Network analysis and synthesis question and answer...
•
13 likes•10,227 views
The document discusses the results of a study on the impact of climate change on coffee production. Researchers found that suitable land for coffee production could decline by up to 50% by 2050 due to rising temperatures and changing rain patterns associated with climate change. The study concludes that climate change poses a major threat to the coffee industry worldwide as suitable land decreases substantially in the coming decades if greenhouse gas emissions are not reduced.
Report
Share
Report
Share
Download to read offline
Recommended
OPERATIONS ON SIGNALS
This document discusses various operations that can be performed on signals. It was prepared by Dishant Patel, Vishal Gohel, Jay Panchal, and Manthan Panchal, and guided by Prof. Hardik Patel. The key operations discussed are time shifting, time scaling, time inversion/folding, amplitude scaling, addition, subtraction, and multiplication of signals. These basic operations are important for analyzing and manipulating signals for different purposes.
Unit iv problems - inductance
This document contains 7 problems related to electromagnetic fields and Maxwell's equations. The problems cover topics like calculating inductance of solenoids and toroids when their dimensions change, determining the torque on loops in magnetic fields, calculating self and mutual inductances of coils, and finding the energy stored in an inductor. Detailed solutions are provided for each problem involving the application of relevant equations and substitution of given values.
Chapter 4 frequency modulation
1) Frequency modulation (FM) varies the instantaneous frequency of the carrier signal in proportion to an input modulating signal. This produces sidebands around the carrier frequency.
2) FM is considered superior to amplitude modulation (AM) due to better fidelity, noise immunity, and transmission efficiency. However, FM requires more bandwidth than AM.
3) The modulation index determines the number of significant sidebands and bandwidth occupied. It is defined as the peak frequency deviation divided by the modulating signal frequency.
Amplitude modulation
The document discusses amplitude modulation (AM), which is the simplest and earliest form of modulation. AM involves varying the amplitude of a carrier signal based on the instantaneous amplitude of an information signal. It describes the basic principles of AM, including modulation index and different types of AM such as double sideband suppressed carrier AM and single sideband AM. Advantages of AM include its simplicity of implementation, while disadvantages include inefficiency in power and bandwidth usage and susceptibility to noise.
Chapter 5
Angle modulation techniques such as frequency modulation (FM) and phase modulation (PM) were introduced. FM varies the carrier frequency according to the message signal, while PM varies the carrier phase. The chapter covered the concepts of instantaneous frequency, bandwidth of angle modulated signals, generation of FM signals through direct and indirect methods, and demodulation of FM signals using discriminators and phase-locked loops. Key advantages of FM over AM include improved noise immunity and resistance to interference at the cost of increased transmission bandwidth.
noise in pcm | Communication Systems
Slide of one video tutorial from the video series named "Communication Systems by Raj Kumar Thenua".
Electrical machine Design problems with solutions
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help regulate emotions and stress levels.
Recommended
OPERATIONS ON SIGNALS
This document discusses various operations that can be performed on signals. It was prepared by Dishant Patel, Vishal Gohel, Jay Panchal, and Manthan Panchal, and guided by Prof. Hardik Patel. The key operations discussed are time shifting, time scaling, time inversion/folding, amplitude scaling, addition, subtraction, and multiplication of signals. These basic operations are important for analyzing and manipulating signals for different purposes.
Unit iv problems - inductance
This document contains 7 problems related to electromagnetic fields and Maxwell's equations. The problems cover topics like calculating inductance of solenoids and toroids when their dimensions change, determining the torque on loops in magnetic fields, calculating self and mutual inductances of coils, and finding the energy stored in an inductor. Detailed solutions are provided for each problem involving the application of relevant equations and substitution of given values.
Chapter 4 frequency modulation
1) Frequency modulation (FM) varies the instantaneous frequency of the carrier signal in proportion to an input modulating signal. This produces sidebands around the carrier frequency.
2) FM is considered superior to amplitude modulation (AM) due to better fidelity, noise immunity, and transmission efficiency. However, FM requires more bandwidth than AM.
3) The modulation index determines the number of significant sidebands and bandwidth occupied. It is defined as the peak frequency deviation divided by the modulating signal frequency.
