This document discusses interference coordination in heterogeneous networks with open access small cells. It proposes using cooperative clustering of small cells, block diagonalization precoding, and water filling power allocation to manage interference. The system model and simulation results are presented. Coordination strategies including block diagonalization and water filling power allocation outperform previous non-cooperative and equal power allocation schemes in terms of sum rate capacity.
Wireless sensor networks, clustering, Energy efficient protocols, Particles S...IJMIT JOURNAL
Wireless sensor networks (WSN) is composed of a large number of small nodes with limited functionality.
The most important issue in this type of networks is energy constraints. In this area several researches have
been done from which clustering is one of the most effective solutions. The goal of clustering is to divide
network into sections each of which has a cluster head (CH). The task of cluster heads collection, data
aggregation and transmission to the base station is undertaken. In this paper, we introduce a new approach
for clustering sensor networks based on Particle Swarm Optimization (PSO) algorithm using the optimal
fitness function, which aims to extend network lifetime. The parameters used in this algorithm are residual
energy density, the distance from the base station, intra-cluster distance from the cluster head. Simulation
results show that the proposed method is more effective compared to protocols such as (LEACH, CHEF,
PSO-MV) in terms of network lifetime and energy consumption.
Wireless sensor networks, clustering, Energy efficient protocols, Particles S...IJMIT JOURNAL
Wireless sensor networks (WSN) is composed of a large number of small nodes with limited functionality.
The most important issue in this type of networks is energy constraints. In this area several researches have
been done from which clustering is one of the most effective solutions. The goal of clustering is to divide
network into sections each of which has a cluster head (CH). The task of cluster heads collection, data
aggregation and transmission to the base station is undertaken. In this paper, we introduce a new approach
for clustering sensor networks based on Particle Swarm Optimization (PSO) algorithm using the optimal
fitness function, which aims to extend network lifetime. The parameters used in this algorithm are residual
energy density, the distance from the base station, intra-cluster distance from the cluster head. Simulation
results show that the proposed method is more effective compared to protocols such as (LEACH, CHEF,
PSO-MV) in terms of network lifetime and energy consumption.
The Wireless sensor networks (WSN) consisting of a large number of sensors that are effective for gathering data
in a variety of environments, as the sensor operate on battery which is of limited power. To support high scalability and better data aggregation in fixed base station communication, sensor nodes are often grouped into disjoint, non overlapping subsets called clusters. Clusters create hierarchical WSN which incorporate efficient utilization of limited resources of sensor nodes. These clusters are formed by specialized cells. Each cluster is managed by a special node called cluster head and advanced node. An algorithm for better cluster head selection
based on the node energy and the distance from base station to the cluster head for the efficient transmission and to reduce energy consumption by the sensor nodes is proposed in this paper. And the same algorithm is compared with the LEACH algorithm in terms of energy consumption.
NEW APPROACH TO IMPROVING LIFETIME IN HETEROGENEOUS WIRELESS SENSOR NETWORKS ...chokrio
The major challenge for wireless sensor networks is energy consumption minimization. Wireless transmission consumes much more of energy. In the clustered network, a few nodes become cluster heads which causes the energetic heterogeneity. Therefore the behavior of the sensor network becomes very unstable. Hence, the need to apply the balancing of energy consumption across all nodes of the heterogeneous network is very important to prevent the death of those nodes and thereafter increase the
lifetime of the network. DEEC (Distributed Energy Efficient Clustering) is one of routing protocols
designed to extend the stability time of the network by reducing energy consumption. A disadvantage of
DEEC, which doesn’t takes into account the cluster size and the density of nodes in this cluster to elect the
cluster heads. When multiple cluster heads are randomly selected within a small area, a big extra energy
loss occurs. The amount of lost energy is approximately proportional to the number of cluster heads in this
area. In this paper, we propose to improve DEEC by a modified energy efficient algorithm for choosing
cluster heads that exclude a number of low energy levels nodes due to their distribution density and their
dimensions area. We show by simulation in MATLAB that the proposed approach increases the number of
received messages and prolong the lifetime of the network compared to DEEC. We conclude by studying
the parameters of heterogeneity that proposed technique provides a longer stability period which increases
by increasing the number of nodes which are excluded from the cluster head selection.
