Optical pulse trapping via a series of microring resonator (MRR) is presented. Large bandwidth of optical soliton is generated by input pulse propagating within the MRRs. Distinguished discrete wavelength or frequency pulses can be generated by using localized spatial pulses via a networks communication system. Quantum codes can be generated by using a polarization control unit and a beam splitter, incorporating to the MRRs. Here frequency band of 10.7 MHz and 16 MHz and wavelengths of 206.9 nm, 1448 nm, 2169 nm and 2489 nm are localized and obtained and used for quantum codes generation applicable for secured networks communication.
TSSB Brain Initiative - Overview of Nano and Molecular Communications and Bra...Walton Institute
This was a presentation given by Dr. Sasitharan Balasubramaniam, Director of Research at TSSG, in which he presented his current research in developing miniature devices for Brain implants. The talk focused on two types of implants, which includes (i) nanoelectronics that are used to stimulate neutrons, (ii) engineered cells that transfect and communicate to neurons. The talk will also touch on the potential applications for these types of devices.
TSSB Brain Initiative - Overview of Nano and Molecular Communications and Bra...Walton Institute
This was a presentation given by Dr. Sasitharan Balasubramaniam, Director of Research at TSSG, in which he presented his current research in developing miniature devices for Brain implants. The talk focused on two types of implants, which includes (i) nanoelectronics that are used to stimulate neutrons, (ii) engineered cells that transfect and communicate to neurons. The talk will also touch on the potential applications for these types of devices.
This PowerPoint is one small part of the Matter, Energy, and the Environment Unit from www.sciencepowerpoint.com. This unit consists of a five part 3,500+ slide PowerPoint roadmap, 12 page bundled homework package, modified homework, detailed answer keys, 20 pages of unit notes for students who may require assistance, follow along worksheets, and many review games. The homework and lesson notes chronologically follow the PowerPoint slideshow. The answer keys and unit notes are great for support professionals. The activities and discussion questions in the slideshow are meaningful. The PowerPoint includes built-in instructions, visuals, and review questions. Also included are critical class notes (color coded red), project ideas, video links, and review games. This unit also includes four PowerPoint review games (110+ slides each with Answers), 38+ video links, lab handouts, activity sheets, rubrics, materials list, templates, guides, and much more. Also included is a 190 slide first day of school PowerPoint presentation.
Areas of Focus: Matter, Dark Matter, Elements and Compounds, States of Matter, Solids, Liquids, Gases, Plasma, Law Conservation of Matter, Physical Change, Chemical Change, Gas Laws, Charles Law, Avogadro's Law, Ideal Gas Law, Pascal's Law, Archimedes Principle, Buoyancy, Seven Forms of Energy, Nuclear Energy, Electromagnet Spectrum, Waves / Wavelengths, Light (Visible Light), Refraction, Diffraction, Lens, Convex / Concave, Radiation, Electricity, Lightning, Static Electricity, Magnetism, Coulomb's Law, Conductors, Insulators, Semi-conductors, AC and DC current, Amps, Watts, Resistance, Magnetism, Faraday's Law, Compass, Relativity, Einstein, and E=MC2, Energy, First Law of Thermodynamics, Second Law of Thermodynamics-Third Law of Thermodynamics, Industrial Processes, Environmental Studies, The 4 R's, Sustainability, Human Population Growth, Carrying Capacity, Green Design, Renewable Forms of Energy (The 11th Hour)
This unit aligns with the Next Generation Science Standards and with Common Core Standards for ELA and Literacy for Science and Technical Subjects. See preview for more information
If you have any questions please feel free to contact me. Thanks again and best wishes. Sincerely, Ryan Murphy M.Ed www.sciencepowerpoint@gmail.com
Teaching Duration = 4+ Weeks
Signal Degradation In Optical Fiber
Losses in an optical fibre:-
The types of losses in a optical fibre are
Attenuation loss
Absorption
Scattering
Bending loss
Dispersion loss
Coupling loss
Study of Polarization Mode Dispersion in the Optical Digital Connection to Hi...ijcnac
Polarization Mode Dispersion (PMD) is a factor which limits the bit rate of the optical transmissions. The PMD is such an effect which is time broadening due to the dependence of the group velocity to the signal polarization. The deformation effects of the impulses become considerable from 40 Gb/s. This paper, we reviews the degrade PMD effect in the telecommunications optical connections to high bit rate, due to the evolution of quality factor (Q) according to the fiber length, bit rate and PMD coefficient , well as the impact PMD on the degree of polarization and electrical power, we discuss also the representation of the polarization state and PMD vector on the Poincare sphere.
Multiplex and De-multiplex of Generated Multi Optical Soliton By MRRs Using F...University of Malaya (UM)
A microring resonators (MRRs) system conecting to an ad/drop system is presented
to create ultra-short multi soliton pulses which can be used for optical communication. The
ad/drop system can be used to generate a high capacity of ultra-short soliton pulses. A bright
soliton pulse propagates inside the system, where chaotic noise can be generated. The
obtained multi solution have ful width at half maximum (FWHM) of 16 ps, 20 pm, 140 ps,
40 pm and fre spectrum range, FSR of 50 ps, 0.57 nm, 3.6 ns and 1.45 nm respectively.
Here, the single temporal soliton pulse having FWHM of 75 fs, 84 fs could be generated. The
ultra-short multi soliton pulses with wavelengths range from λ=150 to λ=1560 can be
multiplexed, transmited along an optical fiber optics with a length of 50 km and finaly be
de-multiplexed and detected by the users at he end of the optical transmision link.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Decimal Convertor Application for Optical Wireless Communication by Generatin...University of Malaya (UM)
Two systems consist of microring resonators (MRRs) and an add/drop filter are used to generate signals as localized multi wavelengths. Quantum dense encoding
can be performed by output signals of selected wavelengths incorporated to a polarization control system. Therefore dark and bright optical soliton pulses
with different time slot are generated. They can be converted into digital logic quantum codes using a decimal convertor system propagating along a wireless networks. Results show that multi soliton wavelength, ranged from 1.55 m to 1.56 m with FWHM and FSR of 10 pm and 600 pm can be generated respectively. Keywords- Micro Ring Resonator, Quantum Dense Coding (QDC), Wireless network communication system.
This PowerPoint is one small part of the Matter, Energy, and the Environment Unit from www.sciencepowerpoint.com. This unit consists of a five part 3,500+ slide PowerPoint roadmap, 12 page bundled homework package, modified homework, detailed answer keys, 20 pages of unit notes for students who may require assistance, follow along worksheets, and many review games. The homework and lesson notes chronologically follow the PowerPoint slideshow. The answer keys and unit notes are great for support professionals. The activities and discussion questions in the slideshow are meaningful. The PowerPoint includes built-in instructions, visuals, and review questions. Also included are critical class notes (color coded red), project ideas, video links, and review games. This unit also includes four PowerPoint review games (110+ slides each with Answers), 38+ video links, lab handouts, activity sheets, rubrics, materials list, templates, guides, and much more. Also included is a 190 slide first day of school PowerPoint presentation.
