Earl Simoneau has over 30 years of experience in engineering and production roles as an electronic and electro-mechanical technician. He has worked for various companies testing, repairing, and assembling devices such as networking equipment, medical devices, LED lighting, and more. Currently, he is seeking a position supporting engineering and production through testing, troubleshooting, and repairing electronic and electro-mechanical systems and their components.

1. Earl W. Simoneau ewslkyoga@gmail.com
Native, New Hampshire resident.
Objective: Support Engineering and/or Production, as an Electronic/ Electro Mechanical Technician!
Highlights of Qualifications:
• 12 years experience as an engineering technician and about 19 years as a production technician.
• Build, test, and troubleshoot, analog and digital circuits which include the following:
Switching power supplies, CRT monitors, modems, networking equip. of 10/100 Mb and Gig copper to
fiber managed media converters, microwave and base-band communication equipment.
• Four years of experience servicing products “in house” (from field) down to the component with
or without documentation at a repair depot in Nashua, Decision One.
• Updated and wrote test procedures, block diagrams, pictorial diagrams, and schematics for the
company’s internal use (reverse engineered when documentation not available) at Decision One.
• Environment tests: delta T, delta V “4 corner test” under performance I.e. receive sensitivity, BERT.
• Computer exp. - Microsoft Office (Word & Excel), NeoOffice (OpenOffice for Mac, Text & Spreadsheet).
• Test equip. exp. - DVMs, Scopes, Agilent BERTS tester for T1/ E1, T3/ E3 signals, SmartBits BERTS
tester for 10/ 100/ Gig/ OC3 signals, logic/ spectrum/ network/ analyzers, freq. counters, signal/ pulse
generators, sweep oscillators, Light power meters, RF power meters, SPL meters, microscopes.
• Excellent soldering skills of leaded and SMD components with experience at Ai 2014, KMC
Systems 2010 - 2012, as well as, solder training at Metrobility 2001, GDI 1993, and Sanders Assoc.
MIL STD Solder Certification 1983 (annually re-certified till 1986). Some fine pitch soldering
under microscope. Soldering of copper clad and etched PCBs (constructed of phenolic, fiberglass,
ceramic, or aluminum core), plus solder flex PCBs.
• Wire wrap on bare and copper clad perforated boards (constructed of either phenolic or fiberglass).
• Build electro mechanical assemblies, plus pneumatic, fluid tube, and cable wire assemblies.
• Very patient, detail oriented, quality, safety, & environment conscious, enjoy working as a team!
Professional Experience:
8/21/15 – 9/9/15 Client: Fujifilm Diamatix Lebanon, NH https://dimatix.com/
5/27/15 – On Call Client: Dartmouth College Science Div Electronics Hanover, NH http://www.dartmouth.edu/~sdes
5/12/15 – 8/20/15 Client: Long Trail Brewery (warehouse) White River Jct, VT http://longtrail.com/
4/20/15 – 5/8/15 Client: ADI, Acrylic Designs Inc. Springfield, VT http://acrylicdesignsinc.com/
4/7/15 – 4/8/15 Client: Long Trail Brewery (warehouse) White River Jct, VT http://longtrail.com/
12/2/14 – 3/19/15 Client: Fujifilm Diamatix Lebanon, NH https://dimatix.com/
11/20/14 – 11/21/14Client: Fraen Machining, job site Fujifilm Diamatix, Lebanon, NH
11/12/14 – 11/14/14Client: NH Industries Lebanon, NH http://home.nhipulleys.com/
2014 – 2015 (Leddy Group, Nov 12th - Sept 9th) “Clients above” Lebanon, NH http://leddygroup.com/
Technician/ Assembler/ Packager, Incoming QA Inspector
• Test, debug and repair lab test equipment and more, for the college. Work part time, on call, on an as need basis.
• Repackaged beverages as a work team to fill orders at Long Trail. Work part time till full time work is provided.
• Built & packaged custom POP displays, acrylic display cases, and prep related parts. Work was part time at ADI.
• Inspected products at Fujifilm, Fraen, and NH Industries using microscopes, a die gauge, and a caliper fixture.
Founded as Spectra in 1984 with Xerox, FUJIFILM Dimatix develop drop-on-demand inkjet printheads producing high
performance digital images. Since 1968, NHI develop pulley assemblies & precision machining.