SECTOR TREE-BASED CLUSTERING FOR ENERGY EFFICIENT ROUTING PROTOCOL IN HETEROG...IJCNCJournal
One of the main challenges for researchers to build routing protocols is how to use energy efficiently to extend the lifespan of the whole wireless sensor networks (WSN) because sensor nodes have limited battery power resources. In this work, we propose a Sector Tree-Based clustering routing protocol (STB-EE) for Energy Efficiency to cope with this problem, where the entire network area is partitioned into dynamic sectors (clusters), which balance the number of alive nodes. The nodes in each sector only communicate with their nearest neighbour by constructing a minimum tree based on the Kruskal algorithm and using mixed distance from candidate node to base station (BS) and remaining energy of candidate nodes to determine which node will become the cluster head (CH) in each cluster? By calculating the duration of time in each round for suitability, STB-EE increases the number of data packets sent to the BS. Our simulation results show that the network lifespan using STB-EE can be improved by about 16% and 10% in comparison to power-efficient gathering in sensor information system (PEGASIS) and energy-efficient PEGASIS-based protocol (IEEPB), respectively.
QoS controlled capacity offload optimization in heterogeneous networksjournalBEEI
An efficient resource allocation mechanism in the physical layer of wireless networks ensures that resources such as bandwidth and power are used with high efficiency in spite of low delay and high edge user data rate. Microcells in the network are typically set with bias settings to artificially increase the Signal-to-Interference-Plus-Noise Ratio, thus encouraging users to offload to the microcell. However, the artificial bias settings are tedious and often suboptimal. This work presents a low complexity algorithm for maximization of network capacity with load balancing in a heterogeneous network without the need for bias setting. The small cells were deployed in a grid topology at a selected distance from macrocell to enhance network capacity through coverage overlap. User association and minimum user throughput were incorporated as constraints to enable closer simulation to real word Quality of Service requirements. The results showed that the proposed algorithm was able to maintain less than 10% user drop rate. The proposed algorithm can increase user confidence as well as maintain load balancing, maintain the scalability, and reduce power consumption of the wireless network.
CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...ijwmn
A wireless sensor network is composed of many sensor nodes, that have beengiven out in a
specific zoneandeach of them hadanability of collecting information from the environment and
sending collected data to the sink. The most significant issues in wireless sensor networks,
despite the recent progress is the trouble of the severe limitations of energy resources.Since that
in different applications of sensor nets, we could throw a static or mobile sink, then all aspects of
such networks should be planned with an awareness of energy.One of the most significant topics
related to these networks, is routing. One of the most widely used and efficient methods of
routing isa hierarchy (based on clustering) method.
In The present study with the objective of cutting down energy consumption and persistence of
network coverage, we have offered a novel algorithm based on clustering algorithms and multihop routing.To achieve this goal, first, we layer the network environment based on the size of the
network.We will identify the optimal number of cluster heads and every cluster head based on
the mechanism of topology control will start to accept members.Likewise, we set the first layer
as gate layer and subsequently identifying the gate’s nodes, we’d turn away half of the sensors
and then stop using energy and the remaining nodes in this layer will join the gate’s nodes
because they hold a critical part in bettering the functioning of the system. Cluster heads off
following layers send the information to cluster heads in the above layer until sent data will be
sent to gate’s nodes and finally will be sent to sink. We have tested the proposed algorithm in
two situations 1) when the sink is off and 2)when a sink is on and simulation data shows that
proposed algorithm has better performance in terms of the life span of a network than LEACH
and ELEACH protocols.
BOTTLENECK DETECTION ALGORITHM TO ENHANCE LIFETIME OF WSNijngnjournal
In recent years, a wireless sensor network is gaining much more importance due to its immense
contribution in numerous applications. Deployment of sensor nodes that would reduce computation,
minimize cost and gaining high degree of network connectivity is an challenging task. Random deployment
of sensor nodes causes the wireless sensor networks to face topological weaknesses such as communication
bottlenecks, network partitions and sensing holes. These problems lead to uneven energy utilization,
reduction in reliability of network and reduction in network lifetime. Bottleneck detection algorithm is
proposed to identify bottleneck and minimal bottleneck zones in network. Additional sensor node
deployment strategy is used in bottleneck detection algorithm to extend network lifetime. Random
additional sensor node deployment and Targeted additional sensor node deployment are proposed to
enhance network lifetime. Deployment strategies are compared with respect to network parameters such as
throughput, packet delivery fraction and network lifetime.
Various Clustering Techniques in Wireless Sensor NetworkEditor IJCATR
This document describes the various clustering techniques used in wireless sensor networks. Wireless sensor networks are
having vast applications in all fields which utilize sensor nodes. Clustering techniques are required so that sensor networks can
communicate in most efficient way.
