The document discusses coastal landforms and processes. It describes how constructive and destructive waves modify coastlines through erosion and deposition processes. These include hydraulic power, corrosion, abrasion, attrition, and solution. Landforms result from these processes, including wave-cut platforms, cliffs, caves, arches, stacks, beaches, and spits. The document also discusses coastal management strategies to address issues like erosion and tourism, including hard engineering approaches like sea walls and groynes, and soft engineering like beach nourishment and managed retreat.
A2 Geography Revision for Coastal Environments, subchapter 8.4 Sustainable Management of Coasts. It is suitable for Year 13 Geography, Cambridge Examination in November 2016. It contains: key terms and definitions, a topic summary, sketches and descriptions, additional work (6 questions for testing your knowledge) and some suggested websites.
presentation was provided by Prof W.U Chandrasekara
Department of Zoology and Environmental Management
For Coastal and Marine resource management course
A2 Geography Revision for Coastal Environments, subchapter 8.4 Sustainable Management of Coasts. It is suitable for Year 13 Geography, Cambridge Examination in November 2016. It contains: key terms and definitions, a topic summary, sketches and descriptions, additional work (6 questions for testing your knowledge) and some suggested websites.
presentation was provided by Prof W.U Chandrasekara
Department of Zoology and Environmental Management
For Coastal and Marine resource management course
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
1. The Specification
The earth's crust is modified by coastal processes which result in distinctive landforms. Constructive
and destructive waves. Processes of erosion (hydraulic power, corrosion, corrasion; attrition; transport
(traction, saltation, suspension, solution, longshore drift) and deposition. Landforms and characteristic
features and formation of wave cut platforms, cliffs, caves, arches, stacks, beaches, spits in the context
of an example of an erosional coastline and a depositional coastline. Candidates should study two small
stretches of coastline to illustrate erosional and depositional features and processes e.g. a headland as
in the Lulworth Cove area, Marsden Rock, Flamborough Head, Hurst Castle, Spurn Point etc. The use
of photographs and Ordnance Survey maps would prove helpful in this context. Candidates may be
expected to name examples and describe the characteristics of the features and explain their formation
with reference to the appropriate processes that have been at work.
Recognise and describe coastal features on Ordnance Survey maps. The interaction between people and
coastal environments. Coastal management issues, coastal erosion and tourism. The social,
environmental and political problems caused by coastal erosion and tourism e.g. cliff collapse, coastal
flooding, problems of resorts. Students should be aware of small scale exemplars of coastal areas where
management issues occur. Such examples may include the Holderness coast (erosion), a Spanish resort
and Bangladesh (coastal flooding). Students should be aware of the problems caused and their impact
on different groups such as locals, governments and visitors.
The strategies used to solve problems such as coastal defences e.g. groynes, sea walls, extending the
tourist season and providing new facilities. The different values and attitudes of interested groups to
coastal protection strategies and tourist developments and which strategies constitute sustainable
development
Students should be aware of the advantages and
disadvantages of the strategies to different groups
of people such as the impact further along a coast
of building groynes and the possibility of
overcrowding when new facilities are provided.
Mechanical weathering
This is the breakdown of rock without changing its chemical composition. The main type of
mechanical weathering is freeze-thaw weathering:
2. • The temperature alternates above and below 0ºc
• The water flows into cracks in rocks
• When the water freezes, it expands and puts pressure on the rock
• When the water thaws, it contracts, which releases the pressure on the rock
• Repeated freezing and thawing causes the cracks to widen and the rock to break up
Chemical weathering
Chemical weathering is the breakdown of rock by changing its chemical composition.
Waves wear away the coast using four processes of erosion
1) Hydraulic power:
Waves crash against rock and compress the air in the cracks. This
puts pressure on the rock. Repeated compression widens the
cracks and makes bits of rock break off.
2) Abrasion:
Eroded particles in the water scrape and rub against rock,
removing small pieces.
3) Attrition:
Eroded particles in the water smash into each other and break into
smaller fragments. Their edges also get rounded off as they rub
together.
4) Solution:
Seawater dissolves rock like chalk and limestone because it’s a
weak carbonic acid.
Coastal Landforms caused by erosion
Wave cut platforms:
1) Waves cause most erosion at the base of the cliff.
2) This forms a wave cut notch which is enlarged when more erosion takes place.
3) The rock above the notch breaks down and collapses.
4) This broken rock is washed away and another wave cut notch is formed.
5) The collapsing is repeated and this causes the cliff to retreat.
6) A wave cut platform is left behind.
Headlands and Bays:
1) Some types if rock are more resistant to erosion than others.
2) Headlands and bays form where there are alternating bands of resistant and les resistant
rock along the coast.
3) The less resistant rock is eroded quickly and this forms a bay – bays have a gentle slope.
4) The resistant rock is eroded more slowly and it’s left jutting out, forming a headland –
headlands have steep sides.
Coastal Management
3. There are two methods to deal with coastal erosion:
Hard engineering: man-made structures built to control the flow of the sea and reduce flowing and
erosion.
Soft engineering: schemes set up using knowledge of the sea and its processes to reduce the effects of
flooding and erosion.
Stategy What it is Advantages Disadvantages
Prevents It creates a strong
A wall made out erosion of the backwash which
Hard of concrete that coast and acts erodes under the
Sea Wall
Engineering reflects waves as a barrier to wall. Very
back to sea. prevent expensive to build
flooding. and maintain.
