Electricity using tidal power
•
0 likes•93 views
Paul Katsus has worked for over sixteen years in the electrical generation and distribution field, with experience in coal fired generation plants and tidal energy. He has studied the potential of tidal power, which utilizes the height differences in tides caused by the moon and sun's gravitational influence. Tidal currents can be used to turn turbines connected to electrical generators to produce electricity. Unlike wind turbines, tidal turbines can generate electricity at lower water speeds than wind turbines due to water's higher density. Tidal power is a renewable source that should be more utilized given its predictability compared to wind, making it important for electrical utilities in planning grid forecasts.
Report
Share
Report
Share
Download to read offline
Recommended
Tidal energy
The document discusses tidal energy and its potential prospects in Pakistan. It describes how tidal energy works by exploiting the movement of water from tides. It outlines two main categories of tidal power generation and the tidal process flow. It then provides details on tidal energy resources in Pakistan, including creek systems with high tidal flows that could be used. It discusses some existing tidal power plants and concludes that tidal energy could serve as an alternate energy source in Pakistan with smaller environmental impacts than other options.
14 . Energies sources ( Tidal energy renewable energy ) A Series of Presen...
A Series of Presentation to Class By Mr. Allah Dad Khan Agriculture Free Lance Consultant and Adviser KPK Pakistan
15. Energy sources ( Fourteen main advantages and disadvantages of tidal en...
Tidal energy is a renewable source of energy that harnesses the power of tides. It has several advantages, including being renewable as tides are driven by the gravitational pull of the moon and sun, being a green energy source that doesn't emit greenhouse gases, and having a predictable output. However, tidal energy also has disadvantages such as potentially impacting the environment, only being available when tides are surging for around 10 hours per day so requiring effective energy storage, and being an expensive new technology that is not yet cost-effective.
Sect 17.3
The document discusses various energy sources including fossil fuels like coal, oil and natural gas which were formed from ancient plants. It also discusses renewable sources like solar, wind, hydroelectric and geothermal energy as well as nuclear energy. Fossil fuels are nonrenewable since they are being used faster than they can be replaced, while solar is considered an inexhaustible source since the sun will provide energy for billions of years. The document provides information on how different energy sources work and their advantages and disadvantages.
Thesis' Abstract
The document discusses the construction of a wave energy converter in Greece. It proposes building an overtopping breakwater in the harbor of Heraklion, Crete that would serve the dual purpose of protecting the harbor from waves while also producing electricity from wave energy. The breakwater would work by exploiting running-up waves that overtop into a reservoir and are then returned to the ocean through low-head turbines to generate an estimated 290 MWh of electricity per year, enough to power 83 households. The design is intended to reduce costs compared to conventional breakwaters while helping Greece achieve its renewable energy goals.
Alternative Energy Source Hayden
The document discusses various energy sources, including both dirty sources like fossil fuels and nuclear that cause pollution but are currently cheap, as well as cleaner alternatives like solar, wind, and hydro. It also explores emerging sources such as geothermal, ocean, wave, and potential future sources that harness planetary forces. Finding a long-term sustainable energy solution is a global issue due to interconnectivity, the long timeline to transition, transboundary effects, and importance of meeting increasing power demand.
Green energy
This document discusses various types of green energy, including hydro, wind, solar, nuclear fusion, offshore wind, geothermal, and space-based technologies. It explains that green energy aims to minimize greenhouse gas emissions compared to fossil fuels. The types of green energy are described in detail, along with emerging technologies like smaller modular nuclear reactors, offshore wind farms, and tapping geothermal energy deep beneath the Earth's crust. The document concludes by noting technologies like space-based solar and hydrogen from the moon remain in development.
Need of renewable energy
Renewable energy sources include solar, wind, biomass, tidal, and geothermal energy. They are freely available from nature and can be continuously renewed, unlike conventional energy sources which are limited. Renewable energy sources are needed because conventional sources are limited, costs are increasing, transportation is difficult and costly, and they cause pollution. India has potential to harness energy from solar, wind, biomass, tidal, and geothermal sources. These renewable sources maintain ecological balance and are always available. Solar energy provides 7 kWh/day/square meter but has low density and is not continuous. Wind energy potential varies by location from 8-25 km/hr at seashores, and has been used to generate electricity via
Recommended
Tidal energy
The document discusses tidal energy and its potential prospects in Pakistan. It describes how tidal energy works by exploiting the movement of water from tides. It outlines two main categories of tidal power generation and the tidal process flow. It then provides details on tidal energy resources in Pakistan, including creek systems with high tidal flows that could be used. It discusses some existing tidal power plants and concludes that tidal energy could serve as an alternate energy source in Pakistan with smaller environmental impacts than other options.
14 . Energies sources ( Tidal energy renewable energy ) A Series of Presen...
A Series of Presentation to Class By Mr. Allah Dad Khan Agriculture Free Lance Consultant and Adviser KPK Pakistan
15. Energy sources ( Fourteen main advantages and disadvantages of tidal en...
Tidal energy is a renewable source of energy that harnesses the power of tides. It has several advantages, including being renewable as tides are driven by the gravitational pull of the moon and sun, being a green energy source that doesn't emit greenhouse gases, and having a predictable output. However, tidal energy also has disadvantages such as potentially impacting the environment, only being available when tides are surging for around 10 hours per day so requiring effective energy storage, and being an expensive new technology that is not yet cost-effective.
Sect 17.3
The document discusses various energy sources including fossil fuels like coal, oil and natural gas which were formed from ancient plants. It also discusses renewable sources like solar, wind, hydroelectric and geothermal energy as well as nuclear energy. Fossil fuels are nonrenewable since they are being used faster than they can be replaced, while solar is considered an inexhaustible source since the sun will provide energy for billions of years. The document provides information on how different energy sources work and their advantages and disadvantages.
