Hotware dc ac_work-vehicle_electrical_power
•
0 likes•215 views
Hotware Energy DC-AC Inverters provide in-vehicle AC power to work and utility vehicles, heavy duty trucks, and emergency vehicles to operate tools, appliances, lights, and other electronic equipment. The inverters take stored battery power and silently convert it to AC power, eliminating the need for noisy generators. The inverters can be installed as an OEM option or aftermarket to power tools like drills, saws, and more from the vehicle's battery bank. When external AC power is available, the inverter charges the batteries back to full capacity and provides excess power to the vehicle. If no external power is available, the inverter draws from the battery banks to invert DC power to 120-230
Report
Share
Report
Share
Download to read offline
![Commercial Work Truck
Inverter Electricity
• Hotware Energy DC-AC Inverters provide in-vehicle AC power to
work & utility vehicles, heavy duty trucks and emergency vehicles
to operate tools, appliances, lights and other electronic equipment
wherever they are needed.
• Hotware DC-AC inverters take stored battery power and
[environmentally friendly ] silently convert it to AC power
eliminating the need of installing and maintaining noisy generators
as a mobile AC power source.
• The Diagram on the next page of Hotware DC-AC Auto-Transfer/
inverter/charger installed on a typical heavy duty truck or
utility/work truck takes stored battery power and converts it to AC
power to run appliances like Grinders, Drills, Electric chain saws,
heat guns and other work tools. Inverting power from a battery
bank is a quiet and environmentally friendly alternative to idling the
engine to supply power to the cab.](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Hotware marine electrical_power
The Hotware DC-AC mobile power solutions provide clean, quiet AC power for boats through microprocessor intelligent DC-AC inverters and auto-transfer/inverter/chargers. The inverter/chargers connect directly to battery banks and can supply AC power by inverting DC power from the batteries or recharge the batteries by converting incoming shore power to DC. When shore power is disconnected, the inverter switches on within 16ms to continue powering appliances from the batteries. An internal transfer switch senses when shore power returns and instantly switches from inverter to charger mode. The auto-transfer/inverter/chargers are available from 300-5000 watts and up to 20kW for custom applications.
Performance analysis of bi directional dc-dc converters for electric vehicles
Performance analysis of bi directional dc-dc converters for electric vehicles
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Novel single phase pwm ac–ac converters solving commutation problem using swi...
Novel single phase pwm ac–ac converters solving commutation problem using switching cell structure and coupled inductor
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Eletrical drives
This document discusses recent trends in electric drives, focusing on brushless DC motors. It introduces brushless DC motors, which have better operational efficiency than other electric drives. Brushless DC motors have advantages like high efficiency, reliability, and linear torque-speed relationship. They find applications in areas like transportation, home appliances, pumps, air compressors, model aircraft, locomotives, and trolleybuses. The document covers the principle, construction, variations, commutation, control implementation and power supplies of brushless DC motors.
UPS Presentation
The document discusses uninterruptible power supplies (UPS). It defines a UPS as a critical device that provides emergency backup power when the primary power source fails. A UPS contains components like an AC to DC converter, batteries, inverter, and battery charging unit to regulate voltage and provide continuous power. UPS systems are used to protect equipment from power disturbances that can cause data loss or equipment damage. The document outlines the components and functions of a basic UPS.
A nonisolated multiinput multioutput dc–dc boost converter for electric vehic...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A non isolated multi input multi output dc–dc boost converter for electric ve...
A non isolated multi input multi output dc–dc boost converter for electric vehicle applications
Do Your Projects With Technology Experts...
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Power backups
This presentation about the power backups to used in hotels for the big spaces, manufacturing factories, and warehouses. their capacity, process of installment.
Recommended
Hotware marine electrical_power
The Hotware DC-AC mobile power solutions provide clean, quiet AC power for boats through microprocessor intelligent DC-AC inverters and auto-transfer/inverter/chargers. The inverter/chargers connect directly to battery banks and can supply AC power by inverting DC power from the batteries or recharge the batteries by converting incoming shore power to DC. When shore power is disconnected, the inverter switches on within 16ms to continue powering appliances from the batteries. An internal transfer switch senses when shore power returns and instantly switches from inverter to charger mode. The auto-transfer/inverter/chargers are available from 300-5000 watts and up to 20kW for custom applications.
Performance analysis of bi directional dc-dc converters for electric vehicles
Performance analysis of bi directional dc-dc converters for electric vehicles
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Novel single phase pwm ac–ac converters solving commutation problem using swi...
Novel single phase pwm ac–ac converters solving commutation problem using switching cell structure and coupled inductor
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Eletrical drives
This document discusses recent trends in electric drives, focusing on brushless DC motors. It introduces brushless DC motors, which have better operational efficiency than other electric drives. Brushless DC motors have advantages like high efficiency, reliability, and linear torque-speed relationship. They find applications in areas like transportation, home appliances, pumps, air compressors, model aircraft, locomotives, and trolleybuses. The document covers the principle, construction, variations, commutation, control implementation and power supplies of brushless DC motors.
UPS Presentation
The document discusses uninterruptible power supplies (UPS). It defines a UPS as a critical device that provides emergency backup power when the primary power source fails. A UPS contains components like an AC to DC converter, batteries, inverter, and battery charging unit to regulate voltage and provide continuous power. UPS systems are used to protect equipment from power disturbances that can cause data loss or equipment damage. The document outlines the components and functions of a basic UPS.
A nonisolated multiinput multioutput dc–dc boost converter for electric vehic...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A non isolated multi input multi output dc–dc boost converter for electric ve...
A non isolated multi input multi output dc–dc boost converter for electric vehicle applications
Do Your Projects With Technology Experts...
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Power backups
This presentation about the power backups to used in hotels for the big spaces, manufacturing factories, and warehouses. their capacity, process of installment.
