Hytec projects
•Download as PPTX, PDF•
1 like•610 views
This document provides an overview of various industrial projects in Ghana related to materials handling, mining, oil and gas, and other heavy industries. It briefly describes several projects involving cranes, feeders, stackers, reclaimers, loaders, and other hydraulic equipment used for handling materials like coal, iron ore, and minerals. Key details provided on each project include installed power levels, throughput capacities, operating speeds, and redundancy features of the hydraulic systems.
Report
Share
Report
Share
Recommended
Taifun_E
The document summarizes the TAIFUN centrifugal pump concept, which uses a rotating magnetic field to drive the pump impeller synchronously like a magnetic coupling, but with the motor integrated in a canned design for safety. Key advantages are high efficiency due to synchronous operation, compact design, double safety barriers, and ability to customize flow with variable speed control. Initial prototypes were tested successfully in 2001 and the pump design has advantages over conventional canned motor pumps for chemical applications requiring temperatures up to 150°C.
CHP
The document discusses the capacity and layout of a coal handling plant (CHP) that transports coal from mines to coal bunkers. The CHP has two stages. Stage 1 has a capacity of 1250 MT/hr and Stage 2 has a capacity of 1500 MT/hr. The CHP uses conveyor belts, coal crushers, bunkers, and stockpiles to receive, transport, store and reclaim coal to maintain the correct size, quality and quantity of coal. It also provides specifications for the conveyor belts, crushers, drives and other equipment used in the CHP.
COAL HANDLING DIVISION/PLANT, ANPARA
The document provides an overview of the coal handling plant (CHP) at Anpara Thermal Power Station in Uttar Pradesh, India. It discusses the basic processes in a CHP, including receiving coal via rail or conveyor, crushing the coal, transporting it to bunkers via conveyor belts and trippers, and storing excess coal via stacking and reclaiming. The CHP handles coal from receipt to transporting it to boilers and bunkers. It also processes raw coal to the required size for boiler operations. The CHP faces various challenges like design issues due to lower quality coal, problems during monsoon season, and mechanical failures of equipment.
Automotive Systems course (Module 09) - Ignition Systems for Internal Combus...
This presentation is dedicated to ignition systems for Internal Combustion Engines (ICE). The Ignition System is paramount for every car, motorcycle, truck or bus that runs an ICE based on gasoline, alcohol or Liquefied Petroleum Gas (LPG). It controls the timings when the spark plugs are fired, therefore igniting the air-fuel mixture in the combustion chamber. The Ignition System is one of the major players in what concerns the performance of the engine in terms of output power, pollutant emissions and fuel consumption.
Coal Handling Plant
The document summarizes the coal handling plant for a thermal power plant consisting of 4 units of 250MW capacity each. The coal will be brought from nearby captive mines via conveyor system and dumpers. The coal handling plant equipment will operate 24 hours a day and includes coal crushers, conveyor belts, stacker-reclaimers, tripper, samplers, and magnets to transport coal from the mines to the plant bunkers and boilers. Instrumentation and controls are provided to monitor and operate the coal handling system.
Coal Handling Plant
This document provides an overview of the Kota Super Thermal Power Plant located on the left bank of the Chambal River in India. It has a total generation capacity of 1240MW produced across 6 units. The plant uses coal as its fuel, which is supplied via rail from nearby mines. The coal handling plant is described as the "heart" of the thermal power plant. It unloads coal from trains, crushes it to 20mm size, conveys it using belt conveyors and feeders, and stores it until it is used as fuel in the plant's boilers.
Planning a coal handling plant
This document describes the key components and operations of a coal handling plant. The plant includes systems for unloading, conveying, crushing, feeding, stacking, weighing, sampling, fire suppression and dust control of coal. It conveys coal through conveyors, feeders, vibratory screens and crushers to stockpiles. Safety systems include pull cords, belt sway switches and zero speed switches. The plant is operated according to safety procedures to start and stop equipment sequentially and check for obstructions and proper functioning of protections.
Coal handling plant
This document provides information about a coal handling plant (CHP) at a thermal power station. It discusses the general working of a CHP, including receiving coal via various transportation methods, crushing and sizing the coal, storing it in bunkers, and sending it to coal mills. It also addresses common problems faced at CHPs, such as design issues, rainy season challenges, and equipment failures. Additionally, the document proposes designs for managing dust at different stages of the CHP process, such as adding moisture, using wind breaks, compacting coal piles, and installing a wet dust collector to reduce water consumption and dust levels.
Recommended
Taifun_E
The document summarizes the TAIFUN centrifugal pump concept, which uses a rotating magnetic field to drive the pump impeller synchronously like a magnetic coupling, but with the motor integrated in a canned design for safety. Key advantages are high efficiency due to synchronous operation, compact design, double safety barriers, and ability to customize flow with variable speed control. Initial prototypes were tested successfully in 2001 and the pump design has advantages over conventional canned motor pumps for chemical applications requiring temperatures up to 150°C.
CHP
The document discusses the capacity and layout of a coal handling plant (CHP) that transports coal from mines to coal bunkers. The CHP has two stages. Stage 1 has a capacity of 1250 MT/hr and Stage 2 has a capacity of 1500 MT/hr. The CHP uses conveyor belts, coal crushers, bunkers, and stockpiles to receive, transport, store and reclaim coal to maintain the correct size, quality and quantity of coal. It also provides specifications for the conveyor belts, crushers, drives and other equipment used in the CHP.
COAL HANDLING DIVISION/PLANT, ANPARA
The document provides an overview of the coal handling plant (CHP) at Anpara Thermal Power Station in Uttar Pradesh, India. It discusses the basic processes in a CHP, including receiving coal via rail or conveyor, crushing the coal, transporting it to bunkers via conveyor belts and trippers, and storing excess coal via stacking and reclaiming. The CHP handles coal from receipt to transporting it to boilers and bunkers. It also processes raw coal to the required size for boiler operations. The CHP faces various challenges like design issues due to lower quality coal, problems during monsoon season, and mechanical failures of equipment.
Automotive Systems course (Module 09) - Ignition Systems for Internal Combus...
This presentation is dedicated to ignition systems for Internal Combustion Engines (ICE). The Ignition System is paramount for every car, motorcycle, truck or bus that runs an ICE based on gasoline, alcohol or Liquefied Petroleum Gas (LPG). It controls the timings when the spark plugs are fired, therefore igniting the air-fuel mixture in the combustion chamber. The Ignition System is one of the major players in what concerns the performance of the engine in terms of output power, pollutant emissions and fuel consumption.
