GSM Based e-Notice Board
•Download as PPTX, PDF•
5 likes•2,014 views
The main aim of this project is to design an SMS driven automatic display notice board which can replace the currently used programmable electronic display. The message to be displayed is sent through a SMS from an authorized sender. The GSM receives the SMS, verifies the sender’s mobile identification pin(MIP) and displays the desired information on LCD.
Report
Share
Report
Share
Recommended
Wireless Electronic Notice Board
This document contains multiple project reports for a wireless electronic notice board developed by students at the Government Polytechnic College in Neyyattinkara, India. The notice board allows text messages to be sent via GSM from any location and displayed on the board. It uses an ATmega32 microcontroller interfaced with a GSM module, LCD display, power supply and other components. The system validates incoming SMS messages and displays them. The reports describe the design, circuit diagrams, programming, and working of the notice board system.
wireless electronics notice board using GSM
The objective of this project is ‘We know the importance of notice boards in public places like railway stations and bus stations. But changing notices day-to-day,time to time is a difficult task. so explains how to design a wireless electronic notice board using GSM technology.
Iot based digital notice board with arduino
Iot Based Digital notice board with aurdino
In this project the GSM technology is replaced with the WI-FI module
wireless electronic notice board using GSM
This project implements a wireless electronic notice board using GSM technology. A microcontroller receives SMS messages from a mobile phone via a GSM modem. It then displays the messages on an LCD screen. The system was designed, built and tested. It provides a low-cost, flexible way to remotely display messages and could be useful for applications like advertising, education and information sharing. Potential enhancements include displaying multiple messages simultaneously and adding priority levels to messages.
IoT based Smart board for Displaying and Forwarding notices using Raspberry Pi
This system reduces the usage of paper by replacing the conventional notice board into a digital notice board. The user can send notices either by SMS or Web application to the GSM and it the display the notice in LCD monitor. And the displayed notices get forwarded to authorized user's mobile number through GSM. Authentication is achieved through password. Raspberry Pi 3 controls the overall process. Through this system the user can send the notices from anywhere with in a fraction of second.
gsm based Notice board
This document describes a GSM-based wireless notice board system. It uses a SIM900 GSM modem connected to an LPC2148 microcontroller via a MAX232 level shifter. The system allows users to send SMS messages containing notices to the SIM card, which are then displayed on an LED display board. It provides a low-cost wireless alternative to physical notice boards that avoids issues like unauthorized access or frequent updates. Potential applications include notice boards for schools, traffic control, and information displays in public areas.
E- Notice Board Presentation
Wireless Electronic Notice Board Using Voice Recognition.With the advent of advance technology nowadays, the wireless communication is proving its importance in each and every field of today’s era. This system deals with use of one such wireless technology. The proposed system is a combination of hardware as well as software. The main idea of the project is to develop an electronic notice board which will display the content entered by user’s voice in his mobile phone. This in turn will reduce the paper consumptions and wastage of time involved in conventional notice board.
In speech controlled electronic notice board is very friendly to user and can operate merely from a distance of 10 meters(approx). Here, installed application operates on Voice recognition concept which will be embedded in a microcontroller interfaced with Bluetooth device. Bluetooth wireless technology helps in communication area, and is the fastest growing fields within the wireless technologies.
wireless E notice board
Notice Board is primary thing in any institution or organization or public utility places like bus stations, railway stations and parks. But sticking various notices day-to-day is a difficult process.
Recommended
Wireless Electronic Notice Board
This document contains multiple project reports for a wireless electronic notice board developed by students at the Government Polytechnic College in Neyyattinkara, India. The notice board allows text messages to be sent via GSM from any location and displayed on the board. It uses an ATmega32 microcontroller interfaced with a GSM module, LCD display, power supply and other components. The system validates incoming SMS messages and displays them. The reports describe the design, circuit diagrams, programming, and working of the notice board system.
wireless electronics notice board using GSM
The objective of this project is ‘We know the importance of notice boards in public places like railway stations and bus stations. But changing notices day-to-day,time to time is a difficult task. so explains how to design a wireless electronic notice board using GSM technology.
Iot based digital notice board with arduino
Iot Based Digital notice board with aurdino
In this project the GSM technology is replaced with the WI-FI module
wireless electronic notice board using GSM
This project implements a wireless electronic notice board using GSM technology. A microcontroller receives SMS messages from a mobile phone via a GSM modem. It then displays the messages on an LCD screen. The system was designed, built and tested. It provides a low-cost, flexible way to remotely display messages and could be useful for applications like advertising, education and information sharing. Potential enhancements include displaying multiple messages simultaneously and adding priority levels to messages.
IoT based Smart board for Displaying and Forwarding notices using Raspberry Pi
This system reduces the usage of paper by replacing the conventional notice board into a digital notice board. The user can send notices either by SMS or Web application to the GSM and it the display the notice in LCD monitor. And the displayed notices get forwarded to authorized user's mobile number through GSM. Authentication is achieved through password. Raspberry Pi 3 controls the overall process. Through this system the user can send the notices from anywhere with in a fraction of second.
gsm based Notice board
This document describes a GSM-based wireless notice board system. It uses a SIM900 GSM modem connected to an LPC2148 microcontroller via a MAX232 level shifter. The system allows users to send SMS messages containing notices to the SIM card, which are then displayed on an LED display board. It provides a low-cost wireless alternative to physical notice boards that avoids issues like unauthorized access or frequent updates. Potential applications include notice boards for schools, traffic control, and information displays in public areas.
E- Notice Board Presentation
Wireless Electronic Notice Board Using Voice Recognition.With the advent of advance technology nowadays, the wireless communication is proving its importance in each and every field of today’s era. This system deals with use of one such wireless technology. The proposed system is a combination of hardware as well as software. The main idea of the project is to develop an electronic notice board which will display the content entered by user’s voice in his mobile phone. This in turn will reduce the paper consumptions and wastage of time involved in conventional notice board.
