GxP is a general abbreviation for the "good practice" quality guidelines and regulations. These slides provide an overview of current regulations, with a focus on pharmaceuticals and healthcare.
MARKETING AUTHORISATION, LICENSING AND QUALITY ASSESSMENT OF VACCINES IN INDI...Swapnil Fernandes
- European pharmaceutical legislation provides a comprehensive framework for the marketing authorisation of vaccines.
- In contrast to the European scenario, the Indian scenario for vaccines is relatively less regulated and follows the same process of approval as other biologics in spite of having a National Handbook for Vaccine Policy.
- Vaccine authorisation in the US, as is the case in EU, is a more straightforward process than in most other markets as the USFDA has provided vaccines with a distinct set of regulations in concerned areas of safety and quality.
Quality System Requirements 21 CFR Part 820 and Labelling Requirements for Me...Swapnil Fernandes
Covers the following details -
- What is QMS ?
- QMS subparts
- QMS Inspection
- What is a label ?
- What is labelling ?
- Labelling requirements and regulations
- Labelling based on the types of submission
Product lifecycle management: process of managing the entire lifecycle of a product from its conception, through design and manufacture, to service and disposal.
NSF certification, Standard for dietary supplementAtul Bhombe
Manufacturers, regulators and consumers look to NSF International for the development of public health standards and certification programs that help protect the world’s food, water, consumer products and environment. NSF is a global, independent organization, our standards team facilitates development of public health standards, and our service teams test, audit and certify products and services
GxP is a general abbreviation for the "good practice" quality guidelines and regulations. These slides provide an overview of current regulations, with a focus on pharmaceuticals and healthcare.
MARKETING AUTHORISATION, LICENSING AND QUALITY ASSESSMENT OF VACCINES IN INDI...Swapnil Fernandes
- European pharmaceutical legislation provides a comprehensive framework for the marketing authorisation of vaccines.
- In contrast to the European scenario, the Indian scenario for vaccines is relatively less regulated and follows the same process of approval as other biologics in spite of having a National Handbook for Vaccine Policy.
- Vaccine authorisation in the US, as is the case in EU, is a more straightforward process than in most other markets as the USFDA has provided vaccines with a distinct set of regulations in concerned areas of safety and quality.
Quality System Requirements 21 CFR Part 820 and Labelling Requirements for Me...Swapnil Fernandes
Covers the following details -
- What is QMS ?
- QMS subparts
- QMS Inspection
- What is a label ?
- What is labelling ?
- Labelling requirements and regulations
- Labelling based on the types of submission
Product lifecycle management: process of managing the entire lifecycle of a product from its conception, through design and manufacture, to service and disposal.
NSF certification, Standard for dietary supplementAtul Bhombe
Manufacturers, regulators and consumers look to NSF International for the development of public health standards and certification programs that help protect the world’s food, water, consumer products and environment. NSF is a global, independent organization, our standards team facilitates development of public health standards, and our service teams test, audit and certify products and services
The European Commission Health and Consumers Directorate – General has published a draft “GUIDELINES ON THE PRINCIPLES OF GOOD DISTRIBUTION PRACTICES FOR ACTIVE SUBSTANCES FOR MEDICINAL PRODUCTS FOR HUMAN USE”.
The guideline addresses Quality systems, Personnel, Documentation, Order, Procedures, Records, Premises and Equipment, Receipts, Storage , Deliveries to Customers, Transfer of Information and Returns.
Following presentation is prepared by “ Drug Regulations” a non profit organization which provides free online resource to the Pharmaceutical Professional.
This presentation is aimed at providing information on automation in the GLP practices in the pharmaceutical industry.
-Standard Operating Procedures.
-Documentation in GALP.
-Logs and Related Forms.
REGULATORY ASPECTS OF FOOD & NUTRACEUTICALS A GLOBALKapilKumar198
This presentation contains detailed information about the regulatory aspects of food and nutraceuticals a global prospective, which includes WHO guidelines on nutrition and NSF International.
Herbal medicines are popular because of experience and the abundant
availability of plants in India due to its varied climatic zones. India has
around 45,000 species of plants, out of which 15,000–20,000 plants have
proven medicinal value.
The European Commission Health and Consumers Directorate – General has published a draft “GUIDELINES ON THE PRINCIPLES OF GOOD DISTRIBUTION PRACTICES FOR ACTIVE SUBSTANCES FOR MEDICINAL PRODUCTS FOR HUMAN USE”.
The guideline addresses Quality systems, Personnel, Documentation, Order, Procedures, Records, Premises and Equipment, Receipts, Storage , Deliveries to Customers, Transfer of Information and Returns.
Following presentation is prepared by “ Drug Regulations” a non profit organization which provides free online resource to the Pharmaceutical Professional.
This presentation is aimed at providing information on automation in the GLP practices in the pharmaceutical industry.
-Standard Operating Procedures.
-Documentation in GALP.
-Logs and Related Forms.