Coal Handling Plant
The document summarizes the coal handling plant for a thermal power plant consisting of 4 units of 250MW capacity each. The coal will be brought from nearby captive mines via conveyor system and dumpers. The coal handling plant equipment will operate 24 hours a day and includes coal crushers, conveyor belts, stacker-reclaimers, tripper, samplers, and magnets to transport coal from the mines to the plant bunkers and boilers. Instrumentation and controls are provided to monitor and operate the coal handling system.
Coal Handling Plant
This document provides an overview of the Kota Super Thermal Power Plant located on the left bank of the Chambal River in India. It has a total generation capacity of 1240MW produced across 6 units. The plant uses coal as its fuel, which is supplied via rail from nearby mines. The coal handling plant is described as the "heart" of the thermal power plant. It unloads coal from trains, crushes it to 20mm size, conveys it using belt conveyors and feeders, and stores it until it is used as fuel in the plant's boilers.
Planning a coal handling plant
This document describes the key components and operations of a coal handling plant. The plant includes systems for unloading, conveying, crushing, feeding, stacking, weighing, sampling, fire suppression and dust control of coal. It conveys coal through conveyors, feeders, vibratory screens and crushers to stockpiles. Safety systems include pull cords, belt sway switches and zero speed switches. The plant is operated according to safety procedures to start and stop equipment sequentially and check for obstructions and proper functioning of protections.
Coal handling plant
This document provides information about a coal handling plant (CHP) at a thermal power station. It discusses the general working of a CHP, including receiving coal via various transportation methods, crushing and sizing the coal, storing it in bunkers, and sending it to coal mills. It also addresses common problems faced at CHPs, such as design issues, rainy season challenges, and equipment failures. Additionally, the document proposes designs for managing dust at different stages of the CHP process, such as adding moisture, using wind breaks, compacting coal piles, and installing a wet dust collector to reduce water consumption and dust levels.
Best ppt on Presentation on Coal handling plant
This document provides an overview of a coal handling plant (CHP). It discusses what a CHP is, its main components and processes. The key points covered include:
- A CHP receives, processes, stores and feeds coal to boiler bunkers. Its main goal is to supply processed coal to coal mills.
- Main components include wagon tipplers, crushers, conveyor belts, feeders, bunkers. Coal is crushed to different sizes and conveyed to bunkers or storage.
- Coal is transported mainly by railways in wagons and unloaded by rotary or side tipplers. Other transport modes include ropeways and road.
- The document outlines the operating sequence,
Chp ppt
The document provides details about the construction and working of a coal handling plant (CHP). It discusses key components of a CHP including wagon tipplers for unloading coal, conveyor belts for transporting coal, and three stages of crushers to reduce the size of coal pieces. The operational cycles of bunkering, stacking, and reclaiming coal are also summarized. The CHP properly handles and processes coal from receipt to transferring it to bunkers to supply coal to boiler operations.
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
NTPC is India's largest power company established in 1975. NTPC operates the 2600 MW Korba Super Thermal Power Plant located in Chhattisgarh, India. The plant sources coal from local mines using a merry-go-round rail system. The coal is crushed and milled before being burned in the boiler to produce steam that drives the turbine generator, producing electricity. Flue gases pass through an electrostatic precipitator before being released through the chimney. The generator outputs electricity at 15.75 kV which is stepped up to 400 kV by transformers before connecting to the transmission grid.
Thermal power plant overview
This ppt will be simply showing you the basic overview of any thermal power plant i.e you simply know about the basic means what happened in any power plant
COAL HANDLING PLANT
The document summarizes the key components and operation of a coal handling plant (CHP) at a thermal power station. The CHP receives raw coal and processes it before transporting it to the boiler. The main components of the CHP include hoppers, conveyor belts, vibrating feeders, crushers, bunkers, and magnetic separators. The coal is crushed into a powder, stored in bunkers, then fed into the boiler to generate steam and power. Safety is also emphasized, including inspecting equipment for damage and implementing various non-destructive testing methods.
Presentation on coal handling systems
This document provides an overview of coal handling systems used in coal power plants. It discusses key components like stockpiles, stacker/reclaimers, belt feeders, conveyors, and the control systems used. Stockpiles provide surge capacity and are formed using stackers and reclaimed using reclaimers. Belt feeders carry coal from crushers to conveyors. Safety interlocks and procedures are described for operating components like feeders, conveyors, and stacker/reclaimers to handle coal safely and effectively throughout the coal handling process.
6 weeks it on ntpc
The document provides an overview of the coal handling plant (CHP) at the Nabinagar Power Generating Company located in Bihar, India. The CHP processes 5 million tonnes of coal per year received via wagons to supply coal bunkers for boiler operations at the power plant. The CHP includes a wagon tippler, crushers, conveyor belts, vibrating screens, and bunkers to receive, crush, transport, and store coal prior to feeding the coal mills and furnaces. The document also discusses the transportation, storage, grading, and utilization of coal in thermal power plants in India.
Handling of coal in thermal power plant
Thermal power plants rely heavily on coal as their primary fuel source. Coal handling involves transporting coal from mines to the plant via waterways, rail, road, ropeways or pipelines. At the plant, coal is unloaded and stored either outdoors in piles or heaps, underwater, or in live storage bunkers. Effective coal storage aims to prevent self-ignition through compacting piles and sealing layers to restrict air flow, while live storage supplies coal directly to combustion without mobile equipment. Proper coal handling and storage is critical to ensuring reliable fuel supply for thermal power generation.
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
This document is a project report submitted by Harshit Kumar Gupta towards the completion of his vocational training at NTPC Sipat power plant. It includes declarations by the student and certificates from his project guide. It then provides acknowledgments and summaries of the key components of the power plant including the coal handling plant, boiler, turbine, generator, condenser, cooling tower, and ash handling plant.
SUMMER TRAINING AT NTPC DADRI GAS SECTION
The document provides an overview of NTPC, India's largest power company, and details about gas power plants and combined cycle power plants. It describes the key components and processes, including gas turbines, heat recovery steam generators, steam turbines, and the Brayton and Rankine cycles. Specifically, it explains how compressed air is heated in a gas turbine to drive a generator, before its waste heat is used to generate high pressure steam to drive a steam turbine. Together, the gas and steam turbines can produce up to 600 megawatts of electricity in a combined cycle configuration. The document also outlines NTPC's emissions controls and cooling systems to reduce environmental impacts.
