Detail design of geothermal power plants
•Download as PPTX, PDF•
0 likes•51 views
This document compares the land usage in square meters per gigawatt hour (m2/GWh) of electricity generated for different power plant types. A 110 megawatt geothermal flash plant uses the least amount of land at 160 m2/GWh, while a 95 megawatt hydroelectric plant requiring a reservoir uses the most land at 250,000 m2/GWh. Nuclear, coal, wind, and solar photovoltaic plants require between 1200 to 7500 m2/GWh, and a 47 megawatt solar thermal plant uses 3200 m2/GWh of land.
Report
Share
Report
Share
Recommended
Geothermal power plants
Geothermal power plants harness heat from the Earth's core to generate electricity. There are three main types - dry steam, flash steam, and binary cycle plants. Dry steam plants extract steam directly from reservoirs over 175C, while flash plants produce steam from hot water above 150C that flashes upon reaching the surface. Binary plants use lower-temperature water above 100C to boil a secondary fluid and drive turbines. Geothermal energy has significant advantages as it produces little emissions or pollution and requires less land than other energy sources. Further development could access immense heat resources and allow a large-scale, environmentally friendly renewable energy option.
Solar Thermal Power
Solar thermal power generation systems use mirrors to collect sunlight and produce steam by solar heat to drive turbines for generating power. This system generates power by rotating turbines like thermal and nuclear power plants, and therefore, is suitable for large-scale power generation.
World's largest solar thermal power plants
As unlimited resources, sunlight can be a key to overcoming climate change. The sun irradiance onto Earth is adequate to provide the world energy needs for an entire year. Despite its abundant potential, the solar energy only provides less than one-tenth of one percent of global energy use. This untapped potential will bring an enormous impact both on the environment and the economy if used effectively.
The solar energy can be harvested with photovoltaic technology and solar thermal energy technology. The concentrated solar power (CSP) has been mainly used in the solar thermal energy technology. The concentrated solar power (CSP) types that have been used in the power plant projects around the world are the parabolic trough, solar power tower, Fresnel reflectors, and dish Stirling. This paper will explore some of the largest CSP plants in the world.
Keyword: solar thermal energy, concentrated solar power, parabolic trough, solar power tower, Fresnel reflectors, dish Stirling.
Solar thermal power plant
Solar thermal power plants use a solar tower concept with an array of heliostats that reflect sunlight towards a central receiver mounted at a height of 500 meters. The plant has two fields of mirrors on either side of the receiver that are individually controlled. Mirrors are initially calibrated using cameras in the solar fields and then controlled to track the sun's movement to reflect radiation onto the receiver. This heats water in the receiver to produce steam, which is used to power turbines connected to generators to produce electricity. The steam is then condensed and recycled to the receiver to repeat the process.
geothermal energy
Geothermal energy harnesses the natural heat from within the Earth as a renewable energy source. It can generate electricity 24/7 year-round with minimal environmental impacts. Geothermal reservoirs reach temperatures over 700°F and are found at locations with geysers, hot springs, volcanoes, and boiling mud pots. 24 countries currently use geothermal energy, with the first commercial plant opening in Italy in 1911. Direct uses of geothermal heat include heating buildings and greenhouses. While installation costs are high, geothermal electricity production has low operating costs and becomes very cost competitive over time.
Fwd: geothermal --first set of slides
Geothermal energy harnesses heat from within the Earth. Heat flows from the Earth's core through the mantle and crust due to radioactive decay and plate tectonics. This heat can be accessed through volcanic activity, hydrothermal systems, or hot dry rock reservoirs deep underground. There are several technologies to utilize geothermal energy including dry steam power plants, flash steam plants, binary cycle plants, and hot dry rock systems. Site selection considers factors like heat flow, reservoir temperature and permeability. Geothermal energy has significant untapped potential globally and can provide baseload renewable energy.
geothermal energy
Geothermal energy harnesses heat from within the Earth to generate electricity and provide direct heating. It comes from radioactive decay and residual heat from the Earth's formation. Geothermal power plants tap into underground reservoirs of hot water or steam through wells to power turbines that generate electricity. Direct uses include heating buildings and greenhouses. While the technology has low emissions and land use, high upfront costs, locating suitable sites, and possible induced seismicity pose challenges to wider adoption of geothermal energy.
