The document provides information on program controllers for operating RCS2 series actuators. The controllers can handle various controls for one or two axes. They support up to 20,000 positioning points and allow for functions like push-motion operation, teaching operation, and path operations when two axes are connected. The document outlines the specifications and I/O functions of the SSEL controller model.
The document describes a program controller for operating RCA2/RCA series actuators. The controller can handle various controls for a single or dual axis system. It supports up to 1500 positioning points and can perform functions like linear/arc interpolation, path operations, and teaching operations through a programmed control mode or PLC input signals in a positioner mode. Key specifications of the controller include support for up to two motor axes, 1500 positioning points, and integrated operation and communication capabilities.
The document describes a PSEL controller for operating RCP3/RCP2 series actuators. The controller combines various control functions into a single unit. It can handle operation and communication with one controller for up to two axes. It supports up to 1500 positioning points and functions like path operations and teaching operation.
The document provides information about SCON controllers, including:
- There are standard and network specifications, with incremental and absolute options. Only incremental is available for pulse train input.
- It lists motor, encoder, I/O cable length, power/voltage options. Network connection specifications are also optional.
- Control can be performed via PIO, pulse train, or connecting to a field network depending on the specification. Positioning of up to 512 points is possible in positioner or solenoid valve modes.
The document describes the XSEL series of multi-axis program controllers for operating RCS2 Series actuators. It provides details on controller types and models, specifications for motors, I/O, networking options, and compatible actuators. The controllers can simultaneously control up to 6 axes and are available in basic, standard, and large-capacity configurations to suit different application needs.
The PWR-01 is a series of high performance, multifunctional, compact, wide-range DC power supplies. It consists of 16 models in total with 4 maximum voltage outputs (L, ML, MH, and H) and 4 maximum power outputs (400 W, 800 W, 1200 W and 2000 W). The series is equipped with LAN (LXI), USB, and RS232C as standard interfaces that are essential for system integration. The PWR-01 also features front-facing output terminals, variable internal resistance, bleeder ON/OFF functions, CC/CV priority switching function, synchronized operation, various protections, and programmable internal memory.
https://www.n-denkei.com/singapore/inquiry/
The document discusses PSEP/ASEP controllers which are 3-position controllers for pulse and servo motors. Key features of the controllers include:
1. Operating with the same signals as solenoid valves for compatibility with existing PLC programs.
2. Having a dustproof type with IP53 protection for outdoor mounting.
3. Providing a simple absolute type that can store position on power-up and start from that position.
4. Allowing for pushing operation and intermediate stopping like air cylinders.
5. Having an optional touch panel teaching unit for intuitive data entry without manuals.
The document provides information on available controller models, compatible actuators and cables, and accessories like teaching
The document discusses the P-Driver pulse-train input driver that enables flexible control of IAI's ROBO CYLINDER actuators and single-axis robots. The P-Driver can control a wide range of actuators with various options and functions including torque limiting, brake control, feedback, and feed-forward control. It connects to actuators, provides power connections, and includes status indicators and connectors for communication, I/O signals, and encoders.
This document provides information on the ACON position controller models C/CG/CY/PL/PO/SE. It lists the 5 controller types and their functions. The C/CG types are positioner controllers that can control up to 512 positioning points. The CY type controls solenoid valves. The PL/PO types use pulse train control. The SE type uses serial communication. Peripheral devices, cables, and the I/O specifications are also described.
The document describes a program controller for operating RCA2/RCA series actuators. The controller can handle various controls for a single or dual axis system. It supports up to 1500 positioning points and can perform functions like linear/arc interpolation, path operations, and teaching operations through a programmed control mode or PLC input signals in a positioner mode. Key specifications of the controller include support for up to two motor axes, 1500 positioning points, and integrated operation and communication capabilities.
The document describes a PSEL controller for operating RCP3/RCP2 series actuators. The controller combines various control functions into a single unit. It can handle operation and communication with one controller for up to two axes. It supports up to 1500 positioning points and functions like path operations and teaching operation.
The document provides information about SCON controllers, including:
- There are standard and network specifications, with incremental and absolute options. Only incremental is available for pulse train input.
- It lists motor, encoder, I/O cable length, power/voltage options. Network connection specifications are also optional.
- Control can be performed via PIO, pulse train, or connecting to a field network depending on the specification. Positioning of up to 512 points is possible in positioner or solenoid valve modes.
The document describes the XSEL series of multi-axis program controllers for operating RCS2 Series actuators. It provides details on controller types and models, specifications for motors, I/O, networking options, and compatible actuators. The controllers can simultaneously control up to 6 axes and are available in basic, standard, and large-capacity configurations to suit different application needs.
The PWR-01 is a series of high performance, multifunctional, compact, wide-range DC power supplies. It consists of 16 models in total with 4 maximum voltage outputs (L, ML, MH, and H) and 4 maximum power outputs (400 W, 800 W, 1200 W and 2000 W). The series is equipped with LAN (LXI), USB, and RS232C as standard interfaces that are essential for system integration. The PWR-01 also features front-facing output terminals, variable internal resistance, bleeder ON/OFF functions, CC/CV priority switching function, synchronized operation, various protections, and programmable internal memory.
https://www.n-denkei.com/singapore/inquiry/
The document discusses PSEP/ASEP controllers which are 3-position controllers for pulse and servo motors. Key features of the controllers include:
1. Operating with the same signals as solenoid valves for compatibility with existing PLC programs.
2. Having a dustproof type with IP53 protection for outdoor mounting.
3. Providing a simple absolute type that can store position on power-up and start from that position.
4. Allowing for pushing operation and intermediate stopping like air cylinders.
5. Having an optional touch panel teaching unit for intuitive data entry without manuals.
The document provides information on available controller models, compatible actuators and cables, and accessories like teaching
The document discusses the P-Driver pulse-train input driver that enables flexible control of IAI's ROBO CYLINDER actuators and single-axis robots. The P-Driver can control a wide range of actuators with various options and functions including torque limiting, brake control, feedback, and feed-forward control. It connects to actuators, provides power connections, and includes status indicators and connectors for communication, I/O signals, and encoders.
This document provides information on the ACON position controller models C/CG/CY/PL/PO/SE. It lists the 5 controller types and their functions. The C/CG types are positioner controllers that can control up to 512 positioning points. The CY type controls solenoid valves. The PL/PO types use pulse train control. The SE type uses serial communication. Peripheral devices, cables, and the I/O specifications are also described.
The document provides information about the E1100 Servo Controller Series from NTI AG / LinMot. The E1100 series includes various servo controller models for controlling 1, 2, or 3 phase linear or rotary motors. The controllers offer integrated digital position control and interfacing to machine controls via digital interfaces like PROFIBUS-DP, DeviceNet, and CANopen. Key features include storing motion sequences and profiles, synchronization to a master encoder, digital and analog inputs/outputs, and flexible connectivity options.
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
The document describes a 3-position controller for pneumatic cylinders that can be replaced with a ROBO cylinder. The controller has inputs to control positioning to up to 3 positions - home, intermediate, and end. It connects to a PC to configure settings like acceleration, speed, and intermediate positions using free software. Replacing pneumatic cylinders with ROBO cylinders allows maintaining the same PLC programming while gaining features like adjustable speed and intermediate stopping.