Client: Advanced Illumination “Ai” then Direct Rochester, VT www.advancedillumination.com/
2014 (Leddy Group, Jan 27th - May 16th) Direct, May 19th - Oct 10th Lebanon, NH http://leddygroup.com/
Electro Mechanical Assembler
• Built to print industrial LED light fixtures of assorted sizes, shapes, and type of illumination (direct, reflected, and backlit)
with LEDs of various wavelengths to include the colors Red, Amber, Orange, Green, Blue, Royal Blue, IR (2
wavelengths), UV, White, and Soft White at various intensities with continuous and/ or pulsed power options.
• Upon building lights, reported to Cell Coach, Manufacturing Supervisor, and/ or Quality Assurance Dept.
discrepancies found between part list order sheet and work instruction drawings for correction of either or both
documents by them via a TCN and/ or DCN as needed.
• Made suggestions for ease of assembly in which some were taken into consideration requiring work instruction
drawings to be updated by them via a TCN and/ or DCN as needed.
Ai design and manufactures Precision LED Lighting for Machine Vision and Imaging for factory floor automation.
Page 1 of 4

2. Earl W. Simoneau ewslkyoga@gmail.com
Native, New Hampshire resident.
Client: Logican Technologies Edmonton, Alberta Canada http://www.logican.com/
Job site: Victor Technologies (formerly Thermodynamics) W Lebanon, NH victortechcareers.silkroad.com
2013 (Leddy Group, Aug 19th - Nov 27th) Lebanon, NH http://leddygroup.com/
Incoming QA Inspector / Electronic Technician
• Incoming Inspection, inspected products received from Logican for Victor, at my job site for customer. Main
responsibility, inspect Main Inverter Assembly for known quality issues and report to Logican and Victor.
Additionally, required partial disassembly/ reassembly of the unit to facilitate torque checking hardware to set as
needed and document, plus report under-torqued areas found, plus report other problems as discovered. The goal
being to reduce future NCR's and repairs of units in house and units to be returned to Logican which was achieved!
• Some test & debug also performed on these assemblies, inspected incoming PCBs as needed.
Logican is a ISO 9001 contract manufacturer. Victor Technologies mission is to design and manufacture products to solve
user-end problems with branded solutions in cutting, welding and gas control.
Client: Gentex Electro- Acoustic Division Manchester, NH http://www.gentexcorp.com
2012 (Tech Needs, Oct 1st - Oct 19th) Salem, NH http://www.techneeds.com
Electronic Technician / Incoming QA Inspector
• Incoming Inspection, inspected a variety of products and tested some. Initially trained on their older Incoming
Inspection database then began being retrained on their new system once the direct employees completed their
training on the new system.
Gentex, a global provider of personal protection and situation awareness products, systems include aircrew life support
systems, helmet mounted displays, high performance textiles and communication equipment.
Client:ElbitSystemsofAmerica"KMCSystems" Merrimack,NH http://www.kmcsystems.com
2009 - 2012 (Tech Needs, Dec 28th - April 19th) Salem, NH http://www.techneeds.com
2008 - 2009 (Tech Needs, Sept 23rd - June 15th)
Engineering and Production, Electro Mechanical Technician
• Built, test, and troubleshoot to component electro/ mechanical assemblies as bread-board, prototype, and pilot
production designs of products for the lab engineers on various programs.
2008-2009 contract, Recirculating Filtered Pump "RFP" & unique air-seal trocar for laparoscopic surgery to include:
• Built to design from bread-board to production the RFP in accord with training for Engineering & Production per
KMC's Quality Procedures. Evaluate w/ Systems Engineer Test “V & V” and “ATP” Procedures.
• Test and evaluation of mechanical assemblies and components which include pneumatic pressure gauges, flow
meters, and an adjustable pressure switch, some required calibration.
• Multiple internal temp measurements vs performance were documented and graphed using Excel.
• Made suggestions in which some of my ideas were taken into consideration and some modified.
The product had to meet min noise and temp requirements within the package size constraint, plus meet or exceed the
performance requirements per customer System Requirements Specifications "SRS" which included the FDA medical
standard IEC 60601, as Surgical Equipment.
Note: Our customer changed enclosure esthetics plus features. See http://www.surgiquest.com/ about the product.
2009-2012 contract, continued pilot production run of the “RFP” plus other programs as follows:
• Performed test and eval of modules and parts for refinement and reliability of our customer's blood analyzer
product. This involved taking high speed video films of injector fluid flow performance and photos through a
microscope to inspect the injector quality, one of the goals being to achieve a laminar stream.
