Online Condition Monitoring And Diagnosis Of Power Transformers Their Bushin...vvsatyanarayana K
A bushing must be designed to withstand the electrical field strength produced in the insulation, when any earthed material is present
In a Oil-filled power transformers, their bushings, tap changer, insulation system and auxiliary equipment are critical to the operation of every electrical power system to such an extend that their reliable and uninterrupted functioning is a key factor in profitable generation, transmission and distribution.
Recent years on-line monitoring systems have been installed in a large scale at power transformers.
Seminar for eight semester electrical engineering on Conventional and
Un-Conventional Partial Discharge Detection Methods in High Voltage XLPE Cable Accessories
In-Country Training
On
Operation, Maintenance, Protection & Control of 33/11 kV Substation
Project Name: Design, Supply, Installation, Testing & Commissioning of 33/11 kV sub-stations with source end feeder bays.
Contract No: BREB/UREDS/W-01A-001/02/2016-2017
BREB/UREDS/W-01A-002/03/2016-2017
BREB/UREDS/W-01A-004/04/2016-2017
Online Condition Monitoring And Diagnosis Of Power Transformers Their Bushin...vvsatyanarayana K
A bushing must be designed to withstand the electrical field strength produced in the insulation, when any earthed material is present
In a Oil-filled power transformers, their bushings, tap changer, insulation system and auxiliary equipment are critical to the operation of every electrical power system to such an extend that their reliable and uninterrupted functioning is a key factor in profitable generation, transmission and distribution.
Recent years on-line monitoring systems have been installed in a large scale at power transformers.
Seminar for eight semester electrical engineering on Conventional and
Un-Conventional Partial Discharge Detection Methods in High Voltage XLPE Cable Accessories
In-Country Training
On
Operation, Maintenance, Protection & Control of 33/11 kV Substation
Project Name: Design, Supply, Installation, Testing & Commissioning of 33/11 kV sub-stations with source end feeder bays.
Contract No: BREB/UREDS/W-01A-001/02/2016-2017
BREB/UREDS/W-01A-002/03/2016-2017
BREB/UREDS/W-01A-004/04/2016-2017
Cable sizing to withstand short-circuit current - ExampleLeonardo ENERGY
A short circuit causes very extreme stresses in a cable which are proportional to the square of the current:
A temperature rise in the conducting components such as conductor, screen, metal sheath, armour. Indirectly the temperature of adjoining insulation and protective covers also increases,
electro-magnetic forces between the current-carrying components.
The temperature rise is important for its effect on ageing, heat pressure characteristics etc. and should be limited to a permissible short-circuit temperature. The thermo-mechanical effects of the current shall also be considered.
For the given short-circuit condition the short-circuit capacity of a cable should be investigated with respect to all these parameters. For multi-core cables in most instances the thermal effect - related to the magnitude of fault current and clearance time - is the critical parameter, since the cable will normally have enough mechanical strength. With single-core cables however the mechanical effect - related to the magnitude of the peak short-circuit current - is of such significance that, next to the thermal, the mechanical strength of both cable and its supports should be investigated.
Also accessories must be rated with respect to thermal and mechanical short-circuit stresses.
The short circuit strength of a cable system is not quantitatively defined with regard to permissible number of repeated short circuits, degree of deformation or destruction or impairment quality. It is expected, however, that a cable installation will remain safe in operation and that any deformation remains within tolerable limits even after several short circuits.
This course provides practical overview of short circuit performance of a cable.
Installation Operation & Maintenance of 33kV & 11kV SwitchgearSheikh Nazmul Islam
In-Country Training On Operation, Maintenance, Protection & Control of 33/11 kV Substation Project Name: Design, Supply, Installation, Testing & Commissioning of 33/11 kV sub-stations with source end feeder bays. Contract No: BREB/UREDS/W-01A-001/02/2016-2017 BREB/UREDS/W-01A-002/03/2016-2017 BREB/UREDS/W-01A-004/04/2016-2017
This Presentation is about l.v switch gear design, presented during the graduation project final discussion 15/7/2018.
It presented a good summary of switch gear components and types and practicing on AL.HAMOOL W.T.P M.D.B design using SIEMENS SIVACON S8
Cable sizing to withstand short circuit currentLeonardo ENERGY
In a cable a short circuit causes very extreme stresses which are proportional to the square of the current:
• A temperature rise in the conducting components subjected to current flow such as conductor, screen, metal sheath, armour. Indirectly the temperature of adjoining insulation and protective covers also increases,
• electro-magnetic forces between the current-carrying components.
The temperature rise is important for its effect on ageing, heat pressure characteristics etc., and should be limited to a permissible short-circuit temperature. The thermo-mechanical effects of the current shall also be considered.
For a given short-circuit duty therefore the short-circuit capacity of a cable installation is to be investigated with respect to all these parameters. For multi-core cables in most instances the thermal effect - related to the magnitude of fault current and clearance time - is the critical parameter, since the cable will normally have enough mechanical strength. With single-core cables however, in addition, the mechanical effect - related to the magnitude of the peak short-circuit current - is of such significance that, next to the thermal, the mechanical with- stand of both cable and its supports is to be investigated.
Also accessories must be rated with respect to thermal and mechanical short-circuit stresses.
