The document provides information about the FlightFX SF50 Vision Jet G2 for Microsoft Flight Simulator, including:
- An overview of the aircraft, its specifications, performance capabilities, and interesting facts about the real plane.
- Descriptions of the flight deck instruments and controls, including the Garmin G3000 avionics with custom pages added.
- Sections on the aircraft settings, flying tips, and tables of contents for other sections of the manual.
1) An agency relationship is created between a principal and agent through express or implied agreement. The principal must have the legal capacity to enter into a contract.
2) An agent acts on behalf of the principal and their actions can legally bind the principal. The principal maintains control and supervision over the agent.
3) A principal can become liable for unauthorized actions of an agent if the principal's words or conduct led a third party to reasonably believe the agent had authority. Ratification by the principal after the fact can also create an agency relationship retroactively.
contract labor act 1970 includes all the information related to it with examples , sections ,penalties and procedures
it includes also about amendment in contract labor act
1) An agency relationship is created between a principal and agent through express or implied agreement. The principal must have the legal capacity to enter into a contract.
2) An agent acts on behalf of the principal and their actions can legally bind the principal. The principal maintains control and supervision over the agent.
3) A principal can become liable for unauthorized actions of an agent if the principal's words or conduct led a third party to reasonably believe the agent had authority. Ratification by the principal after the fact can also create an agency relationship retroactively.
contract labor act 1970 includes all the information related to it with examples , sections ,penalties and procedures
it includes also about amendment in contract labor act
This document summarizes the laws relating to the carriage of goods by air. It discusses the key international treaties that govern air transport, including the Warsaw Convention of 1929, Hague Protocol of 1955, Montreal Convention of 1999. It also defines important terms like high contracting party and international carriage by air. The document outlines the documentation responsibilities of carriers, including requirements for air waybills, passenger tickets, and baggage checks. Finally, it discusses carrier liabilities and limitations on liability amounts for death, injury, delay or loss of passengers and cargo.
Industrial relation and employee relation Shristhi Gupta
The document discusses industrial relations, which refers to the relationships within an industry between employers and employees. It notes that healthy relationships between all individuals in an organization are important for optimal performance. Specifically, employee relations concern the interactions among workers in a company. Some key aspects of industrial relations mentioned include participative management, collective bargaining, labor legislation, and the roles of trade unions and employers' organizations.
The document discusses various topics related to contracts of agency and guarantee. It defines an agent as a person employed to do acts for another or represent another in dealings with third parties. The key parties in a contract of agency are the principal and agent. It outlines the duties and rights of both the principal and agent. It also discusses special contracts, classification of agents, and the duties of the principal towards the agent and third parties. The document defines contracts of indemnity and guarantee and compares the differences between the two. It concludes with explanations of lien, lienholder, and the different types of liens.
aspetti pratici per valutare i rischi e gestire il relativo documentoCorrado Cigaina
un'analisi sul modo di operare per valutare correttamente tutti i rischi per la sicurezza e la salute dei lavoratori e per redigere, impelmentare e mantenere attivo nel tempo il documento di valutazione di cui agli art. 28 e29 D.Lgs 81/08. aggiornata ad ottobre 2015.
The document discusses various types of employee separation including resignation, termination, and absconding. It outlines the processes involved in resignation, including exit interviews and relieving duties. It also covers the procedures for termination, such as documenting performance issues, warnings, and terminating access. The objectives of performance appraisal and characteristics of an effective appraisal system are also summarized.
In questa presentazione (convegno presso Unione Industriale Savona nel febbraio 2016) si descrive l'importanza della cultura di sicurezza, di illustrano due sistemi per l'analisi della cultura di sicurezza, e si evidenziano le principali azioni e approcci per il miglioramento della cultura di sicurezza.
Laws regulating women working in night shiftsAsrar Mohd
Nightshifts have been in existence for a long time; however for India it was only recently through an amendment to the Factories Act 1948 that it was allowed under the law for women to work nightshifts.
This document summarizes key provisions related to contracts of indemnity, guarantee, and bailment under Indian contract law.
It explains that a contract of indemnity involves two parties where one promises to save the other from loss caused by the promisor or a third party. A contract of guarantee involves three parties - a principal debtor, a creditor, and a surety who guarantees the debt of the principal debtor.
The document also outlines the duties of bailors and bailees. A bailment involves the delivery of goods by one person to another for a specific purpose, with an obligation to return the goods. Bailees have a duty to take reasonable care of bailed goods, while bail
Este documento define la responsabilidad y el anonimato. Explica que la responsabilidad implica cumplir con obligaciones y asumir las consecuencias de los actos, mientras que el anonimato se refiere a ocultar la identidad de una persona u organización. También describe algunos tipos de responsabilidad como la social, civil y ambiental, e identifica ventajas como mejorar la toma de decisiones y las relaciones, además de consecuencias de falta de responsabilidad como problemas legales.
Slide del seminario "GIOCHI PER LA FORMAZIONE" Seminario dell'associazione Formatori Professionisti, Tenutosi a Napoli a luglio 2009.
Il seminario, rivolto per lo più a formatori e coach, ha affrontato il tema del gioco come strumento a disposizione dell'educatore e del formatore.
Le Slide solo quelle utilizzate nel corso dell'intervento di Luciano Cassese.
Il Gioco viene presentato come strumento e metafora dell'apprendimento. Volutamente le slide presentano tante immagini e poco testo in quanto Sono servite come un semplice supporto al discorso sui giochi e erano finalizzate a stimolare il canale visivo e immaginazione della platea.
Carenado developed the highly detailed Cessna T210M Centurion aircraft add-on for FSX. The virtual cockpit is extremely detailed with realistic 3D instruments and clickable switches. The exterior model also has astonishing detail down to tiny screws and rivets. Flight tests show the aircraft has realistic flight dynamics that match specifications for the real T210M. The package includes five paint schemes and provides smooth animations and 30 FPS performance, making it a unique and realistic general aviation aircraft for FSX.
- The company is an investment grade rated global aerospace company established in 1969 and privatized in 1994, manufacturing commercial, executive and defense aircraft.
- It has a strong financial position with a net cash balance and generates revenue from commercial and executive jet sales as well as defense contracts.
- The company has a global footprint with factories, offices and service centers across North and South America, Europe, Asia, Africa and the Middle East.
This document summarizes the laws relating to the carriage of goods by air. It discusses the key international treaties that govern air transport, including the Warsaw Convention of 1929, Hague Protocol of 1955, Montreal Convention of 1999. It also defines important terms like high contracting party and international carriage by air. The document outlines the documentation responsibilities of carriers, including requirements for air waybills, passenger tickets, and baggage checks. Finally, it discusses carrier liabilities and limitations on liability amounts for death, injury, delay or loss of passengers and cargo.
