second law, which defines the relationship between force, mass and acceleration using the equation F=ma. Examples are given to illustrate both laws, such as how an unbalanced force like gravity would cause a golf ball at rest to accelerate once hit, or how different masses would require different forces to accelerate at the same rate.

Newtons_Laws.ppt

Newton's three laws of motion are summarized as follows:
1) An object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction.

Newtons_Laws.ppt

Newton's three laws of motion are summarized as follows:
1) Newton's First Law states that objects at rest will stay at rest and objects in motion will stay in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2) Newton's Second Law establishes the relationship between an object's mass, its acceleration, and the applied force as F=ma.
3) Newton's Third Law describes that for every action force there is an equal and opposite reaction force.

Newtons_Laws.ppt

Newton's three laws of motion are summarized as follows:
1) Newton's First Law states that objects at rest will stay at rest and objects in motion will stay in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2) Newton's Second Law establishes the relationship between an object's mass, its acceleration, and the applied force as F=ma.
3) Newton's Third Law describes that for every action force there is an equal and opposite reaction force.

Newtons_Laws (1).ppt

Newton's three laws of motion are summarized as follows:
1) An object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction.

Newton's Law of Motion

Sir Isaac Newton discovered the three laws of motion. Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. Newton's Second Law states that the force on an object equals its mass times its acceleration. Newton's Third Law states that for every action, there is an equal and opposite reaction.

Newtons_Laws.ppt

Newton's three laws of motion are summarized as follows:
1. An object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
2. The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3. For every action, there is an equal and opposite reaction.

Discovering newtons laws and its basic uses in daily life.

Sir Isaac Newton discovered the three laws of motion. Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. Newton's Second Law states that the force on an object equals its mass times its acceleration. Newton's Third Law states that for every action, there is an equal and opposite reaction.

law of torts rohit

law of torts rohit

0708 laws of_motion

0708 laws of_motion

0708 laws of_motion

0708 laws of_motion

0708_laws_of_motion.ppt

0708_laws_of_motion.ppt

0708_laws_of_motion.ppt

0708_laws_of_motion.ppt

Newton Lows - Explained.pptx

Newton Lows - Explained.pptx

NEWTON.pptx

NEWTON.pptx

Lesson 1_Newton's Laws of Motion.ppt

Lesson 1_Newton's Laws of Motion.ppt

1 Force and Motion Lesson.ppt

1 Force and Motion Lesson.ppt

Sehs 4.3.biomechanics iii

Sehs 4.3.biomechanics iii

newtons laws of_motion

newtons laws of_motion

Forces and motion ch3.1

Forces and motion ch3.1

0708 laws of_motion leks

0708 laws of_motion leks

Newtons_Laws.ppt

Newtons_Laws.ppt

Newtons_Laws.ppt

Newtons_Laws.ppt

Newtons_Laws.ppt

Newtons_Laws.ppt

Newtons_Laws (1).ppt

Newtons_Laws (1).ppt

Newton's Law of Motion

Newton's Law of Motion

Newtons_Laws.ppt

Newtons_Laws.ppt

Discovering newtons laws and its basic uses in daily life.

Discovering newtons laws and its basic uses in daily life.

Conservation of energy

This document discusses the conservation of energy. It explains that energy cannot be created or destroyed, but rather is transferred from one form to another. Some key points made include:
- Energy exists in various forms including kinetic, potential, chemical, thermal, and mechanical.
- Mechanical energy is the sum of kinetic and potential energy in a system. It remains constant as energy transforms between these two forms, for example as an object gains kinetic energy while losing gravitational potential energy.
- The law of conservation of energy states that the total energy in an isolated system is constant. Energy transforms between forms through processes like friction, but the overall quantity remains the same.

Radiation ppt

Radiation and radioactive waste can have biological effects on animals, plants, and humans. Radioactive waste is material contaminated by radio nuclides, which are unstable atoms that decay and emit radiation. Exposure to ionizing radiation depends on the type and amount of radiation, dose received, and exposure conditions. While low doses may cause no immediate harm, high doses can cause radiation sickness, cancer, and genetic effects in the short and long term. Radiation can damage plants' growth, development, and genetic makeup. In humans, high radiation exposure can cause initial symptoms like nausea and vomiting and higher doses may cause hair loss, organ damage, and death in some cases. Long term effects include increased risk of cancers and diseases. Proper