Areas of Focus: Matter, Dark Matter, Elements and Compounds, States of Matter, Solids, Liquids, Gases, Plasma, Law Conservation of Matter, Physical Change, Chemical Change, Gas Laws, Charles Law, Avogadro's Law, Ideal Gas Law, Pascal's Law, Archimedes Principle, Buoyancy, Seven Forms of Energy, Nuclear Energy, Electromagnet Spectrum, Waves / Wavelengths, Light (Visible Light), Refraction, Diffraction, Lens, Convex / Concave, Radiation, Electricity, Lightning, Static Electricity, Magnetism, Coulomb's Law, Conductors, Insulators, Semi-conductors, AC and DC current, Amps, Watts, Resistance, Magnetism, Faraday's Law, Compass, Relativity, Einstein, and E=MC2, Energy, First Law of Thermodynamics, Second Law of Thermodynamics-Third Law of Thermodynamics, Industrial Processes, Environmental Studies, The 4 R's, Sustainability, Human Population Growth, Carrying Capacity, Green Design, Renewable Forms of Energy (The 11th Hour)
This unit aligns with the Next Generation Science Standards and with Common Core Standards for ELA and Literacy for Science and Technical Subjects. See preview for more information
If you have any questions please feel free to contact me. Thanks again and best wishes. Sincerely, Ryan Murphy M.Ed www.sciencepowerpoint@gmail.com
Teaching Duration = 4+ Weeks
Signal Degradation In Optical Fiber
Losses in an optical fibre:-
The types of losses in a optical fibre are
Attenuation loss
Absorption
Scattering
Bending loss
Dispersion loss
Coupling loss
Study of Polarization Mode Dispersion in the Optical Digital Connection to Hi...ijcnac
Polarization Mode Dispersion (PMD) is a factor which limits the bit rate of the optical transmissions. The PMD is such an effect which is time broadening due to the dependence of the group velocity to the signal polarization. The deformation effects of the impulses become considerable from 40 Gb/s. This paper, we reviews the degrade PMD effect in the telecommunications optical connections to high bit rate, due to the evolution of quality factor (Q) according to the fiber length, bit rate and PMD coefficient , well as the impact PMD on the degree of polarization and electrical power, we discuss also the representation of the polarization state and PMD vector on the Poincare sphere.
Multiplex and De-multiplex of Generated Multi Optical Soliton By MRRs Using F...University of Malaya (UM)
A microring resonators (MRRs) system conecting to an ad/drop system is presented
to create ultra-short multi soliton pulses which can be used for optical communication. The
ad/drop system can be used to generate a high capacity of ultra-short soliton pulses. A bright
soliton pulse propagates inside the system, where chaotic noise can be generated. The
obtained multi solution have ful width at half maximum (FWHM) of 16 ps, 20 pm, 140 ps,
40 pm and fre spectrum range, FSR of 50 ps, 0.57 nm, 3.6 ns and 1.45 nm respectively.
Here, the single temporal soliton pulse having FWHM of 75 fs, 84 fs could be generated. The
ultra-short multi soliton pulses with wavelengths range from λ=150 to λ=1560 can be
multiplexed, transmited along an optical fiber optics with a length of 50 km and finaly be
de-multiplexed and detected by the users at he end of the optical transmision link.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Decimal Convertor Application for Optical Wireless Communication by Generatin...University of Malaya (UM)
Two systems consist of microring resonators (MRRs) and an add/drop filter are used to generate signals as localized multi wavelengths. Quantum dense encoding
can be performed by output signals of selected wavelengths incorporated to a polarization control system. Therefore dark and bright optical soliton pulses
with different time slot are generated. They can be converted into digital logic quantum codes using a decimal convertor system propagating along a wireless networks. Results show that multi soliton wavelength, ranged from 1.55 m to 1.56 m with FWHM and FSR of 10 pm and 600 pm can be generated respectively. Keywords- Micro Ring Resonator, Quantum Dense Coding (QDC), Wireless network communication system.
Generation of Nanometer Optical Tweezers Used for Optical Communication Netw...University of Malaya (UM)
A system of Half-Panda microring resonator (MRR) is proposed to generate ultra-short nanometer (nm)
optical tweezers. The dark soliton propagates inside nonlinear MRR. Molecules or photons transport within the system when the dark soliton is used as input pulse. Nano optical tweezers can be generated and used to many applications in optical communication networks. Here the smallest nano optical tweezers signals with full width at half maximum (FWHM) of 9 nm is obtained where the free spectrum range (FSR) of 50 nm is simulated.
The microring resonator (MRR) system can be used to trap optical solitons. These types of pulses are used to generate entangled photon required for quantum keys. The required information can be provided via the quantum keys. We simulate localized spatial and temporal soliton pulses to form an optical communication used in wireless systems. The input soliton pulses with peak power of 500 and 550 mW are used to generate a spectrum of chaotic signals within the nonlinear medium, where the nonlinear refractive index is selected to n2=2.2 x 10-17m2/W. The ultra-short soliton pulse can be trapped within the 3.52 GHz frequency, where the temporal soliton pulse with FWHM of 25 ps could be simulated and used to generate entangled photon pair. The generated entangled photons are input into a wireless router system which is used to transfer them within a network communication system. The router system is used to receive the information and convert it to analog signals at the end of the transmission link, thus data can be sent to the users via a secured optical communication system using MRRs.
IOSR Journal of Applied Physics (IOSR-JAP) is an open access international journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Long Distance Communication Using Localized Optical Soliton via Entangled Ph...University of Malaya (UM)
A system of microring resonators (MRRs) is presented to generation entangled photon. Different time slot for continuous variable quantum key distribution (CVQKD) use is applicable in optical wireless link. Chaotic behavior of a soliton pulse within the device can be presented respect to the Kerr nonlinear type of light in the MRR devices. Continuous spatial and temporal signals are generated spreading over the spectrum. The CVQKD is formed using the localized spatial soliton pulse. Here localized temporal soliton with FWHM and FSR of 0.2 ps and 0.58 ns is obtained respectively. The spatial soliton pulse has a FWHM of 80 pm. Transmission of soliton pulse with FWHM of 1.5 ps is simulated along the long distance fiber optics where the polarized photons are formed incorporating with the polarization control unit into the MRRs, which allows different time slot entangled photons to be randomly formed.
IOSR Journal of Applied Physics (IOSR-JAP) is an open access international journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Cryptography Scheme of an Optical Switching System Using Pico/Femto Second So...University of Malaya (UM)
We propose a system of microring resonators (MRRs) incorporating with an add/drop filter system. Optical soliton can be simulated and used to generate entangled photon, applicable in single and multiple optical switching. Chaotic signals can be generated via the MRRs system. Therefore continuous spatial and temporal signals are generated spreading over the spectrum. Polarized photons are formed incorporating the
polarization control unit into the MRRs, which allows different time slot entangled photons to be randomly formed. Results show the single soliton pulse of 0.7 ps where the multi soliton pulse with FSR and FWHM of 0.6 ns and 20 ps are generated using the add/drop filter system. Here Ultra-short single soliton pulse with FWHM=42 fs can be simulated. These pulses are providing required communication signals to generate pair of polarization entangled photons among different time frame where the polarization control unit and polarizer beam splitter (PBS) are connected to the ring resonator system.
