The document provides an overview of GSM basics including its history and development. It describes the key aspects of GSM including the different frequency bands (GSM 900, DCS 1800, PCS 1900), physical channels, logical channels, control channels, and traffic channels. It also outlines the main components of the GSM network including the base station system (BSS), switching system (SS), and mobile station (MS). Finally, it covers GSM identities, operations, services, and advantages.
Global system for mobile communication(GSM)Jay Nagar
~Introduction
~GSM Architecture
~GSM Entities
~SMS Service In GSM
~Call Routing In GSM
~PLMN Interfaces
~GSM Addresses and Identifiers
~Network aspects in GSM
~Handover
~Mobility Management
~GSM Frequency Allocation
~Authentication and Security In GSM
What is GSM?
The Global System for Mobile communications is a digital cellular communications system. It was developed in order to create a common European mobile telephone standard but it has been rapidly accepted worldwide.
Formerly it was “Groupe Spéciale Mobile” (founded in 1982)
now: Global System for Mobile Communication.
Services:
Tele-services
Bearer or Data Services
Supplementary services
Applications:
Mobile telephony
GSM-R
Telemetry System
- Fleet management
- Automatic meter reading
- Toll Collection
- Remote control and fault reporting of DG sets
Value Added Services
Advantages:
Better Quality of speech
Data transmission is supported
New services offered due to ISDN compatibility
International Roaming possible
Large market
Crisper, cleaner quieter calls
disadvantages:
Dropped and missed calls
Less Efficiency
Security Issues
conclusion
The mobile telephony industry rapidly growing and that has become backbone for business success and efficiency and a part of modern lifestyles all over the world.
In this session I have tried to give and over view of the GSM system. I hope that I gave the general flavor of GSM and the philosophy behind its design.
The GSM is standard that insures interoperability without stifling competition and innovation among the suppliers to the benefit of the public both in terms of cost and service quality.
Global system for mobile communication(GSM)Jay Nagar
~Introduction
~GSM Architecture
~GSM Entities
~SMS Service In GSM
~Call Routing In GSM
~PLMN Interfaces
~GSM Addresses and Identifiers
~Network aspects in GSM
~Handover
~Mobility Management
~GSM Frequency Allocation
~Authentication and Security In GSM
What is GSM?
The Global System for Mobile communications is a digital cellular communications system. It was developed in order to create a common European mobile telephone standard but it has been rapidly accepted worldwide.
Formerly it was “Groupe Spéciale Mobile” (founded in 1982)
now: Global System for Mobile Communication.
Services:
Tele-services
Bearer or Data Services
Supplementary services
Applications:
Mobile telephony
GSM-R
Telemetry System
- Fleet management
- Automatic meter reading
- Toll Collection
- Remote control and fault reporting of DG sets
Value Added Services
Advantages:
Better Quality of speech
Data transmission is supported
New services offered due to ISDN compatibility
International Roaming possible
Large market
Crisper, cleaner quieter calls
disadvantages:
Dropped and missed calls
Less Efficiency
Security Issues
conclusion
The mobile telephony industry rapidly growing and that has become backbone for business success and efficiency and a part of modern lifestyles all over the world.
In this session I have tried to give and over view of the GSM system. I hope that I gave the general flavor of GSM and the philosophy behind its design.
The GSM is standard that insures interoperability without stifling competition and innovation among the suppliers to the benefit of the public both in terms of cost and service quality.
The GSM standard was developed by the Groupe SpecialMobile, which was an initiative of the Conference of European Post and Telecommunications (CEPT) administrations.
The responsibility for GSM standardization now resides with the
Special Mobile Group (SMG) under the European Telecommunication Standard Institute (ETSI).
Fully digital system utilizing the 900MHz frequency band.
TDMA over radiocarriers(200 kHz carrier spacing)
8 full rate or 16 half rate TDMA channels per carrier
User/terminal authentication for fraud control
Encryption of speech and data transmissions over the radio path
Full international roaming capability
Low speed data services (upto 9.6kb/s)
Compatibility with ISDN for supplementary services
Support of short message services(SMS)
GSM supports a range of basic and supplementary services, and these services are defined analogous to those for ISDN(i.e.,bearer services, teleservices, and supplementary services).
The most important service supported by GSM is Telephony.
Other services derived from telephony included in the GSM specification are emergency calling and voice messaging.
Bearer services supported in GSM include various asynchronous and synchronous data services for information transfer.