Bien tan ls gioi thieu bien tan i c5 series-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Ls catalog thiet bi tu dong i s5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Mitsubishi inverter freqrol-a701 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
Mitsubishi inverter inverter family dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
The PLZ-5WH2 high power DC electronic load series is where durable, reliable ingenuity meets multifunctional and high power design. Providing 5 variety of power range line-ups, from 1 kW bench top style model to high power model that can sink up to 20 kW of power in a single unit. Possible to easily selects applicable power range depends on the load. Load simulation can be achieved faster than ever before thanks to the reliable, high speed design of the PLZ-5WH current control circuits. Accurate current measures can be made with extremely high setting resolution. A color LCD display allows for highly visible, user-friendly front panel operation. RS232C, USB, and LAN digital interfaces are included as standard for simple integration into any system.
Constant current (CC) mode When a current value is specified, the current is kept at that value even when the voltage changes.
Constant resistance (CR) mode When a conductance value is specified, the product sinks current proportio-nal to the voltage variation by using the value as a proportionality constant.
Constant voltage (CV) mode When a voltage value is specified, the product runs the current so that the voltage is kept at that value.
Constant power (CP) mode When a power value is specified, the product runs the current so that the power is kept at that value.
Arbitrary I-V charac-teristics (ARB) mode The desired load characteristics can be set by specifying multiple arbitrary voltage values and current values as I-V characteristics.
The PLZ-5WH2 high power DC electronic load series is where durable, reliable ingenuity meets multifunctional and high power design. Providing 5 variety of power range line-ups, from 1 kW bench top style model to high power model that can sink up to 20 kW of power in a single unit. Possible to easily selects applicable power range depends on the load. Load simulation can be achieved faster than ever before thanks to the reliable, high speed design of the PLZ-5WH current control circuits. Accurate current measures can be made with extremely high setting resolution. A color LCD display allows for highly visible, user-friendly front panel operation. RS232C, USB, and LAN digital interfaces are included as standard for simple integration into any system.
Operation Modes
The following five operation modes are available on the PLZ-5WH2. In addition, available to set in operation modes other than CV mode, the “UVPL*” setting keep the voltage less than UVP setting by controlling the current and the “UVPT” setting loads off by applying a current to reach the target setting voltage.
Constant current (CC) mode When a current value is specified, the current is kept at that value even when the voltage changes.
Constant resistance (CR) mode When a conductance value is specified, the product sinks current proportio-nal to the voltage variation by using the value as a proportionality constant.
Constant voltage (CV) mode When a voltage value is specified, the product runs the current so that the voltage is kept at that value.
Constant power (CP) mode When a power value is specified, the product runs the current so that the power is kept at that value.
Arbitrary I-V charac-teristics (ARB) mode The desired load characteristics can be set by specifying multiple arbitrary voltage values and current values as I-V characteristics.
* "UVPL" is the "+CV mode" in PLZ-5W series
https://www.n-denkei.com/singapore/inquiry/
The document discusses different types of controllers for ROBO cylinder actuators. It describes:
1) Positioner type controllers that store positions and can be operated with signals like a solenoid valve for 2-3 positions;
2) Program type controllers that execute programs to operate actuators and communicate with external equipment, allowing control without a PLC;
3) Network type controllers that are compatible with common field networks and allow control via networks or serial communication from devices like a PLC or touch panel.
A variety of controller models are available for different usages and automation needs.
This document provides information on the M/VTM Series Servo Drive AB100C200. It summarizes the drive's key specifications including its power range, features, modes of operation, command sources, feedback supported, and agency approvals. The document also includes block diagrams, pinout diagrams, switch settings, and other technical details.
This servo drive is designed to drive brushless DC motors at high power levels. It can operate in various modes including current, velocity, and duty cycle modes. It has protections against overheating, overcurrent and other faults. It is compliant with various safety standards and has adjustable parameters, feedback options and I/O for control and monitoring.
Ls catalog thiet bi tu dong i c5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document introduces the MSEL-PC/PG program controller for controlling ROBO cylinders. Some key points:
- It can control up to 4 axes of ROBO cylinders simultaneously, compared to only 2 axes for previous controllers. It also enables interpolation operations.
- It has greater memory capacity than previous controllers, with 255 programs (up to 9,999 steps each), 30,000 positions, and 16 multi-tasking programs.
- In addition to standard I/O, it has an expansion slot that supports additional I/O or field network modules.
- It is compatible with ROBO cylinder models RCP5, RCP4, RCP3, and RCP2. Connection
Bien tan ls gioi thieu bien tan i e5 series (new)-1Dien Ha The
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
Catalog Biến Tần LS, Catalog Biến Tần,
Catalog Inverter LS, Catalog Inveter,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Bien tan ls gioi thieu bien tan i e5 series (new)-1-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Bien tan ls gioi thieu bien tan i e5 series (new)-1-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document describes the PRO-A08V48 programmable servo drive. It is a compact drive solution for rotary or linear brushless, stepper or PMDC brush motors with power up to 385W and 48V nominal voltage. It integrates advanced motor control and motion control functionality. The drive can operate autonomously or as part of a multi-axis distributed control solution. It is programmable via ElectroCraft's MotionPRO Suite software.
This document provides information on various types of controllers for ROBO cylinders. It discusses positioner type controllers like PMEC/AMEC and PSEP/ASEP which can control positioning to 2-3 positions using the same signals as a solenoid valve. It also covers program type controllers which execute programmed instructions to control actuators and communicate with other devices, allowing for high-level control and interpolated motion of multiple axes. The document provides specifications for different controller models and describes their applications.
This document provides information about the Analog Servo Drive BE25A20AC:
1) It is a PWM servo drive designed to drive brushless DC motors at high switching frequencies up to 25A of peak current and 12.5A of continuous current.
2) It has fully adjustable current and velocity control loops as well as protective features against overloads and faults.
3) The drive can operate in different modes such as current control, duty cycle control and encoder velocity control using potentiometers and DIP switches for configuration.
The document provides information about the E1100 Servo Controller Series from NTI AG / LinMot. The E1100 series includes various servo controller models for controlling 1, 2, or 3 phase linear or rotary motors. The controllers offer integrated digital position control and interfacing to machine controls via digital interfaces like PROFIBUS-DP, DeviceNet, and CANopen. Key features include storing motion sequences and profiles, synchronization to a master encoder, digital and analog inputs/outputs, and flexible connectivity options.
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
The document describes a 3-position controller for pneumatic cylinders that can be replaced with a ROBO cylinder. The controller has inputs to control positioning to up to 3 positions - home, intermediate, and end. It connects to a PC to configure settings like acceleration, speed, and intermediate positions using free software. Replacing pneumatic cylinders with ROBO cylinders allows maintaining the same PLC programming while gaining features like adjustable speed and intermediate stopping.
Bien tan ls gioi thieu bien tan i c5 series-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Ls catalog thiet bi tu dong i s5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Mitsubishi inverter freqrol-a701 series dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
This document provides specifications for the M/VTM Series Servo Drive AVB125A200. It is designed to drive brushless DC motors for vehicle applications with a peak current of 125A and continuous current of 80A. It accepts analog and potentiometer command inputs and feedback from Hall sensors, encoders, or tachometers. Modes of operation include current, voltage, velocity control and more which are selected using onboard DIP switches and potentiometers.