Industrial relation and employee relation Shristhi Gupta
The document discusses industrial relations, which refers to the relationships within an industry between employers and employees. It notes that healthy relationships between all individuals in an organization are important for optimal performance. Specifically, employee relations concern the interactions among workers in a company. Some key aspects of industrial relations mentioned include participative management, collective bargaining, labor legislation, and the roles of trade unions and employers' organizations.
The document discusses various topics related to contracts of agency and guarantee. It defines an agent as a person employed to do acts for another or represent another in dealings with third parties. The key parties in a contract of agency are the principal and agent. It outlines the duties and rights of both the principal and agent. It also discusses special contracts, classification of agents, and the duties of the principal towards the agent and third parties. The document defines contracts of indemnity and guarantee and compares the differences between the two. It concludes with explanations of lien, lienholder, and the different types of liens.
aspetti pratici per valutare i rischi e gestire il relativo documentoCorrado Cigaina
un'analisi sul modo di operare per valutare correttamente tutti i rischi per la sicurezza e la salute dei lavoratori e per redigere, impelmentare e mantenere attivo nel tempo il documento di valutazione di cui agli art. 28 e29 D.Lgs 81/08. aggiornata ad ottobre 2015.
The document discusses various types of employee separation including resignation, termination, and absconding. It outlines the processes involved in resignation, including exit interviews and relieving duties. It also covers the procedures for termination, such as documenting performance issues, warnings, and terminating access. The objectives of performance appraisal and characteristics of an effective appraisal system are also summarized.
In questa presentazione (convegno presso Unione Industriale Savona nel febbraio 2016) si descrive l'importanza della cultura di sicurezza, di illustrano due sistemi per l'analisi della cultura di sicurezza, e si evidenziano le principali azioni e approcci per il miglioramento della cultura di sicurezza.
Laws regulating women working in night shiftsAsrar Mohd
Nightshifts have been in existence for a long time; however for India it was only recently through an amendment to the Factories Act 1948 that it was allowed under the law for women to work nightshifts.
This document summarizes key provisions related to contracts of indemnity, guarantee, and bailment under Indian contract law.
It explains that a contract of indemnity involves two parties where one promises to save the other from loss caused by the promisor or a third party. A contract of guarantee involves three parties - a principal debtor, a creditor, and a surety who guarantees the debt of the principal debtor.
The document also outlines the duties of bailors and bailees. A bailment involves the delivery of goods by one person to another for a specific purpose, with an obligation to return the goods. Bailees have a duty to take reasonable care of bailed goods, while bail
Este documento define la responsabilidad y el anonimato. Explica que la responsabilidad implica cumplir con obligaciones y asumir las consecuencias de los actos, mientras que el anonimato se refiere a ocultar la identidad de una persona u organización. También describe algunos tipos de responsabilidad como la social, civil y ambiental, e identifica ventajas como mejorar la toma de decisiones y las relaciones, además de consecuencias de falta de responsabilidad como problemas legales.
Slide del seminario "GIOCHI PER LA FORMAZIONE" Seminario dell'associazione Formatori Professionisti, Tenutosi a Napoli a luglio 2009.
Il seminario, rivolto per lo più a formatori e coach, ha affrontato il tema del gioco come strumento a disposizione dell'educatore e del formatore.
Le Slide solo quelle utilizzate nel corso dell'intervento di Luciano Cassese.
Il Gioco viene presentato come strumento e metafora dell'apprendimento. Volutamente le slide presentano tante immagini e poco testo in quanto Sono servite come un semplice supporto al discorso sui giochi e erano finalizzate a stimolare il canale visivo e immaginazione della platea.
Carenado developed the highly detailed Cessna T210M Centurion aircraft add-on for FSX. The virtual cockpit is extremely detailed with realistic 3D instruments and clickable switches. The exterior model also has astonishing detail down to tiny screws and rivets. Flight tests show the aircraft has realistic flight dynamics that match specifications for the real T210M. The package includes five paint schemes and provides smooth animations and 30 FPS performance, making it a unique and realistic general aviation aircraft for FSX.
- The company is an investment grade rated global aerospace company established in 1969 and privatized in 1994, manufacturing commercial, executive and defense aircraft.
- It has a strong financial position with a net cash balance and generates revenue from commercial and executive jet sales as well as defense contracts.
- The company has a global footprint with factories, offices and service centers across North and South America, Europe, Asia, Africa and the Middle East.
Skyservice is proud to feature this well-maintained, and professionally operated 1991 Bombardier Challenger 601-3A/ER. Aircraft engines and APU enrolled in JSSI. The aircraft also features a beautifully appointed ten-passenger executive interior done in 2011, with WiFi ATG5000 and cabin entertainment system.
- The document describes a Zonk Air Charters flight 330L that crashed on November 7, 2010 after departing Lake Tahoe Airport. The aircraft was a 1980 PA-31-310 with 1 pilot and 4 passengers onboard. All 5 people died in the crash.
- Investigation of the wreckage found evidence that the right engine was producing power on impact while the left engine was not running. The fuel line showed no integrity issues. Cockpit instruments were destroyed making the cause difficult to determine.
A flying car project by retired Air Force pilot-engineer Rich Strong intended for frequent regional business travellers. The design features automotive features and aviation features with automatic transformation. The project is in the full-size model phase.
The document provides information about safely operating the Phantom 3 Professional drone. It outlines important documents to read before first flight, recommends watching tutorial videos, and provides an overview of the aircraft components and functions of the flight controller, Return-to-Home system, Vision Positioning System, and Intelligent Flight Battery. It also summarizes the key components and controls of the remote controller.
Lockheed Martin F35 Lightning II(Aerodynamics Presentation)SYEDMOEEDHUSSAIN1
Note: For best experience of animation, Proceed in Slide Show Mode Of MS Power Point
Lockheed Martin F35 Lightning II's
1. Brief History
2. Dimensions
3. Concept of Shockwave
4. Drag Coefficient
5. Reynold’s Number
6. Features
7. Capabilities
Magic Edge Flight Amusement Center in Mountain View, California has become a popular attraction for technology workers to experience realistic flight simulations. The center transports visitors to a virtual world where they can pilot high-tech fighter jets in combat missions and dogfights. Pilots strap into full-motion simulators and wear headsets to communicate as they try to shoot down enemies and complete objectives. The intense virtual reality experience provides an adrenaline rush and helps employees relieve stress from their high-pressure tech jobs. The center has attracted over 40,000 members since opening and hosted corporate events for companies like Hewlett-Packard.
Apresentação Institucional - Abril - InglêsEmbraer RI
This document provides an overview of Embraer S.A., a Brazilian aerospace conglomerate. It discusses Embraer's history and evolution, operational facilities around the world, product lines including commercial and executive aircraft as well as defense systems, technologies, environmental initiatives, financial performance, and employee benefits.
