Contract adminstration and planning
•Download as PPT, PDF•
0 likes•109 views
This document provides an introduction to contracts and project planning for dam construction projects. It defines key terms like contracts, projects, and project planning. It outlines the essential elements of a contract and describes the typical parties involved in construction projects. It also discusses different types of construction contracts and how project work is typically measured and paid. Finally, it lists the typical documents that make up a construction contract.
Report
Share
Report
Share
Recommended
Delay analysis of raw water reservoir and pumping Station
Delay Analysis of raw water reservoir and pumping station using PRIMAVERA SOFTWARE, with a case study.
Pp2 group assignment
The contractor submitted their final accounts within 6 months of practical completion as required. The quantity surveyor assessed the application and prepared the final account. It included granting the contractor an extension of time and RM30,000 for additional insurance due to employer delays. Nominated subcontractors' accounts were added back with adjustments. The final contract value was RM71,582,500 with RM30,000 granted for loss and expenses and an extension of time granted.
Rihan Height Project Execution Plan-Rev00
This document provides a project execution plan for a district cooling plant project in Rihan Heights, UAE. Key details include:
- The project involves design, construction, and operation of a 4,000 ton district cooling plant, reticulation network, and energy transfer stations.
- The fast track project is to be completed by May 13, 2011 on a fixed price contract.
- Execution will involve in-house engineering, procurement through central procedures, and subcontracting of packages while ensuring quality and safety standards.
Kandil_Sameh_AR50123
This document outlines an assignment for a practical scenario involving the construction of a district cooling plant project in the UAE. It provides context for the project, including details about the employer, main contractor, type of contract used, and scope of work. It then lists the requirements for the assignment, including describing the basis for contract selection, aspects of design liability, risk apportionment, potential unforeseen problems, and dispute resolution techniques. Guidance is provided on referencing legal principles and contract clauses. The maximum length for the response is 2,000 words.
Professional Practice 2: Group Assignment
The document discusses the procedure and essential elements involved in preparing a final account. It defines key terms like final account, provisional sums, and prime cost sums. The procedure for final account involves the contractor submitting documents within 6 months of completion for the architect to complete the account within another 6 months. Adjustments must be made for variations, remeasuring provisional quantities, omitting unused provisional/prime cost sums, and adding back nominated subcontractors' accounts. Implications of omitting works from the bill of quantities and not allowing them as provisional sums are discussed from the client and contractor perspectives.
FINAL ACCOUNT CONCLUSION OF BUILDING PROJECTS
AN INVESTIGATION OF FACTORS THAT LEAD TO DELAYED FINAL ACCOUNT CONCLUSION OF BUILDING PROJECTS IN MALAWI CONSTRUCTION INDUSTRY
Pp1 seminar
This document discusses provisions for variation orders, prime cost sums, and provisional sums in construction contracts according to the PAM standard form. It defines variation orders as changes to the original job scope agreed upon by further contract agreement. Prime cost sums cover specialized works and materials using nominated subcontractors, while provisional sums are for works that cannot be fully determined at the time of bidding. The document then examines clauses related to valuation rules for variations, claiming additional expenses, and contractor access to records for claims.
Precon Phase Services
The document discusses Ryan Construction's preconstruction phase services which involve engaging them early in the design process. This allows Ryan to confirm the design can be completed within budget and schedule, reducing redesign costs. Their process includes attending meetings, reviewing plans, developing schedules, assisting with permitting and providing cost estimates to control costs. Their goal is to create partnerships, plan the project, estimate costs accurately and identify any funding issues to deliver the project on time and on budget.
Recommended
Delay analysis of raw water reservoir and pumping Station
Delay Analysis of raw water reservoir and pumping station using PRIMAVERA SOFTWARE, with a case study.
Pp2 group assignment
The contractor submitted their final accounts within 6 months of practical completion as required. The quantity surveyor assessed the application and prepared the final account. It included granting the contractor an extension of time and RM30,000 for additional insurance due to employer delays. Nominated subcontractors' accounts were added back with adjustments. The final contract value was RM71,582,500 with RM30,000 granted for loss and expenses and an extension of time granted.
Rihan Height Project Execution Plan-Rev00
This document provides a project execution plan for a district cooling plant project in Rihan Heights, UAE. Key details include:
- The project involves design, construction, and operation of a 4,000 ton district cooling plant, reticulation network, and energy transfer stations.
- The fast track project is to be completed by May 13, 2011 on a fixed price contract.
- Execution will involve in-house engineering, procurement through central procedures, and subcontracting of packages while ensuring quality and safety standards.
Kandil_Sameh_AR50123
This document outlines an assignment for a practical scenario involving the construction of a district cooling plant project in the UAE. It provides context for the project, including details about the employer, main contractor, type of contract used, and scope of work. It then lists the requirements for the assignment, including describing the basis for contract selection, aspects of design liability, risk apportionment, potential unforeseen problems, and dispute resolution techniques. Guidance is provided on referencing legal principles and contract clauses. The maximum length for the response is 2,000 words.