Summer training at NTPC Badarpur ppt
The document provides information about NTPC Badarpur power plant located in India. It has a total installed capacity of 2637 MW including:
- 1820 MW from 6 units of coal-based thermal plant
- 817 MW from 6 units of gas-based thermal plant
It describes the key components and processes involved in thermal power generation including coal handling, pulverization, steam generation in boilers, power generation in turbines connected to generators, and condensing steam back to water in condensers. The power plant sources coal from local mines and water from a nearby canal to operate its thermal power generation operations.
Description of Enefit-280 technology
The document discusses the development of a dynamic simulation model for Enefit280, a next generation oil shale processing plant. A dynamic model was needed (1) to test plant behavior like start-up and shutdown before commissioning, (2) optimize control strategies, and (3) form the basis for an operator training simulator. The model includes over 100 equipment items and control loops. Results showed smoother plant behavior during start-up and validated control parameters. Future work will verify the model against real plant data and further develop it based on commissioning experiences.
TTECH Gas Micro-Turbine
TTEC's plasma pulse shock wave gas turbine generator can generate power from 5 kW to 100 MW with 60% thermal efficiency without waste heat recuperation. It uses self-sustaining detonation combustion at 2000 deg F and over 400 cycles per second to eliminate the need for a compressor section. The turbine can produce near peak torque at low RPMs compared to conventional turbines. It directly couples a high-speed permanent magnet generator, eliminating the need for a gearbox. The simpler design is 40% smaller and less costly than conventional gas turbines.
Automotive Systems course (Module 06) - Power Transmission Systems in road ve...
The document describes the main components of a vehicle drivetrain system. It discusses the different configurations including rear-wheel drive, front-wheel drive, and all-wheel drive. It then focuses on the clutch assembly and transmission, explaining manual and automatic transmissions. For automatic transmissions, it describes the planetary gear set and how gear ratios are calculated by locking different elements in an automatic transmission.
Ntpc dadri ppt
The document reports on the generation of thermal power at NTPC Dadri power plant. It describes the key components of a thermal power plant including the boiler, turbine, condenser and other equipment. The working of the power plant is explained starting from the burning of coal to produce steam and ending with the generation of electricity via the steam turbine connected to an alternator.
Abdul hadi rahmani presentation (2018 19)at ntpc gas power plant dadri
This document provides an overview of the NTPC Dadri Gas Power Station in India. It discusses the various power generation capacities including 817MW from gas turbines. The station uses a combined cycle with both gas turbines and steam turbines to increase overall efficiency. It describes the basic Brayton and Rankine cycles used in the plant and highlights components like the compressor, combustor, turbine, waste heat recovery boiler, condenser, and cooling tower. The summary briefly outlines some advantages and disadvantages of the gas turbines used at the plant. It also discusses how power is transmitted from the generators to the grid through transformers and a switchyard, and how the control room monitors and operates the entire facility.
NTPC DADRI THERMAL PLANT PPT
The document provides information about the NTPC Dadri power plant located in Uttar Pradesh, India. It has a coal-fired thermal power plant with a capacity of 1820 MW as well as a gas-fired plant of 817 MW and a 5 MW solar plant, totaling 2642 MW. The power plant uses a steam turbine generator process to convert the heat energy from coal combustion into electrical energy. It also discusses the various units involved in this process like the boiler, turbine, alternator, condenser, and cooling towers. The control and instrumentation department works to monitor and control parameters across the plant to ensure safe and efficient operations.
Termal ppt
This document provides an overview of how a thermal power plant works. It begins with an introduction that defines a thermal power plant as a power station that converts heat energy into electric power, typically using steam to spin turbines connected to generators. It then describes the main components of a thermal power plant, including the steam turbine generator, boiler make-up water treatment plant, fuel preparation system, oil system, barring gear, and generator cooling. The document also lists some advantages and disadvantages of thermal power plants and provides references at the end.
Philippe Anglaret the VP Business Development for Alstom Nuclear (Atoms for t...
Philippe Anglaret the VP Business Development for Alstom Nuclear (Atoms for t...Société Française d'Energie Nucléaire
Philippe ANGLARET, the VP Business Development for Alstom Nuclear, presented the Turbine Island with its different characteristics and very impressive pictures.Training presentation
Indraprastha Power Generation Co Ltd (IPGCL) and Pragati Power Corporation Ltd (PPCL) were formed in 2002 when the Delhi Vidyut Board was unbundled. IPGCL and PPCL own and operate various power plants in Delhi including gas turbine plants such as GTPS and combined cycle plants such as Pragati-I. The document provides an overview of the different power plants, their specifications and components such as gas turbines, steam turbines, generators and switchyards.
More Related Content
What's hot
Best ppt on Presentation on Coal handling plant
This document provides an overview of a coal handling plant (CHP). It discusses what a CHP is, its main components and processes. The key points covered include:
- A CHP receives, processes, stores and feeds coal to boiler bunkers. Its main goal is to supply processed coal to coal mills.
- Main components include wagon tipplers, crushers, conveyor belts, feeders, bunkers. Coal is crushed to different sizes and conveyed to bunkers or storage.
- Coal is transported mainly by railways in wagons and unloaded by rotary or side tipplers. Other transport modes include ropeways and road.
- The document outlines the operating sequence,
Chp ppt
The document provides details about the construction and working of a coal handling plant (CHP). It discusses key components of a CHP including wagon tipplers for unloading coal, conveyor belts for transporting coal, and three stages of crushers to reduce the size of coal pieces. The operational cycles of bunkering, stacking, and reclaiming coal are also summarized. The CHP properly handles and processes coal from receipt to transferring it to bunkers to supply coal to boiler operations.
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
NTPC is India's largest power company established in 1975. NTPC operates the 2600 MW Korba Super Thermal Power Plant located in Chhattisgarh, India. The plant sources coal from local mines using a merry-go-round rail system. The coal is crushed and milled before being burned in the boiler to produce steam that drives the turbine generator, producing electricity. Flue gases pass through an electrostatic precipitator before being released through the chimney. The generator outputs electricity at 15.75 kV which is stepped up to 400 kV by transformers before connecting to the transmission grid.
Thermal power plant overview
This ppt will be simply showing you the basic overview of any thermal power plant i.e you simply know about the basic means what happened in any power plant
COAL HANDLING PLANT
The document summarizes the key components and operation of a coal handling plant (CHP) at a thermal power station. The CHP receives raw coal and processes it before transporting it to the boiler. The main components of the CHP include hoppers, conveyor belts, vibrating feeders, crushers, bunkers, and magnetic separators. The coal is crushed into a powder, stored in bunkers, then fed into the boiler to generate steam and power. Safety is also emphasized, including inspecting equipment for damage and implementing various non-destructive testing methods.