FIA16: Leonardo Aircraft Division: M-346 programme - the dual role conceptLeonardo
During 2016 edition of the Farnborough Airshow, Leonardo Aircraft Division presented the M-346FT (Fighter Trainer), the latest variant of the platform, ideal to train next generation of fighter pilots
Private Jet For Sale: 1981 Cessna Citation II - SkyserviceKimberley Coughlin
Beautiful 1981 Cessna Citation II. 8200.1 total flight time on aircraft. Always professionally flown. This aircraft is equipped with Collins avionics, NewFlight Inc. increased gross weight, thrust reversers, and much more.
Experience Mazda Zoom Zoom Lifestyle and Culture by Visiting and joining the Official Mazda Community at http://www.MazdaCommunity.org for additional insight into the Zoom Zoom Lifestyle and special offers for Mazda Community Members. If you live in Arizona, check out CardinaleWay Mazda's eCommerce website at http://www.Cardinale-Way-Mazda.com
This document provides an overview of Embraer, a Brazilian aerospace conglomerate. It discusses Embraer's origins and evolution, technological capabilities, global presence and workforce, commercial and defense aircraft product lines, environmental initiatives, financial performance, and investments. Key information includes Embraer's privatization in 1994, over 16,000 employees in Brazil, commercial aircraft families like the ERJ 145 and E-Jet E170/E190, defense programs including the Super Tucano and KC-390, and annual revenues of over $4 billion US dollars primarily from exports.
This document provides an overview of Embraer, a Brazilian aerospace conglomerate. It discusses Embraer's origins and evolution, technological capabilities, global presence and workforce, commercial and defense aircraft product lines, environmental initiatives, financial performance, and investments. Key information includes Embraer's privatization in 1994, over 16,000 employees in Brazil, commercial aircraft families like the ERJ 145 and EMBRAER 170/190, defense programs including the Super Tucano and KC-390, and environmental leadership as the first company to certify an aircraft powered by biofuels.
- The company is a global aerospace leader established in 1969 and privatized in 1994, with investment grade ratings and a strong balance sheet.
- It has a broad portfolio of commercial, executive and defense aircraft as well as aviation services, with over 3,000 aircraft delivered to over 100 countries.
- For 2011, the company estimates net revenue of $5.8 billion, with commercial aviation contributing over half of total revenue.
- The company has a strong financial position with investment grade ratings and a net cash position. It has a global footprint with operations across Brazil, US, Europe, and Asia serving commercial, executive, and defense aviation segments.
- It has a diversified portfolio of commercial and executive aircraft as well as defense products. The commercial jet backlog remains strong at $15.3 billion despite 154 aircraft delivered so far in 2010.
- Financial results for the period showed stable net cash position, EBIT of $63 million, and net income of $98.5 million. Firm order backlog and revenues remained stable.
WR-ALC Malfeasance ref the F-15 Canopy Sill LongeronRichard Gomez
This is the presentation that I sent to the U.S. Congress as malfeasance evidence at WR-ALC. My intent is to prevent another tragedy like the KC-130T fatal, Class A mishap on 10 July 2017, near Itta Bena, Mississippi. It lays everything out. My articles will support the presentation. Take it seriously..!
- The company is an investment grade-rated global aerospace company established in 1969 and headquartered in Brazil.
- It has a strong balance sheet and is a leader in commercial, executive and defense aviation with aircraft, services and systems.
- The company has a global footprint with operations in Brazil, USA, Europe and Asia and is forecasting 2011 revenues between $5.6-5.8 billion.
The document provides an overview of unmanned aerial vehicles (UAVs), including their history, classification, key elements, applications, and advantages/disadvantages. It discusses the evolution of UAVs from World War I to modern systems. UAVs are classified by platform, size/endurance, and altitude. The key elements of a UAV system are the airframe, propulsion, sensors, payload, and ground control station. A case study of the Predator C Avenger UAV highlights its specifications and performance. Applications of UAVs include remote sensing, surveillance, transport, search and rescue, and armed attacks.
The document describes using aircraft modelling software to simulate a plane crash accident involving a Piper PA-31-325 Navajo. The objectives were to model the roll, pitch, yaw and flight path resulting from detachment of the left wing. The software was used to build an aerodynamic model of the Navajo using collected geometry and performance data. Tests were run detaching the wing and applying detachment forces to match investigator findings and evaluate pilot experience. The model supported and supplemented the accident evidence.
Similar to Flight FX - SF50 Vision Jet Flight Manual MSFS2020 [V4] (20)
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...amsjournal
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
3. 3
FlightFX is a multi-cultural, multi-
lingual group with individuals from
around the world. We have worked
tirelessly to bring this product to life
inside of MSFS2020.
Without customers and loyal fans like you
we couldn’t do what we do. We
wholeheartedly appreciate your patronage
and look forward to seeing all of you in
the virtual skies!
Thank You
F R O M F L I G H T F X
4. 4
Beta Team
S P E C I A L T H A N K S
Akil (Awemeter)
Les O’Rielly
Zach Bartig (Zachb)
Tim Morgan (Stretch
(N300DG))
Armando Heredia
(Casualclick)
Gabe King (Waffler11)
John White (dihedral)
Bill Leeman (Bleeman)
K. Brennan (d3l74m00)
Blueporpoise
Stoladdict
Tmangolfkid
Gadfly
Naughtygnome
Elon Kerman
Mazeltovcocktails
Monstermatti
Bazzys
Calderonwestley
Twotonemurphy
Theflyingfabio
Cargoluxpilot
Without strong
feedback, guidance
and support from our
Beta team none of
this would be
possible.
5. 5
Flight
Crew
F L I G H T M A N U A L
Nick Sdoucos
Chief Executive
Officer
Luk Lew
SF50 Flight
Modeling/Systems
Lead
Thomas Livings
Chief Design
Officer
Lio Crayssac
Lead Visual
Artist
Peter Vasilion
Chief Operating
Officer
Boris Vanian
Lead Audio
Developer
Jordan Ryan
Chief Technology
Officer
Meet the team responsible
for bringing you the SF50
Vision Jet to Microsoft
Flight Simulator.
6. 6
Table Of
Contents
F L I G H T M A N U A L
01 02 03
05 06
Legal
Disclaimer
Some stuff from
our lawyers.
Aircraft
Overview
Getting to know
the SF50.
Settings
Bindings and
Recommendations
for your sim while
using the SF50.
Flight
Deck
Learning your way
around the
controls and
systems.
Flying
Tips
Some recos from
the team on
getting the best
experience.
