1) The document compares a new method of focal plane array (FPA) infrared imaging to the established synchrotron-based method for analyzing leaf tissue at a microscopic chemical level.
2) An experiment using transverse leaf sections from Eucalyptus botryoides found that the FPA method took around 2 minutes to image an area, while the synchrotron technique required approximately 8 hours to map the same area.
3) Both methods produced similar infrared images and maps that differentiated the various tissue types based on their macromolecular chemistry. While the synchrotron method had a higher signal-to-noise ratio and potentially better resolution, the FPA method had significant advantages in acquisition time,
This document discusses metallic nanoparticles and their applications in biomedical sciences and engineering. Metallic nanoparticles such as iron oxide nanoparticles, gold nanoparticles, and silver nanoparticles have unique properties like high surface-to-volume ratio that make them useful for applications in imaging, drug delivery, and therapy. Various methods for synthesizing these nanoparticles like chemical coprecipitation and conjugating them with ligands allow them to be used as contrast agents for MRI, CT, and other imaging modalities. Targeted delivery of nanoparticles can help image and treat diseases like cancer in a non-invasive manner.
Nanoparticles between 1-100 nanometers in size are widely used in pharmaceutical analysis. They are used in (1) electrochemical analysis by constructing sensors and enhancing electron transfer, (2) clinical analysis by targeting biomarkers and improving detection sensitivity, and (3) separation analysis by acting as separation agents. Nanoparticles are also used to (4) enhance laser induced breakdown spectroscopy by lowering the breakdown threshold. They have various other applications including diagnostics, targeted drug delivery, and as biosensors and biolabels.
Quantum dots have unique optical properties that make them useful fluorescent probes for cellular and in vivo imaging. They have broad absorption spectra and narrow, size-dependent emission spectra. Making hydrophobic quantum dots water-soluble involves coating them with bifunctional ligands, encapsulating them in micelles or liposomes, or polymer coating. Quantum dots can be conjugated to biomolecules like avidin and used for multiplexed imaging. They have advantages over organic dyes like greater photostability and brightness. Quantum dots have been used for various cellular imaging applications as well as in vivo imaging of vasculature, receptors, and other targets.
nanotechnology in drug delivery and diagnostic Saurabh Sharma
Nanotechnology is increasingly being used in drug delivery and diagnostics due to advantages like targeted drug delivery, improved solubility and stability, and constant drug release kinetics. Key nanomaterials used include nanoparticles, liposomes, dendrimers, nanoshells, and nanosensors. These materials can incorporate drugs for delivery or be functionalized for diagnostic applications like detecting biomarkers or pathogens. Advanced nanotechnologies like atomic force microscopy and cantilever arrays also provide powerful tools for precision diagnostics. Overall, nanotechnology is enhancing drug delivery methods and enabling highly sensitive disease detection.
The document provides an overview of characterization techniques for nanoparticles. It discusses how characterization refers to studying the features, composition, structure and properties of materials. Nanoparticles are defined as particles between 1 to 100 nanometers in at least one dimension. Their small size results in unique physical, chemical and biological properties compared to bulk materials. A variety of characterization techniques are described including optical microscopy techniques like dynamic light scattering, electron microscopy techniques like scanning electron microscopy, and other methods like photon spectroscopy. The techniques allow analyzing properties of nanoparticles like size, shape, structure and chemical composition.
Nanoparticles for magnetic resonance imagingAlex Chris
This document discusses the use of various types of nanoparticles for molecular imaging applications such as magnetic resonance imaging (MRI) and computer tomography (CT). It describes how gold nanoparticles, quantum dots, iron oxide nanoparticles, carbon nanotubes, dendrimers, and other nanoparticles are being investigated and developed as contrast agents for molecular imaging due to their tunable properties and potential for functionalization and targeted delivery. For example, one study demonstrated how antibody-conjugated gold nanorods could selectively target and image squamous cell carcinoma tumors using CT. Overall, the controlled properties of engineered nanoparticles show promise for improving molecular imaging techniques.
This document discusses metallic nanoparticles and their applications in biomedical sciences and engineering. Metallic nanoparticles such as iron oxide nanoparticles, gold nanoparticles, and silver nanoparticles have unique properties like high surface-to-volume ratio that make them useful for applications in imaging, drug delivery, and therapy. Various methods for synthesizing these nanoparticles like chemical coprecipitation and conjugating them with ligands allow them to be used as contrast agents for MRI, CT, and other imaging modalities. Targeted delivery of nanoparticles can help image and treat diseases like cancer in a non-invasive manner.
Nanoparticles between 1-100 nanometers in size are widely used in pharmaceutical analysis. They are used in (1) electrochemical analysis by constructing sensors and enhancing electron transfer, (2) clinical analysis by targeting biomarkers and improving detection sensitivity, and (3) separation analysis by acting as separation agents. Nanoparticles are also used to (4) enhance laser induced breakdown spectroscopy by lowering the breakdown threshold. They have various other applications including diagnostics, targeted drug delivery, and as biosensors and biolabels.