Ultra-short Multi Soliton Generation for Application in Long Distance Commun...University of Malaya (UM)
Generation of picometer optical soliton pulses is investigated using a nonlinear PANDA ring resonator system connecting to an add/drop filter system. The objectives of the research are to employ systems of microring resonator (MRR) to generate binary signals to be carried out along fiber optic communication. Effective parameters such as refractive indices of a silicon waveguide, coupling coefficients (), coupling loss, radius of the ring (R) and the input power can be selected properly to operate the nonlinear behavior. The input Gaussian laser pulses with power of 600 mW are inserted into the system. The central wavelength of the input power has been selected to λ0=1.55 µm where the nonlinear refractive index of the medium is n2=2.6×10−17 m2 W−1. Therefore binary signals generated by the add/drop filter system can be converted to secure codes where the decoding process of the transmitted codes can be obtained at the final step. Here, multi soliton pulses with full width at half maximum (FWHM) of 325 could be generated, converted to secure codes and finally detected over 70 km optical fiber communication link.
Generation of Quantum Photon Information Using Extremely Narrow Optical Tweez...University of Malaya (UM)
A system of microring resonator (MRR) is presented to generate extremely narrow optical tweezers. An add/drop filter system consisting of one centered ring and one smaller ring on the left side can be used to generate extremely narrow pulse of optical tweezers. Optical tweezers generated by the dark-Gaussian behavior propagate via the MRRs system, where the input Gaussian pulse controls the output signal at the drop port of the system. Here the output optical tweezers can be connected to a quantum signal processing system (receiver), where it can be used to generate high capacity quantum codes within series of MRR’s and an add/drop filter. Detection of the encoded signals known as quantum bits can be done by the receiver unit system. Generated entangled photon pair propagates via an optical communication link. Here, the result of optical tweezers with full width at half maximum (FWHM) of 0.3 nm, 0.8 nm and 1.6 nm, 1.3 nm are obtained at the through and drop ports of the system respectively. These results used to be transmitted through a quantum signal processor via an optical computer network communication link.
Nonlinear behaviors of light such as chaos can be observed during propagation of a Gaussian laser beam inside a single ring resonator system. Chaotic signals can be employed to generate data of logic codes to be transmitted along the fiber optic communication. Controlling of the chaotic signals can be implemented by the parameter of the system such as coupling coefficient, the ring’s radius, coupling loss and input power. The central wavelength of the input Gaussian laser pulse has been selected to λ0=1550 nm where the nonlinear refractive index of the medium is n2=1.4×10−13 m2 W−1. Therefore the data of logic codes generated by the single ring resonator system can be converted to transmitting secured codes where the decoding process of the transmitted codes can be obtained at the end of the transmission link. Here generation of logic code of “101010101011010101011101011110101101010101010110101” is performed, encoded and decoded over 50 km fiber optics. Thus secured transmitting of signals can be obtained along the long distance fiber
communication.
Secured Transportation of Quantum Codes Using Integrated PANDA-Add/drop and T...University of Malaya (UM)
New system of quantum cryptography for communication networks is proposed. Multi optical Soliton can be generated and propagated via an add/drop interferometer system incorporated with a time division multiple access (TDMA) system. Here the transportation of quantum codes is performed. Chaotic output signals from the PANDA ring resonator are inserted into the add/drop filter system. Using the add/drop filter system multi dark and bright solitons can be obtained and used to generate entangled quantum codes for internet security. In this research soliton pulses with FWHM and FSR of 325 pm and 880 nm are generated, respectively.
IEEE 802.15.3c WPAN Standard Using Millimeter Optical Soliton Pulse Generated...University of Malaya (UM)
A system of microring resonators (MRRs) connected to an optical modified add/drop filter system known as a Panda ring resonator is presented. The optical soliton pulse of 60 GHz frequency band can be generated and used for Wireless Personal Area Network (WPAN) applications such as IEEE 802.15.3c. The system uses chaotic signals generated by a Gaussian laser pulse propagating within a nonlinear MRRs system. The chaotic signals can be generated via a series of microring resonators, where the filtering process is performed via the Panda ring resonator system wherein ultrashort single and multiple optical soliton pulses of 60 GHz are generated and seen at the through and drop ports, respectively. The IEEE 802.15.3c standard operates at the 60 GHz frequency band, and it is applicable for a short distance optical communication such as indoor systems, where the higher transmission data rate can be performed using a high frequency band of the output optical soliton pulses. The single and multi-soliton pulses could be generated and converted to logic codes, where the bandwidths of these pulses are 5 and 20 MHz, respectively. Thus, these types of signals can be used in optical indoor systems and transmission link using appropriate components such as transmitter, fiber optics, amplifier, and receiver.
Similar to Frequency-Wavelength Trapping by Integrated Ring Resonators For Secured Network and Communication Systems (20)
Tunable and Storage Potential Wells using Microring Resonator System for Bioc...University of Malaya (UM)
In this work, we propose the technique that can be used to trap/delivery bio-cell by using the concept of dark solitons and potential well, in which the trapping force is formed by using the intense optical vortices generated within the series ring and the PANDA ring resonator, the microscopic bio-cell can be trapped and moved dynamically, in which the valley of the dark soliton is generated and controlled within the PANDA ring resonator by the control port signals.
ASK-to-PSK Generation based on Nonlinear Microring Resonators Coupled to One ...University of Malaya (UM)
We present a new concept of ASK-to-PSK generation based on nonlinear microring resonators coupled to one MZI arm by using OptiWave FDTD method. By microring resonator increase from one to three microring (SR to TR), we found that the amplitude shift keying (ASK) are increase exactly and the phase shift keying (PSK) is equal to π.
All-optical logic XOR/XNOR gate operation using microring and nanoring reson...University of Malaya (UM)
In this paper, a novel system of simultaneous optical logic AND and OR gates using dark -bright soliton conversion within the add/drop optical filter system is proposed. The input logic „0‟ and control logic „0‟ are formed by using the dark soliton pulse (D) trains. By using the dark-bright soliton conversion behavior within the π/2 phase shift device, we found that the simultaneous optical logic AND and OR gates at the drop and through ports can be randomly formed, respectively.
Simulation and Analysis of Multisoliton Generation Using a PANDA Ring Resonat...University of Malaya (UM)
A novel system of multisoliton generation using nonlinear equations of the propagating signals is presented. This system uses a PANDA ring resonator incorporated with an add/drop filter system. Using resonant conditions, the intense optical fields known as multisolitons can be generated and propagated within a Kerr-type nonlinear medium. The present simulation results show that multisolitons can be controlled by using additional Gaussian pulses input into the add port of the PANDA system. For the soliton pulse in the microring device, a balance should be achieved between dispersion and nonlinear lengths. Chaotic output signals from the PANDA ring resonator are input into the add/drop filter system. Chaotic signals can be filtered by using the add/drop filter system, in which multi dark and bright solitons can be generated. In this work multi dark and bright solitons with an FWHM and an FSR of 425pm and 1.145 nm are generated, respectively, where the Gaussian pulse with a central wavelength of 1.55 μm and power of 600 mW is input into the system.
Dark-Bright Solitons Conversion System for Secured and Long Distance Optical ...University of Malaya (UM)
We suggest a new purpose of a security scheme by employing the nonlinear behaviors of temporal dark and bright solitons amongst a micro-ring resonator system for signal security application. The chaotic signal is generated, where the required bright soliton pulse can be recovered and discovered by an add/drop filtering device. By using the reserve ring parameters, simulation results obtained have demonstrated that the soliton conversion can be performed. In application, the chaotic signal is generated and formed by the dark soliton inside a nonlinear micro-ring device. The different temporal soliton response time can be seen, the response times of 169 and 84 ns are mentioned for temporal dark and bright solitons, respectively, which can also be used to figure the security key. The technique of optical conversion can be use to improve the optical communication network systems.
