Two Port Networks
•
2 likes•1,818 views
Characteristics of LTI Two port networks, Z-parameter and its Equivalent circuit, Y parameter and its equivalent circuit, Transmission parameter, Inverse Transmission , h-parameter and its equivalent circuit, g-parameter and its equivalent circuit, Condition of reciprocity, Condition of Symmetry.
Report
Share
Report
Share
Download to read offline
Recommended
Digital signal processing computer based approach - sanjit k. mitra (2nd ed)
This document describes a new type of battery that is safer and longer lasting than current lithium-ion batteries. It works by using sodium ions rather than lithium ions and two different metals as the electrodes. Sodium ions are able to flow back and forth between the electrodes through an electrolyte during charging and discharging. This new battery design is expected to be cheaper to produce and less flammable than conventional lithium-ion batteries.
Two Port Network Parameters
This document discusses various parameters used to characterize two-port networks, including Z, Y, S, and ABCD parameters. It explains that Z parameters relate voltages and currents using an impedance matrix, while Y parameters use an admittance matrix. S parameters describe the scattering of waves at the ports in terms of reflection and transmission coefficients. The ABCD matrix relates voltages and currents at the ports and allows for easy cascading of networks. Measurements are typically made using a vector network analyzer to determine the S-parameter scattering matrix.
Oscillators
An electronic oscillator is an electronic circuit that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators convert direct current (DC) from a power supply to an alternating current (AC) signal. They are widely used in many electronic devices. Common examples of signals generated by oscillators include signals broadcast by radio and television transmitters, clock signals that regulate computers and quartz clocks, and the sounds produced by electronic beepers and video games.
Oscillators designed to produce a high-power AC output from a DC supply are usually called inverters.
There are two main types of electronic oscillator: the linear or harmonic oscillator and the nonlinear or relaxation oscillator.
Rectangular waveguides
1) Rectangular waveguides can transmit electromagnetic waves above a certain cutoff frequency, acting as a high-pass filter. They support transverse electric (TE) and transverse magnetic (TM) modes of propagation.
2) For TM modes, the electric field is transverse to the direction of propagation, while the magnetic field has a longitudinal component. The modes are denoted TMmn, with m and n indicating the number of half-wavelength variations across the width and height.
3) For TE modes, the magnetic field is entirely transverse, while the electric field has a longitudinal component. These modes are denoted TEmn, with m and n having the same meaning as in the TM case.
Generation of AM-DSB-SC using Balanced FET Modulator.pptx
This document discusses amplitude modulation using a balanced FET modulator. It begins by providing the mathematical representation of an AM-DSB-SC waveform. It then describes how a balanced FET modulator can be used to generate an AM-DSB-SC signal. Specifically, it explains that a balanced FET modulator uses two matched FETs in a differential amplifier configuration. The carrier signal is applied in phase to the gates, while the message signal is applied out of phase. This results in an output signal that is amplitude modulated by the message signal. The document concludes by noting that while a balanced FET modulator can heavily suppress the carrier, it cannot achieve 100% carrier suppression due to imperfect matching of the F
Analog Electronic Circuits - Module 2.2
This document discusses different biasing configurations for field-effect transistors (FETs) including fixed bias, self bias, and voltage divider bias. It provides the key relationships for analyzing each configuration graphically or mathematically. Fixed bias uses two supplies with the gate-source voltage (VGS) fixed. Self bias uses a single supply with VGS determined by the drain current and source resistor. Voltage divider bias also uses a single supply but VGS is defined by the voltage divider and drain current. The document also covers a common-gate configuration and derives the small signal model for a JFET.
Source coding systems
The document discusses digital communication systems and their advantages over analog communication. It describes how analog signals are digitized using sampling and quantization. Sampling must occur at least twice the maximum frequency of the signal to avoid aliasing, as stated by the Nyquist sampling theorem. Quantization converts continuous amplitudes to discrete levels, causing quantization error and noise. Digital communication provides benefits like lower distortion and easier signal processing. Companding is discussed as a technique used in pulse code modulation to improve signal-to-noise ratio by compressing higher amplitudes before transmission.
Recommended
Digital signal processing computer based approach - sanjit k. mitra (2nd ed)
This document describes a new type of battery that is safer and longer lasting than current lithium-ion batteries. It works by using sodium ions rather than lithium ions and two different metals as the electrodes. Sodium ions are able to flow back and forth between the electrodes through an electrolyte during charging and discharging. This new battery design is expected to be cheaper to produce and less flammable than conventional lithium-ion batteries.
