1. Eng. Akram Mohamed Abd El-Aty
Current Location Saudi Arabia
Mobile: 00966- 539046869 KSA
E-mail: akram.hefnawi@gmail.com
Career Objective:
Having over 7 years of experience in EHV/HV Substation and oil and gas Electrical works, I am aspiring to
acquire a position in which I will be able to utilize my skills and knowledge to reach my goals as well as the
objectives of the organization in which I am employed in.
Educational Background:
- Masters Degree of in Electrical Power and Machines Engineering:
Faculty of Engineering – Ain Shames University, Cairo, Egypt
Thesis point “Enhancing Photovoltaic Performance and modeling using Matlab
Simulink”
Supervised by: Prof. Dr./Mohamed El-Sayad
Prof. Dr./Adel Emara
September 2010 – June 2014
Over all Grad Very Good (B+) (GPA=3.58)
- Bachelor Degree of in Electrical Power and Machines Engineering:
Faculty of Engineering – Ain Shames University, Cairo, Egypt
Thesis point “Enhancing Photovoltaic Performance and modeling using Matlab
Simulink”
Supervised by: Prof. Dr./Mohamed El-Sayad and Prof. Dr./Adel Emara
September 2004 – June 2009
Over all Grad Good
Graduation project: "AC to AC" converter Based on space vector current and voltage Matrix
control application for Wind turbine generator.
Project grade: Excellent (GPA: 3.8)
Supervision by: Prof. Dr./ Mahmoud Abdel Hamid and Prof. Dr./Mohamed Abdel Aziz.
Post Graduate Education:
# Technical Engineer assistant for Master thesis of “Power quality problems in distribution system” at
Ain Shams university under supervision of Dr../Rizk Hamouda
Work Experience
November 2014 – Till date Sr. Tender/Project Engineer in High Voltage Substation.
At ALGIHAZ Holding Company - KSA
May 2010 – November 2014 Tender Engineer
(4 Years)
At Egyptian German Electrical Manufacturing Company (EGEMAC) –
Egypt
September 2009 - May 2010 Electrical Design Engineer
(8 Months)
At Global Power System (GPS) - Egypt
Key Skills:
• Study and analyses project technical specification.
• Prepare Technical Inquiries for MV SWGER, LV panels, Control and Protection Panels.
1

2. • Check and review the schematic drawing and ensure that all the required function (protection, control)
achieved
• Current Transformer Calculation, Battery Sizing and Auxiliary Transformer Sizing.
• Prepare the pre bid clarification.
• Prepare the Bill of Quantity and perform the calculation estimation.
• Review the technical offers from vendors.
• Power System analysis using Simulink
• Attend FAT test for CT, PT, and MV SWGER.
• Short Circuit Calculation using Per unit System.
Work Profile
Responsibilities as Sr. Tender/Design Engineer in High Voltage Substation in ALGIHAZ Holding Co.:
• Responsible for Substation projects, ARAMCO projects, HV Cable Transmission projects and
any RENWABLE Energy projects.
• Study the Tender Documents and Technical Specification.
• Prepare the Pre Bid clarifications
• Prepare the BOQ.
• Send RFQ's to suppliers and review the Technical proposal and insuring that it comply with
SEC requirements and specification.
• Prepare the estimation calculation and calculate bid bond value.
• Main projects I have been involved in preparing its technical and commercial offer:
- SEC
DAHRAN 115/13.8KV SS.
Sari, Naseem and MPS power Cable inter-connection
10MW ALMIDRA PV farm North Park
- ARAMCO
10.5MW ALMIDRA PV farm North Park
5MW Gas well PV farm
Responsibilities as Tender Engineer in High Voltage Substation in Egyptian German
Electrical Manufacturing Co. (EGEMAC):
• Technical studies for
- 66KV switchgear.
- 66/11 KV Air insulated substation “Turn Key”
- Main and Backup Protection system for 66KV system.
- Main Protection system for 66/11 KV Power Transformer.
- Control, measuring and communication systems for 66KV substation.
• Preparation of technical and commercial offer.
• Main projects I have been involved in preparing its technical and commercial offer:
2

3. - Egypt Electricity Transmission Company
East Delta Electricity Production Company
Manfalout 66/11KV Air insulated substation “indoor” (3X40MVA Power Transformer).
- Private Sector companies.
AL Tajamouat Investment Company.
El-Tagamouat 66/11KV Air insulated substation “indoor” (2X40MVA Power Transformer).
Responsibilities as Electrical Engineer in Egyptian German Electrical Manufacturing Co.
(EGEMAC):
• Technical studies for
- Medium voltage switchgear.
- Package substations (Kiosks) for transformers up to 1500 KVA
- Low voltage Capacitor banks
- Low voltage switchgear
• Preparation of technical and commercial offer.
• Having excellent knowledge in designing wiring and control circuits.
• Main projects I have been involved in preparing its technical and commercial offer:
- Egypt Electricity Production Company
East Delta Electricity Production Company
Suez Thermal Power Plant (1X650MW) Gas/Oil Fired Unit
- Projects of the Egyptian electricity distribution companies.
South Cairo Electricity Distribution Company.
1X16 Cell Medium voltage switchgear 12KV.
North Cairo Electricity Distribution Company.
50 Package substations for transformers 1000 KVA, 12KV.
• Projects of the Ministry of Housing and Urban Communities
Electrical networks project for the new city of Assiut
1X19 Cell Medium voltage switchgear 22KV (+)87 Package substations for transformers 500
KVA, 22KV.
Electrical networks project for the El-Sadat city
1X27 Cell Medium voltage switchgear 12KV (+)2 Package substations for transformers 1000
KVA, 12KV.
Electrical networks project for the Industrial zone in 10th of RAMDAN.
4X21 Cell Medium voltage switchgear 12KV (+)10 Package substations for transformers 500
KVA, 12KV.
Responsibilities as an Electrical Design Engineer in Global Power System (GPS):
3

4. • Sites load Survey 'Power flow Study'.
• Carry out power factor improvements for industrial factories.
• Design Power Factor Panels using Autcad.
• Allocate the power factor correction panel in the site.
• Main Industrial factories I have been involved in:
Edita For Food Industry Install (1X50KVAR) fixed capacitor bank as a back up
Flora - Pyramids Paper Mills Install (1X25KVAR) fixed capacitor bank (+)(5X20) Variable capacitor
Units
Training Courses:
Bicom Academy Training Center
Type of Training: PMP
Duration: 10 Sessions
Certificate: A
Mutaheda Training Center
Type of Training: Primavera 6
Duration: 22 days
Certificate: A
THE AMERICAN UNIVERSITY IN CAIRO
Duration: 1 month 20 days - (From 4 March 2012 To 23 April 2012 )Type of Training: Level 313
Certificate: A-
Computer Knowledge
• Matlab (Electrical Software).
• Microsoft Office (Word, Excel, PowerPoint).
• AutoCAD 2D
Language skills:
• Arabic: Mother tongue.
• English: Intermediate. (Writing, Reading and conversational)
Personal Details
Nationality : Egyptian
Sex : Male
Marital Status : Married
Driving License : Egypt / Gulf Area
Date of Birth : 05/9/1986
Job Reference
Available upon request
4