Mitsubishi inverter inverter family dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
The PLZ-5WH2 high power DC electronic load series is where durable, reliable ingenuity meets multifunctional and high power design. Providing 5 variety of power range line-ups, from 1 kW bench top style model to high power model that can sink up to 20 kW of power in a single unit. Possible to easily selects applicable power range depends on the load. Load simulation can be achieved faster than ever before thanks to the reliable, high speed design of the PLZ-5WH current control circuits. Accurate current measures can be made with extremely high setting resolution. A color LCD display allows for highly visible, user-friendly front panel operation. RS232C, USB, and LAN digital interfaces are included as standard for simple integration into any system.
Constant current (CC) mode When a current value is specified, the current is kept at that value even when the voltage changes.
Constant resistance (CR) mode When a conductance value is specified, the product sinks current proportio-nal to the voltage variation by using the value as a proportionality constant.
Constant voltage (CV) mode When a voltage value is specified, the product runs the current so that the voltage is kept at that value.
Constant power (CP) mode When a power value is specified, the product runs the current so that the power is kept at that value.
Arbitrary I-V charac-teristics (ARB) mode The desired load characteristics can be set by specifying multiple arbitrary voltage values and current values as I-V characteristics.
The PLZ-5WH2 high power DC electronic load series is where durable, reliable ingenuity meets multifunctional and high power design. Providing 5 variety of power range line-ups, from 1 kW bench top style model to high power model that can sink up to 20 kW of power in a single unit. Possible to easily selects applicable power range depends on the load. Load simulation can be achieved faster than ever before thanks to the reliable, high speed design of the PLZ-5WH current control circuits. Accurate current measures can be made with extremely high setting resolution. A color LCD display allows for highly visible, user-friendly front panel operation. RS232C, USB, and LAN digital interfaces are included as standard for simple integration into any system.
Operation Modes
The following five operation modes are available on the PLZ-5WH2. In addition, available to set in operation modes other than CV mode, the “UVPL*” setting keep the voltage less than UVP setting by controlling the current and the “UVPT” setting loads off by applying a current to reach the target setting voltage.
Constant current (CC) mode When a current value is specified, the current is kept at that value even when the voltage changes.
Constant resistance (CR) mode When a conductance value is specified, the product sinks current proportio-nal to the voltage variation by using the value as a proportionality constant.
Constant voltage (CV) mode When a voltage value is specified, the product runs the current so that the voltage is kept at that value.
Constant power (CP) mode When a power value is specified, the product runs the current so that the power is kept at that value.
Arbitrary I-V charac-teristics (ARB) mode The desired load characteristics can be set by specifying multiple arbitrary voltage values and current values as I-V characteristics.
* "UVPL" is the "+CV mode" in PLZ-5W series
https://www.n-denkei.com/singapore/inquiry/
The document discusses different types of controllers for ROBO cylinder actuators. It describes:
1) Positioner type controllers that store positions and can be operated with signals like a solenoid valve for 2-3 positions;
2) Program type controllers that execute programs to operate actuators and communicate with external equipment, allowing control without a PLC;
3) Network type controllers that are compatible with common field networks and allow control via networks or serial communication from devices like a PLC or touch panel.
A variety of controller models are available for different usages and automation needs.
This document provides information on the M/VTM Series Servo Drive AB100C200. It summarizes the drive's key specifications including its power range, features, modes of operation, command sources, feedback supported, and agency approvals. The document also includes block diagrams, pinout diagrams, switch settings, and other technical details.
This servo drive is designed to drive brushless DC motors at high power levels. It can operate in various modes including current, velocity, and duty cycle modes. It has protections against overheating, overcurrent and other faults. It is compliant with various safety standards and has adjustable parameters, feedback options and I/O for control and monitoring.
Ls catalog thiet bi tu dong i c5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document introduces the MSEL-PC/PG program controller for controlling ROBO cylinders. Some key points:
- It can control up to 4 axes of ROBO cylinders simultaneously, compared to only 2 axes for previous controllers. It also enables interpolation operations.
- It has greater memory capacity than previous controllers, with 255 programs (up to 9,999 steps each), 30,000 positions, and 16 multi-tasking programs.
- In addition to standard I/O, it has an expansion slot that supports additional I/O or field network modules.
- It is compatible with ROBO cylinder models RCP5, RCP4, RCP3, and RCP2. Connection
Bien tan ls gioi thieu bien tan i e5 series (new)-1Dien Ha The
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
Catalog Biến Tần LS, Catalog Biến Tần,
Catalog Inverter LS, Catalog Inveter,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Bien tan ls gioi thieu bien tan i e5 series (new)-1-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Bien tan ls gioi thieu bien tan i e5 series (new)-1-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
The document describes the PRO-A08V48 programmable servo drive. It is a compact drive solution for rotary or linear brushless, stepper or PMDC brush motors with power up to 385W and 48V nominal voltage. It integrates advanced motor control and motion control functionality. The drive can operate autonomously or as part of a multi-axis distributed control solution. It is programmable via ElectroCraft's MotionPRO Suite software.
This document provides information on various types of controllers for ROBO cylinders. It discusses positioner type controllers like PMEC/AMEC and PSEP/ASEP which can control positioning to 2-3 positions using the same signals as a solenoid valve. It also covers program type controllers which execute programmed instructions to control actuators and communicate with other devices, allowing for high-level control and interpolated motion of multiple axes. The document provides specifications for different controller models and describes their applications.
This document provides information about the Analog Servo Drive BE25A20AC:
1) It is a PWM servo drive designed to drive brushless DC motors at high switching frequencies up to 25A of peak current and 12.5A of continuous current.
2) It has fully adjustable current and velocity control loops as well as protective features against overloads and faults.
3) The drive can operate in different modes such as current control, duty cycle control and encoder velocity control using potentiometers and DIP switches for configuration.
This document provides specifications for the XSEL Series 8-axis program controller sold by Electromate. It can operate up to 24 robot axes with a single controller by interpolating up to 8 axes or connecting additional controllers via DeviceNet, EtherCAT, or EtherNet/IP. It also allows networking multiple XSEL controllers via IA net for expanded I/O and monitoring capabilities. The controller includes maintenance functions to count axis movements and notify when servicing is required.
The S60A8 analog servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It requires 2 sinusoidal command signals 120 degrees out of phase to control motor position and torque. The drive interfaces with digital controllers, has overvoltage, overcurrent, and overheating protections, and operates from a single DC power supply. It provides optical isolation between high and low power signals.
The SX30A8 analog servo drive:
- Is designed to drive 3-phase brushless motors with sinusoidal current control. It requires two 120° phase shifted sine wave command signals.
- Has a peak current of 30A and continuous current of 15A RMS. It operates from a 20-80VDC power supply.
- Provides optical isolation, regenerative braking, adjustable current limits, and fault protection. Status is indicated by an LED and digital outputs.
The document provides specifications for the AZBE25A20 analog servo drive. The drive is designed to drive brushless and brushed DC motors at high switching frequencies up to 25A continuous current. It has features like four quadrant regenerative operation, direct board integration, encoder and tachometer feedback support, and hardware protections. The drive requires only a single DC power supply and complies with safety and emissions standards.
The S60A40 PWM servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It interfaces with digital controllers and requires 2 sinusoidal command signals with 120° phase shift for motor commutation. The drive is fully protected and requires only a single DC power supply. It provides optical isolation between high and low power signals.
The AZBE10A20 is an analog servo drive designed to drive brushless and brushed DC motors. It can provide up to 10A of continuous current and operates on an input voltage range of 40-175VDC. The drive has features such as four quadrant regenerative operation, direct board integration, encoder and tachometer feedback support, and hardware protections against overvoltage, overcurrent, and more.
