GANESH KUMAR RAM PPT ON TTPS LALPANIA
•Download as PPTX, PDF•
3 likes•838 views
Tenughat Vidyut Nigam Limited owns and operates the 420MW Tenughat Thermal Power Station located in Jharkhand. The power station has two 210MW coal-fired generating units that meet the daily coal requirements of 7,000 metric tons from nearby coal mines. The document provides details about the various sections and equipment within the power plant, including the coal handling plant, boiler, steam turbine, generator, water treatment plant, and ash handling plant.
Report
Share
Report
Share
Recommended
TTPS
The document provides information about implant training at Tenughat Thermal Power Plant located in Jharkhand, India. It discusses that the power plant has a total installed capacity of 420MW from its two 210MW coal-fired units. It also summarizes the key components of the plant including the coal handling plant, boiler, steam turbine, generator, water treatment systems and switchyard.
TENUGHAT THERMAL POWER STATION, T.T.P.S. LALPANIA
The document provides details about the Tenughat Thermal Power Station located in Lalpania, Jharkhand. It has an installed capacity of 420 MW from two 210 MW units that use coal from nearby mines. The power station uses a Rankine cycle with a steam turbine connected to a generator. It has a coal handling plant, boiler, economizer, water treatment plant, and ash handling plant as its main components. The boiler uses tubes to transfer heat from hot gases to water to produce steam. The steam then powers the turbine which spins the generator to produce electricity.
Ppt on tenughat thermal power plant
Tenughat Thermal Power Station (TTPS) is a 420MW power plant located in Jharkhand, India. It requires approximately 7000 metric tons of coal per day supplied by nearby mines. The plant uses a coal handling system to transport coal to two 210MW boiler and turbine units that generate power. Steam produced in the boilers drives turbines connected to generators to produce electricity, which is stepped up and transmitted through a switchyard. The control room monitors and regulates operation of the plant's major components and systems.
project -2
The document provides details about Vivek Kushwaha's summer training project at the Feroze Gandhi Unchahar Thermal Power Project owned by NTPC Limited. It discusses NTPC's history and operations, and describes the key components and processes of the thermal power plant, including the coal handling process, steam generation in boilers, superheating of steam, and power generation using steam turbines. The summary focuses on the essential information about the training project location and the basic working of a thermal power plant.
Kota Super Thermal Power Plant
A thermal power station is a power station in which heat energy is converted to electric power. In most of the places in the world the turbine is steam-driven. Water is heated, turns into steam and spins a steam turbine which drives an electrical generator.
A Presentation on Kota Super Thermal Power Station
The document provides information about the Kota Super Thermal Power Plant in India including its establishment, generation capacity, units and their installation details. It describes the main components of the plant including the coal handling plant, boiler, superheater, steam turbine, generator, water treatment plant, ash handling plant and control room. The coal handling plant section explains the wagon unloading, crushing and conveying systems. The document also provides diagrams to illustrate the layout and processes of the power plant.
Ntpc training ppt
The document provides details about a presentation on summer training at NTPC Tanda power plant. It discusses that NTPC is the largest power company in India. It then summarizes information about NTPC Tanda power plant including its capacity, sources, main departments like coal handling plant, boiler, turbine, and generator. It also mentions advantages like low cost of fuel and disadvantages like atmospheric pollution of thermal power plants.
kota super thermal power plant (kstps)
The document is a presentation on a practical training and industrial visit to the Kota Super Thermal Power Station in India. It summarizes the key details of the power station in 3 points:
1) The power station has a total installed capacity of 1240 MW and uses coal as its fuel source, sourced from nearby mines. It employs a steam turbine generator system to convert the heat from combustion into electrical power.
2) The power station's operations include a coal handling plant to receive and transport coal via rail, a boiler to produce high pressure steam from coal combustion, a steam turbine to convert steam power into rotational energy, and generators to convert this into electrical power.
3) Ash handling is also
Recommended
TTPS
The document provides information about implant training at Tenughat Thermal Power Plant located in Jharkhand, India. It discusses that the power plant has a total installed capacity of 420MW from its two 210MW coal-fired units. It also summarizes the key components of the plant including the coal handling plant, boiler, steam turbine, generator, water treatment systems and switchyard.
TENUGHAT THERMAL POWER STATION, T.T.P.S. LALPANIA
The document provides details about the Tenughat Thermal Power Station located in Lalpania, Jharkhand. It has an installed capacity of 420 MW from two 210 MW units that use coal from nearby mines. The power station uses a Rankine cycle with a steam turbine connected to a generator. It has a coal handling plant, boiler, economizer, water treatment plant, and ash handling plant as its main components. The boiler uses tubes to transfer heat from hot gases to water to produce steam. The steam then powers the turbine which spins the generator to produce electricity.