Professional Practice 2: Group Assignment
The document discusses the procedure and essential elements involved in preparing a final account. It defines key terms like final account, provisional sums, and prime cost sums. The procedure for final account involves the contractor submitting documents within 6 months of completion for the architect to complete the account within another 6 months. Adjustments must be made for variations, remeasuring provisional quantities, omitting unused provisional/prime cost sums, and adding back nominated subcontractors' accounts. Implications of omitting works from the bill of quantities and not allowing them as provisional sums are discussed from the client and contractor perspectives.
FINAL ACCOUNT CONCLUSION OF BUILDING PROJECTS
AN INVESTIGATION OF FACTORS THAT LEAD TO DELAYED FINAL ACCOUNT CONCLUSION OF BUILDING PROJECTS IN MALAWI CONSTRUCTION INDUSTRY
Pp1 seminar
This document discusses provisions for variation orders, prime cost sums, and provisional sums in construction contracts according to the PAM standard form. It defines variation orders as changes to the original job scope agreed upon by further contract agreement. Prime cost sums cover specialized works and materials using nominated subcontractors, while provisional sums are for works that cannot be fully determined at the time of bidding. The document then examines clauses related to valuation rules for variations, claiming additional expenses, and contractor access to records for claims.
Precon Phase Services
The document discusses Ryan Construction's preconstruction phase services which involve engaging them early in the design process. This allows Ryan to confirm the design can be completed within budget and schedule, reducing redesign costs. Their process includes attending meetings, reviewing plans, developing schedules, assisting with permitting and providing cost estimates to control costs. Their goal is to create partnerships, plan the project, estimate costs accurately and identify any funding issues to deliver the project on time and on budget.
contract procedure
The document discusses various topics related to construction contract procedures, including:
1. Traditional and alternative contract systems such as lump sum based on bill of quantities, drawings and specifications, PC with target cost, and turnkey contracts.
2. The main responsibilities of the contractor include performing the work, the contractor receiving progress payments, and the contractor having the right to payments from the main contract.
3. The differences between domestic subcontractors, nominated subcontractors, and nominated suppliers in terms of their responsibilities and payment processes.
Claim Presentation Rev 03 FINAL
The document outlines a claim analysis for a mechanical contract for an upgrade to a mill plant that was delayed due to late equipment delivery, defective equipment, drawing revisions, and lack of access to work areas. It analyzes the causes of over 85 days of delay and over $2.8 million in damages from unpaid change orders, loss of profit, indirect costs, and loss of productivity. The contractor is submitting this claim against the engineer who terminated the $2.5 million lump sum contract with only $1.8 million in total payment.
Project Management Diagnostics for Time Management
To crash or not to crash. Take the guesswork out of your project deadlines.
Review of Cost Time Trade-Offs of Crashing a Project
Probability of Completing a Target Date using PERT Analysis Techniques
Rev207 matrixexcelfile
The document describes three modes of architectural service:
A) Regular services where the architect negotiates contracts with contractors and evaluates work accomplished, procures materials and permits, authorizes payments, and keeps records.
B) Design-build on a guaranteed maximum cost where the architect is responsible for design and full-time construction supervision, and gives the client a guaranteed maximum construction cost.
C) Design-construct where the architect is responsible for design and construction management, and may have a patent for an innovative design or construction method.
M3 Lecture 11 provisional sum prime cost sum
Provisional sums are amounts included in a construction contract for work that is not fully defined at the time of tendering. There are two types: defined provisional sums where some information is provided, and undefined where minimal information is given. Contractors are expected to account for these sums in their programming and preliminaries. Provisional sums are expended through an architect's instruction and valued like a variation. Risks include the actual cost exceeding the amount allowed if the work changes from tender to completion. Prime cost sums are for nominated subcontractors or suppliers, and exclude any overhead and profit for the main contractor.
Project closure
This document discusses the process of closing a construction project. It involves several key steps:
1) Creating a punch list of deficiencies to be addressed by the contractor. 2) Issuing a certificate of substantial completion to end liquidated damages when the project is sufficiently complete. 3) Obtaining a certificate of occupancy when the project complies with codes. 4) Demobilizing resources like staff. 5) Financially closing out the project through final payment, releasing guarantees, and settling changes. 6) Formally closing the contract by submitting as-built drawings, manuals, warranties, and test reports. 7) The project manager analyzes costs and gathers feedback. 8) Lessons learned are documented for future projects.
Boq of khadeja storage tank, well, and booster pumping station
This document outlines the bill of quantities for a construction project to build a water storage tank, well, and booster pumping station in Beit Hanoun, Gaza. It includes 7 sections for different components of the work: (A) water tank, (B) booster station, (C) well, (D) piping yard, (E) service building, (F) electrical works, and (G) miscellaneous works. It specifies that unit prices will be in US dollars and cover all costs to complete the work, including materials, labor, equipment, insurance, and permits. It also requires installation of a remote monitoring and control system to allow SMS and email reporting on the status of the well.
DEFECTS LIABILITY AND TAKING OVER CLAUSES
DEFECTS LIABILITY AND TAKING OVER CLAUSES COMPARISON W.R.T DIFFERENT CONTRACT AGREEMENTS VIS. CPWD,FIDIC,NEC,AIA
Sunny Mui_X474.3_Contract Closure
The document outlines the steps and responsibilities for closing out a contract between Hayward Japan Grill and a contractor for a Point-of-Sale (POS) system project. Key actions include obtaining agreement on deliverables, documenting test results and changes, preparing financial reports, releasing resources, negotiating unresolved items, approving final payments, documenting lessons learned, notifying parties of completion, and celebrating the project close. Responsibilities are assigned to the Hayward Japan Grill project manager and contractor project manager.