Presentation on coal handling systems
This document provides an overview of coal handling systems used in coal power plants. It discusses key components like stockpiles, stacker/reclaimers, belt feeders, conveyors, and the control systems used. Stockpiles provide surge capacity and are formed using stackers and reclaimed using reclaimers. Belt feeders carry coal from crushers to conveyors. Safety interlocks and procedures are described for operating components like feeders, conveyors, and stacker/reclaimers to handle coal safely and effectively throughout the coal handling process.
6 weeks it on ntpc
The document provides an overview of the coal handling plant (CHP) at the Nabinagar Power Generating Company located in Bihar, India. The CHP processes 5 million tonnes of coal per year received via wagons to supply coal bunkers for boiler operations at the power plant. The CHP includes a wagon tippler, crushers, conveyor belts, vibrating screens, and bunkers to receive, crush, transport, and store coal prior to feeding the coal mills and furnaces. The document also discusses the transportation, storage, grading, and utilization of coal in thermal power plants in India.
Handling of coal in thermal power plant
Thermal power plants rely heavily on coal as their primary fuel source. Coal handling involves transporting coal from mines to the plant via waterways, rail, road, ropeways or pipelines. At the plant, coal is unloaded and stored either outdoors in piles or heaps, underwater, or in live storage bunkers. Effective coal storage aims to prevent self-ignition through compacting piles and sealing layers to restrict air flow, while live storage supplies coal directly to combustion without mobile equipment. Proper coal handling and storage is critical to ensuring reliable fuel supply for thermal power generation.
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
This document is a project report submitted by Harshit Kumar Gupta towards the completion of his vocational training at NTPC Sipat power plant. It includes declarations by the student and certificates from his project guide. It then provides acknowledgments and summaries of the key components of the power plant including the coal handling plant, boiler, turbine, generator, condenser, cooling tower, and ash handling plant.
SUMMER TRAINING AT NTPC DADRI GAS SECTION
The document provides an overview of NTPC, India's largest power company, and details about gas power plants and combined cycle power plants. It describes the key components and processes, including gas turbines, heat recovery steam generators, steam turbines, and the Brayton and Rankine cycles. Specifically, it explains how compressed air is heated in a gas turbine to drive a generator, before its waste heat is used to generate high pressure steam to drive a steam turbine. Together, the gas and steam turbines can produce up to 600 megawatts of electricity in a combined cycle configuration. The document also outlines NTPC's emissions controls and cooling systems to reduce environmental impacts.
Summer training at NTPC Badarpur ppt
The document provides information about NTPC Badarpur power plant located in India. It has a total installed capacity of 2637 MW including:
- 1820 MW from 6 units of coal-based thermal plant
- 817 MW from 6 units of gas-based thermal plant
It describes the key components and processes involved in thermal power generation including coal handling, pulverization, steam generation in boilers, power generation in turbines connected to generators, and condensing steam back to water in condensers. The power plant sources coal from local mines and water from a nearby canal to operate its thermal power generation operations.
Description of Enefit-280 technology
The document discusses the development of a dynamic simulation model for Enefit280, a next generation oil shale processing plant. A dynamic model was needed (1) to test plant behavior like start-up and shutdown before commissioning, (2) optimize control strategies, and (3) form the basis for an operator training simulator. The model includes over 100 equipment items and control loops. Results showed smoother plant behavior during start-up and validated control parameters. Future work will verify the model against real plant data and further develop it based on commissioning experiences.
TTECH Gas Micro-Turbine
TTEC's plasma pulse shock wave gas turbine generator can generate power from 5 kW to 100 MW with 60% thermal efficiency without waste heat recuperation. It uses self-sustaining detonation combustion at 2000 deg F and over 400 cycles per second to eliminate the need for a compressor section. The turbine can produce near peak torque at low RPMs compared to conventional turbines. It directly couples a high-speed permanent magnet generator, eliminating the need for a gearbox. The simpler design is 40% smaller and less costly than conventional gas turbines.
Automotive Systems course (Module 06) - Power Transmission Systems in road ve...
The document describes the main components of a vehicle drivetrain system. It discusses the different configurations including rear-wheel drive, front-wheel drive, and all-wheel drive. It then focuses on the clutch assembly and transmission, explaining manual and automatic transmissions. For automatic transmissions, it describes the planetary gear set and how gear ratios are calculated by locking different elements in an automatic transmission.
Ntpc dadri ppt
The document reports on the generation of thermal power at NTPC Dadri power plant. It describes the key components of a thermal power plant including the boiler, turbine, condenser and other equipment. The working of the power plant is explained starting from the burning of coal to produce steam and ending with the generation of electricity via the steam turbine connected to an alternator.
Abdul hadi rahmani presentation (2018 19)at ntpc gas power plant dadri
This document provides an overview of the NTPC Dadri Gas Power Station in India. It discusses the various power generation capacities including 817MW from gas turbines. The station uses a combined cycle with both gas turbines and steam turbines to increase overall efficiency. It describes the basic Brayton and Rankine cycles used in the plant and highlights components like the compressor, combustor, turbine, waste heat recovery boiler, condenser, and cooling tower. The summary briefly outlines some advantages and disadvantages of the gas turbines used at the plant. It also discusses how power is transmitted from the generators to the grid through transformers and a switchyard, and how the control room monitors and operates the entire facility.
NTPC DADRI THERMAL PLANT PPT
The document provides information about the NTPC Dadri power plant located in Uttar Pradesh, India. It has a coal-fired thermal power plant with a capacity of 1820 MW as well as a gas-fired plant of 817 MW and a 5 MW solar plant, totaling 2642 MW. The power plant uses a steam turbine generator process to convert the heat energy from coal combustion into electrical energy. It also discusses the various units involved in this process like the boiler, turbine, alternator, condenser, and cooling towers. The control and instrumentation department works to monitor and control parameters across the plant to ensure safe and efficient operations.
Termal ppt
This document provides an overview of how a thermal power plant works. It begins with an introduction that defines a thermal power plant as a power station that converts heat energy into electric power, typically using steam to spin turbines connected to generators. It then describes the main components of a thermal power plant, including the steam turbine generator, boiler make-up water treatment plant, fuel preparation system, oil system, barring gear, and generator cooling. The document also lists some advantages and disadvantages of thermal power plants and provides references at the end.
