Become an expert on doing quick searches to find the right ceramic part for your design, create plots for capacitance, ESR and other electrical properties, and estimate aging effect on ceramic capacitors
We are one of leading manufacturers in the field of UV sensor for various applications.We have manufactured and supplied an UV sensor based on AlGaN materials in the environment of
ISO 9001 and ISO 14001.
We have focused on every aspect of R&D and production of UV sensor. Furthermore, we are doing our best to support the practical technologies relating to UV sensor application such as UV index
monitoring.
We are developing our future products including the special sensors for gas, chemical and bio
application by adding new technologies like as MEMS, nano-scale materials.
Rail Seat Development using Dynamic Crash SimulationAltair
Developing and validating a crashworthy rail seat to a contracted rail standard represents a real challenge: The seat has to be designed so that it is strong enough to withstand the load of occupants under a high acceleration into the seat structure, but soft enough to not cause serious injuries to an occupant impacting the seat from a neighbouring row of seats. It usually involves a high number of time consuming and costly physical tests. Transcal Rail together with Altair ProductDesign UK applied advanced Finite Element (FE) analysis, using Radioss HyperWorks, to develop and optimise the seat design to meet structural requirements and record injuries from fully representative instrumented dummy models.
The physical test set up is virtually replicated including correct dummy positioning and specifying the sled pulse curve as a prescribed motion. Crucially, it can be done prior to any materials being ordered or tools manufactured thus potentially eliminating a complete prototype testing phase altogether.
The FE model can be created with various degrees of complexity depending on the amount of available data defining the original design. This initial investment in creating a representative model will bear fruit in the ability to quickly highlight pitfalls, manage design updates and perform “what-if” studies during the development phase. This enables the structure to evolve into an efficient and robust design while significantly increasing confidence levels to pass the final validation physical test.
Speakers
Pierre-Edouard Rousseau, Altair, on behalf of Transcal Rail
We are one of leading manufacturers in the field of UV sensor for various applications.We have manufactured and supplied an UV sensor based on AlGaN materials in the environment of
ISO 9001 and ISO 14001.
We have focused on every aspect of R&D and production of UV sensor. Furthermore, we are doing our best to support the practical technologies relating to UV sensor application such as UV index
monitoring.
We are developing our future products including the special sensors for gas, chemical and bio
application by adding new technologies like as MEMS, nano-scale materials.
Rail Seat Development using Dynamic Crash SimulationAltair
Developing and validating a crashworthy rail seat to a contracted rail standard represents a real challenge: The seat has to be designed so that it is strong enough to withstand the load of occupants under a high acceleration into the seat structure, but soft enough to not cause serious injuries to an occupant impacting the seat from a neighbouring row of seats. It usually involves a high number of time consuming and costly physical tests. Transcal Rail together with Altair ProductDesign UK applied advanced Finite Element (FE) analysis, using Radioss HyperWorks, to develop and optimise the seat design to meet structural requirements and record injuries from fully representative instrumented dummy models.
The physical test set up is virtually replicated including correct dummy positioning and specifying the sled pulse curve as a prescribed motion. Crucially, it can be done prior to any materials being ordered or tools manufactured thus potentially eliminating a complete prototype testing phase altogether.
The FE model can be created with various degrees of complexity depending on the amount of available data defining the original design. This initial investment in creating a representative model will bear fruit in the ability to quickly highlight pitfalls, manage design updates and perform “what-if” studies during the development phase. This enables the structure to evolve into an efficient and robust design while significantly increasing confidence levels to pass the final validation physical test.
Speakers
Pierre-Edouard Rousseau, Altair, on behalf of Transcal Rail
Led lighting suppliers in dubai uae opple mena - 1dorin braga
LED Lighting Suppliers in Dubai and Across the MENA Region
OPPLE is a fast growing Dubai lighting company, OPPLE has long delivered solution based lighting applications through an extensive range of products. The products that we offer cater to hospitality lighting, home lighting, retail lighting, industrial lighting, outdoor lighting and office lighting solutions.