Solar tower
Solar towers generate electricity from sunlight by using an array of mirrors called heliostats to concentrate solar radiation onto a receiver at the top of a tower. There are two main types of solar towers: steam-based systems that use water as a heat transfer medium, and molten salt-based systems that use a molten salt mixture. Molten salt systems can store heat for hours after sunset, allowing electricity generation to continue. India is well-suited for solar towers due to its location along the Tropic of Cancer and availability of land, sunlight, and raw materials. A proposed molten salt solar tower in Gujarat could harness the region's abundant solar energy.
Recommended
Geothermal power plants
Geothermal power plants harness heat from the Earth's core to generate electricity. There are three main types - dry steam, flash steam, and binary cycle plants. Dry steam plants extract steam directly from reservoirs over 175C, while flash plants produce steam from hot water above 150C that flashes upon reaching the surface. Binary plants use lower-temperature water above 100C to boil a secondary fluid and drive turbines. Geothermal energy has significant advantages as it produces little emissions or pollution and requires less land than other energy sources. Further development could access immense heat resources and allow a large-scale, environmentally friendly renewable energy option.
Solar Thermal Power
Solar thermal power generation systems use mirrors to collect sunlight and produce steam by solar heat to drive turbines for generating power. This system generates power by rotating turbines like thermal and nuclear power plants, and therefore, is suitable for large-scale power generation.
World's largest solar thermal power plants
As unlimited resources, sunlight can be a key to overcoming climate change. The sun irradiance onto Earth is adequate to provide the world energy needs for an entire year. Despite its abundant potential, the solar energy only provides less than one-tenth of one percent of global energy use. This untapped potential will bring an enormous impact both on the environment and the economy if used effectively.
The solar energy can be harvested with photovoltaic technology and solar thermal energy technology. The concentrated solar power (CSP) has been mainly used in the solar thermal energy technology. The concentrated solar power (CSP) types that have been used in the power plant projects around the world are the parabolic trough, solar power tower, Fresnel reflectors, and dish Stirling. This paper will explore some of the largest CSP plants in the world.
Keyword: solar thermal energy, concentrated solar power, parabolic trough, solar power tower, Fresnel reflectors, dish Stirling.
Solar thermal power plant
Solar thermal power plants use a solar tower concept with an array of heliostats that reflect sunlight towards a central receiver mounted at a height of 500 meters. The plant has two fields of mirrors on either side of the receiver that are individually controlled. Mirrors are initially calibrated using cameras in the solar fields and then controlled to track the sun's movement to reflect radiation onto the receiver. This heats water in the receiver to produce steam, which is used to power turbines connected to generators to produce electricity. The steam is then condensed and recycled to the receiver to repeat the process.
geothermal energy
Geothermal energy harnesses the natural heat from within the Earth as a renewable energy source. It can generate electricity 24/7 year-round with minimal environmental impacts. Geothermal reservoirs reach temperatures over 700°F and are found at locations with geysers, hot springs, volcanoes, and boiling mud pots. 24 countries currently use geothermal energy, with the first commercial plant opening in Italy in 1911. Direct uses of geothermal heat include heating buildings and greenhouses. While installation costs are high, geothermal electricity production has low operating costs and becomes very cost competitive over time.
Fwd: geothermal --first set of slides
Geothermal energy harnesses heat from within the Earth. Heat flows from the Earth's core through the mantle and crust due to radioactive decay and plate tectonics. This heat can be accessed through volcanic activity, hydrothermal systems, or hot dry rock reservoirs deep underground. There are several technologies to utilize geothermal energy including dry steam power plants, flash steam plants, binary cycle plants, and hot dry rock systems. Site selection considers factors like heat flow, reservoir temperature and permeability. Geothermal energy has significant untapped potential globally and can provide baseload renewable energy.
geothermal energy
Geothermal energy harnesses heat from within the Earth to generate electricity and provide direct heating. It comes from radioactive decay and residual heat from the Earth's formation. Geothermal power plants tap into underground reservoirs of hot water or steam through wells to power turbines that generate electricity. Direct uses include heating buildings and greenhouses. While the technology has low emissions and land use, high upfront costs, locating suitable sites, and possible induced seismicity pose challenges to wider adoption of geothermal energy.