Two Port Network Parameters
This document discusses various parameters used to characterize two-port networks, including Z, Y, S, and ABCD parameters. It explains that Z parameters relate voltages and currents using an impedance matrix, while Y parameters use an admittance matrix. S parameters describe the scattering of waves at the ports in terms of reflection and transmission coefficients. The ABCD matrix relates voltages and currents at the ports and allows for easy cascading of networks. Measurements are typically made using a vector network analyzer to determine the S-parameter scattering matrix.
Oscillators
An electronic oscillator is an electronic circuit that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators convert direct current (DC) from a power supply to an alternating current (AC) signal. They are widely used in many electronic devices. Common examples of signals generated by oscillators include signals broadcast by radio and television transmitters, clock signals that regulate computers and quartz clocks, and the sounds produced by electronic beepers and video games.
Oscillators designed to produce a high-power AC output from a DC supply are usually called inverters.
There are two main types of electronic oscillator: the linear or harmonic oscillator and the nonlinear or relaxation oscillator.
Rectangular waveguides
1) Rectangular waveguides can transmit electromagnetic waves above a certain cutoff frequency, acting as a high-pass filter. They support transverse electric (TE) and transverse magnetic (TM) modes of propagation.
2) For TM modes, the electric field is transverse to the direction of propagation, while the magnetic field has a longitudinal component. The modes are denoted TMmn, with m and n indicating the number of half-wavelength variations across the width and height.
3) For TE modes, the magnetic field is entirely transverse, while the electric field has a longitudinal component. These modes are denoted TEmn, with m and n having the same meaning as in the TM case.
Generation of AM-DSB-SC using Balanced FET Modulator.pptx
This document discusses amplitude modulation using a balanced FET modulator. It begins by providing the mathematical representation of an AM-DSB-SC waveform. It then describes how a balanced FET modulator can be used to generate an AM-DSB-SC signal. Specifically, it explains that a balanced FET modulator uses two matched FETs in a differential amplifier configuration. The carrier signal is applied in phase to the gates, while the message signal is applied out of phase. This results in an output signal that is amplitude modulated by the message signal. The document concludes by noting that while a balanced FET modulator can heavily suppress the carrier, it cannot achieve 100% carrier suppression due to imperfect matching of the F
Analog Electronic Circuits - Module 2.2
This document discusses different biasing configurations for field-effect transistors (FETs) including fixed bias, self bias, and voltage divider bias. It provides the key relationships for analyzing each configuration graphically or mathematically. Fixed bias uses two supplies with the gate-source voltage (VGS) fixed. Self bias uses a single supply with VGS determined by the drain current and source resistor. Voltage divider bias also uses a single supply but VGS is defined by the voltage divider and drain current. The document also covers a common-gate configuration and derives the small signal model for a JFET.
Source coding systems
The document discusses digital communication systems and their advantages over analog communication. It describes how analog signals are digitized using sampling and quantization. Sampling must occur at least twice the maximum frequency of the signal to avoid aliasing, as stated by the Nyquist sampling theorem. Quantization converts continuous amplitudes to discrete levels, causing quantization error and noise. Digital communication provides benefits like lower distortion and easier signal processing. Companding is discussed as a technique used in pulse code modulation to improve signal-to-noise ratio by compressing higher amplitudes before transmission.
Multistage amplifier
1. A multistage amplifier achieves greater voltage and power gain by using multiple amplification stages connected in cascade. The overall voltage gain is equal to the product of the individual stage gains.
2. Gain is often expressed in decibels (dB) which allows both small and large quantities to be conveniently represented on a logarithmic scale corresponding to human perception. The overall multistage amplifier gain in dB is the sum of the individual stage gains in dB.
3. Common types of coupling between stages include RC coupling using capacitors, direct coupling without coupling elements, and transformer coupling. RC coupling is inexpensive but limits low frequency response while direct coupling can amplify low frequencies without coupling elements.
Delta Modulation
Delta modulation is an analog-to-digital conversion technique used to transfer data. It works by comparing an input signal to a reference signal and encoding the difference into a digital bitstream. A delta modulation system consists of a modulator that converts an analog signal to digital, and a demodulator that converts the digital signal back to analog. Delta modulation is simpler than pulse code modulation but can achieve high signal-to-noise ratios and variable bandwidth. However, it is limited by slope overload when signals change rapidly.