8. 8
Disclaimer
0 1
All information contained in this document is exclusively for use within Microsoft Flight Simulator and should not be interpreted
as a replacement or supplement for any of the manufacturer supplied operating manuals for real-world operation.
Flight FX LLC waive any responsibility for damages that may be caused from the use of this document outside of Microsoft Flight
Simulator.
This is a living, breathing document. It should be noted that this can be edited and or updated at any time and may not
immediately reflect any changes or updates to the aircraft in the sim. It is further understood that errors and typos can happen.
If something is not right please contact us at any time and report your findings via our discord channel at
https://discord.gg/BfWKkJS3ET
10. 10
Interesting Facts
A I R C R A F T O V E R V I E W
The aircraft has won several awards including the Robert J.
Colier trophy in 2017, the Flying Editors Choice Award in
2017, de:Fliegermagazin’s Best Plane of the Year 2017,
Plane and Pilot Plane of the Year 2017, Popular Science’s
100 Greatest Innovations of 2017, and Flying’s Innovation
Award for 2018.
The real life aircraft currently contains three operational
versions, the base model, G2 and the G2+ variants. Only
the G2+ and late model G2 variants come equipped with the
now famous Autoland and CAPS systems.
The aircraft was originally designed to cater to the
personal use crowd and not intended to be a part of the
corporate aviation scene. It offered pilots of other high
performance aircraft such as the SR20 and SR22 a chance to
“step up” to a jet. However, its functionality and ease of
use ended up fitting many corporate and air taxi
operational missions.
The SF50 has an estimated life expectancy of 12,000
airframe hours and is the first jet aircraft to come with a
ballistic parachute.
11. 11
Interesting Facts
Cont.
A I R C R A F T O V E R V I E W
All real life SF50 purchases come with complimentary flight
training at the training center in Knoxville, TN
The famed CAPS system has only been used twice in real
life. Both time occurring within a few month of each other
in 2022. The first, outside of Orlando, FL and the second,
outside of Indianapolis, IN.
The SF50 is the world's first single-engine private jet,
and the first jet to ever come with the Autoland feature
from Garmin.
As of the time of writing this, over 400 Vision Jets have
been delivered to owners around the world.
The SF50 was originally inspired by the 1988 propeller
homebuilt VK-30 from which a turboprop prototype was
developed.
12. 12
Operational
Range
A I R C R A F T O V E R V I E W
Although not exact we at FlightFX have done our best to
simulate the real life SF50’s range capabilities under
different loads and weather conditions. These are best
efforts and should not be construed as exact as there are
many limitations and differences between real life and
simulated flight.
Average Range 950 NM
Max Range 1,275 NM
13. 13
Interiors
A I R C R A F T O V E R V I E W
The SF50 Vision Jet comes with three
interchangeable interiors. The center
console is not permitted in any
configuration with rear seating due to
safety guidelines.
Capturing the
Perfect Image
Family
7 Seat combination with
slightly narrower main
row seating and
armrests.
Complete
7 Seat combination with
slightly larger main
row seating and no
armrests.
Executive
2 Seat combination with
slightly larger main
row seating and
removable center
console.
14. 14
Dynamic
Registration
System
I N T R O D U C T I O N
The aircraft is setup with a dynamic registration system built for a maximum of 6 characters.
• You will be able to see these in the following areas:
• On the custom airplane storage cover
• On the aircrafts wheel chocks
• On the registration certificate inside the aircraft
• In the top corner of the PFD
15. 15
Specification
s
A I R C R A F T O V E R V I E W
Vision Jet G2
Weight
Maximum Ramp Weight 6,040 lbs (2,740
kg)
Maximum Takeoff Weight 6,000 lbs (2,727
kg)
Basic Empty Weight 3,550 lbs (1,610
kg)
Max Zero Fuel Weight 4,900 lbs (2,223
kg)
Maximum Usable Fuel 2,000 lbs (907 kg)
Engine
Manufacturer
Williams International
Model FJ33-5A
Thrust ~1,846 lbs
Dimensions
Wingspan 38.7 ft (11.79 m)
Length 30.7 ft (9.42 m)
Height 10.9 ft (3.32 m)
Cabin Width 5.1 ft (1.56 m)
Cabin Height 4.1 ft
(1.24 m)
Performance
Takeoff 2,036 ft (620 m)
Takeoff Over 50 ft Obstacle 3,192
ft (973 m)
Climb Rate 1,609 ft/min
Max Operating Altitude 31,000 ft
Stall Speed with Flaps 67 knots
Max Cruise Speed 311 KTAS
17. 17
At-A-Glance
F L I G H T D E C K
1. The Working Title G3000
2. Flight Deck Controls/Panels/Switches
1. Primary Flight Display
1. Additional Controls
2. Multi Function Display
1. Synoptic Pages
3. Bolster Switch Panel
1. Bat/Gen Switches
2. Light Switches
3. Master Oxygen Switch
4. Fresh Air/Bleed Air Switch
5. Probe Heat Switch
6. De-Ice System Switches
4. Garmin Touch Screen Controllers
1. Initialization Pages
2. CAS Messages and Warnings
3. Virtual Aircraft Management System
5. Environmental Control Panel
6. Engine Start Panel
7. Parking Brake
8. Auto Pilot Control Panel
9. Auto Throttle Control Panel
10.Fuel Control Panel
11.Courtesy Lighting Controls
12.Hobbs Meter
13.Exterior Door Handle
14.Drop Down Entertainment System
18. 18
The Working Title
G3000
F L I G H T D E C K
The Cockpit Management System for the Vision Jet G2
utilizes the most current version of the Working Title
G3000 for Microsoft Flight Simulator.
The Cockpit Management System is currently the closest
thing to the actual Garmin system that exists in the real
life aircraft. As of the time of this publication this
system is being updated and rebuilt by the team at Working
Title. For more information on its progress you can join
their Discord channel here. https://discord.gg/xYS63VMxC7
We have augmented and added many custom features to this
system and we will be covering the operation of many of
those enhancements in the following pages. It should be
noted that there will be several features that will be
updated once the new version is introduced.
Furthermore, the purpose of this section is to give you a
better understanding of the basics and the enhancements
made specifically for the Vision Jet G2. For a more in
depth understanding of how the G3000 works, or pilotage
related questions, you will find several resources
available on both YouTube and by visiting the Working Title
Discord channel.
What We Will Be Covering
19. F L I G H T
D E C K
Finding your way around
the cockpit.