In this study an interesting system in which a bright and dark soliton pulse can be stopped inside a nonlinear waveguide is presented. Here, we propose a system consisting of a series of ring resonators for optical trapping within a nonlinear waveguide. The bright and dark solitons can be controlled and slowed down within the waveguide. The FWHM for the output signals are calculated and used as an optical memory. Bright and dark soliton behaviors within a micro and nano ring resonator are also investigated and described. The required pulse is filtered and amplified, can be controlled and localized within the system. The localized bright and dark solitons are stopped by controlling the input power,which means that the photon stopping can be controlled by light in a ring resonator.
We propose a novel system of the dynamic optical tweezers generated by a dark soliton in the fiber optic loop. A dark soliton known as an optical tweezer is amplified and tuned within the microring resonator (MRR) system. The required tunable tweezers with different widthsand powers can be controlled. The analysis of dark-bright soliton conversion using a dark soliton pulse propagating within a MRR is analyzed. The control dark soliton is input into the system via the add port of the add/drop filter. The dynamic behavior of the dark-brightsoliton conversion is observed. The required stable signal is obtained via a drop and throughput ports of the add/drop filter with some suitable parameters. In application, generation of optical tweezers and transportation can be realized by using the proposed system, where the communication network is performed.
A molecular cryptography technique using optical tweezers, is proposed. The optical tweezer transports the molecules in the communication system. The optical tweezer generated by the dark soliton is in the form of a potential well. The dark soliton propagates inside nonlinear microring resonator (NMRR). Transportation of molecules is implemented when the dark soliton is used as input pulse. The input bright soliton control the output signal at the drop port of the system. Output optical tweezers can be connected to the quantum signal processing system consisting of transmitter and the receiver. The transmitter is used to generate the high capacity quantum codes within the series of MRR’s and anadd/drop filter. The receiver will detect the encoded signals known as quantum bits. The transmitter will generate the entangled photon pair which propagates via an optical communication link. Here the smallest optical tweezer with respect to the full width at half maximum FWHM is 17.6 nm in the formof potential well is obtained and transmitted through quantum signal processor via an optical link.
This research is used to control the nonlinear behavior of silicon microring resonators, MRR’s such as chaos and bifurcation. Increasing of nonlinear refractive indices, coupling coefficients and radius of the SMRR leads to descend input power and round trips wherein the bifurcation occurs. As result, bifurcation or chaos behaviors are seen at lower input power of 44 W, where the nonlinear refractive index is n2=3.2×10−20 m2/W. Smallest round trips can be seen for the R=40 µm and 0.1 respectively. Signals from the SMRR are passing through a polarizer beam splitter to generate quantum
binary codes which are used in wireless network communication.
The aim of this study is to generate nano optical tweezers to be connected to an optical quantum signal processing system in order to transmit quantum photon via an optical communication link. A system of microring resonator (MRR) known as Half-Panda is proposed to generate nano optical tweezers. Optical tweezers can be used to transport molecules in a communication link. The dark soliton propagates inside nonlinear MRR. Transportation of molecules or photons is implemented when the dark soliton is used as input pulse. The input Gaussian soliton is used to control the output signal at the through and drop ports of the system. Output nano optical tweezers can be connected to the quantum signal processing system consisting of a receiver and transmitter. The receiver will detect the signals of optical tweezers and transmit them via wired/wireless as quantum bits. The transmitter will generate the entangled photon pair which propagates via an optical communication link. Here the smallest nano optical tweezers signals with width at half maximum (FWHM) of 4.2 nm is obtained where the free spectrum range (FSR) of 50 nm is simulated.
Single Soliton Bandwidth Generation and Manipulation by Microring ResonatorUniversity of Malaya (UM)
In this paper, we propose a system for chaotic signal generation using a microring resonator (MRR) fiber optic system. This system uses a regular laserdiode as input power and can be incorporated with an optical add/drop filter system. When light from the laser diode feedbacks to the fiber ring resonator, the actual chaotic signal is produced by using the appropriate fiber ring resonator parameters and also the laser diode input power. The filtering process of the chaotic signals occurs during the round-trip of the pulse within the ring resonators. The single soliton pulses generation and bandwidth manipulation of the pulse can be performed using the add/drop system. Results obtained have established particular possibilities from the application. The obtained results show the effects of coupling coefficients on the bandwidth of the single soliton pulse, where the chaotic behaviors of the input pulses are presented.
NEW SYSTEM OF CHAOTIC SIGNAL GENERATION BASED ON COUPLING COEFFICIENTS APPLI...University of Malaya (UM)
The nonlinear behavior (chaotic) of light traveling in an optical fiber ring resonator such as an add/drop system
is presented. The chaotic behavior is considered to be a beneficial effect that can be used in the communication
system. Such a system can be used to secure the information signals, therefore, the ability of chaotic carriers to synchronize in a communication system is performed. The used optical material is InGaAsP/InP regarding to suitable parameters of the system. The nonlinear refractive index is fixed to n2 = 3.8 × 10−20 m2
/W, and the 20,000 iterations of round-trip within the system is simulated. The input powers are selected at 1 W, where the coupling coefficient of the system varies according to two critical cases, where 0 0.1
and 0.1 1. As a results, larger coupler coefficient corresponds to lower input power for the case of
0 0.1 and smaller coupling coefficient of the system is corresponds to lower input power when
0.1 1. To optimize the microring systems, Lower input power is recommended in many applications in optical optical communication systems.
Chaotic soliton can be generated using a nonlinear PANDA system. The research uses microring resonator
(MRR) to generate and trap chaotic signals along fiber optic communication. The parameters such as refractive
indices of a silicon waveguide, coupling coefficients ( ), coupling loss, radius of the ring (R) and the input power can be selected properly to operate the nonlinear behavior. The input Gaussian laser pulses with power of 0.45 W are inserted into the system. The central wavelength of the input power has been selected to λ0=1.55 µm where the nonlinear refractive index of the medium is n2=1.3×10−17 m2 W−1
. The generated chaotic signals with Full at Half
Maximum of 24 pm can be transmitted along the fiber optic with length of 195 km. The trapping of chaotic signals can be obtained at the end of the transmission link. Here signals with 600 fm bandwidth could be trapped within the system.
Quantum Transmission of Optical Tweezers Via Fiber Optic Using Half-Panda Sys...University of Malaya (UM)
: The aim of this study is to generate nano optical tweezers to be connected to an optical transmission link in order to transmit tweezers via an optical fiber. A system of microring resonator (MRR) known as Half-Panda is proposed to generate nano optical tweezers. Optical tweezers can be used to transport molecules in a communication link. The dark soliton propagates inside nonlinear MRR. The input bright soliton is used to control the output signal at the through and drop ports of the system. Throughput nano optical tweezers can be connected to the fiber optic with a length of 100 km, where transmission of tweezers can be performed. The optical receiver will detect the signals of optical tweezers. A transmitter system can be used to transmit the tweezers via wired/wireless link to the users in a short communication link. Here the nano optical tweezers signals with width at half maximum (FWHM) of 33 nm are obtained and transmitted, where the free spectrum range (FSR) of the pulses is 50 nm.