Sampling theorem
The document discusses sampling theory and analog-to-digital conversion. It begins by explaining that most real-world signals are analog but must be converted to digital for processing. There are three steps: sampling, quantization, and coding. Sampling converts a continuous-time signal to a discrete-time signal by taking samples at regular intervals. The sampling theorem states that the sampling frequency must be at least twice the highest frequency of the sampled signal to avoid aliasing. Finally, it provides an example showing how to calculate the minimum sampling rate, or Nyquist rate, given the highest frequency of a signal.
Field Effect Transistor (FET) and it's Types
Field Effect Transistor (FET) and it's TypesMehran University Of Engineering and Technology, Pakistan
This document discusses different types of field effect transistors (FETs). It describes the junction field effect transistor (JFET) and its construction, advantages, and applications. The metal-oxide-semiconductor field effect transistor (MOSFET) is also discussed, including its construction, depletion and enhancement modes of operation, working principle, and applications such as switching and signal amplification. The document also briefly mentions other semiconductor devices like zener diodes, varactor diodes, and their applications.operational amplifiers
1. Operational amplifiers are widely used electronic components that can perform mathematical operations such as amplification, integration, differentiation, and summation.
2. An ideal op-amp has infinite input impedance, infinite gain, zero output impedance, and can operate at infinite bandwidth.
3. Op-amps are used in various circuit configurations including inverting amplifiers, non-inverting amplifiers, summing amplifiers, voltage followers, and filters.
Introduction to Thevenin's theorem
Explaining about one of the popular theorems in electrical engineering, Thevenin's theorem. it gives direct idea about the theorem and its different cases of applicability. Some of easy tricks and facts are also included for convenience.
01.MULTI STAGE AMPLIFIER (L 1).ppt
The document describes a multistage amplifier configuration where the output of one amplifier stage is connected to the input of the next stage to achieve an overall higher gain. It provides an example of a two-stage cascaded BJT amplifier, showing the individual gains of each stage and how to calculate the overall voltage gain. It also includes diagrams of the amplifier circuit and formulas for input and output impedance.
Negative feedback Amplifiers
This presentation contains the basics of feedback, types of feedback connection & properties of the negative feedback amplifier. Numericals based on the properties are solved & given for practice.
Wideband Frequency Modulation.pdf
Wideband frequency modulation (WBFM) is a technique where the modulation index is greater than 1, resulting in a wider signal bandwidth. WBFM is used when spectral efficiency is less important and a large spectral spread is desired, such as in entertainment broadcasting, audio communication, and military applications. The mathematical analysis of WBFM shows that its spectrum consists of a carrier signal along with upper and lower sidebands determined by Bessel functions. Its total power is distributed among these components, with greater power in lower order sidebands. WBFM provides better signal quality than narrowband FM but uses more spectrum.
Stability problems
This document discusses stability problems in negative feedback amplifiers. It explains that amplifiers can become unstable if the phase shift exceeds 180 degrees at high frequencies, causing positive feedback. The Nyquist criterion and pole locations are introduced as ways to test stability. Gain and phase margins are also defined. Feedback is shown to shift poles left, improving stability for single and double pole amplifiers, but amplifiers with more poles could become unstable if phase shift exceeds 180 degrees.
Frequency modulation and its application
This document discusses frequency modulation (FM) including its definition, modulation index, spectrum characteristics, types of FM modulation, generation of FM using phase modulation, advantages and disadvantages compared to other modulation techniques, and applications of FM such as in radio broadcasting, television sound, and satellite television. FM provides noise immunity and allows adjusting the noise level by changing the frequency deviation. It is widely used for radio but requires more complex transmission and reception equipment than other modulation methods.
unit4 DTFT .pptx
The document discusses the Discrete Time Fourier Transform (DTFT). It defines the DTFT as the transformation of a discrete time sequence x(n) into its frequency representation X(ω). The DTFT of x(n) is defined as the integral of x(n) multiplied by e-jwn from -∞ to ∞. For the inverse DTFT, x(n) can be obtained from X(ω) by taking the integral of X(ω) multiplied by ejwndω from -π to π. For a discrete time signal to have a DTFT, the sequence must be absolutely summable, meaning the summation of x(n) from -∞ to ∞ must be finite
Multivibrator
The document discusses different types of multivibrator circuits. It begins with introducing Shahid uz Jaman Shah and Samiul Isam, their names, rolls, and departments. It then provides definitions and circuit diagrams of astable, monostable, and bistable multivibrators. For each type, it explains the circuit operation and characteristics, provides applications, and discusses frequency of oscillation for astable multivibrators. Overall, the document presents information on three main types of multivibrator circuits: astable, monostable, and bistable.