The S30A40 analog servo drive is designed to drive 3-phase brushless motors with sine wave current. It interfaces with digital controllers and requires 2 sinusoidal command signals with 120° phase shift for motor commutation. The drive provides protection against overvoltage, overcurrent and other faults. It operates from a single DC power supply and has optical isolation between high and low power signals.
The document provides specifications for the S30A40AC analog servo drive. It is designed to drive 3-phase brushless motors with sine wave current at high frequencies. It requires two 120-degree phase shifted sine wave command signals for commutation and torque control. The drive has overcurrent, overvoltage, and thermal protections. It is compliant with various safety and EMC standards.
The document describes an analog servo drive called the BE25A20FAC. It has the following key specifications:
- It can deliver up to 25A of peak current and 12.5A of continuous current from a 30-130V AC power supply.
- It is designed to drive brushless DC motors and features four quadrant regenerative operation, adjustable current limits, and selectable operating modes including current, open loop, and encoder velocity modes.
- It provides motor commutation from hall sensors or an encoder, and supports feedback from halls, encoders, or a tachometer.
- It has adjustable parameters like loop gain, current limit, input gain and offset via onboard potentiometers.
The S100A8 analog servo drive is designed to drive 3-phase brushless motors with sinusoidal current. It interfaces with digital controllers and requires 2 sinusoidal command signals 120 degrees out of phase. It has protection against overvoltage, overcurrent, and short circuits. Key features include optical isolation, regenerative braking, adjustable current limits, and a high switching frequency.
The document describes the Analog Servo Drive AZBH40A8. It is designed to drive brushless and brushed DC motors at high switching frequencies. It can provide a peak current of 40A and continuous current of 20A, with a supply voltage range of 10-80VDC. The drive supports various feedback and operation modes, and includes protections for overvoltage, overcurrent, overheating and more.
The S16A8 PWM servo drive is designed to drive 3-phase brushless motors with sine wave current. It requires two 120-degree phase shifted sinusoidal command signals for motor position and torque control. The drive interfaces with digital controllers, is fully protected against faults, and requires a single unregulated DC power supply.
The document provides specifications for the AZBH25A20 analog servo drive. The drive is designed to drive brushless and brushed DC motors at high switching frequencies. It has a peak current of 25A, continuous current of 12.5A, and operates on a DC supply voltage of 40-175VDC. The drive provides various protection features and supports different feedback and operation modes.
Automated screw thread quality checking using SMAC LAR55 actuator new produc...Electromate
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...Electromate
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...Electromate
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...Electromate
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...Electromate
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...Electromate
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...Electromate
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular SpecsElectromate
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with BrakeElectromate
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage SpecsElectromate
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported SpecsElectromate
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage SpecsElectromate
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CAElectromate
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported SpecsElectromate
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows SpecsElectromate
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA SpecsElectromate
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC SpecsElectromate
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB SpecsElectromate
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
How to Get CNIC Information System with Paksim Ga.pptx
Iai ssel controller_specsheet
1. Program controller
For RCS2
List of models
Program controller for operating RCS2 Series actuators. One unit can handle various controls.
Type C
Name Program mode Positioner Mode
External View
Description
Number of control axes:
Model
S S E L C
Series (Specs for 1st axis) (Specs for 2nd axis)
577 SSEL
Type Number of Axes
* 2nd axis specs not applicable to the single-axis model.
Motor Encoder Option Motor Encoder Option
I/O Cable
Length
Power Voltage
I/O Type
B Brake
C Creep sensor
HA High Accel./Decel.
L Home sensor/
LS-compatible
M Master axis spec
B Brake
C Creep sensor
HA High Accel./Decel.
L Home sensor/
LS-compatible
S Slave axis spec
20 20W servo motor
30D 30W servo
motor for RCS2
30R 30W servo
motor for RS
60 60W servo motor
100 100W servo motor
150 150W servo motor
200 200W servo motor
300 300W servo motor
400 400W servo motor
600 600W servo motor
750 750W servo motor
20 20W servo motor
30D 30W servo
motor for RCS2
30R 30W servo
motor for RS
60 60W servo motor
100 100W servo motor
150 150W servo motor
200 200W servo motor
300 300W servo motor
400 400W servo motor
600 600W servo motor
750 750W servo motor
1 Single-axis model
2 2-axis model I Incremental
A Absolute
I Incremental
A Absolute
1 Single-phase
AC100V
2
Single-phase
AC200V
0 No cable
2 2m
3 3m
5 5m
NP PIO NPN (standard)
PN PIO PNP
DV DeviceNet
CC CC-Link
PR ProfiBus
C Standard Type
Both the actuator operation and communication with
external equipment can be handled by a single controller.
When two axes are connected, arc interpolation, path
operations, and synchronization can be performed.
Up to 20000 positioning points are supported.
Push-motion operation and teaching operation are also possible.
Position points 20000 points
2 axes max.
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
2. Required Number of
Regenerative Resistor Units
Vertical
~200W
1 unit
2 units
~800W ~600W
~800W
* Depending on the operating conditions,
ޓmore regenerative resistors may be needed.
SSEL 578
PLC
I/O Flat Cable (see P586)
<Model: CB-DS-PIO020>
(supplied with controller)
Field Network
Regenerative Resistor Unit
(See P585)
<Model: REU-2>
(Optional)
Panel Unit
(See P585)
<Model: PU-1>
Horizontal
0 units ~200W
Cable for Regenerative Resistor Unit
<Model: CB-SC-REU010>
(Supplied with the regenerative resistor unit.)
0.2m
Adapter Cable (see P586)
<Model: CB-SEL-SJ002>
(Optional)
3m
USB Cable (see P586)
<Model: CB-SEL-USB030>
(Supplied with the IA-101-X-USB
PC software)
Absolute Data Backup Battery (see P585)
<Model: AB-5>
(included with absolute type controller)
Teaching Pendant (see P585)
<Model: SEL-T/SEL-TD>
(Optional)
* Always use a noise filter
when connecting power
Motor Cable
<Model: CB-RCC-MA
Standard 1m/3m/5m
For a replacement cable, see P586
Encoder Cable
Model: CB-RCS2-PA
Standard 1m/3m/5m
For a replacement cable, see P586.
RS232C Cable
Model: CB-ST-E1MW050-
EB
(Supplied with the
IA-101-X-MW
PC software)
5m
5m
PC Software (see P585)
Model: IA-101-X-MW (with RS232C cable)
Model: IA-101-X-USB (with USB cable)
System Memory Backup Battery (see P585)
Actuator
RCS2 series/single-axis robot/linear servo actuator
2m
1m
3m
Model: AB-5-CS (with case)
AB-5 (standard battery)
(Optional)*1
*1ޓThe system memory backup battery is a
required feature if you wish to retain data
such as flags used in programs even after
the power has been shut off.
Main
Power
Supply Single-phase AC100V
Single-phase AC200V
Recommended: MC1220 (for AC100V) (Manufacturer: TDK-Lambda)
MC1210 (for AC200V) (Manufacturer: TDK-Lambda)
(Available through IAI. Please inquire for details.)
System configuration
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
3. I/O Specifications
■ Input section External input specifications
P24V
Item
Input voltage
Input current
ON/OFF voltage
Isolation method
Specifications
DC24V ±10%
7mA / circuit
ON voltage (min.) NPN:DC16V / PNP:DC8V
OFF voltage (max.) NPN:DC5V / PNP:DC19V
Photocoupler
External
power
supply
+24V Input terminal
Inputs R=3.3kΩ
External
power
supply
+24V Input terminal
R=560Ω
Explanation of I/O Signal Functions
■ Output section External output specifications
Item
Load Voltage
Max. load current
Residual voltage (Max.)
