This document discusses various approaches to quality improvement in healthcare, including definitions of quality from different perspectives. It provides definitions of quality from the perspectives of customers, products/services, and comparisons of product-based versus user-based definitions. Key approaches to quality improvement discussed include total quality management, Six Sigma, Lean, and the 5S methodology.
The impact of nursing leadership on patient safety outcomes: a systematic reviewanne spencer
Lisa Abraham is undertaking her MSc in Nursing in Advance Leadership, her presentation was given at the Nursing Showcase in St Mary's Campus in March 2016.
The impact of nursing leadership on patient safety outcomes: a systematic reviewanne spencer
Lisa Abraham is undertaking her MSc in Nursing in Advance Leadership, her presentation was given at the Nursing Showcase in St Mary's Campus in March 2016.
The challenges of leading healthcare organizations and what makes an excellent healthcare leader given the various stake holders and divergent interests
Fully meeting the needs of those who need the service most, at the lowest cost to the organization, within limits and directives set by higher authority
Strategic Management of Healthcare OrganizationsMBA ASAP
Health Care costs have been growing at an unsustainable rate. Reaching an estimated 17.3 percent of gross domestic product (GDP) in 2009, according to the Centers for Medicare and Medicaid Services (CMS), representing the largest one-year increase in history when the nation itself was in the midst of the “great recession.” Predictions are for health care costs to be 19.3 percent of GDP in 2019 (four times the 5.1 percent of GDP in 1960). Despite the high cost of health care, gaps and inequities persisted, leading to health care reform. The 2010 Patient Protection and Affordable Care Act (PPACA), or commonly Affordable Care Act (ACA) is attempting to change the US health care system from a volume-based to a value-based model.
The challenges of leading healthcare organizations and what makes an excellent healthcare leader given the various stake holders and divergent interests
Fully meeting the needs of those who need the service most, at the lowest cost to the organization, within limits and directives set by higher authority
Strategic Management of Healthcare OrganizationsMBA ASAP
Health Care costs have been growing at an unsustainable rate. Reaching an estimated 17.3 percent of gross domestic product (GDP) in 2009, according to the Centers for Medicare and Medicaid Services (CMS), representing the largest one-year increase in history when the nation itself was in the midst of the “great recession.” Predictions are for health care costs to be 19.3 percent of GDP in 2019 (four times the 5.1 percent of GDP in 1960). Despite the high cost of health care, gaps and inequities persisted, leading to health care reform. The 2010 Patient Protection and Affordable Care Act (PPACA), or commonly Affordable Care Act (ACA) is attempting to change the US health care system from a volume-based to a value-based model.
Nursing leadership and management course / Total Quality MnagementMouad Hourani
What is Quality?
Definition of Quality in healthcare?
Quality Evolution .
Quality control.
Quality Assurance.
Total Quality Management.
Old vs. TQM Approach.
The Deming, Juran and Crosby philosophies.
Quality Principles.
Why Quality?
Quality perspectives.
Key Dimensions of Quality.
Good Managers (Leaders)
Total Quality Management in HealthcareGunjan Patel
Now days, Healthcare systems are of fundamental interests to all level of Hospitals in our societies. Eventually, increasing importance and reliance are placed on total quality management in healthcare systems. Due to this rising importance that is also reflected in the increasing percentage of national and international resources for both private and public sector to allocated in hospital management systems. Hospitals and other healthcare organization across the globe have been progressively implementing TQM to reduce costs, improve efficiency and provide high quality patient care.
CHAPTER 1 SEMESTER V PREVENTIVE-PEDIATRICS.pdfSachin Sharma
This content provides an overview of preventive pediatrics. It defines preventive pediatrics as preventing disease and promoting children's physical, mental, and social well-being to achieve positive health. It discusses antenatal, postnatal, and social preventive pediatrics. It also covers various child health programs like immunization, breastfeeding, ICDS, and the roles of organizations like WHO, UNICEF, and nurses in preventive pediatrics.
