This document discusses fermentation media and raw materials. It explains that fermentation media must provide nutrients like carbon, nitrogen, minerals and vitamins to support microbial growth and product formation. Common carbon sources mentioned include molasses, malt extract, starch and cellulose. Nitrogen sources can be inorganic like ammonium salts or organic like corn steep liquor, yeast extract and soybean meal. Other factors in choosing raw materials are also outlined such as cost, availability and ability to support high product yields.
Lignin is one of the major substance in the world. This slide presented lignin, role in the plant, biosynthesis, lignin evolution, and bioengineering or lignin.
Microbial and enzymatic activities in paper-industryPitch control is an important aspect in pulp and
paper manufacture, and the first example where microbial
biotechnology provided successful solutions in this industrial
sector. Triglycerides cause deposits in softwood
mechanical pulping, and both microbial and enzymatic
products have been commercialized to be applied on wood
and pulp, respectively. The former are based on colorless
strains of sapstain fungi. The latter are improved lipases,
including thermostable variants from directed evolution
.
Lignin is one of the major substance in the world. This slide presented lignin, role in the plant, biosynthesis, lignin evolution, and bioengineering or lignin.
Microbial and enzymatic activities in paper-industryPitch control is an important aspect in pulp and
paper manufacture, and the first example where microbial
biotechnology provided successful solutions in this industrial
sector. Triglycerides cause deposits in softwood
mechanical pulping, and both microbial and enzymatic
products have been commercialized to be applied on wood
and pulp, respectively. The former are based on colorless
strains of sapstain fungi. The latter are improved lipases,
including thermostable variants from directed evolution
.
Fermentation
Scale up of fermentation
Steps in scale up
Scale up fermentation process
Optimizing scale up of fermentation process
Rules followed while doing scale up
Studies carried out during scale up
Reference
Batch and Continuous Sterilization of Media in Fermentation Industry Dr. Pavan Kundur
Continuous sterilization is the rapid transfer of heat to medium through steam condensate without the use of a heat exchanger. ... This is more efficient than batch sterilization because instead of expending energy to heat, hold, and cool the entire system, small portions of the inlet streams are heated at a time.
Immobilization techniques are used by the movement of cells and enzymes. First enzyme immobilized in Japan. The immobilized enzyme is aminoacylase. This process is carried out by various methods such adsorption, covalent bonding, cross linking, entrapment, encapsulation. Immobilization of cells is an alternative method for immobilization of enzymes.
Industrial Production of L-Lysine by FermentationKuldeep Sharma
Lysine is an essential amino acid that is used in the biosynthesis of proteins. Lysine is required for the nutrition of animals and humans. Lysine is useful as medicament, chemical agent, food material (food industry) and feed additives (animal food). It's demand has been steadily increasing in recent years. Several thousand tones of L-lysine are annually produced worldwide, almost by microbial fermentation.
±For Education Purpose Only
The term “fermentation” is derived from the Latin verb fervere, to boil, thus describing the appearance of the action of yeast on extracts of fruit or malted grain. The boiling appearance is due to the production of carbon dioxide bubbles caused by the anaerobic catabolism of the sugars present in the extract. However, fermentation has come to have different meanings to biochemists and to industrial microbiologists. Its biochemical meaning relates to the generation of energy by the catabolism of organic compounds, whereas its meaning in industrial microbiology tends to be much broader. Fermentation is a word that has many meanings for the microbiologist: 1 Any process involving the mass culture of microorganisims, either aerobic or anaerobic. 2 Any biological process that occurs in the absence of O2. 3 Food spoilage. 4 The production of
Fermentation
Scale up of fermentation
Steps in scale up
Scale up fermentation process
Optimizing scale up of fermentation process
Rules followed while doing scale up
Studies carried out during scale up
Reference
Batch and Continuous Sterilization of Media in Fermentation Industry Dr. Pavan Kundur
Continuous sterilization is the rapid transfer of heat to medium through steam condensate without the use of a heat exchanger. ... This is more efficient than batch sterilization because instead of expending energy to heat, hold, and cool the entire system, small portions of the inlet streams are heated at a time.
Immobilization techniques are used by the movement of cells and enzymes. First enzyme immobilized in Japan. The immobilized enzyme is aminoacylase. This process is carried out by various methods such adsorption, covalent bonding, cross linking, entrapment, encapsulation. Immobilization of cells is an alternative method for immobilization of enzymes.