Solar tower
Solar towers generate electricity from sunlight by using an array of mirrors called heliostats to concentrate solar radiation onto a receiver at the top of a tower. There are two main types of solar towers: steam-based systems that use water as a heat transfer medium, and molten salt-based systems that use a molten salt mixture. Molten salt systems can store heat for hours after sunset, allowing electricity generation to continue. India is well-suited for solar towers due to its location along the Tropic of Cancer and availability of land, sunlight, and raw materials. A proposed molten salt solar tower in Gujarat could harness the region's abundant solar energy.
Concentrated solar power in India - an evaluation
Work done as a part of internship with Energy Alternatives India. A researched insight into India as an investment site for concentrated solar power generation. Technology explained along with pros, cons, and market conditions.
Conservation.1ppt
This document discusses power generation from solar thermal plants. It describes how solar thermal energy collectors are classified as low, medium, or high temperature based on their use. Low temperature collectors are used to heat pools, medium for water and air heating, and high temperature concentrate sunlight for electricity production. Heat is collected, stored, and transferred for power generation during the day and at night. Conversion rates from solar to electrical energy are highest for dish/Stirling systems at 31.25% and around 20% for trough and Fresnel systems. Applications include residential and commercial water and space heating.
concentrated solar powerplant
this is a presentation in my college .csp is a technology which is completely a out standing in the field of electricity power generation
Geothermal energy
Geothermal energy harnesses heat from underground to generate steam and produce electricity. It comes from molten rock called magma located deep below the Earth's surface. There are three main types of geothermal power plants - dry steam, flash steam, and binary cycle - that convert the heat energy into electricity. Geothermal energy is a renewable resource that produces no emissions, reduces dependence on fossil fuels, and can help communities save money on energy costs.
Solar thermal power amp
about development of renewable solar technologies,types of solar power plants and their history, new technologies, advantages and disadvantages.need of solar power
Geothermal energy
Geothermal energy comes from heat within the Earth from radioactive decay and leftover heat from the Earth's formation. There are different sources of geothermal energy such as hot water reservoirs, natural steam reservoirs, and geopressured reservoirs. Electricity can be generated directly from geothermal sources above 150°C through different plant designs like flash steam and binary cycle plants. While geothermal energy has environmental benefits with less emissions than fossil fuels, development can cause issues like brine pollution, subsidence, and seismic activity if water is not properly reinjected.
Geothermal energy presentation
Geothermal energy is heat energy stored in the Earth that is generated by radioactive decay, residual heat from the Earth's formation, and meteorite impacts. There are three main types of geothermal resources - natural steam reservoirs, geo-pressured reservoirs, and hot water reservoirs. Geothermal systems work by sending water down wells to be heated by the Earth's warmth, then using a heat pump to transfer that heat for uses like space heating before injecting the cooled water back underground. Geothermal energy has many applications and advantages like being a sustainable, homegrown, and low emissions energy source, but it can cause land subsidence if not managed properly and release hazardous gases. India has geothermal potential from its
Geo 1[1]
Geothermal energy harnesses heat from within the Earth. Heat flows from the Earth's core through the mantle and crust due to radioactive decay and plate tectonics. This heat can be accessed through volcanic activity, hydrothermal systems, or hot dry rock formations deep underground. There are several technologies to utilize geothermal energy including dry steam power plants, flash steam plants, binary cycle plants, and hot dry rock systems which pump water through fractured hot rock to generate steam. Site selection considers factors like heat flow, reservoir temperature and permeability. Geothermal energy has significant untapped potential around the world, especially along tectonic plate boundaries, and can provide baseload renewable energy with minimal emissions.
Solar demo plant
The document summarizes a solar thermal demo plant in India that uses parabolic troughs to generate 500 kW of total capacity, with 150 kW of power generation and 400 kW of thermal power. The demo plant utilizes approximately 2,000 square meters of reflective surface on 2 acres of land in Penukonda, Andhra Pradesh. It generates 150 kW of power for in-house consumption and utilizes 400 kW of thermal power for on-site operations like powder coating, pre-treatment solutions, and drying.