Project End Report - Project Management template
Optimise-GB provides you with a free template for the Project End Report. This is a very useful document at the end of the project to take stock and compare the achieved results against those originally expected. This report lists the project deliverables and against each will suggest what was completed in time, cost and within the quality requirements. This document will also list the number and descriptions of the change requests, and the associated impact of each on the project. Please contact me should you have any questions on simon@optimise-gb.com. Many thanks Simon Misiewicz
Civil Supervisor
The Civil Supervisor leads and supervises a team of civil and structural engineers and subcontractors to complete all civil and structural activities for construction projects. Key responsibilities include planning construction activities in line with project requirements, instructing subcontractors, ensuring material availability, generating daily and weekly status reports, attending meetings to resolve issues, coordinating with clients, and evaluating subcontractor performance.
Risk assessment plan example
This risk assessment document evaluates risks associated with a construction project. It identifies hazards in areas like design, external factors, environmental issues, organizational challenges, project management, and construction. Specific risks addressed include design errors, climate conditions, workforce turnover, scheduling errors, and cost overruns. Each risk is evaluated based on its severity, likelihood of occurring, and risk priority number to determine its level. Risk levels are classified as high, warning, medium, or warning. The document outlines additional control measures to mitigate high priority risks and recommends frequent review of all risks.
Extension of time Analysis
This document discusses various approaches to analyzing delays in construction projects, including As-Planned vs As-Built, Impacted As-Planned, Collapsed As-Built, and Time Impact Analysis using snapshot and window approaches. It defines key delay analysis terms and provides examples of inserting delays into schedules and calculating extension of time and costs using different methods. The preferred approach discussed is window-based Time Impact Analysis, which divides a project into time windows and compares schedules to determine delay impacts at different points in time. Concurrent delays that cannot be separated are generally only entitled to extension of time but not additional costs.
Bo Q Preamble Td2 3 Jan 20
This document provides a preamble and bill of quantities for the rehabilitation of drainage systems in the Ararat Valley. It outlines items to be measured and paid for, including:
1. Estimated work quantities that do not represent actual quantities to be executed.
2. Rates that cover all contractor obligations and matters to properly execute and maintain the works.
3. Daywork rates for labor, equipment, and materials.
It also specifies payment procedures for performance security, insurance, and temporary works.
Coordinated project information (cpi)
This document discusses the process of working drawings, detailing, tendering, contract procurement and administration for construction projects from start to finish. It provides an overview of the minimum requirements for working drawings, outlines the stages of tender documents and contract procurement, and describes the routines involved in handing over the site to the contractor, basic construction monitoring checkpoints, and activities required to manage the project until final completion and certification.
Estimating seminar 1 slides
This document discusses sub-contracting work and the differences between a nominated sub-contractor and domestic sub-contractor. A nominated sub-contractor is selected by the client or consultants and has negotiated terms and prices with the client. A domestic sub-contractor is selected by the main contractor without client input on terms or prices. The document provides examples of different types of specialized works that may be given to each type of sub-contractor and discusses advantages and disadvantages of using a nominated sub-contractor.
Variations in works contracts
This document discusses variations and deviations that may occur during contract execution. It defines variations as changes to the scope of work, while deviations refer specifically to changes in quantities, items, or conditions from what is specified in the bill of quantities. The reasons for variations and deviations include errors in estimating, design changes, unavailable materials, and client/contractor revisions. Extra items not included in the original bill are also addressed. The document outlines how rates for quantity deviations, extra items, and substituted items are typically determined in the contract or through other agreed methods. Implications like time and cost overruns and potential disputes are also noted.
project planning of water management
The document outlines the project planning process for a small-scale water resources development project in Bangladesh. It involves creating plans for project management, quality, risk, acceptance, communication, procurement, and review. The plans cover scheduling tasks and activities, allocating resources and responsibilities, identifying requirements and constraints, and establishing processes for execution and oversight. Quality control and community engagement are emphasized.
Sample architectural drafting contract
This contract is between an owner and Zimarc Architectural Drafter for drafting services related to converting an 8-unit multi-family residential building to a 4-unit building. The contractor will provide measured drawings of the existing building, a layout of a new bedroom addition, and a preliminary review set. Services include site visits, code research, and one revision if needed. The owner agrees to pay $XXX, with a retainer due upon signing and the remainder due upon completion. Additional revisions will be charged hourly.
1 regatta quay rehab boq 20120420 blank
This document contains the bill of quantities and daywork schedule for rehabilitation works at Regatta Quay in Dockyard Creek, Cospicua. It includes preliminaries, demolition works, excavation and filling, in situ concrete works, formwork, accessories, miscellaneous works, and a daywork schedule with hourly rates for labor and plant. The preliminaries section outlines general requirements and obligations of the contractor, including site access, insurance, cleaning, and health and safety provisions. Quantities and rates are provided for items such as the removal of fixtures, reduction of slipway ramp levels, concrete filling, and underpinning foundations.