Amplitude modulation
The document discusses amplitude modulation (AM), which is the simplest and earliest form of modulation. AM involves varying the amplitude of a carrier signal based on the instantaneous amplitude of an information signal. It describes the basic principles of AM, including modulation index and different types of AM such as double sideband suppressed carrier AM and single sideband AM. Advantages of AM include its simplicity of implementation, while disadvantages include inefficiency in power and bandwidth usage and susceptibility to noise.
Chapter 5
Angle modulation techniques such as frequency modulation (FM) and phase modulation (PM) were introduced. FM varies the carrier frequency according to the message signal, while PM varies the carrier phase. The chapter covered the concepts of instantaneous frequency, bandwidth of angle modulated signals, generation of FM signals through direct and indirect methods, and demodulation of FM signals using discriminators and phase-locked loops. Key advantages of FM over AM include improved noise immunity and resistance to interference at the cost of increased transmission bandwidth.
noise in pcm | Communication Systems
Slide of one video tutorial from the video series named "Communication Systems by Raj Kumar Thenua".
Electrical machine Design problems with solutions
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise boosts blood flow, releases endorphins, and promotes changes in the brain which help regulate emotions and stress levels.
Antenna (2)
- Antennas convert electric currents into radio waves and vice versa. They are used in various technologies including radio, television, mobile phones, WiFi, and radar.
- The first antennas were built in 1888 by Heinrich Hertz to transmit and receive electromagnetic waves. Modern antennas come in different types for applications like broadcasting, communications, and space exploration.
- Antennas work by using an oscillating current to generate oscillating electric and magnetic fields that propagate as radio waves. During reception, the antenna intercepts some power from incoming radio waves to produce a voltage for the receiver.
Antenna PARAMETERS
This document provides information on fundamental antenna parameters and concepts. It discusses:
1. How antennas convert guided waves into radiating waves and vice versa.
2. Key antenna parameters including radiation pattern, directivity, radiation resistance, efficiency, gain, bandwidth, reciprocity, effective aperture, beamwidth, and polarization matching.
3. The Friis transmission formula for calculating received power between two antennas in free space based on their gains, wavelength, and distance.
Signal
This document provides an overview of signals and systems. It defines a signal as a physical quantity that varies with time and contains information. Signals are classified as deterministic or non-deterministic, periodic or aperiodic, even or odd, energy-based or power-based, and continuous-time or discrete-time. Systems are combinations of elements that process input signals to produce output signals. Key properties of systems include causality, linearity, time-invariance, stability, and invertibility. Applications of signals and systems are found in control systems, communications, signal processing, and more.
Multirate DSP
This document discusses multirate digital signal processing. It explains that multirate systems use multiple sampling rates to process digital signals. Common operations in multirate systems are decimation, which decreases the sampling rate, and interpolation, which increases it. Decimation and interpolation can be realized through filtering and downsampling/upsampling. The document also provides examples of multirate applications like digital audio conversion and discusses tools like polyphase filters used in multirate signal processing.
Band pass filter
A band pass filter passes frequencies within a certain bandwidth, created by cascading a low pass filter with a high pass filter. The upper cutoff frequency of the band pass filter is determined by the low pass filter's cutoff frequency, while the lower cutoff frequency is determined by the high pass filter's cutoff frequency. An example calculates the capacitor and resistor values needed for the low and high pass stages to give cutoff frequencies of 1 kHz, creating a band pass filter with a bandwidth centered around 1 kHz. Band pass filters are commonly used to separate signal harmonics and in audio applications.
Butterworth filter
Salient Features:
The magnitude response is nearly constant(equal to 1) at lower frequencies
There are no ripples in passband and stop band
The maximum gain occurs at Ω=0 and it is H(Ω)=1
The magnitude response is monotonically decreasing
As the order of the filter ‘N’ increases, the response of the filter is more close to the ideal response
Need For Modulation in Communication System
This presentation will explain about the need for modulation in communication system. We made this presentation as our group assignment in Analog and Digital Communication System course in MIIT.
