Ict fct testing for pcba
•Download as DOC, PDF•
0 likes•43 views
ICT is used to check for component failures and soldering issues during circuit board assembly by testing connections and parameters. FCT powers on the board to test functionality under normal working conditions. ICT checks for correct installation and parameters while FCT checks if the board functions properly. SysPCB is a PCBA factory in China that provides manufacturing and both ICT and FCT testing services.
Report
Share
Report
Share
Recommended
Lect14
The document discusses programming concepts for Unitronics PLCs using VisiLogic software. It describes creating ladder logic programs with contacts, coils and functions to control automation processes. It also covers creating human-machine interfaces (HMIs) with displays, variables and editors to allow operators to monitor and interact with the PLC program. The VisiLogic software is used to write, debug and download PLC and HMI applications to the controller.
OPAL-RT Distributed Multi-User Laboratories
Learn more about OPAL-RT's high-performance distributed multi-user real-time HIL laboratories, part of our Academic and Research offering, optimized to conduct several HIL projects in parallel.
OPAL-RT RT13: Relay testing with HYPERSIM
Relay Testing with HYPERSIM allows for more advanced testing of relays using a simulator rather than traditional open-loop testing. A simulator provides closed-loop testing where the relay response feeds back into the simulation, allowing testing under critical conditions. It offers benefits like evaluating new protection algorithms, studying complex protection schemes, and analyzing interactions between real and virtual relays. Key features include detailed EMT analysis, automation of test sequences, and the ability to simulate faults, disturbances, and communications protocols like IEC 618450.
EC302-Introduction
This document provides an overview of computer aided design (CAD) and circuit simulation. It begins with warnings for the class and then defines CAD as using computers to model physical systems and design variants for manufacturing. It lists several CAD software programs and describes different types of circuit simulations, such as DC analysis and transient analysis. The document outlines the design and simulation process and discusses netlists, elements like sources and passive/active devices, and why simulation is important for verification.
OPAL-RT HYPERSIM Features applied for Relay Testing
This document describes the features and capabilities of HYPERSIM, a real-time simulator from OPAL-RT, for protective relay testing. HYPERSIM allows testing relays in a closed-loop with detailed EMT models, automation of complex test sequences, analysis of relay performance under various faults and interactions, and generation of detailed reports. It supports modeling of power systems, communication protocols like IEC 61850, and integration with other equipment. TestView is used to automate testing, analyze results, and manage test data in databases for archiving. ScopeView and additional analysis tools allow detailed evaluation of relay behavior under different conditions.
14_H00141747_Doula Isham_B30UC_Power System Transient Stability_Poster_2015-16
This document summarizes a student project on analyzing power system transient stability through simulations of three-phase faults. The project involves:
1) Developing MATLAB programs to analyze transient stability for one machine and IEEE 14 bus systems using techniques like equal area criterion and Runge-Kutta.
2) Creating a graphical user interface to allow interactive analysis and training.
3) Testing the tools by simulating three-phase faults at different locations and obtaining critical clearing angles/times to assess stability.
4) Concluding the tools can accurately analyze transient stability and the graphical interface enables better training than traditional methods.
Microprocessors
The document discusses timing diagrams of the 8085 microprocessor and the 8255 Programmable Peripheral Interface (PPI). It provides a timing diagram example for the MVI A, 30H instruction in the 8085. It also explains that the 8255 PPI is a general purpose programmable I/O device that can be used to interface a CPU to external devices like ADCs and DACs. The 8255 has three 8-bit ports (A, B, C) that can be programmed as either inputs or outputs. The 8255 operates in either a bit set/reset mode or input/output mode.
Basic Design and development of drones through mechatronics
It describes the very basic concepts for developing drones and in depth explanation will be provided if any one needed
Recommended
Lect14
The document discusses programming concepts for Unitronics PLCs using VisiLogic software. It describes creating ladder logic programs with contacts, coils and functions to control automation processes. It also covers creating human-machine interfaces (HMIs) with displays, variables and editors to allow operators to monitor and interact with the PLC program. The VisiLogic software is used to write, debug and download PLC and HMI applications to the controller.
OPAL-RT Distributed Multi-User Laboratories
Learn more about OPAL-RT's high-performance distributed multi-user real-time HIL laboratories, part of our Academic and Research offering, optimized to conduct several HIL projects in parallel.
OPAL-RT RT13: Relay testing with HYPERSIM
Relay Testing with HYPERSIM allows for more advanced testing of relays using a simulator rather than traditional open-loop testing. A simulator provides closed-loop testing where the relay response feeds back into the simulation, allowing testing under critical conditions. It offers benefits like evaluating new protection algorithms, studying complex protection schemes, and analyzing interactions between real and virtual relays. Key features include detailed EMT analysis, automation of test sequences, and the ability to simulate faults, disturbances, and communications protocols like IEC 618450.
EC302-Introduction
This document provides an overview of computer aided design (CAD) and circuit simulation. It begins with warnings for the class and then defines CAD as using computers to model physical systems and design variants for manufacturing. It lists several CAD software programs and describes different types of circuit simulations, such as DC analysis and transient analysis. The document outlines the design and simulation process and discusses netlists, elements like sources and passive/active devices, and why simulation is important for verification.
OPAL-RT HYPERSIM Features applied for Relay Testing
This document describes the features and capabilities of HYPERSIM, a real-time simulator from OPAL-RT, for protective relay testing. HYPERSIM allows testing relays in a closed-loop with detailed EMT models, automation of complex test sequences, analysis of relay performance under various faults and interactions, and generation of detailed reports. It supports modeling of power systems, communication protocols like IEC 61850, and integration with other equipment. TestView is used to automate testing, analyze results, and manage test data in databases for archiving. ScopeView and additional analysis tools allow detailed evaluation of relay behavior under different conditions.