Ppt on tenughat thermal power plant
Tenughat Thermal Power Station (TTPS) is a 420MW power plant located in Jharkhand, India. It requires approximately 7000 metric tons of coal per day supplied by nearby mines. The plant uses a coal handling system to transport coal to two 210MW boiler and turbine units that generate power. Steam produced in the boilers drives turbines connected to generators to produce electricity, which is stepped up and transmitted through a switchyard. The control room monitors and regulates operation of the plant's major components and systems.
project -2
The document provides details about Vivek Kushwaha's summer training project at the Feroze Gandhi Unchahar Thermal Power Project owned by NTPC Limited. It discusses NTPC's history and operations, and describes the key components and processes of the thermal power plant, including the coal handling process, steam generation in boilers, superheating of steam, and power generation using steam turbines. The summary focuses on the essential information about the training project location and the basic working of a thermal power plant.
Kota Super Thermal Power Plant
A thermal power station is a power station in which heat energy is converted to electric power. In most of the places in the world the turbine is steam-driven. Water is heated, turns into steam and spins a steam turbine which drives an electrical generator.
A Presentation on Kota Super Thermal Power Station
The document provides information about the Kota Super Thermal Power Plant in India including its establishment, generation capacity, units and their installation details. It describes the main components of the plant including the coal handling plant, boiler, superheater, steam turbine, generator, water treatment plant, ash handling plant and control room. The coal handling plant section explains the wagon unloading, crushing and conveying systems. The document also provides diagrams to illustrate the layout and processes of the power plant.
Ntpc training ppt
The document provides details about a presentation on summer training at NTPC Tanda power plant. It discusses that NTPC is the largest power company in India. It then summarizes information about NTPC Tanda power plant including its capacity, sources, main departments like coal handling plant, boiler, turbine, and generator. It also mentions advantages like low cost of fuel and disadvantages like atmospheric pollution of thermal power plants.
kota super thermal power plant (kstps)
The document is a presentation on a practical training and industrial visit to the Kota Super Thermal Power Station in India. It summarizes the key details of the power station in 3 points:
1) The power station has a total installed capacity of 1240 MW and uses coal as its fuel source, sourced from nearby mines. It employs a steam turbine generator system to convert the heat from combustion into electrical power.
2) The power station's operations include a coal handling plant to receive and transport coal via rail, a boiler to produce high pressure steam from coal combustion, a steam turbine to convert steam power into rotational energy, and generators to convert this into electrical power.
3) Ash handling is also
Dev
This document summarizes a seminar presented on practical training at the Kota Super Thermal Power Station. It describes the key parts of the power station including the coal handling plant, boiler, turbine, generator, water treatment plant, and switchyard. It provides details on processes like coal crushing and water treatment. The power station has a total generation capacity of 1240 MW across 6 units and uses coal from local mines to power its operations.
Ntpc training ppt
NTPC Kahalgaon is a 2340 MW coal-based thermal power plant located in Bihar, India. It uses water tube boilers fueled by coal from local mines to produce superheated steam that drives turbines to generate electricity. Ash produced from burning coal is disposed of in ash dykes, which are engineered embankments that contain the ash slurry. The plant also has a coal handling plant to receive, crush, and transport coal, as well as a water treatment system and cooling towers to manage water usage. The industrial training report provides an overview of the key components and processes at the NTPC Kahalgaon power plant.
Presentation on Kota super thermal power station (KSTPS)
This is a presentation based on my experience of 2 months summer training at KSTPS.It broadly covers all the major aspects of KSTPS.As i am an electrical engineer so i have made it more relatable to electrical engineering students.
ppt by amit 5 from iet lko
This document provides information about vocational training at NTPC Unchahar, a coal-based thermal power plant in India. It discusses:
- NTPC is the largest power company in India, with over 47 GW of installed capacity across various power stations.
- NTPC Unchahar has a generation capacity of 1,050 MW across 5 units and is constructing a 6th unit of 500 MW.
- The presentation outlines the different phases of training on components of the switchyard, main plant including the generator, boiler, turbine, and coal handling plant.
- It provides details on the operation of key equipment like the circuit breaker, lightning arrestor, and transformer in the switch
kota super thermal poer plant
The Kota Super Thermal Power Plant in Rajasthan has a total generation capacity of 1240 MW distributed across 7 stages commissioned between 1983-2009. It is located on the Chambal river and has abundant cooling water and good transportation access. The plant has a coal handling plant to receive and crush coal, boilers to generate steam, superheaters to further heat steam, turbines to convert steam energy to mechanical energy, generators to produce electricity, and auxiliary systems to treat water, handle ash, and control operations.
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
This document provides an overview of a summer training presentation on the National Thermal Power Plant in Kahalgaon, Bihar, India. It was submitted by an engineering student to their professor. The presentation covers the plant's coal handling system, boiler and auxiliary systems, turbine system, ash handling system, and off-site maintenance departments. It includes descriptions of the equipment used in coal handling, the boiler maintenance department, turbine maintenance, and ash handling. It also provides background on NTPC, the company that operates the plant, and details on the plant's layout and specifications.
Kota Thermal Training report by Abhishk mathur
A presentation in electrical engineering department for training in kota thermal power plant.