Teleservices based on these bearer services include group 3 fax and short message service(SMS)
The data capabilities of GSM have now been enhanced to include high speed circiut-switched data(HSCSD) and general packet radio service (GPRS).
Call offering services call forwarding
Call resrtiction services call barring
Call waiting service
Call hold service
Multi party service tele conferencing
Calling line presentation restriction services
Advice of charge service
Closed user group service
The GSM System comprises of Base Transceiver Station (BTS), Base Station Controllers (BSC), Mobile Switching Centers (MSC), and set of registers (databases) to assist in mobility management and security functions.
All signaling between the MSC and the various registers (databases) as well as between the MSCs takes place using the Signaling System 7(SS7) network, with the application level messages using the Mobile Application Protocol (MAP) designed specifically for GSM.
The MAP protocol utilizes the lower layer functions from the SS7 protocol stack.
• -How the channel concept is used on the radio interface
• -Different burst formats in the radio interface
• -The hierarchical frame structure
• -The content sent in different logical channels
• -The mapping of the logical channels
• -Superframe and Hyperframe
• -MOBILE STATIONS ISDN NUMBER (MSISDN)
• INTERNATIONAL MOBILE SUBSCRIBER IDENTITY (IMSI)
• TEMPORARY MOBILE SUBSCRIBER IDENTITY (TMSI)
• LOCATION AREA IDENTITY (LAI)
• CELL GLOBAL IDENTITY (CGI)
• BASE STATION IDENTITY CODE (BSIC)
• PIN management
Topics covered in this presentation:
What is a Base Transceiver Station ?
Components of any BTS
BTS transceiver, BTS O&M module, clock module
BTS Transmitter and Receiver Characteristics
BTS configurations
BTS functions and Protocols on Um and Abis Interface
BTS security aspects
Hi.....
Add 4G parameters in tems window||
https://www.youtube.com/watch?v=FmKi0O9dWpQ&t=3s
Training of 2G+3G+4G ON TEMS
https://www.youtube.com/watch?v=F2Ly5n4S8Xs
Like subscribe and share
Global System For Mobile Communication by Ummer &MaroofUmmer Rashid Dar
Global System For Mobile Communication
By: Ummer Rashid Dar & Maroof Bashir Bhat
M.tech (ECE) ,1st year .
Pounduchery University.
Dept.of Electronics Engineering .
605014
This presentation covers:
How evolution has happened from First Generation Mobile Communication Systems to present day 3G/UMTS/WCMDA systems
Brief introduction of each Generation: GSM - 2G, 2.5 G - GPRS, 2.75G - EDGE, 3G and then LTE/4G
Global system for mobile communication Introduction, GSM architecture, GSM interfaces, Signal processing in GSM,
Frame structure of GSM, Channels used in GSM
The GSM standard was developed by the Groupe SpecialMobile, which was an initiative of the Conference of European Post and Telecommunications (CEPT) administrations.
The responsibility for GSM standardization now resides with the
Special Mobile Group (SMG) under the European Telecommunication Standard Institute (ETSI).
Fully digital system utilizing the 900MHz frequency band.
TDMA over radiocarriers(200 kHz carrier spacing)
8 full rate or 16 half rate TDMA channels per carrier
User/terminal authentication for fraud control
Encryption of speech and data transmissions over the radio path
Full international roaming capability
Low speed data services (upto 9.6kb/s)
Compatibility with ISDN for supplementary services
Support of short message services(SMS)
GSM supports a range of basic and supplementary services, and these services are defined analogous to those for ISDN(i.e.,bearer services, teleservices, and supplementary services).
The most important service supported by GSM is Telephony.
Other services derived from telephony included in the GSM specification are emergency calling and voice messaging.
Bearer services supported in GSM include various asynchronous and synchronous data services for information transfer.
Teleservices based on these bearer services include group 3 fax and short message service(SMS)
The data capabilities of GSM have now been enhanced to include high speed circiut-switched data(HSCSD) and general packet radio service (GPRS).
Call offering services call forwarding
Call resrtiction services call barring
Call waiting service
Call hold service
Multi party service tele conferencing
Calling line presentation restriction services
Advice of charge service
Closed user group service
The GSM System comprises of Base Transceiver Station (BTS), Base Station Controllers (BSC), Mobile Switching Centers (MSC), and set of registers (databases) to assist in mobility management and security functions.