Nonlinear Chaotic Signals Generation and Transmission within an Optical Fiber...University of Malaya (UM)
The nonlinear behavior of light such as chaos traveling in an optical fiber ring resonator as a single
ring resonator is presented. This phenomenon can be used to generate secret codes or arbitrary digital codes of "0" and "1" applicable in the communication system such as time division multiple access (TDMA) system. Such a system can be used to secure the information signals therefore, the ability of chaotic carriers to synchronize in a communication system is performed. The used optical material is InGaAsP/InP regarding to suitable parameters of the system. The nonlinear refractive index is fixed to n2=3.8 × 10−20 m2
/W. The input power is selected at 1 W, where the coupling coefficient of the system varies as
0 0.1. As a result, train of logic
codes could be generated and transmitted via a fiber communication link using the chaotic signals. To optimize the microring systems, Lower input power is recommended in many applications in optical optical
communication systems.
Generation and wired/wireless transmission of IEEE802.16m signal using solito...University of Malaya (UM)
Multi-carrier generation is the main building block for generating WiMax signal. In order to use WiMax signal in radio over fiber applications the use of all
optical generation of RF signals is required. To generate multi carriers optically, the system consisting ofseries of microring resonators (MRRs)
incorporating with an add/drop filter system are used. Thus the high frequency (THz) solitons range of 193.29–193.35 THz at frequencies of 193.333,
193.3355 and 193.3388 THz with the free spectralrange of 2.5 and 5.8 GHz could be performed using MRRs, providing required WiMax signal used in
wired/wireless communication. The generated multi carriers are multiplexed with the single carrier soliton and transmitted through single mode fiber (SMF)
after being beaten to photodiode, a WiMax signal is propagated wirelessly in transmitter antenna base station and is received by the second antenna located
in the receiver.
Transmission of data with orthogonal frequency division multiplexing techniqu...University of Malaya (UM)
Microring resonators (MRRs) can be used to generate optical millimetre-wave solitons with a broadband frequency of
40–60 GHz. Non-linear light behaviours within MRRs, such as chaotic signals, can be used to generate logic codes (digital
codes). The soliton signals can be multiplexed and modulated with the logic codes using an orthogonal frequency division
multiplexing (OFDM) technique to transmit the data via a network system. OFDM uses overlapping subcarriers without
causing inter-carrier interference. It provides both a high data rate and symbol duration using frequency division multiplexing
over multiple subcarriers within one channel. The results show that MRRs support both single-carrier and multi-carrier optical
soliton pulses, which can be used in an OFDM based on whether fast Fourier transform or discrete wavelet transform
transmission/receiver system. Localised ultra-short soliton pulses within frequencies of 50 and 52 GHz can be seen at the
throughput port of the panda system with respect to full-width at half-maximum (FWHM) and free spectrum range of 5 MHz
and 2 GHz, respectively. The soliton pulses with FWHMs of 10 MHz could be generated at the drop port. Therefore,
transmission of data information can be performed via a communication network using soliton pulse carriers and an OFDM
technique.
A system of microring resonator (MRR) conected to an optical panda ring
resonator is presented. The optical soliton pulse of 57-61 GHz frequency band can be
generated and used for aplications in optical communications. The system uses a Gausian
laser pulse propagating within a nonlinear MRRs system. The ultra short single and multi
optical soliton pulses within the range of 57-61 GHz can be generated and sen at he through
and drop ports of the system. This range is aplicable for a short distance optical
communication such as indor systems. The generated optical soliton pulses have the
bandwidth of 5 and 20 MHz.
In this study we explain the optical bistability phenomena in a nonlinear fiber optic ring resonator which consists of a single microring resonator connecting to a single coupler to show the benefit of light propagating within a nonlinear medium. In such a way, nonlinear behaviors of the output signals from a fiber optic ring resonator such as the bistability have been investigated with an iterative method using an input Gaussian beam. Here, we present the dynamic simulation of light travelling in a fiber optic coupled with a Single coupler.
Comparing Evolved Extractive Text Summary Scores of Bidirectional Encoder Rep...University of Maribor
Slides from:
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Track: Artificial Intelligence
https://www.etran.rs/2024/en/home-english/
Nutraceutical market, scope and growth: Herbal drug technologyLokesh Patil
As consumer awareness of health and wellness rises, the nutraceutical market—which includes goods like functional meals, drinks, and dietary supplements that provide health advantages beyond basic nutrition—is growing significantly. As healthcare expenses rise, the population ages, and people want natural and preventative health solutions more and more, this industry is increasing quickly. Further driving market expansion are product formulation innovations and the use of cutting-edge technology for customized nutrition. With its worldwide reach, the nutraceutical industry is expected to keep growing and provide significant chances for research and investment in a number of categories, including vitamins, minerals, probiotics, and herbal supplements.
Cancer cell metabolism: special Reference to Lactate PathwayAADYARAJPANDEY1
Normal Cell Metabolism:
Cellular respiration describes the series of steps that cells use to break down sugar and other chemicals to get the energy we need to function.
Energy is stored in the bonds of glucose and when glucose is broken down, much of that energy is released.
Cell utilize energy in the form of ATP.
The first step of respiration is called glycolysis. In a series of steps, glycolysis breaks glucose into two smaller molecules - a chemical called pyruvate. A small amount of ATP is formed during this process.
Most healthy cells continue the breakdown in a second process, called the Kreb's cycle. The Kreb's cycle allows cells to “burn” the pyruvates made in glycolysis to get more ATP.
The last step in the breakdown of glucose is called oxidative phosphorylation (Ox-Phos).
It takes place in specialized cell structures called mitochondria. This process produces a large amount of ATP. Importantly, cells need oxygen to complete oxidative phosphorylation.
If a cell completes only glycolysis, only 2 molecules of ATP are made per glucose. However, if the cell completes the entire respiration process (glycolysis - Kreb's - oxidative phosphorylation), about 36 molecules of ATP are created, giving it much more energy to use.
IN CANCER CELL:
Unlike healthy cells that "burn" the entire molecule of sugar to capture a large amount of energy as ATP, cancer cells are wasteful.
Cancer cells only partially break down sugar molecules. They overuse the first step of respiration, glycolysis. They frequently do not complete the second step, oxidative phosphorylation.
This results in only 2 molecules of ATP per each glucose molecule instead of the 36 or so ATPs healthy cells gain. As a result, cancer cells need to use a lot more sugar molecules to get enough energy to survive.
Unlike healthy cells that "burn" the entire molecule of sugar to capture a large amount of energy as ATP, cancer cells are wasteful.
Cancer cells only partially break down sugar molecules. They overuse the first step of respiration, glycolysis. They frequently do not complete the second step, oxidative phosphorylation.
This results in only 2 molecules of ATP per each glucose molecule instead of the 36 or so ATPs healthy cells gain. As a result, cancer cells need to use a lot more sugar molecules to get enough energy to survive.
introduction to WARBERG PHENOMENA:
WARBURG EFFECT Usually, cancer cells are highly glycolytic (glucose addiction) and take up more glucose than do normal cells from outside.
Otto Heinrich Warburg (; 8 October 1883 – 1 August 1970) In 1931 was awarded the Nobel Prize in Physiology for his "discovery of the nature and mode of action of the respiratory enzyme.
WARNBURG EFFECT : cancer cells under aerobic (well-oxygenated) conditions to metabolize glucose to lactate (aerobic glycolysis) is known as the Warburg effect. Warburg made the observation that tumor slices consume glucose and secrete lactate at a higher rate than normal tissues.
Seminar of U.V. Spectroscopy by SAMIR PANDASAMIR PANDA
Spectroscopy is a branch of science dealing the study of interaction of electromagnetic radiation with matter.