Navigating Challenges: Mental Health, Legislation, and the Prison System in B...Guillermo Rivera
This conference will delve into the intricate intersections between mental health, legal frameworks, and the prison system in Bolivia. It aims to provide a comprehensive overview of the current challenges faced by mental health professionals working within the legislative and correctional landscapes. Topics of discussion will include the prevalence and impact of mental health issues among the incarcerated population, the effectiveness of existing mental health policies and legislation, and potential reforms to enhance the mental health support system within prisons.
India Clinical Trials Market: Industry Size and Growth Trends [2030] Analyzed...Kumar Satyam
According to TechSci Research report, "India Clinical Trials Market- By Region, Competition, Forecast & Opportunities, 2030F," the India Clinical Trials Market was valued at USD 2.05 billion in 2024 and is projected to grow at a compound annual growth rate (CAGR) of 8.64% through 2030. The market is driven by a variety of factors, making India an attractive destination for pharmaceutical companies and researchers. India's vast and diverse patient population, cost-effective operational environment, and a large pool of skilled medical professionals contribute significantly to the market's growth. Additionally, increasing government support in streamlining regulations and the growing prevalence of lifestyle diseases further propel the clinical trials market.
Growing Prevalence of Lifestyle Diseases
The rising incidence of lifestyle diseases such as diabetes, cardiovascular diseases, and cancer is a major trend driving the clinical trials market in India. These conditions necessitate the development and testing of new treatment methods, creating a robust demand for clinical trials. The increasing burden of these diseases highlights the need for innovative therapies and underscores the importance of India as a key player in global clinical research.
Empowering ACOs: Leveraging Quality Management Tools for MIPS and BeyondHealth Catalyst
Join us as we delve into the crucial realm of quality reporting for MSSP (Medicare Shared Savings Program) Accountable Care Organizations (ACOs).
In this session, we will explore how a robust quality management solution can empower your organization to meet regulatory requirements and improve processes for MIPS reporting and internal quality programs. Learn how our MeasureAble application enables compliance and fosters continuous improvement.
How many patients does case series should have In comparison to case reports.pdfpubrica101
Pubrica’s team of researchers and writers create scientific and medical research articles, which may be important resources for authors and practitioners. Pubrica medical writers assist you in creating and revising the introduction by alerting the reader to gaps in the chosen study subject. Our professionals understand the order in which the hypothesis topic is followed by the broad subject, the issue, and the backdrop.
https://pubrica.com/academy/case-study-or-series/how-many-patients-does-case-series-should-have-in-comparison-to-case-reports/
Medical Technology Tackles New Health Care Demand - Research Report - March 2...pchutichetpong
M Capital Group (“MCG”) predicts that with, against, despite, and even without the global pandemic, the medical technology (MedTech) industry shows signs of continuous healthy growth, driven by smaller, faster, and cheaper devices, growing demand for home-based applications, technological innovation, strategic acquisitions, investments, and SPAC listings. MCG predicts that this should reflects itself in annual growth of over 6%, well beyond 2028.
According to Chris Mouchabhani, Managing Partner at M Capital Group, “Despite all economic scenarios that one may consider, beyond overall economic shocks, medical technology should remain one of the most promising and robust sectors over the short to medium term and well beyond 2028.”
There is a movement towards home-based care for the elderly, next generation scanning and MRI devices, wearable technology, artificial intelligence incorporation, and online connectivity. Experts also see a focus on predictive, preventive, personalized, participatory, and precision medicine, with rising levels of integration of home care and technological innovation.
The average cost of treatment has been rising across the board, creating additional financial burdens to governments, healthcare providers and insurance companies. According to MCG, cost-per-inpatient-stay in the United States alone rose on average annually by over 13% between 2014 to 2021, leading MedTech to focus research efforts on optimized medical equipment at lower price points, whilst emphasizing portability and ease of use. Namely, 46% of the 1,008 medical technology companies in the 2021 MedTech Innovator (“MTI”) database are focusing on prevention, wellness, detection, or diagnosis, signaling a clear push for preventive care to also tackle costs.
In addition, there has also been a lasting impact on consumer and medical demand for home care, supported by the pandemic. Lockdowns, closure of care facilities, and healthcare systems subjected to capacity pressure, accelerated demand away from traditional inpatient care. Now, outpatient care solutions are driving industry production, with nearly 70% of recent diagnostics start-up companies producing products in areas such as ambulatory clinics, at-home care, and self-administered diagnostics.