Angle modulation
This document discusses frequency modulation (FM). It begins by defining the angle of a carrier signal and how that angle can be varied to achieve FM or phase modulation. It then provides key details about FM, including that the message signal controls the carrier frequency. The FM signal equation is presented using Bessel functions. Important parameters like modulation index and frequency deviation are defined. Signal waveforms are shown for different input signals. The spectrum of an FM signal is discussed, including the Bessel coefficients and significant sidebands. Narrowband and wideband FM are differentiated. An example of VHF/FM radio transmission parameters is provided. Finally, power in FM signals is addressed.
6 slides
This document discusses plane wave reflection from a media interface. It begins by introducing the concepts of reflection and transmission coefficients which describe how much of an incident wave is reflected or transmitted at a boundary. It then examines plane wave reflection at normal incidence, deriving expressions for the reflected and transmitted electric and magnetic fields in two lossy media. Boundary conditions requiring the tangential field components to be continuous are applied to obtain equations relating the reflection and transmission coefficients to the material properties on either side of the interface.
Digital communication viva questions
Digital communication viva questions.( 50+)
MCQ of digital communication (50+)
communication systems MCQ. (50+)
communication systems viva questions (50+)
covered topic list:
sampling,quantization,digital,discrete,AM,FM,PM,ASK,FSK,PSK,DM,DPCM,QPSK,ADM,differences,modulation,block diagram,applications,PAM,PWM,PPM,line encoding,polar encoding,bipolar encoding,unipolar encoding,RZ,NRZ,AMI,HDB3,B8ZS
Signal classification of signal
This document discusses signals and their classification. It defines signals, analog and digital signals, periodic and aperiodic signals. It also discusses representing signals in Matlab and Simulink. Key signal types covered include exponential, sinusoidal, unit impulse and step functions. Matlab is presented as a tool for programming and analyzing discrete signals while Simulink can be used to model and simulate continuous systems.
Pulse modulation
Pulse modulation is a technique used to transmit analog information by sampling continuous signals at regular intervals and transmitting the signal as a series of pulses. There are two main types of pulse modulation: analog and digital. Pulse amplitude modulation (PAM) is the simplest form of pulse modulation, where each sample is made proportional to the amplitude of the original signal at the time of sampling. PAM follows the amplitude of the original signal and can reconstruct the signal through a low pass filter. It is easy to generate and demodulate PAM but requires a large bandwidth and more noise compared to other techniques.
FM Demodulator
Details: https://electronicsembeddedworld.blogspot.com/2018/06/performance-management-mcq.html
FM demodulation involves changing the frequency variations in a signal into amplitude variations at baseband, e.g. audio. There are several techniques and circuits that can be used each with its own advantages and disadvantages.
In any radio that is designed to receive frequency modulated signals there is some form of FM demodulator or detector. This circuit takes in frequency modulated RF signals and takes the modulation from the signal to output only the modulation that had been applied at the transmitter.
There are several types of FM detector / demodulator that can be used. Some types were more popular in the days when radios were made from discrete devices, but nowadays the PLL based detector and quadrature / coincidence detectors are the most widely used as they lend themselves to being incorporated into integrated circuits very easily...
Chapter 4
This document provides an overview of amplitude (linear) modulation techniques. It defines key concepts like modulation, baseband communication, and carrier communication. It then describes various amplitude modulation schemes including AM, DSB-SC, QAM, SSB, and VSB. Implementation and demodulation of these techniques is discussed. The document also covers frequency mixing, superheterodyne receivers, frequency division multiplexing, and carrier acquisition using phase-locked loops. Suggested problems are provided at the end.
Pulse amplitude modulation
This document discusses pulse amplitude modulation (PAM). PAM is a digital modulation technique where the amplitude of pulses is varied to represent data symbols. In PAM, each pulse amplitude corresponds to a data symbol value. The document discusses binary and M-ary PAM schemes. It also covers topics like intersymbol interference, eye diagrams, Nyquist pulse shaping criteria, and raised cosine pulse shaping to minimize intersymbol interference at the receiver. PAM is used to convert discrete amplitude symbols into analog pulses for transmission over a channel, and the receiver demodulates the signal to recover the data symbols.