• Assisted the design of routing flex cables, plus vacuum and fluid tubes to a complex prototype robotic blood
slide analyzer
• Built to print, a human blood collection device for stem cell separation and research, as a pilot production run of
product per Work Instructions with several suggestions made for clarification and improvements to the Work
Instructions, that were reviewed, approved, and implemented.
KMC Systems, Inc. is a wholly owned subsidiary of Elbit Systems of America. A leading supplier of contract design,
manufacturing, and field support services for the medical and biotechnology instrumentation markets.
Client: ZOLL Medical Corporation Chelmsford, MA http://www.zoll.com/
2009 (Tech Needs, July 27th - Nov 13th) Salem, NH http://www.techneeds.com/
Repair depot Technician / Incoming QA Inspector
• Production and Repair Tech trained for assemble/ disassemble of the company's AED Plus which is an Automated
External Defibrillator.
• Called customer after test for clarification/ confirmation of customer reason for return of product as the receiving-
process to sort and shelf unit either for technician repair or return to customer if no fault found.
ZOLL designs and manufactures a variety of high quality AEDs and other heart monitor/ defibrillator units, plus rescue and
training devices, for users ranging from lay rescuers to emergency responders.
Page 2 of 4

3. Earl W. Simoneau ewslkyoga@gmail.com
Native, New Hampshire resident.
Client: EPE Corporation Manchester, NH http://www.epecorp.com/
2008 (Tech Needs, Jan 7th - July 7th) Direct, July 7th - Sept 2nd Salem, NH http://www.techneeds.com
Electronic Technician
• Test, troubleshoot, repair for MRC (Microwave Radio corporation) the MTX5000 transmitter at system to PCB to
component. These radios are used for the television broadcast industry utilizing analog and analog to digital
transmission of NTSC video with analog audio; also, digital TX of ASI/SDI video with MPEG audio to be used for the
new industry standard digital television broadcast beginning Feb 2009.
• Performed test, debug, and repair of FLIR products to include sensitive analog circuits for the power supply and
cooling circuits of the IR video.
• Entered Test Yield Log and Inspector Log info into company database for tracking repairs.
EPE is an ISO 9002 and ROHS compliant electronics manufacturing service provider. We have a proven track record in
assembling complex, low to mid volume circuit assemblies, and complete “box build” end products for many companies such
as MCR, CSI, FLIR and etc.
1999 - 2005 Metrobility Optical Systems (formerly Lancast Inc.) Merrimack, NH
Electronic Technician
• Test, troubleshoot, and repair to component, various 10 Mb, 100 Mb, and Gig, copper to fiber media converters for
LAN and WAN networks, some locally managed, while others local and remote managed capability. Additionally, I
worked on T1, E1, T3, and E3 telecom managed media converters.
• Assembled the stand alone version of these products among many others on production line for about 1.5 years as
relief assembler. Programming flash and Atmel chips was preformed.
• Test and debug via. TCL script for our automated Mfg. Test Programs.
• Built and moved inventory, via. the Test Yield Log database, and IFS database for performing Shop Orders and
other inventory control operations, to meet or exceed ISO 9001 requirements.
• Certified ISO 9001 Internal Auditor with training records.
Metrobility is an ISO 9001 mfg. designs & manufactures PC network products - managed and unmanaged media converters
for copper to fiber connection at multi-rate, telecom, Ethernet, Fast E, and Gig E data rates, plus managed line protect/
restoration equip, for First Mile connectivity solutions. Optics includes. BWDM, CWDM.
1993 - 1998 Decision One (formerly General Diagnostics Inc.) Nashua, NH
Electronic Technician
• Cleaned, update per documentation, and troubleshoot as well as repair down to component, several types of
MicroCom modems and other modems including several full duplex channel ones.
• Serviced Wang printer driver boards and power supply boards, 3-COM ‘s 10 Mb to 10 channel RS232 server, and a
DEC 4 channel terminal concentrator unit with PC interface card.
• Serviced various Xerox copy machine boards including motherboards, fax/modem cards and memory/ EPROM
cards. Initially, the first Xerox product worked on, I established a remanufacturing procedure for a key panel (that
was approved by Xerox) then trained coworkers.
• Additionally serviced several types of low and high resolution monochrome CRT monitors.
Decision One is an ISO 9000 repair depot & acquires contracts as an OEM service center.