Thesis' Abstract
The document discusses the construction of a wave energy converter in Greece. It proposes building an overtopping breakwater in the harbor of Heraklion, Crete that would serve the dual purpose of protecting the harbor from waves while also producing electricity from wave energy. The breakwater would work by exploiting running-up waves that overtop into a reservoir and are then returned to the ocean through low-head turbines to generate an estimated 290 MWh of electricity per year, enough to power 83 households. The design is intended to reduce costs compared to conventional breakwaters while helping Greece achieve its renewable energy goals.
Alternative Energy Source Hayden
The document discusses various energy sources, including both dirty sources like fossil fuels and nuclear that cause pollution but are currently cheap, as well as cleaner alternatives like solar, wind, and hydro. It also explores emerging sources such as geothermal, ocean, wave, and potential future sources that harness planetary forces. Finding a long-term sustainable energy solution is a global issue due to interconnectivity, the long timeline to transition, transboundary effects, and importance of meeting increasing power demand.
Green energy
This document discusses various types of green energy, including hydro, wind, solar, nuclear fusion, offshore wind, geothermal, and space-based technologies. It explains that green energy aims to minimize greenhouse gas emissions compared to fossil fuels. The types of green energy are described in detail, along with emerging technologies like smaller modular nuclear reactors, offshore wind farms, and tapping geothermal energy deep beneath the Earth's crust. The document concludes by noting technologies like space-based solar and hydrogen from the moon remain in development.
Need of renewable energy
Renewable energy sources include solar, wind, biomass, tidal, and geothermal energy. They are freely available from nature and can be continuously renewed, unlike conventional energy sources which are limited. Renewable energy sources are needed because conventional sources are limited, costs are increasing, transportation is difficult and costly, and they cause pollution. India has potential to harness energy from solar, wind, biomass, tidal, and geothermal sources. These renewable sources maintain ecological balance and are always available. Solar energy provides 7 kWh/day/square meter but has low density and is not continuous. Wind energy potential varies by location from 8-25 km/hr at seashores, and has been used to generate electricity via
Top 9 Sources of Renewable Energy
The document discusses 9 major sources of renewable energy: waves, tides, wind, sunlight, water, radiant energy, geothermal energy, biomass, and nuclear power. Each source is briefly described, including how it works and some examples of current usage. The largest sources of renewable energy currently are hydroelectricity, biomass, and wind power, which together account for over 30% of global renewable energy production.
Renewable source sadheesh nawaz
The document discusses various renewable energy sources, including solar, wind, hydro, and plant power. It provides details on how these different sources generate electricity. For example, it explains that hydro power uses water flowing through turbines to power generators. Wind power converts the kinetic energy of wind using turbines connected to generators. Solar power can be generated through concentrating solar thermal plants that use mirrors to heat fluid or through photovoltaic panels that convert sunlight directly into electricity. Plant power is an emerging technology that uses living plants to generate electricity through biological and chemical processes in the soil.
Visits to res-recycletodayforabettertomorrow
The document discusses hydropower and renewable energy. It describes a visit by students from Cumhuriyet Secondary School in Kumluca, Turkey to the Alakir Hydro-Electrical Power Plant. The plant was built in 1999 and generates up to 2.2 MW of electricity per month by harnessing the kinetic energy of moving water through turbines connected to generators. Hydropower is highlighted as one of the oldest and most efficient forms of renewable energy, providing clean power without pollution.
Group3.m6 a1
This document discusses alternative energy sources including solar, nuclear, and wind power. It notes that solar power uses heat or light from the sun and is a clean energy source, but is only optimal when sunny. Nuclear power provides 20% of US electricity through splitting uranium atoms, but has safety issues. Wind power utilizes wind to spin blades and generate electricity, which can be used 90% of the time on average. The document argues that these clean, renewable sources should be implemented to reduce carbon emissions and create a sustainable energy future.
The Hierro Island Reservoir
The document describes the Gorona del Viento wind-hydro-pumped power station on El Hierro Island. It consists of 5 wind turbines with a total capacity of 11.5 megawatts that pump water from a lower to upper reservoir. When wind levels drop, the stored water is released through turbines to generate electricity. The upper reservoir is located 380,000 cubic meters inside an inactive volcanic crater 700 meters high. The power station integrates intermittent wind power with pumped hydroelectric storage to provide a stable electricity supply minimizing the use of fossil fuels.
Renewable Energy Sources
Renewable energy sources include sunlight, geothermal heat, tides, wind and biomass. These sources generate clean energy without pollution or climate change. The main types are solar, wind, hydropower, biofuels and geothermal. Solar energy is captured through photovoltaic cells and solar thermal collectors. Wind energy is harnessed via wind turbines in wind farms, and hydropower uses the force of moving water in dams to generate electricity. Biomass and biofuels come from organic matter like plants, and geothermal taps heat from within the earth.
Fundamentals on Renewable Energy Sources - Juan Manuel Gers
This document provides an overview of renewable energy sources including types (photovoltaic, solar thermal, wind, biomass, geothermal, hydro, wave, and tidal), challenges to integration into electrical systems, and applicable standards. It includes sections on generation, transmission, distribution, consumption patterns globally and in the USA, and details on specific renewable technologies with diagrams.
hydroelectricity and generating electricity
Hydroelectricity is generated by harnessing the gravitational force of falling or flowing water to turn turbines and generate electricity. It accounts for 16% of global electricity production. China is the largest producer, generating over 700 terawatt-hours in 2010, mainly from large conventional dams. Small-scale hydroelectric power below 10MW also contributes, especially in developing nations. While hydro is a renewable and low-cost source of electricity, dams can negatively impact local ecosystems.