In speech controlled electronic notice board is very friendly to user and can operate merely from a distance of 10 meters(approx). Here, installed application operates on Voice recognition concept which will be embedded in a microcontroller interfaced with Bluetooth device. Bluetooth wireless technology helps in communication area, and is the fastest growing fields within the wireless technologies.
wireless E notice board
Notice Board is primary thing in any institution or organization or public utility places like bus stations, railway stations and parks. But sticking various notices day-to-day is a difficult process.
Wireless Electronic Notice Board using GSM Technology
Wireless Electronic Notice Board using GSM Technology
A final year BE project at Kathford International College
,Latitpu, Nepal
Digital Notice Board
This document describes a multi-notice display board system using GSM technology. It is summarized as follows:
The system allows wireless control of multiple notice boards using an AT89S52 microcontroller and GSM modem. Notices can be sent individually to boards A and B or to both boards simultaneously. The microcontroller interfaces with a 20x4 LCD display on each board to show messages. The system provides a low-cost and low-power way to remotely manage multiple display boards for places like colleges, hospitals, and stations.
Main project report on GSM BASED WIRELESS NOTICE BOARD
This document is the main project report submitted by four students for their Bachelor of Technology degree in Electronics and Communication Engineering. It describes the development of a GSM based wireless notice board system. The system allows users to update scrolling messages on an LED display board remotely by sending SMS text messages. It aims to provide a more flexible alternative to traditional fixed notice boards by enabling instantaneous message updates from anywhere via the mobile phone SMS service. The report includes chapters on the hardware components, software requirements, schematic diagram, program code, advantages and applications of the project.
Satellite telemetry tracking command and monitoring subsystem & Electronic an...
The document summarizes the key functions of the telemetry, tracking and command (TT&C) subsystem of a satellite. It discusses how TT&C provides vital communication between the satellite and ground stations by (1) monitoring the satellite's status and measurements through telemetry, (2) sending commands from the ground to control satellite functions, and (3) tracking the satellite's location through antenna positioning and Doppler effect measurements. The TT&C subsystem receives commands from and provides data to the satellite's command and data handling system and performs autonomous operations like antenna pointing and fault recovery.
Vehicle tracking system using gps and gsm
This project is about tracking system that tracks vehicle using gps and gsm/gprs. Also, it displays information for user interface using web and mobile application.Beside that it displays information on lcd as a form of public notice board too.
Wireless Weather Station monitoring System
This document summarizes a project to design a wireless weather monitoring system using GSM. The system monitors parameters like humidity, rainfall, temperature, and light intensity using sensors connected to a PIC16F877A microcontroller. The microcontroller converts analog sensor data to digital and monitors for abnormal readings. When abnormalities occur, a caution message is sent via GSM modem to programmed mobile numbers. Users can also request current data by sending an SMS. The system provides remote weather monitoring via the GSM network. It has applications in agriculture, industry, and medicine. The document outlines the hardware used including sensors, microcontroller, GSM modem, LCD display, and power supply.
Project smart notice board ppt
Now a day’s every advertisement is going to be digital. The big shops and shopping centers are using the digital moving displays now. The MOVING MESSAGE DISPLAY is use in school, college campus, universities, hospital and industries to scroll different events and important notices.
The aim of this project is to develop a wireless notice board that will be used at the faculty in order to display latest information.So we are designing a new display system which can access remotely, we are using the Wi-Fi technology, if the user wants to display some message, they will send the messages from mobile (i.e. wireless) or from their PC , the module (Wi-Fi router) in the display system will receive the message and update the display according to the message.
Automatic gas detection system
This document describes a gas leakage detection and alert system using an Arduino board. The system uses an LPG gas sensor to detect gas leaks and triggers an alarm with lights and sounds. If a leak is detected, it will also send an alert via Bluetooth. It is designed for home safety to prevent accidents from gas leaks in the kitchen. When fully built, the system will help prevent accidents and can be enhanced for industrial use.
wireless notice board
This document outlines the development of a wireless notice board system. The system aims to allow users to send messages from a website or mobile app that will be displayed on an electronic notice board. The notice board will receive messages via a GSM modem connected to a microcontroller. The document describes the problem, software requirements like an Android app for sending messages, hardware requirements including an Android device, and database design. It provides an overview of the existing manual system and proposed wireless system, and constraints for the software and databases.
Vehicle accident detection system (VAD)
The main objective of our project is to provide an optimum solution to the traffic hazards and the road accidents. According to this project when a vehicle meets with an accident, immediately vibration sensor will detect the signal and sends it to ARM controller. Microcontroller sends the alert message through the GSM MODEM including the location to police control room or a rescue team. So the police can immediately trace the location through the GPS MODEM after receiving the information.
PROJECT REPORT ON Home automation using by Bluetooth
This document summarizes a student project on developing a home automation system using an Arduino board and Bluetooth. The system allows users to control electrical appliances like fans and lights in their home remotely using an Android phone app. The app communicates with an Arduino Uno microcontroller via HC-05 Bluetooth module. The Arduino is connected to a 4-channel relay board to switch appliances on and off. The project aims to provide a low-cost solution for remote home control without needing physical switches or remote controls.
Women safety device with gps tracking and alerts
This document describes a women's safety device project that uses GPS tracking and alerts. The system uses an Arduino Uno microcontroller connected to a GPS module, GSM module, fingerprint scanner and other components. It allows a woman in distress to activate alerts by fingerprint or button press, which then sends her location via SMS to predefined numbers. The system provides dual security by tracking a woman's location even if she cannot press the panic button. It is designed for safety but has limitations like size, battery dependence and need for SIM card. Potential applications include child tracking and vehicle integration for increased safety.
soldier tracking and health monitoring system
This document describes a project to track soldiers and monitor their health status during war using sensors, GPS, and GSM. The system includes sensors to monitor a soldier's pulse rate and temperature, along with a GPS module to track location. If the soldier's pulse drops below 60 or their coordinates exceed a certain range, the system will automatically make an emergency call through the GSM module to alert others. The goal is to allow army personnel to plan strategies based on real-time soldier location and health data. The system uses an ARM7 microcontroller to process data from the sensors and GPS and communicate through GSM when needed.
