Study on Effect of Twisted Tape Insert Geometry in Heat Exchangerijtsrd
The heat exchanger is a device used to transfer heat from hot fluid to cold fluid. The current research reviews existing work conducted in improving performance of heat exchanger by varying geometric profile, baffling space, baffling inclination and use of helical inserts. The existing researches were conducted using both experimental and numerical techniques. The effect of operational parameters on performance of heat exchanger is also presented. Deepak Bhoi | Sudhir Singh Rajput "Study on Effect of Twisted Tape Insert Geometry in Heat Exchanger" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-2 , February 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49163.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/49163/study-on-effect-of-twisted-tape-insert-geometry-in-heat-exchanger/deepak-bhoi
CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchang...ijtsrd
The flow properties of heat transfer across such corrugated channels are very distinct from parallel plate channels. The primary flow direction is parallel to the waviness of the channel of the corrugated channel, although the local flow direction is still changed due to the waviness of the channel. By flow recirculation, separation and re attachment, the thermal boundary layer formed on its walls is regularly disrupted and the convective heat transfer coefficient is thus increased. In this work, in corrugated channels, the convective heat transfer and pressure drop characteristics of flow have been tested numerically. On channels of uniform heat flux and fixed corrugation over a Reynolds number spectrum, 10000 = Re = 30000, numerical research was conducted. The impacts of channel configuration, variation in Reynold’s number, and concentration variations of nanoparticles in base fluid on heat transfer are discussed. As opposed to the traditional corrugated channel, a major heat transfer gain was associated with the proposed corrugated channel. Based on the nanofluid concentration, Reynold number and channel configuration of the corrugated channel, the average Nusselt number increased by a factor of 2.2 up to 2.8 compared to that of the semi circular corrugated channel. Compared with the effect of channel configuration variation, triangular corrugated channel was the best Nusselt numbers, followed by the shape Semi circular Triangular , and Semi circular corrugated channel with the lowest results. Prof. Pushparaj Singh | Rishi Kesh Jha "CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchanger using Different Corrugated Channel Configurations" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35706.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35706/cfd-analysis-for-heat-transfer-enhancement-of-a-corrugated-plate-heat-exchanger-using-different-corrugated-channel-configurations/prof-pushparaj-singh
Study on Effect of Twisted Tape Insert Geometry in Heat Exchangerijtsrd
The heat exchanger is a device used to transfer heat from hot fluid to cold fluid. The current research reviews existing work conducted in improving performance of heat exchanger by varying geometric profile, baffling space, baffling inclination and use of helical inserts. The existing researches were conducted using both experimental and numerical techniques. The effect of operational parameters on performance of heat exchanger is also presented. Deepak Bhoi | Sudhir Singh Rajput "Study on Effect of Twisted Tape Insert Geometry in Heat Exchanger" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-2 , February 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49163.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/49163/study-on-effect-of-twisted-tape-insert-geometry-in-heat-exchanger/deepak-bhoi
CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchang...ijtsrd
The flow properties of heat transfer across such corrugated channels are very distinct from parallel plate channels. The primary flow direction is parallel to the waviness of the channel of the corrugated channel, although the local flow direction is still changed due to the waviness of the channel. By flow recirculation, separation and re attachment, the thermal boundary layer formed on its walls is regularly disrupted and the convective heat transfer coefficient is thus increased. In this work, in corrugated channels, the convective heat transfer and pressure drop characteristics of flow have been tested numerically. On channels of uniform heat flux and fixed corrugation over a Reynolds number spectrum, 10000 = Re = 30000, numerical research was conducted. The impacts of channel configuration, variation in Reynold’s number, and concentration variations of nanoparticles in base fluid on heat transfer are discussed. As opposed to the traditional corrugated channel, a major heat transfer gain was associated with the proposed corrugated channel. Based on the nanofluid concentration, Reynold number and channel configuration of the corrugated channel, the average Nusselt number increased by a factor of 2.2 up to 2.8 compared to that of the semi circular corrugated channel. Compared with the effect of channel configuration variation, triangular corrugated channel was the best Nusselt numbers, followed by the shape Semi circular Triangular , and Semi circular corrugated channel with the lowest results. Prof. Pushparaj Singh | Rishi Kesh Jha "CFD Analysis for Heat Transfer Enhancement of a Corrugated Plate Heat Exchanger using Different Corrugated Channel Configurations" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd35706.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/35706/cfd-analysis-for-heat-transfer-enhancement-of-a-corrugated-plate-heat-exchanger-using-different-corrugated-channel-configurations/prof-pushparaj-singh
THE EFFECT OF GEOMETRICAL PARAMETERS ON HEAT TRANSFER AND HYDRO DYNAMICAL CHA...ijmech
Compact size and high heat transfer coefficient of helical coil heat exchangers causes them to have an
important role in various industrial applications. This paper investigate numerically on the influence of
different parameters such as coil radius, coil pitch and diameter of tube on the hydrodynamic and
heat transfer characteristics of helical double tube heat exchangers using the CFD software which is
based on the principles of heat transfer, fluid mechanics and thermodynamics. The results indicated that
heat transfer augmentation occurs by increasing of the inner Dean Number, inner tube diameter, curvature
ratio and by the reduction of the pitch of heat exchanger coil. By increasing the radius of coils, the
secondary flow effects due to centrifugal forces diminishes and flow of fluid through the coils tends to flow
in a straight path and as a result, the friction coefficient decreases consequently.