Wind power
Wind power can be harnessed and converted into electrical energy through the use of wind turbines located offshore in wind farms. Offshore winds tend to flow at higher speeds, allowing turbines to produce more electricity near population centers where energy costs are high and land for wind development is limited. Some advantages of offshore wind farms include access to stronger winds and less interference with human activities on land, while disadvantages include increased construction difficulties and potential navigation hazards for boats.
Renewable Energy(Solar Energy or Photo voltaic Energy)
This slide covers about solar energy.
What is solar energy?
How it works?
How solar cell formed?
Advantages of Solar Energy.
Why we need to use solar energy?
Renewable energy sources
This document discusses the history and types of renewable energy sources. It outlines how early human communities used fire thousands of years ago and wind power was harnessed for sailing ships around 2,000 years ago. The industrial revolution in the 17th-19th centuries relied heavily on fossil fuels. Since 1882, electricity has been generated at central stations using hydropower. The document then lists and describes various renewable sources that can currently be used to generate electricity, including wind, solar, geothermal, tidal, wave, hydroelectric, and biomass power. It emphasizes that renewable sources can replenish themselves indefinitely unlike fossil fuels.
Ericson lake presentation 080628
Ericson lake presentation 080628Windrow Energies, LLC (Providing Renewable Energy Solutions for Communities
The document discusses a wind farm project involving Ericson Lake Corporation, SEArch Inc./Windrow Energies LLC, and Kirkham Michael Associates. It mentions various components of the project including a meteorological tower, transmission infrastructure, wind turbines, and community support for generating wind power on land by 2008. It requests a rate sheet from NPPD on what they will pay for the green energy.Modern trends in Non-conventional energy sources
Modern Trends In Non-Conventional Energy Sources discusses the depletion of conventional energy sources from overuse and the need to adopt renewable alternatives like solar, wind, tidal, and geothermal energy. It describes various non-conventional energy technologies like solar panels, boats, and turbines that harness energy from the sun, wind, and water. The document concludes by advocating for greater use of renewable sources like these to sustain energy resources for future generations.
1009
The document discusses wireless power transmission via solar power satellites. It proposes capturing solar power in space using solar arrays on satellites, and transmitting the power to Earth via microwave beams. This would allow power generation 24/7 without limitations from weather or nighttime. Previous experiments demonstrated wireless power transmission of up to 30kW over short distances with over 85% efficiency. Space-based solar power is preferred over ground-based systems as it can generate power continuously without needing energy storage.
Student 3
Renewable energy sources replenish themselves and include solar, wind, water, waves, tides, biomass, and earth heat. Solar energy comes from the sun's rays and can be converted to heat and electricity. Wind energy is created from uneven heating of the earth creating wind, which can power turbines connected to generators. Hydro energy harnesses the power of water through dams and turbines. Waves and tides also produce hydro energy through predictable tidal patterns that can be captured. Biomass uses biological materials like plant waste to fuel furnaces and generate steam for turbines. Geothermal energy taps into the Earth's internal heat within the crust and deeper.
Generator
1) Generating electrical energy with renewable resources like hydro-electric, wind, and magnetic force generators can help meet the increasing global electricity demand and provide energy to developing countries.
2) A prototype hydro-electric generator was designed that could generate an estimated 35,752.85 watts using a 4-foot tube diameter and 25% efficiency.
3) After evaluating options using a decision matrix, a hydro-electric generator was determined to be the most viable solution for the target areas due to factors like availability and cost.
Study guide
The document provides an overview of different types of alternative energy sources including renewable and non-renewable resources. It discusses key topics such as fossil fuels, nuclear energy, solar energy, wind energy, geothermal energy, hydroelectric energy, and biomass energy. For each type of energy, it covers concepts like energy sources, processes, advantages, disadvantages, and major historical events. The goal is to provide students with essential information to study alternative energy topics.
Next generation power production
Solar power is the best sustainable energy source. The race to harness solar power with different tools and utilize maximum possible potential of solar energy is aggressively increasing.
Renewable energy sources
This presentation is on the topic " Renewable energy sources" which is based on the Chemistry Undergraduate syllabus of Mumbai University.
Offshore wind power presentation for China
This document discusses the growth of offshore wind power in Europe from 2000-2020. It notes that countries like the UK, Germany, Netherlands, Belgium, and Denmark have set targets to significantly increase their offshore wind capacity in the coming decades. Offshore wind farms require advances in turbine size, foundation types, installation/transport methods, and maintenance strategies. The creation of artificial islands and floating harbors could help further develop offshore wind and facilitate an integrated offshore electrical grid across North Sea countries.
Novel technique for hybrid electric vehicle presentation 1
This document describes a novel technique for using supercapacitors in a hybrid electric vehicle to reduce battery stress. It proposes connecting supercapacitors in parallel with the vehicle's batteries. The supercapacitors would supply transient current demands, reducing the battery current drawn by up to 30% and extending the battery lifespan. It provides background on hybrid electric vehicles, supercapacitors, and compares their advantages to batteries. Diagrams show how the proposed energy storage system would operate under different driving conditions.
Enginer Presentation
The document describes a 2-stage plug-in hybrid electric vehicle add-on technology that can be installed in cars' trunks. It claims to improve fuel efficiency to over 100 MPG and allow 40 miles of electric-only range. The system uses two sets of lithium-ion batteries that charge in 4 hours from a standard outlet. Kits starting at $1,995 are said to pay for themselves within a year through gasoline savings and reduce emissions. The manufacturer aims to provide a reliable, affordable, and widely available solution.