Deep Leg Vein Thrombosis (DVT): Meaning, Causes, Symptoms, Treatment, and Mor...The Lifesciences Magazine
Deep Leg Vein Thrombosis occurs when a blood clot forms in one or more of the deep veins in the legs. These clots can impede blood flow, leading to severe complications.
The dimensions of healthcare quality refer to various attributes or aspects that define the standard of healthcare services. These dimensions are used to evaluate, measure, and improve the quality of care provided to patients. A comprehensive understanding of these dimensions ensures that healthcare systems can address various aspects of patient care effectively and holistically. Dimensions of Healthcare Quality and Performance of care include the following; Appropriateness, Availability, Competence, Continuity, Effectiveness, Efficiency, Efficacy, Prevention, Respect and Care, Safety as well as Timeliness.
The Importance of Community Nursing Care.pdfAD Healthcare
NDIS and Community 24/7 Nursing Care is a specific type of support that may be provided under the NDIS for individuals with complex medical needs who require ongoing nursing care in a community setting, such as their home or a supported accommodation facility.
1. Prof. Dr Swe Win
Honorary Professor
Professor and Head(retired)
Health policy and management Department
UPH
19.3.2016 Hospital Administration Society
2. To know the various approaches of
quality improvement in health care
services and to select the
appropriate approach applied in
hospital.
3. A 2013 study on the global burden
of medical error found that unsafe
care causes 43 million injuries a
year and the loss of 23 million
disability adjusted life years
(DALYs), about two-thirds of them
in low- and middle income
countries (Jha et al., 2013).
The fifth leading cause of DALYs
lost worldwide (i.e underestimate)
Source: Improving Quality of Care in Low- and Middle-Income Countries:
Workshop Summary;NAP
4. provider/manufacturer/supplier
ongoing process of building and
sustaining relationships by
assessing, anticipating and
fulfilling stated and implied needs
Error-free
Reducing the variation around the
target
doing right things right
Customer/user/consumer/client
Customers’ perception of the value
of suppliers’ work output
value-added care and service that
meets and/or exceeds both the
needs legitimate expectations
properties of products and/services
that are valued by the customer
The degree to which something
meets or exceeds the expectations
of customers (Degree of excellence
or degree of goodness)
fulfillment of expectation
ability of a product or service to
meet a customer’s expectations for
that product or service
5. FEIGENBAUM (1983): Quality is total composite product (goods and
services) characteristics, through which the product in use will meet
the needs and expectations of the customers. Concept of quality
must start with identification of customer quality requirements and
must end only when the finished product is placed into the hands of
the customer who remains satisfied through various stages of
relationship with the seller
Institute of Medicine (1990) definition: “Quality is the extent to
which health services for individuals and populations increase the
likelihood of desired health outcomes and are consistent with
current professional knowledge.”
American Society of Quality Control (ASQC) and American National
Standard Institute (ANSI): totality of features and characteristics of
product (goods and services) that bears on its ability to satisfy given
needs
6. Product
Perfection
Consistency
Eliminating waste
Compliance with policies and procedures
Providing a good, usable product
Service delivery
Speed of delivery
Doing it right, do right thing
User
Delighting or pleasing customers
Total customer service and satisfaction
Degree of goodness
Quality = Degree of performance
The standard set
empowerment
standards
satisfaction
7. Product/production/provider based
Features
Augmented product
Conformance
Degree to which characteristics of
the product meet pre-established
standards
Performance
Product’s primary operating
characteristics
Serviceability
Speed, competence & courtesy of
providing services.
