Weiber's Fiber Optic Equipment or Fiber Fusion Splicer are ideal equipment for research and general
applications in field of computer networking and networking industry.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.
Prysmian offers a comprehensive range of flexible cable solutions with Class 5 conductors for fixed installations. With Flexible XLPE and Fire Performance cables, Prysmian has a full suite of cables for the entire Construction market.
The last few years microfluidics stopped being a niche technology,with a user base predominantly consisting of engineers. Most of the microfluidic companies now are growing and the install base of instruments based on microfluidics is growing fast. Still, the situation is far from ideal. Designs are unnecessary complicated, there is little to no reuse of build-up expertise or developed components. Similar to the early computerindustry,amajor reason for the low popularity is the complicated character of microfluidic devices, specifically in terms of fabrication, and thusmaking theminaccessible to a larger population.[1]I n the ECSEL MFM project first steps have been made towards developingstandards for microfluidic devices. Standards for basic design features like geometrical outlines and port locations have been proposed inwhite papers[2]and where adopted by ISO in an ISO IWA process.[3]One of the complications of microfluidic products is the challenge of providing electrical connections. The average microfluidic engineer lacks electronicpackaging knowledge. Furthermore, the incompatibility of microfluidics and electronics combined with space constrains, limits the technology choices.
Thorne & Derrick UK are official distributors of the SebaKMT range of LV-HV Cable Fault Location instruments including cable sheath testers and cable sheath fault prelocation and pinpointing units. SebaKMT are the leading manufacturer of measurement equipment for the diagnosis of cable networks and for cable fault location. Cable faults are the ''natural enemy'' of reliability. The innovative SebaKMT products make it possible to quickly localise low and high voltage cable faults without causing damage to fault-free parts of the cable.
Relong’s RC300E is commercial microwave and RF laminate
material designed with low dielectric constant and very low
loss characteristics. This ceramic-filled, woven fiberglass
reinforced PTFE composite material is use unique chemistry
formulation and processing to offer RF and Microwave
designers an advantage for improving electrical properties
and mechanical performances.RC300E provides a significant
improvement in performance stability over the current
product line and other traditional fluoropolymer-glass
laminates.
RD250 is the PTFE composite reinforced with woven
fiberglass cloth with low dielectric constant,very low Loss
Tangent, and low cost,etc. The RD250 uses a unique
chemical formulation structure and process to improve the
dielectric and mechanical properties of the material while
reducing costs, and providing microwave RF designers with
high frequency microwave materials of superior
performance. Compared with existing domestic and foreign
similar products and other traditional fluororesin glass cloth
materials, RD250 has significant cost performance
advantages.
MEMS 1x N optical switch from OEM ODM Factory Shenzhen Hifibercom Technology ...WendyXia8
Optical switch have a wide range of applications in fiber
communication systems, and their implementation technologies
are diverse, including: mechanical optical switch, thermo-optic
switch, acousto-optic switch, electro-optic switch,
magneto-optical switch, and MEMS optical switch, etc. The
MEMS optical switch is a high-tech product based on
MEMS(Micro-Electro-Mechanical System) technology. It has
the characteristics of small size, low power consumption, and
good expandability. It is widely used in optical network
scenarios such as ROADM, iODF and fiber sensing etc
Weiber Modular Clean Room/ Portable Clean
Rooms are a free standing, rigid wall, modular,
prefabricated cleanroom system that is designed to
provide superior cleanroom performance and esthetic
appeal.
Industrial Water Testing Meters, Acmas Water Testing Meters, Turbidity Meter, Test Instruments Water Testing Meters, Water Meter Test Equipment, Water Testing Instruments, Water Test Meter, Potable Water Test Kit, Water Quality Testing Meters For More Information Please Logon http://cutt.us/DMk6M
Portable Ultrasonic Flaw Detector with hi-resolution color TFT LCD display.The background color and the wave color can be selectable according to the environment. LCD brightness can be manually set.