14_H00141747_Doula Isham_B30UC_Power System Transient Stability_Poster_2015-16
This document summarizes a student project on analyzing power system transient stability through simulations of three-phase faults. The project involves:
1) Developing MATLAB programs to analyze transient stability for one machine and IEEE 14 bus systems using techniques like equal area criterion and Runge-Kutta.
2) Creating a graphical user interface to allow interactive analysis and training.
3) Testing the tools by simulating three-phase faults at different locations and obtaining critical clearing angles/times to assess stability.
4) Concluding the tools can accurately analyze transient stability and the graphical interface enables better training than traditional methods.
Microprocessors
The document discusses timing diagrams of the 8085 microprocessor and the 8255 Programmable Peripheral Interface (PPI). It provides a timing diagram example for the MVI A, 30H instruction in the 8085. It also explains that the 8255 PPI is a general purpose programmable I/O device that can be used to interface a CPU to external devices like ADCs and DACs. The 8255 has three 8-bit ports (A, B, C) that can be programmed as either inputs or outputs. The 8255 operates in either a bit set/reset mode or input/output mode.
Basic Design and development of drones through mechatronics
It describes the very basic concepts for developing drones and in depth explanation will be provided if any one needed
JosephAnthonyEAlvarez_CV_2016
Joseph Alvarez has over 10 years of experience as an IC development engineer and design verification engineer at ROHM LSI Design Philippines, where he is involved in all stages of IC product development from design to manufacturing and has worked on projects including various memory chips and display drivers. He holds a Bachelor's degree in Electronics and Communications Engineering from Don Bosco Technical College and is skilled in using EDA tools from Cadence and Synopsys for simulation, layout, and verification. In his free time, he enjoys music, boxing, and spending time with his family.
automation,vfd,plc,scada overview
This document presents information on automation topics including variable frequency drives (VFDs), programmable logic controllers (PLCs), and supervisory control and data acquisition (SCADA) systems. It discusses the working and programming of VFDs and PLCs, highlighting their advantages such as improved efficiency and productivity. SCADA systems are described as software that collects and distributes data from remote sensors to control equipment. In conclusion, automation can improve various factors like accuracy, documentation, security, and customer service.
ME8791 Mechatronics (vk-ssm)
This document outlines the course objectives and content for a mechatronics course. It includes 5 units that cover topics such as mechatronics systems, sensors and transducers, microprocessors and microcontrollers, programmable peripheral interfaces, programmable logic controllers, and actuators and mechatronic system design. The course aims to impart knowledge of elements and techniques involved in mechatronic systems to understand the emerging field of automation.
Mechatronics Programmable Logic Controllers
This document discusses programmable logic controllers (PLCs), including their basic structure, input/output processing, and programming. It notes that PLCs process inputs and outputs through programming, with ladder programming being a common technique. Ladder diagrams follow certain conventions, such as each rung defining one operation and starting with an input and ending with an output. Inputs and outputs are identified by their addresses in the PLC's memory.
Model Robotic Arm
The document describes the design and development of a model robotic arm with 3 joints and 4 degrees of freedom. It discusses the design requirements, structural design using CAD modeling, torque analysis of servomotors, material selection of aluminum alloy, and programming of the arm using Matlab Simulink and Stateflow for control. The arm is controlled with an Arduino Mega 2560 microcontroller.
College robotics
This document provides an overview of college robotics projects. It discusses the main applications of robots in industry and outlines the primary sections of robotics projects, including mechanical, electronics, and coding. As an example exercise, it describes a DIY mobile robot project where the robot must transport a toy car between two points. The document then goes into further detail on the mechanical components like the chassis and manipulators, as well as electronics components like sensors and power supply. It provides information on coding topics such as algorithms and integrating functions. The document outlines the process for designing, building, and testing a robot, involving brainstorming sessions, dividing tasks among mechanical, electronics, and coding teams, and debugging solutions.
Ecd302 unit 01(investigate ecad systems)
The document discusses electronic computer-aided design (ECAD) systems. It describes the expectations of learning outcomes related to ECAD, types of ECAD tools for different industries, and categories of ECAD tools according to the design process. It also discusses important features of ECAD systems like schematic capture, simulation, layout design, and verification tools. When choosing an ECAD system, factors to consider include the system requirements, ease of use, component library, available tools, simulation efficiency, and import/export capabilities. The document provides examples of ECAD tools on the market and concludes with critical areas to evaluate for different ECAD systems.
Input - Output Devices for PLC
The document discusses input and output devices used with programmable logic controllers (PLCs). It describes how input modules convert signals from devices like sensors into logic levels for the PLC processor, while output modules convert signals from the processor into levels that can drive devices like motors and valves. A variety of sensors are described that provide digital input signals to PLCs, including switches, encoders, temperature sensors, and smart sensors with integrated circuitry. Common output devices controlled by PLCs include relays, DC motors, solenoid valves, and stepper motors. Examples of PLC applications include conveyor belts, liquid level monitoring, lifts, and robot control systems.
Mechatronics-Introduction to Mechatronics System
This document provides an introduction to mechatronics systems. It discusses key concepts including the definition of mechatronics as the synergistic combination of mechanics, electronics, and control engineering. The document also outlines the key elements of mechatronics such as information systems, electrical systems, sensors, actuators, computer systems, and real-time interfacing. It describes open-loop and closed-loop control systems as well as continuous-time and discrete-time systems. Finally, it compares the traditional approach to engineering design with the mechatronics approach.
Ekt
This document provides syllabus information for the Engineering Knowledge Test (EKT), which is aimed at testing basic engineering knowledge of candidates applying for Aeronautical Engineering courses. It outlines the structure and topics covered in the general engineering section and specialized sections for various disciplines, including Aeronautical Engineering (Mechanical). The general engineering section covers topics such as physics, chemistry, mathematics, computers, electrical engineering, electronics, and mechanical engineering. The Aeronautical Engineering (Mechanical) specialized section covers topics in flight mechanics/aerodynamics, thermodynamics, engineering materials, structures, and propulsion. The test contains both objective and subjective questions and passing both the general and specialized sections is required to qualify for further interviews.