Philippe Anglaret the VP Business Development for Alstom Nuclear (Atoms for t...
Philippe Anglaret the VP Business Development for Alstom Nuclear (Atoms for t...Société Française d'Energie Nucléaire
Philippe ANGLARET, the VP Business Development for Alstom Nuclear, presented the Turbine Island with its different characteristics and very impressive pictures.Training presentation
Indraprastha Power Generation Co Ltd (IPGCL) and Pragati Power Corporation Ltd (PPCL) were formed in 2002 when the Delhi Vidyut Board was unbundled. IPGCL and PPCL own and operate various power plants in Delhi including gas turbine plants such as GTPS and combined cycle plants such as Pragati-I. The document provides an overview of the different power plants, their specifications and components such as gas turbines, steam turbines, generators and switchyards.
What's hot (20)
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
NTPC KORBA CHHATTISGARH coal to electricity by tejasvi anant (tan 90')
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
Automotive Systems course (Module 06) - Power Transmission Systems in road ve...
Automotive Systems course (Module 06) - Power Transmission Systems in road ve...
Abdul hadi rahmani presentation (2018 19)at ntpc gas power plant dadri
Abdul hadi rahmani presentation (2018 19)at ntpc gas power plant dadri
Philippe Anglaret the VP Business Development for Alstom Nuclear (Atoms for t...
Philippe Anglaret the VP Business Development for Alstom Nuclear (Atoms for t...
Viewers also liked
Ролевые игры,игры и игрушки для детей GIOCHI PREZIOSI Оригинальный товар от к...
Ролевые игры,игры и игрушки для детей GIOCHI PREZIOSI Оригинальный товар от к...P.L.T. Forniture Industriali S.r.l.
Ролевые игры,игры и игрушки для детей GIOCHI PREZIOSI Оригинальный товар от компании Stockist.itJoe Staiber Profile
Joe Staiber is a 10-year veteran at EMC who has consistently exceeded sales quotas. He has expertise in developing go-to-market strategies and is viewed as an industry leader in backup and data de-duplication. Staiber has received numerous awards for his performance and has generated over $100 million in revenue for EMC during his career.
Opleidingenkalender 2016 - personeelsplanning en management
Opleidingenkalender 2016 Déhora - opleidingen, seminaries en workshop in personeelsplanning en personeelsinzet.
Déhora biedt u meer dan 28 jaar expertise in personeelsplanning en management van personeelsinzet
Een goede personeelsplanning of workforce planning bespaart niet alleen personeelskosten, maar leidt ook tot betere kwaliteit en vitaliteit van medewerkers. Gemotiveerde medewerkers op de juiste plaats en op het juiste moment aan het werk, dat is de kern waar het om draait. Het is voor iedere organisatie absoluut de moeite waard om te investeren in een goede personeelsplanning en alles wat daarmee samenhangt.
Daarom organiseert Déhora verschillende workshops, avondseminaries en masterclasses voor zowel personeelsplanners als voor managers en afdelingshoofden. Per slot van rekening hebben niet alleen planners te maken met (bepaalde onderdelen van) personeelsplanning. Zo zijn bijvoorbeeld de masterclass 'Strategische Personeelsplanning' en het avondseminarie ‘Winst met flexibele ploegenroosters’ eerder gericht op managers en HR-functionarissen.
MOAND Poster PDF_FINAL
A 12-week nutrition education program was implemented for 58 college athletes at Southeast Missouri State University. Registered dietitians led 30-minute weekly sessions covering topics like MyPlate, nutrition labels, fueling for exercise and recovery. Pre and post-tests assessed changes in nutrition knowledge. Softball players significantly improved their knowledge of macronutrients, weight maintenance, carbohydrates and NCAA supplement regulations. Baseball players significantly improved their knowledge of MyPlate, carbohydrates, fluids and weight maintenance. The program significantly increased athletes' nutrition knowledge.
Texto3 P7
El mito de Orestes trata sobre el hijo de Agamenón y Clitemnestra que vengó la muerte de su padre matando a su madre y a su amante Egisto. Perseguido por las Furias, Orestes fue juzgado en Atenas y absuelto gracias al voto de Atenea. A pesar de ello, algunas Furias continuaron su persecución hasta que Orestes robó una estatua sagrada con la ayuda de su hermana Ifigenia, terminando así con su acoso.
Status of offshore jack ups
This document provides a status report of offshore jackups in the Middle East as of July 2016. It lists 81 rigs that are currently drilling, 30 rigs that are ready stacked, 5 rigs that are cold stacked, and 9 rigs that are under construction at various locations in the UAE, Qatar, Saudi Arabia, and Bahrain. The document categorizes the rigs by their manager and status (drilling, ready stacked, cold stacked, under construction), and provides their specific location.
Het tijddossier strategische personeelsplanning
“Plannen is beslissen over een onzekere toekomst.”
Strategische personeelsplanning (SPP) is een toekomstgerichte activiteit waarbij nu besluiten moeten worden genomen over de inzet van de juiste mensen, op het juiste moment en de juiste plaats. Dankzij een continue afstemming tussen de koers die u als organisatie wilt varen, en de kwantitatieve en kwalitatieve samenstelling van uw personeel, is strategische personeelsplanning een uitstekend hulpmiddel voor een optimale personeelsbezetting. Nu en in de toekomst.
“De toegevoegde waarde van Strategische Personeelsplanning is meer dan geld.”
Het afstemmen van het menselijk kapitaal op de organisatiestrategie levert zowel directe kostenbesparingen als productiviteitsverbeteringen op. Denk bijvoorbeeld aan een betere afstemming van vraag en aanbod van werk of aan het terugdringen van te weinig of te veel ondergekwalificeerd of juist overgekwalificeerd personeel. Daarnaast levert een duurzame inzet van mensen ook een hogere tevredenheid en loyaliteit op die de businesscase voor strategische personeelsplanning compleet maken.
“Strategische Personeelsplanning is een proces en niet een project.”
Alhoewel de opzet en inrichting van strategische personeelsplanning projectmatig aangepakt kan worden, zal SPP uiteindelijk onderdeel moeten worden van het strategische- en financiële planproces van een organisatie. Op de lange termijn zijn het immers de juiste mensen die strategieën realiseren en zullen de kosten daarvan verantwoord moeten worden. De kracht van SPP zit ook in een Plan-Do-Check-Act-cyclus, waarbij aanpassing van het menselijk kapitaal aan de strategie en omgeving van de organisatie centraal staat.