Isolation method
Internal circuit Outputs
Outputs
Two modes can be selected for the SSEL controller: “Program Mode,” in which the actuator is operated by entering a program,
and “Positioner Mode,” in which PLC signals are received and the actuator is moved to designated positions.
The Positioner Mode has the five input patterns listed below to enable various applications.
579 SSEL
R=560Ω
Internal circuit
P24
N
Load External
power
supply
+ 2 4 V
N
Inputs R=3.3kΩ
Internal circuit P24V
N
Internal circuit
External
power
supply
+ 2 4 V
Load
NPN Specifications NPN Specifications
PNP Specifications PNP Specifications
Specifications
DC24V
100m A / 1point 400mA / 8 points in total
Max 0.1mA / 1 point
Photocoupler
■ Control Function by Type
Operation mode Features
Program mode
Positioner mode
Various operations including linear/arc interpolation operation, path operation ideal for coating processes, etc., arch-motion
operation and palletizing operation can be performed using the Super SEL language that lets you program
complex control actions using simple commands.
This is the basic mode from which operations can be conducted by designating position numbers and inputting the start
signal.
Push-motion operation and teaching operation are also possible.
Multiple parts of the same shape with slightly different hole positions can be handled using movement commands to the
same position numbers by simply changing the product type number.
With a 2-axis controller, each axis can be commanded and operated separately.
In this mode, the slider (rod) moves based on an external signal, when the actuator is stopped, the current position can
be registered as position data.
Standard mode
Product change
mode
2-axis
independent mode
Teaching mode
DS-S-C1
Compatible mode
If you were using a DS-S-C1 controller, you can replace it with a SSEL controller without having to change the host
programs. *This mode does not ensure actuator compatibility.
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
4. SSEL 580
Explanation of I/O Signal Functions
Pin Number Category
Input
Output
N
Port No. Program Mode Functions
016
24V input Connect 24V.
Selects the program number to start.
(Input as BCD values to ports 016 to 022)
Resets the system to the same state as when the power is turned on.
Starts the programs selected by ports 016 to 022.
Waits for external input via program instructions.
Turns off when an alarm occurs. (Contact B)
Turns on when the controller starts up normally and is in an operable state.
These outputs can be turned ON/OFF as desired via program instructions.
Connect 0V.
0V 24
Wiring Diagram
1A P24
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
9B
10A
10B
11A
11B
12A
12B
13A
13B
14A
14B
15A
15B
16A
16B
17A
17B
017
018
019
020
021
022
023
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
300
301
302
303
304
305
306
307
Select Program No. 1
Select Program No. 2
Select Program No. 4
Select Program No. 8
Select Program No. 10
Select Program No. 20
Select Program No. 40
CPU reset
Start
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
General-purpose input
Alarm
Ready
General-purpose output
General-purpose output
General-purpose output
General-purpose output
General-purpose output
General-purpose output
0V input
Pin Number Category
Input
Output
N
Port No. Positioner
016
Note: This is for NPN. PNP will be different.
Standard Mode Functions
24V input Connect 24V.
Specifies the position numbers to move to, using port number 007 to 019
The number can be specified either as BCD or binary.
−
−
−
Resets minor errors. (Severe errors require a restart.)
Starts moving to selected position.
Performs home return.
Switches between Servo ON and OFF.
Performs a push motion.
Pauses the motion when turned OFF, and resumes motion when turned ON.
Stops the motion when turned OFF. The remaining motion is canceled.
When this signal is turned ON for a 2-axis model, the actuator moves by linear interpolation.
Specifies the position numbers to move to, using ports 007 to 019.
The number can be specified either as BCD or binary.
Turns off when an alarm occurs. (Contact B)
Turns on when the controller starts up normally and is in an operable state.
Turns on when the movement to the destination is complete.
Turns on when the home return operation is complete.
Turns on when servo is ON.
Turns on when a push motion is complete.
Turns on when the system battery runs low (warning level).
Turns on when the battery for the absolute encoder runs low (warning level).
Connect 0V.
0V 24
Wiring Diagram
1A P24
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
9B
10A
10B
11A
11B
12A
12B
13A
13B
14A
14B
15A
15B
16A
16B
17A
17B
017
018
019
020
021
022
023
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
300
301
302
303
304
305
306
307
Position input 10
Position input 11
Position input 12
Position input 13
Position input 14
Position input 15
Position input 16
Error reset
Start
Home Return
Servo ON
Push
Pause
Cancel
Interpolation setting
Position input 1
Position input 2
Position input 3
Position input 4
Position input 5
Position input 6
Position input 7
Position input 8
Position input 9
Alarm
Ready
Positioning complete
Home Return complete
Servo ON output
Pushing complete
System battery error
Absolute encoder battery error
0V input
Program mode
Positioner mode
Note: This is for NPN. PNP will be different.
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
5. Explanation of I/O Signal Functions
Positioner, Product-Type Change Mode
Pin Number Category
Input
Output
N
Positioner, 2-axis Independent Mode
581 SSEL
Port No. Positioner Product
016
Type Change Mode Functions
24V input Connect 24V.
Specifies the position numbers to move to, and the product type
numbers, using ports 007 to 022.
The position and product type numbers are assigned by parameter
settings. The number can be specified either as BCD or binary.
Starts moving to selected position.
Performs home return.
Switches between Servo ON and OFF.
Performs a push motion.
Pauses the motion when turned OFF, and resumes motion when turned ON.
Stops the motion when turned OFF. The remaining motion is canceled.
When this signal is turned ON for a 2-axis model, the actuator moves by linear interpolation.
Specifies the position numbers to move to, and the product type numbers,
using ports 007 to 022.
The position and product type numbers are assigned by parameter settings.
The number can be specified either as BCD or binary.
Connect 0V.
0V 24
Wiring Diagram
1A P24
Resets minor errors. (Severe errors require a restart.)
Turns off when an alarm occurs. (Contact B)
Turns on when the controller starts up normally and is in an operable state.
Turns on when the movement to the destination is complete.
Turns on when the home return operation is complete.
Turns on when servo is ON.
Turns on when a push motion is complete.
Turns on when the system battery runs low (warning level).
Turns on when the battery for the absolute encoder runs low (warning level).
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
9B
10A
10B
11A
11B
12A
12B
13A
13B
14A
14B
15A
15B
16A
16B
17A
17B
017
018
019
020
021
022
023
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
300
301
302
303
304
305
306
307
Position/Product Type Input 10
Position/Product Type Input 11
Position/Product Type Input 12
Position/Product Type Input 13
Position/Product Type Input 14
Position/Product Type Input 15
Position/Product Type Input 16
Error reset
Start
Home Return
Servo ON
Push
Pause
Cancel
Interpolation setting
Position/Product Type Input 1
Position/Product Type Input 2
Position/Product Type Input 3
Position/Product Type Input 4
Position/Product Type Input 5
Position/Product Type Input 6
Position/Product Type Input 7
Position/Product Type Input 8
Position/Product Type Input 9
Alarm
Ready
Positioning complete
Home Return complete
Servo ON output
Pushing complete
System battery error
Absolute encoder battery error
0V input
Pin Number Category
Input
Output
N
Port No. Positioner
016
Note: This is for NPN. PNP will be different.
