Qualcomm is developing 5G NR technology to enable a unified 5G air interface that can address diverse spectrum types, services, and deployments. 5G will transform industries and society by connecting billions of devices and delivering new immersive experiences with requirements such as ultra-low latency and ultra-high reliability. Qualcomm is leading innovations for 5G NR such as advanced channel coding, massive MIMO, and mobilizing mmWave to achieve the speed, capacity, and low latency goals of 5G over the next decade.
Ericsson brings new updates to its 5G platform. Introducing 5G network services to support operators from preparation to 5G launch. Ericsson 5G services roadmap spans across three distinct phases, Prepare, Mobilize and Launch. Through our service offerings, Operators can now evolve their 4G network and smoothly start introducing 5G, reaching new heights on their journey to 5G.
5G Network Architecture, Design and Optimisation3G4G
Presented by Prof. Andy Sutton, Principal Network Architect, Architecture & Strategy, TSO, BT at The IET '5G - State of Play' conference on 24th January 2018
*** SHARED WITH PERMISSION ***
A detailed look at what is meant by private networks, why do we need them and why the sudden interest in them. Also discussed is the 3GPP defined 5G Non-Public Networks (NPN), they architecture, implementation, pros and cons. In addition RAN sharing and Campus Networks are also discussed with regards to where they fit in the private networks.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
5G/NR wireless communication technology overview, architecture and its operating modes SA and NSA. Also an introduction to VoNR and other services overview of 5G network.
The key technologies of 5G namely MIMO and Network slicing are also explained.
A quick look at 5G System architecture in Reference point representation and in Service Based representation and also look at the different Network Functions (NFs) within the 5G System.
With the components already introduced to the market, we are making the platform truly end-to-end by launching;
- The market’s first complete 5G radio system
- The first version of an E2E Core network capable of 5G use cases based on network slices
- A 5G core network which can now be connected to 5G NR radio
This enables already today some 5G use cases, for telecom operators to capture growth opportunities for 5G & Internet of Things services for Consumers & Enterprises.
Ericsson brings new updates to its 5G platform. Introducing 5G network services to support operators from preparation to 5G launch. Ericsson 5G services roadmap spans across three distinct phases, Prepare, Mobilize and Launch. Through our service offerings, Operators can now evolve their 4G network and smoothly start introducing 5G, reaching new heights on their journey to 5G.
5G Network Architecture, Design and Optimisation3G4G
Presented by Prof. Andy Sutton, Principal Network Architect, Architecture & Strategy, TSO, BT at The IET '5G - State of Play' conference on 24th January 2018
*** SHARED WITH PERMISSION ***
A detailed look at what is meant by private networks, why do we need them and why the sudden interest in them. Also discussed is the 3GPP defined 5G Non-Public Networks (NPN), they architecture, implementation, pros and cons. In addition RAN sharing and Campus Networks are also discussed with regards to where they fit in the private networks.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
5G/NR wireless communication technology overview, architecture and its operating modes SA and NSA. Also an introduction to VoNR and other services overview of 5G network.
The key technologies of 5G namely MIMO and Network slicing are also explained.
A quick look at 5G System architecture in Reference point representation and in Service Based representation and also look at the different Network Functions (NFs) within the 5G System.
With the components already introduced to the market, we are making the platform truly end-to-end by launching;
- The market’s first complete 5G radio system
- The first version of an E2E Core network capable of 5G use cases based on network slices
- A 5G core network which can now be connected to 5G NR radio
This enables already today some 5G use cases, for telecom operators to capture growth opportunities for 5G & Internet of Things services for Consumers & Enterprises.
3GPP Packet Core Towards 5G Communication SystemsOfinno
This presentation provides an overview of 3GPP packet core and 5G systems. Some enabler features are outlined, such as network slicing. This presentation was prepared for the 20th Annual International Conference on Next Generation Internet and Related Technologies Net-Centric 2017 that was held at George Mason University.
This beginners tutorial attempts to explain Mobile Network Total Cost of Ownership or (TCO). TCO is very important concept for mobile networks they use this to ascertain how much the network will cost so that they can decide what they should charge and how much money could make.
This tutorial is more biased towards RAN as it is the biggest cost factor and plays an increasingly important role in the TCO optimization.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Get a better understanding of 5G in this "Introduction to 5G"presentation by Doug Hohulin, Nokia 4G/5G Mobile Technology, whose focus is the strategy and business development of AV, UAS, Smart City, IoT and 5G technologies. This was part of Doug's presentation at the 2017 Gigabit City Summit (GCS17)
Beginners: 5G Terminology (Updated - Feb 2019)3G4G
An updated short presentation and video looking at 5G terminology that is being used in 3GPP standards and specifications.
Terms such as NG-RAN, NR, ng-eNB, en-gNB, RIT, SRIT, Option 3, etc. will be discussed
A presentation / video looking at 5G spectrum auctions and allocations and how different types of spectrum is required for providing a perfect 5G coverage
All our slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
AN UPDATED VERSION OF THIS IS AVAILABLE HERE: https://www.slideshare.net/3G4GLtd/beginners-5g-terminology-updated-feb-2019
A short video looking at 5G terminology that is being used in standards and specifications.
This updated presentation/video looks at 5G Network Architecture options that have been proposed by 3GPP for deployment of 5G. It covers the Standalone (SA) and Non-Standalone (NSA) architecture. In the NSA architecture, EN-DC (E-UTRA-NR Dual Connectivity), NGEN-DC (NG-RAN E-UTRA-NR Dual Connectivity) and NE-DC (NR-E-UTRA Dual Connectivity) has been looked at. Finally, migration strategies proposed by vendors and operators (MNOs / SPs) have been discussed.
5G will transform the IoT, expanding the reach of 5G and mobile technologies beyond smartphones. This presentation talks about how 5G is opening doors to new use cases, what is in the 5G evolution that will address the expanding IoT needs, and what Qualcomm is doing to deliver end-to-end technologies and solutions.
Billions of connected devices and things. Billions of people. 5G will provide connectivity for all of these things and people as well as businesses and industry, bringing benefit to society. Operating machinery in hazardous environments from a remote control will be enabled through near-zero latency communication links that enable real-time video. Billions of video-enabled devices will be able to share bandwidth-hungry content. These are just a few applications that illustrate what 5G will be designed for.
3GPP Packet Core Towards 5G Communication SystemsOfinno
This presentation provides an overview of 3GPP packet core and 5G systems. Some enabler features are outlined, such as network slicing. This presentation was prepared for the 20th Annual International Conference on Next Generation Internet and Related Technologies Net-Centric 2017 that was held at George Mason University.