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
This document describes a vehicle accident detection and tracking system using GPS, GSM, and MEMS sensors. The system detects accidents using a MEMS sensor and then uses GPS to determine the vehicle's location. The location is sent via GSM to emergency services and authorized contacts to provide rapid response. The system aims to quickly locate accident sites and notify help in remote areas with limited communication infrastructure.
Gas Leakage Detection Based on IOT
Gas Leakage Detection Based on IOT
Cloud Technologies providing Complete Solution for all
Academic Projects Final Year/Semester Student Projects
For More Details,
Contact:
Mobile:- +91 8121953811,
whatsapp:- +91 8522991105,
Email ID: cloudtechnologiesprojects@gmail.com
Arduino based electronic notice board and controlling of home appliances by u...
ABSTRACT:Notice boards plays a major role in Educational institutions or any organisations or bus stations and railway stations the information can be shared by means of messages. But sending various messages at a time becomes tedious process by using paper notices . In order to overcome the difficulties we are introducing SMS based notice board . This paper deals with the SMS based notice board incorporating widely used GSM SIM900 for displaying messages via user’s mobile . The main idea behind this paper is to provide the simple and flexible way for the user to display notices on the LED display through messages by using GSM SIM900. This GSM SIM 900 module will be used anywhere irrespective of the place where the network connectivity will be available. In this paper we are not only dealing with the SMS based notice board but also with the home appliances control with the help of ATmega 328 controller . With the help of this controller we are controlling home appliances like Fan and light with the help of the messages sent to GSM SIM900. The GSM SIM900 will receive the commands what we sent from the mobile and operation will perform accordingly.
Keywords: ATmega 328 controller , GSM SIM900 LED Display , Mobile
Gas Leakage Detector using Arduino with SMS Alert - Engineering Project
Gas Leakage Detector using Arduino and MQ5 Gas Sensor - with GSM Module for SMS Alerts and Sound Alarm - Ideal for Engineering Project and Seminar Presentation - Read Full Article here - http://www.circuitstoday.com/gas-leakage-detector-using-arduino-with-sms-alert -
Vehicle Tracking and Locking System
This project presents a vehicle tracking system that uses a GPS module and GSM modem to track vehicle location via text messages. The system includes a microcontroller that receives location coordinates from the GPS module and sends this information via SMS to authorized users. It provides real-time vehicle tracking and can send alerts in emergencies. Potential applications include fleet management, theft protection, and monitoring school buses or rental vehicles. The presentation outlines the key components, working principle, and a demonstration of tracking a vehicle location on an online map using longitude and latitude coordinates from an SMS.
Massive mimo
The document discusses massive MIMO technology. It defines massive MIMO as using a very large number of antennas at base stations to serve many users simultaneously. Key benefits include high spectral and energy efficiency. It explains that massive MIMO differs from conventional MU-MIMO by benefiting greatly from excess antennas. The document also covers topics like TDD vs FDD operation, pilot contamination issues and potential mitigation techniques, and synergies with mmWave networks.
MASER & Parametric Amplifier in Microwave Engineering(B.Tech,ECE)
Hand written notes on MASER & Parametric Amplifier in Microwave Engineering for final year B.Tech students ECE Branch
GSM BASED e-NOTICE BOARD final year project report
This document describes a project report for a GSM based e-notice board. It includes an introduction that provides an overview of the project, describing information transfer and system components. It also includes sections on literature survey, problem definition, system requirements specification, system modelling and design, implementation, testing, and conclusion. The project involved interfacing a GSM modem, LCD display, and microcontroller to allow notices to be sent via SMS and displayed on the board. It was implemented at the institute level as a proposal.
Project report on gsm based digital notice board
The project involves using a GSM network to transmit text data and display it on an LCD screen. A microcontroller processes the data on both ends and only displays it after a unique passcode is entered. It allows data to be received and displayed globally from any location as long as the correct passcode is provided. The system uses a microcontroller, GSM modem, and display board integrated together. The GSM modem receives SMS messages and the microcontroller validates them before displaying on the LCD screen. Various time division techniques allow for efficient display. An 8051 microcontroller and Motorola GSM modem are used in the prototype model.
More Related Content
What's hot
Wireless Electronic Notice Board using GSM Technology
Wireless Electronic Notice Board using GSM Technology
A final year BE project at Kathford International College
,Latitpu, Nepal
Digital Notice Board
This document describes a multi-notice display board system using GSM technology. It is summarized as follows:
The system allows wireless control of multiple notice boards using an AT89S52 microcontroller and GSM modem. Notices can be sent individually to boards A and B or to both boards simultaneously. The microcontroller interfaces with a 20x4 LCD display on each board to show messages. The system provides a low-cost and low-power way to remotely manage multiple display boards for places like colleges, hospitals, and stations.
Main project report on GSM BASED WIRELESS NOTICE BOARD
This document is the main project report submitted by four students for their Bachelor of Technology degree in Electronics and Communication Engineering. It describes the development of a GSM based wireless notice board system. The system allows users to update scrolling messages on an LED display board remotely by sending SMS text messages. It aims to provide a more flexible alternative to traditional fixed notice boards by enabling instantaneous message updates from anywhere via the mobile phone SMS service. The report includes chapters on the hardware components, software requirements, schematic diagram, program code, advantages and applications of the project.
Satellite telemetry tracking command and monitoring subsystem & Electronic an...
The document summarizes the key functions of the telemetry, tracking and command (TT&C) subsystem of a satellite. It discusses how TT&C provides vital communication between the satellite and ground stations by (1) monitoring the satellite's status and measurements through telemetry, (2) sending commands from the ground to control satellite functions, and (3) tracking the satellite's location through antenna positioning and Doppler effect measurements. The TT&C subsystem receives commands from and provides data to the satellite's command and data handling system and performs autonomous operations like antenna pointing and fault recovery.