Value/ judgmental /user based
Aesthetics
Look, feel sound, taste, smell
Perceived Quality
Resulting from advertisement,
image, brand name, earlier use,
hearsay
Durability
Length of time a product can be
used before it deteriorates or
becomes non functional
Reliability
Ability of the product to function at
the specified level of performance
9. Mass Inspection
Inspecting
Salvaging
Sorting
Grading
Rectifying
Rejecting
Quality Control
Quality manuals
Product testing using SQC
Basic quality planning
Quality Assurance
Emphasis on prevention
Proactive approach using SPC
Advance quality planning
Total Quality Control
All aspects of quality of inputs
Testing equipments
Control on processes
10. Company wide Quality Control
Measured in all functions connected with
production such as
R&D
Design
Engineering
Purchasing,
Operations etc
Total Quality Management
Measured in all aspects of business,
Top management commitment
Continuous improvement
Involvement & participation of employees
12. Accreditation: Accreditation is a formal recognition that
an organization is competent to carry out specific
activities
Audits: The objective of audits is to enhance the
effectiveness and efficiency of programme
Audits should be conducted by:
People who are technically competent, but
Do not have any direct responsibility for those
activities
13. Quality Assurance
planned and systematic actions necessary to provide adequate
confidence that a product or service will satisfy given requirements for
quality.
Examples of QA:
type testing, performance testing, and quality audits required by a
regulatory body.
blind testing and quality audits of the service provider performed by
the user of the service.
14. The operational techniques and activities that are
used to fulfill requirements for quality.
Examples of QC:
routine (i.e. daily)
various statistical analyses used to verify continued
system performance.
Quality Control
15. Identifies gaps exist between services actually provided and expectation of
services
lessens these gaps not only to meet customer needs and expectation, but
to exceed them and attain unprecedented level of performance
QI focus on the Client, Systems and process, teamwork, and the use of data
16. Total Quality Management (TQM)
is a comprehensive and structured
approach to organizational
management that seeks to
improve the quality of products
and services through ongoing
refinements in response to
continuous feedback
17. 1.It involved in all stages of system
approach ie. input, process and
output stages
2.Participation of all stakeholders
3.Linkage with problem solving
approach and accountability
4.Key process is PDCA /
PDSA(Continuing Improvement)
5.Standardization
.(Accreditation/certification/Bench
mark)
18. A management approach for an
organization ,centered on quality,
based on the participation of all its
members and aiming at long-term
success through customer
satisfaction, and benefits to all
members of the organization and
to society. (ISO definition)
19. 2.The 5 key principles of TQM
initiative (a)management
commitment
(b)employee commitment
(c)fact based decision making
(d)continuous improvement
(e)customer focus
22. Six sigma
A philosophy and measurement process
developed in the 1980s at Motorola.
To design, measure, analyze, and control
the input side of a production process to
achieve the goal of no more than 3.4
defects per million parts or procedures.
A philosophy and measurement process
that attempts to design in quality as a
product is being made.
one percent of health
care providers in the
United States have
deployed Six Sigma
methods.
23. Methodological sequences:
DMAIC—define, measure, analyze,
improve, and control; or DMADV—
define, measure, analyze, design,
and verify. DMAIC is generally used
to improve existing systems that
have fallen below Six Sigma levels,
DMADV is used to design and
develop new processes or products
at Six Sigma levels
Six Sigma projects require to have
expertise in basic statistical tools
such as Pareto Diagrams,
descriptive and higher level
statistics including regression, and
statistical modeling techniques as
well as control processes
24. The essence of Six Sigma
methodologies is both
improvement of the knowledge
and capability of employees, and
also behavior changes through
training.
Thus, Six Sigma employs a
classification system that identifies
education and training for
employees, project managers and
executives
25. The term lean was coined as a
word to describe a system
(Toyota’s)that managed to get by
with half of everything and far
fewer than half of the defects and
safety incidents.
All we are doing is looking at
timeline from the moment a
customer gives us an order to the
point when we collect the cash.
and we reducing that timeline by
removing the non-value-added
wastes(Toyota’sTaiichi Ohno
26. Toyota Triangle
Lean is an integrated system of
human development, technical tools,
management approaches ,and
philosophy of that creates a lean
organizational culture.
27. 1.respect for people (eg, patients,
staff members, managers,
physicians),
2. continuous improvement (eg,
easier, better, faster, cheaper), and
3.human development.