Quantum dots have unique optical properties that make them useful fluorescent probes for cellular and in vivo imaging. They have broad absorption spectra and narrow, size-dependent emission spectra. Making hydrophobic quantum dots water-soluble involves coating them with bifunctional ligands, encapsulating them in micelles or liposomes, or polymer coating. Quantum dots can be conjugated to biomolecules like avidin and used for multiplexed imaging. They have advantages over organic dyes like greater photostability and brightness. Quantum dots have been used for various cellular imaging applications as well as in vivo imaging of vasculature, receptors, and other targets.
nanotechnology in drug delivery and diagnostic Saurabh Sharma
Nanotechnology is increasingly being used in drug delivery and diagnostics due to advantages like targeted drug delivery, improved solubility and stability, and constant drug release kinetics. Key nanomaterials used include nanoparticles, liposomes, dendrimers, nanoshells, and nanosensors. These materials can incorporate drugs for delivery or be functionalized for diagnostic applications like detecting biomarkers or pathogens. Advanced nanotechnologies like atomic force microscopy and cantilever arrays also provide powerful tools for precision diagnostics. Overall, nanotechnology is enhancing drug delivery methods and enabling highly sensitive disease detection.
The document provides an overview of characterization techniques for nanoparticles. It discusses how characterization refers to studying the features, composition, structure and properties of materials. Nanoparticles are defined as particles between 1 to 100 nanometers in at least one dimension. Their small size results in unique physical, chemical and biological properties compared to bulk materials. A variety of characterization techniques are described including optical microscopy techniques like dynamic light scattering, electron microscopy techniques like scanning electron microscopy, and other methods like photon spectroscopy. The techniques allow analyzing properties of nanoparticles like size, shape, structure and chemical composition.
Nanoparticles for magnetic resonance imagingAlex Chris
This document discusses the use of various types of nanoparticles for molecular imaging applications such as magnetic resonance imaging (MRI) and computer tomography (CT). It describes how gold nanoparticles, quantum dots, iron oxide nanoparticles, carbon nanotubes, dendrimers, and other nanoparticles are being investigated and developed as contrast agents for molecular imaging due to their tunable properties and potential for functionalization and targeted delivery. For example, one study demonstrated how antibody-conjugated gold nanorods could selectively target and image squamous cell carcinoma tumors using CT. Overall, the controlled properties of engineered nanoparticles show promise for improving molecular imaging techniques.
Super paramagnetic iron oxide nanoparticles (SPIONs) are being researched for applications in cancer chemotherapy, including for drug delivery, hyperthermia treatment of tumors, and as contrast agents for magnetic resonance imaging (MRI). SPIONs have advantages such as biocompatibility and an ability to be guided to tumor sites using magnetic fields. However, coating is needed to reduce aggregation and toxicity. Research is exploring conjugating drugs and targeting ligands to SPIONs to selectively deliver higher doses of chemotherapy to tumors while reducing side effects.
Preparation and characterization of nimesulide loaded cellulose acetate hydro...Jing Zang
This document summarizes a study that prepared nimesulide-loaded cellulose acetate hydrogen phthalate nanoparticles using the salting out technique. The effect of drug concentration and polymer concentration on nanoparticle size, shape, and uniformity was investigated. Increasing the polymer concentration decreased nanoparticle size and improved uniformity. Drug concentration did not affect size. Nanoparticles were characterized using SEM, zeta potential analysis, and photon correlation spectroscopy. The mean nanoparticle size was 548.2 nm with a zeta potential of -19.8 mV, indicating stability.
The document discusses small animal imaging techniques. It provides an overview of various imaging modalities including their resolutions and applications. Specific techniques covered include bioluminescence imaging, fluorescence imaging, computed tomography, magnetic resonance imaging, positron emission tomography, and single photon emission computed tomography. The document also discusses fluorescent probes and reagents used for small animal imaging including near-infrared dyes, quantum dots, fluorescent microspheres, and protease-activatable probes. Potential applications highlighted include tumor detection, vascular imaging, and monitoring of enzyme activity.
This document discusses microautoradiography, which is a technique used to visualize the distribution of radioactive substances in biological samples at a microscopic level. It involves incubating tissue with a radioactive ligand, then exposing photographic film or emulsion to the radioactivity emitted. This allows the localization of the radioactive material within subcellular structures. The technique provides high resolution and sensitivity. It has various applications in fields like cell biology, pharmacology, and molecular biology to study processes like cell division, drug targeting, and DNA/RNA localization.
