IGCSE 11.3.2
•
1 like•840 views
All metals have low numbers of electrons in their outermost shells and need to lose electrons to achieve a full outer shell. Some metals lose electrons more easily than others and can be ordered in a reactivity series based on their tendency to lose electrons. Metals higher in the reactivity series are very reactive as they readily lose electrons, while metals lower in the series are less reactive and do not like to lose electrons.
Report
Share
Report
Share
Download to read offline
Recommended
The periodic table and identification of ions
The document summarizes key concepts about the periodic table, identification of ions and gases. It describes trends in properties for groups I and VII, such as how reactivity increases down group I due to electron shielding. Tests are outlined to identify aqueous cations, anions and common gases. Uses of transition metals and noble gases are briefly mentioned.
From Stone to Mystic Metal
This document traces the discovery and development of metals from the Stone Age to the Bronze and Iron Ages. It discusses how early humans first encountered native metals like copper, gold, and silver in their pure metallic form. It then explains how ores containing metals were discovered and the realization that they could be smelted using charcoal or coke to extract the pure metal. A key development was realizing ores could be converted to metal by heating with charcoal, allowing efficient extraction of metals like copper and the beginning of the Bronze Age. The document also briefly discusses alloys like bronze and reactivity series in extracting different metals.
C10 syllabus statements
This document outlines the syllabus for a unit on metals and their properties and uses. It covers distinguishing metals from non-metals, interpreting diagrams of metal alloys, explaining the reactivity series of metals and how it relates to extracting metals from ores. Specific metals discussed include potassium, sodium, calcium, magnesium, zinc, iron, hydrogen, copper and aluminium. The uses of different metals like aluminium in aircraft and food containers, and zinc for galvanizing steel are also addressed.
2p9 metals and acids 121110
This document discusses metals reacting with acids to form salts and hydrogen gas. The key points are:
1) Metals react with acids according to the general equation: Metal + Acid → Salt + Hydrogen.
2) Salts have the metal as the first name and acid as the last name, such as magnesium chloride from magnesium and hydrochloric acid.
3) Copper is less reactive than magnesium and zinc based on experiments showing these metals reacting with hydrochloric and sulfuric acids to form salts and hydrogen while copper did not react.
Non-Ferrous Metals
The document discusses several metals that are important for industrial use: copper, lead, zinc, mercury, magnesium, and titanium. Copper has been used for thousands of years in bronze and brass production. Lead and zinc often occur together in the same ore veins, with Russia and Australia being major producers. Mercury is the only metal found in liquid form naturally, with the Philippines having deposits of the mercury-containing mineral cinnabar. Magnesium and titanium are both light but strong metals used in industrial applications like aluminum. Gold and silver are also found in the Philippines in placer deposits or as flakes and nuggets.
Metals and acids ok1294990932
The document describes displacement reactions between metals and metal ion solutions. More reactive metals can displace less reactive metals from their solutions. For example, magnesium displaces iron from iron(II) nitrate, forming magnesium nitrate and iron. Magnesium is more reactive than iron. Lead also displaces copper from copper(II) sulphate, forming lead(II) sulphate and copper, as lead is more reactive than copper. However, copper does not displace lead, as copper is not more reactive than lead.
Chapter 12 Redox Reaction
1. Redox reactions involve the transfer of electrons between oxidizing and reducing agents, resulting in a change in oxidation state.
2. Rusting of iron is a redox reaction where iron is oxidized by oxygen, releasing electrons. Water and oxygen gain electrons to form hydroxide ions.
3. When iron is in contact with more electropositive metals like magnesium or zinc, rusting is inhibited as the more reactive metal undergoes oxidation instead of the iron. Contact with less electropositive metals like copper or tin accelerates rusting as iron is more easily oxidized.
Lab #5 lab sample
The document describes a lab experiment comparing the reactions of different metals with hydrochloric acid. Students observed the reactions of zinc, magnesium, copper, and aluminum with HCl of varying concentrations. Zinc and magnesium reacted vigorously while copper did not react at all. The purpose was to model oxidation-reduction reactions and construct equations to summarize the single replacement reactions. Students analyzed the reactions in terms of atoms becoming ions, oxidation states changing, and the energy changes involved. Reactions that produced heat were determined to be exothermic.
Recommended
The periodic table and identification of ions
The document summarizes key concepts about the periodic table, identification of ions and gases. It describes trends in properties for groups I and VII, such as how reactivity increases down group I due to electron shielding. Tests are outlined to identify aqueous cations, anions and common gases. Uses of transition metals and noble gases are briefly mentioned.
From Stone to Mystic Metal
This document traces the discovery and development of metals from the Stone Age to the Bronze and Iron Ages. It discusses how early humans first encountered native metals like copper, gold, and silver in their pure metallic form. It then explains how ores containing metals were discovered and the realization that they could be smelted using charcoal or coke to extract the pure metal. A key development was realizing ores could be converted to metal by heating with charcoal, allowing efficient extraction of metals like copper and the beginning of the Bronze Age. The document also briefly discusses alloys like bronze and reactivity series in extracting different metals.