More Related Content
What's hot
Top 9 Sources of Renewable Energy
The document discusses 9 major sources of renewable energy: waves, tides, wind, sunlight, water, radiant energy, geothermal energy, biomass, and nuclear power. Each source is briefly described, including how it works and some examples of current usage. The largest sources of renewable energy currently are hydroelectricity, biomass, and wind power, which together account for over 30% of global renewable energy production.
Renewable source sadheesh nawaz
The document discusses various renewable energy sources, including solar, wind, hydro, and plant power. It provides details on how these different sources generate electricity. For example, it explains that hydro power uses water flowing through turbines to power generators. Wind power converts the kinetic energy of wind using turbines connected to generators. Solar power can be generated through concentrating solar thermal plants that use mirrors to heat fluid or through photovoltaic panels that convert sunlight directly into electricity. Plant power is an emerging technology that uses living plants to generate electricity through biological and chemical processes in the soil.
Visits to res-recycletodayforabettertomorrow
The document discusses hydropower and renewable energy. It describes a visit by students from Cumhuriyet Secondary School in Kumluca, Turkey to the Alakir Hydro-Electrical Power Plant. The plant was built in 1999 and generates up to 2.2 MW of electricity per month by harnessing the kinetic energy of moving water through turbines connected to generators. Hydropower is highlighted as one of the oldest and most efficient forms of renewable energy, providing clean power without pollution.
Group3.m6 a1
This document discusses alternative energy sources including solar, nuclear, and wind power. It notes that solar power uses heat or light from the sun and is a clean energy source, but is only optimal when sunny. Nuclear power provides 20% of US electricity through splitting uranium atoms, but has safety issues. Wind power utilizes wind to spin blades and generate electricity, which can be used 90% of the time on average. The document argues that these clean, renewable sources should be implemented to reduce carbon emissions and create a sustainable energy future.
The Hierro Island Reservoir
The document describes the Gorona del Viento wind-hydro-pumped power station on El Hierro Island. It consists of 5 wind turbines with a total capacity of 11.5 megawatts that pump water from a lower to upper reservoir. When wind levels drop, the stored water is released through turbines to generate electricity. The upper reservoir is located 380,000 cubic meters inside an inactive volcanic crater 700 meters high. The power station integrates intermittent wind power with pumped hydroelectric storage to provide a stable electricity supply minimizing the use of fossil fuels.
Renewable Energy Sources
Renewable energy sources include sunlight, geothermal heat, tides, wind and biomass. These sources generate clean energy without pollution or climate change. The main types are solar, wind, hydropower, biofuels and geothermal. Solar energy is captured through photovoltaic cells and solar thermal collectors. Wind energy is harnessed via wind turbines in wind farms, and hydropower uses the force of moving water in dams to generate electricity. Biomass and biofuels come from organic matter like plants, and geothermal taps heat from within the earth.
Fundamentals on Renewable Energy Sources - Juan Manuel Gers
This document provides an overview of renewable energy sources including types (photovoltaic, solar thermal, wind, biomass, geothermal, hydro, wave, and tidal), challenges to integration into electrical systems, and applicable standards. It includes sections on generation, transmission, distribution, consumption patterns globally and in the USA, and details on specific renewable technologies with diagrams.
hydroelectricity and generating electricity
Hydroelectricity is generated by harnessing the gravitational force of falling or flowing water to turn turbines and generate electricity. It accounts for 16% of global electricity production. China is the largest producer, generating over 700 terawatt-hours in 2010, mainly from large conventional dams. Small-scale hydroelectric power below 10MW also contributes, especially in developing nations. While hydro is a renewable and low-cost source of electricity, dams can negatively impact local ecosystems.
Wind power
Wind power can be harnessed and converted into electrical energy through the use of wind turbines located offshore in wind farms. Offshore winds tend to flow at higher speeds, allowing turbines to produce more electricity near population centers where energy costs are high and land for wind development is limited. Some advantages of offshore wind farms include access to stronger winds and less interference with human activities on land, while disadvantages include increased construction difficulties and potential navigation hazards for boats.
Renewable Energy(Solar Energy or Photo voltaic Energy)
This slide covers about solar energy.
What is solar energy?
How it works?
How solar cell formed?
Advantages of Solar Energy.
Why we need to use solar energy?
Renewable energy sources
This document discusses the history and types of renewable energy sources. It outlines how early human communities used fire thousands of years ago and wind power was harnessed for sailing ships around 2,000 years ago. The industrial revolution in the 17th-19th centuries relied heavily on fossil fuels. Since 1882, electricity has been generated at central stations using hydropower. The document then lists and describes various renewable sources that can currently be used to generate electricity, including wind, solar, geothermal, tidal, wave, hydroelectric, and biomass power. It emphasizes that renewable sources can replenish themselves indefinitely unlike fossil fuels.
Ericson lake presentation 080628
Ericson lake presentation 080628Windrow Energies, LLC (Providing Renewable Energy Solutions for Communities
The document discusses a wind farm project involving Ericson Lake Corporation, SEArch Inc./Windrow Energies LLC, and Kirkham Michael Associates. It mentions various components of the project including a meteorological tower, transmission infrastructure, wind turbines, and community support for generating wind power on land by 2008. It requests a rate sheet from NPPD on what they will pay for the green energy.Modern trends in Non-conventional energy sources
Modern Trends In Non-Conventional Energy Sources discusses the depletion of conventional energy sources from overuse and the need to adopt renewable alternatives like solar, wind, tidal, and geothermal energy. It describes various non-conventional energy technologies like solar panels, boats, and turbines that harness energy from the sun, wind, and water. The document concludes by advocating for greater use of renewable sources like these to sustain energy resources for future generations.
1009
The document discusses wireless power transmission via solar power satellites. It proposes capturing solar power in space using solar arrays on satellites, and transmitting the power to Earth via microwave beams. This would allow power generation 24/7 without limitations from weather or nighttime. Previous experiments demonstrated wireless power transmission of up to 30kW over short distances with over 85% efficiency. Space-based solar power is preferred over ground-based systems as it can generate power continuously without needing energy storage.