KA6000 – the most comprehensive iv measuring and analysis software for perovs...Enlitech
KA6000 – The Most Comprehensive IV Measuring and Analysis Software for Perovskite Solar Cells
Original link:https://enlitechnology.com/home/products/software/ivs-ka6000/
*About Enlitech
Enlitech was founded in March 2009.
The core technologies include artificial light source and spectrum analyzing technique.Enlitech’s four main product markets include image sensor testing solutions, advanced photoelectric detector testing systems, quantum efficiency test solutions, and various light simulators.
Our popular products are QER and SS-X solar simulator. If you are interested, please visit the official website to understand more!
https://enlitechnology.com/
B Kindilien-Does Manufacturing Have a Future?jgIpotiwon
Presentation to students and educators at Eastern Connecticut State University in 2008 on the challenges, and opportunities, facing people in manufacturing.
Yokogawa's GC8000 Process Analyzer Product IntroductionYokogawa1
Yokogawa's GC8000 is a process analyzer that uses gas chromatography to measure the composition of multiple components in a stream. Engineered with reliable electronics and intelligently designed columns and valves, the GC8000 improves ease of maintenance while reducing operating costs. Its intuitive touchscreen HMI with system diagnostics reduces operation and maintenance headaches, maximizing measurement accuracy, reliability, and uptime.
Led lighting suppliers in dubai uae opple mena - 1dorin braga
LED Lighting Suppliers in Dubai and Across the MENA Region
OPPLE is a fast growing Dubai lighting company, OPPLE has long delivered solution based lighting applications through an extensive range of products. The products that we offer cater to hospitality lighting, home lighting, retail lighting, industrial lighting, outdoor lighting and office lighting solutions.
KA6000 – the most comprehensive iv measuring and analysis software for perovs...Enlitech
KA6000 – The Most Comprehensive IV Measuring and Analysis Software for Perovskite Solar Cells
Original link:https://enlitechnology.com/home/products/software/ivs-ka6000/
*About Enlitech
Enlitech was founded in March 2009.
The core technologies include artificial light source and spectrum analyzing technique.Enlitech’s four main product markets include image sensor testing solutions, advanced photoelectric detector testing systems, quantum efficiency test solutions, and various light simulators.
Our popular products are QER and SS-X solar simulator. If you are interested, please visit the official website to understand more!
https://enlitechnology.com/
B Kindilien-Does Manufacturing Have a Future?jgIpotiwon
Presentation to students and educators at Eastern Connecticut State University in 2008 on the challenges, and opportunities, facing people in manufacturing.
Yokogawa's GC8000 Process Analyzer Product IntroductionYokogawa1
Yokogawa's GC8000 is a process analyzer that uses gas chromatography to measure the composition of multiple components in a stream. Engineered with reliable electronics and intelligently designed columns and valves, the GC8000 improves ease of maintenance while reducing operating costs. Its intuitive touchscreen HMI with system diagnostics reduces operation and maintenance headaches, maximizing measurement accuracy, reliability, and uptime.
Results of DigitArc Electrode Regulator and SmartArc power input optimization...AMI GE International
AMI-GE supplies automation software to numerous metals industries worldwide, with special emphasis on electric furnace steelmaking. They hold majority market-share in AC EAF arc regulators in North America, and hence their knowledge base in this area is very strong. A recent innovation has been the development of “Smart Arc” addition to their regulator that utilizes fuzzy logic to optimize the arc to user-defined parameters. The system is flexible to receive input (and work in combination) from multiple inputs – i.e. off gas, scrap, chemical energy systems, etc.
North Star Steel’s Minnesota division is a diverse producer of long bar products. They produce a wide variety of steel grades comprising about rebar, structural, high C grinding media, and special bar quality. The melt shop is equipped with a 95 short ton VAI/Fuchs DC EAF, a ladle furnace, and a 4-strand continuous billet caster. Typical melt shop production is 500,000 short billet tons per year.
KEMET Webinar - KEMET ceramic reliability grades- which one should I choose?Ivana Ivanovska
Do you know KEMET has different reliability grade levels based on customer applications? Why would a customer choose an automotive grade ceramic capacitor over an aerospace grade capacitor? What are the difference between these and other KEMET grades? Come and find out more about this topic.