REGULATORY ASPECTS OF FOOD & NUTRACEUTICALS A GLOBALKapilKumar198
This presentation contains detailed information about the regulatory aspects of food and nutraceuticals a global prospective, which includes WHO guidelines on nutrition and NSF International.
Herbal medicines are popular because of experience and the abundant
availability of plants in India due to its varied climatic zones. India has
around 45,000 species of plants, out of which 15,000–20,000 plants have
proven medicinal value.
Current Good Manufacturing Practices in Food IndustryPECB
Good manufacturing practice (GMP) is a system for ensuring that products are consistently produced and controlled according to the quality standards. There are many risks: unexpected contamination of products, causing damage to health or even death; incorrect labels on container, etc. This webinar will guide you through all of the requirements, steps you need to take going from concepts to implementation of appropriate measures.
Main points covered:
• Current good manufacturing practice (CGMP) requirements
• A Quality Management System for medical devices Required By FDA (Food & Drug Association) USA
• From Concepts to implementation
Presenter:
This webinar was presented by PECB Certified Trainer, who is also a senior consultant, trainer and coach in Occupational Health and Safety, Mr. Raza Shah.
Link of the recorded session published on YouTube: https://youtu.be/9ZTtnAQn3HQ
Introduction to active pharmaceutical ingredients (API)WebConnect Pvt Ltd
API- active Pharmaceutical ingredient is an active part of pharmaceutical drug or pesticide. In most of drugs, there are usually two different kind of chemical ingredients, One is inert part of drug called excepient and another is active ingredient called API.
For any disease, the remedy is chosen based upon the type of active ingredien.......
It's an assignment on selected topics on Pharmaceuticals. Which are
1. Quality Management system in Pharmaceutical Industry
2. Quality Assurance and Quality Control in Pharmaceutical Industry
3. Difference between Quality Assurance and Quality Control
4. Briefly describe Pharmacopoeia, Drug Formulary, Drug compendia,
Pharmaceutical codex
5. Short notes on British Pharmacopoeia, US Pharmacopoeia,
European Pharmacopoeia, Japanese Pharmacopoeia, British
Pharmaceutical Codex
6. What is monograph in Pharmacopoeia? What does it contain?
Quality management systems - INDUSTRIAL PHARMACY llJafarali Masi
syllabus
Quality management & Certifications: Concept of Quality, Total Quality Management, Quality by Design (QbD), Six Sigma concept, Out of Specifications (OOS), Change control, Introduction to ISO 9000 series of quality systems standards, ISO 14000, NABL, GLP
Review Article: PROCESS ANALYTICAL TECHNOLOGY- Innovative pharmaceutical deve...Vignan University
Process Analytical Technology in pharmaceutical production checks the quality of the raw material attributes
both physically and chemically, that too off-line, in-line or on-line. Process analytical technologies have been
applied to manufacturing processes for decades. PAT is a system for design, analysis, and control of
manufacturing processes, 1
based on continuous monitoring/rapid measurements of critical quality and
performance attributes of raw material, intermediates and products. PAT involves measurement science by
using conventional process sensors such as pressure, temperature and probes. The PAT initiative was initially
intended for traditional pharmaceutical manufacturers, but the FDA.s, PAT guidance now clearly states that it
applies to all manufacturers of human and veterinary drug products. PAT involves shift from testing the quality
to building quality into products by testing at several intermediate steps. It specifically requires that
quantifiable, causal, and predictive relationships be established among the raw materials. There by decreasing
the chances of contamination and cross contamination. It also saves a huge amount of time and money required
for sampling and analysis of the products. Overall PAT paves a way for producing a quality product thus
satisfying the customer needs and creating a good brand image for the organization. PAT that will encourage
the voluntary development and implementation of innovative pharmaceutical development, manufacturing, and
quality assurance as well as novel analyzer technologies.
Similar to GxP and cGxP in Bio/Pharmaceutical Industry (20)
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
Digital Tools and AI for Teaching Learning and Research
GxP and cGxP in Bio/Pharmaceutical Industry
1. GxP and cGxP in Bio/Pharmaceutical
Industry
Prof. Dr. Basavaraj K. Nanjwade M. Pharm., Ph. D
Department of Pharmaceutics
KLE University College of Pharmacy
BELGAUM – 590010, Karnataka, India
E-mail: bknanjwade@yahoo.co.in
Cell No: 00919742431000
28 March 2011 1Department of Pharmaceutics
2. GxP
• The bio/pharmaceutical industry has created its own
language and GxP is one of many acronyms that we all
tend to use.
• While this may seem “elementary” to some of you,
many people may not know what this means.
• G = Good
x (variable replaced with Manufacturing, Clinical,
Laboratory, Storage, Distribution and Review)
P = Practice
2Department of Pharmaceutics28 March 2011
3. GxP
• As you can see, GxP is used as short-hand form for
referring to the regulations established by the United States
Food and Drug Administration which are published in the
Code of Federal Regulations.