Digital Signal Processing Tutorial: Chapt 4 design of digital filters (FIR)
This document discusses digital filters and the design of finite impulse response (FIR) filters. It covers topics such as the design of FIR filters using windows, properties of FIR filters including their linear phase characteristics, and comparisons between FIR and infinite impulse response (IIR) filters. MATLAB code is provided to demonstrate the effects of linear phase characteristics on filtered signals. Linear phase filters are shown to preserve signal shape while non-linear phase filters can distort signals.
Shift Registers
Shift registers are digital circuits composed of flip-flops that can shift data from one stage to the next. They can be configured for serial-in serial-out, serial-in parallel-out, parallel-in serial-out, or parallel-in parallel-out data movement. Common applications include converting between serial and parallel data, temporary data storage, and implementing counters. MSI shift registers like the 74LS164 and 74LS166 provide 8-bit shift register functionality.
Components of a satellite communication system transponder
The document discusses the key subsystems of a communication satellite. It describes the transponder as the interconnected units that form a communication channel between the satellite's receiving and transmitting antennas. The main subsystems include the communication payload containing transponders, antennas, and switching systems; engines to reach the desired orbit; station keeping, tracking, and stabilization to maintain the correct orbit and antenna positioning; and a power subsystem using solar cells and batteries. The document then focuses on the structure and function of a transponder, including its input band-limiting filter, low-noise amplifier, frequency translator using an oscillator and mixer, output filter, and power amplifier.
Simple regenerative receiver
This document provides instructions for building a simple regenerative radio receiver with a single FET and low component count. The receiver can tune from 3.4 MHz to 8.5 MHz and uses a variable capacitor, coil, resistors, capacitors, FET, battery and regeneration control to receive AM radio broadcasts and SSB transmissions. Testing involves connecting an antenna, ground and audio output, tuning the variable capacitor while adjusting the regeneration control to achieve maximum sensitivity and selectivity at different frequencies across the band.
Network analysis and synthesis question and answer...
The document discusses the results of a study on the impact of climate change on coffee production. Researchers found that suitable land for coffee production could decline by up to 50% by 2050 due to rising temperatures and changing rain patterns associated with climate change. The study concludes that climate change poses a major threat to the coffee industry worldwide as suitable land decreases substantially in the coming decades if greenhouse gas emissions are not reduced.
Field Effect Transistor ppt
The three terminals of the FET are known as Gate, Drain, and Source.
It is a voltage controlled device, where the input voltage controls by the output current.
In FET current used to flow between the drain and the source terminal. And this current can be controlled by applying the voltage between the gate and the source terminal.
So this applied voltage generate the electric field within the device and by controlling these electric field we can control the flow of current through the device.
Sample and hold circuit
Sample-and-hold (S/H) circuits are important analog building blocks that are used in applications like analog-to-digital converters and switched-capacitor filters. The simplest S/H circuit uses an MOS transistor as a sampling switch and a hold capacitor. Switched op-amp based S/H circuits reduce errors from charge injection and clock feedthrough. S/H circuits are used to hold input signals constant for comparisons in circuits like successive approximation ADCs and to simultaneously sample multiple signals.
Synthesis network
This document provides an overview of circuit synthesis. It discusses:
1) The differences between circuit analysis and synthesis, noting that synthesis problems do not always have solutions and solutions are not always unique.
2) The available elements for synthesis include passive circuits using resistors, capacitors, and inductors, active circuits using operational amplifiers, and digital filters.
3) Methods for synthesizing passive one-port and two-port circuits, including realizing driving point impedances and designing transfer functions like filters. Approximations are often needed due to ideal responses being non-realizable.
4) Additional details are provided on specific synthesis examples and techniques.
Network Functions
The document is a scanned copy of a contract for the sale of a residential property located in California. The contract details the purchase price of $625,000, down payment of $125,000, with the remainder of the purchase price due at closing within 30 days of acceptance. The contract is contingent upon the buyer obtaining financing.
More Related Content
What's hot
Multistage amplifier
1. A multistage amplifier achieves greater voltage and power gain by using multiple amplification stages connected in cascade. The overall voltage gain is equal to the product of the individual stage gains.
2. Gain is often expressed in decibels (dB) which allows both small and large quantities to be conveniently represented on a logarithmic scale corresponding to human perception. The overall multistage amplifier gain in dB is the sum of the individual stage gains in dB.