Industrial Production of L-Lysine by FermentationKuldeep Sharma
Lysine is an essential amino acid that is used in the biosynthesis of proteins. Lysine is required for the nutrition of animals and humans. Lysine is useful as medicament, chemical agent, food material (food industry) and feed additives (animal food). It's demand has been steadily increasing in recent years. Several thousand tones of L-lysine are annually produced worldwide, almost by microbial fermentation.
±For Education Purpose Only
The term “fermentation” is derived from the Latin verb fervere, to boil, thus describing the appearance of the action of yeast on extracts of fruit or malted grain. The boiling appearance is due to the production of carbon dioxide bubbles caused by the anaerobic catabolism of the sugars present in the extract. However, fermentation has come to have different meanings to biochemists and to industrial microbiologists. Its biochemical meaning relates to the generation of energy by the catabolism of organic compounds, whereas its meaning in industrial microbiology tends to be much broader. Fermentation is a word that has many meanings for the microbiologist: 1 Any process involving the mass culture of microorganisims, either aerobic or anaerobic. 2 Any biological process that occurs in the absence of O2. 3 Food spoilage. 4 The production of
The presentation talks about the basics of bioprocess. Describes what is fermentation? Also lists the different modes of fermentation and the basis for selection of type of reactor. General requirements for a fermentation process. Components of a reactor
Ethanol is nowadays is being regarded as a beverage as well as an important bio fuel. But how is it prepared? It's method of production i.e Fermentation is the key. This presentation has all what you need to know about ethanol fermentation.
Solid state fermentation [fermentation type].pptxSimmi114790
In this you learn about Solid-state fermentation (SSF) involves the growth of microorganisms on moist particles.
briefly about solid state fermentation with advantages and limitation along with steps.
Microbes in climate change
Biogeochemical cycle
Effects of climate on various geological regions
Terrestrial polar regions
Ocean
Fresh water
Agriculture
Soil
ESR spectroscopy in liquid food and beverages.pptxPRIYANKA PATEL
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Seminar of U.V. Spectroscopy by SAMIR PANDASAMIR PANDA
Spectroscopy is a branch of science dealing the study of interaction of electromagnetic radiation with matter.
Ultraviolet-visible spectroscopy refers to absorption spectroscopy or reflect spectroscopy in the UV-VIS spectral region.
Ultraviolet-visible spectroscopy is an analytical method that can measure the amount of light received by the analyte.
Nucleophilic Addition of carbonyl compounds.pptxSSR02
Nucleophilic addition is the most important reaction of carbonyls. Not just aldehydes and ketones, but also carboxylic acid derivatives in general.
Carbonyls undergo addition reactions with a large range of nucleophiles.
Comparing the relative basicity of the nucleophile and the product is extremely helpful in determining how reversible the addition reaction is. Reactions with Grignards and hydrides are irreversible. Reactions with weak bases like halides and carboxylates generally don’t happen.
Electronic effects (inductive effects, electron donation) have a large impact on reactivity.
Large groups adjacent to the carbonyl will slow the rate of reaction.
Neutral nucleophiles can also add to carbonyls, although their additions are generally slower and more reversible. Acid catalysis is sometimes employed to increase the rate of addition.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...Travis Hills MN
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Professional air quality monitoring systems provide immediate, on-site data for analysis, compliance, and decision-making.
Monitor common gases, weather parameters, particulates.
This presentation explores a brief idea about the structural and functional attributes of nucleotides, the structure and function of genetic materials along with the impact of UV rays and pH upon them.
BREEDING METHODS FOR DISEASE RESISTANCE.pptxRASHMI M G
Plant breeding for disease resistance is a strategy to reduce crop losses caused by disease. Plants have an innate immune system that allows them to recognize pathogens and provide resistance. However, breeding for long-lasting resistance often involves combining multiple resistance genes
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
1. SEMESTER – IV
FERMENTATION & INDUSTRIAL
MICROBIOLOGY
SEMINAR TOPIC : FERMENTATION
MEDIA & RAW MATERIALS
Presented by:
BOOMA K
II PG MICROBIOLOGY
Submitted to:
Dr. S. VISWANATHAN
HEAD DEPARTMENT OF
MICROBIOLOGY
2. MEDIA FORMULATION:
• Most fermentations require liquid media, often referred to as
broth, although some solid-substrate fermentations are operated.