• Sometimes people refer to the “GCPs” which specifically
regards the rules that govern clinical trials vs. product
manufacturing (GMPs) or laboratory regulations (GLPs).
• Together, these are known collectively as the “predicate
rules” that govern a wide spectrum of regulatory obligations
across this diverse industry.
3Department of Pharmaceutics28 March 2011
4. GxP
• GxP is also where citations emanate from (typically) as
regards FDA inspections.
• When a regulation is cited, the title tells you where it is
published.
For example: 21 CFR 312.2
Means:
21 = Title 21
CFR = Code of Federal Regulations
312.2 (312 = part and 2 =section)
4Department of Pharmaceutics28 March 2011
6. GxP
• “GxP” is a collective term for the Good Practice quality
guidelines and regulations used in many fields,
encompassing such internationally-recognized standards
as GMP, GCP, GLP, GSP, GDP and GRP.
• GxP guidelines are designed to ensure that products are
safe, meet their intended use and, in regulated industries
such as drugs, food, medical devices and cosmetics,
adhere to quality processes during manufacturing, control,
storage and distribution.
6Department of Pharmaceutics28 March 2011
7. GxP
• GxP is a general term for Good Practice quality
guidelines and regulations. These guidelines are used
in many fields, including the pharmaceutical and food
industries.
• The titles of these good practice guidelines usually
begin with "Good" and end in "Practice", with the
specific practice descriptor in between.
• GxP represents the abbreviations of these titles, where
x (a common symbol for a variable) represents the
specific descriptor.
7Department of Pharmaceutics28 March 2011
11. List of GxP’s in Pharmaceuticals
1. GMP – (Good manufacturing Practice)
2. GCP – (Good Clinical Practice)
3. GLP – (Good Laboratory Practice)
4. GSP – (Good Storage Practice)
5. GDP – (Good Distribution practice)
6. GRP – (Good Review Practice)
11Department of Pharmaceutics28 March 2011
12. Purpose of GxP
• The purpose of the GxP quality guidelines is to ensure a
product is safe and meets its intended use.
• GxP guides quality manufacture in regulated industries
including food, drugs, medical devices and cosmetics.
The most central aspects of GxP are:
1. Traceability: the ability to reconstruct the development
history of a drug or medical device.
2. Accountability: the ability to resolve who has contributed
what to the development and when. 12Department of Pharmaceutics28 March 2011
14. GMP – (Good Manufacturing Practice)
28 March 2011 Department of Pharmaceutics 14
15. What is GMP ?
• GMP is that part of Quality assurance which ensures that
the products are consistently manufactured and controlled
to the Quality standards appropriate to their intended use
• A set of principles and procedures which, when followed by
manufacturers for therapeutic goods, helps ensure that the
products manufacture will have the required quality.
28 March 2011 Department of Pharmaceutics 15
16. Good Manufacturing Practices
• A basic tenet of GMP is that quality cannot be tested into a
batch of product but must be built into each batch of
product during all stages of the manufacturing process.
• It is designed to minimize the risks involved in any
pharmaceutical production that cannot be eliminated
through testing the final product.
- Some of the main risks are unexpected contamination of products, causing damage to
health or even death
- In correct labels on containers, which could mean that patient receive the wrong
medicine.
- Insufficient or too much active ingredient, resulting in ineffective treatment or adverse
effects.
28 March 2011 Department of Pharmaceutics 16
18. GMP
• GMP is the magic key that opens the door of
the Quality
• In matter of GMP, swim with the current and
in matter of Quality stand like a rock!
28 March 2011 Department of Pharmaceutics 18
19. GMP
28 March 2011 Department of Pharmaceutics 19
GMP
Is that part of Quality
Assurance aimed at
ensuring that products are
consistently manufactured
to a quality appropriate to
their intended use
20. GMP guidelines
• GMP as per Schedule “M”
• GMP as per WHO
• GMP as per MCA now known as MHRA
• GMP as per TGA
• GMP as per US FDA
• GMP as per ICH guidelines
28 March 2011 Department of Pharmaceutics 20
21. GMP guidance documents
• EU Good Manufacturing Practice (GMP)
Guidelines, Volume 4 of “The rules governing
medicinal products in the European Union”
• US FDA current Good Manufacturing Practice
(cGMP) for finished pharmaceuticals, 21 CFR, 210
and 211
• WHO Good Manufacturing Practices for
pharmaceutical products, Annex 4 to WHO
Technical Report Series, No. 908, 2003
21Department of Pharmaceutics28 March 2011
22. GMP
• GMP in solid dosage forms
• GMP in semisolid dosage forms
• GMP in Liquid orals
• GMP in Parenterals Production
• GMP in Ayurvedic medicines
• GMP in Bio technological products
• GMP in Nutraceuticals and cosmeceuticals
28 March 2011 Department of Pharmaceutics 22
31. Ten Principles of GMP
1. Design and construct the facilities and equipments
properly
2. Follow written procedures and Instructions
3. Document work
4. Validate work
5. Monitor facilities and equipment
6. Write step by step operating procedures and work on
instructions
7. Design ,develop and demonstrate job competence
8. Protect against contamination
9. Control components and product related processes
10. Conduct planned and periodic audits
28 March 2011 Department of Pharmaceutics 31
32. Beyond GMP
• Reduce pollution - Zero discharge
• Adaptation of environment friendly methods
• Consideration for better and healthier life tomorrow
• Consideration of ethics in life
• One should begin with end in mind otherwise it will be the
beginning of the end
28 March 2011 Department of Pharmaceutics 32
33. Cost of effective GMP
• In fact Cost benefits – positive cost benefits of GMP/QA
• Good plant lay out, Smooth work flows, Efficient
documentation systems, well controlled process, good
stores lay outs and stores records- These are Good
manufacturing practices
• Reduction in work in process and inventory holding costs
• Avoidance of cost of Quality failure ( cost of waste, of
rework, of recall, of consumer compensation and of loss of
company reputation28 March 2011 Department of Pharmaceutics 33
34. Cost / Benefit analysis
• GMP is not an “On-cost”.