C10 syllabus statements
This document outlines the syllabus for a unit on metals and their properties and uses. It covers distinguishing metals from non-metals, interpreting diagrams of metal alloys, explaining the reactivity series of metals and how it relates to extracting metals from ores. Specific metals discussed include potassium, sodium, calcium, magnesium, zinc, iron, hydrogen, copper and aluminium. The uses of different metals like aluminium in aircraft and food containers, and zinc for galvanizing steel are also addressed.
2p9 metals and acids 121110
This document discusses metals reacting with acids to form salts and hydrogen gas. The key points are:
1) Metals react with acids according to the general equation: Metal + Acid → Salt + Hydrogen.
2) Salts have the metal as the first name and acid as the last name, such as magnesium chloride from magnesium and hydrochloric acid.
3) Copper is less reactive than magnesium and zinc based on experiments showing these metals reacting with hydrochloric and sulfuric acids to form salts and hydrogen while copper did not react.
Non-Ferrous Metals
The document discusses several metals that are important for industrial use: copper, lead, zinc, mercury, magnesium, and titanium. Copper has been used for thousands of years in bronze and brass production. Lead and zinc often occur together in the same ore veins, with Russia and Australia being major producers. Mercury is the only metal found in liquid form naturally, with the Philippines having deposits of the mercury-containing mineral cinnabar. Magnesium and titanium are both light but strong metals used in industrial applications like aluminum. Gold and silver are also found in the Philippines in placer deposits or as flakes and nuggets.
Metals and acids ok1294990932
The document describes displacement reactions between metals and metal ion solutions. More reactive metals can displace less reactive metals from their solutions. For example, magnesium displaces iron from iron(II) nitrate, forming magnesium nitrate and iron. Magnesium is more reactive than iron. Lead also displaces copper from copper(II) sulphate, forming lead(II) sulphate and copper, as lead is more reactive than copper. However, copper does not displace lead, as copper is not more reactive than lead.
Chapter 12 Redox Reaction
1. Redox reactions involve the transfer of electrons between oxidizing and reducing agents, resulting in a change in oxidation state.
2. Rusting of iron is a redox reaction where iron is oxidized by oxygen, releasing electrons. Water and oxygen gain electrons to form hydroxide ions.
3. When iron is in contact with more electropositive metals like magnesium or zinc, rusting is inhibited as the more reactive metal undergoes oxidation instead of the iron. Contact with less electropositive metals like copper or tin accelerates rusting as iron is more easily oxidized.
Lab #5 lab sample
The document describes a lab experiment comparing the reactions of different metals with hydrochloric acid. Students observed the reactions of zinc, magnesium, copper, and aluminum with HCl of varying concentrations. Zinc and magnesium reacted vigorously while copper did not react at all. The purpose was to model oxidation-reduction reactions and construct equations to summarize the single replacement reactions. Students analyzed the reactions in terms of atoms becoming ions, oxidation states changing, and the energy changes involved. Reactions that produced heat were determined to be exothermic.
Metals. Chemistry
Metals have a giant metallic lattice structure formed from positive metal ions bonded together by delocalized electrons. This metallic bonding gives rise to several key properties: high melting and boiling points due to the strong electrostatic attraction between ions and electrons; good electrical conductivity since electrons are free to move throughout the structure; and malleability and ductility because the movable electrons allow the structure to deform under pressure or force. Most metals are found in the first three groups of the periodic table, where elements have similar metallic properties, though the metal-nonmetal transition occurs further right as you progress down each period.
IGCSE Electricity
The document provides information about electrolysis, including:
1) Electrolysis is the chemical effect of electricity on ionic compounds, causing them to break up into simpler substances like elements.
2) During electrolysis, ions move to electrodes of opposite charge where chemical reactions occur - non-metals form at the anode and metals or hydrogen form at the cathode.
3) Examples of electrolysis include molten lead(II) bromide producing lead at the cathode and bromine at the anode, and aqueous copper(II) chloride producing copper at the cathode and chlorine at the anode.
AQA Core Science C1.3 metals and their uses
Metals are useful in everyday life but must be extracted from metal ores through mining. Ores like iron ore and bauxite are the natural sources of metals like iron and aluminum. Extracting metals involves removing the metal from the ore through chemical or electrolytic processes. Some metals are more reactive than others based on their placement in the reactivity series, determining which metals can displace others from their compounds and oxides. Metals have several distinctive physical properties including being solid, malleable, ductile, and good conductors of heat and electricity.
Chy1 spring tracking2
A metal ore contains metal oxides from which it is economically viable to extract metal. Most common extraction methods are reduction reactions, which remove oxygen from metal oxides, or electrolysis for highly reactive metals above carbon in the reactivity series. Less reactive metals below carbon in the reactivity series can be extracted through heating with carbon in a blast furnace via displacement reactions.
Properties Of Metals
Metals are strong, shiny, good conductors of heat and electricity, can be shaped into wires, make a ringing sound when struck, and some are magnetic. Non-metals do not share these properties and are generally less reactive than metals. The document sorts common elements into metals and non-metals based on their properties and reactivity, with lithium, sodium, and potassium being the most reactive metals with water.