WIRELESS SENSOR NETWORK CLUSTERING USING PARTICLES SWARM OPTIMIZATION FOR RED...IJMIT JOURNAL
Wireless sensor networks (WSN) is composed of a large number of small nodes with limited functionality. The most important issue in this type of networks is energy constraints. In this area several researches have been done from which clustering is one of the most effective solutions. The goal of clustering is to divide network into sections each of which has a cluster head (CH). The task of cluster heads collection, data aggregation and transmission to the base station is undertaken. In this paper, we introduce a new approach for clustering sensor networks based on Particle Swarm Optimization (PSO) algorithm using the optimal fitness function, which aims to extend network lifetime. The parameters used in this algorithm are residual energy density, the distance from the base station, intra-cluster distance from the cluster head. Simulation results show that the proposed method is more effective compared to protocols such as (LEACH, CHEF, PSO-MV) in terms of network lifetime and energy consumption.
Load Balancing for Achieving the Network Lifetime in WSN-A SurveyAM Publications
a wireless sensor network is network form of sense compute, and communication elements which helps to
observe, events in a specified environment. Sensor nodes in wireless sensor network are depends on battery power they
have limited transmission range that’s why energy efficiency plays a vital role to minimize the overhead through which
the Network Lifetime can be achieved. The lifetime of network, depends on number of nodes, strength, range of area
and connectivity of nodes in the network. In this paper we are over viewing techniques which are used in wireless sensor
network for load balancing. Wireless sensor network having different nodes with different kind of energy which can be
improve the lifetime of the network and its dependability. This paper will provide the person who reads with the
groundwork for research in load balancing techniques for wireless sensor networks.
A New Method for Reducing Energy Consumption in Wireless Sensor Networks usin...Editor IJCATR
Nowadays, wireless sensor networks, clustering protocol based on the neighboring nodes into separate clusters and fault
tolerance for each cluster exists for sensors to send information to the base station, to gain the best performance in terms of increased
longevity and maintain tolerance than with other routing methods. However, most clustering protocols proposed so far, only
geographical proximity (neighboring) cluster formation is considered as a parameter. In this study, a new clustering protocol and fault
tolerance based on the fuzzy algorithms are able to clustering nodes in sensor networks based on fuzzy logic and fault tolerance. This
protocol uses clustering sensor nodes and fault tolerance exist in the network to reduce energy consumption, so that faulty sensors
from neighboring nodes are used to cover the errors, work based on the most criteria overlay neighbor sensors with defective sensors,
distance neighbor sensors from fault sensor and distance neighbor sensors from central station is done. Superior performance of the
protocol can be seen in terms of increasing the network lifetime and maintain the best network tolerance in comparison with previous
protocols such as LEACH in the simulation results.
Every cluster comprise of a leader which is known as cluster head. The cluster head will be chosen by the sensor nodes in the individual cluster or be pre-assigned by the user. The main advantages of clustering are the transmission of aggregated data to the base station, offers scalability for huge number of nodes and trims down energy consumption. Fundamentally, clustering could be classified into centralized clustering, distributed clustering and hybrid clustering. In centralized clustering, the cluster head is fixed. The rest of the nodes in the cluster act as member nodes. In distributed clustering, the cluster head is not fixed. The cluster head keeps on shifting form node to node within the cluster on the basis of some parameters. Hybrid clustering is the combination of both centralized clustering and distributed clustering mechanisms. This paper gives a brief overview on clustering process in wireless sensor networks. A research on the well evaluated distributed clustering algorithm Low Energy Adaptive Clustering Hierarchy (LEACH) and its followers are portrayed artistically. To overcome the drawbacks of these existing algorithms a hybrid distributed clustering model has been proposed for attaining energy efficiency to a larger scale.
ALL ABOUT DATA AGGREGATION IN WIRELESS SENSOR NETWORKSEditor IJCTER
A wireless sensor network is a computer network that consists of small devices called
sensor nodes. These sensor nodes have the ability to sense different environmental conditions like
temperature, pressure, etc. All these sensor nodes send their data to a central node or base station.
This creates a large communication overhead the energy source for these nodes is usually a battery.
This gives rise to huge consumption of energy and resources. So a solution is required that
overcomes the above problems. Data aggregation is one of its solutions. This method consists of
aggregators that combine the data coming from the sensor nodes and then passes it to the base
station. With the help of data aggregation we reduce the energy consumption by eliminating
redundancy and we can enhance the life time of wireless network. The purpose of the proposed paper
is to explain data aggregation in wireless sensor network, how it works, different techniques of data
aggregation and the comparison among them.
The Wireless sensor networks (WSN) consisting of a large number of sensors that are effective for gathering data
in a variety of environments, as the sensor operate on battery which is of limited power. To support high scalability and better data aggregation in fixed base station communication, sensor nodes are often grouped into disjoint, non overlapping subsets called clusters. Clusters create hierarchical WSN which incorporate efficient utilization of limited resources of sensor nodes. These clusters are formed by specialized cells. Each cluster is managed by a special node called cluster head and advanced node. An algorithm for better cluster head selection
based on the node energy and the distance from base station to the cluster head for the efficient transmission and to reduce energy consumption by the sensor nodes is proposed in this paper. And the same algorithm is compared with the LEACH algorithm in terms of energy consumption.