“Strategische Personeelsplanning is een kleurrijke verandering.”
Naast een planmatig op feiten gebaseerd (analytics) proces is Strategische Personeelsplanning ook het bewuster en bekwamer maken van mensen als het bijvoorbeeld gaat om het voorspellen van werkaanbod. Het gaat daarnaast om de ontwikkeling van skills en competenties, en om belangen af te wegen zoals het collectieve bedrijfsbelang en het individuele werknemersbelang. Met SPP worden mensen in hun kracht (engagement) gezet om duurzaam inzetbaar te blijven. Deze veelheid aan doelen en belangen vraagt om een brede kijk op dit vraagstuk en op een veranderkundige aanpak bij het inrichten en implementeren van Strategische Personeelsplanning
Community Based Water Resource Management PRESENTATION
This document describes a community-based water resource management project in three villages in Burkina Faso. The project trains community members to monitor local rainfall and groundwater levels. Community members collect and analyze the data, and make decisions to sustainably manage water resources. The project also establishes monitoring committees with representatives from communities, local governments, NGOs, and national agencies to coordinate efforts. Preliminary results show communities are better able to understand threats to their water resources and make informed management decisions. Key challenges include sustaining community member participation and ensuring local authorities support the approach long-term.
Offshore packages
This document provides an overview of offshore platforms used for oil and gas exploration and production. It discusses the different types of offshore platforms including jacketed platforms, jack-up platforms, drillships, wellhead platforms, and process platforms. Jacketed platforms are the most common type used in moderate water depths up to 350 meters. The document also describes the key components and processes involved in offshore platforms, such as sea water treatment, produced water conditioning, and drilling equipment.
SMRP (1997) Proactive Maintenance Slides by John Day - 1997
John Day developed a proactive maintenance process in 1978 and manage maintenance and engineering at Alumax Mt. Holly and later at Alcoa Mt Holly for over 20 years. These are the slides he presented at the 1997 SMRP Conference. Great slides with great information. If you would like the slides and not PDF send me an email at rsmith@maintenancebestpractices.com. I worked for John Day back in the early 1980s which started my journey in Proactive Maintenance.
Science Fiction
The document discusses definitions of science fiction from various science fiction authors and experts. Isaac Asimov defines science fiction as literature that considers the impact of scientific advances on humans. Ray Bradbury says it is sociological studies of the future. Frederik Pohl says the future depicted should be possible or plausible. John Scalzi outlines three criteria for science fiction: it takes place in the future, uses technology that does not currently exist, and events are rationally based. The document also discusses the relationship between science fiction and fantasy.
Maintenance of Hydraulic Systems
This document discusses best practices for maintaining hydraulic systems. It emphasizes that contamination control is the number one priority and describes methods for preventing contamination such as using external filter pumps and handling components as if performing heart surgery. The document also stresses developing an effective preventive maintenance and predictive maintenance program for hydraulic systems, collecting hydraulic fluid samples, performing vibration and ultrasound analysis, and providing training to promote a culture change around maintenance of these systems.
Indian oil
This project report summarizes the history and operations of Indian Oil Corporation Limited (IOCL). IOCL was established in 1964 by merging Indian Refineries and Indian Oil Company to oversee petroleum operations in India. It is now India's largest commercial enterprise and one of the largest petroleum companies in the world, with a network of refineries, pipelines, and fuel stations across India. IOCL's vision is to become a major, diversified, transnational energy company playing a key role in India's oil security and distribution needs.
Aramco inspection handbook
This document provides guidance for inspectors on paints and coatings. It outlines approved coating systems for various applications and services, including internal and external pipe coatings for buried, insulated, and atmospheric exposure conditions. It also provides standards on surface preparation, coating application, thickness measurement, and repair. Inspectors are instructed to follow the coating manufacturer's recommendations and use properly calibrated equipment to ensure coatings meet thickness and cure requirements.
Basic hydraulics
Hydraulics today has become a way of life as most applications have some form of system ingrained. This paper is an endevor to present the very basics of hydraulics and overcome its basic fear.
Viewers also liked (19)
Ролевые игры,игры и игрушки для детей GIOCHI PREZIOSI Оригинальный товар от к...
Ролевые игры,игры и игрушки для детей GIOCHI PREZIOSI Оригинальный товар от к...
Opleidingenkalender 2016 - personeelsplanning en management
Opleidingenkalender 2016 - personeelsplanning en management
Community Based Water Resource Management PRESENTATION
Community Based Water Resource Management PRESENTATION
SMRP (1997) Proactive Maintenance Slides by John Day - 1997
SMRP (1997) Proactive Maintenance Slides by John Day - 1997
Similar to Hytec projects
Industrial training
NTPC Kanhia is a 3,010 MW coal-fired power plant located in Talcher, Odisha. It has 6 units of 500 MW each. The plant uses coal from local mines to generate electricity which is supplied to the eastern and southern grids. It has various systems like the coal handling plant, boilers, turbines, generators, condensers and switchyard to generate and supply power efficiently. NTPC aims to further expand renewable energy capacity at the site.
thermal power plant - GNDTP Bathinda
The document summarizes the ash handling plant at the Guru Nanak Dev Thermal Power Plant in Bathinda, India. It discusses that ash is a byproduct of coal combustion in thermal power plants. Large amounts of ash are produced daily, around 5000 tons for a 2000MW plant. The ash handling plant uses conveyor systems to transport ash either dry or wet to disposal sites. The dry ash system uses equipment like electrostatic precipitators, bag filter towers, and denseveyors to transport dry ash to silos.
Ntpc dadri
NTPC Dadri is a coal-based thermal power plant located in Uttar Pradesh, India. It has a total installed capacity of 2,642 MW from coal, gas, and solar sources. The coal-based plant consists of two stages with a total of 6 units, consuming 13,000 metric tons of coal per day from local mines. The plant uses a Rankine cycle to generate power, with coal being pulverized and used to produce high pressure steam in boilers that drives steam turbines connected to electric generators. Ash is disposed of using an efficient electrostatic precipitator and stored on-site. The plant also focuses on education, health, and fly ash utilization in the local community.
ppt on kota super thermal power plant
This document provides an overview of the Kota Super Thermal Power Station located on the Chambal river in Kota, India. It has a total installed capacity of 1240MW across 7 units of varying sizes commissioned between 1983-2009. The power station uses a coal-fired thermal process, with key components including the coal handling plant, boiler, superheater, steam turbine, economizer, generator, water treatment plant, and ash handling plant. It benefits from abundant cooling water from the river and good transportation access for coal and industry in the local region.