1.me8791 mechatronics
This document outlines the course objectives and content for a course on mechatronics. It includes 5 units: (1) an introduction to mechatronics, sensors, and transducers; (2) microprocessors and microcontrollers; (3) programmable peripheral interfaces; (4) programmable logic controllers; and (5) actuators and mechatronic system design. The document provides details on the topics that will be covered in each unit, such as sensor characteristics, microcontroller architecture, and types of actuators. It also lists the intended learning outcomes and references for the course.
Mechatronics design team project v2
This is a first of a series of presentations illustrating implementation of VDI 2206 guidelines into a five weeks project carried with my colleagues in post graduate course lectured by Dr. Mohamed Abdelaziz.
Mechatronics Introduction
The document discusses an introduction to mechatronics, which is an interdisciplinary field that focuses on integrating mechanical engineering with electronics and computer control systems. It covers topics like the definition of mechatronics, applications in various systems, sensors and transducers, open and closed loop control systems, and performance terminology for systems. The overall goal of the course is to discuss integrating electronics, electrical, computer and control systems with mechanical and sensor technologies.
Intro to mechatronics
This document outlines the course objectives, expected outcomes, syllabus, and content for the ME407 Mechatronics course taught by Sukesh O P. The course aims to introduce sensors used in CNC machines and robots, study MEMS sensors, and develop hydraulic/pneumatic circuits and PLC programs. By the end, students will be able to know mechanical systems in mechatronics and integrate various engineering disciplines in mechatronic design. The syllabus covers introduction to mechatronics, sensors, actuators, MEMS, applications in CNC and robotics.
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
The document discusses mechatronics systems design and provides examples. It defines a motor as an electro-mechanical device that converts electrical to mechanical energy. The document then discusses types of stepper and servo motors, the stages in designing mechatronics systems including need identification, analysis, specification generation, solution evaluation, and implementation. It compares traditional designs using mechanical and hydraulic/pneumatic components to mechatronic designs that integrate electronics, computing, and control systems. Case studies of pick and place robots, engine management systems, and automatic car park barriers are provided to illustrate mechatronics design solutions and system components.
Shishupal plc
This document summarizes a seminar on programmable logic controllers (PLCs) given by electrical engineering students at a university. It provides an introduction to PLCs, covering their history, major components, operational sequence, programming languages including ladder logic, types of PLCs according to inputs/outputs and construction, and examples of using PLCs to start and stop a motor. Applications of PLCs are discussed along with advantages like reliability and flexibility and disadvantages like limited design options. The future scope of PLCs is also covered, with references provided.
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Printed circuit board (PCB) functional tester performs critical validation process performed on manufactured PCBs to verify the board’s functionality meets the original design requirements and specifications. Thorough functional testing helps ensure the reliability and performance of PCBs before deployment.
Testing coverage-
Validate continuity and isolation: Verify electrical connectivity and isolation between traces using in-circuit testing (ICT) and flying probe testing to check for opens and shorts.
Confirm impedance: Match measured impedance of traces and interconnects to design values to prevent signal degradation.
Verify power integrity: Check PCB operation under different power conditions to avoid errors from insufficient power delivery.
Assess signal integrity: Examine signal quality under high-speed conditions to prevent distortion and interference.
Test functionality: Stimulate the PCB with input signals and power to check outputs match expected responses based on design.
Confirm robustness: Subject PCB to temperature cycling, vibration, shock to validate resilience and durability.
Execute regression testing: Retest functionality after modifications to ensure no side effects.
This ppt is based on the working and the making of the control panels
The document discusses Automation & Engineering, a manufacturer of electrical panels. It describes the company's products like power control center panels, motor control center panels, and automatic power factor correction panels. It also outlines the tools, machines, components and processes used to manufacture panels, including testing procedures. The intern gained practical skills in panel manufacturing, operation, maintenance and installation during their time at the company.
Plc example presentation
The document provides information about programmable logic controllers (PLCs). It defines a PLC as a digital computer used to automate electromechanical processes. The document then discusses the key advantages of PLCs like being cost-effective, flexible, and able to operate reliably for years. It also describes the basic architecture of a PLC including input and output modules, a central processing unit, and a programming device. Examples of ladder logic programming are also included to illustrate how PLCs can be programmed to control processes like starting motors in forward and reverse directions.
modern-universal-automatic-test-equipment.pptx
MODERN UNIVERSAL AUTOMATIC TEST EQUIPMENT(MUATE) is an equipment which is used to perform automatic measurements on the device, known as unit under test (UUT), device under test (DUT), and evaluate the test results. An MUATE has a computer controlled system that contains many complex test instruments that are capable of automatically testing and diagnosing faults in intricate electronic components, PCBs, Integrated circuits. It can test a large range of electronic devices and systems from ingenious components like resistors, inductors, capacitors to complex compiled electronic systems. To accomplish this intention, we are harnessing JIG/Fixture/ITAs.
MUATE systems designed to decrease the amount of test time needed to verify a particular PCB, Component, LRU.
MUATE contains Five subsystem
(a) JTAG
(b) Bed of Nails
(c) Boundary scan
(d) Data acquisition system
(e) Controller
JTAG helps users with PCB debugging, prototyping, testing and repairing.
By using the Bed of Nails (ICT-In circuit testing) we can check for short, open, resistance, capacitance, inductance, tracks, and many more
Components, with the help of boundary scan Test device pin signals or internal signals can be monitored in real-time without interfering with normal operation.
Web-based Remote Semiconductors Devices Testing Laboratory
This paper presents the web-based remote
laboratory that will be used as part of the practice for the
Electronic Physics subject at the Electronic Engineering
course of the National University of Rosario, Argentina.