Kandil_Sameh_CPMPart 4 _b
This close out report summarizes the completion of the Copham Hospital project. It describes how all work was formally accepted by consultants and authorities, though some remedial works remain. Time performance was 35 days behind schedule due to client change orders and weather, while costs increased by £760,000 primarily because of change orders and contractor prolongation costs. Quality issues were minor with 18 non-conformance reports addressed. Lessons learned include obtaining all stakeholder requirements upfront to avoid changes, allowing more design time, and protecting floors during commissioning.
Process of pre construction phase drawbacks
The document discusses the process of pre-construction planning in Mumbai. It outlines the primary goals of pre-construction as minimizing time and costs while maintaining quality. Standard components include reviewing documents, creating a work breakdown structure, and establishing a time plan. Existing drawbacks include starting construction before completing designs. The roles of architects include project design, approvals, drawings, contractor selection, and monitoring construction. Different types of construction contracts are also discussed.
More Related Content
What's hot
contract procedure
The document discusses various topics related to construction contract procedures, including:
1. Traditional and alternative contract systems such as lump sum based on bill of quantities, drawings and specifications, PC with target cost, and turnkey contracts.
2. The main responsibilities of the contractor include performing the work, the contractor receiving progress payments, and the contractor having the right to payments from the main contract.
3. The differences between domestic subcontractors, nominated subcontractors, and nominated suppliers in terms of their responsibilities and payment processes.
Claim Presentation Rev 03 FINAL
The document outlines a claim analysis for a mechanical contract for an upgrade to a mill plant that was delayed due to late equipment delivery, defective equipment, drawing revisions, and lack of access to work areas. It analyzes the causes of over 85 days of delay and over $2.8 million in damages from unpaid change orders, loss of profit, indirect costs, and loss of productivity. The contractor is submitting this claim against the engineer who terminated the $2.5 million lump sum contract with only $1.8 million in total payment.
Project Management Diagnostics for Time Management
To crash or not to crash. Take the guesswork out of your project deadlines.
Review of Cost Time Trade-Offs of Crashing a Project
Probability of Completing a Target Date using PERT Analysis Techniques
Rev207 matrixexcelfile
The document describes three modes of architectural service:
A) Regular services where the architect negotiates contracts with contractors and evaluates work accomplished, procures materials and permits, authorizes payments, and keeps records.
B) Design-build on a guaranteed maximum cost where the architect is responsible for design and full-time construction supervision, and gives the client a guaranteed maximum construction cost.
C) Design-construct where the architect is responsible for design and construction management, and may have a patent for an innovative design or construction method.
M3 Lecture 11 provisional sum prime cost sum
Provisional sums are amounts included in a construction contract for work that is not fully defined at the time of tendering. There are two types: defined provisional sums where some information is provided, and undefined where minimal information is given. Contractors are expected to account for these sums in their programming and preliminaries. Provisional sums are expended through an architect's instruction and valued like a variation. Risks include the actual cost exceeding the amount allowed if the work changes from tender to completion. Prime cost sums are for nominated subcontractors or suppliers, and exclude any overhead and profit for the main contractor.
Project closure
This document discusses the process of closing a construction project. It involves several key steps:
1) Creating a punch list of deficiencies to be addressed by the contractor. 2) Issuing a certificate of substantial completion to end liquidated damages when the project is sufficiently complete. 3) Obtaining a certificate of occupancy when the project complies with codes. 4) Demobilizing resources like staff. 5) Financially closing out the project through final payment, releasing guarantees, and settling changes. 6) Formally closing the contract by submitting as-built drawings, manuals, warranties, and test reports. 7) The project manager analyzes costs and gathers feedback. 8) Lessons learned are documented for future projects.
Boq of khadeja storage tank, well, and booster pumping station
This document outlines the bill of quantities for a construction project to build a water storage tank, well, and booster pumping station in Beit Hanoun, Gaza. It includes 7 sections for different components of the work: (A) water tank, (B) booster station, (C) well, (D) piping yard, (E) service building, (F) electrical works, and (G) miscellaneous works. It specifies that unit prices will be in US dollars and cover all costs to complete the work, including materials, labor, equipment, insurance, and permits. It also requires installation of a remote monitoring and control system to allow SMS and email reporting on the status of the well.
DEFECTS LIABILITY AND TAKING OVER CLAUSES
DEFECTS LIABILITY AND TAKING OVER CLAUSES COMPARISON W.R.T DIFFERENT CONTRACT AGREEMENTS VIS. CPWD,FIDIC,NEC,AIA
Sunny Mui_X474.3_Contract Closure
The document outlines the steps and responsibilities for closing out a contract between Hayward Japan Grill and a contractor for a Point-of-Sale (POS) system project. Key actions include obtaining agreement on deliverables, documenting test results and changes, preparing financial reports, releasing resources, negotiating unresolved items, approving final payments, documenting lessons learned, notifying parties of completion, and celebrating the project close. Responsibilities are assigned to the Hayward Japan Grill project manager and contractor project manager.