20. 20
1 2
3
4
6 7 8
9
10
1. Primary Flight Display (PFD)
2. Multi Function Display (MFD)
3. Bolster Switch Panel
4. Garmin Touch Screen Controller
(TSC)
5. Environmental Control Panel
6. Engine Start Panel
7. Parking Brake
8. Autopilot Control Panel
9. Auto Throttle Control Panel
10. Fuel Control Panel
5
21. 21
1. Primary Flight
Display (PFD)
F L I G H T D E C K
The PFD contains the most critical information the pilot
needs to operate the aircraft, such as your speed
indicator, heading indicator, artificial horizon and so
on. The Vision Jet contains custom CAS and Warning
messages which can be found on the right-hand side of
this display. In addition we have added a radio
frequency identifier that can be found in the upper right
corner. This will show you who you are talking to.
Currently functionality is only limited to non-center
frequencies.
22. 22
Between the PFD and MFD you will find
the barometric pressure control knob,
the landing gear handle, the checklist
scroll wheel, and the instrument
panel/glare shield light control knob.
Additional
Controls
F L I G H T D E C K
23. 23
2. Multi Function
Display (MFD)
F L I G H T D E C K
The MFD contains a multitude of additional information
for the pilot, including navigational/weather/terrain
maps, Engine Indication System (EIS), Checklists,
Synoptic Pages, and Navigational Charts (with Navigraph
subscription). FlightFX has added numerous custom pages
specific to the Vision Jet that can be displayed here on
the MFD.
24. 24
The EIS contains important information
on engine/thrust performance, fuel flow,
battery charge, landing gear, pitch and
roll trim, flaps status, and cabin
pressure.
2.1 Engine
Indication
System (EIS)
F L I G H T D E C K
25. 25
The real aircraft has over 50 + situational checklists
for various situations. We have included 14 of the most
common and typical checklists a simmer would
realistically use.
Checklists can be accessed via the checklist scroll wheel
under the landing gear handle or through the middle and
right Garmin Touch Screen Controllers within the MFD
tabs.
To operate the checklist you can scroll from item to item
using the scroll wheel. To “check” an item depress the
scroll wheel once and it will move to the next item.
Please note that checklist pages are only available on
MFD at this time. Additionally, they can only be shown
2.2 Checklists
F L I G H T D E C K
26. 26
2.3 Synoptic Pages
F L I G H T D E C K
The Synoptic Pages’ sole function is to provide the flight crew with real-time
information about the status of the aircraft's various systems and functions.
To activate the Synoptic Pages you must navigate through the MFD page in the
GTC. You will find a button called “Aircraft Systems.”
After pressing the button you will find a subset of buttons for the following
pages:
• Status & Info
• Engine & Fuel
• Electrical Power
• Ice Protection
• Landing Gear
Currently pages for Enviro and Pressure, Landing Field Elevation, Video,
Maintenance are all non-operational.
27. 27 The Status & Info page provides the pilot with key
information on external power, parking brake,
temperatures, ID and weights, approximate take off
and landing information, and door status.
The user interface is set to animate any
notifications on current aircraft state to the
pilot.
Currently the Oxygen and IPS fluid are inoperable.
2.3.1 Status
and Info
F L I G H T D E C K
28. 28
The Engine & Fuel Page contains information on the
aircraft's current fuel status. It is important to
note that the values in the top box only are
derived from the Fuel On-Board Sync in the
Initialization Page and provide the most accurate
fuel readings.
It is imperative for pilots to sync the fuel on-
board before take off and on level ground to get
indication of actual fuel levels.
The fuel gauge in the EIS is programed to read fuel
levels based on tank floaters and may incorrectly
show levels in decent, turbulence, and climb.
2.3.2 Engine &
Fuel
F L I G H T D E C K
29. 29 The Electrical Power page provides the pilot with
real time information on the aircraft's electrical
currents, charging status and buses.
Any faults or under-voltage will cause a CAS
message to appear on the PFD.
When external power is connected you will be able
to confirm connection here.
2.3.3
Electrical
Power
F L I G H T D E C K
30. 30
The Ice Protection Page contains key information on
the aircrafts ice protection systems. The display
will indicate individual systems operation status
at any given point in the flight.
The pilot can also find the outside air temperature
readings here.
2.3.4 Ice
Protection
F L I G H T D E C K
31. 31 The Landing Gear page provides the pilot with
information on the current state of the aircraft's
landing gear. It is designed to tell the pilot if
the gear is retracted, down and locked, or on the
ground bearing weight.
2.3.5 Landing
Gear
F L I G H T D E C K
32. 32
3. Bolster Switch Panel
F L I G H T D E C K
This panel contains the main electrical switches, light
switches, Pitot Heat and Anti-Ice controls for the
aircraft.
33. 33
Battery 2
When this switch is in the ON position current is supplied to the EMER
bus.
Battery 1
When this switch is in the ON position current is supplied to the ESS
and MAIN buses. This switch will also engage the Navigation Lights in
the aircraft automatically.
Generator 1
When this switch is in the ON position and the engine is running the
generator will supply power to the ESS, MAIN and EMER buses. It will
also charge Battery 1.
Alternator 2
When this switch is in the ON position and the engine is running the
alternator will supply power to the ESS and EMER buses.
Please note that the aircraft can only run on battery power for a
losing power. Make sure you connect the GPU if running on bat power
time.
3.1 Bat/Gen
Switches
F L I G H T D E C K
34. 34
Strobe Lights
Turns on the anti-collision lights on each wingtip
and the tail.
Landing Lights
Turns on the taxi/landing lights on each wingtip
and on the nose gear. The nose gear taxi light
turns off when the gear is retracted.
Ice Light
Turns on the inspection ice light located on the
main door.
Navigation lights are automatically turned on when
switch is engaged.
3.2 Lighting
Switches
F L I G H T D E C K
35. 35
Master Oxygen
The switch controls the supply cylinder valve
position. When the switch is ON, the oxygen flows
to the crew masks and to the passenger solenoid
valve.
When engaging the switch you should expect to hear
the oxygen release valve open.
3.3 Master Oxygen
Switch
F L I G H T D E C K
36. 36 When the switch is in the “Fresh Air” position,
the ECS bleed air supply valve closes and ambient
air from the ram air supply duct is routed to the
cabin.
When the switch is in the BLEED position, the ECS
bleed air is extracted from the engine and routed
through various valves and systems and fed into
the cabin.
3.4 Fresh Air
Switch
F L I G H T D E C K
37. 37 When on, the air data probe heat system is enabled
and provides heating to the pitot probes and Angle
Of Attack vane.
Engaging this switch is critical for keeping ice
from forming around sensitive instruments. This
should only be engaged for a maximum of five
minutes on the ground and should be on at all times
during flight.
3.5 Probe Heat
Switch
F L I G H T D E C K
38. 38
Engine Anti-Ice
When on, the engine ice protection system protects
the engine inlet and the Pt2/Tt2 probes from ice
build up.