• It is not even “Just free”
• It is a contribution to profit
• Good manufacturing Practice is also Good
management Practice leading to Good
Manufacturing Profit
• GMP is central and basic and has cost benefits
( not to be considered as extrinsic or imposed
upon manufacturing activities)
28 March 2011 Department of Pharmaceutics 34
35. Cost / benefit analysis
28 March 2011 Department of Pharmaceutics 35
• Cost of quality = Cost of A – Cost of B- Payback from C = Profit
A B C
Staff Scrap Improved morale
Training Rework Motivation
Systems Complaints Faster throughput
Documentation Chaos Higher productivity
Equipment Lost sales Increased sales
Maintenance Recalls lower inventory
Calibration Closedown
Sampling
Testing
In process control
Validation
Auditing
36. GCP – (Good Clinical Practice)
28 March 2011 Department of Pharmaceutics 36
37. What It Is GCP
• An international ethical & scientific quality standard for
designing, conducting, recording & reporting human clinical
studies
– EU
– Japan
– US
• Applies to registration studies that may have an impact on
safety & welfare of human subjects
28 March 2011 Department of Pharmaceutics 37
38. GCP Participating Parties
• IRB/Ethics Committee
• Investigators
• Sponsor
• Regulatory Authorities
28 March 2011 Department of Pharmaceutics 38
39. GCP Key Documents
• Investigator Brochure
• Study Protocol
• Informed Consent Document
28 March 2011 Department of Pharmaceutics 39
40. GCP Principles
1. Studies in accordance with Declaration of Helsinki;
consistent with GCP & applicable regulatory
requirements
2. Studies initiated & continued only if anticipated
benefits outweigh risks
3. Rights, safety & welfare of human subjects take
priority over interests of science & society
4. Available non-clinical & clinical info on product
adequate to support study
28 March 2011 Department of Pharmaceutics 40
41. GCP Principles
5. Studies scientifically sound; described in clear,
detailed protocol
6. Study in compliance with IRB/EC approved protocol
7. Medical care given to subjects is the responsibility of
qualified medical professional(s)
8. Individuals conducting studies qualified by education,
training & experience
9. Freely given informed consent obtained from every
subject prior to study participation
28 March 2011 Department of Pharmaceutics 41
42. GCP Principles
10. Study information recorded, handled & stored to
allow accurate reporting, interpretation & verification
11. Confidentiality of subject records protected in
accordance with applicable regulatory requirements
12. Investigational products manufactured, handled &
stored in accordance with GCP & used in accordance
with approved protocol
13. Systems/procedures implemented to assure quality
of study
28 March 2011 Department of Pharmaceutics 42
43. IRB/EC Roles & Responsibilities
To safeguard study subjects’ rights & welfare by:
• Evaluation/disposition of study proposal
• Evaluation of proposed subject consent materials
• Evaluation of emergency use consent methodology
• Evaluation of investigator qualifications
• Ongoing review of study progress (at least yearly)
• Evaluation of proposed subject compensation plans
28 March 2011 Department of Pharmaceutics 43
44. IRB/EC Composition & Operations
• Membership has qualifications & experience to evaluate
science, medical aspects & ethics of proposed study
– ≥ 5 members
– ≥ 1 member whose primary interest in nonscientific
– ≥ 1 member independent of institution or study site
• Written SOPs & records
• Decisions rendered at announced meetings with quorum in
attendance
28 March 2011 Department of Pharmaceutics 44
45. IRB/EC Composition & Operations
• Only members participating in review should
vote
• Investigator may provide info on study, but
should not be involved in review or vote
• Nonmembers with expertise in special areas
may be invited to assist with review (but cannot
vote)
28 March 2011 Department of Pharmaceutics 45
46. IRB/EC Procedures
• Document group membership & qualifications
• Schedule meetings & notify members
• Conduct initial & ongoing review of studies
• Determine ongoing review frequency
• Provide expedited review of minor study changes, in
accordance with regulatory requirements
• Specify that no subject should be enrolled in study
prior to IRB/EC approval
28 March 2011 Department of Pharmaceutics 46
47. IRB/EC Procedures
• Specify that no deviations from protocol should be initiated
without prior IRB/EC approval
– Emergency situations require immediate notification of IRB/EC after the
fact
• Specify that Investigator should promptly report:
– Protocol deviations
– Changes increasing subject risk or study procedures
– Serious and unexpected adverse events
28 March 2011 Department of Pharmaceutics 47
48. IRB/EC Procedures
• Notify Investigator promptly of:
– Study-related decisions
– Reason for decisions
– Procedures for appeal of decisions
28 March 2011 Department of Pharmaceutics 48
49. IRB/EC Required Records
• Relevant records maintained ≥ 3 yr after study
completion
• Records available for review by regulatory
authorities
28 March 2011 Department of Pharmaceutics 49
50. IRB/EC What is Reviewed
• Investigator Brochure or Report of Prior Investigations
• Study protocol & amendments
• Investigator qualifications
• Informed consent documents, including subject
recruiting tools
