This document summarizes a study on the effect of infill wall stiffness variations on the behavior of reinforced concrete buildings under seismic demands. The study models a 5-story reinforced concrete building located in seismic zone III of Nasik City, India, with and without considering the stiffness of infill walls. Static analysis using the equivalent lateral force method and dynamic analysis using the response spectrum method are performed and results such as base shear, fundamental time period, and story shear are compared. The goal is to better understand how accounting for the stiffness of infill walls affects the performance of reinforced concrete buildings during earthquakes.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Performance Levels of RC Structures by Non-Linear Pushover AnalysisIJERA Editor
In the recent earthquakes in which many concrete structures have been severely damaged or collapsed, have indicated the need for evaluating the seismic adequacy of existing buildings. About 60% of the land area of our country is susceptible to damaging levels of seismic hazard. We can’t avoid future earthquakes, but preparedness and safe building construction practices can certainly reduce the extent of damage and loss. In order to strengthen and resist the buildings for future earthquakes, the behavior of a building during earthquakes depends critically on its overall shape, size and geometry. The nonlinear pushover analysis is becoming a popular tool for seismic performance evaluation of existing and new structures. The weak zones in the structure can be examined by conducting this push over analysis and then it will be decided whether the particular part is to be retrofitted or rehabilitated according to the requirement. This method determines the base shear capacity of the building and performance levels of each part of building under varying intensity of seismic force. The results of effects of different plan on seismic response of buildings have been presented in terms of displacement, base shear and plastic hinge pattern
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Static Analysis of G+2 Institutional Building in BhopalIJERA Editor
A Seismic design is aimed at controlling the structural damage based on precise estimations of proper response
parameters. Seismic design explicitly evaluates how a building is likely to perform; given the potential hazard it
is likely to experience, considering uncertainties inherent in the quantification of potential hazard and
uncertainties in assessment of the actual building response. It is an interactive process that begins with the
selection of performance objectives, followed by the development of a preliminary design, an assessment as to
whether or not the design meets the performance objectives, and finally redesign and reassessment, if required,
until the desired performance level is achieved.
In this present study one R.C. buildings, of G + 2 storey institutional building (designed according to IS
456:2000) are analysed. Analysis and redesigning by changing the main reinforcement of various frame
elements and again analyzing. The structural analysis has been carried out using STAAD.Pro V8i, a product of
Structural Analysis and Design Program. A total of 1 cases for a particular G + 2 storey institutional building
located in Zone-II have been analyzed. The results of analysis are compared in terms of reinforcement in the
column and beam. The best possible combination of reinforcement that is economical, effective and whose
damage is limited to Grade 2 (slight structural damage, moderate non structural damage) in order to enable
Immediate Occupancy is determined and is termed as Seismic Design.
Comparative study of Performance of RCC Multi-Storey Building for Koyna and B...IJERA Editor
The recent history of earthquakes have indicated that if the structures are not properly designed and constructed with required quality may cause great damage to structures. This fact has resulted in to ensure safety against earthquake forces of tall structures hence, there is need to determine seismic responses of such building for designing earthquake resistant structures by carrying seismic analysis of structure. In the present work dynamic analysis of G+12 RC multi-storied framed building considering for Koyna and Bhuj earthquake is carried out by response spectrum analysis and time history analysis and responses of such building are comparatively studied with the help of SAP2000 software. Two time histories (i.e. koyna and Bhuj) have been used to develop different acceptable criteria (base shear, storey displacement, storey drift). From the results it is recommended that time history analysis should be performed as it predicts the structural response more accurately than the response spectrum analysis. Pushover Analysis is also performed for the same building and from results it is found that building is seismically safe.
Seismic analysis of vertical irregular multistoried buildingeSAT Journals
Abstract It is understood that buildings which are regular in elevation (regular building) perform much better than those which have irregularity in elevation (irregular building) under seismic loading. Irregularities are not avoidable in construction of buildings. However a detailed study to understand structural behaviour of the buildings with irregularities under seismic loading is essential for appropriate design and their better performance. The main objective of this study is to understand the effect of elevation irregularity and behaviour of 3-D R.C. Building which is subjected to earthquake load. In the present study, a 5 bays X 5 bays, 16 storied structure with provision of lift core walls and each storey height 3.2 m, having irregularity in elevation, is considered as the soft storey 3-D structure. An Irregular building is assumed to be located in all zones. Linear dynamic analysis using Response Spectrum method of the irregular building is carried out using the standard and convenient FE software package. To quantify the effect of different degrees of irregularities all the structures are analysed. In addition, the analysis carried out also enables to understand the behaviour that takes place in irregular buildings in comparison to that in regular buildings. For this the behaviour parameters considered are 1) Maximum displacement 2) Base shear, 3) Time period. Key Words: asymmetric building, soft story, base shear, displacement, soft storey, time period.