• Fermentation media must satisfy all the nutritional requirements
of the microorganism and fulfil the technical objectives of the
process.
• The nutrients should be formulated to promote the synthesis of
the target product, either cell biomass or a specific metabolite.
3. FERMENTATION MEDIUM:
• Most fermentations, except those involving solid substrates, require large quantities of
water in which the medium is formulated.
• General media requirements include a carbon source, which in virtually all industrial
fermentations provides both energy and carbon units for biosynthesis, and sources of
nitrogen, phosphorus and sulphur.
• Other minor and trace elements must also be supplied, and some microorganisms
require addded vitamins, such as biotin and riboflavin.
• Aerobic fermentations are dependent on a continuous input of molecular oxygen, and
even some anaerobic fermentations require initial aeration of media, e.g. beer
fermentations.
• Usually, media incorporate buffers, or the pH is controlled by acid and alkali additions,
and antifoam agents may be required. For some processes, precursor, inducer or
inhibitor compounds must be introduced at certain stages of the fermentation.
4. ADOPTION OF MEDIA:
• The media adopted also depend on the scale of the fermentation.
• For small-scale laboratory fermentations pure chemicals are often used in well-defined
media.
• However, this is not possible for most industrial-scale fermentation processes, simply
due to cost, as mediacomponents may account for up to 60–80% of process
expenditure.
• Industrial-scale fermentations primarily use cost-effective complex substrates, where
many carbon and nitrogen sources are almost undefinable.
• Most are derived from natural plant and animal materials, often byproducts of other
industries, with varied and variable composition.
5. TYPES OF MEDIA:
The particular composition of a fermentation medium can be simple to
complex depending on the particular microorganisms and it’s fermentation.
1. Simple media
2. Complex media
Simple and complex media are futher subdivided into
• Synthetic media
• Crude media
6. SIMPLE MEDIA
• Autotrophic organisms require only the simplest of inorganic medium
such as a few inorganic salts, water and a nitrogen sources, their
carbon requirements is fullfilled by the carbondioxide of the air or by
Carbonates.
• Thus from the simple inorganic nutrients autotrophs are able to
synthesize all of the complex organic compounds required to sustain
life.
• Their total energy requirement for growth and multiplication of the
cells are met by oxidation of some particular inorganic component of
the media.
7. COMPLEX MEDIA:
• On the other hand fastidious organisms lack the ability to
synthesize many of their substrates fot the growth requirements.
• These organisms require the presence of many simple to complex
perforated nutrients in the medium and they must have an organic
carbon supply to provide energy for synthesis of cellular
components and for the release of metabolic energy.
8. SYNTHETIC MEDIA:
• A media which only pure chemicals in definite concentration are
used is called synthetic media or defined medium.
• It contains inorganic salts water, purified sugar and ammonium or
nitrate compounds to Supply combined nitrogen.
• On account on their known chemical composition these media are
used for nutritional and metabolic studies.
• Czapeks Dox medium and Richards solution are the most widely
used synthetic media.Dox
9. ADVANTAGES & DISADVANTAGES OF
SYNTHETIC MEDIA:
Advantages:
• The amount and chemical structure of each
components are known.
• Foaming does not occur , as they fo not
contain any protein or high level of
molecular peptides.
• As the organic components are not involved
in the medium the recovery and purification
of fermentation products would be easier.
•
Disadvantages
• The media can be expensive as
relatively pure ingredients are used.
• Yield derived from this media is low.
10. NON-SYNTHETIC OR CRUDE MEDIA:
• A medium in which the exact chemical composition of each of the constituents are not
known with certainty is refferred to as non-synthetic medium, undefined medium or
crude medium.
• Potato Dextrose Agar, Oat-Meal-Agar, Malt-extract-agar, Waksmans medium are some
of the most widely used non-synthetic media.
• Crude medium allows higher yield of fermentation products as compared to synthetic
media
• An example of crude medium that it contains soyabean, molasses,corn steep
liquor,(NH4)2,SO4,CaCO3,and K2HPO4
• Constituents of crude media are made from a range of sources which are inexpensive
such as agricultural byproducts particularly of carbon substrates.
11. THE MAIN FACTORS THAT AFFECT THE FINAL
CHOICE OF RAW MATERIAL ARE AS FOLLOWS:
1 Cost and availability: ideally, materials should be inexpensive, and of consistent quality and year round
availability.