Vehicle tracking system using gps and gsm
This project is about tracking system that tracks vehicle using gps and gsm/gprs. Also, it displays information for user interface using web and mobile application.Beside that it displays information on lcd as a form of public notice board too.
Wireless Weather Station monitoring System
This document summarizes a project to design a wireless weather monitoring system using GSM. The system monitors parameters like humidity, rainfall, temperature, and light intensity using sensors connected to a PIC16F877A microcontroller. The microcontroller converts analog sensor data to digital and monitors for abnormal readings. When abnormalities occur, a caution message is sent via GSM modem to programmed mobile numbers. Users can also request current data by sending an SMS. The system provides remote weather monitoring via the GSM network. It has applications in agriculture, industry, and medicine. The document outlines the hardware used including sensors, microcontroller, GSM modem, LCD display, and power supply.
Project smart notice board ppt
Now a day’s every advertisement is going to be digital. The big shops and shopping centers are using the digital moving displays now. The MOVING MESSAGE DISPLAY is use in school, college campus, universities, hospital and industries to scroll different events and important notices.
The aim of this project is to develop a wireless notice board that will be used at the faculty in order to display latest information.So we are designing a new display system which can access remotely, we are using the Wi-Fi technology, if the user wants to display some message, they will send the messages from mobile (i.e. wireless) or from their PC , the module (Wi-Fi router) in the display system will receive the message and update the display according to the message.
Automatic gas detection system
This document describes a gas leakage detection and alert system using an Arduino board. The system uses an LPG gas sensor to detect gas leaks and triggers an alarm with lights and sounds. If a leak is detected, it will also send an alert via Bluetooth. It is designed for home safety to prevent accidents from gas leaks in the kitchen. When fully built, the system will help prevent accidents and can be enhanced for industrial use.
wireless notice board
This document outlines the development of a wireless notice board system. The system aims to allow users to send messages from a website or mobile app that will be displayed on an electronic notice board. The notice board will receive messages via a GSM modem connected to a microcontroller. The document describes the problem, software requirements like an Android app for sending messages, hardware requirements including an Android device, and database design. It provides an overview of the existing manual system and proposed wireless system, and constraints for the software and databases.
Vehicle accident detection system (VAD)
The main objective of our project is to provide an optimum solution to the traffic hazards and the road accidents. According to this project when a vehicle meets with an accident, immediately vibration sensor will detect the signal and sends it to ARM controller. Microcontroller sends the alert message through the GSM MODEM including the location to police control room or a rescue team. So the police can immediately trace the location through the GPS MODEM after receiving the information.
PROJECT REPORT ON Home automation using by Bluetooth
This document summarizes a student project on developing a home automation system using an Arduino board and Bluetooth. The system allows users to control electrical appliances like fans and lights in their home remotely using an Android phone app. The app communicates with an Arduino Uno microcontroller via HC-05 Bluetooth module. The Arduino is connected to a 4-channel relay board to switch appliances on and off. The project aims to provide a low-cost solution for remote home control without needing physical switches or remote controls.
Women safety device with gps tracking and alerts
This document describes a women's safety device project that uses GPS tracking and alerts. The system uses an Arduino Uno microcontroller connected to a GPS module, GSM module, fingerprint scanner and other components. It allows a woman in distress to activate alerts by fingerprint or button press, which then sends her location via SMS to predefined numbers. The system provides dual security by tracking a woman's location even if she cannot press the panic button. It is designed for safety but has limitations like size, battery dependence and need for SIM card. Potential applications include child tracking and vehicle integration for increased safety.
soldier tracking and health monitoring system
This document describes a project to track soldiers and monitor their health status during war using sensors, GPS, and GSM. The system includes sensors to monitor a soldier's pulse rate and temperature, along with a GPS module to track location. If the soldier's pulse drops below 60 or their coordinates exceed a certain range, the system will automatically make an emergency call through the GSM module to alert others. The goal is to allow army personnel to plan strategies based on real-time soldier location and health data. The system uses an ARM7 microcontroller to process data from the sensors and GPS and communicate through GSM when needed.
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
This document describes a vehicle accident detection and tracking system using GPS, GSM, and MEMS sensors. The system detects accidents using a MEMS sensor and then uses GPS to determine the vehicle's location. The location is sent via GSM to emergency services and authorized contacts to provide rapid response. The system aims to quickly locate accident sites and notify help in remote areas with limited communication infrastructure.
Gas Leakage Detection Based on IOT
Gas Leakage Detection Based on IOT
Cloud Technologies providing Complete Solution for all
Academic Projects Final Year/Semester Student Projects
For More Details,
Contact:
Mobile:- +91 8121953811,
whatsapp:- +91 8522991105,
Email ID: cloudtechnologiesprojects@gmail.com
Arduino based electronic notice board and controlling of home appliances by u...
ABSTRACT:Notice boards plays a major role in Educational institutions or any organisations or bus stations and railway stations the information can be shared by means of messages. But sending various messages at a time becomes tedious process by using paper notices . In order to overcome the difficulties we are introducing SMS based notice board . This paper deals with the SMS based notice board incorporating widely used GSM SIM900 for displaying messages via user’s mobile . The main idea behind this paper is to provide the simple and flexible way for the user to display notices on the LED display through messages by using GSM SIM900. This GSM SIM 900 module will be used anywhere irrespective of the place where the network connectivity will be available. In this paper we are not only dealing with the SMS based notice board but also with the home appliances control with the help of ATmega 328 controller . With the help of this controller we are controlling home appliances like Fan and light with the help of the messages sent to GSM SIM900. The GSM SIM900 will receive the commands what we sent from the mobile and operation will perform accordingly.