Ems project
The document compares the working of a brushless DC (BLDC) motor and an ordinary DC motor. Both motors work on the principle of Lorentz's law, which states that a current-carrying conductor in a magnetic field experiences a force. The BLDC motor has a stator, rotor, magnets, and Hall sensors instead of brushes. It has advantages like higher efficiency, power density, and lower noise. The ordinary DC motor uses brushes to conduct current and has advantages like lower cost and ability to be rebuilt.
Riello ups-powerbox-containerised-ups
Ecopowersupplies: PowerBox is a solution in fully equipped container that can be sent, installed and deployed in the space and provides continuous power supply.
Dynamic UPS
An UPS provides backup power when main power fails. A dynamic UPS differs from a static UPS in that it uses a flywheel instead of batteries to store energy. It provides near-instantaneous power during interruptions to start generators or safely shut down equipment. It has better transient response than static UPS and can handle heavy loads and fluctuations without interruption, making it suitable for critical applications like data centers, manufacturing processes, and electromagnetic lifting.
How does ups works
An uninterruptible power supply (UPS) provides backup power to devices when there is a disruption to the main power source. It consists of a rectifier that converts alternating current (AC) to direct current (DC), batteries that store the backup power, and an inverter that converts the stored DC power back to AC to power devices. UPS systems are available in various sizes, with small UPS providing power for a few minutes and large UPS able to power devices for several hours. The batteries determine how long the UPS can supply backup power. When the main power fails, the UPS seamlessly switches to the stored battery power to allow devices to shut down properly.
Electrical machines applications in robotics
The document discusses brushless DC motors and their use in robotics. It begins with an introduction to robots and the types of motors commonly used, including brushed DC motors, brushless DC motors, servo motors, and stepper motors. It then focuses on why brushless DC motors are preferable for robotics uses. The document goes on to explain the principle of operation, torque-speed characteristics, and applications of brushless DC motors, particularly their use in radio controlled planes. It concludes with some disadvantages of brushless DC motors.
Affordable & proviciency inverter(conference icaetm)
This document describes the design of an affordable and high-efficiency inverter. It uses an IC4049 oscillator circuit to produce a square wave output from a DC input voltage that is stepped up via a transformer to produce a high voltage AC output. A charging circuit is also included to charge the battery when mains power is restored. The circuit diagram and description are provided. Testing showed the designed inverter successfully converts the DC battery voltage to a high voltage AC output to power loads, with the goal of providing a low-cost solution to power electrical devices during power outages.
ELECTRICAL AC AND DC DRIVES
This document discusses electrical drives using AC and DC motors. It defines electrical drives as using around 50% of electrical energy for electric motors in industries and applications. The key components of electrical drives are the motor, power source, and control methods. For AC motor drives, the document discusses induction motors and synchronous motors. It also summarizes methods for controlling speed and torque of induction motors including stator voltage control, rotor voltage control, and frequency control. The document concludes that variable speed drives can improve energy efficiency compared to constant speed drives.
Speed Control of BLDC Motor with Four Quadrant Operation Using dsPIC
Brushless DC (BLDC) motor drives are becoming more popular in industrial and traction applications. Hence the control of BLDC motor in four quadrants is very vital. The flexibility of the drive system is increased using digital controller. In this paper the PWM signals for driving the power inverter bridge for BLDC motor have been successfully implemented using a dsPIC controller and the motor can be controlled in all the four quadrants without any loss of power .Energy is conserved during regenerative braking period. The digital controller dsPIC, is advantageous over other controller, as it combines the calculation capability of digital signal processor and controlling capability of PIC microcontroller to achieve a precise control. Simulation of the proposed model is done by using MATLAB/Simulink.
How to build a battery backup
This guide explains how a battery backup works, how to specify an inverter and how to size a battery bank for backup applications.
Magnetic amplifier final
The document discusses magnetic amplifiers, which are electromagnetic devices that amplify electrical signals without any moving parts. They work by using the principle of magnetic saturation of transformer cores to control the impedance of AC windings. Magnetic amplifiers were developed in the late 19th century and were widely used during World War II for applications like controlling rocket frequencies. They were also used for voice modulation in early radio, automatic landing systems in aircraft, and as potential switching elements in early computers due to advantages like reliability and ability to sum multiple inputs. While outdated today, magnetic amplifiers were an important early alternative to vacuum tubes.
Ac dc drives
This document provides an overview of electric drives. It begins with an introduction defining an electric drive as a device that converts electrical energy to mechanical energy. It then discusses the history of electric drives, noting they were first designed in 1838 in Russia. The document outlines various applications of electric drives including traction applications like electric trains and advantages such as high efficiency and pollution-free operation. It also lists some disadvantages like only being usable in areas with electric supply. Finally, it categorizes electric drives based on supply type (AC or DC) and number of machines (individual, group, or multi-motor).
TYPES OF SUBSTATION
There are four main types of substations: 1) switchyards at generating stations connect generators to the grid and provide on-site power, 2) customer substations primarily serve the needs of a single large customer, 3) system stations transfer bulk power across the network and serve as endpoints for transmission lines, providing power to distribution circuits, and 4) distribution stations are the most common and supply power directly to most customers by being located near load centers.
UPS Solutions for the Next Generation Data Center with Jen
What power protection builds, Why use a UPS system for a server room or data center, 8 important UPS topics to ask questions about, 3 types of UPS systems, What is the lifespan of a UPS chassis
Differential Drive
A differential drive consists of two independently driven wheels that allow a robot to turn by rotating the wheels at different speeds or in different directions. It uses a transformer and rectifier circuit as a power supply to convert alternating current to direct current for the motors. A control box with push buttons or switches is connected to direct the left and right wheels independently and control the robot's movement and turning.