This beginners tutorial attempts to explain Mobile Network Total Cost of Ownership or (TCO). TCO is very important concept for mobile networks they use this to ascertain how much the network will cost so that they can decide what they should charge and how much money could make.
This tutorial is more biased towards RAN as it is the biggest cost factor and plays an increasingly important role in the TCO optimization.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Get a better understanding of 5G in this "Introduction to 5G"presentation by Doug Hohulin, Nokia 4G/5G Mobile Technology, whose focus is the strategy and business development of AV, UAS, Smart City, IoT and 5G technologies. This was part of Doug's presentation at the 2017 Gigabit City Summit (GCS17)
Beginners: 5G Terminology (Updated - Feb 2019)3G4G
An updated short presentation and video looking at 5G terminology that is being used in 3GPP standards and specifications.
Terms such as NG-RAN, NR, ng-eNB, en-gNB, RIT, SRIT, Option 3, etc. will be discussed
A presentation / video looking at 5G spectrum auctions and allocations and how different types of spectrum is required for providing a perfect 5G coverage
All our slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
AN UPDATED VERSION OF THIS IS AVAILABLE HERE: https://www.slideshare.net/3G4GLtd/beginners-5g-terminology-updated-feb-2019
A short video looking at 5G terminology that is being used in standards and specifications.
This updated presentation/video looks at 5G Network Architecture options that have been proposed by 3GPP for deployment of 5G. It covers the Standalone (SA) and Non-Standalone (NSA) architecture. In the NSA architecture, EN-DC (E-UTRA-NR Dual Connectivity), NGEN-DC (NG-RAN E-UTRA-NR Dual Connectivity) and NE-DC (NR-E-UTRA Dual Connectivity) has been looked at. Finally, migration strategies proposed by vendors and operators (MNOs / SPs) have been discussed.
5G will transform the IoT, expanding the reach of 5G and mobile technologies beyond smartphones. This presentation talks about how 5G is opening doors to new use cases, what is in the 5G evolution that will address the expanding IoT needs, and what Qualcomm is doing to deliver end-to-end technologies and solutions.
Billions of connected devices and things. Billions of people. 5G will provide connectivity for all of these things and people as well as businesses and industry, bringing benefit to society. Operating machinery in hazardous environments from a remote control will be enabled through near-zero latency communication links that enable real-time video. Billions of video-enabled devices will be able to share bandwidth-hungry content. These are just a few applications that illustrate what 5G will be designed for.
The new 5G unified air interface is being designed to not only vastly enhance mobile broadband performance and efficiency, but also scale to connect the massive Internet of Things and enable new types of services such as mission critical control that require ultra-low latency and new levels of reliability and security. The new design will unify diverse spectrum types and bands, scale from macro deployments to local hotspots and efficiently multiplex the envisioned 5G services across an extreme variation of requirements.
For more information on 5G technologies, use cases and timelines, please visit us at www.qualcomm.com/5G.
Ericsson Technology Review: Evolving LTE to fit the 5G future Ericsson
Operators have no reason to be concerned about the future of LTE in a 5G world – its upcoming releases (Rel-14 and Rel-15) are intended to deliver on the most important 5G requirements. They will include enhancements to user data rates and system capacity with FD-MIMO, improved support for unlicensed operations, and latency reduction in both control and user planes. LTE will also be modified to address new use cases such as massive machine type communication, critical communications and intelligent transport systems. Both LTE Rel-14 (scheduled for completion in March 2017) and the strong ambitions for LTE Rel-15 indicate that a smooth transition from LTE to 5G through 5G plug-ins is the best course of action.
Overview 5G Architecture Options from Deutsche TelekomEiko Seidel
At 3GPP RAN#72 5G Architecture discussion took place. This document lists all options that are under discussion.
Source: RP-161266 at RAN#72 Deutsche Telekom
AT&T View on LTE to 5G Network Migration Eiko Seidel
3GPP currently investigates possible 5G architecture options and how to migrate from LTE to 5G. The first stip will be to use Dual Connectivity with 5G while LTE is the Primary Cell. This will allow for very early deployments. Further steps are still to be defined and highly depend on the relation of EPC and Next Generation Core.
Ultra-Reliable Networks – A Mobile Operator Perspective3G4G
Presented by Critical Communications World, Amsterdam – June 2nd 2016 by Mansoor Hanif, Director of Radio Access Networks, EE
*** Shared with permission ***
4.5G: Integration of LTE and Wi-Fi networkseXplanoTech
With LTE-A getting ready to meet the IMT-Advanced requirements and fulfilling the role of promised "4G", we believe the next phase of evolution before 5G will be successful interworking of LTE and Wi-Fi networks. This whitepaper explores this feature, we call 4.5G, in detail.
Presented by Andy Sutton, Principal Network Architect - Chief Architect’s Office, TSO, BT at IET "Towards 5G Mobile Technology – Vision to Reality" seminar on 25th Jan 2017
Shared with permission
5G will be much more than just a new generation with faster peak rates. We are building a unified, more capable 5G platform to connect new industries, enable new services and empower new user experiences. This presentation details the key components for designing the unified, more capable 5G platform featuring an OFDM-based unified air interface. Learn about the key technology enablers for the 5G platform, and see how we are pioneering many of these technologies today with LTE Advanced and Wi-Fi.
For more information on 5G technologies, use cases and timelines, please visit us at www.qualcomm.com/5G.
Millimeter Wave mobile communications for 5g cellularraghubraghu
The next generation of wireless mobile communication is here know as 5G cellular which will revolutionize the way which see at wireless communication today !!!
Dr David Soldani : Leading the disruptions | Zinnov Confluence '16 MunichZinnov
Keynote delivered by David Soldani, Global Head 5G Technology, Nokia
Introduction of the most important use cases, within the three agreed usage scenarios, and spotlights on different regions. Why Nokia is the right choice for carriers and enterprises, and disclose the fundamental enabling technologies towards a new digital revolution. The talk concludes with an overview of global 5G plans and milestones, with special focus on the 3GPP standardization framework.
5G will connect virtually everything around us to transform a wide range of industries — manufacturing, automotive, logistics, and many more, and we are on track to make 5G NR — the global 5G standard — a commercial reality by 2019. However, this first phase of 5G mainly focuses on enhanced mobile broadband services, which will contribute to part of the total projected $12T 5G economy. 5G NR will continue to evolve in Release 16 and beyond to further expand 5G’s reach to new devices, services, and ecosystem players.
Over the last year, the industry has made tremendous progress towards making 5G NR a reality with Qualcomm leading the way. We have completed the first release of 3GPP 5G NR specifications, we are set to kick-off 3GPP-compliant 5G NR trials, and we are accelerating global 5G NR enhanced mobile broadband commercial deployments to start in 2019.