Student 3
Renewable energy sources replenish themselves and include solar, wind, water, waves, tides, biomass, and earth heat. Solar energy comes from the sun's rays and can be converted to heat and electricity. Wind energy is created from uneven heating of the earth creating wind, which can power turbines connected to generators. Hydro energy harnesses the power of water through dams and turbines. Waves and tides also produce hydro energy through predictable tidal patterns that can be captured. Biomass uses biological materials like plant waste to fuel furnaces and generate steam for turbines. Geothermal energy taps into the Earth's internal heat within the crust and deeper.
Generator
1) Generating electrical energy with renewable resources like hydro-electric, wind, and magnetic force generators can help meet the increasing global electricity demand and provide energy to developing countries.
2) A prototype hydro-electric generator was designed that could generate an estimated 35,752.85 watts using a 4-foot tube diameter and 25% efficiency.
3) After evaluating options using a decision matrix, a hydro-electric generator was determined to be the most viable solution for the target areas due to factors like availability and cost.
Study guide
The document provides an overview of different types of alternative energy sources including renewable and non-renewable resources. It discusses key topics such as fossil fuels, nuclear energy, solar energy, wind energy, geothermal energy, hydroelectric energy, and biomass energy. For each type of energy, it covers concepts like energy sources, processes, advantages, disadvantages, and major historical events. The goal is to provide students with essential information to study alternative energy topics.
Next generation power production
Solar power is the best sustainable energy source. The race to harness solar power with different tools and utilize maximum possible potential of solar energy is aggressively increasing.
Renewable energy sources
This presentation is on the topic " Renewable energy sources" which is based on the Chemistry Undergraduate syllabus of Mumbai University.
What's hot (19)
Fundamentals on Renewable Energy Sources - Juan Manuel Gers
Fundamentals on Renewable Energy Sources - Juan Manuel Gers
Renewable Energy(Solar Energy or Photo voltaic Energy)
Renewable Energy(Solar Energy or Photo voltaic Energy)
Viewers also liked
Offshore wind power presentation for China
This document discusses the growth of offshore wind power in Europe from 2000-2020. It notes that countries like the UK, Germany, Netherlands, Belgium, and Denmark have set targets to significantly increase their offshore wind capacity in the coming decades. Offshore wind farms require advances in turbine size, foundation types, installation/transport methods, and maintenance strategies. The creation of artificial islands and floating harbors could help further develop offshore wind and facilitate an integrated offshore electrical grid across North Sea countries.
Novel technique for hybrid electric vehicle presentation 1
This document describes a novel technique for using supercapacitors in a hybrid electric vehicle to reduce battery stress. It proposes connecting supercapacitors in parallel with the vehicle's batteries. The supercapacitors would supply transient current demands, reducing the battery current drawn by up to 30% and extending the battery lifespan. It provides background on hybrid electric vehicles, supercapacitors, and compares their advantages to batteries. Diagrams show how the proposed energy storage system would operate under different driving conditions.
Enginer Presentation
The document describes a 2-stage plug-in hybrid electric vehicle add-on technology that can be installed in cars' trunks. It claims to improve fuel efficiency to over 100 MPG and allow 40 miles of electric-only range. The system uses two sets of lithium-ion batteries that charge in 4 hours from a standard outlet. Kits starting at $1,995 are said to pay for themselves within a year through gasoline savings and reduce emissions. The manufacturer aims to provide a reliable, affordable, and widely available solution.
Hybrid electric vehicle
This document discusses hybrid vehicles. It defines a hybrid vehicle as one with two or more power sources, such as gasoline-electric. Hybrids optimize fuel efficiency by allowing the internal combustion engine to work efficiently while capturing braking energy. There are three main hybrid architectures: parallel, series, and power split. The power split design, seen in Toyota Prius, is a combination of series and parallel that optimizes power delivery. Hybrids improve fuel economy and reduce emissions but cost more upfront due to additional components like batteries.
Wind turbines Power Point Presentation
Wind turbines convert the kinetic energy of wind into mechanical or electrical energy. They consist of a tower, nacelle, rotor blades, generator, and other components. When wind blows, the rotor blades spin a shaft connecting to a generator inside the nacelle to produce electricity. Wind turbines require a minimum wind speed of 10-15 kph to function and automatically stop at 90 kph for safety. They come in both onshore and offshore varieties, with offshore turbines able to generate more electricity due to more regular winds but being more expensive to install and maintain.
Hybrid electric vehicle
This document discusses hybrid electric vehicles (HEVs). It describes three main HEV drivetrain architectures: series, parallel, and series-parallel. It also discusses different types of electric motor drives used in HEVs, including permanent magnet motors, induction motors, and switched reluctance motors. For energy storage, it covers chemical batteries, ultracapacitors, and hybrid energy storage systems combining the two. In conclusion, it states that HEVs provide a solution to problems like air pollution and are a viable alternative in the short term.
Power Electronics in Electric and Hybrid Vehicles 2014 Report by Yole Develo...
A $16B market by 2023, a change of business model, and significant technical changes: how will electric and hybrid vehicles change the power electronics industry?
EV/HEV MARKET: A BURGEONING MARKET FULL OF PROMISES AND UNCERTAINTIES
Electric and hybrid vehicles have been presented as a huge market over the last few years, but in 2013 only 100K 100% electric vehicles were sold, and only 2M EV/HEV cars in total. For 2014, technological and architectural upgrades have been made and are ready to deploy, but the most important need is still to convince the end-user to change their habits and transition to an EV/HEV.