This remote laboratory was developed as a final project of
the course by two students. In this project several
semiconductors devices (diodes, BJT, J-FET, and
phototransistors) can be tested in order to obtain the output
characteristics of each one and to study the behavior in
different conditions. The fact that the user (student) does
not need to install any software to access via Internet and
the low cost for implementation of the laboratory, are the
most outstanding advantages of this Lab.
PLC, DCS and PLC vs DCS Presentation by Jitender Singh Shekhawat
The document provides information about programmable logic controllers (PLCs) and distributed control systems (DCSs). It discusses the history and components of PLCs, including the central processing unit, input and output modules, power supply, and programming languages. DCSs are described as systems that divide plant control into areas managed by individual controllers connected by a communication network. Key advantages of DCSs include reliability, redundancy, flexibility in configuration, and ease of maintenance. The document compares PLCs and DCSs, noting that DCSs are more suitable for large-scale, complex plant control applications.
More Related Content
What's hot
JosephAnthonyEAlvarez_CV_2016
Joseph Alvarez has over 10 years of experience as an IC development engineer and design verification engineer at ROHM LSI Design Philippines, where he is involved in all stages of IC product development from design to manufacturing and has worked on projects including various memory chips and display drivers. He holds a Bachelor's degree in Electronics and Communications Engineering from Don Bosco Technical College and is skilled in using EDA tools from Cadence and Synopsys for simulation, layout, and verification. In his free time, he enjoys music, boxing, and spending time with his family.
automation,vfd,plc,scada overview
This document presents information on automation topics including variable frequency drives (VFDs), programmable logic controllers (PLCs), and supervisory control and data acquisition (SCADA) systems. It discusses the working and programming of VFDs and PLCs, highlighting their advantages such as improved efficiency and productivity. SCADA systems are described as software that collects and distributes data from remote sensors to control equipment. In conclusion, automation can improve various factors like accuracy, documentation, security, and customer service.
ME8791 Mechatronics (vk-ssm)
This document outlines the course objectives and content for a mechatronics course. It includes 5 units that cover topics such as mechatronics systems, sensors and transducers, microprocessors and microcontrollers, programmable peripheral interfaces, programmable logic controllers, and actuators and mechatronic system design. The course aims to impart knowledge of elements and techniques involved in mechatronic systems to understand the emerging field of automation.
Mechatronics Programmable Logic Controllers
This document discusses programmable logic controllers (PLCs), including their basic structure, input/output processing, and programming. It notes that PLCs process inputs and outputs through programming, with ladder programming being a common technique. Ladder diagrams follow certain conventions, such as each rung defining one operation and starting with an input and ending with an output. Inputs and outputs are identified by their addresses in the PLC's memory.
Model Robotic Arm
The document describes the design and development of a model robotic arm with 3 joints and 4 degrees of freedom. It discusses the design requirements, structural design using CAD modeling, torque analysis of servomotors, material selection of aluminum alloy, and programming of the arm using Matlab Simulink and Stateflow for control. The arm is controlled with an Arduino Mega 2560 microcontroller.
College robotics
This document provides an overview of college robotics projects. It discusses the main applications of robots in industry and outlines the primary sections of robotics projects, including mechanical, electronics, and coding. As an example exercise, it describes a DIY mobile robot project where the robot must transport a toy car between two points. The document then goes into further detail on the mechanical components like the chassis and manipulators, as well as electronics components like sensors and power supply. It provides information on coding topics such as algorithms and integrating functions. The document outlines the process for designing, building, and testing a robot, involving brainstorming sessions, dividing tasks among mechanical, electronics, and coding teams, and debugging solutions.
Ecd302 unit 01(investigate ecad systems)
The document discusses electronic computer-aided design (ECAD) systems. It describes the expectations of learning outcomes related to ECAD, types of ECAD tools for different industries, and categories of ECAD tools according to the design process. It also discusses important features of ECAD systems like schematic capture, simulation, layout design, and verification tools. When choosing an ECAD system, factors to consider include the system requirements, ease of use, component library, available tools, simulation efficiency, and import/export capabilities. The document provides examples of ECAD tools on the market and concludes with critical areas to evaluate for different ECAD systems.
Input - Output Devices for PLC
The document discusses input and output devices used with programmable logic controllers (PLCs). It describes how input modules convert signals from devices like sensors into logic levels for the PLC processor, while output modules convert signals from the processor into levels that can drive devices like motors and valves. A variety of sensors are described that provide digital input signals to PLCs, including switches, encoders, temperature sensors, and smart sensors with integrated circuitry. Common output devices controlled by PLCs include relays, DC motors, solenoid valves, and stepper motors. Examples of PLC applications include conveyor belts, liquid level monitoring, lifts, and robot control systems.
Mechatronics-Introduction to Mechatronics System
This document provides an introduction to mechatronics systems. It discusses key concepts including the definition of mechatronics as the synergistic combination of mechanics, electronics, and control engineering. The document also outlines the key elements of mechatronics such as information systems, electrical systems, sensors, actuators, computer systems, and real-time interfacing. It describes open-loop and closed-loop control systems as well as continuous-time and discrete-time systems. Finally, it compares the traditional approach to engineering design with the mechatronics approach.
Ekt
This document provides syllabus information for the Engineering Knowledge Test (EKT), which is aimed at testing basic engineering knowledge of candidates applying for Aeronautical Engineering courses. It outlines the structure and topics covered in the general engineering section and specialized sections for various disciplines, including Aeronautical Engineering (Mechanical). The general engineering section covers topics such as physics, chemistry, mathematics, computers, electrical engineering, electronics, and mechanical engineering. The Aeronautical Engineering (Mechanical) specialized section covers topics in flight mechanics/aerodynamics, thermodynamics, engineering materials, structures, and propulsion. The test contains both objective and subjective questions and passing both the general and specialized sections is required to qualify for further interviews.