Rita Schwieters conducted research on investigating the properties of gold nanoparticles (AuNPs) under the advisement of Dr. Chris Sorensen and grad student Jeff Powell. The research measured the enthalpy of dissolution for 5nm AuNPs ligated with dodecanethiol in a solution of dodecanethiol and toluene. Transition electron microscopy was used to determine the average particle diameter was 5.5nm with a 16% standard deviation. Analysis of the data collected at different temperatures allowed for the calculation of the enthalpy of dissolution and from that the interparticle potential and melting point, though adjustments are still needed to the model. Future work is needed to further understand the rejuven
This document discusses the use of gold nanoparticles for the treatment of cancer. It begins with an introduction to cancer and the side effects of traditional chemotherapy and radiation treatments. It then discusses how nanotechnology can be used to develop targeted drug delivery systems using gold nanoparticles. The document outlines the properties of gold nanoparticles that make them suitable for photothermal therapy applications for cancer treatment, including their ability to absorb light and generate heat. It also discusses the different types of gold nanoparticles, methods for synthesizing and characterizing them, and their potential applications and progress in cancer treatment.
NANOPARTICLES IN CANCER DIAGNOSIS AND TREATMENTKeshav Das Sahu
This document discusses the use of nanoparticles in cancer diagnosis and treatment. It introduces several types of nanoparticles that can be used, including nanoshells, dendrimers, quantum dots, superparamagnetic nanoparticles, nanowires, nanodiamonds, and nanosponges. Nanoshells and dendrimers are highlighted as promising for targeted drug delivery. The document also discusses magnetic resonance imaging contrast agents, including both paramagnetic gadolinium agents and superparamagnetic iron oxide nanoparticles, which can enhance MRI images and improve cancer diagnosis.
THE USE OF MICRO- AND MACRO-AUTORADIOGRAPHY TO STUDY THE TISSUE DISTRIBUTION ...QPS Holdings, LLC
Objectives:
To educate about the methods used to perform Quantitative Whole-Body Autoradiography (QWBA) and Micro-Autoradiography (MARG) to facilitate an understanding of the benefits and limitations of the techniques.
To present examples of how QWBA and MARG have been used to quantitatively and qualitatively evaluate drugs.
Potential application of nanoparticles in medicineBangaluru
Nanoparticle applications in management and control of serious diseases such as cancers are promising. Nanoparticles target
the drugs delivery system specifically to malignant cells. They are able to penetrate the stratum corneum barrier of the skin and thus have been used
widely as a treatment tool in skin cancer imaging, vaccine delivery via the skin, antimicrobials and wound healing. Recently, nanoparticles were used in
lung diseases through their ability to accumulation the drugs in the diseased lung areas by providing a local inhalation delivery of active components.
Lightoptical nanoscopy for the use in biomedical applications and material sciences, detection in attomolar concentrations
* Use of standard fluorophores like GFP, RFP, YFP, Alexa, Fluorescein (no photoswitch necessary)
2CLM Two Color Localisation microscopy in the nanoscale
* Optical resolution 10 nm in 2D, 40 nm in 3D
* Very fast in processing, complete picture (2000 images) with processing in 3 minutes
This document reviews the use of quantum dots for bioimaging applications. It discusses:
1) The synthesis of quantum dots, particularly CdSe/ZnS core/shell structures, and methods to tune their optical properties.
2) Modification of quantum dot surfaces with ligands to make them water soluble and biocompatible while maintaining fluorescence. Common surface modifications include adding carboxylic acids, silica shells, and encapsulation in micelles.
3) Applications of quantum dots in biology, including labeling of proteins and targeting of specific cell surface receptors due to their photostability and ability to detect multiple signals simultaneously.
This document describes how laser-induced breakdown spectroscopy (LIBS) was used to generate 3D elemental images of nanoparticle distribution in biological tissue at multiple scales. Sliced kidney tissue sections were mapped using LIBS to reconstruct the global nanoparticle distribution throughout the entire organ. Higher resolution LIBS imaging was also performed on specific regions of interest by repeatedly ablating the same tissue volume. This proof-of-concept study demonstrates that LIBS can quantitatively image both endogenous and exogenous elements in 3D within entire organs.
This document discusses various nanotechnology approaches for drug delivery, including nanoparticles for encapsulating and delivering drugs. It describes several types of nanoparticles - lipid-based, polymer-based, metallic, biological - that can be used for targeted drug delivery. It also highlights some achievements of nanotechnology in developing improved drug formulations, as well as challenges in the field and priority research areas like cancer nanotechnology.
Nanoparticles show promise for drug delivery applications in the pharmaceutical industry. They can increase drug solubility and bioavailability, target drug delivery, and potentially allow drugs to avoid generic competition through novel delivery methods. In particular, niosomes, nanocrystals, nanoclusters, micelles, and other nanoscale carriers are being investigated for controlled and targeted drug delivery using biocompatible polymers, lipids, and surfactants. These nanocarriers aim to improve drug therapies by more efficient transport and release of pharmaceutical compounds in the body.