But yet there still remains a decent amount of mystery and skepticism around 5G NR. What exactly is 5G NR? What technologies and use cases will see first and why? Are wide-scale 2019 mobile deployments really possible? And what will the evolution of 5G NR bring beyond 2019?
How does unlicensed spectrum with NR-U transform what 5G can do for you?Qualcomm Research
NR-U brings the power of 5G to unlicensed spectrum globally. NR-U can help service providers deliver the 5G experience end-users have come to expect with or without licensed spectrum. Read more at https://www.qualcomm.com/news/onq/2020/06/11/how-does-support-unlicensed-spectrum-nr-u-transform-what-5g-can-do-you
This presentation takes a look at the technology roadmap for 5G NR millimeter wave (mmWave). Including features such as integrated access and backhaul (IAB), enhancements in beam management, mobility, coverage, and more. For more information, please visit www.qualcomm.com/mmwave
Accelerating our 5G future: a first look at 3GPP Rel-17 and beyondQualcomm Research
In December 2019, the scope of 3GPP Release 17 was decided in the Plenary meeting in Spain. This presentation outlines the details of this 3rd release of 5G standards.
Setting off the 5G Advanced evolution with 3GPP Release 18Qualcomm Research
In December 2021, 3GPP has reached a consensus on the scope of 5G NR Release 18. This is a significant milestone marking the beginning of 5G Advanced — the second wave of wireless innovations that will fulfill the 5G vision. Release 18 will build on the solid foundation set by Releases 15, 16, and 17, and it sets the longer-term evolution direction of 5G and beyond. This release will encompass a wide range of new and enhancement projects, ranging from improved MIMO and application of AI/ML-enabled air interface to extended reality optimizations and broader IoT support.
Realizing mission-critical industrial automation with 5GQualcomm Research
Manufacturers seeking better operational efficiencies, with reduced downtime and higher yield, are at the leading edge of the Industry 4.0 transformation. With mobile system components and reliable wireless connectivity between them, flexible manufacturing systems can be reconfigured quickly for new tasks, to troubleshoot issues, or in response to shifts in supply and demand.
There is a long history of R&D collaboration between Bosch Rexroth and Qualcomm Technologies for the effective application of these 5G capabilities to industrial automation use cases. At the Robert Bosch Elektronik GmbH factory in Salzgitter, Germany, this collaboration has reached new heights.
Download this deck to learn how:
• Qualcomm Technologies and Bosch Rexroth are collaborating to accelerate the Industry 4.0 transformation
• 5G technologies deliver key capabilities for mission-critical industrial automation
• Distributed control solutions can work effectively across 5G TSN networks
• A single 5G technology platform solves connectivity and positioning needs for flexible manufacturing
Currently, there is a hype around 5G, the wireless technology which is meant to deliver higher multi-Gbps peak data speeds, more reliability, massive network capacity, and increased availability, in order to empower new experiences and connect new industries. Indeed 5G, and related technology, open up an industrial Internet with the potential to deliver new digital services for long-term economic growth.
The following document is written as a summary of essentials around 5G based on already published materials. It aims at helping non-specialists to get an initial idea of the new exciting technologies and their potential impact on our future.
The essential role of Gigabit LTE and LTE Advanced Pro in the 5G WorldQualcomm Research
As the next phase in the evolution of LTE (3GPP Release 13 and beyond), LTE Advanced Pro does more than just push LTE capabilities closer towards 5G. It will also become an integral part of the 5G mobile network, providing many services essential to the 5G experience starting day one. Learn more at: https://www.qualcomm.com/invention/technologies/lte/advanced-pro
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
2. 2
Next 30 years
Interconnecting their worlds
Last 30 years
Interconnecting people
Utilizing unparalleled systems leadership in connectivity and compute
Transforming
our world
through intelligent
connected platforms
3. 3
1980s
Analog voice
AMPS, NMT, TACS
1990s
Digital voice
D-AMPS, GSM, IS-95 (CDMA)
2000s
Mobile broadband
WCDMA/HSPA+, CDMA2000/EV-DO
2010s
Mobile Internet
LTE, LTE Advanced
Mobile fueled the last 30 years—interconnecting people
4. 4
Mission-critical
services
Enhanced mobile
broadband
Massive Internet
of Things
Always-available, secure cloud access
A unifying connectivity fabric
Unifying connectivity platform for future innovation
Convergence of spectrum types/bands, diverse services, and deployments,
with new technologies to enable a robust, future-proof 5G platform
5. 5
Immersive entertainment and experiences Safer, more autonomous transportation
More autonomous manufacturing
Reliable access to remote healthcare
Improved public safety and security
Sustainable cities and infrastructure Digitized logistics and retail
More efficient use of energy/utilitiesSmarter agriculture
5G will redefine a wide range of industries
A platform for new connected services – existing, emerging and unforeseen
7. 7
Scalability to address diverse service and devices
Based on target requirements for the envisioned 5G use cases
Massive
Internet of
Things Mission-
critical
control
Enhanced
mobile broadband
Deep coverage
To reach challenging locations
Ultra-low energy
10+ years of battery life
Ultra-low complexity
10s of bits per second
Ultra-high density
1 million nodes per Km2
Extreme capacity
10 Tbps per Km2
Extreme data rates
Multi-Gbps peak rates;
100+ Mbps user experienced rates
Deep awareness
Discovery and optimization
Extreme user mobility
Or no mobility at all
Ultra-low latency
As low as 1 millisecond
Ultra-high reliability
<1 out of 100 million packets lost
Strong security
e.g. Health / government/ financial trusted
8. 8
Low bands below 1 GHz: longer range for e.g. mobile broadband and massive IoT
e.g. 600 MHz, 700 MHz, 850/900 MHz
Mid bands 1 GHz to 6 GHz: wider bandwidths for e.g. eMBB and mission-critical
e.g. 3.4-3.8 GHz, 3.8-4.2 GHz, 4.4-4.9 GHz
High bands above 24 GHz (mmWave): extreme bandwidths
e.g. 24.25-27.5 GHz, 27.5-29.5, 37-40, 64-71 GHz
Getting the most out of every bit of diverse spectrum
Licensed Spectrum
Exclusive use
Shared Spectrum
New shared spectrum paradigms
Unlicensed Spectrum
Shared use
9. 9
Adaptable to diverse deployments and topologies
5G will be deployed
and managed by a
variety of entities
Mobile operator
networks provide
ubiquitous
coverage—the
backbone of 5G
Macro
Small cell
Integrated access
and backhaul
Device-to-device
Multi-hop
topologies
10. 10
Pioneering new technologies to meet 5G NR requirements