Give responses here
abhi92102@gmail.com
ntpc dadri
The document provides information about NTPC Dadri, a power plant located in India operated by NTPC. It has a total installed capacity of 2655 MW from coal, gas, and solar sources. The coal-based plant has a capacity of 1820 MW, the gas-based plant 830 MW, and the solar-based plant 5 MW. The document then describes the basic process of how coal is converted to electricity at a thermal power plant. It explains the key equipment used including the coal handling plant, boiler, turbine, condenser, and cooling towers. It provides specific details about NTPC Dadri's coal source and requirements. In summary, the document outlines the different energy sources and installed capacity at NTPC Dad
Summer Training Presentation Kota Super Thermal Power Station
FellowBuddy.com is an innovative platform that brings students together to share notes, exam papers, study guides, project reports and presentation for upcoming exams.
We connect Students who have an understanding of course material with Students who need help.
Benefits:-
# Students can catch up on notes they missed because of an absence.
# Underachievers can find peer developed notes that break down lecture and study material in a way that they can understand
# Students can earn better grades, save time and study effectively
Our Vision & Mission – Simplifying Students Life
Our Belief – “The great breakthrough in your life comes when you realize it, that you can learn anything you need to learn; to accomplish any goal that you have set for yourself. This means there are no limits on what you can be, have or do.”
Like Us - https://www.facebook.com/FellowBuddycom
Kota super thermal power plant seminar
The document summarizes the layout and components of the Kota Super Thermal Power Station, a power plant located in Kota, India. It consists of 7 units with a total generation capacity of 1240 MW. The main parts of the plant include the coal handling plant, boiler, superheater, steam turbine, generator, generating transformer, and cooling system. The coal handling plant processes and conveys coal to the furnace. Steam is generated in the boiler and superheated before powering the steam turbine, which drives the generator to produce electricity.
K.s.t.p.s. ppt
The Kota Super Thermal Power Station is a 1240MW coal-based power plant located on the left bank of the Chambal River in Kota, Rajasthan. It was proposed in 1973 and has been developed in five stages with a total of seven units of varying capacities from 110MW to 210MW. The power plant uses electrostatic precipitators and chimneys to control emissions and utilizes fly ash and bottom ash as byproducts. It generates electricity through steam turbines powered by coal-fired boilers.
Ntpc unchahar summer or vocational training ppt
NTPC Unchahar power plant has a total installed capacity of 1050MW from its coal-based thermal units. It sources coal from nearby mines and water from the Sharda Sahayak canal. The presentation summarized the key processes and components of a thermal power plant including coal handling, boiler, turbine, generator, condenser, cooling tower, and ash handling. The main departments of the plant work together to convert the heat energy from coal combustion into electrical energy through these processes.
thermal power station
The document provides an overview of an in-plant training presentation on a coal-fired thermal power station in Kanti, Bihar, India. It discusses the history and ownership of the plant, the two-unit 110MW capacity, the coal-fired process from coal delivery to steam generation, turbine operation, and power generation. It also summarizes the generator, transmission system including the control room, and substation equipment. The synchronization process is explained in three steps regarding terminal voltage, running speed/frequency, and phase sequence matching the bus bar.
Presentation on Kota super Thermal Power Station
The document provides information about the Kota Super Thermal Power Station (KSTPS) in Kota, Rajasthan. It discusses the key stages and features of the power station, including that it began operations in 1983, has a total generation capacity of 1240 MW from 7 units, and sources coal from local mines to power its boilers. The power station uses a steam turbine generator process to convert the thermal energy of steam into electrical energy.
NTPC MECANICAL SUMMER REPORT
The document is a summer training project report submitted by Ankur Pal to NTPC Unchahar. It summarizes the key components and processes at the NTPC Unchahar thermal power plant, including:
- Coal handling and pulverization in mills
- Combustion in the boiler's furnace and steam generation
- Superheating of steam in the boiler and associated components like soot blowers
- Expansion of steam in the high, intermediate, and low pressure turbines
- Condensing steam in the condenser and feeding water back into the system
The report provides an overview of the plant's thermal cycle and main equipment.
NTPC DADRI THERMAL PLANT PPT
The document provides information about the NTPC Dadri power plant located in Uttar Pradesh, India. It has a coal-fired thermal power plant with a capacity of 1820 MW as well as a gas-fired plant of 817 MW and a 5 MW solar plant, totaling 2642 MW. The power plant uses a steam turbine generator process to convert the heat energy from coal combustion into electrical energy. It also discusses the various units involved in this process like the boiler, turbine, alternator, condenser, and cooling towers. The control and instrumentation department works to monitor and control parameters across the plant to ensure safe and efficient operations.
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
This document is a project report submitted by Harshit Kumar Gupta towards the completion of his vocational training at NTPC Sipat power plant. It includes declarations by the student and certificates from his project guide. It then provides acknowledgments and summaries of the key components of the power plant including the coal handling plant, boiler, turbine, generator, condenser, cooling tower, and ash handling plant.
NTPC Farakka
This document provides an overview of the NTPC Farakka thermal power plant located in India. It discusses the basic requirements for a thermal power plant including location near water and fuel sources. It then describes the various plants that make up NTPC Farakka, including the main plant, coal handling plant, and water treatment plant. The document outlines the installed capacity and commissioning dates for the six units at NTPC Farakka totaling 2100 MW. Diagrams and descriptions of the key components of the thermal power generation process are provided, including the boiler, turbines, condenser, ash collection and cooling systems.