• Other written information provided to subjects
• Subject compensation plans
• Adverse events
• Protocol deviations
28 March 2011 Department of Pharmaceutics 50
51. IRB/EC When Reviews Occur
• Prior to study initiation at site
• At least yearly during study
• During study, as necessitated by:
– Changes in protocol, consent documents, etc.
– Changes in study investigator
– Reports of serious or unanticipated device-related adverse
events
• At study completion or termination
28 March 2011 Department of Pharmaceutics 51
52. Investigator Roles &
Responsibilities
• Qualified to conduct study
• Have adequate resources to conduct study
• Provide medical care to study subjects
• Regular communication with IRB/EC reviewing study
• Compliance with study protocol
• Maintenance of investigational product accountability
• Compliance with study randomization & unmasking
procedures
• Provide informed consent to study subjects
28 March 2011 Department of Pharmaceutics 52
53. Investigator Responsibilities
Appropriate Qualifications
• Training & experience demonstrated via:
– Medical license
– CV
– Specialized study training
– GCP training
• If study responsibilities delegated, need a list of qualified
persons to whom responsibilities are delegated
28 March 2011 Department of Pharmaceutics 53
54. Investigator Responsibilities
Adequate Resources
• Suitable staff & good methods for keeping them apprised
• Suitable facilities
• Appropriate patient population
– Access to disease or condition
– Volume of patients with disease or condition
28 March 2011 Department of Pharmaceutics 54
55. Investigator Responsibilities
Required Records & Reports
• Essential regulatory document file(s)
– Protocol & amendments
– Approved informed consent documents
– Product accountability documentation
– Investigator qualifications & agreements
– IRB correspondence
– Study delegation list
– Subject screening/enrollment logs
– Study monitoring reports
– Calibration/maintenance logs
– Memos to file
28 March 2011 Department of Pharmaceutics 55
56. Sponsor
Roles & Responsibilities
• Study quality assurance
• Appropriately qualified medical personnel to advise on
study
• Utilization of qualified personnel in study design &
operations
• Study management, data handling & record keeping
• Investigator selection & training
• Definition/allocation of study responsibilities
28 March 2011 Department of Pharmaceutics 56
57. Sponsor
Roles & Responsibilities
• Facilitation of communications between Investigators
• Study compensation (investigators and/or subjects) &
financing
• Regulatory authority notification/submission
• Confirmation of IRB/EC review/approval
• Investigational product information
• Investigational product manufacturing, packaging,
labeling & coding
• Investigational product supply & handling28 March 2011 Department of Pharmaceutics 57
58. Sponsor
Roles & Responsibilities
• Record access
• Ongoing safety evaluation & reporting
• Serious/unanticipated adverse event reporting
• Study monitoring
• Study noncompliance procedures
• Study termination or suspension notification
• Study reports
28 March 2011 Department of Pharmaceutics 58
59. Sponsor
Roles & Responsibilities
• Sponsor may transfer responsibilities to CRO
– Transfer must be documented in writing
– Sponsor still has ultimate responsibility for study quality and
data integrity
28 March 2011 Department of Pharmaceutics 59
60. Study Protocol Components
• General administrative info
• Background
• Study purpose & objectives
• Study design
• Subject eligibility requirements
• How subjects will be treated
• How safety & efficacy will be assessed
• Sample size justification & statistical analysis methods
28 March 2011 Department of Pharmaceutics 60
61. Study Protocol Components
• How data will be captured & maintained
• Monitoring procedures
• Proposed informed consent document
28 March 2011 Department of Pharmaceutics 61
62. Informed Consent Document
Components
• Statement that study involves “research” & product
“experimental” (if applicable)
• Study purpose
• Number of expected study subjects to be enrolled
• Study treatment(s) & probability for random assignment
• Study exams & procedures for duration of trial
• Subject’s responsibilities
• Foreseeable risks to subject (embryo, fetus, nursing infant)
28 March 2011 Department of Pharmaceutics 62
63. Informed Consent Document
Components
• Expected benefits
• Alternatives procedures or therapies & associated
risk/benefit
• Compensation available in event of study-related injury
or sickness
• Anticipated payments to subject for study participation
• Anticipated expenses to subject for study participation
• Statement that participation is voluntary
28 March 2011 Department of Pharmaceutics 63
64. Informed Consent Document
Components
• Description of extent to which confidentiality can be
assured
• Commitment to keep subject apprised on new
information that may affect subject’s willingness to
participate in study
• Contact info for questions re: subject rights; trial-
related adverse events
• Circumstances under which subject’s participation
may be terminated
28 March 2011 Department of Pharmaceutics 64
65. Investigator Brochure
What It Is
A compilation of clinical & non-clinical data on the
product that is relevant to the product’s study in
humans