2 Ease of handling in solid or liquid forms, along with associated transport and storage costs, e.g.
requirements for temperature control.
3 Sterilization requirements and any potential denaturation problems.
4 Formulation, mixing, complexing and viscosity characteristics that may influence agitation, aeration and
foaming during fermentation and downstream processing stages.
5 The concentration of target product attained, its rate of formation and yield per gram of substrate
utilized.
6 The levels and range of impurities, and the potential for generating further undesired products during the
process.
12. CARBON SOURCES:
• A carbon source is required for all biosynthesis leading to reproduction, product formation and cell
maintenance.
• In most fermentations it also serves as the energy source.
• Carbon requirements may be determined from the biomass yield coefficient (Y), an index of the effi-
ciency of conversion of a substrate into cellular material.
•
• For commercial fermentations the determination of yield coefficients for all other nutrients is usually
essential.
• A carbon source is required for all biosynthesis leading to reproduction, product formation and cell
maintenance. In most fermentations it also serves as the energy source.
13. Y VALUE:
• The Y value obtained relates to a specific set of operating conditions; varying
pH,temperature, etc., can alter the yield coefficient.
• Variousorganisms may exhibit different yield coefficients for the same substrate
due primarily to thepathway by which the compound is metabolized.
Differences can also be seen within an individual.
• For example, Saccharomyces cerevisiae grown on glucose has biomass yield
coefficients of 0.56 and 0.12g/g under aerobic and anaerobic conditions,
respectively.
• Animal fats and plant oils may also be encorporated into some media, often as
supplements to the main carbon source
15. *MOLASSES:
• Pure glucose and sucrose are rarely used for industrialscale
fermentations, primarily due to cost. Molasses, a byproduct of cane and
beet sugar production, is a cheaper and more usual source of sucrose.
• This materia lis the residue remaining after most of the sucrose has
been crystallized from the plant extract.
• It is a dark coloured viscous syrup containing 50–60% (w/v)
carbohydrates, primarily sucrose, with 2% (w/v) nitrogenous substances,
along with some vitamins and minerals.
• Overall composition varies depending upon the plant source, the
location of the crop, the climatic conditions under which it was grown
and the factory where it was processed.
• The carbohydrate concentration may be reduced during storage by
contaminating microorganisms.
• A similar product, hydrol molasses,can also be used. This byproduct of
maize starch processing primarily contains glucose.
16. MALT EXTRACT:
• Aqueous extracts of malted barley can be concentrated to form syrups that are
particularly useful carbon sources for the cultivation of filamentous fungi, yeasts
and actinomycetes.
• Extract preparation is essentially the same as for malt wort production in beer
brewing.
• The composition of malt extracts varies to some extent, but they usually contain
approximately 90% carbohydrate, on a dry weight basis. This comprises 20%
hexoses (glucose and small amounts of fructose), 55% disaccharides (mainly
maltose and traces of sucrose), along with 10% maltotriose, a trisaccharide.
• In addition, these products contain a range of branched and unbranched
dextrins (15–20%), which may or maynot be metabolized, depending upon the
microorganism.
• Malt extracts also contain some vitamins and approximately 5% nitrogenous
substances, proteins,peptides and amino acids.
• Sterilization of media containing malt extract must be carefully controlled to
prevent over-heating.
17. STARCH & DEXTRINS:
• These polysaccharides are not as readily utilized as
monosaccharides and disaccharides, but can be directly
metabolized by amylase-producing
microorganisms,particularly filamentous fungi.
• Their extracellular enzymes hydrolyse the substrate to a
mixture of glucose,maltose or maltotriose to produce a
sugar spectrum similar to that found in many malt extracts.
• To allow use in a wider range of fermentations, the starch is
usually converted into sugar syrup, containing mostly
glucose.
• Maize starch is most widely used, but it may also be
obtained from other cereal and root crops.
18. SULPHITE WASTE WATER:
• Sugar containing wastes derived from the paper pulping industry are
primarily used for the cultivation of yeasts.
• Waste liquors from coniferous trees contain 2–3% (w/v) sugar, which is a
mixture of hexoses (80%) and pentoses(20%)
• Hexoses - glucose, mannose and galactose,
• pentoses - xylose and arabinose.
• Those liquors derived from deciduous trees contain mainly pentoses.