Chemistry review c10 c14
1. The document discusses various properties and reactions involving metals and non-metals. It describes the structure of alloys and how they are stronger than pure metals.
2. Key extraction methods are related to a metal's position in the reactivity series, such as electrolysis of reactive metals and blast furnaces for less reactive metals.
3. Common uses of metals such as aluminum, zinc, and iron alloys are explained in terms of the metals' properties including strength, corrosion resistance, and galvanization.
Chapter 6 electtrochemistry
1. The document discusses factors that affect electrolysis and applications of electrolysis such as electroplating, purification, and extracting reactive metals.
2. It also discusses how electrochemistry concepts are based on tendencies of metals to release electrons and displace other metals from salt solutions through displacement reactions.
3. Two electrochemical cells, P and Q, are compared and contrasted. Cell P involves copper electrodes in copper sulfate and undergoes a chemical to electrical conversion, while Cell Q involves copper and lead electrodes and undergoes an electrical to chemical conversion.
4s4 electrolysis( Part 1)
The document discusses key concepts in electrochemistry including electrolytes, conductors, electrolysis, and cations and anions. It defines an electrolyte as a substance that can conduct electricity due to the presence of freely moving ions. Conductors are able to conduct electricity but do not undergo chemical reactions. Electrolysis is the process of using a direct electric current to drive nonspontaneous chemical reactions through an electrolyte. During electrolysis, cations migrate to the cathode and anions migrate to the anode.
physical properties of metals
Metals have many physical properties including malleability, ductility, hardness, metallic lustre, thermal conductivity, and electrical conductivity. Gold is the most malleable metal and can be beaten into sheets with an area of 6.7 square feet from just 1 gram of gold. Platinum is the most ductile metal and 1 gram can be drawn into a wire over 2km in length. Metals such as silver conduct heat and electricity well, making them useful for applications like electrical wires and cooking utensils.
Grade 4 unit 1 lesson 3
1. The document discusses the properties and classification of elements as metals and non-metals. It describes experiments showing that metals conduct heat and electricity well, are malleable, and have high melting points, while non-metals are poor conductors and have low melting points.
2. Metals discussed include iron, copper, aluminum, gold, and silver. Non-metals include carbon, sulfur, and oxygen. Common uses of metals mentioned are making bridges, wires, coins, pots, and jewelry. Carbon is used in batteries.
3. The document provides a table comparing key properties of metals and non-metals and exercises to classify materials and understand their properties and uses.
C19 metals and their reactivity
This chapter discusses the physical and chemical properties of metals. Metals are usually hard, shiny, malleable and ductile. They are good conductors of heat and electricity. Chemically, metals form positive ions and react with acids, oxygen, water and steam to form salts and release hydrogen gas. The reactivity of metals can be predicted based on their reactivity series, with more reactive metals displacing less reactive ones from their compounds. Alloys are stronger than pure metals due to disrupted atomic layers.
C19 metals and their reactivity
This document discusses the properties and reactivity of metals. It begins by describing the physical properties of metals, such as their hardness, malleability, conductivity and high melting points. It then discusses the chemical properties of metals, explaining how they form positive ions and react with oxygen, water and acids. Key points covered include the structure of pure metals and alloys, the reactivity series, and how the reactivity of metals relates to their tendency to form ions. Reactions of specific metals like magnesium, sodium and calcium are described. The document also addresses the passivating effect of metal oxides like aluminum oxide.
C19 metals and their reactivity
This document is a chapter from a textbook on metals and their reactivity. It discusses the physical and chemical properties of metals, including their structure and properties of alloys. It introduces the reactivity series of metals and how their reactivity relates to their tendency to form ions. The chapter describes displacement reactions between metals and explains how the reactivity series can be used to predict these reactions. It also discusses the reduction of metal oxides by carbon and hydrogen as well as the thermal stability of different metal compounds. In summary, the chapter provides an overview of metals and uses the reactivity series to explain and predict their chemical behaviors.
Metals
The document provides information about grade 10 IGCSE chemistry content related to properties and reactions of metals. It discusses distinguishing metals from non-metals, reactivity series, extraction of metals like iron from ores, and uses of metals such as aluminum and zinc. It also describes physical and chemical properties of metals, structure and properties of alloys, and reactions of metals with water, steam, and acids to determine reactivity order.
Metals and their Reactivity
This document discusses the properties and reactivity of metals. It begins by describing the physical properties of metals, such as their hardness, malleability and conductivity. It then discusses the chemical properties of metals, including how they form positive ions and react with oxygen, water and acids. The document introduces metal alloys and explains why they are stronger than pure metals. It also defines the reactivity series and uses it to predict and describe the reactions of different metals. The document discusses the reactions of various metal compounds and how the position of metals in the reactivity series affects their reactivity and the stability of their compounds.