Heat transfer: thermodynamics

This document discusses different methods of heat transfer: conduction, convection, and radiation.
Conduction involves the direct transfer of heat between objects in contact. Good conductors like metals allow rapid heat transfer while insulators like wood and plastic impede it. Convection refers to heat transfer through fluid motion, like hot air rising. Radiation transfers heat through electromagnetic waves and does not require a medium, like the sun warming the Earth. Experiments are described to show how different materials conduct heat at different rates. The key methods of heat transfer are defined and examples are given of heat transferring through various natural processes and everyday situations.

properties of light

The document discusses several key properties of light:
1) Interference and polarization of light are examined through experiments like Young's slits and using polarizers. Interference creates light and dark fringes depending on the path difference between waves.
2) Huygens' principle is introduced as explaining how secondary wavelets propagate light in a manner consistent with laws of reflection and refraction. Each point on a wavefront acts as a secondary source.
3) Polarization occurs when unpolarized light passes through a filter, causing vibrations of the electric field to lie in one plane rather than randomly oriented planes. Crossed polarizers can eliminate transmitted light.

pinhole camera product oriented assessment - rubric

The document outlines the objectives, tasks, and learning competencies for a physics project to construct a pinhole camera. Students are asked to build a pinhole camera using materials like a shoebox, tape, paper, and a push pin. Their final product will be evaluated on the appropriate selection of construction materials, the care taken during assembly, and how well they test and modify the camera's images. Performance will be scored on a scale from 1 to 5 points across these three criteria.

work energy theorem and kinetic energy

Karen Adelan presented on the topic of classical mechanics and energy. Some key points:
- Energy is a conserved quantity that can change forms but is never created or destroyed. It is useful for describing motion when Newton's laws are difficult to apply.
- Kinetic energy is the energy of motion and depends on an object's mass and speed. The work-kinetic energy theorem states that the net work done on an object equals the change in its kinetic energy.
- Potential energy is the energy an object possesses due to its position or state. The work done by a constant force equals the product of force, displacement, and the cosine of the angle between them.

Conservation of energy

Conservation of energy

Radiation ppt

Radiation ppt

Heat transfer: thermodynamics

Heat transfer: thermodynamics

properties of light

properties of light

pinhole camera product oriented assessment - rubric

pinhole camera product oriented assessment - rubric

work energy theorem and kinetic energy

work energy theorem and kinetic energy

How to Build a Module in Odoo 17 Using the Scaffold Method

Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.

What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...

What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen

Advanced Java[Extra Concepts, Not Difficult].docx

This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.

Life upper-Intermediate B2 Workbook for student

English B2 for student at intermediate level

How to Make a Field Mandatory in Odoo 17

In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.

How to Add Chatter in the odoo 17 ERP Module

In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.

Chapter 4 - Islamic Financial Institutions in Malaysia.pptx

Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia

This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
C1 Rubenstein AP HuG xxxxxxxxxxxxxx.pptx

C1 Rubenstein

Walmart Business+ and Spark Good for Nonprofits.pdf

"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"

Your Skill Boost Masterclass: Strategies for Effective Upskilling

Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan

Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.South African Journal of Science: Writing with integrity workshop (2024)

South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa

A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...

BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection

https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdNatural birth techniques - Mrs.Akanksha Trivedi Rama University

Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.

Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcExecutive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion

Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.

Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...

Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)

This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3

RPMS Template 2023-2024 by: Irene S. Rueco

Pengantar Penggunaan Flutter - Dart programming language1.pptx

Pengantar Penggunaan Flutter - Dart programming language1.pptx

How to Build a Module in Odoo 17 Using the Scaffold Method

How to Build a Module in Odoo 17 Using the Scaffold Method

What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...

What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...

Advanced Java[Extra Concepts, Not Difficult].docx

Advanced Java[Extra Concepts, Not Difficult].docx

MARY JANE WILSON, A “BOA MÃE” .

MARY JANE WILSON, A “BOA MÃE” .