Wing Stab Anti-Ice
When on, the pneumatic de-ice boots on wing and
stabilizer inflate and deflate to crack the ice from
the leading edges. It continuously cycles between
stabilizer, lower wing and upper wing deice zones for
6 seconds, every 60 seconds.
Windshield Norm/High/Max Anti-Ice
When on, IPS fluid is sprayed onto the windshield to
prevent ice from building up. NORM mode simulates
spraying fluid for 4 seconds, every 60 seconds. HIGH
mode sprays fluid for 4 seconds, every 30 seconds.
MAX mode is currently INOP in the sim.
3.6 Anti-Ice
Switches
F L I G H T D E C K
39. 39
4. Garmin Touch Screen
Controllers
F L I G H T D E C K
The GTCs control functionality, settings and visuals on
both the PFD and MFD. For this section we will only be
covering enhancements made by our team for sections
specific to the Vision Jet.
For a deeper dive into learning the ins and outs of the
G3000 in MSFS, please visit the Working Title Discord.
Additionally, there are several helpful videos available
on YouTube.
41. 41
4.1 Initialization Pages
F L I G H T D E C K
The Initialization pages will appear once you power on Bat 1. This will appear on the center GTC only. You can access the Init
pages at any time by navigating to the Utilities/Initialization buttons.
Pilots are encouraged to complete the steps laid out in the Init pages for the best overall experience.
42. 42
Database Status
Here you can link to your Navigraph subscription if
you have one. Once linked you will be able to pull
any available Jeppesen chart right into your MFD.
4.1.1 Database
Status
F L I G H T D E C K
43. 43
To perform the preflight test push the “Pre Flight
Test” button.
Once active you will hear audible alerts for the fire
system along with visual cues and warnings in the
overhead panel.
The second test is the stall warning test. The stick
shaker alert and animation will only play when the
aircraft is approaching a stall point in flight and
not in the test. This is an expected behavior.
4.1.2 System
Tests
F L I G H T D E C K
44. 44
Pilots are encourage to sync fuel for truly
accurate fuel readings in the aircraft. FOB Sync
should be done on level ground before take off,
after the fuel is set to the desired level.
Please note that fuel indicators in the EIS will
fluctuate with turbulence and angle relative to the
horizon.
4.1.3 Initial Fuel
F L I G H T D E C K
45. 45
The aircraft derives all weight and balance
calculations for other parts of the system from these
pages. Info put into the MSFS page will get
transferred to each station here. Generally speaking
its helpful to use the MSFS pages to start with and
carry over the info to the aircraft second.
Values for cargo can be overridden with baggage
presets in VAMS.
Currently all calculations are done in pounds.
Metric will be included in a future update.
Please note that this info is one way only. It will
the MSFS Weight and Balance Page.
4.1.4 Weight &
Balance
F L I G H T D E C K
46. 46
Initialization
Page Additional
Info
F L I G H T D E C K
At any time you can choose to reset the initialization procedure
by hitting the “Reset Initialization” button.
Use the back button to go back to the main Initialization Page
If you choose to accept Initialization without finishing. You will be prompted with a
warning stating you have not completed each page. This is expected behavior and can be
bypassed if you choose. To complete with a flight plan you need to at least enter in a
destination.
47. 47
4.2 CAS Message Alerts
and Warnings
F L I G H T D E C K
Alerts and warnings will show a yellow caution or red warning indicator followed by a chime
depending on the type. Information on the advisory can be viewed on the right hand side of
the Primary Flight Display.
Depending on type, caution and warning messages can be acknowledged by clicking on the
button.
48. 48
4.3 Virtual Aircraft
Management System
F L I G H T D E C K
The Virtual Aircraft Management System or VAMS. controls most sim related features that can
not be accurately dealt with in an interactive manor. Think of this as your willing
suspension of disbelief panel.
Within VAMS you will find the controls for the following tabs:
• Statics Controls static visuals on the aircraft.
• Luggage Controls the pre set luggage configuration options in the luggage compartment.
• Status Pre sets the aircraft into different states.
• Bose Controls the function and visuals of the Bose headphones.
• FAQ Provides a QR code to link to external help options.
• Config Controls the seating layout of the cabin.
49. 49
Here you will find controls for the following visual items:
• Chocks
• Storage Cover
• Covers and Protectors
• Luggage Door
Please note that there are several dependencies that effect
visuals. For ease of use we have labeled them on the button
visual seems to not function properly please make sure that
its requirements listed on the button.
The GPU needs to be bound to a button or key from the sim.
additional options for in sim selection in the future.
4.3.1 Statics
F L I G H T D E C K
50. 50
The SF50 comes with three quick-set luggage
configurations that are pre-populated with weight.
Once selected the system will automatically transfer
the appropriate weights to the weight and balance of
the aircraft.
You will also be able to see the corresponding
selection right in the luggage compartment.
4.3.2 Luggage
F L I G H T D E C K
51. 51
In the status section you will find three quick configuration
options for the aircraft.
• Cold and Dark
• Aircraft is in a fully shut down state.
• Ready For Taxi
• Appropriate lighting, engine and static settings for
taxing.
• Ready For Takeoff
• Appropriate lighting, engine and static settings for
takeoff.
4.3.3 Status
F L I G H T D E C K
52. 52
The SF50 Vision Jet from FlightFX comes with its own
custom Active Noise Cancelation system that can be
activated right from the cockpit. To engage it
enable both the “Headphones” and “Active Noise
Reduction.”
Please note that you must have headphone simulation
the MSFS Main Menu.
4.3.4 Bose
F L I G H T D E C K
53. 53
For quick access please use a camera enabled smart phone or
tablet to scan the QR code. This will take you directly to
the FlightFX website where you will find the manual as well
as discord links for further information and support.
4.3.5 FAQ
F L I G H T D E C K
54. 54
You can quickly change the seating configuration of
the cabin here.
Please note that you must be on the ground and
accomplish this.
4.3.6 Config.
F L I G H T D E C K
55. 55
5. Environmental
Control System
F L I G H T D E C K
The aircraft comes equipped with a Environmental Control
System. The system is simulated within the constraints
of MSFS and has no real effect on de-icing or any other
windscreen related event.
It can be activated by depressing the ECS disable button.
Fan settings can be adjust via the fan control knob.
56. 56
6. Engine Start Panel
F L I G H T D E C K
The SF50 from FlightFX fancies itself as one of the
easiest aircraft to start in MSFS 2020.
To start the aircraft simply twist the knob from “OFF” to
“RUN”
Then depress the ENGINE “START/STOP” button. The entire
process is automated by the aircrafts on-board systems.
57. 57
7. Parking Brake
F L I G H T D E C K
The parking brake is located under the PFD and pilots
side GTCs.
Please Note that the click spot for the handle is located
right of the brake itself.