Prysmian offers a comprehensive range of flexible cable solutions with Class 5 conductors for fixed installations. With Flexible XLPE and Fire Performance cables, Prysmian has a full suite of cables for the entire Construction market.
The last few years microfluidics stopped being a niche technology,with a user base predominantly consisting of engineers. Most of the microfluidic companies now are growing and the install base of instruments based on microfluidics is growing fast. Still, the situation is far from ideal. Designs are unnecessary complicated, there is little to no reuse of build-up expertise or developed components. Similar to the early computerindustry,amajor reason for the low popularity is the complicated character of microfluidic devices, specifically in terms of fabrication, and thusmaking theminaccessible to a larger population.[1]I n the ECSEL MFM project first steps have been made towards developingstandards for microfluidic devices. Standards for basic design features like geometrical outlines and port locations have been proposed inwhite papers[2]and where adopted by ISO in an ISO IWA process.[3]One of the complications of microfluidic products is the challenge of providing electrical connections. The average microfluidic engineer lacks electronicpackaging knowledge. Furthermore, the incompatibility of microfluidics and electronics combined with space constrains, limits the technology choices.
Thorne & Derrick UK are official distributors of the SebaKMT range of LV-HV Cable Fault Location instruments including cable sheath testers and cable sheath fault prelocation and pinpointing units. SebaKMT are the leading manufacturer of measurement equipment for the diagnosis of cable networks and for cable fault location. Cable faults are the ''natural enemy'' of reliability. The innovative SebaKMT products make it possible to quickly localise low and high voltage cable faults without causing damage to fault-free parts of the cable.
Relong’s RC300E is commercial microwave and RF laminate
material designed with low dielectric constant and very low
loss characteristics. This ceramic-filled, woven fiberglass
reinforced PTFE composite material is use unique chemistry
formulation and processing to offer RF and Microwave
designers an advantage for improving electrical properties
and mechanical performances.RC300E provides a significant
improvement in performance stability over the current
product line and other traditional fluoropolymer-glass
laminates.
RD250 is the PTFE composite reinforced with woven
fiberglass cloth with low dielectric constant,very low Loss
Tangent, and low cost,etc. The RD250 uses a unique
chemical formulation structure and process to improve the
dielectric and mechanical properties of the material while
reducing costs, and providing microwave RF designers with
high frequency microwave materials of superior
performance. Compared with existing domestic and foreign
similar products and other traditional fluororesin glass cloth
materials, RD250 has significant cost performance
advantages.
MEMS 1x N optical switch from OEM ODM Factory Shenzhen Hifibercom Technology ...WendyXia8
Optical switch have a wide range of applications in fiber
communication systems, and their implementation technologies
are diverse, including: mechanical optical switch, thermo-optic
switch, acousto-optic switch, electro-optic switch,
magneto-optical switch, and MEMS optical switch, etc. The
MEMS optical switch is a high-tech product based on
MEMS(Micro-Electro-Mechanical System) technology. It has
the characteristics of small size, low power consumption, and
good expandability. It is widely used in optical network
scenarios such as ROADM, iODF and fiber sensing etc
Weiber Modular Clean Room/ Portable Clean
Rooms are a free standing, rigid wall, modular,
prefabricated cleanroom system that is designed to
provide superior cleanroom performance and esthetic
appeal.
Industrial Water Testing Meters, Acmas Water Testing Meters, Turbidity Meter, Test Instruments Water Testing Meters, Water Meter Test Equipment, Water Testing Instruments, Water Test Meter, Potable Water Test Kit, Water Quality Testing Meters For More Information Please Logon http://cutt.us/DMk6M
Portable Ultrasonic Flaw Detector with hi-resolution color TFT LCD display.The background color and the wave color can be selectable according to the environment. LCD brightness can be manually set.