Based on ITU vision for IMT-2020 compared to IMT-advanced
3x
spectrum
efficiency
10x
experienced
throughput
10x
decrease in end-
to-end latency
100x
network
efficiency
10x
connection
density
100x
traffic
capacity
New levels of capability and efficiency
Coordinated
spatial techniques
Multi-connectivity
Mobilizing mmWave
New shared spectrum
paradigms
Hyper dense
deployments
Advanced
receivers
Massive
MIMO
Ultra-reliable
links
Beam
forming
Grant-free uplink
transmissions,
e.g. RSMA V2V
Wide
bandwidths
Advanced
channel coding,
e.g. LDPCIntegrated access
and backhaul
Device-centric
mobility
Dynamic,
low-latency
TDD/FDD
Redundant
links
Multi-hop
Multicast
Narrowband
Internet of Things
V2N
11. 11
Simplifying 5G deployments with multi-connectivity
Fully leveraging 4G LTE and Wi-Fi investments for a seamless user experience
5G Carrier aggregation
5G / 4G / 3G / Wi-Fi
multimode deviceSmall cell Macro
4G LTE
5G below 6GHz
5G below 6GHz
5G above 6GHz
4G LTE, LTE Unlicensed and Wi-Fi
Wi-Fi 4G/5G Macro
4G below 6GHz
4G Macro
4G/5G below 6GHz
5G above 6GHz
5G NR radio access designed to utilize LTE anchor for mobility management (non-standalone) or
operate stand-alone with new multi-access 5G NextGen Core Network (NGCN)
12. 12
The path to 5G includes a strong LTE foundation
Note: Estimated commercial dates. Not all features commercialized at the same time
Rel-10/11/12
LTE Advanced
Rel-13 and beyond
LTE Advanced Pro
Rel-15 and beyond
5G NR5GNR
2015 2020
Advanced
MIMO
Carrier aggregation
Massive MIMO
Device-to-device
Shared spectrum
NB-IoT
256QAM
C-V2X
Enhanced broadcast
Gigabit-class LTE
Low Latency
Further backwards-
compatible enhancement
Significantly improve performance,
cost and energy efficiency
2010
14. 14
We are driving technology innovations to mobilize mmWave
Working with operators on trials & early deployments starting late 2017/early 20181
Qualcomm VIVE is a product of Qualcomm Atheros, Inc.
1 For limited regional fixed wireless deployments (e.g. Korea and US) operating at 28 and 39 GHz; also will be utilized for mobile wireless access trials to drive 5G NR standardization
28 GHz mmWave
RFIC development
802.11ad 60 GHz chipset
commercial for mobile devices
5G mmWave prototype
system and trial platform
1.79 cm
0.71
cm
Qualcomm®
VIVE™ 802.11ad
60 GHz technology with
a 32-antenna array
End-to-end system operating at
28 GHz demonstrating NLOS
operation and robust mobility
With integrated PA, LNA,
phase shifter, power splitters
for beamforming
15. 15
Bringing new level of performance for sub-6 GHz
5G NR sub-6 GHz prototype system and trial platform
Operating in sub-6 GHz spectrum bands
Allows for flexible deployments with ubiquitous network
coverage and a wide range of use cases
Achieving multi-Gbps at low latency
Showcases innovative Qualcomm 5G designs to efficiently
achieve multi-gigabit per second data rates and low latency
Will enable impactful 5G NR trials
Designed to flexibly track 3GPP standardization and be
utilized as a trial platform for impactful and timely 5G NR trials
Driving standardization on 5G NR
OFDM-based designs implemented on the prototype system
are being utilized to drive 3GPP standardization
Watch the demo video at: https://www.qualcomm.com/videos/5g-nr-sub-6ghz-prototype-system
16. 16
We are accelerating the path to 5G NR
Best-in-class 5G
prototype systems
and testbeds
5G standards,
technology and
research leadership
Impactful trials and
early deployments with
network operators
Modem and RFFE
leadership to solve
5G complexity
Such as advanced channel
coding, self-contained
subframe, mobilizing
mmWave, …
Roadmap to 5G significantly
more complex and faster
moving—builds upon our rich
history of industry firsts
Test, demonstrate and verify
our innovative 5G designs to
contribute to and drive
standardization
Over-the-air interoperability
testing leveraging prototype
systems and our leading
global network experience
Qualcomm Snapdragon is a product of Qualcomm Technologies, Inc.
17. 17
Continue to evolve LTE in parallel to become a critical part of the 5G Platform
5G NR R16 launches
R17 + 5G evolutionR16 5G Work Items
5G NR standardization progressing for 2019 launches
Note: Estimated commercial dates. 1 The latest plenary meeting of the 3GPP Technical Specifications Groups (TSG#72) has agreed on a detailed workplan for Release-15; 2 Forward compatibility with R16 and beyond
5G study items
R15 5G Work Items
Gigabit LTE & LTE IoT deployments
3GPP 5G NR
R14 Study Item
2016 20212017 2019 2020 20222018
5G NR R15 launches2Accelerating 5G NR1 with
trials & early deployments
18. 18
5G NR R151 will establish the 5G foundation
For enhanced mobile broadband and beyond
Optimized OFDM-based
waveforms
A common, flexible
framework
Advanced wireless
technologies
With scalable numerology and
TTI, plus optimized multiple
access for different use cases
Such as massive MIMO, robust
mmWave, advanced channel
coding, and device-centric mobility
To efficiently multiplex services and
features with a dynamic, low-latency
TDD/FDD design
Unified design across spectrum types and bands
For licensed and shared/unlicensed spectrum bands both below 6 GHz and above 6 GHz2
1 3GPP R16+ will bring continued eMBB evolution, plus new features for massive IoT and mission-critical; 2 3GPP R15 focused on spectrum bands up to ~40 GHz; R16+ will bring support for bands up to ~100 GHz
20. 201 Weighted Overlap Add; 2 Such as Resource Spread Multiple Access (RSMA) – more details later in presentation
Co-exist with optimized
waveforms and multiple
access for wide area IoT
Efficient framework
for MIMO spatial
multiplexing
Single-carrier OFDM well
suited for efficient uplink
transmissions
Windowing can effectively
minimizes in-band and
out-of-band emissions
Low complexity receivers
even when scaling to
wide bandwidths
Spectral
efficiency
Low
complexity
Frequency
localization
Lower power
consumption
Asynchronous
multiplexing
MIMO
Time
Frequency
OFDM family is the right choice for
5G mobile broadband and beyond
Adapted for scaling to an extreme
variations of 5G requirements
21. 21
Efficient service multiplexing with windowed OFDM
OFDM with WOLA1
windowing
Substantially increases frequency localization
PSD of CP-OFDM with WOLA at the transmitter
-10
-20
-30
-40
-50
-60
-70
-80
-90
-40 -30 -20 -10 0 10 20 30 40
CP-OFDM: No Clipping
+WOLA: Ideal PA
OFDM with WOLA windowing
Effectively reduces in-band and out-of-band emissions
Windowed OFDM proven in LTE system today
Alternative OFDM-approaches, such as FBMC and
UFMC, add complexity with marginal benefits
Key for 5G service multiplexing
Mitigate interference between flexible sub-carriers
Wideband
(e.g. eMBB)
Narrowband
(e.g. IoT)
Large CP
(e.g. broadcast)
Frequency
1 Weighted Overlap Add
Source: Qualcomm Research, assuming 12 contiguous data tones, 60 symbols per run, 1000 runs. CP length is set to be roughly 10% of the OFDM symbol length. For Tx-WOLA, raised-cosine edge with rolloff α≈0.078 is used.