Keywords: ATmega 328 controller , GSM SIM900 LED Display , Mobile
Gas Leakage Detector using Arduino with SMS Alert - Engineering Project
Gas Leakage Detector using Arduino and MQ5 Gas Sensor - with GSM Module for SMS Alerts and Sound Alarm - Ideal for Engineering Project and Seminar Presentation - Read Full Article here - http://www.circuitstoday.com/gas-leakage-detector-using-arduino-with-sms-alert -
Vehicle Tracking and Locking System
This project presents a vehicle tracking system that uses a GPS module and GSM modem to track vehicle location via text messages. The system includes a microcontroller that receives location coordinates from the GPS module and sends this information via SMS to authorized users. It provides real-time vehicle tracking and can send alerts in emergencies. Potential applications include fleet management, theft protection, and monitoring school buses or rental vehicles. The presentation outlines the key components, working principle, and a demonstration of tracking a vehicle location on an online map using longitude and latitude coordinates from an SMS.
Massive mimo
The document discusses massive MIMO technology. It defines massive MIMO as using a very large number of antennas at base stations to serve many users simultaneously. Key benefits include high spectral and energy efficiency. It explains that massive MIMO differs from conventional MU-MIMO by benefiting greatly from excess antennas. The document also covers topics like TDD vs FDD operation, pilot contamination issues and potential mitigation techniques, and synergies with mmWave networks.
MASER & Parametric Amplifier in Microwave Engineering(B.Tech,ECE)
Hand written notes on MASER & Parametric Amplifier in Microwave Engineering for final year B.Tech students ECE Branch
What's hot (20)
Wireless Electronic Notice Board using GSM Technology
Wireless Electronic Notice Board using GSM Technology
Main project report on GSM BASED WIRELESS NOTICE BOARD
Main project report on GSM BASED WIRELESS NOTICE BOARD
Satellite telemetry tracking command and monitoring subsystem & Electronic an...
Satellite telemetry tracking command and monitoring subsystem & Electronic an...
PROJECT REPORT ON Home automation using by Bluetooth
PROJECT REPORT ON Home automation using by Bluetooth
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
ACCIDENT DETECTION AND VEHICLE TRACKING USING GPS,GSM AND MEMS
Arduino based electronic notice board and controlling of home appliances by u...
Arduino based electronic notice board and controlling of home appliances by u...
Gas Leakage Detector using Arduino with SMS Alert - Engineering Project
Gas Leakage Detector using Arduino with SMS Alert - Engineering Project
MASER & Parametric Amplifier in Microwave Engineering(B.Tech,ECE)
MASER & Parametric Amplifier in Microwave Engineering(B.Tech,ECE)
Viewers also liked
GSM BASED e-NOTICE BOARD final year project report
This document describes a project report for a GSM based e-notice board. It includes an introduction that provides an overview of the project, describing information transfer and system components. It also includes sections on literature survey, problem definition, system requirements specification, system modelling and design, implementation, testing, and conclusion. The project involved interfacing a GSM modem, LCD display, and microcontroller to allow notices to be sent via SMS and displayed on the board. It was implemented at the institute level as a proposal.
Project report on gsm based digital notice board
The project involves using a GSM network to transmit text data and display it on an LCD screen. A microcontroller processes the data on both ends and only displays it after a unique passcode is entered. It allows data to be received and displayed globally from any location as long as the correct passcode is provided. The system uses a microcontroller, GSM modem, and display board integrated together. The GSM modem receives SMS messages and the microcontroller validates them before displaying on the LCD screen. Various time division techniques allow for efficient display. An 8051 microcontroller and Motorola GSM modem are used in the prototype model.
Gsm based lcd notice board display
This document describes an SMS-based notice board display system that uses a GSM modem to receive messages and display them on an LCD screen. An 8051 microcontroller is interfaced with a GSM modem and LCD display to fetch messages from the modem and display them. When a user sends an SMS message to the SIM card in the GSM modem, the microcontroller receives the message through AT commands and displays it on the attached 16x2 LCD screen. Block diagrams, component descriptions, and the circuit diagram are provided to explain the system design and functionality.
Smart LED Notice Board
This document describes an SMS-based wireless notice board project using a microcontroller and GSM modem. The system allows notices to be displayed on an LED matrix board remotely via SMS messages sent to the GSM modem. The microcontroller receives SMS texts with the GSM modem and MAX232 interface and displays the messages on the LED board. The project uses components like a 89S52 microcontroller, SIM300 GSM modem, 74138 and 74154 decoder ICs, and a 24C02 EEPROM for message storage.
Gsm based wireless notice board Rajneesh
The document contains detailed description for displaying a Message on LED Notice board through SMS service Wirelessly, if facing any problem you can mail me at rajneeshkumarsalgotra@gmail.com with Subject GSM Wireless Notice Board Report_Your Name
Multiuser sms based microcontroller wireless electronic board
This document describes a wireless SMS-based microcontroller system for displaying electronic notices. The system uses an AT89C52 microcontroller interfaced with a GSM modem via a MAX232 level converter. The microcontroller is programmed using Embedded C and interfaces with a PC using Visual Basic. Messages entered on the PC are sent via GSM and displayed on a 16x2 LCD screen. The system provides a wireless solution to remotely update notices with low errors and maintenance.
Gsm message display
This document describes a GSM based notice board project that uses an AT89S52 microcontroller to receive SMS messages from a user's mobile phone via a GSM modem. The messages are then displayed on a 16x2 LCD display. The GSM modem is initialized and checks for connectivity. When a user sends an SMS, its contents are displayed on the LCD screen using the microcontroller and MAX232 interface, which converts logic levels. The hardware components, specifications, pin descriptions, block diagram, software tools, and advantages are also summarized.
Wireless electronic notice board using gsm technolgy
This document discusses the design of a wireless electronic notice board using GSM technology. It begins with introductions to GSM and embedded systems. It then shows the block diagram of the notice board, which includes a GSM modem connected to a microcontroller that controls an LCD display. The document discusses the history and services of GSM networks. It provides details on the architecture of GSM networks and their components like the mobile station, base station subsystem, and network subsystem.
gsm based led scrolling board ppt
This document describes a GSM-based notice board system using an LED display. The system allows users to send SMS messages from mobile phones that will be displayed as scrolling text on the LED board. It uses an 8051 microcontroller interfaced with a GSM modem via MAX232 for SMS reception, and controls an LED matrix display. The system has applications in advertising, education, traffic control and more due to its low cost and flexibility.