1.me8791 mechatronics
This document outlines the course objectives and content for a course on mechatronics. It includes 5 units: (1) an introduction to mechatronics, sensors, and transducers; (2) microprocessors and microcontrollers; (3) programmable peripheral interfaces; (4) programmable logic controllers; and (5) actuators and mechatronic system design. The document provides details on the topics that will be covered in each unit, such as sensor characteristics, microcontroller architecture, and types of actuators. It also lists the intended learning outcomes and references for the course.
Mechatronics design team project v2
This is a first of a series of presentations illustrating implementation of VDI 2206 guidelines into a five weeks project carried with my colleagues in post graduate course lectured by Dr. Mohamed Abdelaziz.
Mechatronics Introduction
The document discusses an introduction to mechatronics, which is an interdisciplinary field that focuses on integrating mechanical engineering with electronics and computer control systems. It covers topics like the definition of mechatronics, applications in various systems, sensors and transducers, open and closed loop control systems, and performance terminology for systems. The overall goal of the course is to discuss integrating electronics, electrical, computer and control systems with mechanical and sensor technologies.
Intro to mechatronics
This document outlines the course objectives, expected outcomes, syllabus, and content for the ME407 Mechatronics course taught by Sukesh O P. The course aims to introduce sensors used in CNC machines and robots, study MEMS sensors, and develop hydraulic/pneumatic circuits and PLC programs. By the end, students will be able to know mechanical systems in mechatronics and integrate various engineering disciplines in mechatronic design. The syllabus covers introduction to mechatronics, sensors, actuators, MEMS, applications in CNC and robotics.
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
The document discusses mechatronics systems design and provides examples. It defines a motor as an electro-mechanical device that converts electrical to mechanical energy. The document then discusses types of stepper and servo motors, the stages in designing mechatronics systems including need identification, analysis, specification generation, solution evaluation, and implementation. It compares traditional designs using mechanical and hydraulic/pneumatic components to mechatronic designs that integrate electronics, computing, and control systems. Case studies of pick and place robots, engine management systems, and automatic car park barriers are provided to illustrate mechatronics design solutions and system components.
Shishupal plc
This document summarizes a seminar on programmable logic controllers (PLCs) given by electrical engineering students at a university. It provides an introduction to PLCs, covering their history, major components, operational sequence, programming languages including ladder logic, types of PLCs according to inputs/outputs and construction, and examples of using PLCs to start and stop a motor. Applications of PLCs are discussed along with advantages like reliability and flexibility and disadvantages like limited design options. The future scope of PLCs is also covered, with references provided.
What's hot (16)
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
Unit 5-ACTUATORS AND MECHATRONIC SYSTEM DESIGN-ME6702– MECHATRONICS
Similar to Ict fct testing for pcba
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Printed circuit board (PCB) functional tester performs critical validation process performed on manufactured PCBs to verify the board’s functionality meets the original design requirements and specifications. Thorough functional testing helps ensure the reliability and performance of PCBs before deployment.
Testing coverage-
Validate continuity and isolation: Verify electrical connectivity and isolation between traces using in-circuit testing (ICT) and flying probe testing to check for opens and shorts.
Confirm impedance: Match measured impedance of traces and interconnects to design values to prevent signal degradation.
Verify power integrity: Check PCB operation under different power conditions to avoid errors from insufficient power delivery.
Assess signal integrity: Examine signal quality under high-speed conditions to prevent distortion and interference.
Test functionality: Stimulate the PCB with input signals and power to check outputs match expected responses based on design.
Confirm robustness: Subject PCB to temperature cycling, vibration, shock to validate resilience and durability.
Execute regression testing: Retest functionality after modifications to ensure no side effects.
This ppt is based on the working and the making of the control panels
The document discusses Automation & Engineering, a manufacturer of electrical panels. It describes the company's products like power control center panels, motor control center panels, and automatic power factor correction panels. It also outlines the tools, machines, components and processes used to manufacture panels, including testing procedures. The intern gained practical skills in panel manufacturing, operation, maintenance and installation during their time at the company.
Plc example presentation
The document provides information about programmable logic controllers (PLCs). It defines a PLC as a digital computer used to automate electromechanical processes. The document then discusses the key advantages of PLCs like being cost-effective, flexible, and able to operate reliably for years. It also describes the basic architecture of a PLC including input and output modules, a central processing unit, and a programming device. Examples of ladder logic programming are also included to illustrate how PLCs can be programmed to control processes like starting motors in forward and reverse directions.
modern-universal-automatic-test-equipment.pptx
MODERN UNIVERSAL AUTOMATIC TEST EQUIPMENT(MUATE) is an equipment which is used to perform automatic measurements on the device, known as unit under test (UUT), device under test (DUT), and evaluate the test results. An MUATE has a computer controlled system that contains many complex test instruments that are capable of automatically testing and diagnosing faults in intricate electronic components, PCBs, Integrated circuits. It can test a large range of electronic devices and systems from ingenious components like resistors, inductors, capacitors to complex compiled electronic systems. To accomplish this intention, we are harnessing JIG/Fixture/ITAs.
MUATE systems designed to decrease the amount of test time needed to verify a particular PCB, Component, LRU.
MUATE contains Five subsystem
(a) JTAG
(b) Bed of Nails
(c) Boundary scan
(d) Data acquisition system
(e) Controller
JTAG helps users with PCB debugging, prototyping, testing and repairing.
By using the Bed of Nails (ICT-In circuit testing) we can check for short, open, resistance, capacitance, inductance, tracks, and many more
Components, with the help of boundary scan Test device pin signals or internal signals can be monitored in real-time without interfering with normal operation.
Web-based Remote Semiconductors Devices Testing Laboratory
This paper presents the web-based remote
laboratory that will be used as part of the practice for the
Electronic Physics subject at the Electronic Engineering
course of the National University of Rosario, Argentina.