58. 58
8. Autopilot Control
Panel
F L I G H T D E C K
The autopilot control panel contains all of the controls
that many of you have become familiar with. The SF50
comes with a Flight Level Change mode for climbing and
descending at an indicated airspeed. The autopilot is
based off of the existing MSFS 2020 autopilot controls
and does have certain limitations.
VNV is currently inoperable until the G3000 refresh comes
out.
59. 59
9. Auto Throttle
Control Panel
F L I G H T D E C K
The SF50 G2 comes equipped with a fully functioning auto
throttle. It will work in both Managed Speed mode (MAN)
and Flight Management System mode (FMS.)
60. 60
Auto Throttle
Additional
Info
I N T R O D U C T I O N
AT Button: Arms/Disarms the auto throttle
MAN Button: Selects manual speed mode management
FMS Button: Selects Flight Management Mode
Speed Dial: Allows the pilot to select the desires speed in
management mode.
Snap To MCT: Click spot located at the back of the throttle handle to
set Maximum Continuous Thrust mode. This prevents damage to the engine.
Pitch Trim: To change the pitch trim turn the wheel forward or backward
depending on desired trim setting.
Flight Management mode will automatically select the most efficient speeds for a current autopilot mode. These speeds are
predetermined by the manufacturer.
MCT stands for Maximum Continuous Thrust and represents the highest safe operating condition for the engine without causing
damage to internal parts. Pilots are encouraged to engage MCT or be in FMS immediately after takeoff. Expect a CAS message
warning from the aircraft if operated in Take Off Thrust for over 5 minutes.
It is possible that the auto throttle can drop to zero and slowly creep back up after being engaged into one of the modes. If
this happens please reset the auto throttle by turning off AP and then cycling through the AP/FLC/MAN or FMS modes again. That
will usually clear it.
61. 61
10. Fuel Control Panel
F L I G H T D E C K
Fuel control can be switched between tanks.
Traditionally the fuel control switch is typically set to
the auto position which allows the aircraft to self
regulate the balance of fuel between its wing tanks.
63. 63
11. Courtesy Light
Switch
F L I G H T D E C K
The courtesy lights are pre-set to auto when loading into
the aircraft. After 15 minutes the lights will
automatically shut off. This also means that opening the
doors at any time after the lights have shut off will re-
activate the lights.
Courtesy lights control all interior lighting behind the
pilot as well as the under wing exterior lights iconic to
the real aircraft.
64. 64
12. Hobbs Meter
F L I G H T D E C K
The Hobbs meter will track your hours in the aircraft.
66. 66
13. Exterior Door
Handle
F L I G H T D E C K
Operates the main cabin door. Click on the handle to
open the door. To close it look to the upper portion of
the clam shell door for the handle. Click again to
close.
The door will automatically close if forgotten during
pre-flight and can not be opened during flight.
The door close animations must play completely before
being able to be engaged again.
68. 68
14. Drop Down Display
F L I G H T D E C K
The SF50 comes with a center drop down entertainment
display. The handle is located on the back of the screen
opposite of the cockpit.
70. 70
Recommended
Settings
Audio Settings:
Turn off headphone simulation in order to use the
custom Bose Active Noise Reduction built into the
aircraft.
All volume sliders should be set to 100.
Exceptions are Music and Voices which can be set
to personal preference.
Graphics:
Turn Bloom Effect on for best viewing of exterior
and interior lighting.
Flight Model:
“Legacy” mode is forced to “Modern” and can not be
switched back.
Peripherals:
Add-on controls are encourage but not necessary.
Computer:
Not a potato
The following are some recommended
settings for the best experience with
the SF50. In the end each user must
decide what settings are best suited
for their particular set up.
71. 71
Known Issues
S E T T I N G S
We kindly ask that you always try and start with a clean profile and no carry over from any previous aircraft. Most bindings
are straight from the sim and can be easily set up through the menu in game.
Please be sure to disable FSRealistic Sounds. They will override the custom sounds from the Vision Jet and degrade the quality.
72. 72
Non Standard Switch Bindings
S E T T I N G S
Emergency Gear Door
L:SF50_gear_alternate_ext, Bool
0 = OFF, 1 = ON
Emergency Gear Handle
L:SF50_gear_alternate_ext_handle,
Bool
0 = OFF, 1 = ON
The binding variables listed below are considered to be nonstandard and thus not immediately apparent. Any additional bindings
that are not listed will use commonly known variables found in the sim.
Air Flow (Bleed Air)
Air flow - L:SF50_air_flow_switch,
Bool
0 = OFF, 1 = ON
AT FMS/MAN Mode
L:SF50_push_at_fms_man, Bool
0 = FMS , 1 = MANUAL
Fan Control
L:SF50_TempFan, number
0 = OFF, 1 = Max
TV
L:SF50_cockpit_tv, Bool
0 = OFF, 1 = ON
Checklists
Scroll Up : H:checklist_scroll_up
Scroll Down :
H:checklist_scroll_down
Select :
H:checklist_checklist_select
Fuel Tank Selector
L:SF50_fuel_selector_left, Bool
L:SF50_fuel_selector_right, Bool
L:SF50_fuel_selector_auto, Bool
0 = OFF, 1 = ON
ECS
L:SF50_ecs, Bool
0 = OFF, 1 = ON
73. 73
Non Standard Switch Bindings Cont.
S E T T I N G S
Courtesy Lights
L:SF50_Switch_Courtesy_Mode, Number
0 = OFF, 1 = AUTO, 2 = ON
Engine Knob
L:SF50_knob_stop_run, Bool
0 = OFF, 1 = RUN
Oxygen
L:SF50_oxygen_switch, Bool
0 = OFF, 1 = ON
Windshield De-Ice High
L:SF50_deice_high, Bool
0 = OFF, 1 = ON
The binding variables listed below are considered to be nonstandard and thus not immediately apparent. Any additional bindings
that are not listed will use commonly known variables found in the sim.
74. 74
VAMS Bindings
S E T T I N G S
Storage Cover
sf50_vams_static_storage_cover
0 = OFF, 1 = ON
Covers and Protectors
sf50_vams_static_covers
0 = OFF, 1 = ON
The binding variables listed below are considered to be nonstandard and thus not immediately apparent. These bindings govern
the controls of the static objects within the aircraft and can be useful in a “walk around” situation.
Chocks
chocks : sf50_vams_static_chocks
0 = OFF, 1 = ON
Headphones
sf50_vams_static_headphones
0 = OFF, 1 = ON
“0” means off of head and placed on
the dash
76. 76
Tips From The
Pros
0 6
Always plan enough fuel to land with at least 70 gallons
onboard, in case you need to divert.