Independent Mode Functions
24V input Connect 24V.
Specifies the position numbers to move to, using ports 010 to 022.
The position numbers on the 1st and 2nd axes are assigned by
parameter settings.
The number can be specified either as BCD or binary.
Starts the movement to the selected position number on the 1st axis.
Performs Home Return on the 1st axis.
Switches between servo ON and OFF for the 1st axis.
Pauses the motion on 1st axis when turned OFF, and resumes when turned ON.
Cancels the movement on the 1st axis.
Starts the movement to the selected position number on the 2nd axis.
Performs Home Return on the 2nd axis.
Switches between servo ON and OFF for the 2nd axis.
Pauses the motion on 2nd axis when turned OFF, and resumes when turned ON.
Cancels the movement on the 2nd axis.
Specifies the position numbers to move to, using ports 010 to 022.
The position numbers on the 1st and 2nd axes are assigned by
parameter settings.
The number can be specified either as BCD or binary.
Connect 0V.
0V 24
Wiring Diagram
1A P24
Resets minor errors. (Severe errors require a restart.)
Turns off when an alarm occurs. (Contact B)
Turns on when the controller starts up normally and is in an operable state.
Turns on when the movement to the specified position on the 1st axis is complete.
Turns on when home return on the 1st axis is complete.
Turns on when the 1st axis is in a servo ON state.
Turns on when the movement to the specified position on the 2nd axis is complete.
Turns on when home return on the 2nd axis is complete.
Turns on when the 2nd axis is in a servo ON state.
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
9B
10A
10B
11A
11B
12A
12B
13A
13B
14A
14B
15A
15B
16A
16B
17A
17B
017
018
019
020
021
022
023
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
300
301
302
303
304
305
306
307
Position input 7
Position input 8
Position input 9
Position input 10
Position input 11
Position input 12
Position input 13
Error reset
Start 1
Home Return 1
Servo ON 1
Pause 1
Cancel 1
Start 2
Home Return 2
Servo ON 2
Pause 2
Cancel 2
Position input 1
Position input 2
Position input 3
Position input 4
Position input 5
Position input 6
Alarm
Ready
Positioning complete 1
Home Return complete 1
Servo ON output 1
Positioning complete 2
Home Return complete 2
Servo ON output 2
0V input
Note: This is for NPN. PNP will be different.
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
6. SSEL 582
Explanation of I/O Signal Functions
Positioner, Teaching Mode
Pin Number Category
Input
Output
N
016
24V input Connect 24V.
While the signal is input, the 1st axis is moved in the - (negative) direction.
While the signal is input, the 2nd axis is moved in the + (positive) direction.
While the signal is input, the 2nd axis is moved in the - (negative) direction.
Specifies how much to move during inching.
(Total of the values specified for ports 019 to 022)
Port No. Positioner
Teaching Mode Functions
Starts moving to selected position.
Switches between Servo ON and OFF.
Pauses the motion when turned OFF, and resumes motion when turned ON.
Ports 003 to 013 are used to specify the position number to move, and
the position number for inputting the current position.
When the teaching mode setting on port 014 is in the ON state, the
current value is written to the specified position number.
While the signal is input, the 1st axis is moved in the plus direction.
Connect 0V.
0V 24
Wiring Diagram
1A P24
Resets minor errors. (Severe errors require a restart.)
Turns off when an alarm occurs. (Contact B)
Turns on when the controller starts up normally and is in an operable state.
Turns on when the movement to the destination is complete.
Turns on when the home return operation is complete.
Turns on when servo is ON.
Turns on when the system battery runs low (warning level).
Turns on when the battery for the absolute encoder runs low (warning level).
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
9B
10A
10B
11A
11B
12A
12B
13A
13B
14A
14B
15A
15B
16A
16B
17A
17B
017
018
019
020
021
022
023
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
300
301
302
303
304
305
306
307
JOG− on 1st axis
JOG+ on 2nd axis
JOG− on 2nd axis
Specify inching (0.01mm)
Specify inching (0.1mm)
Specify inching (0.5mm)
Specify inching (1mm)
Error reset
Start
Servo ON
Pause
Position input 1
Position input 2
Position input 3
Position input 4
Position input 5
Position input 6
Position input 7
Position input 8
Position input 9
Position input 10
Position input 11
Teaching mode setting
JOG+ on 1st axis
Alarm
Ready
Positioning complete
Home Return complete
Servo ON output
System battery error
Absolute encoder battery error
0V input
Positioner, DS-S-C1 Compatible Mode
Pin Number Category
Input
Output
N
016
24V input Connect 24V.
Note: This is for NPN. PNP will be different.
(Same as ports 004 through 015)
Port No. Positioner DS-S-C1
Compatible Mode Functions
Starts moving to selected position.
Pauses the motion when turned ON, and resumes motion when turned OFF.
Stops the motion when turned ON. The remaining motion is canceled.
When this signal is turned ON for a 2-axis model, the actuator moves by linear interpolation.
Ports 004 through 016 are used to specify the position number to move.
The numbers are specified as BCD.
Connect 0V.
0V 24
Wiring Diagram
1A P24
Resets the system to the same state as when the power is turned on.
Turns off when an alarm occurs. (Contact A)
Turns on when the controller starts up normally and is in an operable state.
Turns on when the movement to the destination is complete.
Turns on when the system battery runs low (warning level).
Turns on when the battery for the absolute encoder runs low (warning level).
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
9B
10A
10B
11A
11B
12A
12B
13A
13B
14A
14B
15A
15B
16A
16B
17A
17B
017
018
019
020
021
022
023
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
300
301
302
303
304
305
306
307
Position No. 1000
Position No. 2000
Position No. 4000
Position No. 8000
Position No. 10000
Position No. 20000
NC (*1)
CPU reset
Start
Hold (Pause)
Cancel
Interpolation setting
Position No. 1
Position No. 2
Position No. 4
Position No. 8
Position No. 10
Position No. 20
Position No. 40
Position No. 80
Position No. 100
Position No. 200
Position No. 400
Position No. 800
Alarm
Ready
Positioning complete
System battery error
Absolute encoder battery error
0V input
(*1) The input needs to be set to OFF. Be sure to leave this disconnected.
Note: This is for NPN. PNP will be different.
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
7. Table of specifications
Item Specifications
Connected actuator
Input Voltage
Power Supply Capacity
Dielectric strength voltage
Withstand voltage
Rush current
Vibration resistance
Number of control axes
Maximum total output of connected axis
Position detection method
Speed setting
Acceleration setting
Operating method
Programming language
Number of programs
Number of program steps
Number of multi-tasking programs
Positioning Points
Data memory device
Data input method
Number of I/O
I/O power
PIO cable
Serial communications function
Field Network
Motor Cable
Encoder cable
Protection function
Ambient operating humidity and temperature
Ambient atmosphere
Protection class
Weight
External dimensions
External Dimensions
SSEL 1-axis controller
583 SSEL
RCS2 series actuator / single axis robot / linear servo actuator
Single-phase AC90V to AC126.5V
Single-phase AC180V to AC253V
Max. 1660VA (for 400W, 2-axis operation)
DC500V 10MΩ or higher
AC500V 1 min.