Design and Experimental Analysis of Rectangular Wavy Micro Channel Heat sinkAM Publications
An experimental investigation has been explore in order to study the flow of fluid and heat transfer characteristics on a Rectangular Wavy microchannel heat sink. Various applications are envisaged for the use of microchannel heat sink in electrical and electronic power generation and distribution. The Heat sink with microchannel is designed on an Aluminium specimen with Rectangular Wavy configuration with a channel cross section of 1mm x 0.5mm.To improve the heat transfer performance of the cooling system is achieved by using nanoparticles in the fluid passing through the microchannel heat sink. Results are presented by using different concentration (with 1% to 3%) of Nano fluids in water for the heat sink. Various cooling characteristics including thermal resistance, temperature drop and pressure drop across the microchannel heat sink are analysed for different volume concentrations, different volumetric flow rates and Reynolds number. Other significant characteristics for the measurement of heat transfer characteristics across this microchannel heat sink are also analysed and presented in this experiment.
CFD Analysis of Concentric Tube Heat Exchanger Using Twisted TapesIJARIIT
In this paper, the three dimensional CFD modeling studies on heat transfer, friction factor and thermal performance
of concentric tube heat exchanger using twisted tapes (Plain, V-cut, , Jagged V-cut) with different twist ratios (y=2.0, 4.0) are
used. Twisted tapes are used to augment the heat transfer by creating turbulence in the fluid flow. Various methods are applied
to increase thermal performance of heat transfer devices such as treated surfaces, rough surfaces, swirling flow devices, coiled
tubes, and surface tension devices. Out of these twisted tape method is used to increase the thermal performance. Twisted tape
inserts on effectiveness of heat exchanger has analyzed for different Reynolds Number. The maximum thermal performance
factor was obtained by the Jagged V-cut twisted tape (H=50) insert compare to other twisted tapes. Simultaneously the friction
factor has been analyzed
EXPERIMENTAL INVESTIGATION OF FLOW CONDENSATION HEAT TRANSFER IN RECTANGULAR ...IAEME Publication
Condensation heat transfer coefficients and pressure drops in horizontal rectangular minichannel was measured using the specially designed aluminium test section with hydraulic diameter of 2mm. The data are reported for steam is a
refrigerant and water as a coolant. The experimental investigation was carried out mass flux range of 88.89 kg/m2
s to 177.78 kg/m2 s, vapour quality ranges from 20-80% and a saturation temperature of 100°C.
Esign and thermal evaluation of shell and helical coil heat exchangereSAT Journals
Abstract
Heat exchangers are the important engineering equipments used for transferring heat from one fluid to another. Heat exchangers are widely used in various kinds of application such as power plants, nuclear reactors, refrigeration and air-conditioning systems, heat recovery systems, petrochemical, mechanical, biomedical industries. Helical coil heat exchangers are gaining wide importance now-a-days because it can give high heat transfer coefficient in small footprint of surface area. This paper focuses on the designing of shell and helical coil heat exchanger and its thermal evaluation with counter flow configuration. The thermal analysis is carried out considering the various parameters such as flow rate of cold water, flow rate of hot water, temperature, effectiveness and overall heat transfer coefficient.
Keywords— Helical coil heat exchanger, Counter flow, Flow rate, effectiveness, heat transfer coefficient etc.