All signaling between the MSC and the various registers (databases) as well as between the MSCs takes place using the Signaling System 7(SS7) network, with the application level messages using the Mobile Application Protocol (MAP) designed specifically for GSM.
The MAP protocol utilizes the lower layer functions from the SS7 protocol stack.
• -How the channel concept is used on the radio interface
• -Different burst formats in the radio interface
• -The hierarchical frame structure
• -The content sent in different logical channels
• -The mapping of the logical channels
• -Superframe and Hyperframe
• -MOBILE STATIONS ISDN NUMBER (MSISDN)
• INTERNATIONAL MOBILE SUBSCRIBER IDENTITY (IMSI)
• TEMPORARY MOBILE SUBSCRIBER IDENTITY (TMSI)
• LOCATION AREA IDENTITY (LAI)
• CELL GLOBAL IDENTITY (CGI)
• BASE STATION IDENTITY CODE (BSIC)
• PIN management
Topics covered in this presentation:
What is a Base Transceiver Station ?
Components of any BTS
BTS transceiver, BTS O&M module, clock module
BTS Transmitter and Receiver Characteristics
BTS configurations
BTS functions and Protocols on Um and Abis Interface
BTS security aspects
Hi.....
Add 4G parameters in tems window||
https://www.youtube.com/watch?v=FmKi0O9dWpQ&t=3s
Training of 2G+3G+4G ON TEMS
https://www.youtube.com/watch?v=F2Ly5n4S8Xs
Like subscribe and share
Global System For Mobile Communication by Ummer &MaroofUmmer Rashid Dar
Global System For Mobile Communication
By: Ummer Rashid Dar & Maroof Bashir Bhat
M.tech (ECE) ,1st year .
Pounduchery University.
Dept.of Electronics Engineering .
605014
This presentation covers:
How evolution has happened from First Generation Mobile Communication Systems to present day 3G/UMTS/WCMDA systems
Brief introduction of each Generation: GSM - 2G, 2.5 G - GPRS, 2.75G - EDGE, 3G and then LTE/4G
Global system for mobile communication Introduction, GSM architecture, GSM interfaces, Signal processing in GSM,
Frame structure of GSM, Channels used in GSM
GSM(Global system for mobile communication ) is a second generation cellular standard developed to cater voice services and data delivery using digital modulation.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Planning Of Procurement o different goods and services
Definitions gsm
1. GSM BASICS
GSM HISTORY:
In 1982 the Nordic PTTs sent a proposal to CEPT (Conference of European Postal & telegraph
Administration) to study and to improve digital cellular technology by forming a team called Group
Special Mobile.
In 1989 GSM was moved to ETSI (European Telecommunication standards Institute) Organisation and
was abbreviated as Global system mobile communication.
There are different types in GSM.
1) GSM 900
2) DCS 1800
3) PCS 1900
GSM 900:
• GSM 900 operates at 900MHz frequency.
• Up link operates on 890MHz to 915MHz Band.
• Down link operates on 935MHz to 960MHz Band.
• Uplink /Downlink separation: 45 MHz.
• GSM takes advantages of both FDMA & TDMA.
• In 25MHz BW, 124 carriers are generated with channel spacing of
200KHz(FDMA)
• Each carrier is divided into 8 time slots (TDMA)
• At any specific time 992 speech channels are made available in GSM 900.
DCS 1800:
• DCS 1800 operates at 1800 Mhz frequency
• Up link operates on 1715MHz to 1785MHz Band.
• Down link operates on 1805MHz to 1880MHz Band.
• Uplink /Downlink separation: 95 MHz.
• Channel spacing : 200khz
• Each carrier is divided into 8 time slots (TDMA)
• No. of carrier : 374
PCS 1900:
• DCS 1900 operates at 1900 MHz frequency
• Up link operates on 1850 MHz to 1910MHz Band.
• Down link operates on 1930MHz to 1990MHz Band.
• Uplink /Downlink separation: 80 MHz.
2. GSM ADVANTAGES:
• It is a wireless system. So mobile equipment (cell phone) can be on move.
• High secrecy in the system. So information cannot be tapped easily.
• Easy to carry MS. And consumes less power.
• GSM provides more voice channels in limited bandwidth.
• Cellular is based on concept of trunking. This allows large number of
channels.
GSM CHANNELS:
1) Physical Channels:
One time slot on one carrier is called physical channel.
2) Logical Channels:
Information carried by physical channels is called logical Channels.