Form 3 Science Chapter 4 Reactivity of Metals
The document discusses the variety of minerals found in the Earth's crust, including both natural elements like gold and silver as well as natural compounds like bauxite and magnetite. It also covers the reactivity series of metals and how more reactive metals must be extracted from their ores using methods like heating with carbon or electrolysis, while less reactive metals can be found in purer form. A variety of everyday uses for common minerals are presented, along with the environmental impacts that can result from mining activities.
Core & Extension Metals I Reactivity Series & Redox.pptx
1. The document discusses the reactivity series of metals and how to determine the order of reactivity. It describes experiments where metals are tested for reactivity by reaction with water, acids, and carbon.
2. Based on the experiments, potassium is the most reactive metal, followed by sodium, lithium, calcium, magnesium, zinc, iron, and copper in decreasing reactivity. Carbon is placed between aluminum and zinc in the reactivity series.
3. Aluminum appears less reactive in the series due to the formation of a protective oxide layer. This layer prevents further reaction, unlike the soft oxide layers of less reactive metals.
Lesson 10 uses of metals and extraction
The document discusses extracting metals from ores and their uses. It explains that more reactive metals can displace less reactive metals in solutions and that carbon can be used to extract some metals by reducing metal oxides to metals. Examples are given of extracting lead through heating lead oxide with carbon to produce lead and carbon dioxide. The extraction of iron in a blast furnace is also summarized. Finally, common uses of extracted metals like gold, aluminum, steel, and copper are listed.
Reactivity with metals
The document discusses the reactivity and reactions of various metals, including:
- Metals react with oxygen to form metal oxides, and this reaction can be sped up by burning the metal.
- Metals react with water and acids to form metal hydroxides/oxides or salts and release hydrogen gas.
- More reactive metals can displace less reactive metals from compounds in a displacement reaction.
- Metals are extracted from their ores using electrolysis or heating with carbon in a blast furnace.
Patterns Of Reactivity
The document discusses the reactivity and extraction of various metals. It introduces the reactivity series, which ranks metals based on their reactivity with oxygen, acids, and water. More reactive metals are higher in the series and displace less reactive ones. Extraction methods depend on reactivity - less reactive metals like copper can be extracted by heating their ores with carbon, while very reactive metals require electrolysis.
Metals
This is a summary of the topic "metals" in the GCE O levels subject: Chemistry. Students taking either the combined science (chemistry/physics) or pure chemistry will find this useful. These slides are prepared according to the learning outcomes required by the examinations board.
Basic of Corrosion
Corrosion is the deterioration of materials through chemical reactions with their environment. It occurs via electrochemical processes where the metal surface acts as an anode and electrons flow to a cathode. Factors like material properties, environment, temperature affect corrosion. Corrosion causes economic losses and safety issues. Understanding corrosion mechanisms and factors is important for material selection, design, and prevention of failures in engineering structures.
More Related Content
What's hot
Metals. Chemistry
Metals have a giant metallic lattice structure formed from positive metal ions bonded together by delocalized electrons. This metallic bonding gives rise to several key properties: high melting and boiling points due to the strong electrostatic attraction between ions and electrons; good electrical conductivity since electrons are free to move throughout the structure; and malleability and ductility because the movable electrons allow the structure to deform under pressure or force. Most metals are found in the first three groups of the periodic table, where elements have similar metallic properties, though the metal-nonmetal transition occurs further right as you progress down each period.
IGCSE Electricity
The document provides information about electrolysis, including:
1) Electrolysis is the chemical effect of electricity on ionic compounds, causing them to break up into simpler substances like elements.
2) During electrolysis, ions move to electrodes of opposite charge where chemical reactions occur - non-metals form at the anode and metals or hydrogen form at the cathode.
3) Examples of electrolysis include molten lead(II) bromide producing lead at the cathode and bromine at the anode, and aqueous copper(II) chloride producing copper at the cathode and chlorine at the anode.
AQA Core Science C1.3 metals and their uses
Metals are useful in everyday life but must be extracted from metal ores through mining. Ores like iron ore and bauxite are the natural sources of metals like iron and aluminum. Extracting metals involves removing the metal from the ore through chemical or electrolytic processes. Some metals are more reactive than others based on their placement in the reactivity series, determining which metals can displace others from their compounds and oxides. Metals have several distinctive physical properties including being solid, malleable, ductile, and good conductors of heat and electricity.
Chy1 spring tracking2
A metal ore contains metal oxides from which it is economically viable to extract metal. Most common extraction methods are reduction reactions, which remove oxygen from metal oxides, or electrolysis for highly reactive metals above carbon in the reactivity series. Less reactive metals below carbon in the reactivity series can be extracted through heating with carbon in a blast furnace via displacement reactions.
Properties Of Metals
Metals are strong, shiny, good conductors of heat and electricity, can be shaped into wires, make a ringing sound when struck, and some are magnetic. Non-metals do not share these properties and are generally less reactive than metals. The document sorts common elements into metals and non-metals based on their properties and reactivity, with lithium, sodium, and potassium being the most reactive metals with water.
Chemistry review c10 c14
1. The document discusses various properties and reactions involving metals and non-metals. It describes the structure of alloys and how they are stronger than pure metals.