Nanoparticle of plant extract: A Novel approach for cancer therapyroshan telrandhe
Presented in NATIONAL CONFERENCE ;A Phytomedicine : A Novel Approach For Cancer Treatment. Sponsered By Indian Councial Of Medical Research, Delhi. OrganisedBy KamlaNehru College Of Pharmacy, Butibori, Nagpur441108, Maharastra, India. ON 25 & 26 March 2017
Magnetic nanoparticles applications and bioavailability for cancer therapyPravin Chinchole
Magnetic nanoparticles can be used for cancer therapy applications. They can be coated or encapsulated to be bioavailable. When exposed to an external alternating magnetic field, the nanoparticles generate heat through hysteresis, friction, and relaxation effects. This localized hyperthermia can directly kill cancer cells or induce heat shock proteins to stimulate anti-cancer immunity. The nanoparticles can also be used for magnetic drug delivery, where drugs are attached and targeted to tumor sites using an external magnetic field, requiring lower doses than conventional treatment and reducing side effects. Studies have shown magnetic nanoparticle hyperthermia and drug delivery can significantly reduce tumor growth in animal models.
Use of nanotechnology in medical science (pros and cons)Vikram Kataria
here in this presentation I had shared the basic information regarding use of nanotechnology in medical science and what wonders and improvements that nano technology did in the field of medical science.
This document discusses the properties and medical applications of nanoparticles. It begins by defining nanoparticles and nanotechnology. It then discusses various methods for synthesizing nanoparticles and their unique properties at the nanoscale. The document outlines several medical applications of nanoparticles, including drug delivery, cancer treatment, surgery, and antibiotic resistance. It provides examples of how nanoparticles can be used for targeted drug delivery, photodynamic therapy, MRI contrast agents, and more. The conclusion reiterates that nanoparticles have increased surface area and novel properties that can benefit medical applications.
Quantum dots have unique spectral properties that make them useful fluorescent probes for cellular imaging. They can be made water-soluble and conjugated to biomolecules for targeting specific cells and structures. Quantum dots have advantages over traditional fluorescent probes like greater photostability and the ability to multiplex imaging. They have been used for in vitro and in vivo imaging applications like labeling cancer cells, visualizing capillaries and receptors, and observing subcellular structures in real-time. While useful imaging tools, quantum dots have limitations like potential toxicity that must be addressed for in vivo use.
Fluorescence recovery after photo bleachinganasshokor
FRAP (Fluorescence Recovery After Photobleaching) is a technique used to study the dynamics of molecules in living cells. It involves photobleaching a fluorescent marker in a region of the cell using a focused laser beam. The diffusion and movement of non-bleached fluorescent molecules into the bleached area is then monitored over time, allowing calculation of diffusion coefficients. Considerations in FRAP analysis include the degree of bleaching, bleach/recovery times, beam radius, and photobleaching artifacts. FRAP has various applications such as determining connectivity between cellular compartments using FLIP (Fluorescence Loss In Photobleaching) and quantifying transport between compartments.
Super paramagnetic iron oxide nanoparticles (SPIONs) are being researched for applications in cancer chemotherapy, including for drug delivery, hyperthermia treatment of tumors, and as contrast agents for magnetic resonance imaging (MRI). SPIONs have advantages such as biocompatibility and an ability to be guided to tumor sites using magnetic fields. However, coating is needed to reduce aggregation and toxicity. Research is exploring conjugating drugs and targeting ligands to SPIONs to selectively deliver higher doses of chemotherapy to tumors while reducing side effects.
Preparation and characterization of nimesulide loaded cellulose acetate hydro...Jing Zang
This document summarizes a study that prepared nimesulide-loaded cellulose acetate hydrogen phthalate nanoparticles using the salting out technique. The effect of drug concentration and polymer concentration on nanoparticle size, shape, and uniformity was investigated. Increasing the polymer concentration decreased nanoparticle size and improved uniformity. Drug concentration did not affect size. Nanoparticles were characterized using SEM, zeta potential analysis, and photon correlation spectroscopy. The mean nanoparticle size was 548.2 nm with a zeta potential of -19.8 mV, indicating stability.
The document discusses small animal imaging techniques. It provides an overview of various imaging modalities including their resolutions and applications. Specific techniques covered include bioluminescence imaging, fluorescence imaging, computed tomography, magnetic resonance imaging, positron emission tomography, and single photon emission computed tomography. The document also discusses fluorescent probes and reagents used for small animal imaging including near-infrared dyes, quantum dots, fluorescent microspheres, and protease-activatable probes. Potential applications highlighted include tumor detection, vascular imaging, and monitoring of enzyme activity.
This document discusses microautoradiography, which is a technique used to visualize the distribution of radioactive substances in biological samples at a microscopic level. It involves incubating tissue with a radioactive ligand, then exposing photographic film or emulsion to the radioactivity emitted. This allows the localization of the radioactive material within subcellular structures. The technique provides high resolution and sensitivity. It has various applications in fields like cell biology, pharmacology, and molecular biology to study processes like cell division, drug targeting, and DNA/RNA localization.