NEW APPROACH TO IMPROVING LIFETIME IN HETEROGENEOUS WIRELESS SENSOR NETWORKS ...chokrio
The major challenge for wireless sensor networks is energy consumption minimization. Wireless transmission consumes much more of energy. In the clustered network, a few nodes become cluster heads which causes the energetic heterogeneity. Therefore the behavior of the sensor network becomes very unstable. Hence, the need to apply the balancing of energy consumption across all nodes of the heterogeneous network is very important to prevent the death of those nodes and thereafter increase the
lifetime of the network. DEEC (Distributed Energy Efficient Clustering) is one of routing protocols
designed to extend the stability time of the network by reducing energy consumption. A disadvantage of
DEEC, which doesn’t takes into account the cluster size and the density of nodes in this cluster to elect the
cluster heads. When multiple cluster heads are randomly selected within a small area, a big extra energy
loss occurs. The amount of lost energy is approximately proportional to the number of cluster heads in this
area. In this paper, we propose to improve DEEC by a modified energy efficient algorithm for choosing
cluster heads that exclude a number of low energy levels nodes due to their distribution density and their
dimensions area. We show by simulation in MATLAB that the proposed approach increases the number of
received messages and prolong the lifetime of the network compared to DEEC. We conclude by studying
the parameters of heterogeneity that proposed technique provides a longer stability period which increases
by increasing the number of nodes which are excluded from the cluster head selection.
SECTOR TREE-BASED CLUSTERING FOR ENERGY EFFICIENT ROUTING PROTOCOL IN HETEROG...IJCNCJournal
One of the main challenges for researchers to build routing protocols is how to use energy efficiently to extend the lifespan of the whole wireless sensor networks (WSN) because sensor nodes have limited battery power resources. In this work, we propose a Sector Tree-Based clustering routing protocol (STB-EE) for Energy Efficiency to cope with this problem, where the entire network area is partitioned into dynamic sectors (clusters), which balance the number of alive nodes. The nodes in each sector only communicate with their nearest neighbour by constructing a minimum tree based on the Kruskal algorithm and using mixed distance from candidate node to base station (BS) and remaining energy of candidate nodes to determine which node will become the cluster head (CH) in each cluster? By calculating the duration of time in each round for suitability, STB-EE increases the number of data packets sent to the BS. Our simulation results show that the network lifespan using STB-EE can be improved by about 16% and 10% in comparison to power-efficient gathering in sensor information system (PEGASIS) and energy-efficient PEGASIS-based protocol (IEEPB), respectively.
QoS controlled capacity offload optimization in heterogeneous networksjournalBEEI
An efficient resource allocation mechanism in the physical layer of wireless networks ensures that resources such as bandwidth and power are used with high efficiency in spite of low delay and high edge user data rate. Microcells in the network are typically set with bias settings to artificially increase the Signal-to-Interference-Plus-Noise Ratio, thus encouraging users to offload to the microcell. However, the artificial bias settings are tedious and often suboptimal. This work presents a low complexity algorithm for maximization of network capacity with load balancing in a heterogeneous network without the need for bias setting. The small cells were deployed in a grid topology at a selected distance from macrocell to enhance network capacity through coverage overlap. User association and minimum user throughput were incorporated as constraints to enable closer simulation to real word Quality of Service requirements. The results showed that the proposed algorithm was able to maintain less than 10% user drop rate. The proposed algorithm can increase user confidence as well as maintain load balancing, maintain the scalability, and reduce power consumption of the wireless network.
CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...ijwmn
A wireless sensor network is composed of many sensor nodes, that have beengiven out in a
specific zoneandeach of them hadanability of collecting information from the environment and
sending collected data to the sink. The most significant issues in wireless sensor networks,
despite the recent progress is the trouble of the severe limitations of energy resources.Since that
in different applications of sensor nets, we could throw a static or mobile sink, then all aspects of
such networks should be planned with an awareness of energy.One of the most significant topics
related to these networks, is routing. One of the most widely used and efficient methods of
routing isa hierarchy (based on clustering) method.