Ultraviolet-visible spectroscopy refers to absorption spectroscopy or reflect spectroscopy in the UV-VIS spectral region.
Ultraviolet-visible spectroscopy is an analytical method that can measure the amount of light received by the analyte.
What is greenhouse gasses and how many gasses are there to affect the Earth.moosaasad1975
What are greenhouse gasses how they affect the earth and its environment what is the future of the environment and earth how the weather and the climate effects.
Observation of Io’s Resurfacing via Plume Deposition Using Ground-based Adapt...Sérgio Sacani
Since volcanic activity was first discovered on Io from Voyager images in 1979, changes
on Io’s surface have been monitored from both spacecraft and ground-based telescopes.
Here, we present the highest spatial resolution images of Io ever obtained from a groundbased telescope. These images, acquired by the SHARK-VIS instrument on the Large
Binocular Telescope, show evidence of a major resurfacing event on Io’s trailing hemisphere. When compared to the most recent spacecraft images, the SHARK-VIS images
show that a plume deposit from a powerful eruption at Pillan Patera has covered part
of the long-lived Pele plume deposit. Although this type of resurfacing event may be common on Io, few have been detected due to the rarity of spacecraft visits and the previously low spatial resolution available from Earth-based telescopes. The SHARK-VIS instrument ushers in a new era of high resolution imaging of Io’s surface using adaptive
optics at visible wavelengths.
Earliest Galaxies in the JADES Origins Field: Luminosity Function and Cosmic ...Sérgio Sacani
We characterize the earliest galaxy population in the JADES Origins Field (JOF), the deepest
imaging field observed with JWST. We make use of the ancillary Hubble optical images (5 filters
spanning 0.4−0.9µm) and novel JWST images with 14 filters spanning 0.8−5µm, including 7 mediumband filters, and reaching total exposure times of up to 46 hours per filter. We combine all our data
at > 2.3µm to construct an ultradeep image, reaching as deep as ≈ 31.4 AB mag in the stack and
30.3-31.0 AB mag (5σ, r = 0.1” circular aperture) in individual filters. We measure photometric
redshifts and use robust selection criteria to identify a sample of eight galaxy candidates at redshifts
z = 11.5 − 15. These objects show compact half-light radii of R1/2 ∼ 50 − 200pc, stellar masses of
M⋆ ∼ 107−108M⊙, and star-formation rates of SFR ∼ 0.1−1 M⊙ yr−1
. Our search finds no candidates
at 15 < z < 20, placing upper limits at these redshifts. We develop a forward modeling approach to
infer the properties of the evolving luminosity function without binning in redshift or luminosity that
marginalizes over the photometric redshift uncertainty of our candidate galaxies and incorporates the
impact of non-detections. We find a z = 12 luminosity function in good agreement with prior results,
and that the luminosity function normalization and UV luminosity density decline by a factor of ∼ 2.5
from z = 12 to z = 14. We discuss the possible implications of our results in the context of theoretical
models for evolution of the dark matter halo mass function.
Slide 1: Title Slide
Extrachromosomal Inheritance
Slide 2: Introduction to Extrachromosomal Inheritance
Definition: Extrachromosomal inheritance refers to the transmission of genetic material that is not found within the nucleus.
Key Components: Involves genes located in mitochondria, chloroplasts, and plasmids.
Slide 3: Mitochondrial Inheritance
Mitochondria: Organelles responsible for energy production.
Mitochondrial DNA (mtDNA): Circular DNA molecule found in mitochondria.
Inheritance Pattern: Maternally inherited, meaning it is passed from mothers to all their offspring.
Diseases: Examples include Leber’s hereditary optic neuropathy (LHON) and mitochondrial myopathy.
Slide 4: Chloroplast Inheritance
Chloroplasts: Organelles responsible for photosynthesis in plants.
Chloroplast DNA (cpDNA): Circular DNA molecule found in chloroplasts.
Inheritance Pattern: Often maternally inherited in most plants, but can vary in some species.
Examples: Variegation in plants, where leaf color patterns are determined by chloroplast DNA.
Slide 5: Plasmid Inheritance
Plasmids: Small, circular DNA molecules found in bacteria and some eukaryotes.
Features: Can carry antibiotic resistance genes and can be transferred between cells through processes like conjugation.
Significance: Important in biotechnology for gene cloning and genetic engineering.
Slide 6: Mechanisms of Extrachromosomal Inheritance
Non-Mendelian Patterns: Do not follow Mendel’s laws of inheritance.
Cytoplasmic Segregation: During cell division, organelles like mitochondria and chloroplasts are randomly distributed to daughter cells.
Heteroplasmy: Presence of more than one type of organellar genome within a cell, leading to variation in expression.
Slide 7: Examples of Extrachromosomal Inheritance
Four O’clock Plant (Mirabilis jalapa): Shows variegated leaves due to different cpDNA in leaf cells.
Petite Mutants in Yeast: Result from mutations in mitochondrial DNA affecting respiration.
Slide 8: Importance of Extrachromosomal Inheritance
Evolution: Provides insight into the evolution of eukaryotic cells.
Medicine: Understanding mitochondrial inheritance helps in diagnosing and treating mitochondrial diseases.
Agriculture: Chloroplast inheritance can be used in plant breeding and genetic modification.
Slide 9: Recent Research and Advances
Gene Editing: Techniques like CRISPR-Cas9 are being used to edit mitochondrial and chloroplast DNA.
Therapies: Development of mitochondrial replacement therapy (MRT) for preventing mitochondrial diseases.
Slide 10: Conclusion
Summary: Extrachromosomal inheritance involves the transmission of genetic material outside the nucleus and plays a crucial role in genetics, medicine, and biotechnology.
Future Directions: Continued research and technological advancements hold promise for new treatments and applications.
Slide 11: Questions and Discussion
Invite Audience: Open the floor for any questions or further discussion on the topic.
Frequency-Wavelength Trapping by Integrated Ring Resonators For Secured Network and Communication Systems
1. Frequency-Wavelength Trapping by Integrated Ring Resonators
For Secured Network and Communication Systems
I. S. Amiri*1
, A. Nikoukar2
, G. R. Vahedi3
, A. A. Shojaei4
, J. Ali1
and P. P. Yupapin5
*1
Institute of Advanced Photonics Science, Nanotechnology Research Alliance, Universiti
Teknologi Malaysia (UTM), 81310 Johor Bahru, Malaysia
2
Faculty of Computer Science & Information Systems (FCSIS), Universiti Teknologi Malaysia (UTM),
81300 Johor Bahru, Malaysia
3
Faculty of Science, Department of Physics, Universiti Putra Malaysia, 43400 UPM Serdang
4
Centre for Artificial Intelligence and Robotics, Universiti Teknologi Malaysia (UTM),
Kuala Lumpur, 54100 Malaysia
5
Advanced Research Center for Photonics, Faculty of Science King Mongkut’s
Institute of Technology Ladkrabang Bangkok 10520, Thailand
Abstract
Optical pulse trapping via a series of microring resonator
(MRR) is presented. Large bandwidth of optical soliton is
generated by input pulse propagating within the MRRs.
Distinguished discrete wavelength or frequency pulses
can be generated by using localized spatial pulses via a
networks communication system. Quantum codes can be
generated by using a polarization control unit and a beam
splitter, incorporating to the MRRs. Here frequency band
of 10.7 MHz and 16 MHz and wavelengths of 206.9 nm,
1448 nm, 2169 nm and 2489 nm are localized and
obtained and used for quantum codes generation
applicable for secured networks communication.