Rita Schwieters conducted research on investigating the properties of gold nanoparticles (AuNPs) under the advisement of Dr. Chris Sorensen and grad student Jeff Powell. The research measured the enthalpy of dissolution for 5nm AuNPs ligated with dodecanethiol in a solution of dodecanethiol and toluene. Transition electron microscopy was used to determine the average particle diameter was 5.5nm with a 16% standard deviation. Analysis of the data collected at different temperatures allowed for the calculation of the enthalpy of dissolution and from that the interparticle potential and melting point, though adjustments are still needed to the model. Future work is needed to further understand the rejuven
This document discusses the use of gold nanoparticles for the treatment of cancer. It begins with an introduction to cancer and the side effects of traditional chemotherapy and radiation treatments. It then discusses how nanotechnology can be used to develop targeted drug delivery systems using gold nanoparticles. The document outlines the properties of gold nanoparticles that make them suitable for photothermal therapy applications for cancer treatment, including their ability to absorb light and generate heat. It also discusses the different types of gold nanoparticles, methods for synthesizing and characterizing them, and their potential applications and progress in cancer treatment.
NANOPARTICLES IN CANCER DIAGNOSIS AND TREATMENTKeshav Das Sahu
This document discusses the use of nanoparticles in cancer diagnosis and treatment. It introduces several types of nanoparticles that can be used, including nanoshells, dendrimers, quantum dots, superparamagnetic nanoparticles, nanowires, nanodiamonds, and nanosponges. Nanoshells and dendrimers are highlighted as promising for targeted drug delivery. The document also discusses magnetic resonance imaging contrast agents, including both paramagnetic gadolinium agents and superparamagnetic iron oxide nanoparticles, which can enhance MRI images and improve cancer diagnosis.
THE USE OF MICRO- AND MACRO-AUTORADIOGRAPHY TO STUDY THE TISSUE DISTRIBUTION ...QPS Holdings, LLC
Objectives:
To educate about the methods used to perform Quantitative Whole-Body Autoradiography (QWBA) and Micro-Autoradiography (MARG) to facilitate an understanding of the benefits and limitations of the techniques.
To present examples of how QWBA and MARG have been used to quantitatively and qualitatively evaluate drugs.
Potential application of nanoparticles in medicineBangaluru
Nanoparticle applications in management and control of serious diseases such as cancers are promising. Nanoparticles target
the drugs delivery system specifically to malignant cells. They are able to penetrate the stratum corneum barrier of the skin and thus have been used
widely as a treatment tool in skin cancer imaging, vaccine delivery via the skin, antimicrobials and wound healing. Recently, nanoparticles were used in
lung diseases through their ability to accumulation the drugs in the diseased lung areas by providing a local inhalation delivery of active components.
Lightoptical nanoscopy for the use in biomedical applications and material sciences, detection in attomolar concentrations
* Use of standard fluorophores like GFP, RFP, YFP, Alexa, Fluorescein (no photoswitch necessary)
2CLM Two Color Localisation microscopy in the nanoscale
* Optical resolution 10 nm in 2D, 40 nm in 3D
* Very fast in processing, complete picture (2000 images) with processing in 3 minutes
This document reviews the use of quantum dots for bioimaging applications. It discusses:
1) The synthesis of quantum dots, particularly CdSe/ZnS core/shell structures, and methods to tune their optical properties.
2) Modification of quantum dot surfaces with ligands to make them water soluble and biocompatible while maintaining fluorescence. Common surface modifications include adding carboxylic acids, silica shells, and encapsulation in micelles.
3) Applications of quantum dots in biology, including labeling of proteins and targeting of specific cell surface receptors due to their photostability and ability to detect multiple signals simultaneously.
This document describes how laser-induced breakdown spectroscopy (LIBS) was used to generate 3D elemental images of nanoparticle distribution in biological tissue at multiple scales. Sliced kidney tissue sections were mapped using LIBS to reconstruct the global nanoparticle distribution throughout the entire organ. Higher resolution LIBS imaging was also performed on specific regions of interest by repeatedly ablating the same tissue volume. This proof-of-concept study demonstrates that LIBS can quantitatively image both endogenous and exogenous elements in 3D within entire organs.
This document discusses various nanotechnology approaches for drug delivery, including nanoparticles for encapsulating and delivering drugs. It describes several types of nanoparticles - lipid-based, polymer-based, metallic, biological - that can be used for targeted drug delivery. It also highlights some achievements of nanotechnology in developing improved drug formulations, as well as challenges in the field and priority research areas like cancer nanotechnology.
Nanoparticles show promise for drug delivery applications in the pharmaceutical industry. They can increase drug solubility and bioavailability, target drug delivery, and potentially allow drugs to avoid generic competition through novel delivery methods. In particular, niosomes, nanocrystals, nanoclusters, micelles, and other nanoscale carriers are being investigated for controlled and targeted drug delivery using biocompatible polymers, lipids, and surfactants. These nanocarriers aim to improve drug therapies by more efficient transport and release of pharmaceutical compounds in the body.