28. Specify value – from the
standpoint of the end customer
(the patient)
• Identify the value stream – all
value-added steps across
departmental boundaries (the
value stream), eliminating steps
that do not create value
• Make value flow continuously –
eliminate causes of delay, such as
batches and quality problems
• Let customers pull value – avoid
pushing work onto the next
process or department; let work
and supplies be pulled as needed
• Pursue perfection – through
continuous process improvement
29. Sort
Clear out rarely used
Items by Red Tagging
Straighten
Organise and Label a
Place for Everything
Shine
Clean ItStandardise
Create Rules to Sustain
the first 3 5’S
Sustain
Use Regular Management
Audits to Stay Disciplined Eliminate
Waste
30.
31. Seiri – Sorting
Seiton – Straighten or Set in order
Seiso – Sweeping, shining or
cleaniness
Seikestu – Standardising
Shitsuke – Sustaining the discpline
32. Donabedian concepts
Efficacy (Power or capacity to
produce a desired effect)
Efficiency (value for
money)(lowest amount of inputs,
greatest amount of outputs)
Effectiveness
Optimality (balancing
improvements with costs)
Acceptability (to patients and
families)
Legitimacy (ethical issues-follow
through to treatment)
Equity (access, fairness,
appropriateness)
The U.S. Institute of Medicine
concepts
Patient safety to provider safety
to Environmental safety
Effectiveness (scientifically proven
appropriate care)
Patient centeredness (respect and
responsiveness)
Timeliness (minimal delays
barriers to getting access to care)
Efficiency (minimal waste of
equipment, supplies, ideas, and
energy)
Equity (care provided consistently
across genders ,ethnic groups,
locations and socioeconomic
classes)
34. three dimensions of Quality of
Care i.e. professional technical
aspect of care, interpersonal
aspects of quality and social
aspects of quality.
Professional Technical Aspects
Accuracy of diagnosis
Efficacy and efficiency of treatment
Excellence according to professional
standard
Necessity of care
Appropriateness
Continuity of care
Consistency (Uniformity, Reliability)
35. Inter-personal aspects
Patient Satisfaction
acceptability
Time spent with provider
Attitudes of provider and staff
Amenities
Social Aspects
Efficiency
Accessibility – including financing
36. Accreditation is an external quality
evaluation through which an
accrediting organization formally
recognizes that an institution
meets certain standards. “a
voluntary process by which a
government or nongovernment
agency grants recognition to health
care institutions which meet
certain standards that require
continuous improvement in
structures, processes, and
outcomes.” In English, the terms
accreditation,
certification, and licensure are
often mistakenly used as
synonyms
Benchmarking.
37. Accreditation means official
approval given by an organization
stating that somebody/something
has achieved in required standard
Certification means confirmation
that some fact or statement is true
through the use of documentary
evidence
38. Popular standards
ISO 9000 Quality management
ISO 14000 Environmental
management
ISO 3166 Country codes
ISO 26000 Social responsibility
ISO 50001 Energy management
ISO 31000 Risk management
ISO 22000 Food safety
management
ISO 27001 Information security
management
ISO 45001 Occupational health and
safety
39. A measurement of the quality of
an organization's policies,
products, programs, strategies,
etc., and their comparison with
standard measurements, or similar
measurements of its peers.
The objectives of benchmarking
are (1) to determine what and
where improvements are called
for, (2) to analyze how other
organizations achieve their high
performance levels, and (3)to use
this information to improve
performance.
40. Clinical in-service training is a
broad category of quality
improvement strategies, including
all training for health professionals
who have
already completed their formal
credentialing process.
In-service training is meant to
either reinforce important concepts
and practices or to introduce new
knowledge about how a health
professional should work.
41. designed for quality improvement
in family planning and is now also
used in maternal, child, and
reproductive health.
uses group problem solving and
self-assessment to identify
problems and set priorities for
quality improvement starts with an
orientation for managers at the
worksite, followed by a self-
assessment where participants
identify and rank their main
problems.
COPE® is meant to be
implemented with other tools for
continuous quality improvement,
such as supervision and training
42. use a continuous quality
improvement process
iterative problem solving,
encourages prompt process
improvements
Collaboratives usually last about 9–
24 months, during which time the
participating teams analyze a
problem and its causes; plan
changes
Collaboratives can be used to
improve processes for patients and
providers ,teams, organizations, or
systems.