Control Power 15A / Motor Power 37.5A Control Power 30A / Motor Power 75A
XYZ directions 10 to 57Hz, One side amplitude: 0.035mm (continuous), 0.075mm (intermittent)
58 to 150 Hz 4.9 m/s2 (continuous), 9.8 m/s2 (intermittent)
1 axis / 2 axis
400W 800W
Incremental encoder / Absolute encoder
1mm/sec and up, the maximum depends on actuator specifications
0.01G and up, the maximum depends on the actuator
Program operation / Positioner operation (switchable)
Super SEL language
128 programs
9999 steps
8 programs
20000 points
FLASHROM (A system-memory backup battery can be added as an option)
Teaching pendant or PC software
24 input points / 8 output points (NPN or PNP selectable)
Externally supplied 24VDC ± 10%
CB-DS-PIO □□□ (supplied with the controller)
RS232C (D-Sub Half-pitch connector) / USB connector
DeviceNet, CC-Link, ProfiBus
CB-ACS-MA □□□ (Max. 20m)
CB-RCP2-PA □□□ (Max. 20m)
Motor overcurrent, Motor driver temperature check, Overload check, Encoder open-circuit check
Soft limit over, system error, battery error, etc.
0 to 40°C 10 to 95% (non-condensing)
Free from corrosive gases. In particular, there shall be no significant dust.
IP20
1.4kg
100mm (W) x 202.6mm (H) x 126mm (D)
(Note 1)
(Note 1) Absolute data back-up battery. Not installed with
incremental specification.
SSEL 2-axis controller
(Note 1)
(Note 1) Absolute data back-up battery. Not installed with
incremental specification.
Basic Specifications
Control
specification
Communication Program
General
specifications
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
8. 15 Brake switch for axis 1
This switch is used to release the axis brake. Setting it to
the left position (RLS side) forcibly releases the brake,
while setting it to the right position (NOM side) causes the
controller to automatically control the brake.
SSEL 584
Name of Each Part
$#6 $#6
5$#6
2 System I/O connector
Connector for emergency stop / enable input / brake power
input, etc.
11 Grounding screw
Protective grounding screw. Always ground this screw.
12 External regenerative resistor connector
A connector for the regenerative resistor that must be
connected when the built-in regenerative resistor alone
does not offer sufficient capacity in high-acceleration/
high-load operation, etc.
Whether or not an external regenerative resistor is
necessary depends on the conditions of your specific
application such as the axis configuration.
13 Motor connector for axis 1
Connects the motor cable of the axis 1 actuator.
14 Motor connector for axis 2
Connects the motor cable of the axis 2 actuator.
16 Brake switch for axis 2
This switch is used to release the axis brake. Setting it to
the left position (RLS side) forcibly releases the brake,
while setting it to the right position (NOM side) causes the
controller to automatically control the brake.
17 Encoder connector for axis 1
Connect the encoder cable of the axis 1 actuator.
18 Encoder connector for axis 2
Connect the encoder cable of the axis 2 actuator.
19 Absolute-data backup battery connector for axis 1
A connector for the battery that backs up absolute data for
axis 1 when the actuator uses an absolute encoder.
20 Absolute-data backup battery connector for axis 2
A connector for the battery that backs up absolute data for
axis 2 when the actuator uses an absolute encoder.
21 System-memory backup battery connector
A connector for the system-memory backup battery.
3 Teaching pendant connector
A half-pitch I/O 26-pin connector that connects a teaching
pendant when the running mode is MANU. A special
conversion cable is needed to connect a conventional
Dsub, 25-pin connector.
4 Mode switch
This switch is used to specify the running mode of the
controller. The left position indicates the MANU (manual
operation) mode, while the right position indicates the
AUTO (automatic operation) mode. Teaching can only be
performed as manual operation, and automatic operation
using external I/Os is not possible in the MANU mode.
5 USB connector
A connector for PC connection via USB. If the USB
connector is connected, the TP connector is disabled and
all communication inputs to the TP connector are cut off.
6 I/O Connector
A connector for interface I/Os.
34-pin flat cable connector for DIO (24IN/8OUT) interface.
I/O power is also supplied to the controller via this
connector (Pin No. 1 and No. 34).
7 Panel unit connector
A connector for the panel unit (optional) that displays the
controller status and error numbers.
8 Absolute data backup battery
When an absolute-type axis is operated, this battery retains
position data even after the power is cut off.
9 System memory backup battery (Option)
This battery is needed if you wish to retain various data
recorded in the SRAM of the controller even after the
power is cut off.
This battery is optional. Specify it if necessary.
10 Power supply connector
AC power connector. Divided into the control power input
and motor power input.
1 Status indicator LEDs
These LEDs are used to indicate the operating condition of
the controller.
The LED status indicators are as follows:
PWR : Power is input to controller.
RDY : The controller is ready to perform program
operation.
ALM : The controller is abnormal.
EMG : An emergency stop is actuated and the drive
source is cut off.
SV1 : The axis 1 actuator servo is on.
SV2 : The axis 2 actuator servo is on.
11
12
13
15
16
14
17
18
1 9
10
8
2
3
4
5
6
7
19
20
8
9
21
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
9. Option
Teaching Pendant
A teaching device for entering programs
and positions, test runs, and monitoring.
Model Description
IA-101-X-MW-J (with RS232C cable + adapter cable)
SEL-T option
585 SSEL
Specifications
39.0
Item SEL-T-J SEL-TD-J
3-position Enable Switch No Yes
Compliant
SEL-T-J
SEL-TD-J
Standard type with adapter cable
Deadman's switch type and
adapter cable
5m
Adapter cable: CB-SEL-SJ002
0.2m
66.6
46.9
55.0
89.6
218.3
110.0
• Wall-mounting
hook
Model HK-1
• Strap
Model STR-1
PC Software (Windows Only)
A startup support software for entering programs/positions, performing
test runs, and monitoring. More functions have been added for
debugging, and improvements have been made to shorten the start-up
time.
IA-101-X-MW (with RS232C cable)
5m 0.2m
Adapter cable:
RS232C Cable
CB-ST-E1MW050-EB
PC Software (CD) CB-SEL-SJ002
IA-101-X-USB (with USB cable)
3m
Compatible controller
SSEL-C
Dummy plug
DP-3
PC Software (CD)
USB cable
CB-SEL-USB030
Note:
Compliant
Only versions 6.0.0.0 and later can be used
with the SSEL controller.
Features
Model/Price
Configuration
Features
Model
Configuration
Model
Configuration
ANSI/UL standards
CE mark
Display
Ambient Operating
Temp./Humidity
Protective structure
Weight
Non-compliant
20 char. × 4 lines
0~40ºC 10~90% RH (non-condensing)
IP54
Approx. 0.4kg (not incl. cable)
Panel Unit
Display device that shows the error code from
the controller or the currently running program
number.
PU-1 (Cable length: 3m)
ø3.2 17
114
43
Horizontal
Vertical
175
Absolute Data Backup Battery System Memory Backup Battery
Battery for saving absolute data, when
operating an actuator with an absolute encoder.
Same as the battery used for system memory
backup.
AB-5
This battery is required, for example, when you
are using global flags in the program and you
want to retain your data even after the power
has been turned OFF.
AB-5-CS
AB-5
(with case)
(Standalone battery)
Features
Model
Features
Model
Features
Model
A unit that converts the regenerative current, generated during the
acceleration/deceleration of the of the motor, into heat.
In the table on the right, check the total power output of the actuator to see if a
regenerative resistor is needed.