Review paper on seismic responses of multistored rcc building with mass irreg...eSAT Journals
Abstract
From past earthquakes it is proved that many of structure are totally or partially damaged due to earthquake. So, it is necessary to determine seismic responses of such buildings. There are different techniques of seismic analysis of structure. Time history analysis is one of the important techniques for structural seismic analysis generally the evaluated structural response is non-linear in nature. For such type of analysis, a representative earthquake time history is required. In this project work seismic analysis of RCC buildings with mass irregularity at different floor level are carried out. Here for analysis different time histories have been used. This paper highlights the effect of mass irregularity on different floor in RCC buildings with time history and analysis is done by using ETABS software.
Keywords: Seismic Analysis, Time History Analysis, Base Shear, Storey Shear, Story Displacement.
Analysis and Capacity Based Earthquake Resistance Design of Multy Bay Multy S...IJERA Editor
Many reinforced concrete (RC) framed structures located in zones of high seismicity in India are constructed
without considering the seismic code provisions. The vulnerability of inadequately designed structures represents
seismic risk to occupants. The main cause of failure of multi-storey reinforced concrete frames during seismic
motion is the sway mechanism. If the frame is designed on the basis of strong column-weak beam concept the
possibilities of collapse due to sway mechanisms can be completely eliminated. In multi storey frame this can be
achieved by allowing the plastic hinges to form, in a predetermined sequence only at the ends of all the beams
while the columns remain essentially in elastic stage and by avoiding shear mode of failures in columns and
beams. This procedure for design is known as Capacity based design which would be the future design
philosophy for earthquake resistant design of multi storey reinforced concrete frames. Model of multi bay multi
storied residential building study were done using the software program ETAB2015 and were analyzed using
non-linear static pushover analysis
Performance Levels of RC Structures by Non-Linear Pushover AnalysisIJERA Editor
In the recent earthquakes in which many concrete structures have been severely damaged or collapsed, have indicated the need for evaluating the seismic adequacy of existing buildings. About 60% of the land area of our country is susceptible to damaging levels of seismic hazard. We can’t avoid future earthquakes, but preparedness and safe building construction practices can certainly reduce the extent of damage and loss. In order to strengthen and resist the buildings for future earthquakes, the behavior of a building during earthquakes depends critically on its overall shape, size and geometry. The nonlinear pushover analysis is becoming a popular tool for seismic performance evaluation of existing and new structures. The weak zones in the structure can be examined by conducting this push over analysis and then it will be decided whether the particular part is to be retrofitted or rehabilitated according to the requirement. This method determines the base shear capacity of the building and performance levels of each part of building under varying intensity of seismic force. The results of effects of different plan on seismic response of buildings have been presented in terms of displacement, base shear and plastic hinge pattern
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Static Analysis of G+2 Institutional Building in BhopalIJERA Editor
A Seismic design is aimed at controlling the structural damage based on precise estimations of proper response
parameters. Seismic design explicitly evaluates how a building is likely to perform; given the potential hazard it
is likely to experience, considering uncertainties inherent in the quantification of potential hazard and
uncertainties in assessment of the actual building response. It is an interactive process that begins with the
selection of performance objectives, followed by the development of a preliminary design, an assessment as to
whether or not the design meets the performance objectives, and finally redesign and reassessment, if required,
until the desired performance level is achieved.
In this present study one R.C. buildings, of G + 2 storey institutional building (designed according to IS
456:2000) are analysed. Analysis and redesigning by changing the main reinforcement of various frame
elements and again analyzing. The structural analysis has been carried out using STAAD.Pro V8i, a product of
Structural Analysis and Design Program. A total of 1 cases for a particular G + 2 storey institutional building
located in Zone-II have been analyzed. The results of analysis are compared in terms of reinforcement in the
column and beam. The best possible combination of reinforcement that is economical, effective and whose
damage is limited to Grade 2 (slight structural damage, moderate non structural damage) in order to enable
Immediate Occupancy is determined and is termed as Seismic Design.