Nanoparticle of plant extract: A Novel approach for cancer therapyroshan telrandhe
Presented in NATIONAL CONFERENCE ;A Phytomedicine : A Novel Approach For Cancer Treatment. Sponsered By Indian Councial Of Medical Research, Delhi. OrganisedBy KamlaNehru College Of Pharmacy, Butibori, Nagpur441108, Maharastra, India. ON 25 & 26 March 2017
Magnetic nanoparticles applications and bioavailability for cancer therapyPravin Chinchole
Magnetic nanoparticles can be used for cancer therapy applications. They can be coated or encapsulated to be bioavailable. When exposed to an external alternating magnetic field, the nanoparticles generate heat through hysteresis, friction, and relaxation effects. This localized hyperthermia can directly kill cancer cells or induce heat shock proteins to stimulate anti-cancer immunity. The nanoparticles can also be used for magnetic drug delivery, where drugs are attached and targeted to tumor sites using an external magnetic field, requiring lower doses than conventional treatment and reducing side effects. Studies have shown magnetic nanoparticle hyperthermia and drug delivery can significantly reduce tumor growth in animal models.
Use of nanotechnology in medical science (pros and cons)Vikram Kataria
here in this presentation I had shared the basic information regarding use of nanotechnology in medical science and what wonders and improvements that nano technology did in the field of medical science.
This document discusses the properties and medical applications of nanoparticles. It begins by defining nanoparticles and nanotechnology. It then discusses various methods for synthesizing nanoparticles and their unique properties at the nanoscale. The document outlines several medical applications of nanoparticles, including drug delivery, cancer treatment, surgery, and antibiotic resistance. It provides examples of how nanoparticles can be used for targeted drug delivery, photodynamic therapy, MRI contrast agents, and more. The conclusion reiterates that nanoparticles have increased surface area and novel properties that can benefit medical applications.
Quantum dots have unique spectral properties that make them useful fluorescent probes for cellular imaging. They can be made water-soluble and conjugated to biomolecules for targeting specific cells and structures. Quantum dots have advantages over traditional fluorescent probes like greater photostability and the ability to multiplex imaging. They have been used for in vitro and in vivo imaging applications like labeling cancer cells, visualizing capillaries and receptors, and observing subcellular structures in real-time. While useful imaging tools, quantum dots have limitations like potential toxicity that must be addressed for in vivo use.
Fluorescence recovery after photo bleachinganasshokor
FRAP (Fluorescence Recovery After Photobleaching) is a technique used to study the dynamics of molecules in living cells. It involves photobleaching a fluorescent marker in a region of the cell using a focused laser beam. The diffusion and movement of non-bleached fluorescent molecules into the bleached area is then monitored over time, allowing calculation of diffusion coefficients. Considerations in FRAP analysis include the degree of bleaching, bleach/recovery times, beam radius, and photobleaching artifacts. FRAP has various applications such as determining connectivity between cellular compartments using FLIP (Fluorescence Loss In Photobleaching) and quantifying transport between compartments.
The document discusses three fluorescence microscopy techniques: FRET, FRAP, and TIRF microscopy. It explains the principles, instrumentation, sample preparation, applications, and future aspects of each technique. FRET involves energy transfer between fluorophores and is used to study molecular interactions and structure. FRAP examines fluorophore diffusion by photobleaching a region and monitoring recovery. It provides information about molecular mobility. TIRF microscopy uses evanescent waves to selectively excite fluorophores very near a surface and is applied to studies of cellular processes at membranes. All three techniques provide insights into biological phenomena at the molecular level.
Analytical characterization of bone scaffold for tissue engineeringSUSHMITA DHIR
The document discusses using Fourier transform infrared (FTIR) spectroscopy to analyze the chemical structure and characteristic wave numbers of a bone scaffold composite material. FTIR spectra are performed on the scaffold to identify functional groups and interactions between the natural polymers and bioactive components that make up the scaffold. Literature references describe using FTIR to study membrane proteins, ligand adsorption on nanoparticles, and evaluate biodegradable scaffolds for tissue engineering applications. FTIR is shown to provide a nondestructive means of analyzing secondary structure, interactions, and material changes in biomaterials.
This study investigated macromolecular variability in populations of the alga Scenedesmus quadricauda grown under phosphorus-replete or phosphorus-starved conditions using Fourier transform infrared spectroscopy. Infrared spectra were obtained from individual algal coenobia, which were large enough at 35 μm in diameter for high quality spectra. The P-starved coenobia on average had higher carbohydrate and lower protein content compared to P-replete coenobia. There was variability between individual coenobia, with distributions of absorbance ratios between protein and carbohydrate bands being non-overlapping between the nutrient conditions. Multivariate models using spectral data could accurately predict the nutrient status of independent coenobia based on their infrared
1) The study mapped biochemical changes in living algal cells using infrared microspectroscopy at a synchrotron light source.
