Swapnil Hosmani is seeking a position as a Process Engineer, bringing over 11 years of experience in chemical engineering. He has a B.E. in Chemical Engineering and has worked for Jacobs Engineering and Occidental Petroleum. He is looking to utilize his expertise in process design, development, and safety engineering to contribute to organizational goals.

1. COVER LETTER
Respected Sir,
I am a B.E graduate in Chemical Engineering with 11-12 years experience and an aggregate of 75.58% (87.2% in Final
Semester), worked with JACOBS Engineering Group-Globally (US, NL and Mumbai for 8 years) and now at OCCIDENTAL head
office as a Lead/Senior Process, Concept & Safety Engineer. I will be much pleased to work efficiently and effectively as well as
grow with your prestigious organization in the field of designing, engineering and production, so as to achieve self-realization and
accomplishment of organizational goals. Hereby I attach a copy of my resume for your kind perusal.
Expecting a favorable reply,
Thanking you,
Yours faithfully,
Swapnil Hosmani
swapniljust4u@gmail.com
Muscat, Oman - 00968 95876867
Mumbai, India - 0091 9892149801

2. CURRICULUM VITAE
Swapnil Hosmani Email: swapniljust4u@gmail.com
Cell: 00968 95876867(Oman) / +91-9892149801(India) commit2job@gmail.com
OBJECTIVE
To develop my career as an efficient Process/Concept Engineer where I will be a value adding team
member, contributing innovative ideas and work for excellence of the organization. By the virtue of
commitment, teamwork and competence I would like to grow with the organization involved in Process
Design, Development and Consulting areas. Aspire to utilize my core exposure of EPC, E&P Operator &
PMC experience towards value additions to the organization as a whole and sound learning curve for
myself, peer and the juniors, as we strive to be better Technical Authorities.
WORK EXPERIENCE
Total Oil and Gas experience in Process Engineering (EPC & E&P Operator) - 11 to 12 years
Total International (Multi Cultural) exposure - about 5+ years as listed below:
 Deputed to Comprimo Sulfur Solutions®
, Amsterdam-Nederland - 6 months (2007-08)
Proprietary Licensor of Sulfur Recovery Units for 3 BASIC Engineering Projects (SRU, ARU,
TGT).
 Deputed to Office Chérifien des Phosphates (OCP), Florida, USA- 6 months (2009-
10).
BASIC Engineering and Detailed engineering of Technology transfer projects.
 Deputed to JACOBS, Nederland for British Petroleum (BP) Projects- 6 months (2011)
Joint Venture task force for FEED projects of BP, Rotterdam.
 OCCIDENTAL PETROLEUM (OXY), Muscat, Oman – 3+ years (2013-till date).
US E&P Operator for Conceptual Design and FEED related (EOR) projects.
 HAZOP participation as Process & Safety Lead/Facilitator at US-Florida, Cologne-
Germany, Vienna-Austria, OCP-Morocco, Abu Dhabi-UAE. Actively participated as Process
Lead with Project teams for 30-60-90% Model reviews and Constructability reviews held at
respective Client sites abroad.
Maximum members managed as Process Team Lead Engineer-15(12 engineers+3 designer)
1. OCCIDENTAL (OXY), MUSCAT-OMAN (April 2013 to date)
Presently deputed to Occidental head office (contracted by MMC, Oman) as Lead/Senior
Process, Safety & Conceptual Design Engineer (EOR-Facilities Engineer).
ON PLOT - Work involved conceptualizing new projects after feasibility studies to meet unrisked peak
profiles and debottleneck for Oil, Gas and Injection Water requirements, thereby presenting different
concept plans to management and making detailed reports. Troubleshooting operational constraints to
maximize yields of these Enhanced Oil Recovered (EOR) and Tight Gas fields through Water
Injection, Gas Lift, Immiscible/Miscible Gas Injection techniques. Writing Project Scope &
Design Basis for competitive bidding by EPC consultants. Approving design & deliverables by EPC
consultants, participating in Design, HSE and HAZOP reviews for Sour gas (upto 50 ppm H2S)
and Sour crude (upto 20 ppm).
Coordinating a synchronized link between Subsurface and Surface E&P facilities for
Conceptualization of existing and new infrastructure/Wells/Fields, based on projected profiles by
Reservoir Management Teams (RMT). Initiate Design and Commission Oil, Water and Gas network
to tap these reserves from isolated and unmanned Oil & Gas Wells/Fields.