Crystal Microphone
Crystal microphones operate based on the piezoelectric effect where a voltage is generated from crystals such as quartz when they experience mechanical pressure from sound waves. They consist of ceramic crystal slices with metallic electrodes attached to capture the voltage. The crystal is attached to a diaphragm so sound waves can compress and extend the crystal to generate a varying voltage proportional to the sound pressure. Crystal microphones have good sensitivity, high signal-to-noise ratio, and omnidirectional directivity. They are used in home recording systems, amateur communication, and mobile communication.
L 1 5 sampling quantizing encoding pcm
The document discusses pulse code modulation (PCM) for encoding analog waveforms into digital signals. It covers:
1. PCM involves sampling, quantizing, and encoding analog signals. Sampling makes the signal discrete in time. Quantizing makes it discrete in amplitude by rounding to discrete levels. Encoding maps quantized values to binary code words.
2. Quantization introduces distortion but sampling noise can be eliminated if the Nyquist criterion is met. Uniform quantizers are optimal for uniformly distributed inputs.
3. A practical PCM system was designed for telephone systems using 8-bit samples at 8 kHz to encode voice signals between 300-3400 Hz, producing a 64 kbps digital signal. The bandwidth
Convolution sum using graphical and matrix method
The document describes two methods for computing the convolution sum of two sequences: the graphical method and the matrix method.
The graphical method involves plotting the two sequences and calculating their point-wise multiplication at each instance of overlap as one sequence is shifted across the other.
The matrix method forms a Toeplitz matrix from one sequence and a vector from the other. The convolution sum is then computed as the matrix-vector product of these two representations.
Examples are provided to demonstrate computing the convolution sum of sample sequences using both methods.
PULSE CODE MODULATION (PCM)
It is a digital representation of an analog signal that takes samples of the amplitude of the analog signal at regular intervals. The sampled analog data is changed to, and then represented by, binary data.
Synthesis network
This document provides an overview of circuit synthesis. It discusses:
1) The differences between circuit analysis and synthesis, noting that synthesis problems do not always have solutions and solutions are not always unique.
2) The available elements for synthesis include passive circuits using resistors, capacitors, and inductors, active circuits using operational amplifiers, and digital filters.
3) Methods for synthesizing passive one-port and two-port circuits, including realizing driving point impedances and designing transfer functions like filters. Approximations are often needed due to ideal responses being non-realizable.
4) Additional details are provided on specific synthesis examples and techniques.
Network Analysis
This document discusses network analysis and its various types and applications. It provides an overview of network analysis, describes how ArcGIS Network Analyst can be used to perform different network analysis tasks like finding routes, service areas, closest facilities, and vehicle routing. It also explains key concepts in network analysis like network datasets, impedance, and location-allocation analysis.
More Related Content
What's hot
Antenna (2)
- Antennas convert electric currents into radio waves and vice versa. They are used in various technologies including radio, television, mobile phones, WiFi, and radar.
- The first antennas were built in 1888 by Heinrich Hertz to transmit and receive electromagnetic waves. Modern antennas come in different types for applications like broadcasting, communications, and space exploration.
- Antennas work by using an oscillating current to generate oscillating electric and magnetic fields that propagate as radio waves. During reception, the antenna intercepts some power from incoming radio waves to produce a voltage for the receiver.
Antenna PARAMETERS
This document provides information on fundamental antenna parameters and concepts. It discusses:
1. How antennas convert guided waves into radiating waves and vice versa.
2. Key antenna parameters including radiation pattern, directivity, radiation resistance, efficiency, gain, bandwidth, reciprocity, effective aperture, beamwidth, and polarization matching.
3. The Friis transmission formula for calculating received power between two antennas in free space based on their gains, wavelength, and distance.
Signal
This document provides an overview of signals and systems. It defines a signal as a physical quantity that varies with time and contains information. Signals are classified as deterministic or non-deterministic, periodic or aperiodic, even or odd, energy-based or power-based, and continuous-time or discrete-time. Systems are combinations of elements that process input signals to produce output signals. Key properties of systems include causality, linearity, time-invariance, stability, and invertibility. Applications of signals and systems are found in control systems, communications, signal processing, and more.
Multirate DSP
This document discusses multirate digital signal processing. It explains that multirate systems use multiple sampling rates to process digital signals. Common operations in multirate systems are decimation, which decreases the sampling rate, and interpolation, which increases it. Decimation and interpolation can be realized through filtering and downsampling/upsampling. The document also provides examples of multirate applications like digital audio conversion and discusses tools like polyphase filters used in multirate signal processing.