2) Spectra from living algal cells maintained the flow-through cell were high quality and similar to dried cells, showing bands corresponding to proteins, lipids, carbohydrates and phosphorylated molecules.
3) Spectral maps of nutrient-replete cells showed band intensities consistent with known locations of the nucleus and chloroplasts. Bands due to lipids were lowest in the nucleus region and highest in chloroplast regions, while protein bands showed the opposite pattern.
NIR in Leaf Chlorophyll Concentration EstimationIRJET Journal
This document discusses using field imaging spectroscopy and random forests to estimate leaf chlorophyll concentration in soybeans. A field imaging spectrometer system was used to collect hyperspectral reflectance data from soybean leaves. The PROSPECT radiative transfer model was used to relate the spectral data to chlorophyll content. Random forests were then used to develop a model for estimating chlorophyll content based on the spectral data. The model was able to accurately retrieve chlorophyll content from validation spectral data, demonstrating the potential of this approach for remote monitoring of crop health conditions. Future work involves applying this method from field to satellite data to allow monitoring soybean health over large areas.
Phototoxicity in live cell imaging workshop CYTO2018Jaroslav Icha
Presentation that served as a background for our discussion at a workshop at CYTO2018, the 33rd Congress of the International Society for Advancement of Cytometry in Prague May 1st
A seminar report on the chemical frontiers of living matter seminar series - ...Glen Carter
This seminar report highlights a select few presentations of cutting-edge research being done in various labs across the Paris Science et Lettre (PSL) network.
MPEF (multiphoton excitation fluorescence) microscopy uses ultrafast lasers to enable deep tissue imaging of living samples with little damage. It is widely used in neuroscience and cancer research. While primarily a research tool, MPEF microscopy has potential for clinical applications through developments like multiphoton endoscopy. Key benefits of MPEF include deeper imaging into tissues, low photodamage, and inherent 3D resolution without the need for a confocal pinhole. The technology continues to advance through increased laser powers, new fluorescent probes, and application-specific devices.
What is the Surface characterization techniques of Fourier-transform.pdfarishmarketing21
What is the Surface characterization techniques of Fourier-transform infrared spectroscopy
(FTIR) and Optical Imaging and Spectroscopy (microscopy, TIRF)
explain what are they measuring, their uniqueness, working principle briefly
Solution
Fourier transform infrared spectroscopy (FTIR) is a powerful analysis tool for characterizing and
identifying organic molecules. It is the spectroscopic technique that is the most widely used for
determining the characteristics of new membranes. In attenuated total reflectance mode, this type
of spectroscopy enables functional groups present over a depth of about 1 m to be identified.
During ATR analysis, the sample is kept in contact with a crystal allowing total internal
reflection. An infrared ray arrives at the crystal where the material under study has been placed.
The internal reflection of the ray in the crystal gives rise to an evanescent wave which, at each
reflection, continues beyond the surface of the crystal and penetrates the sample over about 1 m.
The penetration depth depends on the wavelength, the angle of incidence of the beam on the
crystal, and the nature of the crystal.
Spectra are thus obtained (curves of absorbance vs. wavelength) that have absorption peaks
characteristic of the functions present at the membrane surface.
FTIR-ATR is a sensitive, nondestructive method that can be used qualitatively and
quantitatively. However, it requires prior drying of the membrane sample.
One of the applications of FTIR-ATR is the characterization of modified surfaces. In this case,
the spectra show bands characteristic of the basic membrane with, in most cases, bands
characteristic of the new functional groups related to the modification. FTIR-ATR also enables
the efficiency of membrane cleaning to be assessed .
This method can also be used to analyze the adsorption of macromolecules at the membrane
surface and to check whether the conformation of the adsorbed compounds (e.g., proteins) has
been modified by comparing the spectra of the adsorbed product with those of the same product
in solution . When the deposits are very small, however, it is difficult to determine the presence
of fouling agents; this necessitates the use of elaborate data-processing methods that eliminate
the contributions of the membrane and water from the raw spectra.
UNIQUENESS:
There are three principal advantages for an FT spectrometer compared to a scanning (dispersive)
spectrometer.
TIRF
Total internal reflection fluorescence (TIRF) microscopy (TIRFM) is an elegant optical
technique that provides for the excitation of fluorophores in an extremely thin axial region
(‘optical section’). The method is based on the principle that when excitation light is totally
internally reflected in a transparent solid (e.g., coverglass) at its interface with liquid an
electromagnetic field, called the evanescent wave, is generated in the liquid at the solid-liquid
interface and is the same frequency as the excitation light. Since the inte.