GANESH KUMAR RAM PPT ON TTPS LALPANIA
Tenughat Vidyut Nigam Limited owns and operates the 420MW Tenughat Thermal Power Station located in Jharkhand. The power station has two 210MW coal-fired generating units that meet the daily coal requirements of 7,000 metric tons from nearby coal mines. The document provides details about the various sections and equipment within the power plant, including the coal handling plant, boiler, steam turbine, generator, water treatment plant, and ash handling plant.
ritesh final project
This document provides information about a thermal power plant and analysis of fan vibration. It discusses the various components of the coal handling plant including the truck tippler, wagon tippler, crusher, and track hopper. It describes the working principles and specifications of the motors that operate equipment like the side arm charger, clamping system, and end disc of the wagon tippler. The document also summarizes the role of the paddle feeders in discharging coal from the underground track hopper.
Ntpc unchahar summer or vocational training ppt
NTPC Unchahar power plant has a total installed capacity of 1050MW from its coal-based thermal units. It sources coal from nearby mines and water from the Sharda Sahayak canal. The presentation summarized the key processes and components of a thermal power plant including coal handling, boiler, turbine, generator, condenser, cooling tower, and ash handling. The main departments of the plant work together to convert the heat energy from coal combustion into electrical energy through these processes.
Steam power plants
3.1 Steam power plant introduction, components, advantages and limitations.
3.2 Fuel handling system in power plant types and component
3.3 Electro-static precipitators.
3.4 Control systems of power plant elements, types, desirable
characteristics.
3.5 Steam temperature control and feed water control
3.6 Maintenance procedure of major components of steam power plant
A Presentation on Kota Super Thermal Power Station
The document provides information about the Kota Super Thermal Power Plant in India including its establishment, generation capacity, units and their installation details. It describes the main components of the plant including the coal handling plant, boiler, superheater, steam turbine, generator, water treatment plant, ash handling plant and control room. The coal handling plant section explains the wagon unloading, crushing and conveying systems. The document also provides diagrams to illustrate the layout and processes of the power plant.
Innovations and trend in metal mining & tunnellng
Underground mining technologies have advanced with innovations like raise boring, trackless haulage systems, ore sorting, tele-remote operation, and fuel cells. New methods access deeper ore bodies through declines and improve productivity with longer hole drilling, bulk explosives charging, and fully automated material handling. Monitoring systems and hydraulic roof supports enhance safety, while leaching and biotechnology may enable extraction from additional mineral deposits.
kota super thermal poer plant
The Kota Super Thermal Power Plant in Rajasthan has a total generation capacity of 1240 MW distributed across 7 stages commissioned between 1983-2009. It is located on the Chambal river and has abundant cooling water and good transportation access. The plant has a coal handling plant to receive and crush coal, boilers to generate steam, superheaters to further heat steam, turbines to convert steam energy to mechanical energy, generators to produce electricity, and auxiliary systems to treat water, handle ash, and control operations.
OVERVIEW OF SUPERCRITICAL THERMAL POWERPLANT , DPSTS
This document provides an overview of the 2*800 MW Sri Damodaram Sanjeevaiah Thermal Power Station under construction in Nellore, Andhra Pradesh. The key points are:
- It will have a total installed capacity of 1600 MW once both 800 MW units are operational. The project cost is 8432 crores.
- Coal from Talcher, Orissa will be the primary fuel. It will be pulverized and fed into the furnace using hot air and secondary air for complete combustion.
- Fly ash will be collected by electrostatic precipitators and silos, and used for cement, concrete and agricultural purposes. Water treatment plants will produce demineralized water.
KSTPS presentation.pptx
Kota Super Thermal Power Station is a coal-based power plant located in Kota, India. It has a total generation capacity of 1240MW from its units commissioned between 1983 and 2009. The power plant uses a coal handling plant to transport coal via conveyor belts to the boilers, which heat water to produce steam that drives turbines connected to generators. Key components include the boiler, superheater, economizer, air preheater, condenser, and ash handling system. Water is treated on site before being fed to the boilers. The control room monitors operations and measurements across the plant.
thermal power plant at NTPC
NTPC Dadri is a coal and gas-based thermal power plant located in Uttar Pradesh, India. It has a total installed capacity of 2,637 MW from 6 coal units and 6 gas units. The plant sources coal from Jharkhand and water from the Upper Ganga Canal. It operates by pulverizing coal, heating water into steam in a boiler, using the steam to spin turbines connected to a generator to produce electricity, and condensing the steam in a condenser to be reused. The plant helps contribute to over 3/5th of India's total power generation. Ash produced is utilized in construction, cement/brick manufacturing, and agriculture.
Richappt
NTPC Dadri is a coal and gas-based thermal power plant located in Uttar Pradesh, India. It has a total installed capacity of 2,637 MW consisting of 1,820 MW from its coal-based units and 817 MW from its gas-based units. The plant sources coal from Piparwara mines in Jharkhand and water from the Upper Ganga Canal. It operates using a conventional thermal power generation process where coal is pulverized and fired in a boiler to produce high pressure steam that drives turbines connected to generators to produce electricity. Ash produced from combustion is utilized in construction and manufacturing industries.
Coal based power plant
Coal-based thermal power plants generate electricity through a four stage process. In the first stage, coal is burned in a boiler to produce heat energy. In the second stage, this heat is used to convert water to high-pressure steam. The third stage involves using this steam to spin turbines connected to generators. Finally, in the fourth stage the rotational energy of the turbines is converted to electrical energy. Key components of coal power plants include the coal handling system, boiler, steam turbine, condenser, ash handling system, and electrical equipment. Newer ultra-supercritical technologies can improve the efficiency and reduce emissions of coal power generation.
Power resources in pakistan
Pakistan relies on both non-renewable and renewable resources for power generation. Non-renewable resources include coal, natural gas, crude oil, and liquefied petroleum gas. Coal is extracted through both surface mining and underground mining, and is used primarily for power generation as well as industries like cement, brick kilns and steel production. Natural gas and crude oil are extracted through drilling and are used for power generation, transportation fuel, and industrial processes. Electricity in Pakistan is generated by public sector utilities like WAPDA and K-Electric, as well as independent power producers. However, generation still falls short of demand, resulting in regular load shedding across the country.