3. Common types of coupling between stages include RC coupling using capacitors, direct coupling without coupling elements, and transformer coupling. RC coupling is inexpensive but limits low frequency response while direct coupling can amplify low frequencies without coupling elements.
Delta Modulation
Delta modulation is an analog-to-digital conversion technique used to transfer data. It works by comparing an input signal to a reference signal and encoding the difference into a digital bitstream. A delta modulation system consists of a modulator that converts an analog signal to digital, and a demodulator that converts the digital signal back to analog. Delta modulation is simpler than pulse code modulation but can achieve high signal-to-noise ratios and variable bandwidth. However, it is limited by slope overload when signals change rapidly.
Sampling theorem
The document discusses sampling theory and analog-to-digital conversion. It begins by explaining that most real-world signals are analog but must be converted to digital for processing. There are three steps: sampling, quantization, and coding. Sampling converts a continuous-time signal to a discrete-time signal by taking samples at regular intervals. The sampling theorem states that the sampling frequency must be at least twice the highest frequency of the sampled signal to avoid aliasing. Finally, it provides an example showing how to calculate the minimum sampling rate, or Nyquist rate, given the highest frequency of a signal.
Field Effect Transistor (FET) and it's Types
Field Effect Transistor (FET) and it's TypesMehran University Of Engineering and Technology, Pakistan
This document discusses different types of field effect transistors (FETs). It describes the junction field effect transistor (JFET) and its construction, advantages, and applications. The metal-oxide-semiconductor field effect transistor (MOSFET) is also discussed, including its construction, depletion and enhancement modes of operation, working principle, and applications such as switching and signal amplification. The document also briefly mentions other semiconductor devices like zener diodes, varactor diodes, and their applications.operational amplifiers
1. Operational amplifiers are widely used electronic components that can perform mathematical operations such as amplification, integration, differentiation, and summation.
2. An ideal op-amp has infinite input impedance, infinite gain, zero output impedance, and can operate at infinite bandwidth.
3. Op-amps are used in various circuit configurations including inverting amplifiers, non-inverting amplifiers, summing amplifiers, voltage followers, and filters.
Introduction to Thevenin's theorem
Explaining about one of the popular theorems in electrical engineering, Thevenin's theorem. it gives direct idea about the theorem and its different cases of applicability. Some of easy tricks and facts are also included for convenience.
01.MULTI STAGE AMPLIFIER (L 1).ppt
The document describes a multistage amplifier configuration where the output of one amplifier stage is connected to the input of the next stage to achieve an overall higher gain. It provides an example of a two-stage cascaded BJT amplifier, showing the individual gains of each stage and how to calculate the overall voltage gain. It also includes diagrams of the amplifier circuit and formulas for input and output impedance.
Negative feedback Amplifiers
This presentation contains the basics of feedback, types of feedback connection & properties of the negative feedback amplifier. Numericals based on the properties are solved & given for practice.
Wideband Frequency Modulation.pdf
Wideband frequency modulation (WBFM) is a technique where the modulation index is greater than 1, resulting in a wider signal bandwidth. WBFM is used when spectral efficiency is less important and a large spectral spread is desired, such as in entertainment broadcasting, audio communication, and military applications. The mathematical analysis of WBFM shows that its spectrum consists of a carrier signal along with upper and lower sidebands determined by Bessel functions. Its total power is distributed among these components, with greater power in lower order sidebands. WBFM provides better signal quality than narrowband FM but uses more spectrum.
Stability problems
This document discusses stability problems in negative feedback amplifiers. It explains that amplifiers can become unstable if the phase shift exceeds 180 degrees at high frequencies, causing positive feedback. The Nyquist criterion and pole locations are introduced as ways to test stability. Gain and phase margins are also defined. Feedback is shown to shift poles left, improving stability for single and double pole amplifiers, but amplifiers with more poles could become unstable if phase shift exceeds 180 degrees.