Logical channels are:
FCCH, SCH, BCCH, PCH, RACH, AGCH, SDCCH, SACCH, FACCH, TCH.
CONTROLS CHANNELS
Broadcast channels (CH) Traffic channels
1) BCCH (TCH)
2) FCCH Common control 1) 1/2 rate 2) Full rate
3) SCH channel (CCH)
1) RACH Associated channels (ACH)
2) AGCH 1) SACCH
3) PCH 2) FACCH
4) CBCH 3) SDCCH
3. CONTROLS CHANNELS
1) Broadcast CHannel (BCH) (downlink only)
• Broadcast Controls Channels (BCCH)
Broadcasts cell specific information to the MS.
• Frequency correction CHannel (FCCH)
Used for frequency correction of MS.
• Synchronization Channel (SCH)
Carrier information about TDMA frame number and the Base Station
Identity code (BSIC) of the BTS.
2) Common Controls CHannel (CCH)
• Random Access Channel (RACH)
Is used by the mobile when making its first access to the system. By
making that access, the MS is requesting a signalling. The reason for
the access could be a page response or initiation. RACH is sent uplink,
point to point.
• Access Grant Channel (AGCH)
It is used to assign dedicate resource to MS. It is sent downlink, point to
point and grandly access the network.
• Paging Channel (PCH)
Used on the downlink to page the MS.
• Cell Broadcast Channel (CBCH)
It is used to transmit common message to the cell MS
3) ASSOCIATED CONTROLS CHANNELS (ACCH)
• Slow Associated Controls Channel (SACCH)
It is used Measurement reports from the MS to BTS are sent on the
uplink. On the downlink the MS receives information from the BTS on
what transmitting power to use and also instruction on Timing advance
(TA).It is also used for the transmission of short text message in call
connected (busy) mode. Controls channel associated with a TCH.
• Fast Associated control Channel (FACCH)
Controls channel associated with a TCH.It is mainly used handover
information used on uplink and downlink.
• Standalone Dedicated Controls Channel (SDCCH)
Used for system signaling during call setup or registration, uplink and
downlink, as well as the transmission of short message in idle mode.
4) TRAFFIC CHANNELS (TCH)
• Half rate channels
Used for half rate speech at 6.5kbps or data up to 4.8kbps.
• Full rate channels
Used for full rate speech at 13kbps or data up to 9.6kbps.
4. CHANNEL COMBINATIONS:
The different channels mentioned above are grouped into what are called
channel combination.
The four most common type of combination are listed below:
Full rate Traffic channel combination –TCH8/FACCH
Broad channel combination – BCCH + CCCH
Dedicated channel combination – SDCCH8+SACCH8
Combined channel combination –
BCCH + CCCH + SDCCH4 + SACCH4
The channel combination pattern used us:
1. CELLS with single carrier:
Time slot 0 =BCCH+CCH+SDCCH4+SACCH4
Time slot 1-7 = TCH / FACCH + SACCH
2. CELLS with two carrier: for BCCH carrier
Time slot 0 =BCCH+CCCH
Time slot 1-7 = TCH / FACCH + SACCH
For non-BCCH carrier
time slot 0 = SDCCH8 +SACCH8
Time slots 1-7 = TCH / FACCH + SACCH
GSM NETWORK DIAGRAM:
SS AUC
PSTN
VLR
ISDN EIR OMCHLR
Others MSC
BSS
BSC
BTS
5. MS
NETWORK NODES:
1) BSS (Base Station System)
2) SS (Switching System)
3) MS (Mobile Station)
BASE STATION SYSTEM (BSS):
The base station system is divided into the following functional units:
1) BASE TRANSCEIVER STATION (BTS):
The BTS is the radio equipment needed to serve one cell. It contains the antenna
system, transmitters, receivers and digital signaling equipment.
2) BASE STATION CONTROLLER (BSC):
The BSC controls and supervises a number of BTSs and radio connection in the
system. It handles the administration of cell data, the locating algorithm and orders
handovers.
SWITCHING SYSTEM (SS)
The SS contains the following functional units:
1) MOBILE SERVICERS SWITCHING CENTER (MSC);
It is mainly performing switching function. The MSC is responsible for setting up,
routing and supervising calls to and from the mobile subscriber.
2) VISITOR LOCATION REGISTER (VLR):
The VLR is the temporarily stores information about the MS currently visiting its
service area.
3) HOME LOCATION REGISTER (HLR):
The HLR is a database for storing subscriber information specific to that
PLMN.Subscriber information includes location information and on services assigned to the
subscriber.