NMRESGI_Concentrating Solar Power and Thermal Energy Storage_Ho
NMRESGI_Concentrating Solar Power and Thermal Energy Storage_HoSandia National Laboratories: Energy & Climate: Renewables
Presentation from the New Mexico Regional Energy Storage & Grid Integration Workshop: Concentrating Solar Power and Thermal Energy Storage, presented by Clifford Ho, Sandia National Laboratories, August 23-24, 2016.Geothermal energy
School project on sustainable development for the bilingual section of Technology at the IES Praia Barraña school in Boiro, Galicia, Spain. March, 2016.
Geothermal Energy-Indirect Uses
A presentation about the indirect uses of Geothermal Energy and the different types of Geothermal Power Plants
Geothermal power plant
This document discusses geothermal energy, including its origins within the Earth's crust, different types of geothermal power plants, and applications. It provides an overview of the history of geothermal energy development, from its first use in hot springs to the establishment of geothermal power plants. Both advantages like being renewable and disadvantages like high installation costs are outlined. Worldwide and Indian geothermal energy production statistics and future targets are also presented. The conclusion states that further development of technology to utilize magma and hot dry rock could allow geothermal energy to provide unlimited and cheap energy on a large scale.
Nuclear
Nuclear power plants use nuclear fission reactions to generate heat and produce steam to power turbines that generate electricity. Nuclear fuel such as uranium-235 is used in the nuclear reactor's core to initiate and sustain a controlled nuclear chain reaction. Control rods are used to regulate the chain reaction. Steam generated in steam generators is used to power the turbines, which turn generators to produce electricity. The steam is then cooled and recycled through the system. Nuclear power produces low carbon emissions but generates radioactive waste that remains hazardous for thousands of years.
geothermal energy
presentation on geothermal energy and how it is extracted from the earths core which is helpful in future....
To fifteen kilometers below the surface of the
Geothermal energy harnesses the nearly limitless heat below the Earth's surface, which can reach over 420 degrees Celsius. It is generated from the natural heat within the Earth from radioactive decay and molten rock. Geothermal energy can be used to directly heat structures, heat homes, power absorption refrigerators, and generate electricity by turning turbines with steam produced from underground reservoirs. While it provides a constant, renewable source of energy with low emissions, disadvantages include hazardous gases in some areas and inability to transport the energy over long distances.
Let's make a Geothermal Power Plant
This document provides information about geothermal power generation. It discusses geothermal energy resources, the different methods of geothermal power generation including dry steam, flash steam and binary cycle power stations. It notes that worldwide geothermal power capacity is currently 12.8 GW generated in 24 countries. The document also discusses investment costs, maintenance costs, efficiency and the potential for hybridizing geothermal plants with other renewable resources. It concludes that while initial costs are high, maintenance costs are very low, efficiency can be increased through hybridization, and geothermal power generation is largely pollution-free.
Geothermal power - financial comparison
Looking at the investment per effective MW, geothermal energy is a very attractive investment.
In terms of investment per MW-peak, geothermal energy seems not to be especially attractive. However, utilization must also be considered. Taking utilization into account, geothermal energy is a very attractive investment.
Finally, the period after economic life makes geothermal energy really attractive.
Soalr stirling engine
The document discusses solar Stirling power technology. A solar Stirling engine uses concentrated sunlight as a heat source to more efficiently generate electricity than solar panels. It consists of a closed cylinder containing gas that is heated at one end by sunlight and cooled at the other. As the gas expands and contracts, a generator is driven to produce electricity. The engine has a simple design with few moving parts, is efficient, clean, and silent. It can run on various heat sources and has low maintenance costs, though initial costs are high and it faces challenges with sealing and heat losses. The technology has scope for large-scale power production to address energy crises given that sunlight is a renewable source.
solar power plant
Solar power plants harness energy from the sun and convert it to electricity through one of two processes: photovoltaic cells that directly convert sunlight to electricity, or solar-thermal systems that use mirrors to heat a liquid and create steam to power turbines. The Philippines has good solar resources, especially in the sunbelt between 20 degrees north and south of the equator. While initial costs of solar power plants can be high, maintenance costs are low and they produce no air or water pollution or greenhouse gases during operation. Some impacts include resource use and pollution during manufacturing and potential effects on local ecosystems.