Project End Report - Project Management template
Optimise-GB provides you with a free template for the Project End Report. This is a very useful document at the end of the project to take stock and compare the achieved results against those originally expected. This report lists the project deliverables and against each will suggest what was completed in time, cost and within the quality requirements. This document will also list the number and descriptions of the change requests, and the associated impact of each on the project. Please contact me should you have any questions on simon@optimise-gb.com. Many thanks Simon Misiewicz
Civil Supervisor
The Civil Supervisor leads and supervises a team of civil and structural engineers and subcontractors to complete all civil and structural activities for construction projects. Key responsibilities include planning construction activities in line with project requirements, instructing subcontractors, ensuring material availability, generating daily and weekly status reports, attending meetings to resolve issues, coordinating with clients, and evaluating subcontractor performance.
Risk assessment plan example
This risk assessment document evaluates risks associated with a construction project. It identifies hazards in areas like design, external factors, environmental issues, organizational challenges, project management, and construction. Specific risks addressed include design errors, climate conditions, workforce turnover, scheduling errors, and cost overruns. Each risk is evaluated based on its severity, likelihood of occurring, and risk priority number to determine its level. Risk levels are classified as high, warning, medium, or warning. The document outlines additional control measures to mitigate high priority risks and recommends frequent review of all risks.
Extension of time Analysis
This document discusses various approaches to analyzing delays in construction projects, including As-Planned vs As-Built, Impacted As-Planned, Collapsed As-Built, and Time Impact Analysis using snapshot and window approaches. It defines key delay analysis terms and provides examples of inserting delays into schedules and calculating extension of time and costs using different methods. The preferred approach discussed is window-based Time Impact Analysis, which divides a project into time windows and compares schedules to determine delay impacts at different points in time. Concurrent delays that cannot be separated are generally only entitled to extension of time but not additional costs.
Bo Q Preamble Td2 3 Jan 20
This document provides a preamble and bill of quantities for the rehabilitation of drainage systems in the Ararat Valley. It outlines items to be measured and paid for, including:
1. Estimated work quantities that do not represent actual quantities to be executed.
2. Rates that cover all contractor obligations and matters to properly execute and maintain the works.
3. Daywork rates for labor, equipment, and materials.
It also specifies payment procedures for performance security, insurance, and temporary works.
Coordinated project information (cpi)
This document discusses the process of working drawings, detailing, tendering, contract procurement and administration for construction projects from start to finish. It provides an overview of the minimum requirements for working drawings, outlines the stages of tender documents and contract procurement, and describes the routines involved in handing over the site to the contractor, basic construction monitoring checkpoints, and activities required to manage the project until final completion and certification.
Estimating seminar 1 slides
This document discusses sub-contracting work and the differences between a nominated sub-contractor and domestic sub-contractor. A nominated sub-contractor is selected by the client or consultants and has negotiated terms and prices with the client. A domestic sub-contractor is selected by the main contractor without client input on terms or prices. The document provides examples of different types of specialized works that may be given to each type of sub-contractor and discusses advantages and disadvantages of using a nominated sub-contractor.
Variations in works contracts
This document discusses variations and deviations that may occur during contract execution. It defines variations as changes to the scope of work, while deviations refer specifically to changes in quantities, items, or conditions from what is specified in the bill of quantities. The reasons for variations and deviations include errors in estimating, design changes, unavailable materials, and client/contractor revisions. Extra items not included in the original bill are also addressed. The document outlines how rates for quantity deviations, extra items, and substituted items are typically determined in the contract or through other agreed methods. Implications like time and cost overruns and potential disputes are also noted.
project planning of water management
The document outlines the project planning process for a small-scale water resources development project in Bangladesh. It involves creating plans for project management, quality, risk, acceptance, communication, procurement, and review. The plans cover scheduling tasks and activities, allocating resources and responsibilities, identifying requirements and constraints, and establishing processes for execution and oversight. Quality control and community engagement are emphasized.
Sample architectural drafting contract
This contract is between an owner and Zimarc Architectural Drafter for drafting services related to converting an 8-unit multi-family residential building to a 4-unit building. The contractor will provide measured drawings of the existing building, a layout of a new bedroom addition, and a preliminary review set. Services include site visits, code research, and one revision if needed. The owner agrees to pay $XXX, with a retainer due upon signing and the remainder due upon completion. Additional revisions will be charged hourly.
1 regatta quay rehab boq 20120420 blank
This document contains the bill of quantities and daywork schedule for rehabilitation works at Regatta Quay in Dockyard Creek, Cospicua. It includes preliminaries, demolition works, excavation and filling, in situ concrete works, formwork, accessories, miscellaneous works, and a daywork schedule with hourly rates for labor and plant. The preliminaries section outlines general requirements and obligations of the contractor, including site access, insurance, cleaning, and health and safety provisions. Quantities and rates are provided for items such as the removal of fixtures, reduction of slipway ramp levels, concrete filling, and underpinning foundations.