4) AUTHENTICATION CENTER (AUC):
6. AUC generates triplets used in the authentication of SIM card and used in the ciphering of
speech, data and signaling over the air interface.
5) EQUIPMENT IDENTITY (EIR):
The EIR is database responsible for the validation of the mobile equipment.
MOBILE STATION (MS):
The MS allows the subscriber to access the network through the radio interface.
The MS consists of:
• Mobile Equipment (ME):
The ME consists of radio processing functions and interface to the user
and to the terminal equipment.
• Subscriber Identity Module (SIM):
The SIM contains information on the user subscription and can be used
with any ME.
OPERATION AND MAINTENANCE CENTRE (OMC)
The entity can be used for supervision and control of all the other entities in the
network. Even though this part is not obligatory, it is highly needed.
PUBLIC LAND MOBILE NETWORK (PLMN)
A GSM PLMN is the complete GSM NETWORK belongs to one operator in one
country. each country can have one or several PLMN.
GATEWAY MOBILE SERVICE SWITCHING CENTRE (GMSC)
A gate between the GSM and other network is necessary. At a call
To a subscriber in the GSM network, the call will first routed to GMSC.The GMSC is
responsible for finding out in what part of the GSM network the questioning HLR and also
for routing the call there.
SUBSCRIBER IDENTITY MODULE (SIM):
In order for the ME to operate in a GSM network for services other than the emergency
services, a valid IMSI stored on if, must present. With the insertion of the SIM card the ME
will become a fully functional Mobile Station. Certain subscriber parameter together with
personal data used by the subscriber, e.g. frequently called number will be stored on the SIM.
There are three types of subscriber related information that is stored on the SIM.
• Subscriber data – IMSI, authentication key (Ki) and access control class.
• Network data - TMSI, LAI, Kc, forbidden PLMNs
• Service related data – language preference, advice of charge.
7. GSM IDENTITIES
• Mobile Station ISDN Number (MSISDN)
The MSISDN is a number, which uniquely identifies a mobile
Telephone subscription in the PSTN numbering plan.
In GSM 900/1800,the MSISDN consists of a following:
MSISDN = CC + NDC + SN
National mobile number
International mobile station
ISDN number
• International Mobile subscriber Identity (IMSI)
The IMSI is a unique identity allocated to each subscriber. It is
used for correct identification over the radio path and
through GSM PLMN network. All network-related subscriber
information is connected to the IMSI. The IMSI is stored in the
SIM, in the HLR and VLR.
The IMSI consists of three parts:
IMSI = MCC+MNC+MSIN
Where,
MCC=Mobile Country Code
MNC=Mobile Network Code
MISN=Mobile Station Identification Code
• Temporary Mobile Subscriber Identity (TMSI)
The TMSI is used to protect the subscriber’s privacy on the air
inerface. The TMSI has only local signification (that is, within the
MSC/VLR area) and hence
Its structure can be determined by each operator. The TMSI should
not consist of more than four octets.
8. • International Mobile Equipment Identity (IMEI)
The IMEI is used for equipment identification and uniquely identities
a MS as a separate piece or assembly of equipment. The IMEI consists
of the following:
IMEI = TAC + FAC+ SNR + SVN
Where,
TAC = Type Approval Code
FAC = Final Assembly Code
SNR = Serial Number
SVN = Software Version Number
• Location Area Identity (LAI)
The LAI is used for paging and it tells MSC in which location area the
MS is located.
LAI = MCC + MNC+ LAC
Where,
MCC = Mobile Country Code
MNC = Mobile Network Code
LAC = Location Area Code
• Cell Global identity (CGI):
This is used for cell identification, within the location area. This is
done by adding a cell identity.
CGI = MCC + MNC + LAC + CI
Where
CI = cell Identity (16 Digits Maximum).
9. SERVICES:
Service provision to a certain subscriber depends on three items;
• The subscription must include this service
• The mobile equipment must be able to handle the service
• The network must be able to offer service
There are different types of basic services available in the GSM system
TELESERVICES
This section describes the major Teleservices supported by all GSM network.
• Speech
• Emergency calls
• Facsimile group 3
• Short message services
• Short message services cell broadcast
• Voice mail fax mail
• Alternative speech/fax
BEARER SERVICES
All GSM network offer a wide range of bearer services. The GSM interworking unit
(GIWU) supports all data services offered by the system. Asynchronous and synchronous
data transmission rates up to 9.6 kbit/s are supported.