Peb802 capstone design project assesment 2
This document summarizes the results of several soil tests conducted as part of a capstone design project. The tests included sieve analysis, moisture content determination, density tests using a core cutter method, liquid limit tests, and compaction tests. For each test, the materials and methods are described and test results including weights, densities, moisture contents and other measured values are reported. The overall goal of the project was to minimize soil stabilization costs using various additives like coir fiber, KOBM, and geotextiles.
2016133741 peb 802 capstone design project ii progress assessment 1
This document summarizes a capstone design project that aims to stabilize red clay soil using coir fiber, KOBM, and geotextile materials. The objectives are to assess subgrade materials, investigate the strength of unreinforced red clay soil, enhance soil strength with stabilizing materials, enhance strength with geotextile reinforcement, and observe loading resistance with different fiber contents and stabilization ratios. A literature review is presented on previous research regarding soil stabilization with coir fiber. The document outlines the necessary experimental tests to be conducted, including Atterberg limits testing, compaction testing, CBR testing, and unconfined compression testing. The experiments will help determine the optimal fiber content to improve soil strength at minimum cost
More Related Content
What's hot
Concentrated solar power in India - an evaluation
Work done as a part of internship with Energy Alternatives India. A researched insight into India as an investment site for concentrated solar power generation. Technology explained along with pros, cons, and market conditions.
Conservation.1ppt
This document discusses power generation from solar thermal plants. It describes how solar thermal energy collectors are classified as low, medium, or high temperature based on their use. Low temperature collectors are used to heat pools, medium for water and air heating, and high temperature concentrate sunlight for electricity production. Heat is collected, stored, and transferred for power generation during the day and at night. Conversion rates from solar to electrical energy are highest for dish/Stirling systems at 31.25% and around 20% for trough and Fresnel systems. Applications include residential and commercial water and space heating.
concentrated solar powerplant
this is a presentation in my college .csp is a technology which is completely a out standing in the field of electricity power generation
Geothermal energy
Geothermal energy harnesses heat from underground to generate steam and produce electricity. It comes from molten rock called magma located deep below the Earth's surface. There are three main types of geothermal power plants - dry steam, flash steam, and binary cycle - that convert the heat energy into electricity. Geothermal energy is a renewable resource that produces no emissions, reduces dependence on fossil fuels, and can help communities save money on energy costs.
Solar thermal power amp
about development of renewable solar technologies,types of solar power plants and their history, new technologies, advantages and disadvantages.need of solar power
Geothermal energy
Geothermal energy comes from heat within the Earth from radioactive decay and leftover heat from the Earth's formation. There are different sources of geothermal energy such as hot water reservoirs, natural steam reservoirs, and geopressured reservoirs. Electricity can be generated directly from geothermal sources above 150°C through different plant designs like flash steam and binary cycle plants. While geothermal energy has environmental benefits with less emissions than fossil fuels, development can cause issues like brine pollution, subsidence, and seismic activity if water is not properly reinjected.
Geothermal energy presentation
Geothermal energy is heat energy stored in the Earth that is generated by radioactive decay, residual heat from the Earth's formation, and meteorite impacts. There are three main types of geothermal resources - natural steam reservoirs, geo-pressured reservoirs, and hot water reservoirs. Geothermal systems work by sending water down wells to be heated by the Earth's warmth, then using a heat pump to transfer that heat for uses like space heating before injecting the cooled water back underground. Geothermal energy has many applications and advantages like being a sustainable, homegrown, and low emissions energy source, but it can cause land subsidence if not managed properly and release hazardous gases. India has geothermal potential from its
Geo 1[1]
Geothermal energy harnesses heat from within the Earth. Heat flows from the Earth's core through the mantle and crust due to radioactive decay and plate tectonics. This heat can be accessed through volcanic activity, hydrothermal systems, or hot dry rock formations deep underground. There are several technologies to utilize geothermal energy including dry steam power plants, flash steam plants, binary cycle plants, and hot dry rock systems which pump water through fractured hot rock to generate steam. Site selection considers factors like heat flow, reservoir temperature and permeability. Geothermal energy has significant untapped potential around the world, especially along tectonic plate boundaries, and can provide baseload renewable energy with minimal emissions.