dB
Normalized frequency [1/T]
22. 22
Download Qualcomm Research whitepaper for detailed analysis:
https://www.qualcomm.com/documents/5g-research-waveform-and-multiple-access-techniques
Optimizing for diverse services and deployments
1 With time domain windowing as common in LTE systems today; 2 Such as SC-FDE and GMSK; 3 Mission-critical service may also use OFDMA/SC-FDMA for applications that may be scheduled
Optimized for different services
Macro cell
SC-OFDM
1
+ SC-FDMA
To maximize device energy efficiency
Small cell
CP-OFDM
1
+ OFDMA
To maximize spectral efficiency
Low energy single-carrier
2
Massive IoT
CP-OFDM / SC-OFDM
1
Mission-critical
5G NR Uplink
Optimized for different deployments
5G NR Downlink
Unified downlink design
Time
Frequency
Resource Spread
Multiple Access (RSMA)
3
Grant-free transmissions efficient for sporadic
transfer of small data bursts with asynchronous,
non-orthogonal, contention-based access
Massive
IoT
Mission-
critical
Mobile
Broadband
CP-OFDM
1
+ OFDMA
Also recommended for D2D and
inter-cell communications to
maximize Tx/Rx design reuse
+
23. 23
A flexible framework with forward compatibility
Efficiently multiplex envisioned and future 5G services on the same frequency
1 Blank resources may still be utilized, but are designed in a way to not limit future feature introductions; 2 Nominal 5G access to be designed such that it is capable to sustain puncturing from mission-critical transmission or
bursty interference
Integrated framework
That can support diverse deployment
scenarios and network topologies
Scalable transmission time interval (TTI)
For diverse latency requirements—capable of
latencies an order of magnitude lower than LTE
Mission-critical transmissions
May occur at any time; design such that
other traffic can sustain puncturing2
Forward compatibility
With support for
‘blank’ resources1
Blank subcarriers
Scalable TTI MBB
D2D
Multicast
Self-contained integrated subframe
UL/DL scheduling info, data and
acknowledgement in the same sub-frame
Dynamic uplink/downlink
Faster switching for more flexible
capacity based on traffic conditions
DL ULDL UL UL
24. 24
Scalable numerology with scaling of subcarrier spacing
Efficiently address diverse spectrum, deployments and services
Subcarrier spacing
e.g. 15 kHz
Outdoor and
macro coverage
FDD/TDD <3 GHz e.g. 1, 5, 10 and 20 MHz
Indoor
wideband
TDD e.g. 5 GHz (Unlicensed)
e.g. 160MHz
mmWave
TDD e.g. 28 GHz
Outdoor and
small cell
TDD > 3 GHz
e.g. 80/100 MHz
e.g. 500MHz
Subcarrier spacing
e.g. 30 kHz
Subcarrier spacing
e.g. 60 kHz
Subcarrier spacing, e.g. 120 kHz
Example usage models and channel bandwidths
25. 25
Scalable Transmission Time Interval (TTI)
Scalable TTI for diverse latency and
QoS requirements
Longer TTI for higher
spectral efficiency
Shorter TTI for low latency
and high reliability
Scalable number of TTIs per subframe1
1 Further bundling of TTIs possible; 2 Symbols across numerologies align at symbol boundaries; 3 TTI spans integer number of symbols; 4 Subcarrier spacing
Efficient multiplexing of long & short TTIs to allow
transmissions to start on symbol boundaries2,3
1 ms subframe with 14 symbols of SCS4 = 15 kHz
0 1 2 11 12 13…
Short TTI with 2 symbols of SCS = 15 kHz0 1
0 1 2 3 4 5 6 7 Short TTI with 8 symbols of SCS = 60 kHz
500 us TTI with 14 symbols of SCS = 30 kHz0 1 2 11 12 13…
26. 26
Unlicensed spectrum
Listen-before-talk headers e.g.
Clear Channel Assessment (CCA)
and hidden node discovery
Self-contained integrated subframe design
UL/DL scheduling info, data and acknowledgement in the same sub-frame
D2D, mesh and relay
Headers for e.g. direction
of the link for dynamic
distributed scheduling
Adaptive UL/DL
Flexible configuration for
capacity allocation; also
dynamic on a per-cell basis
Massive MIMO
Leveraging channel
reciprocity in UL transmission
for DL beamforming training
Example: TDD downlink
Guard
Period
Add’l
headers
ACK
(Rx)
Ctrl
(Tx)
Data
(Tx)
Faster, more flexible TDD switching and turn around,
plus support for new deployment scenarios and forward compatibility
27. 27
New self-contained TDD design enables new use cases
Eliminates control channel interference to allow for robust, dynamic DL/UL switching
No DL UL
interference between
control channels
TDD
DL
TDD
UL
DLCTRL
UL DATA1 (User 1)
UL DATA (User 2)
UL DATA (User 3)
ULCTRL
DLCTRL
• Allows for robust, dynamic DL/UL switching driven
by different loading and traffic types
• Enables integrated access and backhaul co-channel
deployments for mmWave
DL DATA1
ULCTRL
Common
UL burst
DL UL
1 Can also be control information
28. 28
5G NR design innovations across diverse services
Enhanced Mobile
Broadband • Mobilizing mmWave
• Advanced channel coding• Shared spectrum
• Massive MIMO
• Wider bandwidths • Dynamic, low-latency TDD/FDD
• Native HetNet and multicast support• Device-centric mobility
Massive IoT
• Low complexity narrowband
• Optimized link budget
• Managed multi-hop mesh
• Low power modes for deep sleep
• Grant-free uplink transmissions
Mission-Critical Control
• Low-latency with bounded delay
• Simultaneous redundant links
• Efficient multiplexing with nominal traffic
• Grant-free uplink transmissions
• Optimized PHY/pilot/HARQ
• Reliable device-to-device links
• Efficient signaling
30. 30
Breaking the Gigabit barrier in LTE today
The first real glimpse of our 5G future
Qualcomm Snapdragon is a product of Qualcomm Technologies, Inc.