• Traffic to Public Switched Telephony Network (PSTN)
• Traffic to Integrated Services Digital Network (ISDN)
• Traffic to Packet Switched Public Data Networks (PSPDN)
• Traffic to Circuit Switched Public Data Networks (PSPDN)
SUPLEMENTRY SERVICES
The supplementary services includes,
• Call forwarding
• Barring of outgoing and incoming calls
• Call hold
10. MOBILE MAXIMUM RANGE
Timing advance Χ bit period Χ velocity
Range =
2
Range =Distance between Mobile to MS
Timing advance =Delay of Bits (0-63)
Bit period =577/156.25 = 3.693 μsecs
= 3.693 Χ 10 e-6
Velocity = 3 Χ 10e5
(63) Χ (3.693 Χ 10e-6) Χ (3 Χ 10e5)
RANGE =
2
RANGE = 34.9 Kms.
LOCATION UPDATE
The process of mobile informing the MSC about its current Location area is called as
Location update.
There exist three different causes for the MS to start the Location Updating
Procedure.
There are,
1) Types of normal location update.
2) IMSI Attach.
3) Periodic Location update.
Types of normal Location update:
• Mobile turns on power
• Reads the new LAI
• If different, does a location update.
IMSI Attach:
• Mobile turns off and sends an IMSI detach to MSC
• Mobile turns on again and compares LAI
• If same, sends an IMSI Attach to MSC.
11. Periodic Location Update:
• Mobile coverage non-coverage zone
• MSC goes on sending pages
• Mobile has to inform MSC after set period.
HANDOVER
Handover is a processor by which the control/communication of a mobile is
transferred from one cell to the another.
Criteria for Handover:
• Receive Quality (RX QUAL) on Uplink or Downlink
• Receive signal strength (RXLEV) on Uplink or Downlink
• Distance (Timing Advance)
• Interference level
• Power budget
Types of Handover:
1) Intra – Cell Handover
Handover between Channels / Time slots of same cell.
2) Inter – cell Handover
Handover between cells of same BTS.
3) Intra – BSC Handover
This type of Handover takes place if the cell to which Handover
is to done belongs to the same BSC.
4) Inter – BSC Handover
This type of Handover, the mobile is handed over to a cell
which belongs to another BSC.
5) Inter – MSC Handover
If the cell belongs to another MSC, then is Inter –MSC
Handover.
LOSSES
Path Losses:
These losses occurred due to the transmission in air depends on Distance.
Path losses =20 log (4πd / λ)
Where,
Frequency (f) =1/ λ, d = Distance between MS and BTS.
12. Shadowing losses:
These losses occurred due to the physical obstacles. (like one building)
It is also called as Long Term Fading.
Multi-path (or) Rayleigh fading:
These losses occurred due to interference of direct and reflected the signals.
Carrier to Interference (C/I):
It is also called as Co-Channel interference. It is the relation between the desired signal C and
the undesired re-used signal I, both using the same carrier frequency.
Carrier to Interference (C/I) ≥9dB
Carrier, f1 Interference, f1
C/I ≥9dB
C
I
Carrier to Adjacent (C/A):
The relation between the desired signals A from the correct carrier and the undesired signal
A from the carrier 200khz away is called adjacent channel interference or C/A.
Adjacent, f1±200khz Carrier,f1
C/A>-9dB
A
C
Carrier to interference (C/I) ≥-9dB
13. BURST AND FRAMES :
A Burst is a formatted sequence of bits during one-time slots.
Due to TDMA structure with time slots, we do not send continuously but only in the
designated time slots. The information sent during one time slot is formatted into a Burst.
0 1 2 3 4 5 6 7
4.615ms
Data Training Data
3 57 1 26 1 57 3
burst 148 bits
156.25 bits
0.577 ms
Types of Burst:
1) Normal Burst (NB):
It is used to carry information on traffic and control channels.
The normal burst contains;
• 2 information fields, each with 57 bits, used for encrypted speech or data
• One training sequence to be used by the equalizer in the receiver
• 2 bits to indicate whether the burst is “stolen” to be used as a FACCH
• 3 bits in each end to serve as start and stop bits.
TB Encrypted 1 Training sequence 1 Encrypted bits TB GP
3 57 26 57 3 8.25
2) Access Burst (AB):
It is for random access and handover access.