Solar demo plant
The document summarizes a solar thermal demo plant in India that uses parabolic troughs to generate 500 kW of total capacity, with 150 kW of power generation and 400 kW of thermal power. The demo plant utilizes approximately 2,000 square meters of reflective surface on 2 acres of land in Penukonda, Andhra Pradesh. It generates 150 kW of power for in-house consumption and utilizes 400 kW of thermal power for on-site operations like powder coating, pre-treatment solutions, and drying.
NMRESGI_Concentrating Solar Power and Thermal Energy Storage_Ho
NMRESGI_Concentrating Solar Power and Thermal Energy Storage_HoSandia National Laboratories: Energy & Climate: Renewables
Presentation from the New Mexico Regional Energy Storage & Grid Integration Workshop: Concentrating Solar Power and Thermal Energy Storage, presented by Clifford Ho, Sandia National Laboratories, August 23-24, 2016.Geothermal energy
School project on sustainable development for the bilingual section of Technology at the IES Praia Barraña school in Boiro, Galicia, Spain. March, 2016.
Geothermal Energy-Indirect Uses
A presentation about the indirect uses of Geothermal Energy and the different types of Geothermal Power Plants
Geothermal power plant
This document discusses geothermal energy, including its origins within the Earth's crust, different types of geothermal power plants, and applications. It provides an overview of the history of geothermal energy development, from its first use in hot springs to the establishment of geothermal power plants. Both advantages like being renewable and disadvantages like high installation costs are outlined. Worldwide and Indian geothermal energy production statistics and future targets are also presented. The conclusion states that further development of technology to utilize magma and hot dry rock could allow geothermal energy to provide unlimited and cheap energy on a large scale.
Nuclear
Nuclear power plants use nuclear fission reactions to generate heat and produce steam to power turbines that generate electricity. Nuclear fuel such as uranium-235 is used in the nuclear reactor's core to initiate and sustain a controlled nuclear chain reaction. Control rods are used to regulate the chain reaction. Steam generated in steam generators is used to power the turbines, which turn generators to produce electricity. The steam is then cooled and recycled through the system. Nuclear power produces low carbon emissions but generates radioactive waste that remains hazardous for thousands of years.
geothermal energy
presentation on geothermal energy and how it is extracted from the earths core which is helpful in future....
To fifteen kilometers below the surface of the
Geothermal energy harnesses the nearly limitless heat below the Earth's surface, which can reach over 420 degrees Celsius. It is generated from the natural heat within the Earth from radioactive decay and molten rock. Geothermal energy can be used to directly heat structures, heat homes, power absorption refrigerators, and generate electricity by turning turbines with steam produced from underground reservoirs. While it provides a constant, renewable source of energy with low emissions, disadvantages include hazardous gases in some areas and inability to transport the energy over long distances.
Let's make a Geothermal Power Plant
This document provides information about geothermal power generation. It discusses geothermal energy resources, the different methods of geothermal power generation including dry steam, flash steam and binary cycle power stations. It notes that worldwide geothermal power capacity is currently 12.8 GW generated in 24 countries. The document also discusses investment costs, maintenance costs, efficiency and the potential for hybridizing geothermal plants with other renewable resources. It concludes that while initial costs are high, maintenance costs are very low, efficiency can be increased through hybridization, and geothermal power generation is largely pollution-free.
Geothermal power - financial comparison
Looking at the investment per effective MW, geothermal energy is a very attractive investment.
In terms of investment per MW-peak, geothermal energy seems not to be especially attractive. However, utilization must also be considered. Taking utilization into account, geothermal energy is a very attractive investment.
Finally, the period after economic life makes geothermal energy really attractive.