Ntpc dadri ppt
The document reports on the generation of thermal power at NTPC Dadri power plant. It describes the key components of a thermal power plant including the boiler, turbine, condenser and other equipment. The working of the power plant is explained starting from the burning of coal to produce steam and ending with the generation of electricity via the steam turbine connected to an alternator.
Ppt on tenughat thermal power plant
Tenughat Thermal Power Station (TTPS) is a 420MW power plant located in Jharkhand, India. It requires approximately 7000 metric tons of coal per day supplied by nearby mines. The plant uses a coal handling system to transport coal to two 210MW boiler and turbine units, which generate power that is stepped up and transmitted via a switchyard. Key components include the coal crushing and conveying system, boilers that convert water to steam, steam turbines that drive generators to produce electricity, and an electrostatic precipitator for reducing emissions. During training, the author learned about plant operations and management.
KSTPS presentation.pptx
Kota Super Thermal Power Station is a coal-based power plant located in Kota, India. It has a total generation capacity of 1240MW from its units commissioned between 1983 and 2009. The power plant uses a coal handling plant to transport coal via conveyor belts to the boilers, which heat water to produce steam that drives turbines connected to generators. Key components include the boiler, superheater, economizer, air preheater, condenser, and ash handling system. Water is treated on site before being fed to the boilers. The control room monitors operations and measurements across the plant.
KSTPS PPT Astha.pptx
Kota Super Thermal Power Station (KSTPS) is located in Kota, India and has a total installed capacity of 1240 MW generated across 7 units. It uses bituminous coal to power steam turbines that drive electricity generators. The main components include the coal handling plant, boiler, steam turbine, generator, and ash handling plant. Coal is delivered by rail, crushed, and conveyed to the boiler which converts it to steam to spin the turbine and generate electricity.
More Related Content
What's hot
Dev
This document summarizes a seminar presented on practical training at the Kota Super Thermal Power Station. It describes the key parts of the power station including the coal handling plant, boiler, turbine, generator, water treatment plant, and switchyard. It provides details on processes like coal crushing and water treatment. The power station has a total generation capacity of 1240 MW across 6 units and uses coal from local mines to power its operations.
Ntpc training ppt
NTPC Kahalgaon is a 2340 MW coal-based thermal power plant located in Bihar, India. It uses water tube boilers fueled by coal from local mines to produce superheated steam that drives turbines to generate electricity. Ash produced from burning coal is disposed of in ash dykes, which are engineered embankments that contain the ash slurry. The plant also has a coal handling plant to receive, crush, and transport coal, as well as a water treatment system and cooling towers to manage water usage. The industrial training report provides an overview of the key components and processes at the NTPC Kahalgaon power plant.
Presentation on Kota super thermal power station (KSTPS)
This is a presentation based on my experience of 2 months summer training at KSTPS.It broadly covers all the major aspects of KSTPS.As i am an electrical engineer so i have made it more relatable to electrical engineering students.
ppt by amit 5 from iet lko
This document provides information about vocational training at NTPC Unchahar, a coal-based thermal power plant in India. It discusses:
- NTPC is the largest power company in India, with over 47 GW of installed capacity across various power stations.
- NTPC Unchahar has a generation capacity of 1,050 MW across 5 units and is constructing a 6th unit of 500 MW.
- The presentation outlines the different phases of training on components of the switchyard, main plant including the generator, boiler, turbine, and coal handling plant.
- It provides details on the operation of key equipment like the circuit breaker, lightning arrestor, and transformer in the switch
kota super thermal poer plant
The Kota Super Thermal Power Plant in Rajasthan has a total generation capacity of 1240 MW distributed across 7 stages commissioned between 1983-2009. It is located on the Chambal river and has abundant cooling water and good transportation access. The plant has a coal handling plant to receive and crush coal, boilers to generate steam, superheaters to further heat steam, turbines to convert steam energy to mechanical energy, generators to produce electricity, and auxiliary systems to treat water, handle ash, and control operations.
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
This document provides an overview of a summer training presentation on the National Thermal Power Plant in Kahalgaon, Bihar, India. It was submitted by an engineering student to their professor. The presentation covers the plant's coal handling system, boiler and auxiliary systems, turbine system, ash handling system, and off-site maintenance departments. It includes descriptions of the equipment used in coal handling, the boiler maintenance department, turbine maintenance, and ash handling. It also provides background on NTPC, the company that operates the plant, and details on the plant's layout and specifications.
Kota Thermal Training report by Abhishk mathur
A presentation in electrical engineering department for training in kota thermal power plant.
Give responses here
abhi92102@gmail.com
ntpc dadri
The document provides information about NTPC Dadri, a power plant located in India operated by NTPC. It has a total installed capacity of 2655 MW from coal, gas, and solar sources. The coal-based plant has a capacity of 1820 MW, the gas-based plant 830 MW, and the solar-based plant 5 MW. The document then describes the basic process of how coal is converted to electricity at a thermal power plant. It explains the key equipment used including the coal handling plant, boiler, turbine, condenser, and cooling towers. It provides specific details about NTPC Dadri's coal source and requirements. In summary, the document outlines the different energy sources and installed capacity at NTPC Dad
Summer Training Presentation Kota Super Thermal Power Station
FellowBuddy.com is an innovative platform that brings students together to share notes, exam papers, study guides, project reports and presentation for upcoming exams.