Weiber's Multi-Function Process Calibrator is unique and ideal equipment for research and general
applications in the field of measurement and analysis of electricity (electric current) in terms of - voltage current
(DC); electrical resistance, frequency, thermocouple, thermo resistance, Switch meter measure, and continuity
test.
Five Zones Split Tube Furnace is a CE certified split 80mm OD (3" I.D) Five-zone tube furnace which can achieve faster heating up to 1200oC and create smooth thermal gradient or one uniform constant temperature zone by adjust four zone temperature.
Torque is part of the basic specification of an engine: the power - output of an engine is expressed as its torque multiplied by its rotational speed. Digital Torque Meter is an intellectualized and digital measuring instrument, which is specially designed for testing and measuring of varied torque to be applied to caps of bottles, and is of use to Pharmaceuticals and Food and Beverage Industry.For More Information Please Logon http://goo.gl/QsvLfC
Computerized bench-top muffle furnace is a CE certified & computerized benchtop high temperature muffle furnace with laptop and pre-installed control software.
The Stroboscope was invented and improved upon by H. E. Edgerton starting in 1931. Weiber's Stroboscope is
ideal equipment for research and general applications in field of study of moving objects. Our Stroboscope is an
optical instrument that makes equipment appear to be slow or still.
Under continuous frequency of 1 kHz to 500 kHz, automatic measurement of magnetic hysteresis loop of the soft magnetic materials such as silicon steel, precision alloy, non-crystal and ferrite, accurate measurement on the dynamic magnetic characteristic parameters such as amplitude permeability, loss angle loss iron Pc, remanence Br and coercivity Hc Windows measurement software applied simply. For More Information Please Logon http://goo.gl/Xa7A6d
We are manufacturers of horizontal laminar air flow in India since 1990. Our laminar air flows are widely used for day to day
clean rooms activities, pathogen handling, microbiology and biotechnology applications in various laboratories.
Weiber Vertical Laminar Air Flow Manufacturers, Laminar Airflow Manufacturers India, Air Flow Bench Suppliers, Vertical Laminar Air Flow Bench, Vertical Air Flow Suppliers, Vertical Laminar Airflow India, Laminar Airflow Suppliers India, Vertical Laminar Air Flow, Airflow Laminar Manufacturers For More Information Please Logon http://cutt.us/sBSY
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermal Processors. Compared with traditional RTP systems, Allwin21’s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the BEST rapid thermal processing performance (repeatability, uniformity, and stability) with decades of research directly applicable to ours.
You can use MFC2 for wet N2 process with using bubbler on our RTP equipment during steady time. The chamber would be purged with dry N2 using MFC1 at the beginning and end of the process.
Please help fill in the RFQ at our website for suitable production proven Rapid Thermal Processor model and configuration for your applications. Please go through the Q and A if necessary before you fill in the RFQ below. Appreciate your time. Thank you very much.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Allwin21 Corp. has been focusing on providing solutions and enhancements to plasma Etch RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been Process-Proven. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid 3-axis robotic wafer transfer system, and new critical components to achieve the goal of giving our customers a production edge.
Please help fill in the RFQ at our website for suitable model and configuration for your applications. Appreciate your time.
Allwin21 Corp. has been focusing on providing solutions and enhancements to Tegal 901e, Tegal 903e, Tegal 901e TTW, Tegal 903e TTW,Lam AutoEtch 490 ,Lam AutoEtch 590, Lam AutoEtch 690, Lam AutoEtch 790 ,Lam Rainbow 44XX, 45XX, 46XX,47XX Series , Gasonics Aura 1000, Gasonics Aura 2000LL, Gasonics Aura 3010, Gasonics L3510 ,,Matrix 105, Matrix 105R, Matrix 205, Matrix 10 (1104, 1107, 1108), Matrix 303,Matrix 403 ,Matrix 10(1303, 1307), Branson/IPC 3000, Branson/IPC L3200 used Plasma Asher, Plasma Descum,plasma Etch, RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been proven to be a true “work horse”. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system (Video) and new critical components to achieve the goal of giving our customers a production edge with right cost.