Rapid Prediction of Extractives and Polyphenolic Contents in Pinus caribaea B...Waqas Tariq
The potential of near infrared reflectance spectroscopy (NIRS) for rapidly and accurately determining the extractives and polyphenol contents in Pinus caribaea bark extracts was assessed. Pinus caribaea bark samples were obtained from 110 trees in plantation stands at different locations of Ghana and were then scanned by NIRS. Their extractives and polyphenol contents reference values were obtained by TAPPI T204 om-88 and Folin-Ciocalteu methods respectively. These reference values were regressed against different spectral transformations using partial least square (PLS) regression. First derivative transformation equation of the raw spectral data, resulted in a coefficient of determination r2 in the external validation of 0.91 and 0.97 respectively for extractives content and polyphenol content. The calibration samples covered a wide range of extractives content from 34 – 45% and polyphenolic content from 16 – 23.5%. The standard deviation to root mean square error of cross validation ratio (SD/RMSECV), root mean square error of calibration to standard deviation ratio (RMSEC/SD), RMSECV/RMSEC and r2 for both extractives and polyphenol models were indicative of good prediction equations. The predicted values were thus highly correlated with time-consuming wet chemical measured values of extractives content and polyphenol content. The use of NIRS for the determination of the extractives and polyphenol contents in Pinus caribaea bark thus provides an advantage of time saving and cost of analysis.
This document describes a study that synthesized Fe3AlO6 nanoparticles using a soft chemical approach and characterized their structure and properties. It then assessed the cytotoxicity of the nanoparticles in human neural stem cells (hNSCs) through several assays. Specifically, Fe3AlO6 nanoparticles were synthesized via hydrolysis of a single-source molecular precursor under controlled conditions. X-ray diffraction and transmission electron microscopy confirmed the formation of monophasic nanocrystalline particles around 16.5 nm in size. Cytotoxicity assays including MTT, LDH and FDA were performed on hNSCs treated with varying concentrations of the nanoparticles. Scanning electron microscopy was also used to examine changes in cell morphology and nanoparticle distribution within
A Practical Guide For Academic Proposal WritingAmy Cernava
This document provides a detailed research proposal for a PhD project on using wavelet analysis to improve the accuracy of chlorophyll quantification in oil palm leaves through hyperspectral remote sensing. It includes background information on the significance of chlorophyll concentrations, an overview of the proposed methodology using wavelet transforms on reflectance spectra, research questions, and a Gantt chart outlining key milestones and a 126-week timeline. The goal is to develop a technique to generate accurate predictions of chlorophyll concentration and nitrogen content despite variations in other factors that influence leaf reflectance.
This document summarizes biomaterials that can be used for photonics applications. It discusses bioderived materials like bacteriorhodopsin and green fluorescent protein, which have optical properties useful for applications like holographic memory and photosensitization. DNA is also presented as a photonic material. Bioinspired materials designed based on principles from biological light harvesting systems, like dendrimers modeled after chlorophyll antenna arrays, are covered. The talk provides an overview of different types of biomaterials and examples of each along with their potential photonic applications.
Structural Analysis Of Alfa Fibers After Chemical TreatmentIJERA Editor
Nowadays, natural fibers are used as reinforcement in composite materials. The Alfa fibers have undergone an alkaline treatment with sodium hydroxide NaOH at a concentration of 10%, during an immersion period of two days. After drying, the Fourier transform infrared spectroscopy by attenuated total reflection (FTIR-ATR) and X-ray diffraction (XRD) were used for the analysis of the chemical properties of these fibers which were extracted from the plant Alfa of the region Al Haouz (Morocco) in order to study the modifications resulting from the alkaline treatment. The results proved the presence of the cellulose, with an increase in its proportion in those fibers which have undergone an alkaline treatment with NaOH, the presence of lignin and pectin, as well as their disappearance after the alkaline extraction.
An Investigation Of The RWPE Prostate Derived Family Of Cell Lines Using FTIR...Jackie Taylor
This study used Fourier transform infrared (FTIR) spectroscopy to investigate a family of prostate cell lines (RWPE-1, RWPE-2, WPE1-NA22, WPE1-NB14, WPE1-NB11, WPE1-NB26) derived from the same source but differing in their mode of transformation and invasive phenotype. Synchrotron and laboratory FTIR microspectroscopy, as well as broadbeam spectroscopy, were able to discriminate between the cell lines based on their transformation method rather than invasiveness. Additionally, a genetic algorithm was tested as a potential standardization of preprocessing for clinical FTIR spectroscopy applications.
Baishakhi Mazumder is an Indian citizen currently pursuing a PhD in physics at the University of Rouen in France. Her thesis focuses on understanding the physics of field evaporation of poor conducting materials using laser assisted atom probe tomography. She has over 7 years of experience in materials characterization and nanoscience research. Her work involves characterization techniques including atom probe tomography, scanning electron microscopy, transmission electron microscopy and atomic force microscopy.
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
The Microsoft 365 Migration Tutorial For Beginner.pptxoperationspcvita
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
What is an RPA CoE? Session 1 – CoE VisionDianaGray10
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...Alex Pruden
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!