Seminar Presentation file for "Autodesk CFD for better building design" by Mr. ZHU ge.
Event Details
Seminar: Autodesk CFD for Better Building Design
Co-organized by: Autodesk / HKIBIM / IVE BIM Centre
With your BIM model, Autodesk® Simulation CFD software can provides computational fluid dynamics and thermal simulation analysis to help you create better interior and exterior design. A range of CFD modeling and thermal modeling tools are included for architectural and mechanical, electrical, and plumbing (MEP) applications. Model radiant heat transfer and occupant comfort; better predict contaminant dispersion and smoke migration in and around buildings. Study the long-term effects of diurnal heating. The Design Study Environment allows you to automate the creation of design studies, compare critical values, and predict design performance, optimize designs, and validate behavior before construction.
For more information about Autodesk® CFD: http://www.autodesk.com/products/cfd/overview
Seminar details:
Date & Time: 9-Sep-2015; 7:00pm – 8:30pm
Speaker: Ge Zhu, Technical Sales Specialist, Autodesk
He is major in Engineering Thermophysics, Master of Huazhong University of Science and Technology. He has 7 years for electrical thermal and datacenter CFD simulation experience.
Location: Lecture Theater LT-01, G/F, IVE (Morrison Hill), 6 Oi Kwan Road, Hong Kong
Agenda:
1. Why Simulation
2. Auotdesk CFD Features
3. Key Application Areas of Autodesk CFD
For any enquiry, please contact Mr. Waiky Leung at waiky.leung@autodesk.com
Multiphysics Modeling of Induction Machines_Jd'12 presMellah Hacene
in this paper we interest to how we can validate simultaneously a thermal model and estimated variable of induction motor. This approach is possible by using special simulation package frequently exploited bout in university and industry. A simple description of each one of this famous software is presented.
According to our needs and means; I took a justified choice of the used software in this validation context. In this moment, I make
only the modeling of an induction machine without takes into account the heating effects. Same simulation results of induction
motor model by Maxwell software is given and commented.
Analysis Guide for Electronics / Electrical Product DesignersSOLIDWORKS
In this paper we outline the key design performance issues facing electronics and electrical product manufacturers, and identify the benefits of using SolidWorks® Simulation software for electronics and electrical product design. The paper describes the types of analyses that SolidWorks Simulation software can perform and proves why these analyses are critical to electrical and electronic product engineering.
KEMET Webinar - Tantalum Polymer Surface Mount Capacitors New Industrial Appl...Ivana Ivanovska
Are you a designer looking for the last news in Industrial solutions? Based in industrial automation and miniaturization the Tantalum Polymer SMD T521 Series are key products offering better capacitance stability, better capacitance retention, lower ESR, higher ripple handling, and long life. The new product offering also allow miniaturization and high performance. In this presentation, the product features and electrical performance of new product offerings will be provided.
KEMET Webinar - Extended series for axial electrolytic capacitorsIvana Ivanovska
Learn more about the applications where our combined axial electrolytic capacitors with 80 VDC/high temperature can be used.
Our engineers will speak about the performances of the series
KEMET Webinar -High voltage ceramics capacitors, shocking!!!Ivana Ivanovska
High Voltage Ceramics Capacitors, Shocking!!! So you want to ramp up the voltage in your design. Have you considered what type of ceramic capacitor to use? Have you taken steps to prevent surface arcing? KEMET is a leader in high voltage ceramic capacitors providing solutions for commercial, automotive, military, and industrial applications. This webinar will review key considerations when designing in a high voltage ceramic capacitor along with ways to miniaturize your circuit without the fear of arcing.
KEMET Webinar -C44U_C44P-R Power Can Film CapacitorsIvana Ivanovska
Please find the presentation from our webinar where you can learn more about the applications where our C44U and C44P-R series can be used.
Our engineers speak about the performances of the series
KEMET Webinar - Ceramic Safety Capacitors, Avoiding the ConfusionIvana Ivanovska
Do you know what Safety Capacitors are used for? Are they actually used to keep you safe? This webinar will review why safety capacitors are used in almost every device that needs power and what distinguishes them from a "regular" capacitor.