43. SBM-R is a management method
developed by Jhpiego that aims to
improve quality of care by
improving health worker
performance.
It adapts the four main elements
of the continuous quality
improvement cycle (plan, do,
study, act) to standardize, do,
study, and reward
1.Assessment-standardsAction-
self assessment ,internal
assessment and External
assessments.
recognized for their efforts;
rewards, such as feedback, praise,
and social recognition,
44. Supportive supervision refers to a
process of working with staff to set
goals, identify and correct
problems, and monitor staff
performance.
It generally takes one of three
forms: managerial, clinical, or
educational.
45. TQM / SQI = Professionalism x Motivation x Leadership x Management x
Partnership
a. Practice professionalism by all categories of health
professionals
b. Fulfill basic and social needs to motivate professionals
c. Develop leadership quality
d. Better management and use management tools
Establish strong partnership both internal and external users
45
Prof.Dr Mya Oo
46. The governance
means the process of
decision making and
the process by which
decisions are
implemented
48. 1. Clinical Effectiveness
2. Research & Development
3. Openness
4. Risk Management
5. Education & Training
6. Clinical Audit
In 1990s, the UK introduced clinical (including doctors, nurses and therapists)
audit programs to assess the performance of clinical process and to educate the
health workforce concerned. This form of self regulation activities should be
welcome. We should avoid blame culture and develop our learning from those
experiences.
This form of clinical audit should be introduced and promoted in central
tertiary care hospitals.
49. Clinical audit is a process that has
been defined as "a quality
improvement process that seeks to
improve patient care and
outcomes through systematic
review of care against explicit
criteria and the implementation of
change“
The key component of clinical audit
is that performance is reviewed (or
audited) to ensure that what
should be done is being done, and
if not it provides a framework to
enable improvements to be made
Definition was announced
by the NHS executive:“
Clinical audit is the
systematic analysis of the
quality of healthcare,
including the procedures
used for diagnosis,
treatment and care, the
use of resources and the
resulting outcome and
quality of life for the
patient."
50. WHO HPH movement focuses on
four areas: promoting the health of
patients, promoting the health of
staff, changing the organization to
a health promoting setting, and
promoting the health of the
community in the catchment area
of the hospital. These four areas
are reflected in the definition of a
health promoting hospital:
51. A health promoting hospital does
not only provide high quality
comprehensive medical and
nursing services, but also develops
a corporate identity that embraces
the aims of health promotion,
develops a health promoting
organizational structure and
culture, including active,
participatory roles for patients and
all members of staff, develops itself
into a health promoting physical
environment, and actively
cooperates with its community”
53. Step1. Identify -Determine what
to improve
Step 2.Analyse -understand the
Problem
Step3.Develop -Hypothesize
about what changes will improve
problem
Step4. Test/Implement- Test the
hypothesized solution to see if it
yeilds improvement; based on the
results, decide whether to
abandon, modify, or implement
solution.
54. Individual
Problem solving
approach
Rapid Team
Problem solving
approach
When to use the
approach
When you know
the problem is
dependent on only
one person
When the team
needs quick
results and has a
lot of intuitive
ideas
Teams Unnecessary Ad hoc
Data Almost none Can succeed with
little data
Time Little Little
55. Systematic Team
problem solving
approach
Process
improvement
approach
When to use the
approach
When the problem
is complex or
recurring,
requiring analysis
When a key
process or system
requires ongoing
monitoring or
continuous
improvement
Teams Ad hoc Permanent
Data Need data to
understand the
causes of problem
Data from
continuous
monitoring, may
need to collect
more
Time Limited to the time
necessary
continuous
56.
57. 1. cost-effectiveness,
2.The method’s affordability
3.The feasibility of the method—
4.it is realistic to implement
5.the replicability of results in new
settings and
6.the scalability, or ease of
expansion,
7.Lastly, the sustainability of the
method, or the extent to which a
program can be integrated into
existing system,.
58. THANK YOU FOR YOUR ATTENTION
dr.swewin1969@gmail.com