The Access burst is as short as possible, to allow a certain delay without interfering with
the next time slots.
TB INFORMATION Guard period
8 68.25
14. 3) Synchronization Burst (SB):
It is used for frame synchronization of the mobile. To know the when certain
information is broadcasted.
4) Frequency Burst (FB):
It is used for frequency synchronization of the mobile.
5) Dummy Burst (DB):
It is used when on other type of burst is to be sent.
THE RELATIONSHIP BETWEEN BURST AND FRAMES
There are two types of multiframes
• 26 TDMA frame multiframes are used to carry TCH, SACCH and FACCH.
• 51 TDMA frame multiframes are used to carry BCCH, CCCH, SDCCH and
SACCH.
The superframe consists of 26 or 51 multiframes and hyperframe consists of 2048
superframes.
Authentication:
Security function for authenticating the SIM which is mandatory for any MS is based on the
crypto graphical algorithm A3, and the secret subscriber authentication key Ki. Both A3 and
Ki are located on the SIM.
Authentication procedure
The authentication procedure is initiated form the MSC/VLR by sending RAND to the MS.
the MSC/VLR has fetched the triplets from the HLR. Now the MS calculates the SRES and
Kc using the same algorithms as the AUC. The calculated SRES will be sent to MSC/VLR
which compares this SRES received form the MS with the one in the triplet from the AUC. if
the two are same access will be granted . The calculated Kc will be stored in the SIM card.
Ciphering
The security function that ciphers the information sent and received by the MS required the
cipher key Kc. The generation of the Kc is based on the crypto graphical algorithms A8, and
the Ki. Also A8 is located on the SIM.
15. Ciphering start procedure
This ciphering start procedure is initiated from the MSC/VLR by sending the message a
cipher mode command the Kc. The Kc will be removed form the message by the BTS before
sending it on to the MS, so that the Kc will be never be sent on the air. When the MS
receives this message it will be send the message cipher mode complete in the cipher mode
using the calculated Kc stored on the SIM card. If the BTS can decipher this message it will
be inform the MSC/VLR that ciphering has started.
DIVERSITY:
Diversity is actual used for to avoid the fading dip of receiving antenna. If the receiving
antenna is located in a fading dip, there are only two ways of getting away from the dip,
• The receiving antennas are move away from the dip.
• The fading dip must be moved away from the antenna.
Types of diversity
1. Space diversity
2. Frequency diversity
Space diversity:
By using two receiving antennae at the base station, chances are that neither of them will be
in a fading at the same time. A certain distances between the antennae are necessary, and 4-6
meters is recommended for GSM.
There are different methods of combining the two received signals.
• Either the system can alternate between the two antennae
• Always using the antennae with the highest signal strength
• Both receiving antennae can used all time
Frequency diversity:
Another effective way to multi-path fading is to change the frequency, thus changing the
positions of dips. When frequency hopping is applied in GSM, each consecutive burst will be
transmitted at a different frequency. The frequencies used are changed either according to a
cyclic pattern or a pseudo-random pattern.
CHANNEL CODING:
The Different methods of channel coding used in GSM are,
• Block coding
• Convolutional coding
16. Block coding:
When the block coding is used, one or several check bits are added to the information block.
The check bits only depend on the bits in that every block. A simple form of block coding is
using is parity coding. Block coding is mainly used for detecting errors.
Convolutional coding:
The Convolutional coder consists of a shift register into which the information bits are
shifted one by one. Convolutional coding is not only good for detecting errors, but also for
correcting them.
INTERLEAVING:
Interleaving is a method spreading the potential losses, so that they can be taken care of by
“channel coding” thus minimizing the harm burst.
In GSM the channel coder produces a total of 456 bits for every 20 ms segment of speech.
These are in blocks of 57 bits interleaved over the burst.
EQUALISER:
The equalizer will mainly address the problems of Inter Symbol interference, desired earlier.
The problem is that the air interface affects the signals in some way that causes bit error in
the receiving side.
In a normal burst, used for traffic, there is a 26 bits training sequence in the middle of the
burst.
TB Encrypted 1 Training sequence 1 Encrypted bits TB GP
3 57 26 57 3 8.25
TIMING ADVANCE:
The radio signals take finite period of time to travel from the mobile station to the base
station. it is called propagation delay.
The system will repeatedly send “timing advance” orders to the MS. The system will simply
tell the MS how many bit times earlier, or later, to send. These decisions are based on an
analysis of how the bursts are received in the base station.