REU-2 (for SCON/SSEL)
Features
Model
Specifications
Weight of main unit
Main unit-Controller
Connection Cable (included)
0.9kg
CB-SC-REU010 (for SSEL)
Required Number of Units Exterior Dimensions
0 units ~200W
~200W
* Depending on the operating conditions,
ޓmore regenerative resistors may be needed.
ø5
16.6 126
34
5
195
186
Regenerative Resistor Unit
Standard Price
Internal regenerative resistance 220Ω 80W
1 unit
2 units
~800W ~600W
~800W
* If 2 regenerative units are needed,
acquire one REU-2 and one REU-1
(See P596).
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
10. USB Cable Adapter Cable
When you need spare parts after purchasing the product, such as when replacing a cable, refer to the list of models below.
Signal Color Wire
Pink
Purple
White
Blue/red
Orange/White
Green/White AWG26
Ground
Blue
Black
Yellow
Green
Brown
No.
5 4
2 1
3
6
9 8 7
10
11
12
13
14
A A
B
Z B
Z
LS+
FG
SD
SD
BAT−
VCC
GND
LS-BAT+
No. Signal Color Wire
AWG26
AWG26
SSEL 586
Option
Spare parts
Wire
AWG26
(soldered)
No.
10
11
12
13
26
25
24
23
9
18
19
5 4
2 1
3
6
8 7
14
15
16
17
20
21
22
Signal
E24V
0V
LS
CREEP
OT
RSV
A+
A−
B+
B−
Z+
Z−
SRD-SRD+
BAT+
BAT−
VCC
BKR-GND
BKR+
Color
Gray/White
Brown/White
Pink
Purple
White
Blue/red
Orange/White
Green/White
Blue
Orange
Black
Yellow
Green
Pin No. Color Wire
Flat
cable
crimped
Wire
Flat
cable
crimped
Pin No. Color
1A Brown 1 9B Gray 2
Motor cable/Motor robot cable
(Front view) (Front view)
Min. bend radius r = 50 mm or larger (when movable type is used)
* Only the robot cable is to be used in a cable track.
Encoder cable/Encoder robot cable
(41) (14)
Encoder cable/Encoder robot cable for RCS2-RT6/RT6R/RT7R/RA13R
1B 1A
17B 17A
(20) (10)
(15)
10
(25)
10
1
LS side
Flat cable AWG28 (34-core)
2m
No connector
1B
2A
2B
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
Red 1
Orange 1
Yellow 1
Green 1
Blue1
Purple 1
Gray 1
White 1
Black 1
Brown-2
Red 2
Orange 2
Yellow 2
Green 2
Blue 2
Purple 2
10A
10B
11A
11B
12A
12B
13A
13B
14A
14B
15A
15B
16A
16B
17A
17B
White 2
Black 2
Brown-3
Red 3
Orange 3
Yellow 3
Green 3
Blue 3
Purple 3
Gray 3
White 3
Black 3
Brown-4
Red 4
Orange 4
Yellow 4
4
1
I/O Flat Cable
Model CB-DS-PIO □□□
* Enter the cable length (L) into □□□ . Compatible to a maximum of 10 meters.
Ex.: 080 = 8 m
Dummy Plug
When connecting the SSEL controller to a
computer with a USB cable, this plug is
inserted in the teaching port to shut off the
enable circuit.
(Supplied with the PC software IA-101-X-USB)
A cable for connecting the controller to the
USB port to a computer.
A controller with no USB port (e.g. XSEL) can
be connected to the USB port of a computer
by connecting an RS232C cable to the USB
cable via a USB adapter.
DP-3 (See PC software IA-101-X-USBMW)
CB-SEL-USB030 (Cable length: 3㨙)
An adapter cable to connect the D-sub
25-pin connector from the teaching pendant
or a PC to the teaching connector (half-pitch)
of the SSEL controller.
CB-SEL-SJ002 (Cable length: 0.2㨙)
Features
Model
Features
Model
Features
Model
Model CB-RCC-MA □□□ / CB-RCC-MA □□□ -RB
* Enter the cable length (L) into □□□ . Compatible to a maximum of 30 meters.
Ex.: 080 = 8 m
L
Controller side
1
4
Wire Color Signal
0.75sq
Green PE 1
Signal Color Wire
0.75sq
(crimped)
1 U Red
Mechanical side
(16)
(ø9)
(21)
(18)
(41)
Red
White
Black
U
V
W
2
3
4
2
3
4
V
W
PE
White
Black
Green
Model CB-RCS2-PA □□□ / CB-X3-PA □□□
* Enter the cable length (L) into □□□ . Compatible to a maximum of 30 meters.
Ex.: 080 = 8 m
1
9
1
13
14
26
18
L
Ground wire and shield braiding Gray
Red
(crimped)
Orange
15
16
17
18
BK−
BK+
The shield is connected to the hood by a clamp.
Brown/White
Gray/White
Brown
Gray
Red
(ø10)
Controller side
(13)
(37)
(Front view) Mechanical side (Front view)
Model CB-RCS2-PLA □□□ / CB-X2-PLA □□□
* Enter the cable length (L) into □□□ . Compatible to a maximum of 30 meters.
Ex.: 080 = 8 m
Ground wire and shield braiding
(crimped)
AWG26
(soldered)
10
1 A White/Blue
Wire Color Signal No.
No. Signal Color Wire
The shield is connected to the hood by a clamp.
(The wire color White/Blue indicates the colors of the band and insulation.)
(crimped)
1 E24V White/Orange
1
9
1
13
14
26
18
L
6
(ø10)
Controller side Mechanical side
(13)
(41) (14)
(37)
(Front view)
(8)
(15)
(18)
(25)
White/Orange
White/Green
Brown/Blue
Brown/Yellow
Brown/Red
Brown/Black
White/Blue
White/Yellow
White/Red
White/Black
White/Purple
White/Gray
Orange
Green
Purple
Gray
Red
Black
Blue
Yellow
E24V
0V
LS
CREEP
OT
RSV
A+
A−
B+
B−
Z+
Z−
SRD+
SRD−
BAT+
BAT−
VCC
GND
BKR−
BKR+
11
12
13
26
25
24
23
9
18
19
12345678
14
15
16
17
20
21
22
23456
23456789
10
11
12
13
14
15
16
17
18
0V
LS
CREEP
OT
RSV
ABBZZ
FG
SD
SD
BAT+
BAT−
VCC
GND
BK−
BK+
White/Green
Brown/Blue
Brown/Yellow
Brown/Red
Brown/Black
White/Yellow
White/Red
White/Black
White/Purple
White/Gray
Ground
Orange
Green
Purple
Gray
Red
Black
Blue
Yellow
Min. bend radius r = 50 mm or larger (when movable type is used)
* Only the robot cable is to be used in a cable track.
Min. bend radius r = 50 mm or larger (when movable type is used)
* Only the robot cable is to be used in a cable track.
Slider
Type
Mini
Standard
Controllers
Integrated
Rod
Type
Mini
Standard
Controllers
Integrated
Table/Arm
/Flat Type
Mini
Standard
Gripper/
Rotary Type
Linear Servo
Type
Cleanroom
Type
Splash-Proof
Controllers
PMEC
/AMEC
PSEP
/ASEP
ROBO
NET
ERC2
PCON
ACON
SCON
PSEL
ASEL
SSEL
XSEL
Pulse Motor
Servo Motor
(24V)
Servo Motor
(200V)
Linear
Servo Motor
SSEL Controller
Sold Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com