UPPTCL CHAKIA 132KV
The document describes the 132kV Chakia Substation located in Lucknow, Uttar Pradesh, India. The substation has two parts - a 132kV switchyard and a 33kV switchyard. It receives power from two 132kV transmission lines and distributes power through four outgoing 33kV feeders. The substation contains various equipment to transform, protect, and monitor the flow of electricity, including transformers, lightning arresters, circuit breakers, and relays. The ultimate goal of the Uttar Pradesh Power Transmission Corporation is to reliably supply electricity to all citizens of Uttar Pradesh.
electronics and robotics
This document discusses various components used in robotics including electric motors, sensors, voltage regulators, and H-bridges. It describes how electric motors convert electrical energy to mechanical energy and lists common types like brushed DC motors, brushless DC motors, stepper motors, and servo motors. Sensors are outlined as playing a key role in robotics by allowing robots to maintain stability, report position/speed, interact with surroundings, distinguish objects, and mimic human senses. Voltage regulators are defined as devices that maintain a constant voltage level and various types are identified. H-bridges are described as circuits for controlling DC motor direction. Potential future applications of robotics discussed include expanded use in industrial, military, medical, and space
General analysis and design guideline for a battery buffer system with dcdc c...
General analysis and design guideline for a battery buffer system with dcdc converter and edlc for electric vehicles and its influence on efficiency
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Tactical Power
Energy Technologies' (ETI) products are the standard in rugged, high-reliability power conditioning for the defense, industrial, medical and telecommunications sectors. These modular products are in use around the world including Intelligent UPS, Power Inverters, PDUs, Power Conditioners, Frequency Converters, Portable Generators, Solar & Wind Energy, Fuel Cells, Energy Storage and Micro Grid Controllers.
ETI offers a wide range of products, but this site focuses primarily on our Tactical Power® lines. The rugged Tactical Power Series of power conditioning, generating, distribution, energy storage and associated products are readily deployable worldwide, quickly providing the Warfighter with dependable computer-grade power and/or medical-grade power for use in the field.
EPRI C&I ET Guide - FINAL
This document provides an overview of electric vehicle and equipment opportunities in commercial and industrial sectors. It discusses the benefits of electrification, including reducing emissions, saving money through lower fuel and maintenance costs, and improving productivity. Examples of electric vehicles and equipment currently used in various industries like airports, seaports, mining, goods transportation, and people movement are provided. These include airport ground support equipment, cranes, mining equipment, forklifts, and public transit vehicles. The document also includes a charging primer and discusses infrastructure considerations for commercial electric fleets.
Power Supply
This document summarizes the key components and operation of a practical power supply with a fixed 5V DC output voltage. It describes the use of a transformer to raise or lower voltages, a bridge rectifier for converting AC to DC, a smoothing capacitor to reduce voltage fluctuations, and a voltage regulator integrated circuit to maintain a constant output voltage. The document also mentions simulating this power supply circuit.
Generator-control-panels-8457720.ppsx
High Volt India manufactures and supplies a wide range of electrical control panels including ABB, HT, VCB, LT panels, relay control panels, and generator control panels. It has a fully computerized and equipped facility to design, assemble, test and deliver panels to various locations according to customer specifications. High Volt India offers competitive pricing and reliable service. Its panels have undergone testing and certification. The company produces panels for applications including HT, VCB, APFC, LT, bus ducts, capacitor control, relay control, generator control, and more to meet industrial automation needs.
More Related Content
What's hot
Ems project
The document compares the working of a brushless DC (BLDC) motor and an ordinary DC motor. Both motors work on the principle of Lorentz's law, which states that a current-carrying conductor in a magnetic field experiences a force. The BLDC motor has a stator, rotor, magnets, and Hall sensors instead of brushes. It has advantages like higher efficiency, power density, and lower noise. The ordinary DC motor uses brushes to conduct current and has advantages like lower cost and ability to be rebuilt.
Riello ups-powerbox-containerised-ups
Ecopowersupplies: PowerBox is a solution in fully equipped container that can be sent, installed and deployed in the space and provides continuous power supply.
Dynamic UPS
An UPS provides backup power when main power fails. A dynamic UPS differs from a static UPS in that it uses a flywheel instead of batteries to store energy. It provides near-instantaneous power during interruptions to start generators or safely shut down equipment. It has better transient response than static UPS and can handle heavy loads and fluctuations without interruption, making it suitable for critical applications like data centers, manufacturing processes, and electromagnetic lifting.
How does ups works
An uninterruptible power supply (UPS) provides backup power to devices when there is a disruption to the main power source. It consists of a rectifier that converts alternating current (AC) to direct current (DC), batteries that store the backup power, and an inverter that converts the stored DC power back to AC to power devices. UPS systems are available in various sizes, with small UPS providing power for a few minutes and large UPS able to power devices for several hours. The batteries determine how long the UPS can supply backup power. When the main power fails, the UPS seamlessly switches to the stored battery power to allow devices to shut down properly.
Electrical machines applications in robotics
The document discusses brushless DC motors and their use in robotics. It begins with an introduction to robots and the types of motors commonly used, including brushed DC motors, brushless DC motors, servo motors, and stepper motors. It then focuses on why brushless DC motors are preferable for robotics uses. The document goes on to explain the principle of operation, torque-speed characteristics, and applications of brushless DC motors, particularly their use in radio controlled planes. It concludes with some disadvantages of brushless DC motors.
Affordable & proviciency inverter(conference icaetm)
This document describes the design of an affordable and high-efficiency inverter. It uses an IC4049 oscillator circuit to produce a square wave output from a DC input voltage that is stepped up via a transformer to produce a high voltage AC output. A charging circuit is also included to charge the battery when mains power is restored. The circuit diagram and description are provided. Testing showed the designed inverter successfully converts the DC battery voltage to a high voltage AC output to power loads, with the goal of providing a low-cost solution to power electrical devices during power outages.
ELECTRICAL AC AND DC DRIVES
This document discusses electrical drives using AC and DC motors. It defines electrical drives as using around 50% of electrical energy for electric motors in industries and applications. The key components of electrical drives are the motor, power source, and control methods. For AC motor drives, the document discusses induction motors and synchronous motors. It also summarizes methods for controlling speed and torque of induction motors including stator voltage control, rotor voltage control, and frequency control. The document concludes that variable speed drives can improve energy efficiency compared to constant speed drives.