NTPC,Dadri Training presentation
This document provides information about a presentation on summer training at the NTPC Dadri power plant. It discusses details about NTPC, including that it is India's largest power producer. It also provides specifics about the NTPC Dadri plant, including its total generation capacity of 2637 MW from coal and gas plants. The document then describes the various processes and equipment involved in thermal power generation, including coal handling, boiling, steam generation, power production via turbines and generators, and ash handling.
Thermal Power Simulator Training
The document provides information about a thermal power simulator training that took place at Essar Power Gujarat Ltd in Jamnagar, India. It acknowledges the organizers and mentors of the training. It then provides details about the Salaya power plant including its location, phases, capacity and key components. It describes the specifics of the 2x600 MW simulator used for training including its advantages. The document outlines the daily plan for the training and provides an overview of the key systems and circuits within the thermal power plant such as the boiler, turbine, generators, transformers and main circuits.
adi ntpc.pptx
This document provides an overview of the Feroze Gandhi Unchahar Thermal Power Station located in Uttar Pradesh, India. It has an installed capacity of 1550 MW distributed across 6 units ranging from 210-500 MW each. The plant uses coal from local mines to power steam turbines that generate electricity. It also includes descriptions of the key components and processes involved in coal handling, steam generation, power production, emission control, and ash management at the thermal power station.
Similar to Hytec projects (20)
A Presentation on Kota Super Thermal Power Station
A Presentation on Kota Super Thermal Power Station
Innovations and trend in metal mining & tunnellng
Innovations and trend in metal mining & tunnellng
OVERVIEW OF SUPERCRITICAL THERMAL POWERPLANT , DPSTS
OVERVIEW OF SUPERCRITICAL THERMAL POWERPLANT , DPSTS
Recently uploaded
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
欧洲杯投注-欧洲杯投注外围盘口-欧洲杯投注盘口app|【网址🎉ac22.net🎉】
【网址🎉ac22.net🎉】欧洲杯投注是体育博彩和在线赌场之一，得益于UKGC的三项许可。 成立之初是三名博彩公司将40家博彩商店的合并的结果，共同创建一家名为欧洲杯投注的公司。 欧洲杯投注在线赌场为游戏爱好者提供了300多种游戏，其中200多种老虎机，其他游戏包括二十一点，轮盘，真人荷官和真人赌场等。
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
The Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar.Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
Cover Story - China's Investment Leader - Dr. Alyce SU
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Recently uploaded (20)
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Cover Story - China's Investment Leader - Dr. Alyce SU
Cover Story - China's Investment Leader - Dr. Alyce SU
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Hytec projects
- 2. Mobile Steel Power Generation – Coal / Nuclear General Industry Marine Mining Materials handling Mining Oil & Gas
- 3. Offshore Points of Interest: • 2 x 32 ton Cranes - upgrade • Wellhead control panel • Fire pump system • Heave compensation system cylinder (Ø480/440x8000) • Accumulator (Ø500x5800 – 1140L) • Manifold repairs
- 4. Apron Feeder Drive Jwaneng Points of Interest: • 264 kW installed power • 4 rpm • 4000 tph • Dual drive
- 5. Circular Stacker Reclaimer Machine Points of Interest: • 400 tph coal stacker • Reclaims and stacks coal at the same time • Full standby hydraulic system for 24 hr operation
- 6. Clamshell system for Discard bin Points of Interest: • Dumps 170 tons of coal in 5 secs • Full emergency closure • System provides 250 kW of power with the accumulators installed
- 7. De Beers Sub-Sea Crawler Points of Interest: • 260 ton Crawler • Max 300 m depth • 2400 kW pump drive • Total electric power 3500 kW • Total hydraulic power 500 kW
- 8. Hydraulic Hammer – Khumani & Khulumela Mine Points of Interest: • Longest rock breaker in the world at Khulumela and Sishen Iron Ore Mine • 185 kW installed power • Electronic joystick control with RC6-9 controller
- 9. Sudan Dam Points of Interest: • Design, Manufacture and Installation • 12 Large scale hydraulic cylinder, power packs, linkage systems • 275 tons of equipment and electronic control system • Each cylinder weighing 13 tons • 12 power packs
- 10. Installation and Commissioning • Installation and commissioning of hydraulic pipe work and systems • Pressure testing and pipe flushing can be carried out at capacities of up to 4 200 litres per minute to ensure a safe and clean installation • Sophisticated in-line particle counters are used to detect hydraulic oil contaminants Points of Interest:
- 11. Iron Ore Stacker Machine Points of Interest: • 1400 tph • Dual redundant hydraulic system • Linear stacker for 1200 meter stockpile
- 12. Rapid Load Outstation Points of Interest: • Constant train loading at 0,6km/h • 100 ton loading capacity • Loading capacity with in 1% • 55 kW installed power • Hytec has provided hydraulic system for coal, iron ore, manganese and lime
- 13. Apron and Bolt Feeder Drives Points of Interest: • Total torque 1400 000 Nm • Largest Apron feeder in SA • 600 kW installed power • 1450 l/min oil flow • System supplied for Coal, Iron ore, Platinum and Diamond
- 14. Ship Loader Saldanha 10000 TPH Points of Interest: • 10 000 tph • Dual redundant hydraulic system • 90 kW installed power • 75 meter telescopic boom
- 15. Spile bar Actuators Points of Interest: • 10 ton push pull force • Compact and simple operating system • Unit can be purpose built
- 16. Stacker Reclaimer At Saldanha Points of Interest: • 10 000 tph • Redundant hydraulic system • Cylinder with ceramic coating • 132 kW installed power
- 17. Stock Pile Apron Feeder Points of Interest: • 220 kW installed power • 4500 tph capacity • Dual hydraulic drive • Shaft speed 8 rpm
- 18. Tailings Dump Spreader System Angola Points of Interest: • 90 kW installed power • Remotely controlled • 220 ton total weight
- 19. Traction Thickener Drive Points of Interest: • 100 meter tank diameter • Full electronic speed control integrated into plant control • Systems for optimized process control • Full redundant hydraulic system • Designed for 24 hr and 365 days
- 20. Train Tippler - Takoradi Points of Interest: • 40 ton tipping capacity • Upgraded from mechanical to hydraulic drive system • Increased offloading capacity by 50%
- 21. Containerized Power Packs Points of Interest: • V12 diesel engine + 2 x 355 cc/rev • 710 kW installed power • Winch application • Hytec manufactures purpose made containers
- 22. Ship Loaders – Iron ore – Coal- Ferrous metals Points of Interest: • Telescopic boom • Telescopic sprout • Accurate loading - low dust emission • Loading capacity 800- 1000 tph