For a high-performance departure, leave the flaps at 50%
and climb at Vx (94 KIAS) and takeoff thrust until clear of
obstacles, then pitch forward to normal climb speed. Bring
the flaps up as you cross 115 knots.
Turning on AFT CTRL on the ECS panel locks out the pilot
temperature controls -- either you get to control the
temperature, or your passengers do!
D E P A R T U R E / C L I M B
The seats are not included in the weight and balance
because they're easily removable. You must add the weight
of the seats you have installed to the empty weight of the
aircraft. The adult seats weigh about 33 pounds and the
child seats weigh about 15 pounds.
Bring the gear up with positive rate and no runway
remaining. Bring the flaps up as you accelerate above 115
knots.
In the real aircraft there is a 5-minute required limit on
takeoff thrust, and a 2-minute recommended limit.
77. 77
Tips From The Pros
0 6
Always plan enough fuel to land with at least 70 gallons onboard,
in case you need to divert.
The fuel sensors tend to be inaccurate in climbs or descents. They
read low in descents and high in climbs, especially in the 80–120
gallon range. Use the fuel totalizer to get a more accurate sense
of how much fuel you have. You will need to FOB SYNC the totalizer
to make sure it's accurate. You should do this twice: once during
the inits, and once just before takeoff, to ensure you have the
most accurate fuel quantity reading you can.
“You will need to FOB SYNC the totalizer to
make sure it's accurate. You should do this twice:
once during the inits, and once just before
takeoff, to ensure you have the most accurate
fuel quantity reading you can.”
Tim Morgan
Vision Jet Pilot
FOB Sync
D E P A R T U R E / C L I M B C O N T .
78. 78
Tips From The Pros
0 6
VNAV Tip 1: Once you've activated your Approach, use the FPL button
to view the flight plan in the center Touch Controller. Using the
arrow buttons, scroll down until you see the Approach Legs, and
click on the pencil icon next to each leg to input the required
altitude you need to be at that waypoint. The Multi-Function
Display will show a ToD (Top of Descent) and BoD (Bottom of
Descent) markers for each leg that requires an altitude change.
Begin your descent manually once you're at the ToD marker by
setting your target altitude to the desired level, reducing power,
and setting an appropriate pitch (nose down). For passenger
comfort, most descents don't exceed 1500 feet per minute.
V N A V A D V I S O R Y
79. 79
Tips From The Pros
0 6
VNAV Tip 2: In absence of coupled VNAV to the autopilot, you can
use the Range To Altitude Arc to determine where along your flight
path you'll achieve your desired altitude. The cyan colored arc
will continuously compute your intercept point as you change
throttle and nose-pitch to increase or decrease your vertical speed
(feet per minute). This gives you a graphical representation of
whether you're going to intercept a waypoint at the required
altitude, or if you need to make throttle or pitch adjustments.
V N A V A D V I S O R Y
80. 80
Tips From The Pros
0 6
For a normal cruise, plan to burn about 90 gallons in the first
hour and 65 gallons per hour there after.
If you have an engine failure, you can use the autopilot to help
fly the plane while you troubleshoot. Set FLC to descend you at
120 knots, and use the NRST function and NAV mode to take you
directly to the closest suitable airport.
Check your roll trim before disconnecting the autopilot. If it's
way out of center, you will get a nasty surprise once you hit
A/P DISC.
Typical cruise at MCT and most altitudes will be 311 KTAS
(around M0.52). On hotter days or at lower altitudes, cruise
will be slower.
In jets, the barber pole is a destination, not a limitation.
Don't be afraid to operate right below Vmo/Mmo if you can.
(Though in turbulent conditions, make sure you have sufficient
margin for wind gusts.)
Typical cruise at MCT and most altitudes will be 311 KTAS
(around M0.52). On hotter days or at lower altitudes, cruise
will be slower.
Turn on wing/stab anti-ice at the first sign of ice forming on
the wings. The tail picks up ice faster than the wings, so if
you see a little bit of ice on the wings, there's probably more
on the tail.
Always ask yourself, before entering any cloud, "Should I turn
on engine anti-ice?
I N F L I G H T
81. 81
Tips From The Pros
0 6
In the PFD Settings menu, you can find some of the more commonly set or customized settings including:
Synthetic Terrain (SVT) On/Off
Wind Vector Options
Baro Unit Select (Inches or HpA)
Meters Overlay
I N F L I G H T
82. 82
Tips From The Pros
0 6
In the PFD, putting the centerline of the runway just to
the left of the airspeed tape will keep your nose wheel as
close as possible to the middle of the runway or taxiway
when taxiing, taking off or landing.
Typical descent profiles are 1500, 2000, or 2500 fpm, at 5–
10 knots below Vmo/Mmo if possible.
The Cirrus Approach teaches slowing to 140 knots and flaps
50 when crossing the IAF or on the base leg of a vectored
approach, then gear down, flaps 100 and VREF+10 when
crossing the FAF, or a five-mile final.
Flaps 50 landings introduce a lot of float: Plan to touch
down well beyond your aim point. Flaps-up landings are
abnormal and should be done only in an emergency.
A flameout landing begins overhead the airport with the
gear down and flaps 50%. Fly a low key (circling) approach
at 120 knots onto the downwind and base. On final, slow to
VREF and lower flaps to 100% once landing is assured.
The best way to slow down is to plan your descent well in
advance. The second-best way is to lower the gear. With a
VLO_EXT of 210 knots, the gear is your most effective speed
brake.
For descent guidance on a VFR flight (or an IFR flight
without an approach), put in a 0' AGL altitude constraint
at the destination waypoint in your flight plan. You will
get a TOD marker you can use to plan your descent.
D E S C E N T / L A N D I N G
83. 83
Tips From The Pros
0 6
Looking for an easy 3 degree Glide slope? Use the Flight Path Marker or Velocity Vector (green circle with lines representing
wings and rudder on PFD). It's a continuously computed aim point that tells you where your aircraft is actually headed, taking
into account your speed, altitude, attitude (bank, dive, climb, level) and wind direction. On the three nautical mile final before
the runway, adjust your speed and pitch for the descent to keep your Flight Path Marker aimed just after the runway end. If you
have Synthetic Vision enabled in the PFD, the runway will get more detailed as you close, allowing you to eventually see the
runway markings. Put the FPM right in between the Touch Down Zone markings and hold it there by small adjustments to throttle and
pitch. If you keep it steady, you have essentially started flying a three degree optimal descent to the runway.
D E S C E N T / L A N D I N G
84. C O N T A C T
U S
Discord:
https://discord.gg/BfWKkJS3ET
Email:
Info@flightfx.io
Follow us:
www.facebook.com/flightfx1/
https://twitter.com/flightfx1
Editor's Notes
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.
Note: After adding your pictures, right click on it and “Send To Back”.