In The present study with the objective of cutting down energy consumption and persistence of
network coverage, we have offered a novel algorithm based on clustering algorithms and multihop routing.To achieve this goal, first, we layer the network environment based on the size of the
network.We will identify the optimal number of cluster heads and every cluster head based on
the mechanism of topology control will start to accept members.Likewise, we set the first layer
as gate layer and subsequently identifying the gate’s nodes, we’d turn away half of the sensors
and then stop using energy and the remaining nodes in this layer will join the gate’s nodes
because they hold a critical part in bettering the functioning of the system. Cluster heads off
following layers send the information to cluster heads in the above layer until sent data will be
sent to gate’s nodes and finally will be sent to sink. We have tested the proposed algorithm in
two situations 1) when the sink is off and 2)when a sink is on and simulation data shows that
proposed algorithm has better performance in terms of the life span of a network than LEACH
and ELEACH protocols.
BOTTLENECK DETECTION ALGORITHM TO ENHANCE LIFETIME OF WSNijngnjournal
In recent years, a wireless sensor network is gaining much more importance due to its immense
contribution in numerous applications. Deployment of sensor nodes that would reduce computation,
minimize cost and gaining high degree of network connectivity is an challenging task. Random deployment
of sensor nodes causes the wireless sensor networks to face topological weaknesses such as communication
bottlenecks, network partitions and sensing holes. These problems lead to uneven energy utilization,
reduction in reliability of network and reduction in network lifetime. Bottleneck detection algorithm is
proposed to identify bottleneck and minimal bottleneck zones in network. Additional sensor node
deployment strategy is used in bottleneck detection algorithm to extend network lifetime. Random
additional sensor node deployment and Targeted additional sensor node deployment are proposed to
enhance network lifetime. Deployment strategies are compared with respect to network parameters such as
throughput, packet delivery fraction and network lifetime.
Various Clustering Techniques in Wireless Sensor NetworkEditor IJCATR
This document describes the various clustering techniques used in wireless sensor networks. Wireless sensor networks are
having vast applications in all fields which utilize sensor nodes. Clustering techniques are required so that sensor networks can
communicate in most efficient way.
WIRELESS SENSOR NETWORK CLUSTERING USING PARTICLES SWARM OPTIMIZATION FOR RED...IJMIT JOURNAL
Wireless sensor networks (WSN) is composed of a large number of small nodes with limited functionality. The most important issue in this type of networks is energy constraints. In this area several researches have been done from which clustering is one of the most effective solutions. The goal of clustering is to divide network into sections each of which has a cluster head (CH). The task of cluster heads collection, data aggregation and transmission to the base station is undertaken. In this paper, we introduce a new approach for clustering sensor networks based on Particle Swarm Optimization (PSO) algorithm using the optimal fitness function, which aims to extend network lifetime. The parameters used in this algorithm are residual energy density, the distance from the base station, intra-cluster distance from the cluster head. Simulation results show that the proposed method is more effective compared to protocols such as (LEACH, CHEF, PSO-MV) in terms of network lifetime and energy consumption.
Load Balancing for Achieving the Network Lifetime in WSN-A SurveyAM Publications
a wireless sensor network is network form of sense compute, and communication elements which helps to
observe, events in a specified environment. Sensor nodes in wireless sensor network are depends on battery power they
have limited transmission range that’s why energy efficiency plays a vital role to minimize the overhead through which
the Network Lifetime can be achieved. The lifetime of network, depends on number of nodes, strength, range of area
and connectivity of nodes in the network. In this paper we are over viewing techniques which are used in wireless sensor
network for load balancing. Wireless sensor network having different nodes with different kind of energy which can be
improve the lifetime of the network and its dependability. This paper will provide the person who reads with the
groundwork for research in load balancing techniques for wireless sensor networks.
A New Method for Reducing Energy Consumption in Wireless Sensor Networks usin...Editor IJCATR
Nowadays, wireless sensor networks, clustering protocol based on the neighboring nodes into separate clusters and fault
tolerance for each cluster exists for sensors to send information to the base station, to gain the best performance in terms of increased
longevity and maintain tolerance than with other routing methods. However, most clustering protocols proposed so far, only
geographical proximity (neighboring) cluster formation is considered as a parameter. In this study, a new clustering protocol and fault
tolerance based on the fuzzy algorithms are able to clustering nodes in sensor networks based on fuzzy logic and fault tolerance. This
protocol uses clustering sensor nodes and fault tolerance exist in the network to reduce energy consumption, so that faulty sensors
from neighboring nodes are used to cover the errors, work based on the most criteria overlay neighbor sensors with defective sensors,
distance neighbor sensors from fault sensor and distance neighbor sensors from central station is done. Superior performance of the
protocol can be seen in terms of increasing the network lifetime and maintain the best network tolerance in comparison with previous
protocols such as LEACH in the simulation results.