We connect Students who have an understanding of course material with Students who need help.
Benefits:-
# Students can catch up on notes they missed because of an absence.
# Underachievers can find peer developed notes that break down lecture and study material in a way that they can understand
# Students can earn better grades, save time and study effectively
Our Vision & Mission – Simplifying Students Life
Our Belief – “The great breakthrough in your life comes when you realize it, that you can learn anything you need to learn; to accomplish any goal that you have set for yourself. This means there are no limits on what you can be, have or do.”
Like Us - https://www.facebook.com/FellowBuddycom
Kota super thermal power plant seminar
The document summarizes the layout and components of the Kota Super Thermal Power Station, a power plant located in Kota, India. It consists of 7 units with a total generation capacity of 1240 MW. The main parts of the plant include the coal handling plant, boiler, superheater, steam turbine, generator, generating transformer, and cooling system. The coal handling plant processes and conveys coal to the furnace. Steam is generated in the boiler and superheated before powering the steam turbine, which drives the generator to produce electricity.
K.s.t.p.s. ppt
The Kota Super Thermal Power Station is a 1240MW coal-based power plant located on the left bank of the Chambal River in Kota, Rajasthan. It was proposed in 1973 and has been developed in five stages with a total of seven units of varying capacities from 110MW to 210MW. The power plant uses electrostatic precipitators and chimneys to control emissions and utilizes fly ash and bottom ash as byproducts. It generates electricity through steam turbines powered by coal-fired boilers.
Ntpc unchahar summer or vocational training ppt
NTPC Unchahar power plant has a total installed capacity of 1050MW from its coal-based thermal units. It sources coal from nearby mines and water from the Sharda Sahayak canal. The presentation summarized the key processes and components of a thermal power plant including coal handling, boiler, turbine, generator, condenser, cooling tower, and ash handling. The main departments of the plant work together to convert the heat energy from coal combustion into electrical energy through these processes.
thermal power station
The document provides an overview of an in-plant training presentation on a coal-fired thermal power station in Kanti, Bihar, India. It discusses the history and ownership of the plant, the two-unit 110MW capacity, the coal-fired process from coal delivery to steam generation, turbine operation, and power generation. It also summarizes the generator, transmission system including the control room, and substation equipment. The synchronization process is explained in three steps regarding terminal voltage, running speed/frequency, and phase sequence matching the bus bar.
Presentation on Kota super Thermal Power Station
The document provides information about the Kota Super Thermal Power Station (KSTPS) in Kota, Rajasthan. It discusses the key stages and features of the power station, including that it began operations in 1983, has a total generation capacity of 1240 MW from 7 units, and sources coal from local mines to power its boilers. The power station uses a steam turbine generator process to convert the thermal energy of steam into electrical energy.
NTPC MECANICAL SUMMER REPORT
The document is a summer training project report submitted by Ankur Pal to NTPC Unchahar. It summarizes the key components and processes at the NTPC Unchahar thermal power plant, including:
- Coal handling and pulverization in mills
- Combustion in the boiler's furnace and steam generation
- Superheating of steam in the boiler and associated components like soot blowers
- Expansion of steam in the high, intermediate, and low pressure turbines
- Condensing steam in the condenser and feeding water back into the system
The report provides an overview of the plant's thermal cycle and main equipment.
NTPC DADRI THERMAL PLANT PPT
The document provides information about the NTPC Dadri power plant located in Uttar Pradesh, India. It has a coal-fired thermal power plant with a capacity of 1820 MW as well as a gas-fired plant of 817 MW and a 5 MW solar plant, totaling 2642 MW. The power plant uses a steam turbine generator process to convert the heat energy from coal combustion into electrical energy. It also discusses the various units involved in this process like the boiler, turbine, alternator, condenser, and cooling towers. The control and instrumentation department works to monitor and control parameters across the plant to ensure safe and efficient operations.
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
This document is a project report submitted by Harshit Kumar Gupta towards the completion of his vocational training at NTPC Sipat power plant. It includes declarations by the student and certificates from his project guide. It then provides acknowledgments and summaries of the key components of the power plant including the coal handling plant, boiler, turbine, generator, condenser, cooling tower, and ash handling plant.
NTPC Farakka
This document provides an overview of the NTPC Farakka thermal power plant located in India. It discusses the basic requirements for a thermal power plant including location near water and fuel sources. It then describes the various plants that make up NTPC Farakka, including the main plant, coal handling plant, and water treatment plant. The document outlines the installed capacity and commissioning dates for the six units at NTPC Farakka totaling 2100 MW. Diagrams and descriptions of the key components of the thermal power generation process are provided, including the boiler, turbines, condenser, ash collection and cooling systems.
Ntpc dadri ppt
The document reports on the generation of thermal power at NTPC Dadri power plant. It describes the key components of a thermal power plant including the boiler, turbine, condenser and other equipment. The working of the power plant is explained starting from the burning of coal to produce steam and ending with the generation of electricity via the steam turbine connected to an alternator.