This remote laboratory was developed as a final project of
the course by two students. In this project several
semiconductors devices (diodes, BJT, J-FET, and
phototransistors) can be tested in order to obtain the output
characteristics of each one and to study the behavior in
different conditions. The fact that the user (student) does
not need to install any software to access via Internet and
the low cost for implementation of the laboratory, are the
most outstanding advantages of this Lab.
PLC, DCS and PLC vs DCS Presentation by Jitender Singh Shekhawat
The document provides information about programmable logic controllers (PLCs) and distributed control systems (DCSs). It discusses the history and components of PLCs, including the central processing unit, input and output modules, power supply, and programming languages. DCSs are described as systems that divide plant control into areas managed by individual controllers connected by a communication network. Key advantages of DCSs include reliability, redundancy, flexibility in configuration, and ease of maintenance. The document compares PLCs and DCSs, noting that DCSs are more suitable for large-scale, complex plant control applications.
IRJET- Fuzzy Logic based Fault Detection in Induction Machines using Cloud
This document presents a system for online condition monitoring of induction motors using fuzzy logic and cloud computing. It involves two phases:
1) Developing a simulation model in MATLAB/Simulink to monitor motor parameters and detect faults.
2) Implementing an online condition monitoring system using a Raspberry Pi, sensors to measure motor vibrations, temperature etc., and a cloud platform to remotely store and access data in real-time.
Fuzzy logic is used to analyze sensor data and detect faults based on defined rules and membership functions. The system aims to monitor key parameters of induction motors and identify failures to enable safe and efficient operation in industrial applications.
ppt (6).pptx
This document describes the design of an automatic phase selector system. The system continuously monitors the three input phases and connects the load to the active phase using a relay. If one phase fails, the load is automatically switched to another available phase within seconds. The system aims to provide uninterrupted power to critical loads in the event of a phase failure. It uses a microcontroller to check phase availability and control the relay switching. The system was tested successfully and provides reliable phase switching without requiring a backup power source.
IRJET- Automation in Substation using Programmable Logic Controller (PLC)
This document discusses automating a substation using a Programmable Logic Controller (PLC). It begins with an introduction to increasing power demands globally and the need for automation in power systems. The document then provides details on PLC architecture and components, presents a connection diagram of an automated substation system using PLC and sensors, and describes the ladder logic programming. The automated substation system is able to detect faults and open circuit breakers without human intervention to prevent losses and equipment damage. In conclusion, the author states that automation improves transmission and distribution systems by reducing wasted energy and damage during faults.
Monitoring and Controlling of BLDC motor using IOT
Brushless Direct Current motors are synchronous motors which operates on DC current. These motors have various advantages over Brushed DC motors such as low cost, high speed torque characteristics, noise less operation. Speed controlling is Very important. Speed of the motor is controlled by (ESC) electronic speed controlled. The parameters like Speed, Current, Power, Temperature and Voltage are Monitored on from remote access through the configured electronic gadgets by using the Internet Of things. the purpose of this project is to control and monitor the of Brushless DC (BLDC) motor by using IOT. The Internet of Things (IOT) has led to huge development in digital world. IOT is interface that helps communication between objects Brushless DC Motor (BLDCM) has various features like high efficiency, reliability, high weight to torque ratio. Hence these motors have major significances in the industries. By utilizing this IOT, controlling and monitoring of a system is done to obtain desired output.
Eee3420 lecture02 rev2011
This document provides an overview of the EEC3420 Industrial Control course. It discusses Programmable Logic Controllers (PLCs), including their hardware components, operating principles, background and advantages over traditional relay logic systems. The document also describes typical PLC applications, inputs/outputs, programming languages according to international standards, and the internal working cycle of a PLC.
Electrical Rule Check Verification Methodology For SoC
This document discusses electrical rule check (ERC) verification methodology for system-on-chip (SoC) designs. ERC is performed at the full chip level to verify that primitives are placed in the correct power domains and to avoid functional or reliability issues. ERC checks for violations related to device domains/power connections and floating nodes. Powerup sequence simulation is also performed using Finesim to analyze the powerup sequence of different modules in the full chip design when power is applied. The ERC methodology involves generating a SPICE netlist, setting up ERC parameters, loading an ERC tool to detect violations, and reviewing the results. Powerup simulation ensures modules respond accurately during power application.
Digital Testing Kit For Three Phase Distribution Transformer
This document describes the design of a digital testing kit for three phase distribution transformers. The kit performs tests on repaired transformers to determine if they are ready for use. It measures parameters like voltage, current, power factor and efficiency. The kit components include current and potential transformers to step down voltages and currents, a zero crossing detector to measure phase differences, and a PIC microcontroller for processing measurements. Test results for a sample 5kVA transformer are presented, showing the kit can accurately measure parameters like iron losses, copper losses and efficiency. The calculated and observed efficiency values matched closely, demonstrating the effectiveness of the digital testing kit.
E044081720
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Eee3420 lecture02 rev2011
This document provides an overview of programmable logic controllers (PLCs) and their hardware components. It discusses the basic components of a PLC including the power supply, central processing unit, input/output terminals, and indicator lights. It also describes common input and output devices used with PLCs such as sensors, actuators, and relays. The document discusses how inputs are connected to a PLC and converted to a format readable by its logic. It also describes how PLCs convert internal logic levels to external voltage levels on the outputs. Finally, it summarizes key aspects of PLC hardware and wiring.
International Journal of Engineering Research and Development
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Dp32725728
This document summarizes a paper that designed and implemented fuzzy logic controllers for DC motor speed control using MATLAB-GUI. The authors developed hardware to interface a DC motor with a computer. They designed fuzzy logic controllers and integrated fuzzy logic controllers in MATLAB to control the motor speed. The MATLAB GUI allows tuning controller parameters in real-time and observing the motor performance. Experimental results showed the integrated fuzzy logic controller provided better performance than the fuzzy logic controller in terms of rise time, settling time, overshoot and undershoot for speed control applications.