Frequency modulation and its application
This document discusses frequency modulation (FM) including its definition, modulation index, spectrum characteristics, types of FM modulation, generation of FM using phase modulation, advantages and disadvantages compared to other modulation techniques, and applications of FM such as in radio broadcasting, television sound, and satellite television. FM provides noise immunity and allows adjusting the noise level by changing the frequency deviation. It is widely used for radio but requires more complex transmission and reception equipment than other modulation methods.
unit4 DTFT .pptx
The document discusses the Discrete Time Fourier Transform (DTFT). It defines the DTFT as the transformation of a discrete time sequence x(n) into its frequency representation X(ω). The DTFT of x(n) is defined as the integral of x(n) multiplied by e-jwn from -∞ to ∞. For the inverse DTFT, x(n) can be obtained from X(ω) by taking the integral of X(ω) multiplied by ejwndω from -π to π. For a discrete time signal to have a DTFT, the sequence must be absolutely summable, meaning the summation of x(n) from -∞ to ∞ must be finite
Multivibrator
The document discusses different types of multivibrator circuits. It begins with introducing Shahid uz Jaman Shah and Samiul Isam, their names, rolls, and departments. It then provides definitions and circuit diagrams of astable, monostable, and bistable multivibrators. For each type, it explains the circuit operation and characteristics, provides applications, and discusses frequency of oscillation for astable multivibrators. Overall, the document presents information on three main types of multivibrator circuits: astable, monostable, and bistable.
Digital Signal Processing Tutorial: Chapt 4 design of digital filters (FIR)
This document discusses digital filters and the design of finite impulse response (FIR) filters. It covers topics such as the design of FIR filters using windows, properties of FIR filters including their linear phase characteristics, and comparisons between FIR and infinite impulse response (IIR) filters. MATLAB code is provided to demonstrate the effects of linear phase characteristics on filtered signals. Linear phase filters are shown to preserve signal shape while non-linear phase filters can distort signals.
Shift Registers
Shift registers are digital circuits composed of flip-flops that can shift data from one stage to the next. They can be configured for serial-in serial-out, serial-in parallel-out, parallel-in serial-out, or parallel-in parallel-out data movement. Common applications include converting between serial and parallel data, temporary data storage, and implementing counters. MSI shift registers like the 74LS164 and 74LS166 provide 8-bit shift register functionality.
Components of a satellite communication system transponder
The document discusses the key subsystems of a communication satellite. It describes the transponder as the interconnected units that form a communication channel between the satellite's receiving and transmitting antennas. The main subsystems include the communication payload containing transponders, antennas, and switching systems; engines to reach the desired orbit; station keeping, tracking, and stabilization to maintain the correct orbit and antenna positioning; and a power subsystem using solar cells and batteries. The document then focuses on the structure and function of a transponder, including its input band-limiting filter, low-noise amplifier, frequency translator using an oscillator and mixer, output filter, and power amplifier.
Simple regenerative receiver
This document provides instructions for building a simple regenerative radio receiver with a single FET and low component count. The receiver can tune from 3.4 MHz to 8.5 MHz and uses a variable capacitor, coil, resistors, capacitors, FET, battery and regeneration control to receive AM radio broadcasts and SSB transmissions. Testing involves connecting an antenna, ground and audio output, tuning the variable capacitor while adjusting the regeneration control to achieve maximum sensitivity and selectivity at different frequencies across the band.
Network analysis and synthesis question and answer...
The document discusses the results of a study on the impact of climate change on coffee production. Researchers found that suitable land for coffee production could decline by up to 50% by 2050 due to rising temperatures and changing rain patterns associated with climate change. The study concludes that climate change poses a major threat to the coffee industry worldwide as suitable land decreases substantially in the coming decades if greenhouse gas emissions are not reduced.
Field Effect Transistor ppt
The three terminals of the FET are known as Gate, Drain, and Source.
It is a voltage controlled device, where the input voltage controls by the output current.
In FET current used to flow between the drain and the source terminal. And this current can be controlled by applying the voltage between the gate and the source terminal.
So this applied voltage generate the electric field within the device and by controlling these electric field we can control the flow of current through the device.
Sample and hold circuit
Sample-and-hold (S/H) circuits are important analog building blocks that are used in applications like analog-to-digital converters and switched-capacitor filters. The simplest S/H circuit uses an MOS transistor as a sampling switch and a hold capacitor. Switched op-amp based S/H circuits reduce errors from charge injection and clock feedthrough. S/H circuits are used to hold input signals constant for comparisons in circuits like successive approximation ADCs and to simultaneously sample multiple signals.
What's hot (20)
Digital Signal Processing Tutorial: Chapt 4 design of digital filters (FIR)
Digital Signal Processing Tutorial: Chapt 4 design of digital filters (FIR)
Components of a satellite communication system transponder
Components of a satellite communication system transponder
Network analysis and synthesis question and answer...
Network analysis and synthesis question and answer...