Comparative study of Performance of RCC Multi-Storey Building for Koyna and B...IJERA Editor
The recent history of earthquakes have indicated that if the structures are not properly designed and constructed with required quality may cause great damage to structures. This fact has resulted in to ensure safety against earthquake forces of tall structures hence, there is need to determine seismic responses of such building for designing earthquake resistant structures by carrying seismic analysis of structure. In the present work dynamic analysis of G+12 RC multi-storied framed building considering for Koyna and Bhuj earthquake is carried out by response spectrum analysis and time history analysis and responses of such building are comparatively studied with the help of SAP2000 software. Two time histories (i.e. koyna and Bhuj) have been used to develop different acceptable criteria (base shear, storey displacement, storey drift). From the results it is recommended that time history analysis should be performed as it predicts the structural response more accurately than the response spectrum analysis. Pushover Analysis is also performed for the same building and from results it is found that building is seismically safe.
Seismic analysis of vertical irregular multistoried buildingeSAT Journals
Abstract It is understood that buildings which are regular in elevation (regular building) perform much better than those which have irregularity in elevation (irregular building) under seismic loading. Irregularities are not avoidable in construction of buildings. However a detailed study to understand structural behaviour of the buildings with irregularities under seismic loading is essential for appropriate design and their better performance. The main objective of this study is to understand the effect of elevation irregularity and behaviour of 3-D R.C. Building which is subjected to earthquake load. In the present study, a 5 bays X 5 bays, 16 storied structure with provision of lift core walls and each storey height 3.2 m, having irregularity in elevation, is considered as the soft storey 3-D structure. An Irregular building is assumed to be located in all zones. Linear dynamic analysis using Response Spectrum method of the irregular building is carried out using the standard and convenient FE software package. To quantify the effect of different degrees of irregularities all the structures are analysed. In addition, the analysis carried out also enables to understand the behaviour that takes place in irregular buildings in comparison to that in regular buildings. For this the behaviour parameters considered are 1) Maximum displacement 2) Base shear, 3) Time period. Key Words: asymmetric building, soft story, base shear, displacement, soft storey, time period.
Review paper on seismic responses of multistored rcc building with mass irreg...eSAT Journals
Abstract
From past earthquakes it is proved that many of structure are totally or partially damaged due to earthquake. So, it is necessary to determine seismic responses of such buildings. There are different techniques of seismic analysis of structure. Time history analysis is one of the important techniques for structural seismic analysis generally the evaluated structural response is non-linear in nature. For such type of analysis, a representative earthquake time history is required. In this project work seismic analysis of RCC buildings with mass irregularity at different floor level are carried out. Here for analysis different time histories have been used. This paper highlights the effect of mass irregularity on different floor in RCC buildings with time history and analysis is done by using ETABS software.
Keywords: Seismic Analysis, Time History Analysis, Base Shear, Storey Shear, Story Displacement.
Analysis and Capacity Based Earthquake Resistance Design of Multy Bay Multy S...IJERA Editor
Many reinforced concrete (RC) framed structures located in zones of high seismicity in India are constructed
without considering the seismic code provisions. The vulnerability of inadequately designed structures represents
seismic risk to occupants. The main cause of failure of multi-storey reinforced concrete frames during seismic
motion is the sway mechanism. If the frame is designed on the basis of strong column-weak beam concept the
possibilities of collapse due to sway mechanisms can be completely eliminated. In multi storey frame this can be
achieved by allowing the plastic hinges to form, in a predetermined sequence only at the ends of all the beams
while the columns remain essentially in elastic stage and by avoiding shear mode of failures in columns and
beams. This procedure for design is known as Capacity based design which would be the future design
philosophy for earthquake resistant design of multi storey reinforced concrete frames. Model of multi bay multi
storied residential building study were done using the software program ETAB2015 and were analyzed using
non-linear static pushover analysis
Dynamic Analysis of Multi-Storeyed Frame-Shear Wall Building Considering SSIIJERA Editor
The structural system of a high-rise building often has a more pronounced effect than a low rise building on the
total building cost and the architecture aspect of building. Shear walls are lateral load resisting structural
systems which provide stability to structures from lateral loads like wind and seismic Loads. The design of multi
storey building is to have good lateral load resisting System along with gravity load system for safety of
occupant and for better performance of structure even in most adverse condition. The main scope of this project
is to apply class room knowledge in the real world by designing a multi-storied residential building. Shear walls
are more efficient in resisting lateral loads in multi storied buildings. Steel and reinforced concrete shear walls
are kept in major positions of multi storied buildings which are made in consideration of seismic forces and
wind forces. To solve this purpose shear walls are a very powerful structural elements, if used judiciously can
reduce deflections and stresses to a very great extent. Our project contains a brief description of building with
shear wall and without shear wall thoroughly discussed structural analysis of a building to explain the
application of shear wall. The design analysis of the multi storied building in our project is done through
STAAD-PRO, most popular structural engineering software. It is featured with some ultimate power tool,
analysis and design facilities which make it more users friendly.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad