2. The DTX advantage: Enhance the power of DTX.
speed, performance and accuracy.
Significantly reduces total time to certify. The DTX CableAnalyzer:
Test and certify 10 Gig Ethernet over copper
The DTX CableAnalyzer’s powerful The DTX Digital CableAnalyzer Series gives a visionary approach to testing. The DTX 10 Gig over Copper Test Solution enables testing and certification of twisted pair
features, speed, and revolutionary you a complete solution that streamlines
cabling for 10 Gigabit Ethernet deployments – whether it is a Cat 6 or Augmented Cat 6
platform make you more efficient and pro- every aspect of the certification job –
cabling system. The DTX-10GKIT, together with DTX-1800 CableAnalyzer, is the first field test
ductive – and you can see the results on from setup, to record-fast testing and
solution that measures performance for 10 Gig and Alien Crosstalk (ANEXT and AFEXT) in full
the bottom line. It’s all troubleshooting, to reporting results
compliance with the industry standards to 500 MHz.
about time – and no other tester to the customer. All told, DTX can save
Level IV Accuracy – Bandwidth support to
delivers like DTX. you considerable time and money – Exceeds spec requirements for 900 MHz – supports video
Test and certify 10 Meg to 10 Gig Ethernet over fiber
up to four hours a day. Cat 6 and beyond. distribution, Class F, and
• Increase productivity from day one. With optional on-board fiber modules and the DTX Compact OTDR, complete fiber certifica-
10 Gigabit Ethernet.
Intuitive interface means your techs Cat 6 certification in Fiber ready at all times – tion is ready whenever you need it. Our certification solution includes loss length, polarity
spend less time in training and more 9 seconds optional fiber loss/length test 9-second Cat 6 Autotest – measurements and fiber traces. You can validate fiber link performance and installation quality
time testing. The DTX-1200 and DTX-1800 perform Cat 6 whether the problem has been resolved – modules and Compact OTDR speeds you through testing as well as locate sources of loss and reflectance. Measure optical loss at multiple wavelengths
the technician knows exactly where to look module fit snug and protected three times faster than any
certification tests in just 9 seconds – without swapping near and far-end units. Perform a single-end OTDR test to identify latent
• Certify 10 Gig Performance. in DTX module cavity. other tester.
in full compliance with industry standards and what to do to fix the failing link. Even problems in a fiber link. The only cable tester that lets you switch between copper and fiber
The DTX-1800 with DTX 10 Gig Kit
and with superior accuracy. That’s several if only two percent of the cables certified Large color display with with the touch of a button or perform a comprehensive suite of tests from one platform.
measures the performance for 10 Gigabit
times faster than existing testers. This in one shift fail Autotest, you’ll save as bright backlight for easy
Ethernet and Alien Crosstalk (ANEXT and
much as two hours of labor time per day viewing.
AFEXT) in full compliance with industry
incredible speed means you can test up Verify network service availability
to 170 more links in an eight-hour shift. of certifying. Improve the services you offer your customers with the DTX CableAnalyzer and Network Service
standards to 500 MHz. Advanced time-saving 12-second fiber Autotest –
diagnostics pinpoint performs dual fiber, dual- Module (DTX-NSM). Simply plug the DTX-NSM module into the back of the main unit and you’re
• Zero to certified in 9 seconds. Troubleshoot faults Fast even when you’re problems anywhere on the link wavelength certification test. ready to verify network service availability and link connectivity up to 1 Gigabit Ethernet.
This unheard-of Cat 6 test speed lets you twice as fast not testing and suggest corrective action Verify if a link is active, identify its data rate, duplex capabilities and whether power is avail-
move from link to link three times faster When a link fails, the DTX Series provides Save full graphical test
The DTX Series isn’t just a faster way to to help you get the job done able for PoE. Then document all the network connectivity tests executed as an integrated part
quick, easy-to-understand directions to results to Fluke Networks‘
than with previous testers. test. It cuts setup and reporting times. Its on time.
LinkWare PC software. of the cable certification documentation provided by LinkWare.
identify the point of failure (distance from
• Level IV Accuracy. Get the most ease-of-use lowers training time. Extended
the tester) and the possible reason(s) for Field tough Permanent Link
accurate test results in the shortest pos- battery life means you can do more on a USB Port for high-speed
Adapter delivers repeatable Test cabling with Midspan PSEs for POE applications
the failure. test data downloads.
sible time. single charge. And a bright color display, accuracy and Cat 5e, Cat 6 and Midspan power sources block DC power from traveling to the Ethernet switch or other active
These directions not only tell you the Cat 6A interoperability.
ample memory, and built-in talk set all Portable, lightweight equipment in the wiring closet. This prohibits Wiremap tests of the link with conventional DC
• 900 MHz frequency range. Prepares you problem, but also identify corrective actions
contribute to overall productivity while ergonomic design for test methods. The DTX Series CableAnalyzer has the capability to test cabling using AC signals.
for future applications, such as your test technicians can take to solve the 12-hour battery life –
enhancing the user experience. This all easy field use.
10 Gigabit Ethernet, Class F and CATV. Lithium ion battery provides full This unique feature allows full certification to ISO and TIA standards where Midspan Power
problem quickly – all without having to
adds up to save you time and money day of testing. over Ethernet supplies are used.
consult the project manager. Instead of Rotary knob makes learning
• Advanced time-saving diagnostics. every day. easy and operation simple –
Pinpoints the location of a failure spending time executing trial and error Internal memory stores up
you always know what test Certify patch cord performance
and is the only tester that suggests cor- corrections – and re-testing to find out to 250 graphical Cat 6 test
mode is selected. Test patch cords to ensure optimal network performance with greater channel throughput and
rective action, saving trouble- results or up to 2000 reports in
text format. greater system margin. Attach the optional DTX Patch Cord Adapters (DTX-PCU6S) to the DTX
shooting time.
Complete the job 33% faster with DTX main and remote units and you’re ready to certify patch cord performance to TIA Cat 6/5e
• Complete fiber certification 12 Memory Card for instant
specifications and also ISO class D/E.
10 data hand-off – Talk feature saves time by allowing Rugged overmold bonded to
Certifies fiber to Tier 1 (Basic) and Tier 2 DTX saves 2 hours in
5.0 troubleshooting time each multiple of 128 MB stores you to communicate with your test case stands up to tough field
(Extended) specifications using DTX Fiber 8 2000 Cat 6 graphical link test Test coaxial cable quickly and easily
partner at the other end of the link conditions.
Hours
Modules and the DTX Compact OTDR. 6 3.0 results. over both copper and fiber. Extend the capabilities of your DTX CableAnalyzer to test coaxial cabling systems including
• 12-hour battery life. Gives you the 3.5 legacy data cabling (such as 10BASE-2 or 10BASE-5 Ethernet) and video distribution coaxial
4
power to complete any job. 3.5 cabling. Test coax cable length, propagation delay, cable (input) impedance and insertion loss
2 3.0
DTX is
3x faster
1.0 as a function of signal frequency.
• Save time managing results. 0
Today’s Testers DTX
From setup to reporting, LinkWare™ Cable
Total Time To Certify 300 Links
Test Management Software‘s user inter-
Troubleshoot Move Test
face and time-saving features increase
DTX-1800 with DTX 10 Gig Kit to test
productivity. Alien Crosstalk performance
3. The DTX advantage: Enhance the power of DTX.
speed, performance and accuracy.
Significantly reduces total time to certify. The DTX CableAnalyzer:
Test and certify 10 Gig Ethernet over copper
The DTX CableAnalyzer’s powerful The DTX Digital CableAnalyzer Series gives a visionary approach to testing. The DTX 10 Gig over Copper Test Solution enables testing and certification of twisted pair
features, speed, and revolutionary you a complete solution that streamlines
cabling for 10 Gigabit Ethernet deployments – whether it is a Cat 6 or Augmented Cat 6
platform make you more efficient and pro- every aspect of the certification job –
cabling system. The DTX-10GKIT, together with DTX-1800 CableAnalyzer, is the first field test
ductive – and you can see the results on from setup, to record-fast testing and
solution that measures performance for 10 Gig and Alien Crosstalk (ANEXT and AFEXT) in full
the bottom line. It’s all troubleshooting, to reporting results
compliance with the industry standards to 500 MHz.
about time – and no other tester to the customer. All told, DTX can save
Level IV Accuracy – Bandwidth support to
delivers like DTX. you considerable time and money – Exceeds spec requirements for 900 MHz – supports video
Test and certify 10 Meg to 10 Gig Ethernet over fiber
up to four hours a day. Cat 6 and beyond. distribution, Class F, and
• Increase productivity from day one. With optional on-board fiber modules and the DTX Compact OTDR, complete fiber certifica-
10 Gigabit Ethernet.
Intuitive interface means your techs Cat 6 certification in Fiber ready at all times – tion is ready whenever you need it. Our certification solution includes loss length, polarity
spend less time in training and more 9 seconds optional fiber loss/length test 9-second Cat 6 Autotest – measurements and fiber traces. You can validate fiber link performance and installation quality
time testing. The DTX-1200 and DTX-1800 perform Cat 6 whether the problem has been resolved – modules and Compact OTDR speeds you through testing as well as locate sources of loss and reflectance. Measure optical loss at multiple wavelengths
the technician knows exactly where to look module fit snug and protected three times faster than any
certification tests in just 9 seconds – without swapping near and far-end units. Perform a single-end OTDR test to identify latent
• Certify 10 Gig Performance. in DTX module cavity. other tester.
in full compliance with industry standards and what to do to fix the failing link. Even problems in a fiber link. The only cable tester that lets you switch between copper and fiber
The DTX-1800 with DTX 10 Gig Kit
and with superior accuracy. That’s several if only two percent of the cables certified Large color display with with the touch of a button or perform a comprehensive suite of tests from one platform.
measures the performance for 10 Gigabit
times faster than existing testers. This in one shift fail Autotest, you’ll save as bright backlight for easy
Ethernet and Alien Crosstalk (ANEXT and
much as two hours of labor time per day viewing.
AFEXT) in full compliance with industry
incredible speed means you can test up Verify network service availability
to 170 more links in an eight-hour shift. of certifying. Improve the services you offer your customers with the DTX CableAnalyzer and Network Service
standards to 500 MHz. Advanced time-saving 12-second fiber Autotest –
diagnostics pinpoint performs dual fiber, dual- Module (DTX-NSM). Simply plug the DTX-NSM module into the back of the main unit and you’re
• Zero to certified in 9 seconds. Troubleshoot faults Fast even when you’re problems anywhere on the link wavelength certification test. ready to verify network service availability and link connectivity up to 1 Gigabit Ethernet.
This unheard-of Cat 6 test speed lets you twice as fast not testing and suggest corrective action Verify if a link is active, identify its data rate, duplex capabilities and whether power is avail-
move from link to link three times faster When a link fails, the DTX Series provides Save full graphical test
The DTX Series isn’t just a faster way to to help you get the job done able for PoE. Then document all the network connectivity tests executed as an integrated part
quick, easy-to-understand directions to results to Fluke Networks‘
than with previous testers. test. It cuts setup and reporting times. Its on time.
LinkWare PC software. of the cable certification documentation provided by LinkWare.
identify the point of failure (distance from
• Level IV Accuracy. Get the most ease-of-use lowers training time. Extended
the tester) and the possible reason(s) for Field tough Permanent Link
accurate test results in the shortest pos- battery life means you can do more on a USB Port for high-speed
Adapter delivers repeatable Test cabling with Midspan PSEs for POE applications
the failure. test data downloads.
sible time. single charge. And a bright color display, accuracy and Cat 5e, Cat 6 and Midspan power sources block DC power from traveling to the Ethernet switch or other active
These directions not only tell you the Cat 6A interoperability.
ample memory, and built-in talk set all Portable, lightweight equipment in the wiring closet. This prohibits Wiremap tests of the link with conventional DC
• 900 MHz frequency range. Prepares you problem, but also identify corrective actions
contribute to overall productivity while ergonomic design for test methods. The DTX Series CableAnalyzer has the capability to test cabling using AC signals.
for future applications, such as your test technicians can take to solve the 12-hour battery life –
enhancing the user experience. This all easy field use.
10 Gigabit Ethernet, Class F and CATV. Lithium ion battery provides full This unique feature allows full certification to ISO and TIA standards where Midspan Power
problem quickly – all without having to
adds up to save you time and money day of testing. over Ethernet supplies are used.
consult the project manager. Instead of Rotary knob makes learning
• Advanced time-saving diagnostics. every day. easy and operation simple –
Pinpoints the location of a failure spending time executing trial and error Internal memory stores up
you always know what test Certify patch cord performance
and is the only tester that suggests cor- corrections – and re-testing to find out to 250 graphical Cat 6 test
mode is selected. Test patch cords to ensure optimal network performance with greater channel throughput and
rective action, saving trouble- results or up to 2000 reports in
text format. greater system margin. Attach the optional DTX Patch Cord Adapters (DTX-PCU6S) to the DTX
shooting time.
Complete the job 33% faster with DTX main and remote units and you’re ready to certify patch cord performance to TIA Cat 6/5e
• Complete fiber certification 12 Memory Card for instant
specifications and also ISO class D/E.
10 data hand-off – Talk feature saves time by allowing Rugged overmold bonded to
Certifies fiber to Tier 1 (Basic) and Tier 2 DTX saves 2 hours in
5.0 troubleshooting time each multiple of 128 MB stores you to communicate with your test case stands up to tough field
(Extended) specifications using DTX Fiber 8 2000 Cat 6 graphical link test Test coaxial cable quickly and easily
partner at the other end of the link conditions.
Hours
Modules and the DTX Compact OTDR. 6 3.0 results. over both copper and fiber. Extend the capabilities of your DTX CableAnalyzer to test coaxial cabling systems including
• 12-hour battery life. Gives you the 3.5 legacy data cabling (such as 10BASE-2 or 10BASE-5 Ethernet) and video distribution coaxial
4
power to complete any job. 3.5 cabling. Test coax cable length, propagation delay, cable (input) impedance and insertion loss
2 3.0
DTX is
3x faster
1.0 as a function of signal frequency.
• Save time managing results. 0
Today’s Testers DTX
From setup to reporting, LinkWare™ Cable
Total Time To Certify 300 Links
Test Management Software‘s user inter-
Troubleshoot Move Test
face and time-saving features increase
DTX-1800 with DTX 10 Gig Kit to test
productivity. Alien Crosstalk performance
4. The DTX advantage: Enhance the power of DTX.
speed, performance and accuracy.
Significantly reduces total time to certify. The DTX CableAnalyzer:
Test and certify 10 Gig Ethernet over copper
The DTX CableAnalyzer’s powerful The DTX Digital CableAnalyzer Series gives a visionary approach to testing. The DTX 10 Gig over Copper Test Solution enables testing and certification of twisted pair
features, speed, and revolutionary you a complete solution that streamlines
cabling for 10 Gigabit Ethernet deployments – whether it is a Cat 6 or Augmented Cat 6
platform make you more efficient and pro- every aspect of the certification job –
cabling system. The DTX-10GKIT, together with DTX-1800 CableAnalyzer, is the first field test
ductive – and you can see the results on from setup, to record-fast testing and
solution that measures performance for 10 Gig and Alien Crosstalk (ANEXT and AFEXT) in full
the bottom line. It’s all troubleshooting, to reporting results
compliance with the industry standards to 500 MHz.
about time – and no other tester to the customer. All told, DTX can save
Level IV Accuracy – Bandwidth support to
delivers like DTX. you considerable time and money – Exceeds spec requirements for 900 MHz – supports video
Test and certify 10 Meg to 10 Gig Ethernet over fiber
up to four hours a day. Cat 6 and beyond. distribution, Class F, and
• Increase productivity from day one. With optional on-board fiber modules and the DTX Compact OTDR, complete fiber certifica-
10 Gigabit Ethernet.
Intuitive interface means your techs Cat 6 certification in Fiber ready at all times – tion is ready whenever you need it. Our certification solution includes loss length, polarity
spend less time in training and more 9 seconds optional fiber loss/length test 9-second Cat 6 Autotest – measurements and fiber traces. You can validate fiber link performance and installation quality
time testing. The DTX-1200 and DTX-1800 perform Cat 6 whether the problem has been resolved – modules and Compact OTDR speeds you through testing as well as locate sources of loss and reflectance. Measure optical loss at multiple wavelengths
the technician knows exactly where to look module fit snug and protected three times faster than any
certification tests in just 9 seconds – without swapping near and far-end units. Perform a single-end OTDR test to identify latent
• Certify 10 Gig Performance. in DTX module cavity. other tester.
in full compliance with industry standards and what to do to fix the failing link. Even problems in a fiber link. The only cable tester that lets you switch between copper and fiber
The DTX-1800 with DTX 10 Gig Kit
and with superior accuracy. That’s several if only two percent of the cables certified Large color display with with the touch of a button or perform a comprehensive suite of tests from one platform.
measures the performance for 10 Gigabit
times faster than existing testers. This in one shift fail Autotest, you’ll save as bright backlight for easy
Ethernet and Alien Crosstalk (ANEXT and
much as two hours of labor time per day viewing.
AFEXT) in full compliance with industry
incredible speed means you can test up Verify network service availability
to 170 more links in an eight-hour shift. of certifying. Improve the services you offer your customers with the DTX CableAnalyzer and Network Service
standards to 500 MHz. Advanced time-saving 12-second fiber Autotest –
diagnostics pinpoint performs dual fiber, dual- Module (DTX-NSM). Simply plug the DTX-NSM module into the back of the main unit and you’re
• Zero to certified in 9 seconds. Troubleshoot faults Fast even when you’re problems anywhere on the link wavelength certification test. ready to verify network service availability and link connectivity up to 1 Gigabit Ethernet.
This unheard-of Cat 6 test speed lets you twice as fast not testing and suggest corrective action Verify if a link is active, identify its data rate, duplex capabilities and whether power is avail-
move from link to link three times faster When a link fails, the DTX Series provides Save full graphical test
The DTX Series isn’t just a faster way to to help you get the job done able for PoE. Then document all the network connectivity tests executed as an integrated part
quick, easy-to-understand directions to results to Fluke Networks‘
than with previous testers. test. It cuts setup and reporting times. Its on time.
LinkWare PC software. of the cable certification documentation provided by LinkWare.
identify the point of failure (distance from
• Level IV Accuracy. Get the most ease-of-use lowers training time. Extended
the tester) and the possible reason(s) for Field tough Permanent Link
accurate test results in the shortest pos- battery life means you can do more on a USB Port for high-speed
Adapter delivers repeatable Test cabling with Midspan PSEs for POE applications
the failure. test data downloads.
sible time. single charge. And a bright color display, accuracy and Cat 5e, Cat 6 and Midspan power sources block DC power from traveling to the Ethernet switch or other active
These directions not only tell you the Cat 6A interoperability.
ample memory, and built-in talk set all Portable, lightweight equipment in the wiring closet. This prohibits Wiremap tests of the link with conventional DC
• 900 MHz frequency range. Prepares you problem, but also identify corrective actions
contribute to overall productivity while ergonomic design for test methods. The DTX Series CableAnalyzer has the capability to test cabling using AC signals.
for future applications, such as your test technicians can take to solve the 12-hour battery life –
enhancing the user experience. This all easy field use.
10 Gigabit Ethernet, Class F and CATV. Lithium ion battery provides full This unique feature allows full certification to ISO and TIA standards where Midspan Power
problem quickly – all without having to
adds up to save you time and money day of testing. over Ethernet supplies are used.
consult the project manager. Instead of Rotary knob makes learning
• Advanced time-saving diagnostics. every day. easy and operation simple –
Pinpoints the location of a failure spending time executing trial and error Internal memory stores up
you always know what test Certify patch cord performance
and is the only tester that suggests cor- corrections – and re-testing to find out to 250 graphical Cat 6 test
mode is selected. Test patch cords to ensure optimal network performance with greater channel throughput and
rective action, saving trouble- results or up to 2000 reports in
text format. greater system margin. Attach the optional DTX Patch Cord Adapters (DTX-PCU6S) to the DTX
shooting time.
Complete the job 33% faster with DTX main and remote units and you’re ready to certify patch cord performance to TIA Cat 6/5e
• Complete fiber certification 12 Memory Card for instant
specifications and also ISO class D/E.
10 data hand-off – Talk feature saves time by allowing Rugged overmold bonded to
Certifies fiber to Tier 1 (Basic) and Tier 2 DTX saves 2 hours in
5.0 troubleshooting time each multiple of 128 MB stores you to communicate with your test case stands up to tough field
(Extended) specifications using DTX Fiber 8 2000 Cat 6 graphical link test Test coaxial cable quickly and easily
partner at the other end of the link conditions.
Hours
Modules and the DTX Compact OTDR. 6 3.0 results. over both copper and fiber. Extend the capabilities of your DTX CableAnalyzer to test coaxial cabling systems including
• 12-hour battery life. Gives you the 3.5 legacy data cabling (such as 10BASE-2 or 10BASE-5 Ethernet) and video distribution coaxial
4
power to complete any job. 3.5 cabling. Test coax cable length, propagation delay, cable (input) impedance and insertion loss
2 3.0
DTX is
3x faster
1.0 as a function of signal frequency.
• Save time managing results. 0
Today’s Testers DTX
From setup to reporting, LinkWare™ Cable
Total Time To Certify 300 Links
Test Management Software‘s user inter-
Troubleshoot Move Test
face and time-saving features increase
DTX-1800 with DTX 10 Gig Kit to test
productivity. Alien Crosstalk performance