Life upper-Intermediate B2 Workbook for student

Life upper-Intermediate B2 Workbook for student

The basics of sentences session 6pptx.pptx

The basics of sentences session 6pptx.pptx

How to Make a Field Mandatory in Odoo 17

How to Make a Field Mandatory in Odoo 17

How to Add Chatter in the odoo 17 ERP Module

How to Add Chatter in the odoo 17 ERP Module

Chapter 4 - Islamic Financial Institutions in Malaysia.pptx

Chapter 4 - Islamic Financial Institutions in Malaysia.pptx

C1 Rubenstein AP HuG xxxxxxxxxxxxxx.pptx

C1 Rubenstein AP HuG xxxxxxxxxxxxxx.pptx

Smart-Money for SMC traders good time and ICT

Smart-Money for SMC traders good time and ICT

Walmart Business+ and Spark Good for Nonprofits.pdf

Walmart Business+ and Spark Good for Nonprofits.pdf

Your Skill Boost Masterclass: Strategies for Effective Upskilling

Your Skill Boost Masterclass: Strategies for Effective Upskilling

South African Journal of Science: Writing with integrity workshop (2024)

South African Journal of Science: Writing with integrity workshop (2024)

BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...

BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...

Natural birth techniques - Mrs.Akanksha Trivedi Rama University

Natural birth techniques - Mrs.Akanksha Trivedi Rama University

Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion

Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion

Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...

Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...

RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3

RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3

Pengantar Penggunaan Flutter - Dart programming language1.pptx

Pengantar Penggunaan Flutter - Dart programming language1.pptx

- 1. Newton’s First Law of Motion
- 2. First we need to define the word FORCE: • The cause of motion (what causes objects to move) • Two types of forces – Pushes – Pulls Slide from www.science-class.net
- 3. Forces may be balanced or unbalanced • Balanced forces – all forces acting on an object are equal – There is NO MOTION • Unbalanced forces – one or more forces acting on an object are stronger than others – There is MOTION • A NET FORCE
- 4. Objects at Rest • Objects at rest tend to stay at rest unless acted upon by a force. [push or pull] • Newton described this tendency as inertia. • Inertia can be described as the tendency of an object to keep doing whatever’s it’s doing.
- 5. Mass & Inertia • Mass is the amount of matter in an object. It is measured in KILOGRAMS. • The more MASS an object has, the more INERTIA the object has. • Bigger objects are harder to start & stop Which vehicle has more inertia? Slide from www.science-class.net
- 6. What about objects that are already in motion? • Newton stated that objects in motion tend to stay in motion until acted upon by a force (or hits it.)
- 7. Newton’s 1st Law (also known as the law of inertia) • A moving object moves in a straight line with constant speed unless a force acts on it. • The tendency of an object at rest to remain at rest and an object in motion to remain in motion unless acted upon by an unbalanced force. • Objects do not change their motion unless a force acts on them
- 8. The truck is in motion. What is the force that causes it to stop? The push of the stopped car. The car is at rest. What is the force that causes it to move? The push of the truck. Slide from www.science-class.net
- 9. Newton’s Second Law • Force equals mass times acceleration. • F = ma
- 10. Newton’s Second Law Force = Mass x Acceleration Force is measured in Newtons ACCELERATION of GRAVITY(Earth) = 9.8 m/s2 Weight (force) = mass x gravity (Earth) Moon’s gravity is 1/6 of the Earth’s If you weigh 420 Newtons on earth, what will you weigh on the Moon? 70 Newtons
- 11. Newton’s Second Law • WEIGHT is a measure of the force of ________ on the mass of an object • measured in _____________Newton
- 12. Newton’s Second Law • One rock weighs 5 Newtons. • The other rock weighs 0.5 • Newtons. How much more • force will be required to • accelerate the first rock • at the same rate as the second rock? Ten times as much
- 13. FOR EVERY ACTION THERE IS AN EQUAL AND OPPOSITE REACTION. Newton’s Third Law
- 14. Newton’s 3rd Law • For every action there is an equal and opposite reaction.
- 15. Think about it . . . What happens if you are standing on a skateboard or a slippery floor and push against a wall? You slide in the opposite direction (away from the wall), because you pushed on the wall but the wall pushed back on you with equal and opposite force. Why does it hurt so much when you stub your toe? When your toe exerts a force on a rock, the rock exerts an equal force back on your toe. The harder you hit your toe against it, the more force the rock exerts back on your toe (and the more your toe hurts).
- 16. Review • Newton’s First Law: • Objects in motion tend to stay in motion and objects at rest tend to stay at rest unless acted upon by an unbalanced force. • Newton’s Second Law: • Force equals mass times acceleration (F = ma). • Newton’s Third Law: • For every action there is an equal and opposite reaction.
- 17. Newton's Laws • 1stlaw: Homer is large and has much mass, therefore he has much inertia. Friction and gravity oppose his motion. • 2nd law: Homer’s mass x 9.8 m/s/s equals his weight, which is a force. • 3rd law: Homer pushes against the ground and it pushes back.