Evaluating such projects based on CAPEX and OPEX parameters for award. Subsequently facilitating
HAZID study to have Design changes upfront and minimal risk quantification later.
Total Oil production of 250,000 BPD and Gas of 120 MMSCFD.
Optimization support to operations for modification and feasibility studies focused on the reliability,
safety and sustainability of all the production facilities, approving Management of Change
Procedures (MOCs) functioning as a TECHNICAL AUTHORITY.
Interacting with EPC Contractors, Subcontractors and Vendors for technical Compliance and Project
awarding by reviewing CTRs(Cost Time Resources) of compliant competitive bidders. Subsequent
review and checking of their Engineering deliverables through What If, Design Review and final
HAZOP and SIL studies and closure of relevant action items.
In-house evaluation surge analysis and Water hammer studies, PSV sizing and validations, sizing
and adequacy checks 2 Phase and 3 Phase Separator using SHELL DEPs for bulk procured long lead
items. Led all Internal Design Engineering activities through Construction.

3. Conceiving bulk Material Supply Agreements (MSAs) with prospective suppliers for Chemical
Injection (CI) and Instrument Air(IA) Skids after thorough review of their technologies and
packages. Eventually reducing procurement span of these long delivery items to reduce/minimize
production losses. Chemicals include Corrosion & Scale Inhibitor, Methanol, Oxygen & H2S scavenger,
Biocide, Sodium Hypochlorite, Demulsifiers etc.
Leading HAZOP for such Instrument Air and Compressor Package at Client /Vendor offices.
Determination of Settle Out Pressure of Compressor package using HYSYS Dynamic De pressuring
Simulation modeling. Exposure to Gas Dehydration and Treatment systems.
Analyzing liquid drop out & hydrate formation by saturating Feed gas in Hysys.
Chaired Design Review (DR) and HAZOP for Separators and Manifolds debottlenecking at Safah
North B using PHA Pro software, with signing off the DR & HAZOP Close out actions.
Participated as Process Lead in Design Review and HAZOP for CSU Crude Heater and associated
equipments installations at Safah. Facilitated several WHAT IF sessions.
Review and approval of Fire Safety documents like Hazardous Area Classification & Schedule in
line with API 505/IP-15. Analysis of Fire and Gas Cause & Effect, F&G Philosophy & Layout, Fire
Proofing requirements with respect to OXY standards.
Checking of Radiation and Dispersion studies (using SHELL FRED) as received from Consultants to
determine the pre requisite Flare Stack height and Sterile radius for personnel and equipment
exposure.
Participated as a Process Lead in HAZOP for Safah North B Separator and Far West Compressor
final HAZOP and WHAT IF study. Stations had 3 phase Separators, PCP pumps, Flare Package, KOD
and KOD pumps. Facilitated DR and WHAT IF study for several projects.
Led scope clarification meetings with Consultants, Subcontractors, Vendors etc.
Conversant with Mechanical Vapor Compression systems (MVCs) for Steam Generation/ Injection
for which OXY has pioneered to install the biggest MVCs in the world.
Contributed as Process Lead to facility Revalidation HAZOP (with QRA, IPF-LOPA) for Central
Processing Facility (CPF) and Gas Plant over a period of 4 months, done every 5 years to ascertain plant
Integrity. Conversant with Gas to Liquid (GTL) conversion technologies.
Dew point control (HC/Water) and hydrate formation analysis for Pressure Reduction Train.
OFF PLOT - Well site projects- Standardization of WELL HEAD PIDs (Free Flowing and EOR
Wells) for off plot scope, as a base reference for all new Wells (free flowing, Beam/ESP/PCP pump, Gas
lift, Gas/Water Injection Wells, Water source & disposal Wells) with Line hydraulics, Flow assurance &
Surge Analysis (using TL Net, TL Net, OLGA), Field Development. BOD, OCSP, Cause & Effect,
Hazardous Area Classification & Schedule and HAC Layout standardization. Handling Sour gas
with NACE MR0175 to prevent Sulfide stress & HIC cracking.
Study to review options for handling & management of Acid backflow from Reservoirs after Acid
Stimulation (to avoid high pH 4-corrosive backwash) to reach facilities. Report compilation of several
suggested options for presenting to Management.