Implementation and Controlling of Electrical Appliances by using Bluetooth
This document describes a proposed system for implementing and controlling electrical appliances using Bluetooth technology. The proposed system allows users to monitor and operate devices connected over a Bluetooth network from within Bluetooth range. It discusses the existing manual control systems and outlines the components of the proposed automated system, including a microcontroller connected to a Bluetooth module to receive control signals from an Android mobile device. The system then uses relays to operate loads like lamps and fans based on the user commands. It provides schematics, advantages and results of testing different control commands to operate the electrical appliances over Bluetooth. Future scopes to improve the system's range and circuit board design are also mentioned.
Seminar report on national instruments electronics workbench
electronic workbench is circuit simulation software,use to design,analyse a circuit virtually without using actual components
IRJET- Control Strategy of Induction Motor Drive by using Universal Controlle...
This document discusses controlling the speed of an induction motor using a universal controller and pulse width modulation inverter. It describes using an Arduino Mega 2560 microcontroller to generate PWM signals that control MOSFETs in an inverter. The inverter converts DC power to a variable frequency AC output to drive the induction motor at variable speeds. Simulation results in MATLAB showed the system could successfully control motor speed from zero to nominal speed by varying the inverter output frequency. The system was also implemented in hardware with an Arduino, MOSFET inverter and induction motor, demonstrating effective speed control under varying load conditions.
Similar to Ict fct testing for pcba (20)
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx
This ppt is based on the working and the making of the control panels
This ppt is based on the working and the making of the control panels
Web-based Remote Semiconductors Devices Testing Laboratory
Web-based Remote Semiconductors Devices Testing Laboratory
PLC, DCS and PLC vs DCS Presentation by Jitender Singh Shekhawat
PLC, DCS and PLC vs DCS Presentation by Jitender Singh Shekhawat
IRJET- Fuzzy Logic based Fault Detection in Induction Machines using Cloud
IRJET- Fuzzy Logic based Fault Detection in Induction Machines using Cloud
IRJET- Automation in Substation using Programmable Logic Controller (PLC)
IRJET- Automation in Substation using Programmable Logic Controller (PLC)
Monitoring and Controlling of BLDC motor using IOT
Monitoring and Controlling of BLDC motor using IOT
Electrical Rule Check Verification Methodology For SoC
Electrical Rule Check Verification Methodology For SoC
Digital Testing Kit For Three Phase Distribution Transformer
Digital Testing Kit For Three Phase Distribution Transformer
International Journal of Engineering Research and Development
International Journal of Engineering Research and Development
Implementation and Controlling of Electrical Appliances by using Bluetooth
Implementation and Controlling of Electrical Appliances by using Bluetooth
Seminar report on national instruments electronics workbench
Seminar report on national instruments electronics workbench
IRJET- Control Strategy of Induction Motor Drive by using Universal Controlle...
IRJET- Control Strategy of Induction Motor Drive by using Universal Controlle...
Recently uploaded
We’re Underestimating the Damage Extreme Weather Does to Rooftop Solar Panels
Grid Freedom is the best solar leads company based in New Jersey that provides Exclusive solar appointments of qualified solar appointments for guaranteed solar appointments for the best way to get solar leads throughout the nation. Grid Freedom is a solar lead provider, that connects exclusive pre-set appointments with pre-screened homeowners who are ready for solar company leads. The solar lead generators company was founded to provide solar appointment leads contractors with better solar sales leads-buying high-quality exclusive solar leads experience that gives pre-set solar appointments great ROI.
Call Girls Hyderabad (india) ☎️ +91-7426014248 Hyderabad Call Girl
Call Girls Hyderabad (india) ☎️ +91-7426014248 Hyderabad Call Girl
一比一原版(aiti毕业证书)澳洲悉尼翻译学院毕业证如何办理
原版一模一样【微信：741003700 】【(aiti毕业证书)澳洲悉尼翻译学院毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(aiti毕业证书)澳洲悉尼翻译学院毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"
In iOS 18, Apple has introduced a significant revamp to the Control Centre, making it more intuitive and user-friendly. One of the standout features is a quicker and more accessible way to shut down your iPhone. This enhancement aims to streamline the user experience, allowing for faster access to essential functions. Discover how iOS 18's redesigned Control Centre can simplify your daily interactions with your iPhone, bringing convenience right at your fingertips.
欧洲杯投注-欧洲杯投注押注app-欧洲杯投注押注app官网|【网址🎉ac10.net🎉】
【网址🎉ac10.net🎉】欧洲杯投注在多数英超比赛球场都设有投注点，其业务现已扩展到西班牙。欧洲杯投注支持19种语言和货币。更为重要的是，欧洲杯投注使用市场上最为先进的安全系统，为用户提供全年365天，每天24小时的专业服务。
一比一原版办理（Caltech毕业证)加州理工学院毕业证
一比一原版出售【微信：176555708】【《加州理工学院毕业证》(Caltech学位证成绩单)】【微信：176555708】(留信学历认证永久存档查询)采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：176555708】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理加州理工学院毕业证（Caltech学位证）学位证【微信：176555708 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
Call Girls in Noida (Uttar Pradesh ) call me [🔝9899900591🔝] Escort In Noida s...