Keywords- Microring Resonator (MRR); Discrete
Optical Soliton, Quantum Codes, Computer networks
system
Introduction
Optical network is becoming a capable technology for
secured and long distance communication [1].
The use of quantum codes with quantum router and
network has been described well by Amiri et al [2].
Recently, Afroozeh et al [3] have shown that the
continuous wavelength can be generated using a soliton
pulse in an MRR. Kouhnavard et al. have proposed the
use of QKD via quantum wavelength router using spatial
soliton [4]. Nikoukar et al have proposed a system of
optical tweezers generation used for secured binary codes
generation applicable in network systems such as
computer networks [5]. In this study, we are using MRR
system to generate discrete optical soliton. Necessary
frequency bands and wavelengths are selected and can be
used to generate quantum codes propagating inside
network communication systems [6].
Theoretical Modeling
Optical power in the form of an optical soliton pulse
or a laser Gaussian beam are expressed by equations 1
and 2.
ti
L
z
T
T
hAE
D
in 0
0 2
exptan (1)
)(
0
0
exp)( tj
in EtE (2)
A and z are optical field amplitude and propagation
distance, respectively. T is the time of soliton pulse
propagation, where 2
2
0TLD
is the dispersion length
of the soliton pulse and β2 is the propagation constant [7].
Therefore, a soliton pulse describes a pulse, which keeps
its temporal or spatial width invariance while it
propagates inside the MRRs system [8]. Soliton peak
intensity is expressed by 2
02 / T , where =n2×k0, is
the length scale over which dispersive or nonlinear
effects causes the beam to be wider or narrower. For a
temporal soliton pulse in the micro ring device, a balance
should be achieved between the dispersion length (LD)
and the nonlinear length (LNL=(1/γφNL), where γ and φNL
are a coupling loss of the field amplitude and nonlinear
phase shift. Here 00 kLn the linear phase shift [9].
Light transmits within the nonlinear medium wherein the
refractive index (n) is given by [10]:
,)( 2
020 P
A
n
nInnn
eff
(3)
International Journal of Engineering Research & Technology (IJERT)
Vol. 1 Issue 5, July - 2012
ISSN: 2278-0181
1www.ijert.org
2. where n0 and n2 are the linear and nonlinear refractive
indices, respectively. I is the optical intensity and P is the
optical power. The effective mode core area of the device
is shown by Aeff. For the micro ring and nano-ring
resonators, the effective mode core area ranges from 0.50
to 0.1 μm2
[11]. Proposed system can be connected to a
rotatable polarizer and a beam splitter, which is used to
generate distinct optical soliton pulses and quantum
codes with greeter free spectrum range (FSR), shown by
Figure (1).
Fig.1: System of trapping, where PBS; polarizing Beam splitter; Ds,
detectors; Rs, ring radii and κs, coupling coefficients
When the input pulse introduced into the MRRs
system as shown in Fig. 1, the resonant output is built up
in the series of MRRs, where equation (4) can express the
normalized output of the light field [12].
)
2
(sin114)111(
))1(1(
1)1(
)(
)(
22
2
2
xx
x
tE
tE
in
out
(4)
Eq. (4) points that a ring resonator in this exacting
case is comparable to a Fabry-Perot cavity which is
consisting of an input and output mirror with a field
reflectivity, (1- ), and a fully reflecting mirror [13].
is identified as coupling coefficient, and x=exp(−αL/2)
represents a roundtrip loss coefficient [14]. k=2 / is the
wave propagation number, where 00 kLn and
2
2 inNL EkLn are the linear and nonlinear phase shifts
[15]. Equation (4) shows the output power from each ring
resonator, which is realized as input power for the next
ring resonator. Simulation results of the mathematical
equations provide applicable optical soliton pulses to
generate quantum codes, used for the secured networks
communication.
Results and Discussion
Large bandwidth of signals is generated, where the
next ring resonators within the system form the chaotic
filtering characteristics of the signals. Using the
semiconductor material, InGaAsP/InP, the specified
frequency bands are obtained based on selected ring
parameters. The soliton waveform with central frequency
of f0 = 20 MHz is input into the first MRR.
The optical power is fixed to 550 mW, where n0=3.34,
n2=2.2×10−17
m2
W−1
, Aeff=0.50 μm2
, α=0.5 dB mm−1
,
γ=0.1, with 20,000 roundtrips. The chaotic signals are
generated within the first ring (R1), where the broad
frequency band is observed in ring R2. The filtering
signals are seen in rings R3 and R4. Fig. 2 shows the map
of the simultaneous frequencies generation, for the ring
parameters of R1=10 μm, κ1=0.9713, R2=10 μm,
κ2=0.973, R3=10 μm, κ3=0.9732, R4=15 μm, and
κ4=0.9786.
Fig. 2: Specific frequencies trapping, (a) noisy chaotic signals, (b)
frequency bands, (c) filtering signals, (d) discrete signals.
Discrete frequency bands from 10 MHz to 30 MHz
can be simultaneously generated, where the specified
frequencies are filtered to form the required link
converters. Fig. 3 shows the frequency profile generated
for a down-link converter.
Fig. 3: Frequency band generation, (a) chaotic signals,(b) frequency
bands, (c) filtering signals, (d) signal at 10.7 MHz.
Fig. 4 shows the frequency generation for an up-link
converter.
International Journal of Engineering Research & Technology (IJERT)
Vol. 1 Issue 5, July - 2012
ISSN: 2278-0181
2www.ijert.org
3. Fig. 4: Frequency band generation, (a) chaotic signals, (b) frequency
bands, (c) filtering signals, (d) signal at 16 MHz.
Wide range of spread wavelength can be generated,
using proposed MRRs system, where the wavelength
multiplexing, dense wavelength divisions multiplexing
(DWDM) can be perform via optical wireless link [16]. In
principle, the specific wavelength mode is required in this
technique; therefore, the chaotic signals are needed to be
generated within the proposed [17]. In this case, the input
power is in the form of Gaussian beam and it is given by
Equation (2).
Gaussian pulse is input into the first MRR as shown in
Fig.5, where light modes can be generated with smaller
spectral width than the input pulse. The optical filter
characteristics is perform using appropriate ring
parameters such as input power and, ring material,
refractive index, radius and coupling constant, etc [18].
Thus, Gaussian pulse with power of 450 mW and central
wavelength of λ0=1500 nm is input into the system, where
n2=2.2×10−15
m2
W−1
and Aeff = 25 μm2
.
Figure (5) shows the trapping of wavelength pulses,
obtained by using the MRRs system. Discrete
wavelengths of λD=1448 nm and λU=2169 nm with
powers of 592.6 mW and 394.6 mW are generated
respectively. Here, the ring radii, R1, R2, R3 and R4 are 17,
13, 14 and 14 µm respectively. The coupling constants κ1,
κ2, κ3, κ4 are selected to 0.995, 0.9831, 0.985 and 0.9826,
respectively.
Fig.5: Wavelengths trapping, where (a): chaotic signals from R1, (b):
filtering by R2, (c): wavelength trapping by R3, (d) localized wavelengths
at λD=1448 nm and λU=2169 nm with powers of 592.6 mW and 394.6
mW respectively.