2. Key extraction methods are related to a metal's position in the reactivity series, such as electrolysis of reactive metals and blast furnaces for less reactive metals.
3. Common uses of metals such as aluminum, zinc, and iron alloys are explained in terms of the metals' properties including strength, corrosion resistance, and galvanization.
Chapter 6 electtrochemistry
1. The document discusses factors that affect electrolysis and applications of electrolysis such as electroplating, purification, and extracting reactive metals.
2. It also discusses how electrochemistry concepts are based on tendencies of metals to release electrons and displace other metals from salt solutions through displacement reactions.
3. Two electrochemical cells, P and Q, are compared and contrasted. Cell P involves copper electrodes in copper sulfate and undergoes a chemical to electrical conversion, while Cell Q involves copper and lead electrodes and undergoes an electrical to chemical conversion.
4s4 electrolysis( Part 1)
The document discusses key concepts in electrochemistry including electrolytes, conductors, electrolysis, and cations and anions. It defines an electrolyte as a substance that can conduct electricity due to the presence of freely moving ions. Conductors are able to conduct electricity but do not undergo chemical reactions. Electrolysis is the process of using a direct electric current to drive nonspontaneous chemical reactions through an electrolyte. During electrolysis, cations migrate to the cathode and anions migrate to the anode.
physical properties of metals
Metals have many physical properties including malleability, ductility, hardness, metallic lustre, thermal conductivity, and electrical conductivity. Gold is the most malleable metal and can be beaten into sheets with an area of 6.7 square feet from just 1 gram of gold. Platinum is the most ductile metal and 1 gram can be drawn into a wire over 2km in length. Metals such as silver conduct heat and electricity well, making them useful for applications like electrical wires and cooking utensils.
Grade 4 unit 1 lesson 3
1. The document discusses the properties and classification of elements as metals and non-metals. It describes experiments showing that metals conduct heat and electricity well, are malleable, and have high melting points, while non-metals are poor conductors and have low melting points.
2. Metals discussed include iron, copper, aluminum, gold, and silver. Non-metals include carbon, sulfur, and oxygen. Common uses of metals mentioned are making bridges, wires, coins, pots, and jewelry. Carbon is used in batteries.
3. The document provides a table comparing key properties of metals and non-metals and exercises to classify materials and understand their properties and uses.
What's hot (10)
Similar to IGCSE 11.3.2
C19 metals and their reactivity
This chapter discusses the physical and chemical properties of metals. Metals are usually hard, shiny, malleable and ductile. They are good conductors of heat and electricity. Chemically, metals form positive ions and react with acids, oxygen, water and steam to form salts and release hydrogen gas. The reactivity of metals can be predicted based on their reactivity series, with more reactive metals displacing less reactive ones from their compounds. Alloys are stronger than pure metals due to disrupted atomic layers.
C19 metals and their reactivity
This document discusses the properties and reactivity of metals. It begins by describing the physical properties of metals, such as their hardness, malleability, conductivity and high melting points. It then discusses the chemical properties of metals, explaining how they form positive ions and react with oxygen, water and acids. Key points covered include the structure of pure metals and alloys, the reactivity series, and how the reactivity of metals relates to their tendency to form ions. Reactions of specific metals like magnesium, sodium and calcium are described. The document also addresses the passivating effect of metal oxides like aluminum oxide.
C19 metals and their reactivity
This document is a chapter from a textbook on metals and their reactivity. It discusses the physical and chemical properties of metals, including their structure and properties of alloys. It introduces the reactivity series of metals and how their reactivity relates to their tendency to form ions. The chapter describes displacement reactions between metals and explains how the reactivity series can be used to predict these reactions. It also discusses the reduction of metal oxides by carbon and hydrogen as well as the thermal stability of different metal compounds. In summary, the chapter provides an overview of metals and uses the reactivity series to explain and predict their chemical behaviors.
Metals
The document provides information about grade 10 IGCSE chemistry content related to properties and reactions of metals. It discusses distinguishing metals from non-metals, reactivity series, extraction of metals like iron from ores, and uses of metals such as aluminum and zinc. It also describes physical and chemical properties of metals, structure and properties of alloys, and reactions of metals with water, steam, and acids to determine reactivity order.
Metals and their Reactivity
This document discusses the properties and reactivity of metals. It begins by describing the physical properties of metals, such as their hardness, malleability and conductivity. It then discusses the chemical properties of metals, including how they form positive ions and react with oxygen, water and acids. The document introduces metal alloys and explains why they are stronger than pure metals. It also defines the reactivity series and uses it to predict and describe the reactions of different metals. The document discusses the reactions of various metal compounds and how the position of metals in the reactivity series affects their reactivity and the stability of their compounds.
Form 3 Science Chapter 4 Reactivity of Metals
The document discusses the variety of minerals found in the Earth's crust, including both natural elements like gold and silver as well as natural compounds like bauxite and magnetite. It also covers the reactivity series of metals and how more reactive metals must be extracted from their ores using methods like heating with carbon or electrolysis, while less reactive metals can be found in purer form. A variety of everyday uses for common minerals are presented, along with the environmental impacts that can result from mining activities.