Call Girls in Noida (Uttar Pradesh ) call me [🔝9899900591🔝] Escort In Noida service 24X7
按照学校原版(UPenn文凭证书)宾夕法尼亚大学毕业证快速办理
办理【(UPenn毕业证书)宾夕法尼亚大学毕业证】【176555708微信号】存档可查的成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Ahmedabad ℂall Girl Book 🤑 7488326553 🤑 ℂall Girl Service In Ahmedabad
Ahmedabad ℂall Girl Book 🤑 7488326553 🤑 ℂall Girl Service In Ahmedabad
一比一原版不列颠哥伦比亚大学毕业证(UBC毕业证书)学历如何办理
快速办理【微信号:176555708】【快速办理(UBC毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯体彩-欧洲杯体彩比赛投注-欧洲杯体彩比赛投注官网|【网址🎉ac99.net🎉】
【网址🎉ac99.net🎉】欧洲杯体彩是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯体彩。欧洲杯体彩现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
Company Profile of Tempcon - Chiller Manufacturer In India
This is the company profile of Tempcon - chiller manufacturer in India. Tempcon manufactures water cooled and air cooled chillers and industrial AC. The company has been in the business since 1983.
website: https://www.tempcon.co.in/
一比一原版西三一大学毕业证(TWU毕业证书)学历如何办理
加急办理【微信号:176555708】【加急办理(TWU毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(SBU毕业证书)肯特州立大学毕业证如何办理
原版办理【微信号:BYZS866】【(SBU毕业证书)肯特州立大学毕业证】【微信号:BYZS866】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【关于学历材料质量】
我们承诺采用的是学校原版纸张（原版纸质、底色、纹路）我们工厂拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有成品以及工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
世预赛投注-世预赛投注投注官网app-世预赛投注官网app下载|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】世预赛投注是世界上最大的网上博彩公司之一，于直布罗陀注册，在200个国家拥有超过3500万客户。在国际上都可以称得上是极其优秀的博彩公司。总部位于英国Stoke-on-Trent，世预赛投注在世界各地的雇员超过600名。该公司登录亚洲市场多年，近年针对亚洲的市场拓展的很快。它的特点是投注赔率富于变化，同时对于冷门赛事，赔率变化幅度会大于其它博彩公司。世预赛投注在终赔阶段往往向立博、韦德等靠拢，一旦差异很大，往往会出现问题。
欧洲杯赌钱-欧洲杯赌钱冠军-欧洲杯赌钱冠军赔率|【网址🎉ac10.net🎉】
【网址🎉ac10.net🎉】欧洲杯赌钱是世界上最大的网上博彩公司之一，于直布罗陀注册，在200个国家拥有超过3500万客户。在国际上都可以称得上是极其优秀的博彩公司。总部位于英国Stoke-on-Trent，欧洲杯赌钱在世界各地的雇员超过600名。该公司登录亚洲市场多年，近年针对亚洲的市场拓展的很快。它的特点是投注赔率富于变化，同时对于冷门赛事，赔率变化幅度会大于其它博彩公司。欧洲杯赌钱在终赔阶段往往向立博、韦德等靠拢，一旦差异很大，往往会出现问题。
一比一原版圣托马斯大学毕业证(UST毕业证书)学历如何办理
精仿办理【微信号:176555708】【精仿办理(UST毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
The Future of Wearable Technology in Healthcare: Innovations and Trends to Watch
As wearable technology continues to shape multiple facets of our lives, its potential in healthcare is becoming increasingly apparent. With the rapid advancement of technology, the integration of wearables into healthcare systems worldwide is accelerating. In this evolving field, we delve into the latest innovations and trends that are transforming healthcare.
Recently uploaded (19)
We’re Underestimating the Damage Extreme Weather Does to Rooftop Solar Panels
We’re Underestimating the Damage Extreme Weather Does to Rooftop Solar Panels
Call Girls Hyderabad (india) ☎️ +91-7426014248 Hyderabad Call Girl
Call Girls Hyderabad (india) ☎️ +91-7426014248 Hyderabad Call Girl
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"
"IOS 18 CONTROL CENTRE REVAMP STREAMLINED IPHONE SHUTDOWN MADE EASIER"
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
ℂall Girls Kolkata 😍 Call 0000000 Vip Escorts Service Kolkata
Call Girls in Noida (Uttar Pradesh ) call me [🔝9899900591🔝] Escort In Noida s...
Call Girls in Noida (Uttar Pradesh ) call me [🔝9899900591🔝] Escort In Noida s...
Ahmedabad ℂall Girl Book 🤑 7488326553 🤑 ℂall Girl Service In Ahmedabad
Ahmedabad ℂall Girl Book 🤑 7488326553 🤑 ℂall Girl Service In Ahmedabad
Company Profile of Tempcon - Chiller Manufacturer In India
Company Profile of Tempcon - Chiller Manufacturer In India
世预赛投注-世预赛投注投注官网app-世预赛投注官网app下载|【网址🎉ac123.net🎉】
世预赛投注-世预赛投注投注官网app-世预赛投注官网app下载|【网址🎉ac123.net🎉】
The Future of Wearable Technology in Healthcare: Innovations and Trends to Watch
The Future of Wearable Technology in Healthcare: Innovations and Trends to Watch
Ict fct testing for pcba
- 1. ICT is a relatively simple simulation of PCBA. It is mainly used to check component failures and soldering failures. It is carried out during the process of board soldering. The problematic board (such as components wrong direction, short circuit etc.) is directly reworked on the soldering line. ICT is an automatic online test equipment for PCBA (printed circuit board assembly) production, which is necessary for modern electronics companies. It was widely used, with high measurement accuracy, and clear instructions for detected problems. Even workers with low electronic skills can easily handle problematic PCBA. FCT is an electronic and electrical functional test, that is, after completing the ICT test steps, it is switched to the product power-on state to test the parameters of the product under normalworking environment. The advantage of this is that you can directly see if the production is work or not. FCT (Functional Test) refers to providing a simulated operating environment to the test target board (UUT: Unit Under Test) to make it work in various design states, so as to obtain the parameters of each state to verify the UUT function is good or bad. Simply speaking, it is after PCBA programmed, load the UUT with appropriate voltage and current, measure whether the output response is correct. Generally refers to the functional test of PCBA. The difference is that ICT mainly detects whether the components of the circuit board are installed correctly, and if the parameter of test points are normal, while FCT mainly detects whether the function of the circuit board is normal. China PCBA factory SysPCB(www.syspcb.com) provide professional PCBA manufacturing and testing for customers, welcome your inquiry, sales@syspcb.com