Soalr stirling engine
The document discusses solar Stirling power technology. A solar Stirling engine uses concentrated sunlight as a heat source to more efficiently generate electricity than solar panels. It consists of a closed cylinder containing gas that is heated at one end by sunlight and cooled at the other. As the gas expands and contracts, a generator is driven to produce electricity. The engine has a simple design with few moving parts, is efficient, clean, and silent. It can run on various heat sources and has low maintenance costs, though initial costs are high and it faces challenges with sealing and heat losses. The technology has scope for large-scale power production to address energy crises given that sunlight is a renewable source.
solar power plant
Solar power plants harness energy from the sun and convert it to electricity through one of two processes: photovoltaic cells that directly convert sunlight to electricity, or solar-thermal systems that use mirrors to heat a liquid and create steam to power turbines. The Philippines has good solar resources, especially in the sunbelt between 20 degrees north and south of the equator. While initial costs of solar power plants can be high, maintenance costs are low and they produce no air or water pollution or greenhouse gases during operation. Some impacts include resource use and pollution during manufacturing and potential effects on local ecosystems.
What's hot (20)
NMRESGI_Concentrating Solar Power and Thermal Energy Storage_Ho
NMRESGI_Concentrating Solar Power and Thermal Energy Storage_Ho
More from vishwaleenram
Peb802 capstone design project assesment 2
This document summarizes the results of several soil tests conducted as part of a capstone design project. The tests included sieve analysis, moisture content determination, density tests using a core cutter method, liquid limit tests, and compaction tests. For each test, the materials and methods are described and test results including weights, densities, moisture contents and other measured values are reported. The overall goal of the project was to minimize soil stabilization costs using various additives like coir fiber, KOBM, and geotextiles.
2016133741 peb 802 capstone design project ii progress assessment 1
This document summarizes a capstone design project that aims to stabilize red clay soil using coir fiber, KOBM, and geotextile materials. The objectives are to assess subgrade materials, investigate the strength of unreinforced red clay soil, enhance soil strength with stabilizing materials, enhance strength with geotextile reinforcement, and observe loading resistance with different fiber contents and stabilization ratios. A literature review is presented on previous research regarding soil stabilization with coir fiber. The document outlines the necessary experimental tests to be conducted, including Atterberg limits testing, compaction testing, CBR testing, and unconfined compression testing. The experiments will help determine the optimal fiber content to improve soil strength at minimum cost
2016133741 vishwaleen peb 801 capstone design project mid-year report
This mid-year progress report summarizes work on a capstone design project investigating sustainable soil stabilization using natural fibers and waste materials. The project aims to study how soil strength is affected by stabilization methods and materials like fiber reinforcement. Literature on reinforcing soil with fibers such as bamboo, jute, sisal, coir, and human hair was reviewed. Experiments conducted included triaxial tests, sieve analysis tests, plate bearing tests, Atterberg limit tests, and shear strength tests. Future work includes completing modeling and analysis using geostudio software, developing outreach posters, and presenting project findings. The outputs will evaluate designs for sustainable and cost-effective soil stabilization.
A poster peb capstone design project
This document discusses testing methods for stabilizing soil using natural fibers and waste materials in a sustainable way. It proposes several laboratory tests to analyze the effects of different fiber types on soil properties, including shear strength testing, unconfined compression testing, saturated testing, and bearing capacity testing. The goal is to develop a soil stabilization method that is locally available, environmentally friendly, cost effective, and makes use of waste materials. The document outlines a methodology using coir fiber to reinforce soil samples in a laboratory study, which will evaluate stabilized soil properties at different fiber reinforcement percentages.
Soil stabilization using natural fibers and waste materials
This document summarizes a student's research project on soil stabilization using natural fibers and waste materials. The objectives are to explore sustainable soil stabilization methods and to increase the shear and bearing strength of clayey soil using human hair fiber. The methodology involves laboratory testing of reinforced soil samples and computer modeling/analysis using GeoStudio software. A literature review covers previous research on reinforcing soil with various natural fibers like bamboo, jute, coconut and waste materials. The engineering design process includes soil characterization, fiber strength testing, and comparing geotechnical test results of reinforced versus non-reinforced soil.