Subject to network availability
1.8 Mbps
7.2 Mbps 7.2 Mbps10.2 Mbps
21.1 Mbps
100 Mbps 100 Mbps
150 Mbps
300 Mbps
450 Mbps
600 Mbps
2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
Peakdownloadspeedsupportedinmodem(Mbps)
Approximate Date of Commercialization by Qualcomm Technologies
Qualcomm®
Snapdragon™ X16 LTE
Modem
1Gbps
Peak download
speeds of first-gen
LTE devices
Peak download
speeds of early 3G
devices
Snapdragon X12 LTE Modem
Snapdragon X10 LTE Modem
Snapdragon X7 LTE Modem
Snapdragon X5 LTE Modem
~10x>500x
31. 31
Continuing to evolve LTE for enhanced mobile broadband
Pioneering 5G technologies and ensuring a consistent user experience as 5G rolls out
Carrier Aggregation evolution—wider bandwidths
Aggregating more carriers, diverse spectrum types and across different cells
LTE in unlicensed spectrum
Make the best use of the vast amounts of unlicensed spectrum available
TDD/FDD evolution—faster, more flexible
Enable significantly lower latency, adaptive UL/DL configuration, and more
Many more antennas—path to massive MIMO
Exploit 3D beamforming (FD-MIMO) to increase capacity and coverage
Gbps+ peak rates
More uniform experience
Better coverage
Significantly lower latencies
32. 32
Designing 5G NR for significantly lower latency
10x lower latency than today’s LTE networks
1 Compared to LTE’s 8 HARQ interlaces
FDD
Fewer (variable) interlaces for HARQ1
0 1 0 1
ACK0
Data
ACK ACK1 ACK0
HARQ RTT
TDD
Self-contained design reduces RTT
Scalable TTI
Ex: TDD
downlink
Guard
Period
ACK
(Rx)
Ctrl
(Tx)
Data
(Tx)
Data and acknowledgement
in the same subframe
TTI
Improved performance by
addressing TCP/UDP
throughput limitations
Better user experience for
real-time applications such as
Video-over-IP applications
Address new latency-critical
apps such as command-and-
control of drones
33. 33
Delivering advanced 5G NR channel coding
ME-LDPC
1
codes more efficient than today’s LTE Turbo codes at higher data rates
1 Multi-Edge Low-Density Parity-Check; 2 such as Polar or TBCC
Also exploring alternative channel coding for mission-critical and massive IoT traffic
2
Easily parallelizable decoder
scales to achieve high
throughput at low complexity
Significant gains over LTE Turbo
– particularly for large block sizes
suitable for MBB
Efficient encoding/decoding
enables shorter TTI
High Efficiency Low Complexity Low Latency
Example ME-LDPC Basegraph
34. 34
Many more antennas to increase coverage and capacity
Evolving towards Massive MIMO
5G NR Rel. 15 (Massive MIMO)
Support even larger # of antenna elements
(up to 256) with new features, e.g. hybrid
beamforming, distributed MIMO
Exploit 3D beamforming
utilizing a 2D antenna array
Azimuth beamforming
Elevation beamforming
LTE Today
Fixed codebook for up to
8-antenna elements with
azimuth beamforming only
LTE Rel. 13 (FD-MIMO)
2D codebook support for 8-, 12- and
16-antenna elements with Reference
Signal enhancements for beamforming
35. 35
Massive MIMO is a key enabler for higher spectrum bands
Allows reuse of existing sites and same transmit power at e.g. 4 GHz
Source: Qualcomm Technologies, Inc. simulations; Macro-cell with 1.7km inter-site distance, 10 users per cell, 46 dBm Tx power at base station, 20MHz@2GHz and 80MHz@4GHz BW TDD, 2.4x Massive MIMO
• 1.7 km inter-site distance
• 46 dBm transmit power
Macro site 1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
10-1 100 101 102 103
CDF
3.4x 4.1x
3.9x2.7x Significant gain in cell
edge user throughput
10 users per cell
2x4 MIMO, 20 MHz @ 2 GHz
2x4 MIMO, 80 MHz @ 4 GHz
24x4 MIMO, 80 MHz @ 4 GHz
Significant capacity gain:
Average cell throughput =
808 Mbps in 80 MHz
36. 36
Shared/unlicensed spectrum is important for 5G
1) FCC ruling FCC 16-89 on 7/14/2016 allocated 3.25 MHz of licensed spectrum and 7.6 MHz of shared/unlicensed spectrum.
Shared spectrum can unlock
spectrum that is lightly used
by incumbents
Unlocking
more spectrum
High spectrum
utilization
A lot of spectrum may
be shared/unlicensed
Spectrum sharing has
the potential to increase
spectrum utilization
FCC recent decision on high-band
spectrum included a significant
portion of shared/unlicensed1
Licensed
Shared/
Unlicensed
Time
Spectrum
37. 37
We are pioneering 5G shared spectrum today
Building on LTE-U/LAA, LWA, CBRS/LSA and MulteFire1
1) Licensed-Assisted Access (LAA), LTE Wi-Fi Link Aggregation (LWA), Citizen Broadband Radio Service (CBRS), Licensed Shared Access (LSA)
Tiered sharing (incumbents)
Spectrum aggregation
Technology aggregation
Standalone unlicensed MulteFire
LTE-U / LAA
LWA (LTE + Wi-Fi)
CBRS, LSA
NR based MulteFire
NR based LAA
Multi-connectivity: NR,LTE,Wi-Fi
NR based tiered sharing
5G New Radio (NR)
Sub 6Ghz + mmWave
LTE Advanced Pro
Spectrum below 6 GHz
Shared
spectrum
technologies
38. 38
Pioneered shared/unlicensed spectrum in 4G LTE
1) Licensed Shared Access (LSA); 2) Licensed-Assisted Access (LAA); 3) Citizen Broadband Radio Service (CBRS), Priority Access Licenses (PAL), General Authorized Access (GAA)
Technically
extensive pilot in
France with Ericsson
and Red in Jan 2016
LSA1
We designed the
original proposal,
commercialized by
the LTE-U forum
LTE-U
Performed world’s
first over-the-air LAA
trial with Deutsche
Telekom Nov 2015
LAA2
A founder of the
MulteFire Alliance
and a key contributor
to its specification
A founder of the
CBRS Alliance and a
key contributor to
coexistence
CBRS3
Incumbents
PAL
GAA
39. 39
Realizing the mmWave opportunity for mobile broadband
• Robustness due to high path loss and susceptibility to blockage
• Device cost/power and RF challenges at mmWave frequencies
Mobilizing mmWave challenge
Smart beamforming
and beam tracking
Increase coverage
and minimize interference
Tight interworking
with sub 6 GHz
Increase robustness,
faster system acquisition
Optimized mmWave
design for mobile
To meet cost, power and
thermal constraints
mmWave
sub6Ghz
• Extreme bandwidths capable of Multi-Gbps data rates
• Flexible deployments (integrated access/backhaul)
• High capacity with dense spatial reuse
Extreme bandwidth opportunity
NR
Learn more at: www.qualcomm.com/documents/promise-5g-mmwave-how-do-we-make-it-mobile
40. 40
Mobilizing mmWave—live demonstration of our prototype
Millimeter Wave UE Millimeter wave base station Beamforming and scanning
Non-line-of-sight through reflection Handover Outdoor
Learn more at: www.qualcomm.com/videos/mobilizing-mmwave-5g
41. 41
Device-centric mobility management in 5G NR
Control plane improvements to improve energy and overhead efficiency
1 Coordinated MultiPoint is an LTE Advanced feature to send and receive data to and from a UE from several access nodes to ensure the optimum performance is achieved even at cell edges;
2 Minimum system information is broadcast periodically, other system information available on demand; may dynamically revert to broadcast system info when needed, e.g. system info changes