1990 - 1992 Whistler Corporation Westford, MA
Engineering Technician
• Built, test; troubleshoot down to the component breadboards and prototypes for the lab engineers.
• Products worked on were police radar detectors, & automotive security alarms for the consumer market.
• Worked with Lotus/ Impress and WordPerfect for documenting and creating graphs of circuit performance such as
plotting the linearity of GUNN oscillators for design evaluation, as well as to monitor finished product performance of
prototypes.
• Wrote and modified programs in hp Basic, using the BLP PC card to interface with hp test equipment under PC
control, for running these tests and plotting performance.
Whistler designs and manufactures police radar/ laser detectors and automotive security alarm systems.
Page 3 of 4

4. Earl W. Simoneau ewslkyoga@gmail.com
Native, New Hampshire resident.
1986 - 1990 M/A COM MAC Chelmsford, MA
Engineering Assistant
• Supported Engineering which involve building, testing, and evaluating the performance of base-band circuits to be
used in M/A COM’s 23 GHZ point to point microwave radios for video and data (T1 and 10 Mb LAN) duplex
communications.
• Perform test and align, discriminators, filters, group delay equalizers, clock recovery, GUNN oscillators.
• Overall receiver sensitivity was measured by increasing the path loss via a variable waveguide attenuator then
measuring S+N / N ratio or a BERT threshold.
• Wrote and reviewed test procedures for production.
M/A COM MAC is a commercial products division of M/A COM that designs and manufactures microwave radios.
1983 - 1986 Sanders Associates, Inc. Merrimack, NH
Engineering Technician
• Assisted an engineer on a rack mounted Radar System Test Stand for calibrating a radar system which included,
build to print and provide suggestions on the design of the mechanical and electrical assemblies, subassemblies, as
well as test and debug the system down to the component.
• Created a flow chart of the hardware design, of the signal processor section, for a prototype radar system then used
the flow chart for debug.
• Set up an “in house” repair depot for two way VHF communications radios, self trained to service and align them
with another tech which involved mechanical cleaning, repairs, and torsion gear setting, also tuning and debug
down to module & component including some vacuum tubes. These radios were 1960’s vintage 50 lb. Beasts!
• Received Security Clearances.
Sanders Associates is a military defense contractor to design and manufacture complex military equipment.
1978 - 1983 FASFAX Corporation Nashua, NH
Part-time Electronic Technician / Assembler
• Test, calibrate, and troubleshoot various linear power supply boards, peripheral driver, sequencer, and printer
boards, monochrome CRT monitors and their video driver boards.
• Refurbished keyboards and printers, all products were repaired down to component.
FASFAX designs and manufactures electronic cash registers for the fast food industry.
Other Experience:
• Obtained retail experience working part time “sometimes as fill in” at a friend's health food store, “Earth Energies” in
Nashua, NH, over a period of approximately 15 years which included employment between my career jobs!
• Volunteered practicing massage therapy on classmates, family, and friends, while taking related classes.
• Additionally, worked about 9 months at my family's business, an animal feed and garden center “The Olde
Grindstone” in Nashua, NH from May 1998 till business closed around March 1999.
Training / Education:
KMC Quality Management System – Engineering and Manufacturing Process Training 2008 - 2012
Massage Therapy Certificate @ (incomplete), NCC, Nashua, NH (day and evening classes) 2006 - 2007
Metrobility, ISO 9001 Manufacturing Process Control, ESD Awareness, Internal Auditor 1999 - 2005
Decision One, ISO 9000 Repair Product Training Record and Internal Solder Certification 1993 - 1998
Principals of Acoustics & Meas. of Sound (seminar), B&K Instruments 1992
Radio Communications, NHVTC Nashua, NH (evening division) 1986
Intro to M68000 Hardware, Sanders Assoc. (in house course) 1985
Intro to INTEL Micro Dev. Sys., Sanders Assoc. (in house course) 1983
MIL STD Solder Certification, Sanders -Annual Re-certified 1983 - 1986
A.S. Electronics, Major Applied Computer Tech, NCC (formerly NHVTC), Nashua (day division) 1979 - 1983
Additional classes of interest taken include... Biology, Human Biology, a writing course, and guitar.
Took Seminar for Microsoft Office (Word & Excel) plus previous exp, and NeoOffice (Mac version of OpenOffice) self taught.
@ = Massage Therapy I & II, Sports Massage, Anatomy and Physiology, Kinesiology, Reflexology and more!
Page 4 of 4