Every cluster comprise of a leader which is known as cluster head. The cluster head will be chosen by the sensor nodes in the individual cluster or be pre-assigned by the user. The main advantages of clustering are the transmission of aggregated data to the base station, offers scalability for huge number of nodes and trims down energy consumption. Fundamentally, clustering could be classified into centralized clustering, distributed clustering and hybrid clustering. In centralized clustering, the cluster head is fixed. The rest of the nodes in the cluster act as member nodes. In distributed clustering, the cluster head is not fixed. The cluster head keeps on shifting form node to node within the cluster on the basis of some parameters. Hybrid clustering is the combination of both centralized clustering and distributed clustering mechanisms. This paper gives a brief overview on clustering process in wireless sensor networks. A research on the well evaluated distributed clustering algorithm Low Energy Adaptive Clustering Hierarchy (LEACH) and its followers are portrayed artistically. To overcome the drawbacks of these existing algorithms a hybrid distributed clustering model has been proposed for attaining energy efficiency to a larger scale.
ALL ABOUT DATA AGGREGATION IN WIRELESS SENSOR NETWORKSEditor IJCTER
A wireless sensor network is a computer network that consists of small devices called
sensor nodes. These sensor nodes have the ability to sense different environmental conditions like
temperature, pressure, etc. All these sensor nodes send their data to a central node or base station.
This creates a large communication overhead the energy source for these nodes is usually a battery.
This gives rise to huge consumption of energy and resources. So a solution is required that
overcomes the above problems. Data aggregation is one of its solutions. This method consists of
aggregators that combine the data coming from the sensor nodes and then passes it to the base
station. With the help of data aggregation we reduce the energy consumption by eliminating
redundancy and we can enhance the life time of wireless network. The purpose of the proposed paper
is to explain data aggregation in wireless sensor network, how it works, different techniques of data
aggregation and the comparison among them.
Mobility Management Challenges and Issues in 4G Heterogeneous NetworksAJAL A J
Towards 4G
User centric, user controlled services and
context-aware applications
From a user prospective
Multiple Heterogeneous network operators
part of
Multiple user environments
accessed using
Multiple heterogeneous devices
Andy sutton - Multi-RAT mobile backhaul for Het-Netshmatthews1
At our 5th Telecoms Evangelist meet up Andy Sutton of EE gave a fantastic presentation reviewing the latest trends and developments in mobile backhaul architecture, strategy and technology. Starting with a review of backhaul capacity, performance requirements and protocol architecture, the presentation initially focused on the macro cell layer before going on to discuss options for evolving towards a true multi-layered heterogeneous network. Take a look!
Clustering provides an effective method for
extending the lifetime of a wireless sensor network. Current
clustering methods selecting cluster heads with more residual
energy, and rotating cluster heads periodically to distribute the
energy consumption among nodes in each cluster. However,
they rarely consider the hot spot problem in multi hop sensor
networks. When cluster heads forward their data to the base
station, the cluster heads closer to the base station are heavily
burdened with traffic and tend to die much faster. To mitigate
the hot spot problem, we propose a Novel Energy Efficient
Unequal Clustering Routing (NEEUC) protocol. It uses residual
energy and groupsthe nodesinto clusters of unequal layers
Block diagonalization precoding and power allocation for clustering small-cel...journalBEEI
The clustering network is a solution to improve data-rate transmission in small-cells. In this case, clustering small-cells (CSCs) adopt a multiple antennas concept. The multiple antennas are used to maximize the downlink data-rate transmission at the users, but it requires precoding techniques to minimize interference among CSC users. This paper proposes a block diagonalization (BD) as a precoding technique for minimizing interference among CSC users. The performance of the BD precoding implemented on the clustering network under various numbers of small-cells. The CSC also implements a water-filling power allocation (PA-CoopWF) to distribute the available transmission power along with the CSCs antennas. To show the performance, our paper simulates two types of precoding techniques; those are the proposed BD and minimum mean square error (MMSE) in CSCs. Based on the receiver user parts under the overlapping coordination of CSCs, our method based on the BD precoding achieves considerably higher data-rate transmission compared to the MMSE precoding, especially on larger clusters. The simulation also shows that by implementing CSC with the BD in short-range distances and higher numbers of antennas, it promotes better data-rate performances compared to the MMSE precoding by 2.75 times at distance 100m and 67% at 50 antennas.
Wireless sensor networks have recently come into prominence because they hold the
potential to revolutionize many segments. The Wireless Sensor Network (WSN) is made up of a
collection of sensor nodes, which were small energy constrained devices. Routing technique is one of
the research area in wireless sensor network. So by designing an efficient routing protocol for
reducing energy consumption is the important factor. In this paper, a brief introduction to routing
challenges in WSN have been mentioned. This paper also provides the basic classification of routing
protocols in WSNs along with the most energy efficient protocol named LEACH along with its
advantages and disadvantages. This paper also focus on some of the improved version of LEACH
protocol.