Speed Control of BLDC Motor with Four Quadrant Operation Using dsPIC
Brushless DC (BLDC) motor drives are becoming more popular in industrial and traction applications. Hence the control of BLDC motor in four quadrants is very vital. The flexibility of the drive system is increased using digital controller. In this paper the PWM signals for driving the power inverter bridge for BLDC motor have been successfully implemented using a dsPIC controller and the motor can be controlled in all the four quadrants without any loss of power .Energy is conserved during regenerative braking period. The digital controller dsPIC, is advantageous over other controller, as it combines the calculation capability of digital signal processor and controlling capability of PIC microcontroller to achieve a precise control. Simulation of the proposed model is done by using MATLAB/Simulink.
How to build a battery backup
This guide explains how a battery backup works, how to specify an inverter and how to size a battery bank for backup applications.
Magnetic amplifier final
The document discusses magnetic amplifiers, which are electromagnetic devices that amplify electrical signals without any moving parts. They work by using the principle of magnetic saturation of transformer cores to control the impedance of AC windings. Magnetic amplifiers were developed in the late 19th century and were widely used during World War II for applications like controlling rocket frequencies. They were also used for voice modulation in early radio, automatic landing systems in aircraft, and as potential switching elements in early computers due to advantages like reliability and ability to sum multiple inputs. While outdated today, magnetic amplifiers were an important early alternative to vacuum tubes.
Ac dc drives
This document provides an overview of electric drives. It begins with an introduction defining an electric drive as a device that converts electrical energy to mechanical energy. It then discusses the history of electric drives, noting they were first designed in 1838 in Russia. The document outlines various applications of electric drives including traction applications like electric trains and advantages such as high efficiency and pollution-free operation. It also lists some disadvantages like only being usable in areas with electric supply. Finally, it categorizes electric drives based on supply type (AC or DC) and number of machines (individual, group, or multi-motor).
TYPES OF SUBSTATION
There are four main types of substations: 1) switchyards at generating stations connect generators to the grid and provide on-site power, 2) customer substations primarily serve the needs of a single large customer, 3) system stations transfer bulk power across the network and serve as endpoints for transmission lines, providing power to distribution circuits, and 4) distribution stations are the most common and supply power directly to most customers by being located near load centers.
UPS Solutions for the Next Generation Data Center with Jen
What power protection builds, Why use a UPS system for a server room or data center, 8 important UPS topics to ask questions about, 3 types of UPS systems, What is the lifespan of a UPS chassis
Differential Drive
A differential drive consists of two independently driven wheels that allow a robot to turn by rotating the wheels at different speeds or in different directions. It uses a transformer and rectifier circuit as a power supply to convert alternating current to direct current for the motors. A control box with push buttons or switches is connected to direct the left and right wheels independently and control the robot's movement and turning.
UPPTCL CHAKIA 132KV
The document describes the 132kV Chakia Substation located in Lucknow, Uttar Pradesh, India. The substation has two parts - a 132kV switchyard and a 33kV switchyard. It receives power from two 132kV transmission lines and distributes power through four outgoing 33kV feeders. The substation contains various equipment to transform, protect, and monitor the flow of electricity, including transformers, lightning arresters, circuit breakers, and relays. The ultimate goal of the Uttar Pradesh Power Transmission Corporation is to reliably supply electricity to all citizens of Uttar Pradesh.
electronics and robotics
This document discusses various components used in robotics including electric motors, sensors, voltage regulators, and H-bridges. It describes how electric motors convert electrical energy to mechanical energy and lists common types like brushed DC motors, brushless DC motors, stepper motors, and servo motors. Sensors are outlined as playing a key role in robotics by allowing robots to maintain stability, report position/speed, interact with surroundings, distinguish objects, and mimic human senses. Voltage regulators are defined as devices that maintain a constant voltage level and various types are identified. H-bridges are described as circuits for controlling DC motor direction. Potential future applications of robotics discussed include expanded use in industrial, military, medical, and space
General analysis and design guideline for a battery buffer system with dcdc c...
General analysis and design guideline for a battery buffer system with dcdc converter and edlc for electric vehicles and its influence on efficiency
To Get this projects Call : 9566355386 / 99625 88976
Visit : www.lemenizinfotech.com / www.ieeemaster.com
Mail : projects@lemenizinfotech.com
Tactical Power
Energy Technologies' (ETI) products are the standard in rugged, high-reliability power conditioning for the defense, industrial, medical and telecommunications sectors. These modular products are in use around the world including Intelligent UPS, Power Inverters, PDUs, Power Conditioners, Frequency Converters, Portable Generators, Solar & Wind Energy, Fuel Cells, Energy Storage and Micro Grid Controllers.
ETI offers a wide range of products, but this site focuses primarily on our Tactical Power® lines. The rugged Tactical Power Series of power conditioning, generating, distribution, energy storage and associated products are readily deployable worldwide, quickly providing the Warfighter with dependable computer-grade power and/or medical-grade power for use in the field.
What's hot (18)
Affordable & proviciency inverter(conference icaetm)
Affordable & proviciency inverter(conference icaetm)
Speed Control of BLDC Motor with Four Quadrant Operation Using dsPIC
Speed Control of BLDC Motor with Four Quadrant Operation Using dsPIC
UPS Solutions for the Next Generation Data Center with Jen
UPS Solutions for the Next Generation Data Center with Jen
General analysis and design guideline for a battery buffer system with dcdc c...
General analysis and design guideline for a battery buffer system with dcdc c...
Similar to Hotware dc ac_work-vehicle_electrical_power
EPRI C&I ET Guide - FINAL
This document provides an overview of electric vehicle and equipment opportunities in commercial and industrial sectors. It discusses the benefits of electrification, including reducing emissions, saving money through lower fuel and maintenance costs, and improving productivity. Examples of electric vehicles and equipment currently used in various industries like airports, seaports, mining, goods transportation, and people movement are provided. These include airport ground support equipment, cranes, mining equipment, forklifts, and public transit vehicles. The document also includes a charging primer and discusses infrastructure considerations for commercial electric fleets.