Conception of Produced Water (PW) treatment Units (15000 BPD) at suction of Injection pumps to
reduce TSS in Injected water to <10 ppm (d90<3 microns), O/W <20 ppm, O2<10 ppb & 0
bacteria count. Technical Bid Evaluations (TBE) done for 24 prospective bidders to have finally 4
bidders (due to stringent OXY outlet PW specification) for commercial evaluation.
Conceptualized Unit consisted of Flocculator, Dissolved Nitrogen Flotation (DNF) skid, Multi
Media /Granular Activated Carbon (GAC) filters, O/W separator, Decanter centrifuge, Storage
& Backwash tanks and pumps, O2 Scavenger & Biocide addition skids, Ultraviolet (UV)
treatment Units, Nitrogen and IA generation Skids.
Subsequent Design Review (DR) and HAZOP/HAZID conducted to ascertain unmanned operation.
Scale up studies carried out to install 175000 BPD common unit at Central Processing Facility (CPF).
Technical and award review for Fresh Water treatment from Aquifiers with high sand of 200 ppm
and 150 Microns for Water Injections using Desander, Basket and Nut Shell Filtraters.
Detailed design of Desalination units using Reverse Osmosis, Gravity and Cartridge filters.
Participated as Process Lead for HAZOP of Acid reflux return separator skid with SGS vendor.
Deputed to Petroleum Development of Oman’s (PDO) Construction Contractor as an Engineering
Consultant for their Offplot Delivery Contract (ODC). Projects included Haima West Polymer Injection-
Feasibility study, Scope, PEFS & Polymer hydraulics (non Newtonian fluid), Cyclic Steam Stimulation
(CSS) & TDSD process-gross fluid hydraulics, viscosity & press drop reduction for flow assurance, NIMR
Fire Water Safety system Design, DR, HAZOP, IPF.
Hydrate formation study downstream choke valve & Methanol Injection rates calculation.
Preparation of H2S process analyzer datasheet for Hawqa-Khuff fields (5000 ppm H2S).
Conversant with Steam Flooding/Injection, High Pressure Cyclic Steam Stimulation (HPCSS),
Steam Assisted Gravity Drain (SAGD), Fire Flooding/Flame front with Steam generation-All
Thermal E.O.R. technologies and Polymer Injection(with surfactant and Caustic/Alkali
addition-ASP), Miscible and Immiscible Gas Injection (Natural Gas, CO2 & N2), Water

4. Flooding and Water Alternating Gas (WAG) EOR technologies. Inquisitively seeking to learn and
get a deeper insight into Plasma Pulse and Microbial Injection EOR technologies.
Presentations Delivered:
1. Enhanced Oil Recovery(EOR) techniques– Prevalent / futuristic at Mott MacDonald on 21/12/16.
2. Industrial Safety during Winterization- May 2013.
2) JACOBS ENGINEERING GROUP (MUMBAI, US- FLORIDA AND LEDIEN-NEDERLAND)
Worked with JACOBS ENGINEERING for about 8 years (from 2005 to April 2013), as a Process
Engineer with the Process Engineering Department.
• Worked with Saudi Aramco and Dow collaboration (Sadara) for FEED project. Work involved
PSV/PVRV sizing, equipment sizing, hydraulics-line and pumps, PID development and also Acoustic
Induced & Flow induced vibration (AIV/FIV) calculations. Provided significant contributions to
the project as a lead. Internal and external quality audits were accomplished successfully without
any stern remarks from auditors. Weekly monitoring of productive discipline task hours against the
budgeted Projects hours in PAR, for swift and efficient progress of the project. Initiated Weekly
team meeting for resolution and synchronization of Process team with other Design groups.
Successfully sailed the project, managing a team of 10-12 engineers through 12 months of
fruitful completion with a Client Survey Score of 95%.
• Worked for British Petroleum projects based at Euro port-Rotterdam for Basic and detailed
engineering phases. Job included preparation of PDS for BEP package, PSV load calculation/sizing,
3 Phase separator sizing and Operating manuals at Jacobs-Leiden, Holland office (deputed for 3
months-twice). Prepared an operating manual for BP specific software (E- Click) which can now
be used in 54 different languages, saving revenues. Further led a team of 6 engineers through
sizing of 108 PSVs for the same Project using BP standards and Design Criteria Guidelines.