KEMET Webinar - Large-current power inductors TPIIvana Ivanovska
The KEMET TPI ferrite core inductors are designed for
a very low core loss. Its’ flat wire, “1 turn through the construction” design, enables high efficiency at large currents. The core material used is ideal for high switching frequency applications. TPI power inductors can be used up to 125°C ambient temperature as a resonant inductor in LLC converter applications or for EMI reduction on processor boards up to 50A.
KEMET Webinar - KEMET Electrolytic ALC70 and ALC80 seriesIvana Ivanovska
Learn about KEMET'S new Snap-In Electrolytic Capacitor series with increased CV values. KEMET High CV snap-in capacitors offer high performance and reliability in a wide range of case sizes and voltage ratings, featuring high ripple currents and long-life performance. Volumetric efficiency ensures the maximum capacitance capability in a smaller size.
The KEMET PLT pulse transformers are common mode choke coils suitable for Power Line Communication (PLC). Designed with our proprietary ferrite core, they show excellent insertion loss characteristics. 264 VAC maximum power supply line for Power Line Communication (PLC) is one option with an operating temperature range from −25°C to +100°C.
KEMET Webinar - C4AQ/C4AF power box film capacitorsIvana Ivanovska
Join us on the webinar to learn more about the applications where our C4AQ and C4AF series can be used.
Our engineers will speak about the performances of the series
KEMET Webinar - Autonomous driving - 1st to market T598 125C with single digi...Ivana Ivanovska
In 2015 technical breakthroughs allowing full AEC-Q200 qualification of tantalum polymer caps have addressed the concerns with capability and safety. Alleviation of these concerns have come at a time when market drivers such as connectivity and self-driving functionality are requiring better capacitance solutions for the various CPU, logic, and input rails. In regards to new automotive requirements with electrical vehicles and autonomous driving ultra low ESR and extended life capability are a must. In this presentation, the product features and electrical performance, including accelerated storage performance, of these fully qualified 125ºC AEC-Q200 polymer tantalum capacitors will be provided.
KEMET Webinar - Update on ESA and military standard portfolioIvana Ivanovska
KEMET has successfully launched several High Reliability Tantalum Polymer SMD solutions to the market during the last years. The existing series T540/T541 based on the Mil 55365 specification and T583 ESCC3012/005 provide better capacitance stability, better capacitance retention, lower ESR, higher ripple handling, and long life combined with extreme requirements of Military, Defense and Aerospace applications. Leading the market and bringing innovation to these high demanding segments drive us to continuously expand our portfolio. We will up-date you on T580/T581 1st to market Military Polymer Standard and the T584 series, the ESA ultra-low ESR expansion.
KEMET Webinar - Expanding to ultra small footprintIvana Ivanovska
Are you a designer looking for Automotive Capacitor alternatives? The existing full AEC-Q200 qualified series T598 (125ºC) and T599 (150ºC) form KEMET can help to provide better capacitance stability, better capacitance retention, lower ESR, higher ripple handling, and long life. However if you are seeking for extreme miniaturization check out the KEMET's latest development in the new 3216-12 (EIA1206) and 2012-10 (EIA 0805) case sizes and you can benefit with significant space board and piece count reduction.
KEMET Webinar - What’s a Ceramic DC-LINK Capacitor Doing in My Power Converter?Ivana Ivanovska
To meet the growing demand of higher efficiency power converters, designers are utilizing fast switching wide bandgap (WBG) semiconductors which operate at higher voltages, temperatures, and frequencies. However, just implementing WBG semiconductors are not enough to realize the maximum potential of new converter topologies. Designers must also select the proper passive components such as capacitors to support DC-LINK, snubber, and resonator applications. This webinar will review the wide bandgap semiconductor trend and how it impacts selection of capacitors for high efficiency designs.