Power Supply
This document summarizes the key components and operation of a practical power supply with a fixed 5V DC output voltage. It describes the use of a transformer to raise or lower voltages, a bridge rectifier for converting AC to DC, a smoothing capacitor to reduce voltage fluctuations, and a voltage regulator integrated circuit to maintain a constant output voltage. The document also mentions simulating this power supply circuit.
Generator-control-panels-8457720.ppsx
High Volt India manufactures and supplies a wide range of electrical control panels including ABB, HT, VCB, LT panels, relay control panels, and generator control panels. It has a fully computerized and equipped facility to design, assemble, test and deliver panels to various locations according to customer specifications. High Volt India offers competitive pricing and reliable service. Its panels have undergone testing and certification. The company produces panels for applications including HT, VCB, APFC, LT, bus ducts, capacitor control, relay control, generator control, and more to meet industrial automation needs.
chopper transformer
A chopper is a static device that converts a fixed DC input voltage into a variable DC output voltage. There are two main types of choppers: AC choppers and DC choppers. AC choppers first convert DC to AC with an inverter, then step up or down the AC voltage with a transformer, before rectifying it back to DC. DC choppers directly convert the voltage in one stage and are more efficient. Choppers work by using high-speed semiconductor switches to rapidly connect and disconnect the load from the power source. They are commonly used for motor control, solar/wind energy conversion, and powering electronics like computers and instruments.
Invertor Project PPt.pptx
The document presents a project on developing a power efficient mini inverter. It discusses (1) the project aims to produce a 12V DC to 240V AC output using an inverter circuit and transformer to step up power and is capable of producing 1000W of output, (2) a mini inverter uses switching and control circuits to transform DC to AC and can set the voltage and frequency, and (3) potential applications include powering devices during power cuts, in solar installations, and for equipment like pumps and conveyor belts.
Substation
A substation is a high-voltage electric facility used to switch generators, equipment, and circuits in and out of a system. It also changes AC voltages and converts between AC and DC. Substations can be classified by their service, mounting, function, type of apparatus, and control. They include transformers, switches, circuit breakers, and other equipment to distribute power at appropriate voltages for transmission and utilization.
Ev ppt
The document discusses the main parts of an electric vehicle (EV) including the electric motor, battery, charger port, battery converter, and motor drive. It provides details on the function of each part, such as how the charger port connects the EV to an external power source for charging, the battery stores energy, and the motor converter uses the battery power to run the motor that powers the wheels. It also discusses different battery technologies used in EVs like lithium-ion batteries.
AGMKSTECH profile
This document introduces an engineering consulting firm that provides online support and solutions for connecting buyers and sellers of industrial equipment in the fields of energy, power, and process. They offer a variety of equipment including transformers, circuit breakers, switchgear, and components for solar and thermal power projects. Their team of qualified engineers can source equipment from manufacturers in China, India, and the Philippines at reasonable prices and with good service.
Shailesh (10708)
This presentation discusses a step up chopper, which is a type of DC-DC converter that can increase voltage from a DC source. It operates by using semiconductors to create adjustable DC voltage from a fixed DC voltage source. A high step-up DC-DC converter is important for photovoltaic systems to improve efficiency by providing a stable high voltage link to the inverter. The presentation includes equations to calculate duty cycle, load resistance, capacitor size, and inductor size for a step-down chopper. It also discusses applications of choppers in electric vehicles, aircraft, and computer power supplies and analyzes a two-phase step-up converter design in MATLAB.
A Project Report On MINI INVERTER 12V TO 220V
This document is a project report on developing a mini inverter that converts 12V DC to 220V AC. It includes an acknowledgements section, abstract, index, and chapters on the inverter components and circuit design. The inverter uses a CD4047BC IC to generate 100Hz pulses that drive TIP122 and TIP3055 transistors. These amplify the signal to drive a step-up transformer that converts the 12V DC to 240V AC power that can be used for small loads like lights and fans. Diagrams of the circuit and PCB layout are included, along with descriptions of the main components like the IC, transistors, transformer, and battery power source.
internship report of 220/132 kV substation
This document provides an overview of an industrial training report submitted by Shivam Upadhyay at the Uttar Pradesh Power Transmission Corporation Limited (UPPTCL) 220/132 kV substation in Dadri, Uttar Pradesh from July 2-29, 2023. The report describes the electricity transmission and distribution processes at UPPTCL, the equipment used at the Dadri substation like transformers, circuit breakers, and instrumentation. It also includes a single line diagram of the substation and discussions of transformer and insulator types.
Implementation of a Microcontroller Base Single Phase Automatic Changeover
This document describes the design and implementation of a microcontroller-based single-phase automatic changeover system. The system automatically switches power sources between the main power supply and a generator in order to provide continuous power to loads. It uses a microcontroller to control relays that switch the load between available power sources. The system is designed to detect failures in the main power supply and automatically start the generator to power the load until main power is restored, at which point it switches back. The system aims to provide uninterrupted power for applications requiring continuous power such as hospitals, banks, and other critical systems.
variable frequency drive and its energy saving by MD FARYAD ALAM
Full detail of variable frequency drive and its energy saving.The report is submitted to at HPCL Bokaro depot
BHEL Vocational Training
Rahul Roy submitted a vocational training report on his experience at Bharat Heavy Electricals Limited (BHEL). BHEL is India's largest power equipment manufacturer, established in 1964. It has many manufacturing units across India producing equipment such as turbines, generators, transformers, and switchgear. Roy's report provided details on BHEL's products and the manufacturing processes for items like transformers, motors, switchgear, control gear, rectifiers, boilers, water turbines, and valves.
Interactive inverters
Interactive inverters convert DC power from batteries into AC power that can run standard 240V equipment. There are two main types - rotary inverters which are mechanical and less efficient, and electronic inverters which use solid state switching to produce AC power more efficiently. Modern electronic inverters can produce true sine wave output and have features like automatic standby mode, overload protection, and regulated output voltage. Factors to consider when selecting an inverter include the type of waveform required, output rating and efficiency, and safety certification. Inverters must be properly sized based on a load profile to match the continuous and peak power needs.