• Also contributed to NAM projects (SHELL & EXXON-50:50 JV) in Nederland by being a part of
the work share team from Mumbai. Task included PSV sizing and hydraulics.
• Worked for AJS (AMEC-JACOBS-STORK) collaboration for a Offshore project on work share
basis. Work primarily involved pump hydraulics and separator sizing.
• Privilege of working with Basic Engineering Licensor for Diammonium Phosphate (DAP),
Nitric acid and Sulfuric acid fertilizers at Jacobs Lakeland-Florida as a lead engineer
(deputed for 4+ months) Also continued with detail engineering design for the same job till the
preliminary/final HAZOP(using PHA Works), SIL, 3D Model Reviews (30, 60 & 90%) and
Constructability reviews.
• Worked on Ammonia, Sulfuric acid and Phosphoric acid unit/systems during DAP projects.
• Worked on Basic and Detailed Engineering Packages of IGCC-Sulfur Recovery Units for
major refineries' Acid Sour Gas (H2S-200 ppm) and Tail Gas Treatment Units. Worked on Claus,
SCOT, SUPERCLAUS®
and EUROCLAUS®
technologies for Comprimo Sulfur Solutions®
, (licenser
Technology developed by Jacobs, Netherlands) being deputed to Nederland for 6 months.
• Was twice on a work assignment to Nederland for Basic Design of Engen Refinery, RSA for
Comprimo Sulfur Solutions®
to reduce H2S/SO2 to 10 ppm in treated gas & 100% Sulfur
recovery. Further SO2 Degassing, molten Sulfur handling, granulating and pelleting for transport.
• PSV sizing for Ras Tanura refinery on a work split basis with JE-Houston.
• Detail Engineering for IOCL-IOTL refinery and MRPL refinery.
• Prepared control narratives for Cooling water supply unit of Shell, Nederland.
• Completed Hydraulic Studies, PDS etc for FEED package of Exxon Mobil plant in Baton Rouge.
• Worked on HTRI, Software package for Heat Exchanger Design, for EXXON MOBIL, CIBA
SPECIALITY CHEMICALS.
Exposure during the above listed projects comprised preparation of Design Basis, PFD/ Heat & Mass
Balances, P&ID's for the licensor Basic Engineering packages, Process & Piping datasheets. Heat and
mass balance, hydraulics-pump and line, Relief Valve calculations and datasheets. Equipments
sizing & Instrument datasheets, Process Control Logic descriptions (DCS, PLC, SCADA),
Safeguarding Philosophy, Control narratives, Operating Manuals etc.
CLIENT COMMENDATIONS
 Swapnil Hosmani (Leiden, The Netherlands/Mumbai, India)
The engineering design was first class. Great job
Jan Sithole, Project Manager, Engen Petroleum Limited, Durban- SA.
Also won a client rating of 97.62% for the same project and a card of appreciation from the Vice president,
European region.

5.  A Client survey rating of 97.22% for BEP of DAP Project for OCP, Morocco client.
 Persistently appreciated by Client OXY, an US E&P Operator for swift completion of projects
with EPC consultants, Subcontractors and Vendors for Quality and scheduled delivery. Also my
consistent efforts for proactive completion of In-house projects through construction and
subsequent early production saving revenues, have been frequently acknowledged.
ACADEMIC EDUCATION
 BACHELOR OF ENGINEERING :BACHELOR OF ENGINEERING :
Branch : Chemical
Institution : SDM College Of Engg. and Tech, Dharwad
University : Vishveswaraiah Technological University
Year of passing : May-2005
Aggregate : 75.58% (Overall), 87.2% (Final Sem)
Result : First Class With Distinction
 PRE UNIVERSITY EDUCATION:PRE UNIVERSITY EDUCATION:
Board : Karnataka P U Board
Year of passing : 2001
College : G.S.S. Pre University College, Belgaum.
Percentage : 86.33% (PCM), 85.33% (Overall)
 SECONDARY EDUCATION:SECONDARY EDUCATION:
Board : Karnataka Secondary Education Board
Year of passing : 1999
School : St. Mary's High School, Belgaum.
Percentage : 91.52% (1st
Rank)
ENGINEERING PROJECT
"Extraction of Soy isolates with a very high yield of 63% and their subsequent formulation into easily
consumable products." Project was funded by VTU University and AICTE scholarship for health oriented
research for development of society, envisaged to improve malnourishment among Indian population.