Allwin21 Brochures for Rapid Thermal Processing equipment, Plasma Asher ,Plasma Descum Equipment, Plasma Etcher, RIE, Sputtering Deposition Equipment, Thin Film Metrology ,semiconductor equipment. Made in USA. All are production proven, the most popular semiconductor process equipment.
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition, and Metal Film Metrology semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, & LED industries. We endeavor to be a leader in our product lines. To achieve this, we have been providing unique innovative and cost-effective technical solutions, high quality equipment, and on time spare parts delivery worldwide. We have maintained a global presence that has grown and expanded into the major high-tech manufacturing areas of the world. We pride ourselves on developing and continuing lasting customer relationships.
We understand that a timely responsive support and service are critical elements in semiconductor industries. Allwin21’s experienced engineer team is the best guarantee for high quality service and support. We provide on-site installation, training, maintenance, system optimization, retrofits, and/or customized upgrades.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermo Processors.Compared with traditional RTP systems, Allwin21″s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the best rapid thermal processing performance ( repeatability , uniformity and Stability etc.).
AWgage-150 measures sheet resistance in ohms per square or milliohms per square. If specific resistivity is known, the thickness of the deposited film layer can be computed from the sheet resistance. The choice of measurement data is easily get in the software. AWgage-150 can accommodate 150mm (6″) wafers as well as the standard 2″, 3″,4″, 5″ wafers without any hardware change.
Allwin21 AWgage-150 Features:
30 years proven Eddy Sheet Resistance Measurement technologies.
Non-contact Sheet Resistance Measurement technologies.
1mΩ/square to 19,990 Ω/square measurement range capability
Touch Screen Monitor and PC w/ Advanced Allwin21 control software.
Wafer carriage travel programmed with internal encoder step motor , without encoder disk.
Consistent wafer-to-wafer process cycle repeatability.
Small footprint and energy efficiency.
Made in U.S.A.
Specifications:
Test Sights: Single center-point, 5-point, or 9-point.5-9
Highly Conductive or Metal Sheet Resistance:
1 to 1,999 mΩ/square
1 to 1,999 Ω/square
Or
10 to 19,990 Ω/square
Highly Conductive or Metal Film ThicknessMinimum: 100 ÅngströmMaximum: Proportional to resistivity. Maximum for a resistivity of 2.7 mW-cm is 270 kÅ (27 mm
trader, distributor, wholesaler and supplier of MCCB, RCBO, ABB Range Front Panel Residual Current Relays, Arc Guard System, Breakers & Switches, Current Measurement System, Low Voltage Power Distribution, Manual Moniter Starter, Lightning & Surge Protection, Protection & Monitoring Relays and many more
Atomic Layer Deposition solutions for SiC Power ElectronicsBeneq
Power Electronics International
Brussels, Belgium
19.04.2023
Atomic Layer Deposition solutions for SiC Power Electronics
Integrated ALD passivation/gate dielectric stack for SiC MOSFET
Presented by Mikko Söderlund from Beneq Oy
pH Meters,soil ph meters,portable ph meters,ph meters for water testing, pH sensors,Laboratory pH meters,pH Measuring instruments For More Information Please Logon http://cutt.us/7aMHZ
Table Top Copper Concentration Meter, Banch Top Copper Concentration Analyzer, High Quality Table Top Copper Concentration Sensor, Portable Copper Concentration Measurement System For More Information Please Logon http://cutt.us/HAbK
Weiber's Multi function reactor is an ideal instrument for performing multiple functions as ascertaining Chemical
Oxygen Demand, i.e. COD and TP / TN. COD is necessary to ascertain the oxygen requirement of waste water prior to its release into the environment, so that it can be monitored and controlled to avoid harmful effects on the nature, human beings, etc.