Necessary for Investigator & IRB/EC review to
assess the risks/benefits associated with study
28 March 2011 Department of Pharmaceutics 65
66. Investigator Brochure
Components
Product formulation summary
Introduction/background info regarding product &
investigational plan
• Investigational product physical, chemical &
pharmaceutical properties & formulation
• Non-clinical studies
• Human clinical studies
• Summary of data & guidance for Investigator
28 March 2011 Department of Pharmaceutics 66
67. Good Clinical Practice
Reference Documents & Links
• ICH - E6: Guideline for Good Clinical Practice
• 21 CFR 50 - Informed Consent
• 21 CFR 56 - Institutional Review Board
• http://www.ich.org/cache/compo/276-254-1.html
• http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/c
28 March 2011 Department of Pharmaceutics 67
68. GLP – (Good Laboratory Practice)
28 March 2011 Department of Pharmaceutics 68
69. What It Is GLP
• Describes good practices for non-clinical lab
studies that support research or marketing
approvals for FDA-regulated products
28 March 2011 Department of Pharmaceutics 69
70. GLP General Requirements
• Appropriately qualified personnel
• Adequate resources
• Appropriate procedures for:
– Sanitation, health precautions, clothing
– Test protocol development, test methods
– Data analysis, report development
• Appropriately qualified study director
• Quality assurance function
28 March 2011 Department of Pharmaceutics 70
71. GLP Facilities Requirements
• Suitable size, construction, segregation
– Animal care
– Animal supplies
– Test & control products maintained in a secure area
– Operating “suite”
– Specimen & data storage
28 March 2011 Department of Pharmaceutics 71
72. GLP Equipment Requirements
• Appropriately designed
• Adequate thru-put capacity
• Appropriately located
• Routinely maintained & calibrated
28 March 2011 Department of Pharmaceutics 72
73. GLP Standard Operating Procedures
• Animal room prep
• Animal care
• Receipt, ID, storage, handling, mixing & sampling of
test & control articles
• Test system observations
• Lab tests
• Handling of moribund or dead animals
• Necropsy or postmortem exams of animals
28 March 2011 Department of Pharmaceutics 73
74. GLP Standard Operating Procedures
• Collection & ID of specimens
• Histopathology
• Data handling, storage & retrieval
• Equipment maintenance & calibration
• Transfer, proper placement & ID of animals
28 March 2011 Department of Pharmaceutics 74
75. GLP Reagents & Solutions
• Adequate labeling
– Identity
– Concentration
– Storage requirements
– Expiration date
28 March 2011 Department of Pharmaceutics 75
76. GLP Test & Control Articles
• Adequate characterization
• Proper receipt, storage, distribution
• When mixed with a carrier, adequate methods to
confirm
– Mixture uniformity
– Article concentration
– Article stability
28 March 2011 Department of Pharmaceutics 76
77. GLP Study Implementation
• Written, approved protocol indicating test objectives
& methods
• Study conducted in accordance with protocol
• Study monitoring to confirm protocol compliance
• Appropriate labeling of specimens by test system,
study, nature & collection date
• Records of gross findings from postmortems
available to pathologist for specimen histopathology
28 March 2011 Department of Pharmaceutics 77
78. GLP Study Implementation
• Standard data capture/recording requirements
– Legibility
– Permanence
– Accountability
– Changes
28 March 2011 Department of Pharmaceutics 78
79. GLP Records & Reports
• Final report of results
• Study records & data methodically archived to
facilitate expedient retrieval
– Study documents
– Raw data
– Specimens
– Protocols
– QA inspections
– Personnel training & qualifications
– Calibration & maintenance records
28 March 2011 Department of Pharmaceutics 79
80. GLP Records & Reports
• Records retention (shortest of):
– ≥ 2 yr after FDA marketing clearance
– ≥ 5 yr after data submitted to FDA in support of marketing
application
– ≥ 2 yr after Sponsor decision not to proceed with
marketing application
– Wet specimens hold as long as viable
• Records transferable with written FDA notification
28 March 2011 Department of Pharmaceutics 80
81. GLP Facility Disqualification
• Grounds for disqualification:
– Failure to comply with regulations &
– Noncompliance adversely affects study validity &
– Previous regulatory actions have been unsuccessful in
modifying facility operations
28 March 2011 Department of Pharmaceutics 81
82. GSP – (Good Storage Practice)
28 March 2011 Department of Pharmaceutics 82
83. GSP – (Good Storage Practice)
1. Glossary
2. Personnel
3. Premises and facilities
4. Storage requirements
5. Returned goods
6. Dispatch and transport
7. Product recall
83Department of Pharmaceutics28 March 2011
84. 1. Glossary
a. Active pharmaceutical ingredient
b. Contamination
c. Cross-contamination
d. Excipient
e. Expiry date
f. Labelling
28 March 2011 Department of Pharmaceutics 84
85. 1. Glossary
g. Packaging material
h. Pharmaceutical product
i. Production
j. Retest date
k. Storage
l. Supplier
28 March 2011 Department of Pharmaceutics 85
86. 2. Personnel
• At each storage site (e.g. that of a manufacturer, distributor,
wholesaler, community or hospital pharmacy) there should
be an adequate number of qualified personnel to achieve
pharmaceutical quality assurance objectives.
