This document describes Hommel-Etamic America Corporation and their design and build applications using standard products. It provides details on their crankshaft and bearing measurement systems, including lists of check points and special features like granite table tops, air bearings, and software. Fixtures and gages are mentioned for gears, transmission components, and valve bodies.

1. Hommel-Etamic America
Corporation
Design and Build Applications Using
Standard Products

2. Crankshaft’s

3. 3
Checks (Crankshaft):
Surface Finish
Contour
Fillet Radius
Special Features:
Granite Table Top
Guide Rails
Mobile Computer Cabinet
Air Isolation Bearings
Waveline 60
Wavelift 400
Turbowave Software
Contour Gage Head
CRANKSHAFT
HB-0338 May, 2008

4. 4
Special Features:
Waveline Measurement Unit
Turbowave Software
Air Bearings for Granite Isolation
Mobile Computer Cabinet
Joystick Control of All Axes
Motorized Drive Unit Tilt
Angular Repeatability to ±0.002º
Versatile Setup for Wide Range of Part
Sizes
T-Slot for Mounting Specialized Fixtures
BEARINGS
Lab Quality Surface System
HB357
GAGELINE – WAVELINE – BENCHLINE – FORMLINE – PROCESSLINE – OPTICLINE – MOVOLINE – OPTI-SENS –
COMPONENTLINE
Checks (Bearing):
Tapered Roller Bearing
Cups
Cones
Rollers
Profile/Crowning
Surface Finish
Angularity

5. 5
Special Features:
450mm Wavelift Column
Waveline Measurement Unit
Turbowave Measurement Software
Air Bearing for Granite Isolation
Mobile Computer Cabinet
Rotary Encoder
Versatile Setup for Wide Range of Parts
0 to 90º Tilt Table with Part V
Manual X, Y, and Angular Adjustment
BEARINGS
Lab Quality Surface System
HB378
GAGELINE – WAVELINE – BENCHLINE – FORMLINE – PROCESSLINE – OPTICLINE – MOVOLINE – OPTI-SENS –
COMPONENTLINE
Checks (Bearing):
Tapered Roller Bearing
Cups
Cones
Rollers
Profile/Crowning
Surface Finish

6. 6
Gears
Fixture Application: Tooth Flanks
Multiple Fixtures / One Drive Unit
Drive unit slides on cam mechanism to
protect and position probe

7. Transmission Components
Hand Apply Gages: Valve Bodies, Input Covers, Transmission Cases
 Template Gages
Large Diameter
Small Bore

8. Valve Bodies