Viewers also liked
Synthesis network
This document provides an overview of circuit synthesis. It discusses:
1) The differences between circuit analysis and synthesis, noting that synthesis problems do not always have solutions and solutions are not always unique.
2) The available elements for synthesis include passive circuits using resistors, capacitors, and inductors, active circuits using operational amplifiers, and digital filters.
3) Methods for synthesizing passive one-port and two-port circuits, including realizing driving point impedances and designing transfer functions like filters. Approximations are often needed due to ideal responses being non-realizable.
4) Additional details are provided on specific synthesis examples and techniques.
Network Functions
The document is a scanned copy of a contract for the sale of a residential property located in California. The contract details the purchase price of $625,000, down payment of $125,000, with the remainder of the purchase price due at closing within 30 days of acceptance. The contract is contingent upon the buyer obtaining financing.
Two Port Networks
B.Tech, Electrical and Electronics Engineering, Second Year Lecturer Notes on Network Analysis and Synthesis By Amarjeet Singh Jamwal.
Two port network
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Introduction to Signal and Systems
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the property located at 123 Main St. The agreement is for a 12-month term beginning January 1st, 2023, and outlines the monthly rent amount, late fees, security deposit details, rules regarding guests and pets, and responsibilities of landlord and tenant for repairs and maintenance. It notes that the agreement will automatically renew for another 12-month term unless either party provides written notice of termination.
Karnaugh maps
This document provides an overview of using Karnaugh maps to minimize Boolean expressions. It begins with an example of minimizing a 3-variable expression using both algebraic manipulation and a Karnaugh map. Key concepts discussed include grouping adjacent 1s on the map, where adjacency includes horizontal, vertical, and diagonal neighbors. Larger groups that encompass both values of a variable eliminate that term from the minimized expression. The document then demonstrates 4-variable and don't-care maps. It concludes with practice problems for the reader to write minimized expressions and truth tables for additional maps.
Two port networks
This document provides an introduction to two-port networks. It defines the standard configuration of a two-port network with inputs and outputs. It then discusses various two-port network parameter representations including Z parameters, Y parameters, transmission parameters, and hybrid parameters. Examples are provided to demonstrate calculating the parameters for simple resistive networks. The document also discusses modifying existing two-port networks by adding external elements and transforming between parameter representations.
Two port network
This document defines and describes network functions for one-port and two-port networks. It explains that a one-port network has a single terminal pair that can be represented by a driving point impedance or admittance function. A two-port network has input and output ports, and can be characterized by various matrix parameters including impedance, admittance, transmission, and hybrid parameters. The document also defines driving point and transfer functions that describe the relationships between voltages and currents at the ports of a two-port network.
Solar tracking system - Report
This document provides information on solar tracking systems and photovoltaic panels. It discusses how solar tracking systems can increase the efficiency of photovoltaic panels by keeping them oriented towards the sun throughout the day. By maintaining an angle of incidence close to 0 degrees, solar tracking maximizes the amount of sunlight absorbed. This can boost the output of PV panels by 30-50% compared to fixed panels. The document also provides details on the components and functioning of solar tracking systems, including sensors, microcontrollers and motors. It examines how improvements in solar cell technology and solar tracking have increased the viability of solar power as a renewable energy source.
Viewers also liked (9)
More from Paramjeet Singh Jamwal
Introduction to MATLAB - I
MATLAB Session taken for B.Tech (EEE) 2nd year, B.Tech (EEE) 3rd year and B.Tech (ECE) 2nd year during EVEN Sem of 2016-17 at Roorkee College of Engineering.
Fundamentals of Electric Drives - Electric Drives
This document outlines the terms and conditions for a rental agreement between John Doe and Jane Smith for the lease of an apartment located at 123 Main St from January 1, 2023 through December 31, 2023. The tenant agrees to pay $1000 per month in rent and a $500 security deposit. The landlord and tenant agree to abide by their respective responsibilities regarding maintenance, repairs, guests, and noise disturbances as detailed in the contract.
DC Network Theory - Basic Electrical Engineering
The document discusses the history and development of the city of San Diego, California from its founding in 1769 by Spanish missionaries to its growth into a major city and tourist destination by the early 20th century. It provides details on the establishment of early settlements and missions by Spanish explorers, the shift to Mexican control in the 1820s, the influx of American settlers in the mid-19th century following the Mexican-American War, and the city's expansion through tourism and the development of Balboa Park, Harbor Island, and other attractions in the 1900s.