What's hot (19)
Presentation on Kota super thermal power station (KSTPS)
Presentation on Kota super thermal power station (KSTPS)
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
ppt on NTPC kahalgaon ,bhagalpur ( bihar) BY AKHILESH & PRIYESH
Summer Training Presentation Kota Super Thermal Power Station
Summer Training Presentation Kota Super Thermal Power Station
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
Ntpc (national thermal power corporation) sipat mechanical vocational trainin...
Similar to GANESH KUMAR RAM PPT ON TTPS LALPANIA
Ppt on tenughat thermal power plant
Tenughat Thermal Power Station (TTPS) is a 420MW power plant located in Jharkhand, India. It requires approximately 7000 metric tons of coal per day supplied by nearby mines. The plant uses a coal handling system to transport coal to two 210MW boiler and turbine units, which generate power that is stepped up and transmitted via a switchyard. Key components include the coal crushing and conveying system, boilers that convert water to steam, steam turbines that drive generators to produce electricity, and an electrostatic precipitator for reducing emissions. During training, the author learned about plant operations and management.
KSTPS presentation.pptx
Kota Super Thermal Power Station is a coal-based power plant located in Kota, India. It has a total generation capacity of 1240MW from its units commissioned between 1983 and 2009. The power plant uses a coal handling plant to transport coal via conveyor belts to the boilers, which heat water to produce steam that drives turbines connected to generators. Key components include the boiler, superheater, economizer, air preheater, condenser, and ash handling system. Water is treated on site before being fed to the boilers. The control room monitors operations and measurements across the plant.
KSTPS PPT Astha.pptx
Kota Super Thermal Power Station (KSTPS) is located in Kota, India and has a total installed capacity of 1240 MW generated across 7 units. It uses bituminous coal to power steam turbines that drive electricity generators. The main components include the coal handling plant, boiler, steam turbine, generator, and ash handling plant. Coal is delivered by rail, crushed, and conveyed to the boiler which converts it to steam to spin the turbine and generate electricity.
A best ppt on kota super thermal power station
Kota Super Thermal Power Station (KSTPS) is located in Kota, Rajasthan. It has a total generation capacity of 1240 MW across 7 stages of power production. Coal is used as fuel and is supplied by Coal India Limited. The presentation discusses the general layout and various key components of the power plant including the coal handling plant, boiler, ash handling plant, steam turbine, electricity generator, cooling system, transformer, and control panel. KSTPS uses a water tube boiler and produces electricity through a steam turbine connected to a generator.
Ntpc dadri
NTPC Dadri is a coal-based thermal power plant located in Uttar Pradesh, India. It has a total installed capacity of 2,642 MW from coal, gas, and solar sources. The coal-based plant consists of two stages with a total of 6 units, consuming 13,000 metric tons of coal per day from local mines. The plant uses a Rankine cycle to generate power, with coal being pulverized and used to produce high pressure steam in boilers that drives steam turbines connected to electric generators. Ash is disposed of using an efficient electrostatic precipitator and stored on-site. The plant also focuses on education, health, and fly ash utilization in the local community.
Kota super thermal power plant
The document summarizes the training seminar on the Kota Super Thermal Power Station. It describes the power station's establishment in 1973 with initial capacity of 220 MW expanding to 1240 MW currently. It details the main components of the plant including the coal handling plant, boiler, superheater, steam turbine, generator, cooling system, and ash handling plant. The layout and functioning of each component is briefly explained.
Study of corrosion and erosion in boilers
A boiler is a combination of systems and equipment in which chemical energy is converted into thermal energy, which is then transferred to working fluid, so as to convert it into steam at high temperature and pressure.
Corrosion is a relevant problem caused by water in boilers. Corrosion can be of widely varying origin and nature due to the action of dissolved oxygen, to corrosion currents set up as a result of heterogeneities on metal surfaces, or to the iron being directly attacked by the water.
While basic corrosion in boilers may be primarily due to reaction of the metal with oxygen, other factors such as stresses, acid conditions, and specific chemical corrodents may have an important influence and produce different forms of attack.
ppt on kota super thermal power plant
This document provides an overview of the Kota Super Thermal Power Station located on the Chambal river in Kota, India. It has a total installed capacity of 1240MW across 7 units of varying sizes commissioned between 1983-2009. The power station uses a coal-fired thermal process, with key components including the coal handling plant, boiler, superheater, steam turbine, economizer, generator, water treatment plant, and ash handling plant. It benefits from abundant cooling water from the river and good transportation access for coal and industry in the local region.