Core & Extension Metals I Reactivity Series & Redox.pptx
1. The document discusses the reactivity series of metals and how to determine the order of reactivity. It describes experiments where metals are tested for reactivity by reaction with water, acids, and carbon.
2. Based on the experiments, potassium is the most reactive metal, followed by sodium, lithium, calcium, magnesium, zinc, iron, and copper in decreasing reactivity. Carbon is placed between aluminum and zinc in the reactivity series.
3. Aluminum appears less reactive in the series due to the formation of a protective oxide layer. This layer prevents further reaction, unlike the soft oxide layers of less reactive metals.
Lesson 10 uses of metals and extraction
The document discusses extracting metals from ores and their uses. It explains that more reactive metals can displace less reactive metals in solutions and that carbon can be used to extract some metals by reducing metal oxides to metals. Examples are given of extracting lead through heating lead oxide with carbon to produce lead and carbon dioxide. The extraction of iron in a blast furnace is also summarized. Finally, common uses of extracted metals like gold, aluminum, steel, and copper are listed.
Reactivity with metals
The document discusses the reactivity and reactions of various metals, including:
- Metals react with oxygen to form metal oxides, and this reaction can be sped up by burning the metal.
- Metals react with water and acids to form metal hydroxides/oxides or salts and release hydrogen gas.
- More reactive metals can displace less reactive metals from compounds in a displacement reaction.
- Metals are extracted from their ores using electrolysis or heating with carbon in a blast furnace.
Patterns Of Reactivity
The document discusses the reactivity and extraction of various metals. It introduces the reactivity series, which ranks metals based on their reactivity with oxygen, acids, and water. More reactive metals are higher in the series and displace less reactive ones. Extraction methods depend on reactivity - less reactive metals like copper can be extracted by heating their ores with carbon, while very reactive metals require electrolysis.
Metals
This is a summary of the topic "metals" in the GCE O levels subject: Chemistry. Students taking either the combined science (chemistry/physics) or pure chemistry will find this useful. These slides are prepared according to the learning outcomes required by the examinations board.
Basic of Corrosion
Corrosion is the deterioration of materials through chemical reactions with their environment. It occurs via electrochemical processes where the metal surface acts as an anode and electrons flow to a cathode. Factors like material properties, environment, temperature affect corrosion. Corrosion causes economic losses and safety issues. Understanding corrosion mechanisms and factors is important for material selection, design, and prevention of failures in engineering structures.
Science METAL AND NON METAL
This document discusses the properties and chemical reactions of metals and non-metals. It defines metals as solid materials that form metallic bonds between closely packed atoms. Metals have properties like lustre, malleability, and conductivity. Non-metals lack metallic properties and form many useful compounds. The document outlines common chemical reactions of metals, such as forming oxides with oxygen or salts with acids, and reactions of non-metals like combining with oxygen to form oxides or chlorine to form chlorides. In conclusion, it thanks the reader for their time.
Land and its resources
The document discusses minerals found in the Earth's crust including metals like gold and silver as well as natural compounds such as oxides, carbonates, and sulphides. It describes properties of minerals such as hardness as measured by Mohs scale, solubility in water, and how they are affected by heat. Key mineral compounds mentioned are hematite, cassiterite, calcite, malachite, iron pyrite, and galena; and how minerals like metal sulphides and carbonates decompose when heated.
Redox part 3= rusting - reactivity series and diff between electrolytic cell...
questions and answers on redox reactions for rusting, reactivity series and diff between electrolytic cell and electrolysis
Metals and non metals class 10 th
In this ppt everything is available in a sequence and in a very easy way.... It will be very useful to you for your board exams ...
Many ppt also will be available very soon
Metal-and-Non-metal-10 BEST FOR CBSE STUDENTS.pptx
This document discusses the physical and chemical properties of metals and non-metals. It describes how metals are generally solid, malleable, good conductors of heat and electricity, and react with oxygen, water, and acids. Non-metals can be solid, liquid, or gas, are not malleable, conduct heat and electricity poorly, and do not react the same as metals. The reactivity of different metals is explained through the activity series. Common extraction methods include concentration, reduction, and refining. Corrosion and prevention methods are also outlined.
8th
This document discusses the physical properties and reactions of metals and non-metals. Metals are solid, malleable, and good conductors of heat and electricity, while non-metals can be solid, liquid, or gas and are not malleable. Metals react differently with oxygen, water, and metal salt solutions depending on their reactivity. Most metals are found naturally as ores and must be extracted from impurities. Corrosion of metals can be prevented through various coatings and by forming alloys.
NCERT Chapter- 3 Metals & Non-metals pdf
Metals and Non-Metals form a fundamental classification of elements, playing a pivotal role in understanding the diverse world of chemistry. In Class 10, students delve into the distinct characteristics, properties, and reactions that define these two broad categories. Metals, with their conductivity and malleability, stand in stark contrast to the non-metals, which exhibit varying physical and chemical traits. These notes provide a concise exploration of the essential attributes of metals and non-metals, offering a foundational understanding for students to navigate the complexities of chemical interactions and classifications in the realm of science.