IRJET - Single Phase Inverter using MOSFET
This document describes the design and simulation of a single-phase inverter using MOSFETs. It discusses how inverters work to convert DC power to AC power and the components used in this single-phase inverter circuit. The inverter is designed to take a 12V DC input from a battery and provide a 1000VA, 220V AC output to power domestic loads. It uses MOSFETs for the inversion process due to their advantages over other transistors. The circuit design includes an oscillation stage to generate a 50Hz signal and a buffer stage to drive the MOSFET gates. The inverter successfully provides an AC output from the DC input to power electrical appliances.
Industrial Automatic Voltage Regulator Manufacturers
An automatic voltage stabilizer maintains a constant voltage output whenever the input voltage fluctuates. It protects expensive electrical equipment from high or low voltage issues. Voltage stabilizers are commonly used for air conditioners, printing machines, labs, industrial machines, and medical devices to keep them functioning properly despite voltage fluctuations in the power supply.
Hydraulic jack motorised remote 2015
This document provides details about the design and construction of a remote controlled motorized hydraulic jack. The summary is:
The remote controlled motorized hydraulic jack uses a 12V DC motor connected via a crankshaft to the hydraulic jack. The motor is powered by a 12V power supply and controlled remotely using a transmitter and receiver. The power supply steps down household AC voltage to 12V DC using a transformer, rectifier, and voltage regulators. The remote control allows single-person operation of the jack to lift vehicle tires without manual labor.
High Tension Current Transformer in Pune
Starlit Electricals is a leading manufacturer of electrical transformers and testing equipment located in Pune, India. They produce a wide range of transformers including current, potential, control, distribution, single and three phase, lighting, and specialty transformers. Starlit has ISO 9001 certification and exports products around the world. They have a modern manufacturing facility and test products to relevant standards to ensure high quality.
Similar to Hotware dc ac_work-vehicle_electrical_power (20)
Implementation of a Microcontroller Base Single Phase Automatic Changeover
Implementation of a Microcontroller Base Single Phase Automatic Changeover
variable frequency drive and its energy saving by MD FARYAD ALAM
variable frequency drive and its energy saving by MD FARYAD ALAM
Industrial Automatic Voltage Regulator Manufacturers
Industrial Automatic Voltage Regulator Manufacturers
More from Hotware International Inc.
Hotel WiFi 5Ghz and 2.4Ghz 10 watt , 5 watt commercial use i 14 aug 2014 b
Hotel WiFi 5Ghz and 2.4Ghz 10 watt , 5 watt commercial use i 14 aug 2014 bHotware International Inc.
25 channel 5Ghz WiFi and MIMO 2.4Ghz. The design for a Hotel varies based on Room Depth and wall construction, Always be aware that while this AP has 700mw of transmission power and a EIRP of 5 watt the clients Laptop has only 40mw of Tx power, passing through multiple walls absorb the signal to a point that its unstable and will not connect.
Most installs allow you to skip each second floor , but be careful not to space the AP2407 N MIMO too far apart when trying to reach the end of each room as shown here Sip 416 (sip proxy server) intro
This document discusses using a SIP-416 server to provide IP PBX and VoIP services. It can support up to 16 extensions and concurrent calls. The SIP-416 can be used alone as a SIP proxy server or combined with a PABX. It also supports SIP trunking and connections to smartphones via WiFi. Sample configurations include using the SIP-416 for voice with a separate router for data, connecting two SIP-416 servers via the internet, and supporting smartphone softphones over 3G or WiFi.
Transport truck fleet solutions by link champ 2013 rev 1.2
LinkChamp DC-AC is the only Taiwan manufacture with a full range of
inverters from 150 watts to 20Kw using its patented Intelligent Microprocessor
soft start design for Dc-AC Power Inverters, Battery Chargers, and Solar
Charger/Inverters . At the QC Quality Control a staff of 19 assure 100% of all
devices are tested before shipping. OEM/ODM Capability is offered with all
devices CE,LVD,EMC and E-Mark accreditation.
Dc ac link champ energy products-ch1.5 - copy
LinkChamp DC-AC is the only Taiwan manufacture with a full range of
inverters from 150 watts to 20Kw using its patented Intelligent Microprocessor
soft start design for Dc-AC Power Inverters, Battery Chargers, and Solar
Charger/Inverters . At the QC Quality Control a staff of 19 assure 100% of all
devices are tested before shipping. OEM/ODM Capability is offered with all
devices CE,LVD,EMC and E-Mark accreditation.
Solar fridge system
LinkChamp DC-AC is the only Taiwan manufacture with a full range of
inverters from 150 watts to 20Kw using its patented Intelligent Microprocessor
soft start design for Dc-AC Power Inverters, Battery Chargers, and Solar
Charger/Inverters . At the QC Quality Control a staff of 19 assure 100% of all
devices are tested before shipping. OEM/ODM Capability is offered with all
devices CE,LVD,EMC and E-Mark accreditation.
Dc ac link champ energy products-ch1.5 - copy small
This document provides information on various solar products including solar inverters, controllers, battery chargers, and accessories. It lists multiple product models ranging from 150W to 5000W for inverters and 10A to 50A for battery chargers. The document also includes information on mono-crystalline and polycrystalline solar cells and lists specific product models for solar panels ranging from 45W to 220W. Contact information and links to additional presentations are provided at the end.
Hotel wi fi
The document discusses a Wi-Fi access point and considerations for deploying it in a hotel. The CAP2405N access point has 802.11N technology, advanced MIMO, security features, and a Gigabit LAN port. When deploying it in a hotel, the depth of rooms and wall construction must be considered, as signal strength can be reduced passing through multiple walls. Access points should not be spaced too far apart to ensure coverage in long rooms. A bandwidth and billing server is also mentioned.