Band pass filter
A band pass filter passes frequencies within a certain bandwidth, created by cascading a low pass filter with a high pass filter. The upper cutoff frequency of the band pass filter is determined by the low pass filter's cutoff frequency, while the lower cutoff frequency is determined by the high pass filter's cutoff frequency. An example calculates the capacitor and resistor values needed for the low and high pass stages to give cutoff frequencies of 1 kHz, creating a band pass filter with a bandwidth centered around 1 kHz. Band pass filters are commonly used to separate signal harmonics and in audio applications.
Butterworth filter
Salient Features:
The magnitude response is nearly constant(equal to 1) at lower frequencies
There are no ripples in passband and stop band
The maximum gain occurs at Ω=0 and it is H(Ω)=1
The magnitude response is monotonically decreasing
As the order of the filter ‘N’ increases, the response of the filter is more close to the ideal response
Need For Modulation in Communication System
This presentation will explain about the need for modulation in communication system. We made this presentation as our group assignment in Analog and Digital Communication System course in MIIT.
Angle modulation
This document discusses frequency modulation (FM). It begins by defining the angle of a carrier signal and how that angle can be varied to achieve FM or phase modulation. It then provides key details about FM, including that the message signal controls the carrier frequency. The FM signal equation is presented using Bessel functions. Important parameters like modulation index and frequency deviation are defined. Signal waveforms are shown for different input signals. The spectrum of an FM signal is discussed, including the Bessel coefficients and significant sidebands. Narrowband and wideband FM are differentiated. An example of VHF/FM radio transmission parameters is provided. Finally, power in FM signals is addressed.
6 slides
This document discusses plane wave reflection from a media interface. It begins by introducing the concepts of reflection and transmission coefficients which describe how much of an incident wave is reflected or transmitted at a boundary. It then examines plane wave reflection at normal incidence, deriving expressions for the reflected and transmitted electric and magnetic fields in two lossy media. Boundary conditions requiring the tangential field components to be continuous are applied to obtain equations relating the reflection and transmission coefficients to the material properties on either side of the interface.
Digital communication viva questions
Digital communication viva questions.( 50+)
MCQ of digital communication (50+)
communication systems MCQ. (50+)
communication systems viva questions (50+)
covered topic list:
sampling,quantization,digital,discrete,AM,FM,PM,ASK,FSK,PSK,DM,DPCM,QPSK,ADM,differences,modulation,block diagram,applications,PAM,PWM,PPM,line encoding,polar encoding,bipolar encoding,unipolar encoding,RZ,NRZ,AMI,HDB3,B8ZS
Signal classification of signal
This document discusses signals and their classification. It defines signals, analog and digital signals, periodic and aperiodic signals. It also discusses representing signals in Matlab and Simulink. Key signal types covered include exponential, sinusoidal, unit impulse and step functions. Matlab is presented as a tool for programming and analyzing discrete signals while Simulink can be used to model and simulate continuous systems.
Pulse modulation
Pulse modulation is a technique used to transmit analog information by sampling continuous signals at regular intervals and transmitting the signal as a series of pulses. There are two main types of pulse modulation: analog and digital. Pulse amplitude modulation (PAM) is the simplest form of pulse modulation, where each sample is made proportional to the amplitude of the original signal at the time of sampling. PAM follows the amplitude of the original signal and can reconstruct the signal through a low pass filter. It is easy to generate and demodulate PAM but requires a large bandwidth and more noise compared to other techniques.
FM Demodulator
Details: https://electronicsembeddedworld.blogspot.com/2018/06/performance-management-mcq.html
FM demodulation involves changing the frequency variations in a signal into amplitude variations at baseband, e.g. audio. There are several techniques and circuits that can be used each with its own advantages and disadvantages.
In any radio that is designed to receive frequency modulated signals there is some form of FM demodulator or detector. This circuit takes in frequency modulated RF signals and takes the modulation from the signal to output only the modulation that had been applied at the transmitter.
There are several types of FM detector / demodulator that can be used. Some types were more popular in the days when radios were made from discrete devices, but nowadays the PLL based detector and quadrature / coincidence detectors are the most widely used as they lend themselves to being incorporated into integrated circuits very easily...