Properties of Metals and non Metals
This document discusses the physical and chemical properties of metals and non-metals. It describes how metals are generally solids, malleable, and good conductors, while non-metals can be solids, liquids, or gases and are not malleable. It explains how metals react with oxygen, water, and acids to form metal oxides, hydroxides, and salts. The reactivity of common metals is ranked in a reactivity series. The document also summarizes how metals are extracted from their ores through concentration, reduction, and refining processes. Electrolytic extraction and refining methods are described for reactive metals.
Similar to IGCSE 11.3.2 (20)
Core & Extension Metals I Reactivity Series & Redox.pptx
Core & Extension Metals I Reactivity Series & Redox.pptx
Redox part 3= rusting - reactivity series and diff between electrolytic cell...
Redox part 3= rusting - reactivity series and diff between electrolytic cell...
Metal-and-Non-metal-10 BEST FOR CBSE STUDENTS.pptx
Metal-and-Non-metal-10 BEST FOR CBSE STUDENTS.pptx
More from shaunoff
5. using electromagnets
Lifts, cars, and other large electrical machines use high currents. Relays use an electromagnet to allow a small current in one circuit to control a large current in another circuit. This allows a small current to control whether a large current flows through another circuit by closing or opening a switch.
2
The circuit for a door bell contains an electromagnet that pulls an armature towards it when the circuit is closed, causing a hammer to strike the bell and produce sound. The movement of the armature then breaks the circuit, allowing the hammer to return to its original position, and this sequence repeats to make the bell ring continuously whenever the door bell button is pressed.
1
An electromagnet on a recycling plant conveyor belt is used to pick up and move metal cans. Electromagnets attract ferromagnetic metals like iron, nickel, and cobalt. Electromagnets have the advantage over permanent magnets in that their magnetic field can be switched on and off by controlling the electric current running through the magnet coils.
5
The document presents results from an experiment investigating electromagnets. It shows that increasing the number of coils or the current in an electromagnet increases the number of drawing pins attracted. Graphs illustrate the direct relationship between the number of coils/current and the number of drawing pins attracted.
4
An experiment was designed to investigate how changing the current and number of coils affects the strength of an electromagnet. The apparatus shown could be used by altering the current running through the coils or changing the number of coils wrapped around the iron core, then measuring the effect on the magnetic force produced. Results could show that increasing either the current or number of coils strengthens the electromagnet.
3
The document discusses two experiments that can investigate factors affecting the strength of an electromagnet other than the presence of an iron core. The first experiment would examine how the number of coils influences the number of drawing pins attracted while keeping current the same. The second would look at how the size of the current affects the number of pins for a constant number of coils.
6. halides
Halides are compounds formed between halogens (F, Cl, Br, I) and metals. They have many industrial, medical, and household applications. Halides can be identified by their reaction with silver nitrate solution to form precipitates of insoluble silver halides. The hydrogen halides are colorless gases with hydrogen fluoride having an unexpectedly high boiling point due to hydrogen bonding between H-F molecules. Larger halide ions are more reactive reducing agents as their outer electrons are farther from the nucleus and more easily donated.
4. g7 and g1
Alkali metals react vigorously with chlorine to form metal chlorides. Lithium reacts with chlorine gas to form lithium chloride according to the chemical equation 2Li (s) + Cl2 (g) → 2LiCl (s). Sodium also reacts with chlorine gas in a similar reaction to form sodium chloride, represented by the equation 2Na (s) + Cl2 (g) → 2NaCl (s).
3. group 7
The document discusses the chemical properties of the halogens (fluorine, chlorine, bromine, iodine, astatine) by examining their reactivity trends down the group in reactions with iron wool and hydrogen. It notes that reactivity decreases down the group, with chlorine causing iron wool to burn brightly, bromine less so, and iodine only slightly. It also examines the halogens' reactions with metals like sodium and nonmetals like hydrogen to form halides, and displacement reactions between halogens and halide ions.
2. group 1
The document discusses the chemical properties of alkali metals. It explains that alkali metals react vigorously with oxygen and water. The reactivity increases down the group as the atoms get larger, shielding the outer electrons from the nucleus and making them easier to lose. Equations for reactions of lithium, sodium, and potassium with oxygen, water, and other substances are provided. Flame tests for group 2 metals are also discussed.
5.displacement
The document discusses the chemical properties of halogens, specifically their oxidizing abilities in displacement reactions. It states that in displacement reactions between halogens and halides, the halogen acts as an oxidizing agent by oxidizing the halide ion and being reduced to form the halide ion itself. The order of increasing oxidizing ability among the halogens is F > Cl > Br > I. An example reaction of chlorine displacing bromine is provided, and it is explained that in the reaction, chlorine is reduced while bromide is oxidized.
1. group 0
The document discusses the properties and discovery of noble gases. It notes that:
- Noble gases (group 0) are very unreactive due to their full outer electron shells. This stability makes them similar across the group.
- Helium was first discovered on the sun in 1868. Argon was discovered in the 1890s after nitrogen from air was found to contain a small quantity of an inert element.