Serving
clusterEdgeless
mobility zone
(area of tightly
coordinated cells)
Periodic
sync
SIB request
Transmit
SIB
No SIB request
No SIB
transmission
Lightweight mobility
for device energy savings
• Apply COMP-like1
concepts to the
control plane
• Intra-zone mobility
transparent to the
device
Less broadcast for
network energy savings
• Low periodic beacon
for initial discovery
of device(s)
• On-demand system info
(SIB) when devices
present2
UE sends
periodic
reference
signals
Network triggers cell
reselection/handover
based on measurement
of UE signals
43. 43
Cellular technologies enable a wide range of IoT services
1 Including Cellular & LPWA M2M connections, Machina Research, June, 2016
>5B
IoT connections
by 20251
Smart cities
Lighting, traffic sensors,
smart parking,…
Mobile health
Wearables, gateways,
remote patient,…
Environmental monitoring
Agriculture, forecast fire/
air pollution sensors,…
Smart utilities
Smart grid, gas/water/
electric meters
Ubiquitous
coverage
Reliable
and secure
Global
ecosystem
Always-on
connectivity
Connected building
Security, video surveillance,
smoke detectors,…
Connected industrial
Process/equipment monitoring,
HVAC, …
Asset tracking
Fleet management, pet/kid
trackers, shipping,…
Connected retail
Vending machines, ATM,
digital ads,…
44. 44
We are evolving LTE for the Internet of Things
Paving the path to Narrowband 5G for massive IoT
Mobile Video security Wearables Object tracking
Energy managementConnected car Connected healthcare City infrastructure Smart buildings
Environment monitoringUtility metering
Today New narrowband IoT technologies (3GPP Release 13+)
LTE Cat-4 and above
>10 Mbps
n x 20 MHz
LTE Cat-1
Up to 10 Mbps
20 MHz
LTE Cat-M1 (eMTC)
Variable rate up to 1 Mbps
1.4 MHz narrowband
Cat-NB1 (NB-IoT)
10s of kbps
200 kHz narrowband
Scaling up in performance and mobility
Scaling down in complexity and power
45. 45
Scales down LTE to address the broadest
range of IoT use cases
Optimizes to lowest cost/power for delay-tolerant,
low-throughput IoT use cases; evolving with new
features such as VoLTE and positioning support
3GPP 5G NR further enhances massive IoT with
new capabilities such as RSMA1 & multi-hop mesh
5G NR will bring new capabilities for the massive IoT
NB-IoT continuing to evolve beyond Release 13—foundation of Narrowband 5G
1 Resource Spread Multiple Access
46. 46
Non-orthogonal RSMA for efficient IoT communications
Characterized by small data bursts in uplink where signaling overhead is a key issue
Grant-free transmission
of small data exchanges
• Eliminates signaling overhead
for assigning dedicated
resources
• Allows devices to transmit
data asynchronously
• Capable of supporting full
mobility
Increased
battery life
Scalability to
massive # of things
Better link
budget
Downlink remains
OFDM-based for
coexistence with other
services
47. 47
Support for multi-hop mesh with WAN management
1 Greater range and efficiency when using licensed spectrum, e.g. protected reference signals . Network time synchronization improves peer-to-peer efficiency
Problem: Uplink coverage
Due to low power devices and challenging
placements, in e.g. basement
Solution: Managed uplink mesh
Uplink data relayed via nearby devices—uplink
mesh but direct downlink.
Direct access on
licensed spectrum
Mesh on unlicensed or partitioned
with uplink licensed spectrum1
49. 49
We are pioneering mission-critical services with LTE today
Actively driving C-V2X 3GPP Release 14 Work
Item and beyond, building upon our leadership in
LTE Direct and LTE Broadcast
Testing drone operation on commercial 4G LTE networks
at FAA-authorized UAS Flight Center, representing “real
world” conditions
Cellular Vehicle-to-Everything (C-V2X) Cellular drone communications
50. 50
Pioneering C-V2X with rich roadmap to 5G
C-V2X increases reaction time over 802.11p/DSRC for improved safety use cases
Based on link level curves and the 3GPP LOS path loss model @ 10% Packet Error – Actual performance varies significantly with vehicle density and environment
Safer driving
experience
Increased driver reaction time
Support for
high speeds
Relative speeds up to 500km/h
Increased situational
awareness
Gather data from further ahead
Braking distance
~2.5secReaction time ~9.2sec
C-V2X range >450m
802.11p range ~225m
Reaction time ~3.3sec
LTE ~8dB higher link budget due to single
carrier waveform, coding gain, longer
transmission time and higher Tx power
140km/h
140km/h
0km/h
51. 51
To optimize LTE networks
and advance 5G for mission
critical services
Testing drone operation
over commercial LTE
networks
Controlled Airspace Class B
• FAA-authorized test environment
• Repressing real world” conditions with mix
of commercial, residential and rural
Early findings
• Drones at altitude are served by multiple
base stations
• Drones demonstrated seamless handovers
with zero link failures
Opportunities for optimization
• Interference management
• Handover optimization
• LTE Drone Specific Requirements
52. 52
5G NR will enable new mission-critical control services
A platform for tomorrow’s more autonomous world
Industrial
automation
Robotics
Aviation
Autonomous
vehicles
Energy/
Smart grid
Medical
Strong e2e security
Security enhancements to air interface, core
network, & service layer across verticals1
1ms e2e latency
Faster, more flexible frame structure; also new
non-orthogonal uplink access
Ultra-high availability
Simultaneous links to both 5G and LTE for
failure tolerance and extreme mobility
Ultra-high reliability
Ultra-reliable transmissions that can be time
multiplexed with nominal traffic through puncturing
1 Also exploring alternative roots of trust beyond the SIM card
53. 53
Efficient mission-critical multiplexing with other services
A more flexible design as compared to dedicated mission-critical resources (e.g. FDM)
Design such that other traffic
can sustain puncturing from
mission-critical transmission
Mission-critical transmission
may occur at any time and cannot
wait for scheduling
Nominal traffic
(with new FEC and
HARQ design)
Time
Frequency
One TTI
1st
transmission
2st
transmission
Opportunity for uplink RSMA non-orthogonal
access using OFDM waveforms
54. 54
New 5G design allows for optimal trade-offs
E.g. leveraging wider bandwidths to offset mission-critical capacity reductions
Latency vs. capacity… Reliability vs. capacity…
But wider bandwidth
can offset reductions
Mission-critical
capacity
Mission-critical
capacity
Mission-critical
capacity
Latency Latency Latency
e.g. 1e-4 BLER1
e.g. 1e-2 BLER
Example:2X bandwidth
for 3x capacity gain2
1 Low BLER Block Error Rate, required to achieve high-reliability with a hard delay bound 2 All data based on Qualcomm simulations with approximate graphs and linear scales. 3x gain when increasing from
10Mhz to 20Mhz for 1e-4 BLER.