Advancement of Zone Based Energy Efficient Protocol for WSNijtsrd
The Wireless Sensor Networks WSNs is an area of emerging technology which involves numerous number of sensor nodes motes, a base station, processing power and storage. However, these have very limited power. The nodes exchange data and control messages with each other and towards the base station to fulfill a sensing and monitoring process. In present work, we have suggested a region based routing protocol for heterogeneous WSNs. In proposed technique, few motes forward data straight to the base station BS whereas other motes follow clustering method to forward data to the BS. We have employed R SEP protocol and equated with standard Low Energy adaptive clustering hierarchy LEACH and SEP protocols. Experimental outcomes exhibits that R SEP improves the lifetime of WSN and the amount of work accomplished in the network by R SEP is much more than the conventional LEACH and SEP protocols. Anita | Kirti Bhatia | Shalini Bhadola "Advancement of Zone Based Energy Efficient Protocol for WSN" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32987.pdf Paper Url :https://www.ijtsrd.com/computer-science/computer-network/32987/advancement-of-zone-based-energy-efficient-protocol-for-wsn/anita
Approach to minimizing consumption of energy in wireless sensor networks IJECEIAES
The Wireless Sensor Networks (WSN) technology has benefited from a central position in the research space of future emerging networks by its diversity of applications fields and also by its optimization techniques of its various constraints, more essentially, the minimization of nodal energy consumption to increase the global network lifetime. To answer this saving energy problem, several solutions have been proposed at the protocol stack level of the WSN. In this paper, after presenting a state of the art of this technology and its conservation energy techniques at the protocol stack level, we were interested in the network layer to propose a routing solution based on a localization aspect that allows the creation of a virtual grid on the coverage area and introduces it to the two most well-known energy efficiency hierarchical routing protocols, LEACH and PEGASIS. This allowed us to minimize the energy consumption and to select the clusters heads in a deterministic way unlike LEACH which is done in a probabilistic way and also to minimize the latency in PEGASIS, by decomposing its chain into several independent chains. The simulation results, under "MATLABR2015b", have shown the efficiency of our approach in terms of overall residual energy and network lifetime.
Modeling, Analysis, and Design of Multi-tier and Cognitive Cellular Wireless ...indonesiabelajar
Abstract: Multi-tier architecture with small cells such as femtocells, picocells, macrocells, and metrocells, overlaid with traditional macrocells is considered as a promising option to improve the network coverage and capacity of the next generation cellular wireless networks. Also, in such multi-tier networks, cognitive radio concepts will likely to be used by these small cells to improve the radio spectrum utilization. In this context, modeling, analysis, and design of multi-tier and cognitive cellular networks is increasingly attracting the attention of the research community. Recently, stochastic geometry models have been shown to provide tractable yet accurate performance bounds for multi-tier and cognitive cellular wireless networks. Given the need for interference characterization in multi-tier cellular networks, stochastic geometry models provide high potential to simplify their modeling and provide insights into their design. In this seminar, I will present a review of the stochastic geometry models for single-tier as well as multi-tier and cognitive cellular wireless networks. I will also present a taxonomy based on the target network model, the point process used, and the performance evaluation technique. To this end, I will discuss the open research challenges and future research directions.
Prof Ekram Hossain
Congestion Control Clustering a Review PaperEditor IJCATR
Wireless Sensor Networks consists of sensor nodes which are scattered in the environment, gather data and transmit it to a
base station for processing. Energy conservation in the Wireless Sensor Networks (WSN) is a very important task because of their
limited battery power. The related works so far have been done have tried to solve the problem keeping in the mind the constraints of
WSNs. In this paper, a priority based application specific congestion control clustering (PASCCC) protocol has been studied, which
often integrates the range of motion and heterogeneity of the nodes to detect congestion in a very network. Moreover a comparison of
the various clustering techniques has been done. From the survey it has been found that none of the protocol is efficient for energy
conservation. Hence the paper ends with future scope to overcome these issues.
Heterogeneous LTE Networks and Inter-Cell Interference Coordination - Dec 201...Eiko Seidel
Initial deployments of LTE networks are based on so-called homogeneous networks consisting of base stations providing basic coverage, called macro base stations. The concept of heterogeneous networks has recently attracted considerable attention to optimize performance particularly for unequal user or traffic distribution. Here, the layer of planned high-power macro eNBs is overlaid with layers of lower-power pico or femto eNBs that are deployed in a less well planed or even entirely uncoordinated manner. Such deployments can achieve significantly improved overall capacity and cell-edge performance and are often seen as the second phase in LTE network deployment.