To meet the growing demand of higher efficiency power converters, designers are utilizing fast switching wide bandgap (WBG) semiconductors which operate at higher voltages, temperatures, and frequencies. However, just implementing WBG semiconductors are not enough to realize the maximum potential of new converter topologies. Designers must also select the proper passive components such as capacitors to support DC-LINK, snubber, and resonator applications. This webinar will review the wide bandgap semiconductor trend and how it impacts selection of capacitors for high efficiency designs.
Kemet webinar - Expanding to 75V automotive gradeIvana Ivanovska
Are you a designer looking for Automotive Capacitor alternatives? The existing full AEC-Q200 qualified series T598 (125ºC) and T599 (150ºC) from KEMET can help to provide better capacitance stability, better capacitance retention, lower ESR, higher ripple handling, and long life. Check out KEMET´s latest releases in High Voltage Automotive Polymer Capacitors (T598 series). With rated voltages up to 75V applications like the 48V boardnet can benefit from Polymer advantages like High Volumetric efficiency, reduced Board Space & Piece Count, mechanical robustness as well as extended lifetime.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
5. KEMET.com
• Use this tool to:
http://www.kemet.com
See New Product launches Access Product Catalogs
6. Engineering Center
• Use this tool for: technical search (KEMET products, terminology,
definitions, product characteristics, applications, webinars)
https://ec.kemet.com
• How does temperature affect capacitance change in ceramic
capacitors?
EXAMPLE
8. Aging calculator
Exhibited by Ferroelectric dielectrics
Class II, III, and IV
(X7R, X5R, Y5V)
Over time,
molecular structure
changes
Material’s dielectric
constant changes
Holds less
electrical charge
Capacitance will
decline over time
What does Aging mean?
9. Aging calculator
For Class II and Class III diel
X7R, X5R, Y5V and so on
Cap decreases over time
KEMET part number C0603C105K8PACTU
But, how much?
10. Aging calculator
• Use this tool to: Create a chart of expected capacitance over
time for a specific KEMET PN.
https://ec.kemet.com/tools
https://search.kemet.com
Available in Engineering Center “Design Tools”
12. Component Edge
• Use this tool to search any KEMET PN and
to cross competitors parts.
https://search.kemet.com
1. Enter KEMET Part Number
2. Enter description or key words
3. Browse by menus
10nF 250VAC
15. Component Edge
• What’s the temperature coefficient and insulation resistance for PN
C1812C145J5JLC7800? Does it meet RoHS? Which are the benefits of the
series?
EXAMPLE
16. Component Edge
• How does C1206C102KDGACTU compare to C1206C102KDRACTU in
terms of electrical specs and which one would you rather use for pulse
applications?
EXAMPLE
17. KSIM
• Use this tool for: capacitor simulation and to export SPICE models
http://ksim.kemet.com
Determine:
• Impedance and ESR
• Capacitance and Inductance
• Current and Voltage
• Temperature Rise
• SPICE model
• Effect of combined Impedances
• Export of SPICE models
18. KSIM
Optional: external
resistance, inductance
Operating Voltage or
“DC bias”
Operating
Temperature
Start and stop
operating Frequency
PN
INPUT OUTPUT
Temp rise vs Ripple
Current
Capacitance vs Vbias
Current & Voltage
Capacitance &
Inductance (SRF)
Impedance & ESR
19. KSIM
• What’s a SPICE model and why is so import to our customers?
Simulation Program with Integrated Circuit
Emphasis
SPICE
Open-source software that simulates the operating
conditions of analog circuits.
Simulating the circuit with SPICE is the industry-
standard way to verify circuit operation at the
transistor level before committing to manufacturing
an integrated circuit.
SPICE for C1812C474J5JAC @ 25°C and 0VDC bias
20. KSIM
• What is the
impedance and ESR
of
C1206C154K2RAC
at a frequency of
1MHz with a bias of
50V at 85°C?
EXAMPLE
Impedance = 1.263 Ohms
ESR = 25.222 mOhms
21. KSIM
• What is the
maximum allowable
ripple current for
C1206C105K3RAC
at 130°C and
3MHz?
HINT: Use Current &
Voltage plot
EXAMPLE
NOTE: Temperature must be
changed to 125°C since this
is a X7R diel
Max current = 2.423 Arms