CCSA NGX R71 Course Overview
This document provides an overview of the Check Point Security Administration NGX R71 I course. The course objectives are to describe Check Point's unified network management approach, design a distributed environment using the provided topology, and install Security Gateway version R71. Additional objectives include performing backups and restores from the command line, configuring VPNs, managing users and authentication, and monitoring traffic. The course contains 10 modules that cover topics such as deployment, security policies, monitoring, upgrades, encryption, VPNs, and content security. Hands-on labs are included to provide experience working with the Check Point infrastructure and security tools.
Type 3 final project list 15 16
Project list for final year E&TC Engineering
IEEE Project ideas for engineering
100% Guarantee of running project
Complete traing and guidance along with practical sessions
DVD of Video sessions to each group
Mini p gsm based display
This document provides an introduction and methodology for a mini project report on a GSM-based electronic notice board. The project aims to design a notice board that can be updated remotely by SMS. It will use a microcontroller, GSM modem, and LCD display. The methodology involves using serial communication between these components to receive SMS messages, validate the sender, and display the message on the LCD screen. The document outlines the scope of work, aims, and objectives which include using the board for advertisements, education, traffic control, and more. It provides background on GSM technology and standards before discussing the network structure and components that will be employed in the prototype model.
Sms based notice board with 3 lcd
The system allows notices to be displayed on three LCD screens by sending an SMS to the GSM modem, which is connected to an microcontroller. The microcontroller then displays the SMS text on the LCD screens. It aims to provide a paperless solution for displaying notices in places like colleges, institutes, offices, etc. The document outlines the system's block diagram, components, power supply, microcontroller section, and applications. It concludes that the SMS-based electronic notice board overcomes issues with traditional paper-based boards.
Idisplay-Digital Noticeboard PPT-education Sector. (1)
Misha Infotech provides digital notice boards called IDisplays that allow instant communication within organizations. IDisplays feature text, graphic, and animation display capabilities and can be used for various purposes like promoting courses/facilities, displaying announcements, schedules and more. They provide benefits like inspiring employees, conveying messages quickly from a single location, and generating revenue from advertisements. IDisplays have applications in government, education, healthcare, transportation and other sectors.
Misha Infotech Presents IDisplay - A Digital Notice Board Software
IDisplay - Digital Notice Board, manufactures Misha Infotech is a customized process-driven software solutions provider based in India. Misha Infotech provides bespoke technological solutions to many entrepreneurs, enterprises and start up ventures, to help them gain maximum ROI for their business.
Adi telecom digital notice boards and hs reporting solution - v2 jan 2016
Transforming the site safety notice board. an end to printing and sticking just manage all your notice board content from the comfort of your desk
Max232
The MAX232 device is a dual driver/receiver that converts between TTL/CMOS and RS-232 signal levels. It contains a charge pump that generates the voltages required by RS-232 from a single 5V supply. Each receiver converts ±30V RS-232 signals to 5V TTL/CMOS levels, and each driver converts TTL/CMOS signals to RS-232 levels. It is commonly used to interface between RS-232 ports and devices that use lower voltage digital levels like microcontrollers.
REAL-TIME VEHICLE LOCKING AND TRACKING SYSTEM USING GSM AND GPS TECHNOLOGY-A...
This project presents a real-time vehicle locking and tracking system using GSM and GPS technology as an anti-theft system. The system permits localization of the automobile and transmitting the position to the owner on his mobile phone as a short message (SMS) at his request. It is composed of a GPS receiver, microcontroller and GSM modem. The microcontroller processes location data from the GPS receiver and sends it to the user via the GSM modem. It is a low-cost solution for tracking vehicles in case of theft and monitoring drivers.
Gsm based notice board
This document describes a GSM-based LCD notice board display system that allows messages to be sent to and displayed on the notice board via SMS. The system uses an 8051 microcontroller interfaced with a GSM modem and LCD display. The GSM modem receives SMS messages and sends them to the microcontroller, which then displays the messages on the LCD. The document outlines the components, circuit diagram, flowchart, and applications of the system, noting advantages like remote updating of notices from anywhere via mobile phone without printing costs.
Viewers also liked (19)
GSM BASED e-NOTICE BOARD final year project report
GSM BASED e-NOTICE BOARD final year project report
Multiuser sms based microcontroller wireless electronic board
Multiuser sms based microcontroller wireless electronic board
Wireless electronic notice board using gsm technolgy
Wireless electronic notice board using gsm technolgy
Idisplay-Digital Noticeboard PPT-education Sector. (1)
Idisplay-Digital Noticeboard PPT-education Sector. (1)
Misha Infotech Presents IDisplay - A Digital Notice Board Software
Misha Infotech Presents IDisplay - A Digital Notice Board Software
Adi telecom digital notice boards and hs reporting solution - v2 jan 2016
Adi telecom digital notice boards and hs reporting solution - v2 jan 2016
REAL-TIME VEHICLE LOCKING AND TRACKING SYSTEM USING GSM AND GPS TECHNOLOGY-A...
REAL-TIME VEHICLE LOCKING AND TRACKING SYSTEM USING GSM AND GPS TECHNOLOGY-A...
Similar to GSM Based e-Notice Board
GSM BASED e-NOTICE BOARD SRS
The document provides a software requirements specification for a GSM based e-notice board system. The system allows messages to be displayed on an LCD notice board by sending SMS texts from an authorized mobile phone to a GSM receiver module. It details the required system functionality, hardware and software requirements, theoretical foundation, system specifications including models and diagrams, task analysis and schedule. The system is designed to replace manual notice boards and allow remote updating of messages in an instantaneous manner through SMS.