Figure (6) shows the filtering of chaotic signal, where
the discrete wavelengths of λD=206.9 nm and
λU=2489 nm with powers of 760.5 mW and 962.3 mW
are generated respectively. Here, the coupling constants
κ1, κ2, κ3 and κ4 of the rings have been selected to 0.9895,
0.9858, 0.9858 and 0.9713, respectively.
Fig.6: Wavelengths trapping, where (a): chaotic signals from R1, (b):
filtering by R2, (c): wavelength trapping by R3, (d) localized
wavelengths at λD=206.9 nm and λU=2489 nm with powers of 760.5
mW and 962.3 mW respectively.
Obtained results of discrete wavelengths or
frequencies from MRRs system can be passed through a
PBS as shown in Figure (1). In application, the variable
quantum codes can be generated using the PBS.
Localized wavelength or frequency can be used to
generate variable quantum codes. In this concept, we
assume that the polarized photon can be performed by
using the proposed arrangement. Optical codes via
localized optical solitons can be connected into a network
communication system shown in Fig.7. Therefore,
generated secured optical codes can be transmitted to the
different users via a networks transmitter system [19].
International Journal of Engineering Research & Technology (IJERT)
Vol. 1 Issue 5, July - 2012
ISSN: 2278-0181
3www.ijert.org
4. Fig.7: Networks communication system, where the transmission of
information can be implemented using generated optical codes
The security code can be formed by the spatial soliton
pulses generation using an analog to digital electronic
convertor system. Furthermore, the applications such as
quantum repeater, quantum entangled photon source are
available, which can complete the concept of quantum
optical communication networks.
Conclusion
A system of MRRs was presented in which, secured
optical codes can be performed and transmit via a
network system. MRR system is connected to a rotatable
polarizer and a beam splitter, where this system can be
used to generate localized optical soliton pulses
applicable in public network systems. In this study,
localized optical pulse with frequencies of 10.7 MHz and
16 MHz and wavelengths of 206.9 nm, 1448 nm, 2169
nm and 2489 nm are simulated. Further, more frequency
and wavelength bands are available for many applications
in networks communication.
Acknowledgement
We would like to thank the Institute of Advanced
Photonics Science, Nanotechnology Research Alliance,
Universiti Teknologi Malaysia (UTM).
References
[1]. I. S. Amiri, A. Afroozeh, I.N. Nawi, M.A. Jalil, A.
Mohamad, J. Ali, P.P. Yupapin. Dark Soliton Array for
communication security, (2011) Procedia Engineering, 8, pp.
417-422.
[2]. I. S. Amiri, M.H. Khanmirzaei, M. Kouhnavard, P.P.
Yupapin, J. Ali. Quantum Entanglement using Multi Dark
Soliton Correlation for Multivariable Quantum Router. Nova
Science Publisher, 2011.
[3]. Abdolkarim Afroozeh, Iraj Sadegh Amiri, Muhammad Arif
Jalil, Mojgan Kouhnavard, Jalil Ali, Preecha Yupapin. Multi
Soliton Generation for Enhance Optical Communication,
Applied Mechanics and Materials, Vol. 83 (2011), pp 136-
140
[4]. M. Kouhnavard, I. S. Amiri, A. Afroozeh, M. A. Jalil, J. Ali
and P. P Yupapin. QKD Via a Quantum Wavelength Router
using Spatial Soliton, AIP Conf. Proc. 1341, 210-216 (2011)
[5]. A. Nikoukar, I. S. Amiri, J. Ali. Secured Binary Codes
Generation for Computer Network Communication, 2nd
Annual International Conference on Network Technologies
& Communications (NTC 2011), publishing progress.
[6]. C. Teeka, S. Songmuang, R. Jomtarak, P. P. Yupapin, M. A.
Jalil, I. S. Amiri, and J. Ali. ASK-to-PSK Generation based
on Nonlinear Microring Resonators Coupled to One MZI
Arm, AIP Conf. Proc. 1341, 221-223 (2011)
[7]. A. Afroozeh, I. S. Amiri, M. Bahadoran, J. Ali & P. P.
Yupapin. Simulation of Soliton Amplification in Micro Ring
Resonator for Optical Communication, Jurnal Teknologi, 55
(2011), 271–277.
[8]. A. Afroozeh, I. S. Amiri, J. Ali And P. P. Yupapin.
Determination of FWHM for Soliton Trapping, Jurnal
Teknologi, 55 (2011), 77–83.
[9]. C. Tanaram , C. Teeka, R. Jomtarak, P. P. Yupapin, M. A.
Jalil, I. S. Amiri and J. Ali. ASK-to-PSK Generation based
on Nonlinear Microring Resonators Coupled to One MZI
Arm, (2011) Procedia Engineering, 8, pp. 432-435.
[10]. I. S. Amiri, K. Raman, A. Afroozeh, M.A. Jalil, I.N. Nawi, J.
Ali, P.P. Yupapin. Generation of DSA for Security
Application, (2011)
Procedia Engineering, 8, pp. 360-365.
[11]. N. Suwanpayak, S. Songmuang, M. A. Jalil, I. S. Amiri, I.
Naim, J. Ali and P. P. Yupapin. Tunable and Storage
Potential Well Using Microring Resonator System for Bio-
Cell Trapping and Delivery, AIP Conf. Proc. 1341, 289-291
(2011)
[12]. I. S. Amiri, A. Afroozeh, M. Bahadoran. Simulation and
Analysis of Multi Soliton Generation Using a PANDA Ring
Resonator System, CHIN.PHYS. LETT. Vol. 28, No. 10
(2011) 104205,
[13]. I. S. Amiri, A. Afroozeh, J. Ali And P. P. Yupapin.
Generation of Quantum Codes Using Up and Down Link
Optical Soliton, Jurnal Teknologi, 55 (2011), 97–106.
[14]. Muhammad Arif Jalil, Iraj Sadegh Amiri, Chat Teeka, Jalil
Ali, P. P. Yupapin. All-optical Logic XOR/XNOR Gate
Operation using Microring and Nanoring Resonators, Global
Journal of Physics Express, Volume 1, Issue 1, 2011, 15-22.
[15]. A. Afroozeh, I. S. Amiri, M. Kouhnavard, M. A. Jalil, J. Ali,
and P.P. Yupapin. Optical Dark and Bright Soliton
Generation and Amplification, AIP Conf. Proc. 1341, 259-
263 (2011)
[16]. P.P. Yupapin, M. A. Jalil, I. S. Amiri, I. Naim, J. Ali. New
Communication Bands Generated by using a Soliton Pulse
within a Resonator System, Circuits and Systems, 2010, 1,
71-75
[17]. I. S. Amiri, J. Ali, P.P. Yupapin. Enhancement of FSR and
Finesse Using Add/Drop Filter and PANDA Ring Resonator
Systems, International Journal of Modern Physics B, Vol. 25,
No. 00 (2011) 1–13
[18]. I. S. Amiri, A. Afroozeh, M. Bahadoran, J. Ali & P. P.
Yupapin. Molecular Transporter System for Qubits
Generation, Jurnal Teknologi, 55 (2011), 155–165.
[19]. I. S. Amiri, A. Nikoukar, J. Ali. Quantum Information
Generation Using Optical Potential Well, 2nd Annual
International Conference on Network Technologies &
Communications (NTC 2011), publishing progress.
International Journal of Engineering Research & Technology (IJERT)
Vol. 1 Issue 5, July - 2012
ISSN: 2278-0181
4www.ijert.org