Ppt on btps bokaro industrial training
The document summarizes the Bokaro Thermal Power Station located in Jharkhand, India. It has three units that generate a total of 630 MW of power. The power station uses coal as its fuel source, which is handled through a coal handling plant and crushed before being fired in the boiler. The boiler then heats water to create high-pressure steam, which spins turbines connected to generators to produce electricity. The steam is reused in the process by passing through a superheater, economizer and condenser before being treated and reused. Ash is removed using an electrostatic precipitator and handled separately. A control room monitors and regulates the entire power generation process.
vocational training at DVC andal
This document provides an overview of the vocational training seminar on the Durgapur Steel Thermal Power Station in Andal, India. It discusses the key components and processes of a thermal power plant, including the Rankine cycle used to convert heat from coal into electrical power. The main parts of the plant are the coal handling plant, boiler, condenser, turbine, and desalination plant. The coal handling plant receives and prepares coal for use in the boilers, which convert water into high-pressure steam. The steam then drives the turbine, which turns a generator to produce electricity.
Kota thermal power plant ppt
The Kota Super Thermal Power Station is a 1240MW coal power plant located in Kota, Rajasthan. It uses a steam turbine generator system fueled by coal. Coal is transported via a conveyor system to the boiler, where it is burned to produce steam that drives the turbine generator. The steam is then condensed in condensers using cooling water from the Chambal River. Fly ash from combustion is captured and can be used for products like cement or road construction. The power station began operating in 1983 and has since expanded in stages to its current capacity.
adi ntpc.pptx
This document provides an overview of the Feroze Gandhi Unchahar Thermal Power Station located in Uttar Pradesh, India. It has an installed capacity of 1550 MW distributed across 6 units ranging from 210-500 MW each. The plant uses coal from local mines to power steam turbines that generate electricity. It also includes descriptions of the key components and processes involved in coal handling, steam generation, power production, emission control, and ash management at the thermal power station.
Kstps ppt
The Kota Super Thermal Power Station is a coal-based steam plant located on the left bank of the Chambal River in Kota, Rajasthan. It has a total generation capacity of 1240MW from 7 units and requires 250 hectares of land. The first unit was commissioned in 1983. Coal is transported by rail from nearby mines and handles about 3074 tonnes per day. The plant has a coal handling system, boilers, turbines, generators, cooling system, water treatment plant, and ash handling facilities. It supplies power to various cities in Rajasthan.
Shoaib khan ntpc
The document provides information about a presentation on summer training at NTPC Tanda power plant. It discusses that NTPC is the largest power company in India. It then summarizes details about NTPC Tanda such as its location, capacity, sources of coal and water. It also describes the main departments of the plant including the coal handling plant, boiler, turbine, generator, condenser and cooling tower. Finally, it discusses the advantages and disadvantages of thermal power plants.
Thermal Power Simulator Training
The document provides information about a thermal power simulator training that took place at Essar Power Gujarat Ltd in Jamnagar, India. It acknowledges the organizers and mentors of the training. It then provides details about the Salaya power plant including its location, phases, capacity and key components. It describes the specifics of the 2x600 MW simulator used for training including its advantages. The document outlines the daily plan for the training and provides an overview of the key systems and circuits within the thermal power plant such as the boiler, turbine, generators, transformers and main circuits.
Avdhehs kumar presention kstps kota
Kota Super Thermal Power Station (KSTPS) is a coal-based power plant located in Rajasthan, India. It has a total installed capacity of 1240 MW generated across 7 units. The plant receives coal via train from nearby mines and uses water from the Chambal River. It employs a Rankine cycle with a coal handling plant, ash handling plant, electrostatic precipitators, turbo generators to produce power, and a cooling system using hydrogen. Transformers are used to step up the voltage from the generators to connect to the grid.
kota thermal power plant
This document provides an overview of the Kota Thermal Power Station (KSTPS) in India. It discusses the power generation units and auxiliaries used at KSTPS. The station uses coal from nearby mines as fuel and water from the Chambal River for cooling. It has a total installed capacity of 1240MW across 7 units of varying sizes installed in stages. The document describes the key components and processes of the coal handling plant and ash handling plant that supply fuel and remove waste from the power generation process.
thermal power plant at NTPC
NTPC Dadri is a coal and gas-based thermal power plant located in Uttar Pradesh, India. It has a total installed capacity of 2,637 MW from 6 coal units and 6 gas units. The plant sources coal from Jharkhand and water from the Upper Ganga Canal. It operates by pulverizing coal, heating water into steam in a boiler, using the steam to spin turbines connected to a generator to produce electricity, and condensing the steam in a condenser to be reused. The plant helps contribute to over 3/5th of India's total power generation. Ash produced is utilized in construction, cement/brick manufacturing, and agriculture.
Richappt
NTPC Dadri is a coal and gas-based thermal power plant located in Uttar Pradesh, India. It has a total installed capacity of 2,637 MW consisting of 1,820 MW from its coal-based units and 817 MW from its gas-based units. The plant sources coal from Piparwara mines in Jharkhand and water from the Upper Ganga Canal. It operates using a conventional thermal power generation process where coal is pulverized and fired in a boiler to produce high pressure steam that drives turbines connected to generators to produce electricity. Ash produced from combustion is utilized in construction and manufacturing industries.
Vivek ppt
This document provides an overview of the Suratgarh Super Thermal Power Plant located in Kota, India. It discusses the plant's layout and key components including 5 power generation units with a total capacity of 1500MW, a coal handling plant, water treatment facilities, boilers, turbines, generators, transformers, switchyards, ash handling, electrostatic precipitators, cooling towers and the control room. The presentation concludes with the student expressing their gratitude for the opportunity to tour the large-scale facility and gain practical engineering insights.