• Usually the liquor requires processing before use as it contains sulphur
dioxide.
• The low pH is adjusted with calcium hydroxide or calcium carbonate, and
these liquors are supplemented with sources of nitrogen and phosphorus.
19. CELLULOSE:
• Cellulose is predominantly found as lignocellulose in plant
cell walls, which is composed of three polymers:
• cellulose, hemicellulose and lignin .
• Lignocellulose is available from agricultural, forestry,
industrial and domestic wastes.
• Relatively few microorganisms can utilize it directly, as it is
difficult to hydrolyse.
• The cellulose component is in part crystalline, encrusted
with lignin, and provides little surface area for enzyme
attack.
• At present it is mainly used in solid-substrate fermentations
to produce various mushrooms .
.
20. WHEY:
• Whey is an aqueous byproduct of the dairy industry.
• The annual worldwide production is over 80 million
tonnes,containing over 1 million tonnes of lactose and 0.2
millon tonnes of milk protein.
• This material is expensive to store and transport.
• Lactose is generally less useful as a fermentation
feedstock than sucrose, as it is metabolized by fewer
organisms. S. cerevisiae, for example,does not ferment
lactose.
• This disaccharide was formerly used extensively in
penicillin fermentations and it is still employed for
producing ethanol, single cell protein, lactic acid, xanthan
gum, vitamin B12 and gibberellic acid.
21. ALKANES & ALCOHOLS:
• N-Alkanes of chain length C10–C20 are readily
metabolized by certain microorganisms. Mixtures,
rather than a single compound, are usually most
suitable for microbial fermentations.
• However, their industrial use is dependent upon the
prevailing price of petroleum.
• Methane is utilized as a carbon source by a few
microorganisms, but its conversion product
methanol is often preferred for industrial
fermentations as it presents fewer technical
problems.
22. FATS & OILS:
• Hard animal fats that are mostly composed of glycerides
of palmitic and stearic acids are rarely used in
fermentations.
• However, plant oils (primarily from cotton seed,linseed,
maize, olive, palm and soya) and occasionally fish oil, may
be used as the primary or supplementary carbon source,
especially in antibiotic production.
• Plant oils are mostly composed of oleic and linoleic acids,
but linseed and soya oil also have a substantial amount of
linolenic acid.
• The oils contain more energy per unit weight than
carbohydrates.
23. NITROGEN SOURCES:
• Most industrial microbes can utilize both inorganic and organic nitrogen
sources.
• Inorganic nitrogen may besupplied as ammonium salts, often ammonium
sulphate and diammonium hydrogen phosphate, or ammonia.
• Ammonia can also be used to adjust the pH of the fermentation. Organic
nitrogen sources include amino acids, proteins and urea.
• Nitrogen is often supplied in crude forms that are essentially byproducts
of other industries, such as corn steep liquor, yeast extracts, peptones and
soya meal.
24. CORN STEEP LIQUOR
• Corn steep liquor is a byproduct of starch extraction from maize
and its first use in fermentations was for penicillin production in
the 1940s.
• The exact composition of the liquor varies depending on the
quality of the maize and the processing conditions.
• Concentrated extracts generally contain about 4% (w/v)
nitrogen, including a wide range of amino acids, along with
vitamins and minerals.
• Any residual sugars are usually converted to lactic acid (9–20%,
w/v) by contaminating bacteria.
• Corn steep liquor can sometimes be replaced by similar liquors,
such as those derived from potato starch production.
25. YEAST EXTRACTS:
• Yeast extracts may be produced from waste baker’s
and brewer’s yeast, or other strains of. S.
cerevisiae.
• Alternate sources are Kluyveromyces marxianus
(formerly classified as K. fragilis) grown on whey and
Candida utilis cultivated using ethanol, or wastes
from wood and paper processing.
• Those extracts used in the formulation of
fermentation media are normally salt-free
concentrates of soluble components of hydrolysed
yeast cells.
• Yeast extracts with sodium chloride concentrations
greater than 0.05% (w/v) cannot be used in
fermentation processes due to potential corrosion
problems.
26. PEPTONES:
• Peptones are usually too expensive for large-scale industrial
fermentations. They are prepared by acid or enzyme hydrolysis of high
protein materials: meat, casein, gelatin, keratin, peanuts, soy meal, cotton
seeds, etc.
• Their amino acid compositions vary depending upon the original protein
source.