Basic appoarch to urban drainage runoff quantity and quality
This document discusses approaches to urban drainage and management of runoff quantity and quality. It explains that traditional drainage methods focus on end-of-pipe solutions and canalization, which can increase surface flows and flood peaks. Sustainable drainage systems (SUDS) methods maintain natural conditions using storage and infiltration to control runoff. Common design approaches include empirical peak runoff methods, hydrologic simulation models, and the Rational Method equation. Models simulate the effects of development on stormwater systems. Managing runoff quality is also important as urbanization increases impervious surfaces and runoff into streams.
Synopsis 1capstone project
This capstone project investigates sustainable soil stabilization methods using natural fibers available in Fiji. A group of civil engineering students will conduct model tests to study the effects of coconut husk and bamboo fibers on soil strength. They will collect soil data from field sites, perform laboratory experiments, and use GeoStudio and FLAC 3D software to analyze results. The project aims to develop cost-effective alternatives to reinforcement steel for retaining walls and pavements. Expected outcomes include explaining stabilization mechanisms, validating numerical models, presenting findings, and concluding on fiber-reinforced soil performance.
Ceb 706 design of reinforeced and presressed concrete updated!
This document discusses prestressed concrete design. It begins with an introduction to prestressed concrete as a widely used structural material. It then covers:
1. The history of prestressed concrete in Fiji, including notable structures built with it such as the Reserve Bank of Fiji and bridges.
2. The advantages of prestressed concrete over reinforced concrete, such as increased strength, reduced cracking, and longer spans. It also discusses disadvantages like higher production costs.
3. A site visit and interview conducted at Humes Concrete to learn about their products, casting procedures, past projects, challenges, and future plans.
Final presentation design project 1
This document outlines a proposed design for a new 20MW geothermal power plant in Savusavu, Fiji. The plant would use a binary cycle system to harness geothermal energy from reservoirs between 70-200 degrees Celsius. The system would include production wells to extract brine, a heat exchanger to transfer heat to a working fluid, turbines turned by the heated fluid, and 80 generators each producing 250kW of power. Electricity would be transmitted through cables to consumers. The plant aims to provide clean, renewable energy to the area at a lower cost than fossil fuels.
geothermal power plant fiji
Geothermal energy is heat from within the Earth that can be used as a clean, renewable energy source. Fiji has potential locations for geothermal energy production, such as in Savusavu, where hot springs indicate geothermal resources close to the surface. Geothermal energy can be harvested by drilling wells into underground reservoirs of hot water or steam and piping it directly to power plants to run turbines and generate electricity. Developing geothermal energy could help solve Fiji's energy crisis and reduce greenhouse gas emissions compared to fossil fuel alternatives.
geothermal power plant fiji
Geothermal energy in Fiji falls between 150-200 degrees and is found primarily on the islands of Vanua Levu and Viti Levu. The geothermal areas can be used for direct heating, electricity generation, or geothermal heat pumps. Developing geothermal energy in Fiji provides clean, renewable energy and reduces reliance on fossil fuels.
More from vishwaleenram (11)
2016133741 peb 802 capstone design project ii progress assessment 1
2016133741 peb 802 capstone design project ii progress assessment 1
2016133741 vishwaleen peb 801 capstone design project mid-year report
2016133741 vishwaleen peb 801 capstone design project mid-year report
Soil stabilization using natural fibers and waste materials
Soil stabilization using natural fibers and waste materials
Basic appoarch to urban drainage runoff quantity and quality
Basic appoarch to urban drainage runoff quantity and quality
Ceb 706 design of reinforeced and presressed concrete updated!
Ceb 706 design of reinforeced and presressed concrete updated!
Recently uploaded
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaA SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Recently uploaded (20)
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Detail design of geothermal power plants
- 2. Power plant type Land usage m2 /GWh 110 MW geothermal flash plant (including wells) 160 670 MW nuclear plant (plant site only) 1200 47 MW solar thermal plant 3200 2258 MW coal plant (including strip mining) 5700 25 MW wind farm 7200 10 MW solar PV plant 7500 95 MW hydroelectric plant (reservoir only) 250000
- 3. Production Well Working fluid, Cooling fluid, Geothermal brine Evaporator Preheater Turbine Condenser Generator Injection Well