55. As we did in 3G and 4G,
Qualcomm is leading
the world to 5G
Making 5G NR a reality
3G
4G
56. 56
We are designing a unified, more capable 5G air interface
FDD, TDD,
half duplex
Licensed, shared licensed,
and unlicensed spectrum
Spectrum bands below
1 GHz,1 GHz to 6 GHz, and
above 6 GHz (incl. mmWave)
Device-to-device, mesh,
relay network topologies
From wideband multi-Gbps
to narrowband 10s of bits
per second
Efficient multiplexing of higher-
reliability and nominal traffic
From high user mobility
to no mobility at all
From wide area macro to
indoor / outdoor hotspots
Diverse
spectrum
Diverse services
and devices
Diverse
deployments
57. 57
Also designing a flexible 5G network architecture
Leveraging virtualized network functions to create optimized network slices
• Configurable end-to-end connectivity per
vertical
• Modular, specialized network functions
per services
• Flexible subscription models
• Dynamic control and user planes with more
functionality at the edge
Better cost/energy
efficiency
Optimized
performance
Flexible biz models
and deployments
Dynamic creation
of services
Mobile broadband
Internet of Things
Mission-critical
control
58. 58
Pioneering new 5G technologies today
With our leadership and expertise in LTE and Wi-Fi
Breaking the gigabit barrier
Solving the 1000x data challenge
Enabling new spectrum paradigms
Mobilizing mmWave spectrum bands
Bringing new ways to connect
Optimizing for the Internet of Things
5G
NR
59. 59
Pioneering new 5G technologies today
With our leadership and expertise in LTE and Wi-Fi
Breaking the
gigabit barrier
Solving the 1000x
data challenge
Enabling new
spectrum paradigms
Mobilizing mmWave
spectrum bands
Bringing new
ways to connect
Optimizing for the
Internet of Things
Qualcomm® Snapdragon™ X16 LTE modem industry’s first
Gigabit Class LTE modem (4x CA, LAA, 4x4 MIMO, 256-QAM)
Technologies for hyper-densification, e.g. Qualcomm UltraSON™
self-organization and converged LTE / Wi-Fi solutions
New technologies such as LSA for sharing with incumbents,
LTE-U, LWA, LAA, MulteFire™ for over-the-air sharing
Qualcomm® VIVE 802.11ad 60 GHz chipset commercial for
mobile devices with a 32-antenna array element
LTE Direct and LTE Broadcast (including digital TV), and new
standard for Cellular V2X (C-V2X) communications
New LTE IoT technologies (eMTC, NB-IoT), and optimizing
technologies for cellular drone communications
5G
NR
60. 60
Our modem and RF leadership is critical to 5G
Roadmap to 5G is significantly more complex and faster moving
Source: Qualcomm Technologies Inc.
2,000+modem features to-date
and counting
50+ spectrum bands
450 MHz–5.8 GHz
(licensed and unlicensed)
~200 Carrier Aggregation
combinations
New LTE services, e.g.
LTE Broadcast, VoLTE
Wi-Fi, 3G, 2G
technologies
4G LTE OFDM-based
waveforms, transmission
modes, and UE categories
LTE multi-mode today
61. 61
More diverse
deployment
scenarios
Many more
spectrum
bands/types
A much
wider variation
of use cases
Advanced wireless
technologies
FDD, TDD,
half duplex
Licensed, shared
and unlicensed
From below
1 GHz to mmWave
OFDM adapted
to extremes
Massive MIMO
Robust mmWave
Mission-critical
and nominal traffic
High to no
mobility
Device-to-device,
mesh, relay
Wide area to
hotspots
Wideband to
narrowband
Roadmap to 5G
Our modem and RF leadership is critical to 5G
Roadmap to 5G is significantly more complex and faster moving
62. 62
Qualcomm Research 5G NR prototype systems
Testbed for 5G designs to drive standardization and timely commercialization
Qualcomm Research is a division of Qualcomm Technologies, Inc.
Sub-6 GHz for flexible deployments
across a wide range of use cases
End-to-end system operating sub-6 GHz and showcasing
innovations to efficiently achieve large bandwidths
capable of multi-Gbps rates at low latency
Robust mmWave for extreme
mobile broadband
End-to-end system operating at 28 GHz, demonstrating beam
forming and scanning to address non-line-of-sight scenarios,
improve indoor/outdoor range, and provide robust mobility
63. 63
Wireless/OFDM
technology and chipset
leadership
Pioneering new 5G technologies to
meet extreme requirements
End-to-end system
approach with advanced
prototypes
Driving 5G from standardization to
commercialization
Leading global
network experience
and scale
Providing the experience and
scale that 5G demands
Anyone can talk about 5G. We are creating it.
Investing in 5G for many years—building upon our leadership foundation
Learn more at www.qualcomm.com/5G
64. Questions? - Connect with Us
@Qualcomm_tech
http://www.slideshare.net/qualcommwirelessevolution
http://www.youtube.com/playlist?list=PL8AD95E4F585237C1&feature=plcp
www.qualcomm.com/wireless
BLOG
www.qualcomm.com/news/onq