• For example, gelatin derived peptones are rich in proline and
hydroxyproline, but are almost devoid of sulphur-containing amino acids;
whereas keratin peptone is rich in both proline and cystine, but lacks
lysine.
• Peptones from plant sources invariably contain relatively large quantities
of carbohydrates.
27. SOYA BEAN MEAL:
• Residues remaining after soya beans have
beenprocessed to extract the bulk of their oil
are composed of 50% protein, 8% non-protein
nitrogenous compounds,30% carbohydrates
and 1% oil.
• This residual soya meal is often used in
antibiotic fermentations because the
components are only slowly metabolized,
there by eliminating the possibility of
repression of product formation.
28. WATER:
• All fermentation processes, except solid-substrate fermentations, require vast
quantities of water. In many cases it also provides trace mineral elements.
• water a major component of all media, but it is important for ancillary
equipment and cleaning.
• Before use, removal of suspended solids, colloids and microorganisms is
usually required.
• For some fermentations, notably plant and animal cell culture, the water
must be highly purified.
• Water is becoming increasingly expensive, necessitating its recycle/reusage
wherever possible. This minimizes water costs and reduces the volume
requiring waste-water treatment.
29. MINERALS:
• Normally, sufficient quantities of cobalt, copper,
iron,manganese, molybdenum, and zinc are present in the
water supplies, and as impurities in other media ingredients.
• For example, corn steep liquor contains a wide range of
minerals that will usually satisfy the minor and trace mineral
needs.
• Occasionally, levels of calcium, magnesium, phosphorus,
potassium, sulphur and chloride ions are too low to fulfil
requirements and these may be added as specific salts.
30. VITAMINS & GROWTH FACTORS:
• Many bacteria can synthesize all necessary vitamins from
basic elements.
• For other bacteria, filamentous fungi and yeasts, they must be
added as supplements to the fermentation medium. Most
natural carbon and nitrogen sources also contain at least some
of the required vitamins as minor contaminants.
• Other necessary growth factors, amino acids, nucleotides,
fatty acids and sterols, are added either in pure form or, for
economic reasons, as less expensive plant and animal extracts.
31. INHIBITORS
• Inhibitors are used to redirect metabolism towards the
target product and reduce formation of other metabolic
intermediates; others halt a pathway at a certain point to
prevent further metabolism of the target product.
• An example of an inhibitor specifically employed to
redirect metabolism is sodium bisulphite, which is used in
the production of glycerol by S. cerevisiae.
32. OXYGEN:
• Depending on the amount of oxygen required by the organism, it
may be supplied in the form of air containing about 21% (v/v)
oxygen, or occasionally as pure oxygen when requirements are
particularly high.
• The organism’s oxygen requirements may vary widely depending
upon the carbon source.
• For most fermentations the air or oxygen supply is filter sterilized
prior to being injected into the fermenter.
33. ANTIFOAMS:
• Antifoams are necessary to reduce foam formation during fermentation.
• Foaming is largely due to media proteins that become attached to the
air–broth interface where they denature to form a stable foam.
• If uncontrolled the foam may block air filters, resulting in the loss of
aseptic conditions; the fermenter becomes contaminated and
microorganisms are released into the environment.
• There are three possible approaches to controlling foam production:
modification of medium composition, use of mechanical foam breakers
and addition of chemical antifoams.
• Chemical antifoams are surface active agents which reduce the surface
tension that bindsthe foam together.
34. PROPERTIES OF ANTIFOAMS:
The ideal antifoam should have the following properties:
1 readily and rapidly dispersed with rapid action;
2 high activity at low concentrations;
3 prolonged action;
4 non-toxic to fermentation microorganisms, humans or animals;
5 low cost;
6 thermostability and
7 compatibility with other media components and the process, i.e. having no effect on oxygen transfer rates
or downstream processing operations.
Natural antifoams - plant oils (e.g. from soya,sunflower and rapeseed), deodorized fish oil, mineral oils and
tallow.
The synthetic antifoams - silicon oils, poly alcohols and alkylated glycols.
36. MY FEEL AFTER MY SEMINAR SESSION
• I felt so enhanced after taking seminar.
• I felt some intense happiness.
• I felt giving my cent percent effort.
• I felt improved with my english pronunciation, fluency and the way
I deliver.
• This seminar gives my self confidence.
• Taking seminars encourages me take many more upcoming
seminars.