Charging infrastructure development, battery cost reduction and power density increase are pushing the EV/HEV market forward. Moreover, as the market grows and the technology develops, the price difference between EV/HEV vehicles and gas-powered vehicles will progressively shrink, thus further accelerating EV/HEV market advancement. Also, governmental restrictions on CO2 output are becoming increasingly aggressive worldwide (58mpg for the United States in 2025, and in 2020 for Europe). For all of these reasons, we expect end-users to be swayed by electric energy’s low cost and governmental incentives, making the EV/HEV market very attractive. In this report you will find a detailed analysis of markets by type, as well as an analysis of the positive and negative trends impacting the EV/HEV market.
More information on that report at http://www.i-micronews.com/power-electronics-report/product/power-electronics-in-electric-and-hybrid-vehicles-launch-offer.html
Hotel Design - Midpoint Thesis Book
The document summarizes a proposed hotel project located at 1095 Market Street in San Francisco's Mid-Market neighborhood. The author analyzes the site and surrounding area, noting opportunities for revitalization through new development. Recent influxes of technology companies are improving the neighborhood, though challenges remain. The selected building is currently for sale and suitable for conversion to a hotel given the need in the growing market. The proposed project aims to balance preserving arts culture with new technology through its design concept.
INDUSTRIAL AUTOMATION USING PLC
The use of Computerized or robotic devices to complete manufacturing tasks.
Check on youtube https://www.youtube.com/watch?v=xWDtQ3wEDrQ
Viewers also liked (9)
Novel technique for hybrid electric vehicle presentation 1
Novel technique for hybrid electric vehicle presentation 1
Power Electronics in Electric and Hybrid Vehicles 2014 Report by Yole Develo...
Power Electronics in Electric and Hybrid Vehicles 2014 Report by Yole Develo...
Similar to Electricity using tidal power
Tidal energy
This document provides an overview of tidal power energy as a renewable energy source. It discusses the history and basic principles of how tidal power works, including how tides are caused and different tidal power technologies such as barrages, tidal fences, and tidal turbines. It also covers topics such as tidal resource availability, energy conversion processes, advantages and disadvantages of tidal power, representative tidal power projects around the world, and social attitudes toward tidal power energy.
Tidal power vikas singh
Its about nonrenewiable energy source ; tidal energy. Here we discuss about tidal energy moreover how it,s used. I think its benificial to my friends.
non conventional sources of energy
This document discusses various renewable energy sources including tidal energy, wind energy, hydro power, nuclear energy, and wave energy. It provides details on calculating tidal and wave energy. The document acknowledges those who helped with the project and discusses the importance of energy conservation. It describes different methods of tidal power generation such as tidal stream generators, tidal barrages, and dynamic tidal power. Overall, the document serves as a reference on renewable energy sources with a focus on tidal energy technologies.
Tidal and wave energy
This report discusses the potential contribution that energy derived from the tides and waves can make to overall energy supply in a sustainable way. It covers the topics of wide range like how tides and waves are formed; functions of the possible and popular power generation systems especially tidal barrages,turbines, oscillating water columns and wave farms. Advantages and disadvantages of tidal and wave energy are also briefly discussed. Some cost data’s used give us brief insight into the economic prospects of the tidal and wave energy. By turning to potential along the Indian coastline, we found that India do have a huge potential of tidal and wave energy, though it has started very late. Government
initiatives and extensive research focused on the mentioned relevant opportunities will surely change the energy scenario.
Energy of taruns ppt3
This document discusses various renewable energy sources including tidal energy, wind energy, hydro power, nuclear energy, and wave energy. It provides details on calculating tidal energy and wave energy. The document also includes a poem about conservation of energy and the history of tidal energy. It concludes with an index and acknowledgements section.
Tidal energy
Tidal energy harnesses the kinetic energy of tidal currents and the potential energy of tidal height differences to generate electricity. It is a renewable and predictable source of energy. There are several methods of tidal energy generation including tidal stream generators, tidal barrages, and tidal lagoons. While tidal energy has advantages like being sustainable and producing no emissions, it also has disadvantages such as high initial costs, potential environmental impacts, and limited locations suitable for generation. Overall, tidal energy is a green energy source but still needs technological advancements to become more cost-effective and widely implemented.
Tidal energy
Tidal energy harnesses the kinetic energy of tidal currents and potential energy of high and low tides to generate electricity. There are two main types of tidal power facilities - tidal barrages and tidal current turbines. Tidal barrages utilize potential energy differences by building dams across tidal estuaries, while tidal current turbines capture kinetic energy directly from tidal stream flows using underwater rotors similar to wind turbines. Tidal energy has advantages of being predictable and free once infrastructure is built, but development has been limited by high construction costs and environmental impacts of large-scale barrages.
Ayushassignment5thsem pe
The document provides information about hydroelectric power plants. It discusses the key components of hydroelectric plants including dams, reservoirs, penstocks, turbines, and generators. It explains how hydroelectric plants work by harnessing the potential and kinetic energy of flowing water to turn turbines and generate electricity. The document also provides statistics on global hydroelectric production and discusses the history and environmental impacts of hydroelectric power.
Tidal Energy
This ppt explained the basic concept of Tidal energy , Components of Tidal barrage powerplant, Modes of generation of Tidal power, Tidal stream generator, single and double bassin arrangement, Horizontal & vertical axis Tidal turbine Helical Turbine, Dynamic Tidal powerplant, Environmental impacts and Site selection for tidal powerplant. Also describes the advantages and disadvantages of Tidal powerplant.