What's hot (20)
Project Management Diagnostics for Time Management
Project Management Diagnostics for Time Management
Boq of khadeja storage tank, well, and booster pumping station
Boq of khadeja storage tank, well, and booster pumping station
Similar to Contract adminstration and planning
Kandil_Sameh_CPMPart 4 _b
This close out report summarizes the completion of the Copham Hospital project. It describes how all work was formally accepted by consultants and authorities, though some remedial works remain. Time performance was 35 days behind schedule due to client change orders and weather, while costs increased by £760,000 primarily because of change orders and contractor prolongation costs. Quality issues were minor with 18 non-conformance reports addressed. Lessons learned include obtaining all stakeholder requirements upfront to avoid changes, allowing more design time, and protecting floors during commissioning.
Process of pre construction phase drawbacks
The document discusses the process of pre-construction planning in Mumbai. It outlines the primary goals of pre-construction as minimizing time and costs while maintaining quality. Standard components include reviewing documents, creating a work breakdown structure, and establishing a time plan. Existing drawbacks include starting construction before completing designs. The roles of architects include project design, approvals, drawings, contractor selection, and monitoring construction. Different types of construction contracts are also discussed.
Contract Conditions
The document discusses various contract conditions related to determination, foreclosure, and risk and cost. It defines determination as ending a contractor's employment due to breach of contract and foreclosure as abandoning or reducing the scope of work. Grounds for determination include poor progress, defects, and corruption. If a contract is determined, performance guarantees are forfeited and the employer can complete the remaining work at the contractor's risk and cost. Foreclosure requires contractor compensation for work and materials. Early determination is preferable to avoid delays and cost overruns.
05 Contract Management.pptx . DEFINITION
Contract management is the systematic process of creating, administering, and enforcing contracts between two or more parties. It ensures both parties fulfill their obligations as outlined in the agreement and minimizes potential risks.
C. Site managment chapter 5.pptx
This document discusses project controlling and monitoring in construction, specifically time controlling and monitoring. It outlines factors that can affect construction timelines, including management, economic, owner/client, consultant, contractor, material/equipment, and external factors. It also discusses scheduling, performance reports, change requests, record keeping, and the purpose of maintaining site records in construction projects for reference, quality control, and monitoring financial and physical progress.
Project management Report - GROUP
This document outlines the roles and responsibilities of the project team involved in the 9 unit Kuarters dan Menaiktaraf Masjid Saidina Abu Bakar AS-Siddiq project. It includes the project manager overseeing planning, scheduling, budgeting, and monitoring progress. The architect is responsible for design drawings and advising throughout implementation. Other roles include the landscape architect, quantity surveyor, civil and structural engineers, and mechanical and electrical engineers, all providing specialized services and working closely together.
Extensions of Time - Contract Management
This document discusses extension of time (EOT) for project contracts. It defines EOT as providing additional time for a contractor to complete a project if it is delayed past the original completion date stipulated in the contract. Common reasons for project delays include delays in site access, approvals, materials, and payments. Both contractors and employers can be responsible for delays. If a delay is approved, an EOT is granted but does not necessarily include compensation; compensation must be separately established. Record keeping of delay reasons is important to determine responsibility.
Professional Practice 1 Proposal Report
This proposal is for a RM1.2 billion hotel and shopping complex project in Kuala Lumpur. The client wants full control of design and minimal changes to cost. The consultant recommends traditional procurement with two-stage selective tendering. For the contract, a lump sum contract is recommended using the PAM 2006 form as it provides the client control over design and ensures project is completed on time to avoid liquidated damages. The proposal discusses procurement options, advantages of traditional procurement, the tendering process, and justification for the contract recommendations to meet the client's requirements.
Contract payment and variation
The document discusses contract payments and variations for a construction management and supervision training program. It defines contract payments, advance payments, interim payments, final certificates, and retention. It describes the authority levels of the engineer, engineer's representative, and employer for approving payments. It also defines what constitutes a variation, references the relevant ICTAD documents for variations procedures, and outlines the authority and process for approving variations, including NWSDB's procedure.
Preparation of boq
The document discusses different procurement routes for construction projects, including traditional design-bid-build, design and build, and management contracting. Under the traditional approach, the developer hires a professional team including an architect, quantity surveyor, and engineer. The architect designs the building, the quantity surveyor prepares cost estimates and payment valuations, and engineers provide structural and mechanical support. Contractors then bid to build the design. Design and build contracts assign design and construction responsibility to a single contractor for a fixed price. Management contracts engage a contractor to manage the project in exchange for a fee, while the developer directly pays all construction costs.
Running head PMPM .docx
Running head: PM
PM 3
Name
Institution
Date
B. Rationale behind Cost and Time Estimate
During project planning, the project schedule as well as cost estimate are accepted. These will make the planning of the project’s work complete. At this point, one can start doing the work. Formally, this is termed as project execution and control. Consequently, execution refers to doing the work while control refers to tracking the work and ensuring that it is being done on time as well as within budget. The process of tracking completed work, which refers to scope deliverables against cost and time, is referred to as Earned Value Analysis. The purpose of performing Earned Value Analysis is to ensure that there is delivery within budget. In addition, the estimation of Earned Value Analysis helps in learning whether a good job was done in cost and time estimate. There are two important reasons for tracking actual cost and time as the project is being worked on. First, the data obtained is very essential input for future estimates. Secondly, this makes it possible to compare the actual cost and estimated costs at the end of the project, day by day, line by line and the planned schedule to the actual schedule.