THE EFFECT OF GEOMETRICAL PARAMETERS ON HEAT TRANSFER AND HYDRO DYNAMICAL CHA...ijmech
Compact size and high heat transfer coefficient of helical coil heat exchangers causes them to have an
important role in various industrial applications. This paper investigate numerically on the influence of
different parameters such as coil radius, coil pitch and diameter of tube on the hydrodynamic and
heat transfer characteristics of helical double tube heat exchangers using the CFD software which is
based on the principles of heat transfer, fluid mechanics and thermodynamics. The results indicated that
heat transfer augmentation occurs by increasing of the inner Dean Number, inner tube diameter, curvature
ratio and by the reduction of the pitch of heat exchanger coil. By increasing the radius of coils, the
secondary flow effects due to centrifugal forces diminishes and flow of fluid through the coils tends to flow
in a straight path and as a result, the friction coefficient decreases consequently.
Design and Experimental Analysis of Rectangular Wavy Micro Channel Heat sinkAM Publications
An experimental investigation has been explore in order to study the flow of fluid and heat transfer characteristics on a Rectangular Wavy microchannel heat sink. Various applications are envisaged for the use of microchannel heat sink in electrical and electronic power generation and distribution. The Heat sink with microchannel is designed on an Aluminium specimen with Rectangular Wavy configuration with a channel cross section of 1mm x 0.5mm.To improve the heat transfer performance of the cooling system is achieved by using nanoparticles in the fluid passing through the microchannel heat sink. Results are presented by using different concentration (with 1% to 3%) of Nano fluids in water for the heat sink. Various cooling characteristics including thermal resistance, temperature drop and pressure drop across the microchannel heat sink are analysed for different volume concentrations, different volumetric flow rates and Reynolds number. Other significant characteristics for the measurement of heat transfer characteristics across this microchannel heat sink are also analysed and presented in this experiment.
CFD Analysis of Concentric Tube Heat Exchanger Using Twisted TapesIJARIIT
In this paper, the three dimensional CFD modeling studies on heat transfer, friction factor and thermal performance
of concentric tube heat exchanger using twisted tapes (Plain, V-cut, , Jagged V-cut) with different twist ratios (y=2.0, 4.0) are
used. Twisted tapes are used to augment the heat transfer by creating turbulence in the fluid flow. Various methods are applied
to increase thermal performance of heat transfer devices such as treated surfaces, rough surfaces, swirling flow devices, coiled
tubes, and surface tension devices. Out of these twisted tape method is used to increase the thermal performance. Twisted tape
inserts on effectiveness of heat exchanger has analyzed for different Reynolds Number. The maximum thermal performance
factor was obtained by the Jagged V-cut twisted tape (H=50) insert compare to other twisted tapes. Simultaneously the friction
factor has been analyzed
EXPERIMENTAL INVESTIGATION OF FLOW CONDENSATION HEAT TRANSFER IN RECTANGULAR ...IAEME Publication
Condensation heat transfer coefficients and pressure drops in horizontal rectangular minichannel was measured using the specially designed aluminium test section with hydraulic diameter of 2mm. The data are reported for steam is a
refrigerant and water as a coolant. The experimental investigation was carried out mass flux range of 88.89 kg/m2
s to 177.78 kg/m2 s, vapour quality ranges from 20-80% and a saturation temperature of 100°C.
Esign and thermal evaluation of shell and helical coil heat exchangereSAT Journals
Abstract
Heat exchangers are the important engineering equipments used for transferring heat from one fluid to another. Heat exchangers are widely used in various kinds of application such as power plants, nuclear reactors, refrigeration and air-conditioning systems, heat recovery systems, petrochemical, mechanical, biomedical industries. Helical coil heat exchangers are gaining wide importance now-a-days because it can give high heat transfer coefficient in small footprint of surface area. This paper focuses on the designing of shell and helical coil heat exchanger and its thermal evaluation with counter flow configuration. The thermal analysis is carried out considering the various parameters such as flow rate of cold water, flow rate of hot water, temperature, effectiveness and overall heat transfer coefficient.
Keywords— Helical coil heat exchanger, Counter flow, Flow rate, effectiveness, heat transfer coefficient etc.
Similar to Computational analysis for different characteristics of the circular microchannel under low Reynolds number fully developed flow conditions (20)
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.