Weiber's Colorimeter is ideal equipment for research and general applications in the field of analysis of
concentration of a solute. Our equipment is useful in the process of colorimetry where we examine a certain known solution by measuring the wavelengths of light absorbed by it.
Water Hardness Meters, Water Softeners, Water Hardness Tester, Handheld Water Hardness Testing System, Weiber Pocket Water Hardness Tester, Portable Water Hardness Meter, Water Hardness Monitor, On-Line Water Hardness Analyzer, Water Hardness Test Kit, Water Quality Testers, Benchtop Water Hardness Meters For More Information Please Logon http://cutt.us/dAW7
The microprocessor based automatic, advance, electronic and latest designed COD Analyzers are used for detection of Chemical Oxygen Demand. The Laboratory COD analyzer acts as water analyzer for detection of Chemical Oxygen Demand in both polluted and normal water. Weiber water analyzer works as high quality analysis tool for determination of inorganic pollution, waste water, sewage and Plant Effluent Treatment. For More Information Please Logon http://goo.gl/gaktwZ
The Microprocessor Based Hardness Testers is highly developed Water Hardness Meter, which is best for
analytical usages in testing and research, laboratories and production plants. This microprocessor based table
top water hardness meter is capable of measuring total hardness and Ion concentration with great accuracy.
The Eco. Series TDS Meter are most economical and highly accurate multi parameter meters. These type of
meters are best when, multiple parameter in the given solution require to be checked in the field or production
floor.
The Portable pH Meters are very economical microprocessor based pH/mV meter, is best for routine use in schools, laboratories and manufacture plants. This microprocessor based hand help pH meter is easy to carry
and use in field as well as the laboratories.
pH Meters,soil ph meters,portable ph meters,ph meters for water testing, pH sensors,Laboratory pH meters,pH Measuring instruments For More Information Please Logon http://cutt.us/Bjy1
The Ph Meters of this series is economical icroprocessor based pH/mV meter, is best for routine use in schools, laboratories and manufacture plants. This microprocessor based table top pH meter is capable of measuring pH/mV value and Ion concentration measurement with an Ion selective electrode.
Multi parameter micro processor based highly accurate pH and conductivity meters These type of meters are best when, other than one parameter in the given solution need to be checked and recorded. The combination of the parameters makes very handy and user friendly. For More Information Please Logon http://goo.gl/nbk6ab
Portable pH Dissolved Oxygen Meters, Dissolved Oxygen Meter for Lab, Dissolved Oxygen Ph Meter, Benchtop pH Dissolved Oxygen Meters For More Information Please Logon http://cutt.us/it8f
Multi parameter micro processor based highly accurate meters. These type of meters are ideal when,multiple
parameter in the given solution need to be checked and recorded.
The pH Conductivity Meters are multi parameter micro processor based highly accurate pH and conductivity meters these type of meters are best when, more than one parameter in the given solution require to be checked and recorded.For More Information Please Logon http://goo.gl/VEvLke
Water Silver Content Detector, Economical Water Silver Content Detector, Water Silver content Analyzer, Water Silver content Meter, Water Silver content Tester,Water Silver content Chaker,Water Silver content Sensor For More Information Please Logon http://cutt.us/gpx3
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
2. R
FIBER OPTIC EQUIPMENTS
MODEL NO.- ACM-TMD -2711
Weiber's Fiber Optic Equipment or Fiber Fusion Splicer are ideal equipment for research and general
applications in field of computer networking and networking industry. The technicians involved with maintaining
fiber networks in the networking industry are specifically interested in such a product.
Weiber's Fiber Optic Equipment/Fiber Fusion Splicer works through a fusion splicer. Fusion splicer connects two
fiber optic cables perfectly. The fiber cable ends are put in a closed space where fusing can be avoided. The
coating from the ends of the cables is removed. Then a fiber cleaver cuts and smoothens the cables, which are
then put into the holders of our Fiber Fusion Splicer. With the help of the motor installed inside our equipment the
fiber cable ends are put parallel to each other. Our fusion splicer then generates a spark, raising temperature of
the fiber cables which leads to fusing of cable ends together.