Chapter 4
This document provides an overview of amplitude (linear) modulation techniques. It defines key concepts like modulation, baseband communication, and carrier communication. It then describes various amplitude modulation schemes including AM, DSB-SC, QAM, SSB, and VSB. Implementation and demodulation of these techniques is discussed. The document also covers frequency mixing, superheterodyne receivers, frequency division multiplexing, and carrier acquisition using phase-locked loops. Suggested problems are provided at the end.
Pulse amplitude modulation
This document discusses pulse amplitude modulation (PAM). PAM is a digital modulation technique where the amplitude of pulses is varied to represent data symbols. In PAM, each pulse amplitude corresponds to a data symbol value. The document discusses binary and M-ary PAM schemes. It also covers topics like intersymbol interference, eye diagrams, Nyquist pulse shaping criteria, and raised cosine pulse shaping to minimize intersymbol interference at the receiver. PAM is used to convert discrete amplitude symbols into analog pulses for transmission over a channel, and the receiver demodulates the signal to recover the data symbols.
Crystal Microphone
Crystal microphones operate based on the piezoelectric effect where a voltage is generated from crystals such as quartz when they experience mechanical pressure from sound waves. They consist of ceramic crystal slices with metallic electrodes attached to capture the voltage. The crystal is attached to a diaphragm so sound waves can compress and extend the crystal to generate a varying voltage proportional to the sound pressure. Crystal microphones have good sensitivity, high signal-to-noise ratio, and omnidirectional directivity. They are used in home recording systems, amateur communication, and mobile communication.
L 1 5 sampling quantizing encoding pcm
The document discusses pulse code modulation (PCM) for encoding analog waveforms into digital signals. It covers:
1. PCM involves sampling, quantizing, and encoding analog signals. Sampling makes the signal discrete in time. Quantizing makes it discrete in amplitude by rounding to discrete levels. Encoding maps quantized values to binary code words.
2. Quantization introduces distortion but sampling noise can be eliminated if the Nyquist criterion is met. Uniform quantizers are optimal for uniformly distributed inputs.
3. A practical PCM system was designed for telephone systems using 8-bit samples at 8 kHz to encode voice signals between 300-3400 Hz, producing a 64 kbps digital signal. The bandwidth
Convolution sum using graphical and matrix method
The document describes two methods for computing the convolution sum of two sequences: the graphical method and the matrix method.
The graphical method involves plotting the two sequences and calculating their point-wise multiplication at each instance of overlap as one sequence is shifted across the other.
The matrix method forms a Toeplitz matrix from one sequence and a vector from the other. The convolution sum is then computed as the matrix-vector product of these two representations.
Examples are provided to demonstrate computing the convolution sum of sample sequences using both methods.
PULSE CODE MODULATION (PCM)
It is a digital representation of an analog signal that takes samples of the amplitude of the analog signal at regular intervals. The sampled analog data is changed to, and then represented by, binary data.
What's hot (20)
Viewers also liked
Synthesis network
This document provides an overview of circuit synthesis. It discusses:
1) The differences between circuit analysis and synthesis, noting that synthesis problems do not always have solutions and solutions are not always unique.
2) The available elements for synthesis include passive circuits using resistors, capacitors, and inductors, active circuits using operational amplifiers, and digital filters.
3) Methods for synthesizing passive one-port and two-port circuits, including realizing driving point impedances and designing transfer functions like filters. Approximations are often needed due to ideal responses being non-realizable.
4) Additional details are provided on specific synthesis examples and techniques.
Network Analysis
This document discusses network analysis and its various types and applications. It provides an overview of network analysis, describes how ArcGIS Network Analyst can be used to perform different network analysis tasks like finding routes, service areas, closest facilities, and vehicle routing. It also explains key concepts in network analysis like network datasets, impedance, and location-allocation analysis.
Network analysis methods for assessment & measurement
Presentation slides for a webinar produced by the Leadership Learning Community. Full audio is available on their site, at http://www.leadershiplearning.org/blog/eleanor-cooney/2012-12-17/2013-webinar-network-analysis-snaona-methods-assessment-measurement
Network analysis
Project management techniques can be used to plan, manage, and control projects through interconnected linear features represented in network diagrams and charts. These diagrams visually show dependencies between tasks using predecessor relationships to determine the order of activities and estimate project duration based on start and finish dates of each task.