- Ramsay realized argon needed its own group and later discovered it contained traces of other noble gases - neon, krypton, and xenon. Radon was discovered in 1900.
4
The document discusses how changing the pressure affects the equilibrium of reversible gas reactions. It states that if the pressure is increased, the equilibrium will shift in the direction that decreases the number of gas molecules. If the pressure is decreased, the equilibrium will shift in the direction that increases the number of gas molecules. It also provides the example of nitrogen dioxide and dinitrogen tetroxide, explaining that if the pressure of this system is increased, more dinitrogen tetroxide will be produced.
3
Increasing the concentration of a substance in a reversible reaction shifts the equilibrium to decrease the concentration of that substance. For example, adding more water to a reaction producing bismuth oxychloride and hydrochloric acid from bismuth chloride and water would shift the equilibrium right, producing more products. Similarly, adding more chlorine gas to a reaction producing iodine trichloride from chlorine and iodine chloride would make the mixture appear more yellow by shifting the equilibrium to the right.
2
The document discusses exothermic and endothermic reactions. It states that all reactions are exothermic in one direction, releasing heat, and endothermic in the other direction, absorbing heat. It also explains that if temperature is increased, the equilibrium will shift in the endothermic direction to decrease temperature, and if temperature is decreased, the equilibrium will shift in the exothermic direction to increase temperature. It provides the example of nitrogen dioxide and dinitrogen tetroxide, where the forward reaction is exothermic and the backward reaction is endothermic. If temperature is increased in this system, more nitrogen dioxide will be produced.
5
Catalysts speed up chemical reactions by lowering the activation energy of the reaction pathway, without being used up in the process. When added to a reversible reaction, a catalyst increases the rates of both the forward and reverse reactions equally, resulting in no change to the equilibrium position but equilibrium being reached faster. Catalysts are particularly important in industrial applications as they allow reactions to proceed more quickly.
6
Ammonia is produced industrially through the Haber process, which involves reacting nitrogen and hydrogen at high pressures and temperatures. However, the reaction is reversible and does not go to completion. To maximize yield while keeping costs low, manufacturers use a compromise of 450°C and 200 atmospheres, as extremely high pressures require expensive equipment and low temperatures slow the reaction rate. Key costs in ammonia production include raw materials, energy, equipment, wages. Yield is maximized by using a catalyst, removing ammonia as it forms, and recycling unreacted gases.
1
Le Chatelier's principle states that if a system in dynamic equilibrium experiences a change, the equilibrium will shift to counteract the change. Specifically, increasing temperature shifts equilibrium towards the endothermic direction, increasing concentration shifts equilibrium away from that substance, and increasing pressure shifts equilibrium away from the gas producing side.
IB 3.2.2.5
The melting points of elements in group 1 decrease down the group because the atomic radius increases, resulting in weaker metallic bonds and a weaker attraction between the nucleus and delocalized electrons. The melting points given for lithium, sodium, potassium, rubidium, and cesium show this decreasing trend.
IB 3.2.2.4
Electronegativity decreases down a group because the atomic radius increases and shielding increases due to electrons filling new principal energy levels, making the increased nuclear charge less significant. Therefore, iodine has a larger atomic radius and attracts electron density in a covalent bond less strongly than fluorine.
More from shaunoff (20)
IGCSE 11.3.2
- 2. Reactivity of metals All metals have low numbers of electrons in their outermost shells. To achieve a full octet they need to lose electrons.
- 3. Reactivity of metals All metals have low numbers of electrons in their outermost shells. To achieve a full octet they need to lose electrons. Na(s) Na+(aq) + e-
- 4. Reactivity of metals All metals have low numbers of electrons in their outermost shells. To achieve a full octet they need to lose electrons. Na(s) Na+(aq) + e- Although all metals need to lose electrons, some metals lose them a lot easier. We say they are more reactive
- 5. Reactivity of metals All metals have low numbers of electrons in their outermost shells. To achieve a full octet they need to lose electrons. Na(s) Na+(aq) + e- Although all metals need to lose electrons, some metals lose them a lot easier. We say they are more reactive Metals can be ordered by how likely they are to lose electrons. We call this the reactivity series.
- 6. Reactivity of metals potassium sodium calcium magnesium aluminium (carbon) zinc iron lead (hydrogen) copper silver gold platinum
- 7. Reactivity of metals potassium sodium calcium magnesium increasing reactivity aluminium (carbon) zinc iron lead (hydrogen) copper silver gold platinum
- 8. Reactivity of metals potassium sodium Metals high in the reactivity calcium series are very reactive. magnesium They will very readily lose increasing reactivity aluminium electrons to achieve a full (carbon) outer shell zinc iron lead (hydrogen) copper silver gold platinum
- 9. Reactivity of metals potassium sodium Metals high in the reactivity calcium series are very reactive. magnesium They will very readily lose increasing reactivity aluminium electrons to achieve a full (carbon) outer shell zinc iron lead (hydrogen) copper Metals low in the reactivity silver series are unreactive. They gold do not like to lose electrons platinum