c. Determination of the Project Budget
Cost Element
Activity
Cost Estimate ($ Millions)
Port Design
Electrical Requirements
4
Structural Requirements
3.5
Mechanical Requirements
4.5
System Design
Hardware
1.5
Software
1.0
Project management
5
Pre-commissioning of the port
5.5
Hook up
4.5
Commissioning
5.5
Total
35
Running head: RIORDAN PROJECT MANAGEMENT PLAN
PROJECT MANAGEMENT PLAN
10Scope Statement
Project Title: China Relocation
Date:Prepared by:
Project Justification:
This project plan involves the location of Riordan Manufacturing’s China operations in Hangzhou. The major driving force for this decision is the fact that the company’s Chinese partners already have the necessary facilities in place. In addition, another reason for this is that the Hangzhou city is proximal to the Qiantang River. Consequently, Qiantang River is significant since the access to the river is responsible for Hangzhou Bay, which is big enough to handle the company’s shipping needs. The project is also justified by the fact that there has been an increase in the volume of production from the China plant and therefore, if container shipping companies for instance the China Shipping Container Lines are utilized. The ports in Shanghai and Hong Kong are utilized by container shipping companies. However, Shanghai port, which is 180 kilometers away from the current location, results in extra logistical steps. The products of the company are transported to a port located on Qiantang River before being loaded into containers for .
Pp1 report
This document provides details on the procurement strategy for a proposed RM 1.2 billion hotel and shopping complex development project in Kuala Lumpur. It recommends using a traditional procurement method with two-stage selective tendering. For the procurement, traditional method is suggested as it allows the client full design control and cost certainty. For tendering, two-stage selective tendering is proposed as it provides a transparent contractor selection process while ensuring only qualified contractors bid. The document also justifies the choices of lump sum contract and PAM 2006 form of contract for the arrangement.
MODULE 5.pptx
The document discusses various concepts related to construction project billing and documentation. It covers bill of quantities, the architect's role in quality control, measurement book, running account bill, interim certificate, final checking certificate, contract types like lump sum and item rate, contingencies, work charged establishment, earnest money, sundry items, lead and lift. Key points covered are the purpose and contents of bill of quantities, architect monitoring specifications and acting as owner's representative, measurement book recording work quantities, interim certificates controlling progress and payments.
Pmp t09 project_execution_plan_rev_a
This document provides a project execution plan (PEP) for a project with the following key elements:
- It outlines the project scope, cost management procedures, risk management approach, planning and programming strategy, procurement methods, project resourcing and organization, quality control procedures, health and safety plans, commissioning and acceptance process, and post-occupancy evaluation.
- Appendices include the cost plan, master program, roles and responsibilities, project structure, directory, risk register, client coordination, change control procedures, and meeting strategy to support project delivery.
- The PEP establishes the framework and procedures for delivering the project on budget and schedule while meeting quality standards, and ensures clear communication and coordination between all project stakeholders
Contract_Design_for_Dam_Construction.pdf
The document outlines the key details of a contract for the construction of an earth dam and concrete spillway near Surat City, India to address water scarcity. It describes the stages of the contract including pre-contract planning, the contract stage involving roles and responsibilities, and the post-contract maintenance stage. Some key aspects covered include the unit price contract type, contractor selection process, scope of work, quality control measures, activity scheduling and approvals required. Procedures for payments, variations, dispute resolution and retention amounts are also provided.
Project management
This document outlines the phases and tools used to manage the HighPark Suites project in Kelana Jaya, Malaysia. It includes defining the roles of project team members, developing a work breakdown structure and schedule, identifying stakeholders, and describing the key phases of schematic design, design development, documentation, construction, and final completion. The goal is to complete the project on time, on budget, and meeting quality standards through careful planning and coordination of all involved parties.
Construction Project Schedule Example- Residential Building
The document provides an example construction project schedule for building a residential building. It discusses planning the schedule by defining the project scope, stakeholders, and work breakdown structure. It then describes developing the schedule by defining activities, sequencing them, determining durations, and identifying the critical path. The example schedule is for a G+1 residential building and includes activities, durations, and relationships for structural works and finishing works.
A Project On Comparative Analysis Of Cost Overrun And Time Delay In Road Cons...
This document presents a comparative analysis of cost overrun and time delay in road construction projects in India. It examines two road projects - WAKAN–KHOPOLI road and INDAPUR - AGARDANDA road - to identify the causes of cost and time overruns.
The study involved collecting preliminary data on the projects, including their budgets, timelines and contractors. It also involved surveying experts via questionnaires. The results showed the WAKAN–KHOPOLI road experienced a cost overrun of 2.3% and a time delay of 205 days due to factors like rising material and labor costs, land acquisition issues, and management problems. Comparing the two projects found differences in their completion time
FIDIC-Relevant to Time Management
A thorough analysis of FIDIC and it implication on COnstruction industry explained in this presentation for the beginners. It has been broken down to simplified version
Surrey education case study
This case study summarizes a school nursery refurbishment and extension project. Key details include:
- The project involved a new extension, internal alterations, floor leveling for accessibility, external landscaping works, and refurbishment of an existing nursery building.