Shopping mall wi fi
This document provides design ideas and considerations for implementing a robust Wi-Fi system in a shopping mall. It discusses using access points deployed every 150-200 meters in hallways (line of sight) to provide Wi-Fi for customers, and every 20-40 meters to also provide in-store coverage penetrating walls (non-line of sight). Specific access point models are recommended, and installing multiple access points is advised to ensure adequate coverage and performance comparable to 3G networks. Partnering with cellular providers for equipment sharing and rental income is also presented as a strategy.
Sip 416 (sip proxy server) intro
This document discusses using a SIP-416 server to provide IP PBX and VoIP services. It can support up to 16 extensions and concurrent calls. The SIP-416 can be used alone as a SIP proxy server or combined with a PABX. It also supports SIP trunking and connections to smartphones via WiFi. Sample configurations include using the SIP-416 for voice with a separate router for data, connecting two SIP-416 servers via the internet, and supporting smartphone softphones over 3G or WiFi.
Solar fridge system s
This document describes a solar fridge system from Hotware that uses their DC-AC solar inverters and controllers from 300 to 5000 watts to provide free solar power for fridges. It offers intelligent microprocessor inverters and controllers that convert 12/24VDC solar power to 110VAC-230VAC, with systems available for any size. The system also uses long life, high output solar panels and DC-AC inverter controllers with X-LIN innovation.
Hotware dc ac products small
Hotware Wireless & EnergyX-LIN introduces their new production line for DC-AC power back-up and management solutions. They offer a variety of power management solutions ranging from reliable power backup inverters to innovative solar charging systems to suit customer needs. Their full line of power management equipment includes power backup devices, cables, solar charging systems, solar charging controllers, inverters, battery chargers, and solar accessories. They have years of experience deploying power solutions for rural sites and investing in their product line to meet power supply demands.
Transport truck fleet solutions by hotware
1) Installing an inverter system in trucks allows drivers to power electronics and appliances without idling the engine, saving on fuel costs and reducing emissions.
2) Idling engines is inefficient and wastes fuel, but drivers idle to power devices; inverters eliminate this need.
3) The document provides an example payback calculation for a fleet of 5 trucks, estimating a cost savings of over $112,000 over 3 years by eliminating idling with inverters.
MIMO 2.4Ghz 300Mbps system &P Wi Max Wisp Wi Fi Wi Max Mesh Systems 2010...
MIMO 2.4Ghz 300Mbps system &P Wi Max Wisp Wi Fi Wi Max Mesh Systems 2010...Hotware International Inc.
Hotware builds long-range wireless solutions for data, voice and TV. With a decade of experience and development in the long-rang cordless phone industry, Hotware International is a specialist in long-range wireless communication solutions and applications.
Hotware Total Solution Division completed its full offering and was released in 2008 and presently have several National ISP development projects under deployment through the world , These include ISP WiFi with roaming, VOIP and IPTV delivery with on site training and project management support.XLINK-A300N Mobile IP City Wi-Fi System AP rated 300Mbps
MIMO is an important part of modern wireless communication standards such as IEEE 802.11n (Wifi), 4G, 3GPP Long Term Evolution, WiMAX and HSPA+.
2x2 MIMO, dual-radio, 5GHz/2.4GHz outdoor long range up to 20Km
5GHz Bridge 802.11N/A 300Mbps
2.4GHz AP 802.11N/G/B 300Mbps
Total 4x antenna ports; Bridge and AP each 2 antenna ports
IP68 rated enclosure, true weather-proof, -35c ~ 75c
Built-in lightning protection circuits
LOS 20Km and NLOS 2-4Km with increased ranges on Laptops and Ipads etc 300-500M using MIMO technology
IPTV
The. X-LIN 4-16/20 IPTV is a 4 channel live steaming IPTV server. But it also has the capability of up to an additional 16 channels of IPTV [ based on Bandwidth size] from the file section of the hard drive bays !
The additional 16 IPTV channels work the same as the Live ones as there is a URL also created when the Encoder is Published. But the content must be stored on the hard drives in the unit ! We only supply the machine with built in 1TB HD. But it has an additional space for 4 of the 2 Terri bite HD if desired at additional costs.
www.hotware.asia info@hotware.asia
Wisp Wi Fi Wi Max Mesh Systems 2010
The document discusses Long Range Wireless LAN Platform X-LIN from Hotware Wireless Co., Ltd. It provides an overview of the network topology, billing and bandwidth management systems, and managed system switches. It also describes various wireless products available including outdoor CPE units, backhaul systems, access points, and MESH networking solutions for establishing wireless networks.
Iptv1.1 2010
X-LIN Hotware Wireless Co., Ltd. is a company located in Asia that produces wireless technology and can be contacted via email or their website www.hotware.asia. The document appears to be a letter or report from X-LIN Hotware Wireless Co., Ltd. dated March 2010 that may provide contact information or details about their wireless products and services.
New 25 Channel 5 Ghz Wi Fi
A new 25 channel 5GHz WiFi system supports data rates up to 108Mbps for fixed wireless clients, laptops, and mobile users over distances up to 30km. The system includes various access points, client devices, and repeaters that operate on the less crowded 5GHz band and provide 25 non-overlapping channels to avoid interference. As of 2009, most laptops also include built-in 5GHz 802.11a/b/g/n WiFi support.
Mesh500 Wi Fi X Lin
This document provides technical details about wireless network infrastructure located in Sainte-Clotilde, Reunion, including its geographical coordinates and components like a backhaul tower, switch, UPS, and billing and management systems to support up to 1 million users.
More from Hotware International Inc. (20)
Hotel WiFi 5Ghz and 2.4Ghz 10 watt , 5 watt commercial use i 14 aug 2014 b
Hotel WiFi 5Ghz and 2.4Ghz 10 watt , 5 watt commercial use i 14 aug 2014 b
Transport truck fleet solutions by link champ 2013 rev 1.2
Transport truck fleet solutions by link champ 2013 rev 1.2
Dc ac link champ energy products-ch1.5 - copy small
Dc ac link champ energy products-ch1.5 - copy small
MIMO 2.4Ghz 300Mbps system &P Wi Max Wisp Wi Fi Wi Max Mesh Systems 2010...