Virtual Instrumentation and Data Acquisition - PGICE - 2013
Question Paper on Virtual Instrumentation and Data Acquisition for PGICE-2013 during M.Tech third Semester at SLIET Longowal - 148106, Punjab, India.
Reliability Engineering - PGICE - 2013
Question Paper on Reliability Engineering for PGICE-2013 during M.Tech third Semester at SLIET Longowal - 148106, Punjab, India.
Reliability Engineering - PGICE - 2012
Question Paper on Reliability Engineering for PGICE-2012 during M.Tech third Semester at SLIET Longowal - 148106, Punjab, India.
Introduction to Filters under labVIEW Environment
A Practical Report on Introduction to Filters under labVIEW Environment during Third Semester of M.Tech (ICE) during session 2014-15, ODD Semester at Sant Longowal Institute of Engineering and Technology, Longowal, INDIA.
Medical Image Compression
Project Report on Medical Image Compression submitted for the award of B.Tech degree in Electrical and Electronics Engineering by Paras Prateek Bhatnagar, Paramjeet Singh Jamwal, Preeti Kumari and Nisha Rajani during session 2010-11.
Non Linear and Adaptive Control System JAN 2014
Question Paper for PGICE-13 Batch of M.Tech 1st Semester at Sant Longowal Institute of Engineering and Technology, Longowal.
Microcontroller and Embedded System JAN 2014
Question Paper for PGICE-13 Batch of M.Tech 1st Semester at Sant Longowal Institute of Engineering and Technology, Longowal.
Instrumentation System Design JAN 2014
Question Paper for PGICE-13 Batch of M.Tech 1st Semester at Sant Longowal Institute of Engineering and Technology, Longowal.
Instrumentation System Design | Assignment
Question Paper for PGICE-13 Batch of M.Tech 1st Semester at Sant Longowal Institute of Engineering and Technology, Longowal.
Digital signal processing JAN 2014
Question Paper for PGICE-13 Batch of M.Tech 1st Semester at Sant Longowal Institute of Engineering and Technology, Longowal.
Introduction to toolbox under matlab environment
This document provides instructions for using various tools within the MATLAB environment, including:
1) The Wavelet Toolbox for 1D and multi-signal wavelet analysis.
2) The Neural Network Toolbox for neural network fitting, clustering, and pattern recognition tools.
3) The Filter Design & Analysis Tool for designing high pass and notch filters.
4) Simulink for designing a PID controller. Step-by-step instructions are provided for using each tool.
Cardiovascular System
The document summarizes the major hydraulic system of the body, specifically the cardiovascular circulation system. It discusses topics like heart rate, blood volume, blood pressure, blood flow through different vessels, characteristics of blood flow, heart sounds, and common heart conditions. The key points covered are that the heart on average beats 75 times per minute, blood pressure is typically 120/80 mmHg, blood flow is determined by pressure and resistance, the heart produces lub and dub sounds from valve openings and closings, and murmurs can indicate abnormal heart issues.
Digital Signal Processing and Control System under MATLAB Environment
A practical report on Digital Signal Processing and Control System under MATLAB Environment present in M.Tech 1st Semester during session 2013-14.
Image Compression
Presentation given in the Seminar of B.Tech 6th Semester during session 2009-10 By Paramjeet Singh Jamwal, Poonam Kanyal, Rittitka Mittal and Surabhi Tyagi.
Hydrology & Site Selection of Hydro Power Plant
This document discusses hydrology and site selection considerations for hydro power plants. It begins with an introduction to hydrology, including definitions and the hydrologic cycle. It then discusses various methods to measure runoff, including empirical formulas, runoff curves, and direct discharge observations. Hydrographs and unit hydrographs are explained as tools to understand water flow over time. Flow duration curves and mass curves are also summarized as useful for assessing available water supply. The document concludes with key factors to consider for site selection, such as available water supply, water storage capacity, water head, accessibility, distance to load centers, and land characteristics.
Electromagnetic Field Theory May 2013
Question Paper asked in the fourth semester of UTU Examination.
Digital Image Processing May 2013
Question Paper asked in the B.Tech Final semester of UTU Examination.
More from Paramjeet Singh Jamwal (20)
Virtual Instrumentation and Data Acquisition - PGICE - 2013
Virtual Instrumentation and Data Acquisition - PGICE - 2013
Digital Signal Processing and Control System under MATLAB Environment
Digital Signal Processing and Control System under MATLAB Environment
Recently uploaded
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneRecently uploaded (20)
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...