Design and Implementation of A GSM-Based Scrolling Message Display Board
This research work is developed with two AT89C52 microcontrollers from Atmel. The microcontrollers provide all the functionality of the display notices and wireless control. The Display is obtained on a 7X96 Light Emitting Diode (LED) dot matrix display, arranged on a Vero board. A desired text message from a mobile phone is sent via a Global System for Mobile Communication (GSM) to the GSM module located at the receiving end. The GSM modem is connected, through MAX 232 Integrated Circuit (MAX 32 IC), to the AT89C52 microcontroller. The message that is stored in the Electrically Erasable Programmable Read Only Memory (EEPROM) is then displayed on the LED dot matrix display. This hardware uses regulated 5V, 500mA power supply. A three-terminal LM7805 is employed for regulation of the voltage. A bridge type full-wave rectifier is used to rectify the AC output of the secondary of 230/12V step down transformer. The system was tested to work according to specification.
Gsm based home(ppt)
This document provides an overview of a project to create a home automation system using GSM technology. The system would allow users to control home appliances via SMS from their mobile phone. It discusses the motivation, objectives, basic working, components, costs, timeline, and pros and cons of the system. The objectives are to enable remote control of appliances without being physically present and reduce power and time wastage. The estimated cost is 3,814 Rs. and the timeline outlines tasks from feasibility to testing over 6 months.
Gsm energy meter
The document provides an introduction and overview of a project that aims to enable remote monitoring and control of domestic energy meters using a microcontroller and GSM modem. This allows electricity departments to remotely obtain meter readings without needing to visit each house, reducing costs and human errors. The system works by having the microcontroller continuously monitor and record energy meter readings in its memory. Upon request, the live reading can be sent via the GSM modem to the electricity department. This provides benefits like improved monitoring of energy consumption patterns.
Monitoring and controlling_system_in_a_chicken_farm(eee499.blogspot.com)
This document describes a project to monitor and control a chicken farm using SMS messages. The system uses sensors to monitor the temperature and detect movement. It then sends SMS alerts to the owner's phone. The owner can reply by SMS to control devices like fans or heaters. The system connects a mobile phone to a PIC microcontroller using serial communication. It tests AT commands to send and receive SMS. The hardware includes a PIC, sensors, voltage regulator, LCD and MAX232. The project allows remote monitoring and control of the farm via inexpensive SMS technology.
Repot on gsm based arm
This document provides an overview and introduction to a proposed smart and intelligent GSM-based automatic meter reading and control system. It discusses the background of GSM networks and their adoption worldwide. It then describes an automatic meter reading system that can collect meter readings without site visits using technologies like GSM, and outlines the advantages this system provides over conventional methods. Finally, it presents the proposed system architecture and methodology for implementing a GSM-based automatic meter reading and control system.
accident detection tech seminar ppt.pptx
This document describes a mini project on a GSM based home automation system. The key components of the system include an Arduino Uno, GSM module, relay, LCD display, and mobile phone. The system allows users to remotely switch household appliances on and off using the GSM module and Arduino. It provides a low cost and reliable way to automate and control appliances in the home from a mobile phone.
IRJET- GSM Based Wireless Electronic Notice Board
This document describes a wireless electronic notice board system using GSM technology. The system allows users to send text messages from mobile phones to update the scrolling LED display notice board remotely without needing to physically change text on the board. It consists of a GSM module connected to a microcontroller which receives SMS messages and displays them on the scrolling LED board. This provides an efficient digital solution to manually updating notice boards and saves resources like paper, printing costs, and staff time compared to traditional boards.
Advanced Automation System in Industrial Applications Using PIC Microcontrol...
The main aim of this paper is to design and develop an advanced automation system in the
industries. In this technique we are using the GSM modem which have the SIM card present in it, the
user can send message on the 10 digit SIM number using the cell phone from any part of the world. The
micro controller is programmed using the embedded C. when the user will send the message to a
particular device that particular device will be on or we can also off the device. Example if the motor is
in over voltage, under voltage, over current in that time the microcontroller will trip the circuit and give
the message feedback to the user. The micro controller will read the temp from the sensor and it will
display the same on the LCD when the incoming temp crosses the set limit the micro controller will turn
OFF the device and will send the message to owner using the SIM card present in the GSM modem. We
can also check the continuous status of the device.
Aj03402040209
This document describes a system for remotely controlling a captive power plant using GSM technology. The system uses a GSM modem connected to a microcontroller to send and receive SMS commands to switch a power supply between a main electricity grid and on-site generator. The user can monitor parameters like fuel level, temperature and control starting/stopping the generator via SMS messages. This provides remote control and monitoring of the power plant without needing wired connections where they may not be feasible.
DOC-20230501-WA0007..pptx
This document describes an IoT-based electronic notice board system using an Arduino board. The system allows messages to be sent to the notice board via a web or SMS interface from any IP-based or cellular device. The messages are received by the Arduino board via GSM and displayed on the notice board screen. The system architecture includes modules for the Arduino, power supply, GSM connectivity, and IoT. It was developed to allow wireless updating of notices without using paper, and can be used in places like colleges, offices, stations, etc. The document reviews similar existing systems and their limitations.
sms based enotice board
This document describes a mini project on an electronic notice board using GSM technology. The notice board receives SMS messages from mobile phones and displays them. Key aspects include:
1. A GSM modem receives SMS messages and transfers them to a microcontroller via serial communication.
2. The microcontroller verifies the password in the SMS and displays the message on an LCD screen.
3. The system could be used by banks, schools, and for advertising to instantly share information via SMS.
A Review on GSM Based Monthly Electrical Energy Billing Through SMS
This document presents a review of a GSM-based monthly electrical energy billing system that sends SMS messages. The system aims to automatically monitor electricity usage, calculate bills, and send SMS messages to utilities and customers to avoid manual billing. It uses a microcontroller connected to an energy meter to count pulses and calculate bills. At month's end, a GSM modem attached to the meter replies to a predefined SMS from the utility with the customer's total usage and bill amount. The system is intended to reduce costs and errors from manual billing while increasing convenience for customers and utilities.
Reduce the Internal and External Interruptions and Improving Communications u...