MIMO 2.4Ghz 300Mbps system &P Wi Max Wisp Wi Fi Wi Max Mesh Systems 2010...
XLINK-A300N Mobile IP City Wi-Fi System AP rated 300Mbps
XLINK-A300N Mobile IP City Wi-Fi System AP rated 300Mbps
Recently uploaded
Graphic Design Tools and Software .pptx
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Passive House: The Economic and Environmental Solution for Sustainable Real Estate. Lecture by Tim Eian of TE Studio Passive House Design in November 2022 in Minneapolis.
- The Built Environment
- Let's imagine the perfect building
- The Passive House standard
- Why Passive House targets
- Clean Energy Plans?!
- How does Passive House compare and fit in?
- The business case for Passive House real estate
- Tools to quantify the value of Passive House
- What can I do?
- Resources
UNIT IV-VISUAL STYLE AND MOBILE INTERFACES.pptx
Visual Style and Aesthetics: Basics of Visual Design
Visual Design for Enterprise Applications
Range of Visual Styles.
Mobile Interfaces:
Challenges and Opportunities of Mobile Design
Approach to Mobile Design
Patterns
一比一原版(LSBU毕业证书)伦敦南岸大学毕业证如何办理
学校原件一模一样【微信：6496090 】【(LSBU毕业证书)伦敦南岸大学毕业证成绩单】【微信：6496090 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微6496090
【主营项目】
一.毕业证【q微6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(LSBU毕业证书)伦敦南岸大学毕业证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
一比一原版(BU毕业证)波士顿大学毕业证如何办理
BU毕业证学位证【微信95270640】办理BU毕业证【Q微信95270640】波士顿大学毕业证书原版↑制作波士顿大学学历认证文凭办理波士顿大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办波士顿大学波士顿大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.波士顿大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供波士顿大学波士顿大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思念父亲了老想着进父亲的城看看每次从城里洋里洋气地回来小伙伴们总争论着各自到过的城比试比试谁父亲的城最大最美他们大谈城里的新鲜事大谈父亲携他们逛城的快乐事在孩子们幼小的心中地
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
CapCut is an easy-to-use video editing app perfect for beginners. To start, download and open CapCut on your phone. Tap "New Project" and select the videos or photos you want to edit. You can trim clips by dragging the edges, add text by tapping "Text," and include music by selecting "Audio." Enhance your video with filters and effects from the "Effects" menu. When you're happy with your video, tap the export button to save and share it. CapCut makes video editing simple and fun for everyone!
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
The Game Concept created as a Final Project piece for college. Creative Media year 2 student
PDF SubmissionDigital Marketing Institute in Noida
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
Storytelling For The Web: Integrate Storytelling in your Design Process
In this slides I explain how I have used storytelling techniques to elevate websites and brands and create memorable user experiences. You can discover practical tips as I showcase the elements of good storytelling and its applied to some examples of diverse brands/projects..
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
ARENA - Young adults in the workplace (Knight Moves).pdf
Presentations of Bavo Raeymaekers (Project lead youth unemployment at the City of Antwerp), Suzan Martens (Service designer at Knight Moves) and Adriaan De Keersmaeker (Community manager at Talk to C)
during the 'Arena • Young adults in the workplace' conference hosted by Knight Moves.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
Recently uploaded (20)
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Virtual Tour Application Powerpoint for museum of edinburgh
Virtual Tour Application Powerpoint for museum of edinburgh
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANE
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
PDF SubmissionDigital Marketing Institute in Noida
PDF SubmissionDigital Marketing Institute in Noida
Storytelling For The Web: Integrate Storytelling in your Design Process
Storytelling For The Web: Integrate Storytelling in your Design Process
ARENA - Young adults in the workplace (Knight Moves).pdf
ARENA - Young adults in the workplace (Knight Moves).pdf
Hotware dc ac_work-vehicle_electrical_power
- 1. Hotware Energy DC-AC Vehicle Electrical Power
- 2. Commercial Work Truck Inverter Electricity • Hotware Energy DC-AC Inverters provide in-vehicle AC power to work & utility vehicles, heavy duty trucks and emergency vehicles to operate tools, appliances, lights and other electronic equipment wherever they are needed. • Hotware DC-AC inverters take stored battery power and [environmentally friendly ] silently convert it to AC power eliminating the need of installing and maintaining noisy generators as a mobile AC power source. • The Diagram on the next page of Hotware DC-AC Auto-Transfer/ inverter/charger installed on a typical heavy duty truck or utility/work truck takes stored battery power and converts it to AC power to run appliances like Grinders, Drills, Electric chain saws, heat guns and other work tools. Inverting power from a battery bank is a quiet and environmentally friendly alternative to idling the engine to supply power to the cab.
- 4. • When the truck is supplied with external AC power, at a truck stop , or service center for example, the Auto-transfer/ inverter/charger takes the incoming power and recharges the batteries back to full capacity. Excess power is supplied to the cab or work area to run appliances and tools. • If no external AC power is available, the Auto- transfer/inverter/charger will draw 12-volt DC power from the battery banks and invert it into 120-230 volt AC. An internal transfer switch senses whether external AC power is present, allowing the unit to instantly switch from charge mode to invert mode when power is disconnected. • Hotware DC-AC inverters can be installed as an OEM option or as an aftermarket installation. Hotware manufactures a full line of remote panels and cable accessories for our inverters and Auto-Transfer/inverter/chargers, so system performance can be monitored at a glance from inside the truck.
- 5. Remote Panel Auto-Transfer / Inverter /Charger from 300-5000 watt and Custom up to 20kw
- 7. X-LIN Innovation Thank you ! Hotware Intl’ Co., Ltd. www.hotware.com.tw business@hotware.com.tw Tel : +886-3-4639125 Fax ; +886-3-4639367 Integration Center integrate@hotware.com.tw business@dc-ac.com chaucer@dc-ac.com Jhardy@dc-ac.com