TECHNICAL SKILLS
SOFTWARESOFTWARE : MS-DOS, Windows 98/Xp, AutoCAD, Smart Plan PIDs, Power Point, BASIC, C.
PACKAGEPACKAGE : Conversant with HTRI, HYSYS, ASPEN PLUS, CLAUS, PHAST, PIPESIM, FLARENET, UNISIM,
TL Net, TG Net, OLGA, PHA-Pro.
CONVERSANT LANGUAGES
ENGLISH, HINDI, MARATHI, KANNADA, GUJARATI, DUTCH (Beginner).
EXTRA INFORMATION
Possess an eloquent speech, a sound vocabulary and excellent written and oral communication skills,
with a pleasant personality, commendable business acumen and polished negotiating skills.
PERSONAL PROFILE
NAMENAME : SWAPNIL HOSMANI
DATE OF BIRTHDATE OF BIRTH : 12-05-1983 GENDERGENDER : Male
PERMANENT ADDRESSPERMANENT ADDRESS : House no 3, JER Villa-Parsiwadi
Near Dahisar Bridge, Dahisar(West), Mumbai-68.
Mob: +968 95876867 / +91 9892149801
DECLARATION
I, hereby declare that the above particulars furnished by me are true to the best of my
knowledge and belief.
SSWAPNIL HOSMANIPNIL HOSMANI

6.  A Client survey rating of 97.22% for BEP of DAP Project for OCP, Morocco client.
 Persistently appreciated by Client OXY, an US E&P Operator for swift completion of projects
with EPC consultants, Subcontractors and Vendors for Quality and scheduled delivery. Also my
consistent efforts for proactive completion of In-house projects through construction and
subsequent early production saving revenues, have been frequently acknowledged.
ACADEMIC EDUCATION
 BACHELOR OF ENGINEERING :BACHELOR OF ENGINEERING :
Branch : Chemical
Institution : SDM College Of Engg. and Tech, Dharwad
University : Vishveswaraiah Technological University
Year of passing : May-2005
Aggregate : 75.58% (Overall), 87.2% (Final Sem)
Result : First Class With Distinction
 PRE UNIVERSITY EDUCATION:PRE UNIVERSITY EDUCATION:
Board : Karnataka P U Board
Year of passing : 2001
College : G.S.S. Pre University College, Belgaum.
Percentage : 86.33% (PCM), 85.33% (Overall)
 SECONDARY EDUCATION:SECONDARY EDUCATION:
Board : Karnataka Secondary Education Board
Year of passing : 1999
School : St. Mary's High School, Belgaum.
Percentage : 91.52% (1st
Rank)
ENGINEERING PROJECT
"Extraction of Soy isolates with a very high yield of 63% and their subsequent formulation into easily
consumable products." Project was funded by VTU University and AICTE scholarship for health oriented
research for development of society, envisaged to improve malnourishment among Indian population.
TECHNICAL SKILLS
SOFTWARESOFTWARE : MS-DOS, Windows 98/Xp, AutoCAD, Smart Plan PIDs, Power Point, BASIC, C.
PACKAGEPACKAGE : Conversant with HTRI, HYSYS, ASPEN PLUS, CLAUS, PHAST, PIPESIM, FLARENET, UNISIM,
TL Net, TG Net, OLGA, PHA-Pro.
CONVERSANT LANGUAGES
ENGLISH, HINDI, MARATHI, KANNADA, GUJARATI, DUTCH (Beginner).
EXTRA INFORMATION
Possess an eloquent speech, a sound vocabulary and excellent written and oral communication skills,
with a pleasant personality, commendable business acumen and polished negotiating skills.
PERSONAL PROFILE
NAMENAME : SWAPNIL HOSMANI
DATE OF BIRTHDATE OF BIRTH : 12-05-1983 GENDERGENDER : Male
PERMANENT ADDRESSPERMANENT ADDRESS : House no 3, JER Villa-Parsiwadi
Near Dahisar Bridge, Dahisar(West), Mumbai-68.
Mob: +968 95876867 / +91 9892149801
DECLARATION
I, hereby declare that the above particulars furnished by me are true to the best of my
knowledge and belief.
SSWAPNIL HOSMANIPNIL HOSMANI