- Planning and building regulations approvals faced delays, pushing the start date into the school term instead of the summer holidays as originally planned. This required renting a temporary modular unit to house the nursery during construction.
- The project was managed using the New Engineering Contract and involved monthly progress meetings, interim payments, and addressing issues like working around the school schedule and ensuring health and safety compliance.
- Upon completion, the project
Similar to Contract adminstration and planning (20)
Construction Project Schedule Example- Residential Building
Construction Project Schedule Example- Residential Building
A Project On Comparative Analysis Of Cost Overrun And Time Delay In Road Cons...
A Project On Comparative Analysis Of Cost Overrun And Time Delay In Road Cons...
Recently uploaded
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Gas agency management system project report.pdf
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Variable frequency drive .A Variable Frequency Drive (VFD) is an electronic device used to control the speed and torque of an electric motor by varying the frequency and voltage of its power supply. VFDs are widely used in industrial applications for motor control, providing significant energy savings and precise motor operation.
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Recently uploaded (20)
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Contract adminstration and planning
- 1. Ministry of Water Resources & Electricity Dams ImplementatIon UnIt GENERAL DIRECTORATE OF PROJECTS DAM COMPLEX OF UPPER ATBARA PROJECT Brief Introduction to Contracts& Planning Works ENG.Awad Hamdan Contracts & Planning Department
- 2. 1.Contract 1.1 Definition: A voluntary, deliberate, and legally binding agreement between two or more competent parties Contracts & Planning Department
- 3. 1.Cotracts 1.2 Contract’s Essentials • Offer • Acceptance • Objective • Obligations • Consideration • Competent Parties Contracts & Planning Department
- 4. 2. Project 2.1 Definition Set of one or more activities that should be performed within a period of time , budget and quality. Contracts & Planning Department
- 5. Contracts & Planning Department Project planning is the process that defines the project activities and end products that will be performed and describes how the activities will be accomplished. The purpose of project planning is to define each major task, estimate the time and resources required, and provide a framework for management review and control. 2. Project 2.3 Project Planning
- 6. Contracts & Planning Department project planning activities Scope: • To define the specific work to be performed and goals that define and bind the project. • to define the Estimates to be documented for planning, tracking, and controlling the project. • to define Commitments that are planned, documented, and agreed to by affected groups. • Project alternatives, assumptions, and constraints. 2. Project
- 7. 2. Project The planning process includes steps to estimate the size of the project, estimate the technical scope of the effort, estimate the resources required to complete the project, produce a schedule, identify and assess risks, and negotiate commitments. Contracts & Planning Department
- 8. 2. Project Repetition of the previous steps is necessary to establish the project plan. Typically, several iterations of the planning process are performed before a plan is actually completed. Contracts & Planning Department
- 9. 3. Construction Projects 3.1 Construction Project Parties • Client (Employer) • Consultant (Engineer) • Contractor 3.2 Contractual Relationship Between Parties • Employer-Consultant Contract • Employer-Contractor Contract Contracts & Planning Department
- 10. 4. Project’s Constraints Contracts & Planning Department
- 11. • Measurement Contract • Lump-sum Contract • Direct Labour Contract • Cost Plus Contract • • • • Based on Price Determination 5. Types of Contracts Contracts & Planning Department
- 12. 100% • Lump-sum Contract • Measurement Contract • Cost Plus Contract • Direct Labour Contract 0% 100% 5. Types of Contracts 0% Contractor’s RiskType of ContractEmployer’s Risk Contracts & Planning Department
- 13. Contracts & Planning Department Measurement for payment of drilling holes in any material will be made per linear metre actually drilled and when specified per hole drilled for setting up the drilling machine, shifting it from one borehole to another, within the site limits, including erection, dismantling and linking with energy and water sources. No measurement is made for re-drilling when grouting is carried-out by progress procedure. 6. MEASUREMENT AND PAYMENT Of Drilling Works
- 14. Contracts & Planning Department All boreholes stopped due to fault of the Contractor before reaching the depth required by the Engineer will not be considered for payment. 6. MEASUREMENT AND PAYMENT Of Drilling Works
- 15. Contracts & Planning Department Measurement for payment of water tests will be the number of water tests satisfactorily carried-out in 5 m sections or smaller than 5 m at the Engineer's request. Measurement for drainage hole will be made on the same basis as drilling. Measurement of grouting work will be made per hole drilled; when specified for handling and setting up the grouting equipment and the removal of the same per section grouted, and per kilo of dry material actually injected. 6. MEASUREMENT AND PAYMENT Of Drilling Works
- 16. 1. Drawings 2. Specification 3. Bills of Quantities 4. Conditions of Contract 5. Instructions to Tenderers 6. Soil Investigation Report 1. 2. 3. 4. 5. 6. 7. Contract’s Document 4.1 Contracts & Planning Department
- 17. 4.2 7. 8. 9. 10. 7. Agreement 8. Letter of Acceptance 9. Memorandum of Understanding 10.Contractor’s Schedules Contracts & Planning Department 7. Contract’s Document
- 18. ةةةةة ةةةةةةة ةةةة ةةة ةةةةة ةةةةةةةة ةةةةة Contracts & Planning Department Wishing you A Fruitful Training Period at DCUAP ةةةةةة ةةةة ة