• BSS calculates access delay from RACH in terms of bits.
• Informs mobile to delay its in terms of bits
• Maximum Timing advance of 63 bits.
17. SIGNAL PATH THROUGH THE NETWORK
Antenna
Transmitting part Receiving part
Transmitter Receiver
Modulator De-Modulator
33.8 kbits
Burst formatting viterbi equalizer
Ciphering
De-ciphering
Interleaving
De-interleaving
22.8 kbits/s
Channel coding Channel decoding
13 kbits/s
260 kbits
Speech coding
Speech decoding
Segmentation 20ms
8 kbits
13 bits D/A conversion
A/D conversion
AREAS:
1) PLMN SERVICE AREA
The Public Land Mobile network (PLMN) is a geographical area served by one network
operator and is defined as the area in which an operator offers radio coverage and possibility
to access its network.
18. 2) MSC/VLR (SERVICE AREA)
If the system has more than one MSC,the PLMN is subdivided into several MSC/VLR
service areas. To be able to route calls to the right MSC and eventually to the right MS, it is
necessary to know in which MSC/VLR service area the MS is.
The HLR stores the data ,about which MSC/VLR service area the MS is in. The VLR
contains detailed information about all the MS:s in the MSC/VLR service area.
3) LOCATION AREA
Location area is an identity, which specifies a group of cells as defined by the technicians is
called as location area.
Each MSC/VLR service area is subdivided into a number of location area (LA). Information
about, in which location area an MS is registered, is also stored in the VLR together with
subscriber data of all the visiting subscribers in that MSC/VLR service area.
If an MS move within the location area ,the system does not need to change the information
in the subscriber register i.e.VLR and HLR.If the MS crosses over into a cell belonging to a
new location area however, the system must be informed. This report done by the MS to the
system is called “location updating”.
One LA may include cells from different BSC: s, and cells belonging to one BSC may be
subdivided into several LA: s.
CLUSTER
A group of neighboring cells using all the frequencies available in the system frequency band
is called a cluster of cells.
4) CELLS
Location area subdivided into a number of cells. A cell is the geographical area
covered by one Base Transceiver Station. A cell is the smallest geographical entity in a
PLMN.A cell could be any size, from a radius of tens of kilometers down to a radius of
tens or hundreds of meters.
GSM SERVICE AREA
The GSM service area is the total geographical area in which subscriber can access the
network. The more operators who sign contracts agreeing to work together, the more
this area will increase.
19. GSM service area
PLMN service area (one per operator)
Location area
Cell
INTERFACES:
There are different types interfaces
• Air Interface (or) Um Interfaces]
Interface between the MS and BTS
• Abis Interface
Interface between the BTS and BSC
• A Interface
Interface between the BSC and MSC
Um Abis A
MS BTS BSC MSC
TRAFFIC CASES
CALL TO A MOBILE STATION
The difference between making a call to a mobile subscriber and a PSTN network
subscriber is that the mobile subscriber’s location is unknown. Therefore, the mobile
station must be paged before a connection can be made. The steps in the call setup
procedure from a PSTN subscriber to a mobile station are listed below. The numbers
refer to figure
20. 1. The PSTN subscriber dials the mobile subscriber’s number. the Gateway MSC
receives the call.
2. The Gateway MSC requires the HLR for the information needed to route the
call to the serving MSC/VLR.
3. The GMSC routes the call to the MSC.
4. MSC checks VLR for the Location Area of the mobile station.
5. MSC contacts the mobile station via BSC and BTS by sending a page request.
6. The mobile station responds.
7. BSC selects a traffic channel and orders the mobile station to tune to this
traffic channel. The mobile station generates a ringing signal and when the
subscriber answers the speech-connection is established.
2
3
HLR GMSC MSC / VLR 4
BTS 5
1
7
PSTN BTS BTS BTS
6
CALL FROM A MOBILE STATION
When a mobile station wishes to establish a speech call, the following steps are performed:
the numbers refer to figure.
1. Mobile subscriber dials the number.
2. MSC /VLR receives a message requesting access.
3. MSC /VLR checks if the mobile station is authorized to initiates a call set up to the
PSTN network.
4. the dialed number is analyzed by MSC /VLR , which in turn initiates a call set-up to
the PSTN network.
5. MSC / VLR asks bsc to allocate a free traffic channel. This information is forwarded
to BTS and the mobile station.
6. the person receiving the call answer and a connection is established.