• National regulations on qualifications should be followed.
28 March 2011 Department of Pharmaceutics 86
87. 2. Personnel
• All personnel should receive proper training in relation to
good storage practice, regulations, procedures and safety.
• All members of staff should be trained in, and observe high
levels of, personal hygiene and sanitation.
• Personnel employed in storage areas should wear suitable
protective or working garments appropriate for the activities
they perform
28 March 2011 Department of Pharmaceutics 87
88. 3. Premises and facilities
a. Storage areas
b. Storage conditions
c. Monitoring of storage conditions
28 March 2011 Department of Pharmaceutics 88
89. 4. Storage requirements
a. Documentation: written instructions and records
b. Labeling and containers
c. Receipt of incoming materials and pharmaceutical
products
d. Stock rotation and control
28 March 2011 Department of Pharmaceutics 89
90. 5. Returned goods
• Returned goods, including recalled goods, should be
handled in accordance with approved procedures and
records should be maintained.
• All returned goods should be placed in quarantine and
returned to saleable stock only after this has been
approved by a nominated, responsible person following a
satisfactory quality re-evaluation.
• Any stock reissued should be so identified and recorded in
stock records. Pharmaceuticals returned from patients to
the pharmacy should not be taken back as stock, but
should be destroyed.
28 March 2011 Department of Pharmaceutics 90
91. 6. Dispatch and transport
• Records for dispatch should be retained, stating at least:
— the date of dispatch;
— the customer’s name and address;
— the product description, e.g. name, dosage form and
strength (if appropriate), batch number and quantify;
— the transport and storage conditions.
• All records should be readily accessible and available on
request.
28 March 2011 Department of Pharmaceutics 91
92. 7. Product recall
• There should be a procedure to recall from the
market, promptly and effectively, pharmaceutical
products and materials known or suspected to be
defective.
28 March 2011 Department of Pharmaceutics 92
93. GDP – (Good Distribution practice)
28 March 2011 Department of Pharmaceutics 93
94. GDP – (Good Distribution practice)
• GDP governs the proper distribution of medicinal
products for human use and regulates the
movement of products from the manufacturers’
premises (or other central point) to the end user (or
other intermediate point).
94Department of Pharmaceutics28 March 2011
95. GDP – (Good Distribution practice)
1. Principle
2. Personnel
3. Documentation
4. Premises and equipment
5. Deliveries to customers
6. Returns
7. Self inspection
8. Provision of information to Member States in relation
to wholesale activities
28 March 2011 Department of Pharmaceutics 95
96. 1. Principle
• Policy ensures that products released for distribution are of
the appropriate quality.
• In addition to this, the quality system should ensure that the
right products are delivered to the right addressee within a
satisfactory time period.
• A tracing system should enable any faulty product to be
found and there should be an effective recall procedure.
28 March 2011 Department of Pharmaceutics 96
97. 2. Personnel
• He should fulfil his responsibilities personally.
• Person should be appropriately qualified: although a degree
in Pharmacy is desirable, the qualification requirements
may be established by the Member State on whose territory
the wholesaler is located.
28 March 2011 Department of Pharmaceutics 97
98. 2. Personnel
• Key personnel involved in the warehousing of
medicinal products should have the appropriate
ability and experience to guarantee that the
products or materials are properly stored and
handled.
• Personnel should be trained in relation to the duties
assigned to them and the training sessions
recorded.