Network analysis & cpm
The document discusses project management and critical path method (CPM) for project scheduling. It defines key concepts like activities, events, earliest start time, latest finish time, total float, free float and critical path. Examples are provided to illustrate how to draw a network diagram and use CPM to find the critical path and project duration. The critical path is the longest path of activities from start to finish with no float, and determines the earliest project completion date.
Network Analysis in ArcGIS
This document discusses network analysis in GIS. It describes how network analysis focuses on representing real-world networks as edge-node topologies. It discusses the basics of edges, nodes and network connectivity. It also outlines some key network properties like cost to traverse, restrictions, and temporal information. Finally, it discusses how to set up network analysis in ArcGIS and some common network analysis tasks.
Network analysis in gis
network analysis in gis content basesd on representing rivers , roads, waterlines , telecommunication lines ...plz go through it thanks
QUERY AND NETWORK ANALYSIS IN GIS
This document discusses geospatial techniques for query and network analysis in GIS. It introduces key concepts like attribute queries, spatial queries, and network analysis. Network analysis allows solving problems like finding optimal routes and closest facilities. Common network analysis techniques discussed include shortest path, closest facility, and OD cost matrix analysis. Applications mentioned are routing, resource allocation, and traveling salesman problems. The document concludes that query and network analysis techniques are useful for obtaining detailed spatial and attribute information in urban planning.
Network Analysis & Synthesis Nov 2012
This document is a six page question paper for a B.Tech third semester pre-university examination in Network Analysis & Synthesis. It contains 5 questions with multiple parts each. Students are instructed to attempt all questions. The questions cover topics like graph theory, network analysis techniques like superposition theorem, Millman's theorem and Thevenin's theorem, network parameters, driving point impedance/admittance functions, positive real functions, and Bode plots. Diagrams of electrical circuits and graphs are provided with some questions.
Network Functions
The document is a scanned copy of a contract for the sale of a residential property located in California. The contract details the purchase price of $625,000, down payment of $125,000, with the remainder of the purchase price due at closing within 30 days of acceptance. The contract is contingent upon the buyer obtaining financing.
Network Synthesis
Hurwitz Polynomial, Positive Real Function, Properties of prf, Foster-I, Foster-II, Cauer-I, Cauer-II, Properties of the L-C driving point immitance function, Properties of the R-C impedance function, Properties of R-L impedance function.
Two Port Networks
Characteristics of LTI Two port networks, Z-parameter and its Equivalent circuit, Y parameter and its equivalent circuit, Transmission parameter, Inverse Transmission , h-parameter and its equivalent circuit, g-parameter and its equivalent circuit, Condition of reciprocity, Condition of Symmetry.
Form childcare and parent services
This document contains information about a referral for grandparents raising grandchildren. It includes details such as the names, dates of birth, and social security numbers of the grandparents, mother, father, and children involved. Services are being referred from the Division of Family and Children Services and Division of Aging Services to the Office of Child Support Services. The referral form requests information about whether paternity has been established, parental marital status, adoption assistance payments, and any existing child support orders.
Ee321s3.1
This document discusses the synthesis of analogue circuits to realize a given network function. It begins by reviewing the properties and characteristics required for network functions to correspond to realizable passive circuits. It then examines four canonical forms - Foster and Cauer forms - for realizing LC, RC, and RL network functions as either impedance or admittance driving point functions through partial fraction or continued fraction expansions. Specific examples are worked through to illustrate the realization of LC network functions using the different forms. Finally, it notes the properties of RC driving point functions before discussing their realization.
ArcGIS Extensions
This document provides an overview of ArcGIS extensions that can expand the capabilities of ArcGIS. It describes extensions for specialized GIS tools, productivity enhancements, and solution-based applications. Specific extensions are highlighted that allow for advanced spatial analysis, 3D modeling and analysis, geostatistical analysis, network analysis, schematic representations, tracking of assets over time, sharing of maps, interoperability of data formats, automated quality control, workflow management, and production mapping.