Tidel power rajiv
The document discusses tidal energy and its potential as a renewable energy source. It describes how tidal energy can be harnessed from the kinetic energy of tides using tidal turbines or from potential energy differences between high and low tides using barrages. Tidal energy has significant potential due to the predictability of tides and the vast size of the oceans. While tidal power facilities are very expensive to build initially, they have low operating costs and can provide clean, renewable energy for many years. The document examines different tidal power technologies and their advantages for generating reliable, emissions-free electricity from a virtually limitless tidal energy resource.
Wave energy
The document summarizes various wave power conversion systems for producing electrical energy from sea waves. It describes how sea waves are formed and quantifies the power associated with waves. Several devices are then described that extract mechanical energy from waves including oscillating water columns, the Pelamis system, and the Wave Dragon system. The Pelamis system is discussed in more detail, as it consists of articulated cylinders that move with waves to pump hydraulic fluid and drive electric generators. The document concludes that wave power could make a major contribution to renewable energy production.
PPT ON NON-CONVENTIONAL ENERGY SOURCES (Renewable energy resources)
PPT ON NON-CONVENTIONAL ENERGY SOURCES (Renewable energy resources)ANKIT SAXENA Asst. Prof. @ Dr. Akhilesh Das Gupta Institute of Technology and Management, New Delhi
Energy generated by using wind, tides, solar, geothermal heat, and biomass including farm and animal waste is known as non-conventional energy. All these sources are renewable or inexhaustible and do not cause environmental pollution. More over they do not require heavy expenditure.
Natural resources that can be replaced and reused by nature are termed renewable. Natural resources that cannot be replaced are termed nonrenewable.
Renewable resources are replaced through natural processes at a rate that is equal to or greater than the rate at which they are used, and depletion is usually not a worry.
Nonrenewable resources are exhaustible and are extracted faster than the rate at which they formed. E.g. Fossil Fuels (coal, oil, natural gas).
Ocean Energy
Ocean energy harnesses energy from waves, tides, salinity gradients, and ocean thermal differences and has the potential to be a large renewable energy source. It accounts for around 0.1% of global energy production currently but could be developed further. There are two main categories - thermal energy from the sun's heat in surface waters and mechanical energy from tides and waves. Examples of technologies under development include wave farms using turbines on shorelines or floating devices offshore, as well as tidal barrages and tidal stream generators. While ocean energy has advantages of predictability, it also faces challenges of high costs and environmental impacts that need addressing for fuller commercial development.
Alternative sources of energy
This document discusses various renewable energy sources including solar power, wind power, geothermal energy, hydroelectric power, and tidal energy. It provides details on how each works, including converting sunlight to electricity using solar panels, harnessing the kinetic energy of wind with turbines, using underground heat from rocks to create steam and drive turbines, harnessing the power of moving water via dams to turn turbines, and capturing the kinetic energy of ocean tides with underwater turbines. The pros and cons of each type of renewable energy are outlined.
Tidal Energy
This document discusses tidal energy and how it works. It describes how the first tidal power plant was built in 1966 in France and generates 240MW. Tidal power plants harness the energy from tides rising and falling caused by gravitational forces from the moon and sun. There are two main types - tidal barrages which are dams across estuaries and bays, and tidal current turbines which capture the kinetic energy of moving water similar to wind turbines. Tidal power is a renewable source but has high construction costs and may impact aquatic life. It could help reduce greenhouse gas emissions from other power sources.
Alternative energy
There are many renewable sources of energy that are more environmentally friendly alternatives to traditional power sources. These include tidal power, which can be generated from tidal stream generators or barrages and has potential for future electricity needs. Wave power generates energy from the motion of ocean waves using floating devices. Solar power harnesses energy from the sun using photovoltaic cells, while wind power uses wind turbines to generate electricity from wind. Hydroelectric power utilizes the gravitational force of falling or flowing water to generate electricity through dams and other means.
Renewable energy
This file is made by me using different books and different sites. As I forgot to note down the name of the books and sites, so these are not given here. Sorry for this but hope it will be helpful for you.
ress.pptx
This document discusses biomass and how it can be used to generate renewable energy. It defines biomass as organic material from recently dead plants and animals. Energy from the sun is stored in biomass through photosynthesis. There are three main ways to generate energy from biomass: burning it to produce steam, bacterial decomposition to produce methane, and conversion to gas or liquid fuels. Biomass can be burned directly in boilers or co-fired with coal to power generators and produce electricity. Tidal energy is also discussed, which uses the rising and falling tides to power generators through tidal barrages or tidal stream turbines.
Tidal Energy.pptx
This document discusses tidal energy and tidal power plants. It defines tidal energy as a form of hydropower that converts the energy of tides into electricity. Tides are caused by the gravitational pull of the moon and sun, causing the periodic rise and fall of ocean water levels twice per lunar day. Tidal power plants consist of a tidal barrage to hold back water, sluice gates to control water flow, and turbines that generate electricity as water flows in and out with the tides. The document outlines advantages such as being a renewable source and having predictable tides, and disadvantages including high construction costs and potential environmental impacts. Major existing tidal power plants worldwide are also briefly mentioned.
Tidal1
Tidal energy harnesses the potential and kinetic energy of tides. It is caused by gravitational forces from the moon and sun. There are two types of tides - spring and neap. Tidal energy can be extracted via tidal barrages or tidal stream generators. India has significant tidal energy potential, especially along its western and eastern coasts. While tidal energy is renewable and predictable, the initial costs are high and locations suitable for tidal projects are limited. It is seen as an important future energy source due to its large capacity and renewable nature.
Similar to Electricity using tidal power (20)
PPT ON NON-CONVENTIONAL ENERGY SOURCES (Renewable energy resources)
PPT ON NON-CONVENTIONAL ENERGY SOURCES (Renewable energy resources)
More from Paul Katsus
Toastmasters - From Local Club to World-Renowned Nonprofit
Consulting professional Paul Katsus, a longtime Texas resident, holds a BS in marketing and management from Houston Baptist University. Committed to continuing education and honing his business skills, Paul Katsus is actively involved with industry organizations and with Toastmasters International.