This document presents a review of a GSM-based monthly electrical energy billing system that sends SMS messages. The system aims to automatically monitor electricity usage, calculate bills, and send SMS messages to utilities and customers to avoid manual billing. It uses a microcontroller connected to an energy meter to count pulses and calculate usage. At month's end, total usage is sent via GSM modem as an SMS to the utility and customer. The system aims to reduce billing errors and hassles for customers. It also allows utilities to remotely monitor usage and disconnect power if needed.
IJCER (www.ijceronline.com) International Journal of computational Engineerin...
This document summarizes a GSM modem-based data acquisition system. The system uses an AVR microcontroller and 8-channel ADC to continuously monitor sensors for parameters like temperature, rainfall, and humidity. It sends the sensor data via SMS to a mobile number every 10 minutes using a GSM modem connected to the microcontroller. The received data is stored on a PC database. The system allows remote monitoring of processes from distant locations without site visits. It can be used in industries and home automation for applications like monitoring and control.
Home Automation Using Mobile Communication
IOSR Journal of Computer Engineering (IOSR-JCE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of computer engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in computer technology. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
D017651519
This document summarizes a research paper on designing and implementing a home automation system using GSM (Global System for Mobile Communication) technology. The system allows controlling electrical devices at home remotely using a mobile phone by sending SMS messages. It uses a microcontroller programmed in assembly language to receive SMS messages via a GSM receiver/transmitter. When an SMS is received, the microcontroller reads the message and controls devices connected to its input/output ports through relays accordingly. The system was successfully tested to remotely control devices using a mobile phone.
Mini p gsm based display
This document describes a mini project to create a scrolling message display board that receives messages sent via SMS or GPRS. It consists of a GSM modem connected to a microcontroller that verifies passwords and displays messages on an LCD screen. The system allows public to send flash information from mobile phones or PCs for instant viewing. It has applications in areas like banks, traffic control, advertising and education. The document outlines the theoretical background, technical details, and conclusions of the project.
THEFT INTIMATION OF THE VEHICLE OVER GSM BY SMS WITH USER PROGRAMABLE NU...
This document describes a vehicle theft prevention project that uses a GSM modem and microcontroller to send SMS alerts to the vehicle owner when movement is detected, allowing the owner to remotely stop the engine. The system includes a GSM modem, microcontroller, relay, voltage regulator and battery. When theft is detected, the microcontroller sends an SMS to the owner via the GSM modem. If the owner replies with the word "stop", the microcontroller activates a relay to disconnect the ignition and stop the vehicle.
GSM Besed prepaid energy meter
Its work like a cell phone recharge phone if recharge is over electricity gone after that we need to recharge acount main benift is that we can oprate it from any where to the world
Similar to GSM Based e-Notice Board (20)
Design and Implementation of A GSM-Based Scrolling Message Display Board
Design and Implementation of A GSM-Based Scrolling Message Display Board
Monitoring and controlling_system_in_a_chicken_farm(eee499.blogspot.com)
Monitoring and controlling_system_in_a_chicken_farm(eee499.blogspot.com)
Advanced Automation System in Industrial Applications Using PIC Microcontrol...
Advanced Automation System in Industrial Applications Using PIC Microcontrol...
A Review on GSM Based Monthly Electrical Energy Billing Through SMS
A Review on GSM Based Monthly Electrical Energy Billing Through SMS
Reduce the Internal and External Interruptions and Improving Communications u...
Reduce the Internal and External Interruptions and Improving Communications u...
IJCER (www.ijceronline.com) International Journal of computational Engineerin...
IJCER (www.ijceronline.com) International Journal of computational Engineerin...
THEFT INTIMATION OF THE VEHICLE OVER GSM BY SMS WITH USER PROGRAMABLE NU...
THEFT INTIMATION OF THE VEHICLE OVER GSM BY SMS WITH USER PROGRAMABLE NU...
Recently uploaded
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsEncryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Recently uploaded (20)
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
GSM Based e-Notice Board
- 1. Presentation On Final Year B.E(CSE) Project : Phase 2 GSM BASED e-NOTICE BOARD Under Guidance Prof Nita K Presented by: Arjun Madhukar Nayak : 2sd10cs130 Venkatesh Agnihotri : 2sd10cs006 Aditya V Bharadwaj : 2sd10cs004
- 2. Contents 1. Introduction 2. Summery of related work 3. Architecture 4. Working of the system
- 3. 1. Introduction • The main aim of this project is to design an SMS driven automatic display notice board which can replace the currently used programmable electronic display. • The message to be displayed is sent through a SMS from an authorized sender. • The GSM receives the SMS, verifies the sender’s mobile identification pin(MIP) and displays the desired information on LCD.
- 4. Summary of related work • GSM based Airport automation:- This project is used in airport at the time of departure of the flight. Using this project, pilot sends request to the base station, if there is no aircrafts on the runway then base station will send landing permit message to the pilot using GSM. • GSM based automatic meter reading system using ARM:- The service provider for energy still uses conventional methods for getting the energy consumed by individual costumer. The proposed system automatically reads the energy consumed and sends it to the service provider using the existing SMS.
- 5. Comparison of our work with related work • Both are GSM based project with microcontroller as the controlling unit. • Use of Short Message Services(SMS) is common in both.
- 6. Preamble of the proposed work • The main aim of the project is to construct a SMS driven electronic notice board which will replace the current programmable notice board. • To update the notice board remotely and instantaneously.
- 7. Architecture
- 8. Description of the working of the project • GSM is connected to microcontroller and microcontroller is connected to LCD display. • Power supply is given to GSM and microcontroller.
- 9. •System is password protected. •So authorized user can send the SMS in this format <password><message body># •Admin can chance the password(SDMC)
- 10. •The SMS must be sent to the valid number which is present in the GSM modem. •GSM receives all the SMSs sent to its valid number and forwards it to microcontroller
- 11. •Microcontroller receives the message from GSM and stores it in a buffer and deletes all the messages in the GSM and keeps waiting for the GSM to send new message. •The stored message in the buffer is verified for first 4 character password.