Two port network
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Two Port Networks
B.Tech, Electrical and Electronics Engineering, Second Year Lecturer Notes on Network Analysis and Synthesis By Amarjeet Singh Jamwal.
Two port networks
This document provides an introduction to two-port networks. It defines the standard configuration of a two-port network with inputs and outputs. It then discusses various two-port network parameter representations including Z parameters, Y parameters, transmission parameters, and hybrid parameters. Examples are provided to demonstrate calculating the parameters for simple resistive networks. The document also discusses modifying existing two-port networks by adding external elements and transforming between parameter representations.
EE-304 Electrical Network Theory [Class Notes1] - 2013
The document defines key terms related to network topology and graph theory, including circuit elements, nodes, branches, paths, loops, and different types of graphs. It provides definitions for each term and discusses how they relate to representing electrical networks as graphs.
Visualize your Twitter network
Hands on guide to a quick visualization of a Twitter hashtag network.
EDIT: NodeXL is no longer available for free
Viewers also liked (20)
Network analysis methods for assessment & measurement
Network analysis methods for assessment & measurement
EE-304 Electrical Network Theory [Class Notes1] - 2013
EE-304 Electrical Network Theory [Class Notes1] - 2013
More from Manash Deka
What is Rights Issue by a company?
It is a basic bookish knowledge of what a Rights Issue is. Why does a company issue rights? How does a rights issue benefit the company's shareholders?
Load Frequency Control of Two Area System
This is a synopsis presentation on a project of designing and analyzing Load Frequency Control (LFC) of a two area system. This is useful for students, basically of Electrical Engineering branch. This project will be simulated in simulink of MATLAB.
Blu ray Disc and its technology
It is a powerpoint presentation which can be presented as a seminar topic in engineering. It is for branches like Computer Science, Electronics as well as Electrical. Hope you like it!!!
Electrical and Electronics Measuring Instruments
The document discusses the importance of summarization for processing large amounts of text data. Automatic summarization systems aim to generate concise summaries by identifying the most important concepts and events within source texts. However, accurately summarizing texts remains a challenging task that requires understanding language and concepts at a deep level.
Recent Developments, in the form of optical transducers, smart sensors and tr...
This document discusses recent developments in fiber optic transducers, smart sensors, micro-sensors, and smart transmitters. It provides details on how fiber optic transducers use light propagation and reflection to function as sensors. Smart sensors integrate sensing and signal processing on a single integrated chip for more precise measurements. Micro-sensors are very small mechanical devices, only 1-10 micrometers in size, that are fabricated on silicon wafers. Smart transmitters can store data digitally to perform functions like linearization and compensation for non-linearities.
Classification of transducers
Transducers can be classified in several ways:
- Active transducers generate their own power to produce an output signal proportional to the input, like piezoelectric transducers, while passive transducers require an external power source.
- Primary transducers convert a physical input directly into motion, then secondary transducers convert that motion into an electrical signal.
- Transducers can also be categorized by their transduction principle, such as capacitive, electromagnetic, inductive, piezoelectric, photovoltaic, and photoconductive.
- Analog transducers produce a continuous output signal, versus digital transducers which produce a pulse-based 0s and 1s
More from Manash Deka (6)
Recent Developments, in the form of optical transducers, smart sensors and tr...
Recent Developments, in the form of optical transducers, smart sensors and tr...
Recently uploaded
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Gas agency management system project report.pdf
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
AI for Legal Research with applications, tools
AI applications in legal research include rapid document analysis, case law review, and statute interpretation. AI-powered tools can sift through vast legal databases to find relevant precedents and citations, enhancing research accuracy and speed. They assist in legal writing by drafting and proofreading documents. Predictive analytics help foresee case outcomes based on historical data, aiding in strategic decision-making. AI also automates routine tasks like contract review and due diligence, freeing up lawyers to focus on complex legal issues. These applications make legal research more efficient, cost-effective, and accessible.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Variable frequency drive .A Variable Frequency Drive (VFD) is an electronic device used to control the speed and torque of an electric motor by varying the frequency and voltage of its power supply. VFDs are widely used in industrial applications for motor control, providing significant energy savings and precise motor operation.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Recently uploaded (20)
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member