28 March 2011 Department of Pharmaceutics 98
99. 3. Documentation
• All documentation should be made available on
request of competent authorities
a. Orders
b. Procedures
c. Records
28 March 2011 Department of Pharmaceutics 99
100. 4. Premises and equipment
• Premises and equipment should be suitable and
adequate to ensure proper conservation and
distribution of medicinal products.
a. Receipt
b. Storage
28 March 2011 Department of Pharmaceutics 100
101. 5. Deliveries to customers
• Deliveries should be made only to other authorised
wholesalers or to persons authorised to supply medicinal
products to the public in the Member State concerned.
• In case of emergency, wholesalers should be in a position
to supply immediately the medicinal products that they
regularly supply to the persons entitled to supply the
products to the public.
28 March 2011 Department of Pharmaceutics 101
102. 5. Deliveries to customers
• Medicinal products should be transported in such a way
that :
a) Their identification is not lost;
b) They do not contaminate, and are not contaminated by,
other products or materials;
c) Adequate precautions are taken against spillage,
breakage or theft;
d) They are secure and not subjected to unacceptable
degrees of heat, cold, light, moisture or other adverse
influence, nor to attack by microorganisms or pests.
28 March 2011 Department of Pharmaceutics 102
103. 6. Returns
a. Returns of non-defective medicinal products
b. Emergency plan and recalls
c. Counterfeit medicinal products
d. Special provisions concerning products classified
as not for sale
28 March 2011 Department of Pharmaceutics 103
104. 7. Self inspection
• Self-inspections should be conducted 9and
recorded) in order to monitor the
implementation of and compliance with this
guideline.
28 March 2011 Department of Pharmaceutics 104
105. 8. Provision of information to Member
States in relation to wholesale activities
• Wholesalers wishing to distribute or distributing medicinal
products in Member State(s).
• Where appropriate, the competent authorities of this (these)
other Member State(s) will inform the wholesaler of any
public service obligation imposed on wholesalers operating
on their territory.
28 March 2011 Department of Pharmaceutics 105
106. Guidance documents deal with GDP
• WHO Good Distribution Practice, Annex 5 to Technical Report
Series, No. 937, 2006
• Health Canada Guidelines for Temperature Control of Drug
Products during Storage and Transportation, 2005
• Irish Medicines Board Guide to Control and Monitoring of Storage
and Transportation Temperature Conditions for Medicinal Products
and Active Substances, 2006
• USP chapter <1079> Good Storage and Shipping Practice
• EU Guidelines on Good Distribution Practice of Medicinal Products
for Human Use (94/C 63/03)
106Department of Pharmaceutics28 March 2011
107. GRP – (Good Review Practice)
28 March 2011 Department of Pharmaceutics 107
108. GRP – (Good Review Practice)
• A good review practice (GRP) is a documented best
practice within CDER that discusses any aspect related to
the process, format, content, and/or management of a
product review.
• GRPs are developed over time as superior practices based
on CDER’s collective experience to provide consistency to
the overall review process of new products.
• GRPs are developed to improve the quality of reviews and
review management.
28 March 2011 Department of Pharmaceutics 108
109. GRP – (Good Review Practice)
• GRPs improve efficiency, clarity, and transparency of the
review process and review management.
• GRPs are expected to be adopted by review staff as
standard processes through supervisor mentoring,
implementation teams, and formal training when necessary.
• Developing GRPs is an attempt to identify, collect,
enhance, implement, and adopt may of these best practices
as documented and standardized GRPs that can be shared
among all review division
28 March 2011 Department of Pharmaceutics 109
110. − Quality — Consistent implementation of GRPs by review
staff will enhance the quality of reviews, the review process,
and the resultant regulatory action.
− Efficiency — GRPs will improve the efficiency of the review
process through standardization.
− Clarity — GRPs support clarity throughout the review
process, including critical review and decision activities that
must be completed before a regulatory decision is made.
28 March 2011 Department of Pharmaceutics 110
GRPs Fundamental Values
111. GRPs Fundamental Values
− Transparency — Developing and documenting GRPs
ensures that our review processes are readily available in
one location via the Internet (through CDER’s Web site) to
sponsors and the public.
− Consistency — By offering a consistent approach and only
deviating from it when appropriate (after supervisory
concurrence), GRPs help reviewers achieve consistency
with their reviews and provide standard review processes
across divisions and offices.
28 March 2011 Department of Pharmaceutics 111
113. cGxP
• A "c" or "C" is sometimes added to the front of the acroynm.
• The preceding "c" stands for "current."
• For example, cGMP is an acronym for "current Good
Manufacturing Practices." cGMP is the most well known
example of a GxP.
• The term GxP is only used in a casual manner, to refer in a
general way to a collection of quality guidelines.
113Department of Pharmaceutics28 March 2011
114. cGxP
• What does cGxP stand for?
• Current Good X Practice (FDA compliance; X can
mean: Manufacturing, Clinical, Laboratory, Storage,
Distribution, Review Pharmaceutical)
114Department of Pharmaceutics28 March 2011
115. 28 March 2011 Department of Pharmaceutics 115
Thank you
Cell No: 00919742431000
E-mail: bknanjwade@yahoo.co.in