The short-circuit withstand of a cable system is not quantitatively defined with regard to permissible number of repeated short circuits, degree of deformation or destruction or impairment quality. It is expected, however, that a cable installation will remain safe in operation and that any deformation remains within tolerable limits even after several short circuits.
Partial Discharge Detection Products by EA TechnologyRyan McFallo
EA Technology is the global leader in MV Partial Discharge detection. EA’s unique technology allows real time partial discharge detection and monitoring without interrupting service, EA also provides on-site partial discharge surveys.
Would you like to learn more about partial discharge detection and monitoring products/services?
Visit Technical Sales-Northwest at http://www.techsalesnw.com
Cable sizing to withstand short-circuit current - ExampleLeonardo ENERGY
A short circuit causes very extreme stresses in a cable which are proportional to the square of the current:
A temperature rise in the conducting components such as conductor, screen, metal sheath, armour. Indirectly the temperature of adjoining insulation and protective covers also increases,
electro-magnetic forces between the current-carrying components.
The temperature rise is important for its effect on ageing, heat pressure characteristics etc. and should be limited to a permissible short-circuit temperature. The thermo-mechanical effects of the current shall also be considered.
For the given short-circuit condition the short-circuit capacity of a cable should be investigated with respect to all these parameters. For multi-core cables in most instances the thermal effect - related to the magnitude of fault current and clearance time - is the critical parameter, since the cable will normally have enough mechanical strength. With single-core cables however the mechanical effect - related to the magnitude of the peak short-circuit current - is of such significance that, next to the thermal, the mechanical strength of both cable and its supports should be investigated.
Also accessories must be rated with respect to thermal and mechanical short-circuit stresses.
The short circuit strength of a cable system is not quantitatively defined with regard to permissible number of repeated short circuits, degree of deformation or destruction or impairment quality. It is expected, however, that a cable installation will remain safe in operation and that any deformation remains within tolerable limits even after several short circuits.
This course provides practical overview of short circuit performance of a cable.
Installation Operation & Maintenance of 33kV & 11kV SwitchgearSheikh Nazmul Islam
In-Country Training On Operation, Maintenance, Protection & Control of 33/11 kV Substation Project Name: Design, Supply, Installation, Testing & Commissioning of 33/11 kV sub-stations with source end feeder bays. Contract No: BREB/UREDS/W-01A-001/02/2016-2017 BREB/UREDS/W-01A-002/03/2016-2017 BREB/UREDS/W-01A-004/04/2016-2017
This Presentation is about l.v switch gear design, presented during the graduation project final discussion 15/7/2018.
It presented a good summary of switch gear components and types and practicing on AL.HAMOOL W.T.P M.D.B design using SIEMENS SIVACON S8
Cable sizing to withstand short circuit currentLeonardo ENERGY
In a cable a short circuit causes very extreme stresses which are proportional to the square of the current:
• A temperature rise in the conducting components subjected to current flow such as conductor, screen, metal sheath, armour. Indirectly the temperature of adjoining insulation and protective covers also increases,
• electro-magnetic forces between the current-carrying components.
The temperature rise is important for its effect on ageing, heat pressure characteristics etc., and should be limited to a permissible short-circuit temperature. The thermo-mechanical effects of the current shall also be considered.
For a given short-circuit duty therefore the short-circuit capacity of a cable installation is to be investigated with respect to all these parameters. For multi-core cables in most instances the thermal effect - related to the magnitude of fault current and clearance time - is the critical parameter, since the cable will normally have enough mechanical strength. With single-core cables however, in addition, the mechanical effect - related to the magnitude of the peak short-circuit current - is of such significance that, next to the thermal, the mechanical with- stand of both cable and its supports is to be investigated.
Also accessories must be rated with respect to thermal and mechanical short-circuit stresses.
The short-circuit withstand of a cable system is not quantitatively defined with regard to permissible number of repeated short circuits, degree of deformation or destruction or impairment quality. It is expected, however, that a cable installation will remain safe in operation and that any deformation remains within tolerable limits even after several short circuits.
Partial Discharge Detection Products by EA TechnologyRyan McFallo
EA Technology is the global leader in MV Partial Discharge detection. EA’s unique technology allows real time partial discharge detection and monitoring without interrupting service, EA also provides on-site partial discharge surveys.
Would you like to learn more about partial discharge detection and monitoring products/services?
Visit Technical Sales-Northwest at http://www.techsalesnw.com
MV Switchgear provides centralized control and protection of medium-voltage power equipment and circuits in industrial, commercial, and utility installations involving generators, motors, feeder circuits, and transmission and distribution lines.
Catalog: Inverter FR-E700 Mitsubishi
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Department of Space ,Electrical Contractors, Equipment Manufacturing, Launching Systems,Controls,Monitoring and Electrical Systems, Design and development DRDO
Department of Space ,Electrical Contractors, Equipment Manufacturing, Launching Systems,Controls,Monitoring and Electrical Systems, Design and development DRDO
Comparision Lightning Protection Systems s per IEC 62305-3 and NFC 17-102(2011)/UNE21-1186 India NBC2016 / Project Building and Infra Projects /MEP ,Architect ,Electrical Consultants
Similar to Electrical Condition monitoring part 1 (20)
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.