Similar to GANESH KUMAR RAM PPT ON TTPS LALPANIA (20)
Recently uploaded
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Recently uploaded (20)
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
GANESH KUMAR RAM PPT ON TTPS LALPANIA
- 1. Industrial Training Report In TENUGHAT VIDYUT NIGAM LIMITED Submitted in partial fulfillment of the requirement for the award of the B.Tech In Mechanical Engineering Submitted by:- Name:-GANESH KUMAR RAM University Roll No:-1404535 Trade / Sem:-MECHANICAL/5th
- 3. Tenughat Vidyut Nigam Limited is a power generating company incorporated on 26.11.1989 of Jharkhand . The project site known as Tenughat Thermal Power Station (TTPS) is located at village.Lalpania in Dist‐Bokaro. The project is situated on the bank of Tenughat reservior. . . The total installed capacity of Tenughat Thermal Power Station is 420MW having two units of 210 MW capacity each. The daily requirement of coal for full load generation from its 2x210 MW units is a approximately 7000 MTs which is met from coal mines of CCL situated in the vicinity of plant within 50 Kms.. TTPS has an acquired land of approx. 1800 acer
- 4. • Principle • Layout • Coal handling plant • Boiler • Super heater • Steam Turbine • Economizer • Generator • Water Treatment Plant • Ash handling plant • Control Room
- 5. BOILER TURBINE DM PLANT CONTROL ROOM SWITCH YARD ESP GENERATOR SECTION COAL HANDLING PLANT
- 7. 1 -2 :-isenotrophic expansion(steam turbine) 2-3:-isobaric heat expension(condenser) 3-4:-isenotrophic expension(pump) 4-1:- isobaric heat supply(steam generator or boiler)
- 8. COAL:- Plant needs 700 mt coal per day for the running of 2x210 mw plant It is supply by coal block ccl which is 50 kms away from the plant WATER:- Plant get water from tenughat dam
- 9. Coal Handling Plant • Wagon unloading system • Crushing system • Conveying system Coal handling plant section
- 10. Unload the coal from wagon to hopper with the help of wagon Tripler. Hopper allows to pass coal pieces ≤ 200mm From hopper coal fall on vibrator which is supported by roller.
- 11. Belt are used to convey coal from coal handling plant to furnace. Specification:- ◦ Belt width : 1400mm ◦ Speed : 2.2m/sec ◦ Total install power : 360kw ◦ Capacity : 1350/750 ton/hr ◦ No. of conveyor: 38
- 12. CRUSHER HOUSE:- It consists of crushers which are used to crush the coal to 20 mm size. Two types Primary crusher oRail crusher oRotary breaker Secondary crusher
- 13. RAW COAL FROM CCL To TTPS via a single railway track & trucks Wagon tippler hoppersCrusher housebunkers Row coal feeders Coal mills (pulverization) Boiler furnace ( tangential firing of pulverized coal)
- 14. CWPH 1-5 CONDENSO R 6-7 COOLING TOWER 6- 7 CWPH 6-7 DM PLANTWTP CONDENSO R 1-5 CLOSED LOOP SYSTEM SOFT WATER DM WATER CLARIFIED WATER RAW WATER FILTER WATER OPEN LOOP SYSTEM WATER CYCLE CHAMBAL UPSTREA M RIVER HOT WATER
- 15. It is a closed vessel in which water under pressure is converted into steam. Hot water or steam used to transfer heat to a process. A boiler is always designed to absorb maximum amount of heat released in process of combustion. Furnace:- It is primary part of boiler where the fuel is burnt to liberate the heat energy.Chemical Energy of fuel Thermal Energy by combustio n
- 18. •FUNCTION- Turbine is a machine in which shaft is rotated b the impact of the working fluid such as steam,water etc. •Type – Reaction •TECHNICAL SPECIFICATION- Rated output -- 110 MW Rated speed – 3000 rpm Direction of rotation – clockwise Type -3 cylinder, impulse reaction Heat flow at rated output – 2152.5 kcal/kwh Quantity of oil - 1800 liters
- 20. It converts mechanical power into electrical power. PRINCIPLE- Electromechanical energy conversion TECHNICAL SPECIFICATION- Apparent output – 137.5 MVA Active output - 110 MW Power factor – 0.85 lag Excitation voltage - 230 Volt Rated voltage – 11 KV Rated speed – 3000 rpm Phase connection – star-star
- 21. 21 Used for the removal of suspended particles and fly ash from industrial flue gases PRINCIPLE- Produces an electrostatic field which attracts the ionized carbon particles and other such particulates which cause environmental pollution.
- 23. Main Equipment Of Switchyard Bus Bar Bus Coupler Isolating switch Earthing Switch Lightning Arrester Current & Potential Transformer (CT&PT) Circuit Breaker Capacitive Voltage Transformer (CVT)
- 24. Place where switching operations of power distribution is perfomed. Outgoing Feeder patratu feeder -1 Bihar sarif feeder- 2
- 25. Control Room