Atlantic Goliath Grouper
The monster fish of reef is the Atlantic Goliath Grouper. The world record caught off the Florida coast weighed a staggering 680 pounds.
Dorado - Perhaps the Ultimate Freshwater Fish
The Dorado is an aggressive freshwater fish known for its acrobatic skills, razor sharp teeth, and incredible strength. It can grow up to 50 pounds with an enormous head full of small, sharp teeth. As a schooling fish that feeds on other fish, the Dorado will readily attack lures and flies resembling prey. Due to its leaping ability, strength, and stamina, it is considered the ultimate freshwater gamefish. The current IGFA world record Dorado weighed 55 pounds 11 ounces, caught in Uruguay in 2006.
Blue catfish
The Blue Catfish is the largest of the catfish species, often reaching weights of over 100 pounds. Blue Catfish are most everywhere in the US. and often excellent sport and table fare.
Morgan plus 8
The Morgan Plus 8 is one of those wonderful British sports cars that remains a classic for holding to the traditional values of sports cars we formed in our minds when we were young.
Buffalo Carp
The Carp is not one of the most sought after fresh water fish but it is well regarded in Europe and Asia as a game fish. Hook into one of these freshwater giants and you see what you've been missing!
Porsche 928
The Porsche 928 was Porsche's only V-8 powered front engine car produced. The Porsche 928 was originally intended to be a replacement for the 911 model but for true believers the model would never be a true Porsche.
Mercury Cyclone - by Paul Katsus
Paul Katsus studies and documents sports cars and muscle cars from the 1960s-1970s. In 1969, Mercury produced the Cyclone CJ muscle car with the 428 Cobra Jet engine to compete with the Dodge GTX and Plymouth Road Runner. The Cyclone CJ could reach over 100 MPH and quarter mile times of under 14 seconds. Mercury only sold around 2,175 Cyclone CJ models that year. The rare Super Cobra Jet option included an upgraded engine with stronger components. Paul Katsus considers the 1969 Mercury Cyclone to be one of the most collectible Mercury models.
Bluegills Are Great For Beginning Fishermen - by Paul Katsus
For a beginning fisherman, Bluegill are tough to beat. Bluegills are found in most bodies of freshwater and are easy to catch. Paul Katsus would also like to point out, they excellent table fare.
Jensen Interceptor
The Jensen Interceptor was a British 2 +2 GT car that blended American muscle with British luxury. The American V-8 power was provided by Chrysler big block high performance motors.
Ferrari Daytona
Paul Katsus has always rated the Ferrari Daytona as his favorite sports car of all time. The Ferrari Daytona was officially named the 365 GTB/4 by Ferrari and produced from 1968 to 1973, with a maximum speed of 174 mph. In 1971, famous race car drivers Brock Yates and Dan Gurney drove a Daytona in the Cannonball Baker Sea to Shining Sea Memorial Trophy Dash cross-country race, winning in just 35 hours and 54 minutes with an average speed of 80.1 mph. The Ferrari Daytona is considered one of the top classic cars of all time by experts and collectors.
Bmw M1
The BMW M1 is highly collectable car. Originally started as joint project with Lamborghini but because of financial problems the M1 was completely taken over by BMW. The wedge type styling influence of Lamborghini is clearly evident.
Clean coal and the environment
Coal is a cheap source of fuel for electrical generation that can be used cleanly using the latest clean coal technology.
Shelby Mustang GT500 KR
In April 1968 Shelby released a new model mustang known as the GT500 KR. The car featured the new Cobra Jet 428 cubic inch engine - producing 440 foot pounds of torque and underrated at 335 hp (common at the time for insurance purposes). Like all Shelby Mustangs, standard features included a padded roll bar with special seat belts, 1 40 MPH speedometer,various weight saving fiberglass body parts, reinforced shock towers, and many other performance enhancements.
TVR Cars
TVR the small British car company is back in business and taking deposits. The new car will come equipped with a Cosworth sourced engine.
Ac cars ltd is the exclusive marketing
The original car company that produced the bodies for the AC Shelby Cobra will now be selling in the USA
Minnows for bait
Minnows are an excellent year around bait. A Simple but effective way to catch many varieties of fish. With the tips in this article anyone will know they are using the right bait at the right time.
Low Cost Fishing For Giants
Carp fishing can be the key to enjoying the pursuit of large fish without the high costs usually associated the sport.
Houston United Way Promotes Literacy with Tiny Libraries
Volunteers with the United Way of Greater Houston recently built over 50 small outdoor libraries, resembling large bird houses, to promote literacy among children under 12. Known as Tiny Libraries, the project aims to improve literacy rates by placing the book-filled boxes in schools and other United Way facilities serving communities in need. The United Way initiated the Tiny Libraries project as part of its literacy efforts, with support from the new volunteer organization LINC, whose members helped construct the small libraries boxes.
Colorado dispute over solar power reflects national trend
A rate dispute between an electricity cooperative that serves a large swath of Colorado and its residential solar power customers is part of a national conflict between the utilities and the solar industry.
More from Paul Katsus (20)
Toastmasters - From Local Club to World-Renowned Nonprofit
Toastmasters - From Local Club to World-Renowned Nonprofit
Bluegills Are Great For Beginning Fishermen - by Paul Katsus
Bluegills Are Great For Beginning Fishermen - by Paul Katsus
Houston United Way Promotes Literacy with Tiny Libraries
Houston United Way Promotes Literacy with Tiny Libraries
Colorado dispute over solar power reflects national trend
Colorado dispute over solar power reflects national trend
Recently uploaded
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...