This paper discusses the concept of heterogeneous networks as compared to homogeneous networks. It demonstrates the need for inter-cell interference coordination (ICIC) and outlines some ICIC methods that are feasible with release 8 /9 of the LTE standard. System-level simulation results illustrate the benefits of the various features discussed in the following.
Chain Based Wireless Sensor Network Routing Using Hybrid Optimization (HBO An...IJEEE
In Wireless Sensor Network, due to the
energy restriction of each nodes, efficient routing is very
important in order to save the energy of the hybrid
optimization technique. The results of new protocol i.e.
hybrid have been compared with EEPB and IEEPB.
Simulation results show that the lifetime of Hybrid is better
as compared to EEPB and IEEPB.
The continuously increasing demand for higher data rates results in increasing network density, so that inter-cell interference is becoming the most serious obstacle towards spectral efficiency Considering that radio resources are limited and expensive, new techniques are required for the next generation of cellular networks, to enable a more efficient way to allocate and use radio resources In this framework, we target the design of a frequency reuse 1 scheme, which exploits the coordination between base stations as a tool to mitigate inter-cell interference Aamir Nazir Beigh | Er. Prabhjot Kaur "Inter-Cell Interference" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: http://www.ijtsrd.com/papers/ijtsrd18406.pdf
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
JMeter webinar - integration with InfluxDB and Grafana
Inter-Cell Interference Coordination in Heterogeneous Networks with Open Access of Small Cells
1. Toha Ardi Nugraha
WENS Laboratory
IT Convergence Engineering
Kumoh National Institute of Technology
Inter-Cell Interference Coordination in
Heterogeneous Networks with Open
Access of Small Cells
Wireless and Emerging Networking Siystem Laboratory
2. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Contents
•Introduction
•Problem Formulation
•Previous Works
•System Model
•Simulation Results
•Conclusion
3. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Heterogeneous Networks
• Hetnets : different base station
types, (Macrocell/eNB) and low
power (Small-cells or home base
stations (HeNB)
• Macrocell : a wide area,
• low power Small-cells : hot-spots
and indoor (to offload traffic from
the Macro-layer)
Solution to boost the network
capacity and increase of data traffic
4. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Small Cells
• Shift from voice-only to voice- & data-based traffic
• Improved technologies – smart antennas and
MIMO,
• Dead zone Problem – Poor indoor coverage
• Solution – Small Cells – (YouTube :
http://goo.gl/en8Gc8)
• What is small cells?
improved cellular/indoor coverage, capacity and
applications (ex : SON – Self Organizing Networks, plug and
play)
• Type of small cells?
Femtocells, picocells, metrocells and microcells
5. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Problem Formulation
• High density of small cells
• Problems :
Interference between small cells
• Solution??
Interference management : frequency
reuse and preceding technique (MMSE
and BD)
Small cellSmall cell
Small cellSmall cell
Poor Signal
Co-Channel Interference
(same frequency)
Small Cells
Small Cells
Small Cells
6. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Access Method
Closed Access Open Access
7. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Previous Works and Proposed Scheme
Parameter Previous Works Proposed
Multi Cell Non-Cooperative Cooperative Cooperative
(Clustering)
Scheme Frequency Reuse Precoding : MMSE Precoding : BD
Power Allocation Fractional Equal Power Water Filling
Bandwidth
Allocation
Frequency Reuse
(Weakness)
Full Bandwidth Full Bandwidth
Interference
Cancellation
Inter cell
interference
Inter user
interference
Inter user
interference
System Model
Precoding : Pre define symbol before transmitting
8. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Interference cancelation in cooperative heterogeneous
Network with coordination strategy.
Contribution
• Coordination strategy in Heterogeneous Network,
consider :
– Extended Block Diagonalization scheme (Applied in
Heterogeneous Networks )
– Water filling power Allocation
– Open Acess Method
Proposed Scheme
9. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Power Allocation
more power
(low noise)
Equal Power Water filling
same power allocate to
each channel
Difference power
allocate to each channel
Problem : high
interference (power)
Give the more power
when the channel is
good
10. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
System Model
Parameter Value
Number of small cells
in cluster
2, 3, 4, 7
Number of neighbor
cluster
1
Transmit Power of
small cell
20 dBm/100 mW
Precoding MMSE and BD
Frequency Reuse
Frequency Universal and
Frequency Reuse
Workload Performance
• Number of Clustered Small
Cells in Macrocells
• Power allocation
Sum rate capacity
(data rate)
11. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
SimulationResult
12. Toha Ardi Nugraha - IT Convergence Engineering- KIT
Inter-Cell Interference Coordination in Heterogeneous Networks with Open
Access of Small Cells
Conclusions
• Proposed Interference Coordination in
Heterogeneous Networks
• Power allocations : water filling > equal power
allocation.
• Precoding : BD > MMSE