Major Technical Features
Ÿ
Telecommunication Industry
Ÿ
Computer Networking Industry
Models Available of the weiber's Fiber Optic Equipment
Ÿ
TMD -2711 A Single Fiber Fusion Splicer
TECHNOLOGIES PVT. LTD.
3. R
FIBER OPTIC EQUIPMENTS
MODEL NO.- ACM-TMD -2711
Product Features
Ÿ
Colour LCD Screen
Ÿ
Compact and Light Weight
Ÿ
Reversible Monitor with Control Panel on each side
Ÿ
Maximum wind velocity of 15 m/s
Ÿ
8 seconds splice time , 40 seconds tube-heat time
Ÿ
Simultaneous X and Y views
Ÿ
Large capacity internal battery
Ÿ
System Test ensures the best working condition
Ÿ
User Programmable
Ÿ
Auto check fiber end face
Ÿ
Auto calibrate parameters
Ÿ
Store 8000 groups of splice results
TECHNOLOGIES PVT. LTD.
4. R
FIBER OPTIC EQUIPMENTS
MODEL NO.- ACM-TMD -2711
Technical Specifications
Ÿ
Applicable fibers
SM, MM, DS, NZ-DS, EDF use)
Ÿ
Cladding diameter
100 to 150 um units
Ÿ
Coating diameter
100 to 1000 um
Ÿ
Fiber cleaved length
8 ~ 22mm (standard)
Ÿ
Splicing mode
Auto & Manual
Ÿ
Average splice loss
0.02 dB(SM), 0.01 dB(MM), 0.04 dB(DS), 0.04dB (NZDS)
Ÿ
Return loss
=60 dB
Ÿ
Environment conditions
- 25 ~ + 50 ºC (operation temperature),
0 ~ 95 % RH (humidity),
0 ~ 500m (altitude),
Ÿ
Storage environment
- 40 ~ + 80 ºC (temperature),
0 ~ 95 % RH (humidity)
Ÿ
Protection sleeve length
Protection sleeve length
Ÿ
Tension test
Tension test
Ÿ
Interface
Interface
TECHNOLOGIES PVT. LTD.
5. R
FIBER OPTIC EQUIPMENTS
MODEL NO.- ACM-TMD -2711
Power Supply
Ÿ
Ac Adaptor
85 ~ 260 V input voltage
Ÿ
Internal Battery
12 V voltage, 10 Ah, up to 200 times of continuous splices and
heats
Ÿ
DC adaptor
12 V voltage, optional multipurpose external battery
Ÿ
Dimensions
170 (W) 140 (H) 170 (D) mm
TECHNOLOGIES PVT. LTD.
6. An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485
WHO: GMP Products | GLP Compliant Products
www.acmasindia.com |
www.acmasglobal.com | www.measuring-meters.com
TECHNOLOGIES PVT. LTD.
CORPORATE OFFICE/ SHOWROOM (INDIA)
Plot No. 352-353, Sector – 57
Phase- IV Kundli, Sonepat, Haryana - 131028
Land Line No.: +91 - 11- 47619688,
Fax: +91-11-47619788
E-mail.: info@acmasindia.com
SALES OFFICE (HONG KONG)
Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East,
Sheung Wan, Hong Kong (PRC)
Tel.: 0086-13929598046 | 0086- 18922303099
E-mail.: hk@acmasindia.com
SALES OFFICE (RUSSIA)
Inmed Trade Street Ozerkovsky Embankment,
Unit No 50, Straine- 1, Off- 502, Moscow, Russia
E-mail.: info@acmasindia.com
Tel.: 0049- 79592345 | Email: russia@acmasindia.com