The boulders Can be moved by
absorb wave strong waves, and
Boulders that are energy, and so need to be
Rock Armour piled up along the therefore reduce replaced.
coast. erosion and
flooding.
Cheap.
They deprive beach
Groynes create
Wooden/stone further down the
wider beaches
fences that are coast, making the
which slow the
built at right narrower.
waves. This
Groynes angles to the coast. Narrower beaches
gives greater
They trap material don't protect the
protection from
transported by coast as well,
flooding and
longshore drift. leading to grater
erosion. Cheap.
erosion and floods.
Wider beaches Expensive. Has to
created which be repeated.
slow waves.
Soft Beach Sand and shingle
Greater
Engineering nourishment added to beach.
protection from
erosion and
flooding
Dune Creating or Sand dunes Protection is
regeneration restoring sand provide a limited to a small
dunes by barrier between area. Nourishment
nourishment or by land and the is expensive
planting vegetation sea. Wave
to stabilise the energy is
sand. absorbed which
prevents
flooding and
4. erosion.
Stabilisation is
cheap.
The vegetation Marsh creation is
stabilises the useful where
mudflats and erosion rates are
helps to reduce high because the
Planting
the speed of the marsh can't
vegetation in
Marsh creation waves. This establish itself.
mudflats along the
prevents expensive.
coast.
flooding and
erosion. It also
creates new
habitats.
Over time the People may
land will disagree over what
Removing an become land is allowed to
existing defence marshland- flood.
Managed retreat and allowing the creating new
land behind it to habitats.
flood. Flooding and
erosion are
reduced. Cheap.
Waves erode weaknesses in the rock. The greatest line of weakness
creates the largest cave when eroded. The size of the cave increases by further erosion by methods such
as corrosion for example. This continues until the headland is opened on both sides. This creates an
arch. Base erosion at the bottom of the arch causes the roof to collapse, leaving behind a stack, that has
been separated from the mainland.
Waves
waves contribute to the majority of erosion along the coastline. WInd blown across the sea surface
causes small ripples which eventually grow into waves.
When a wave approaches the coast, it slows down due to friction with the sea bed. However, the upper
part of the wave continues to move forward. As the upper part of the wave is unsupported, gravity acts
upon it toppling it over. It then breaks forward against the cliff face or surges up the beach.
Waves which erode the coastline are Destructive Waves.
5. Three features which give destructive waves the qualities enabling it to erode the coastline are:
- They are high in proportion to thier length.
- The backwash is much larger than the swash. This in turn, causes rock. pebbles and sand to be carried
back out to sea.
- They are frequent waves, breaking at an average rate of between eleven and fifteen per minute.
The height and destructiveness is determined by the distance the the wave has travelled and the wind's
velocity. If the waves have been driven by the wind for a prolonged period of time or have travelled
across a large area of ocean, they have had time to grow to thier full height, this means that alot of
energy can be released when the wave breaks against the coastline.
The length of water over which the wind has blown is called the fetch.
In order to get a wave with greater eroding power, a greater fetch and stronger wind is required. Ideal
conditions for the formation of large destructive waves occur occasionally and can be seen in the Case
Study: Cornwall 4th January, 1998. The onshore south-westerly winds were strong with the gusts over
160 km/h and had a long journey over the Atlantic Ocean. This very large fetch and strong wind,
causes a destructive wave, with great potential for coastal erosion.
Transport
Any material of any size, that is eroded along the coastline, is transported by the waves, and is
then deposited further along the coast. More eroded materials are carried by the rivers that feed into the
sea. The sediment that is picked up along the river is then gathered by the waves, and carried along
with the eroded material from the coastline. Larger boulders roll along the sea bed, and then the smaller
boulders bounce along, which is called saltation. Sand particles are carried in suspension, whilst the
limestone and chalk is dissolved in the water, and is also carried off, but this time in solution. This
transportation of materials such as sand, pebbles and boulders along the coast by the waves is called
longshore drift. This occurs as waves have a tendency to approach waves at an angle, but the sand
particles tend to leave the beach at a right angle, due to the fact that it is where the slope has the
steepest gradient. This means that as pebbles are pushed up the beach at an angle, it will always come
back down at a right angle. This means that the material is transported along the coastline.
Around the British Isles, longshore drift is controlled by the direction of whichever wind is
prevailing. If the south-westerly winds are dominant, it causes the drift to move from west to east along
the channel coast, and from south to north on the west coast. The land covers the east coast from the
6. south-westerly winds. On the other hand, northerly winds cross a lot of sea before the reach the coast,
and therefore, despite the fact that winds are less prevalent than the south-westerly winds, they have the
greastest influence on the longshore drift. Longshore drift has great importance over the formation of
all the landforms of coastal deposition.
Deposition
The load of the waves, which are sand, shingle and pebbles, are deposited by constructive waves.
These waves tend to deposit more than they remove in terms of material on the coastline. The main
features that these waves exhibit, and are distinguished by are:
- They are long in proportion to their height.
- They break gently on the beach, which means that the swash is stong in comparison to the backwash.
- They tend to be infrequent waves, with only 6-9 waves per minute.
These waves are tradtionally associated with calm sea conditions, where the winds are light, and are
not blowing directly onto the shore. This means that they occur more frequently in the summer, than in
the winter. Constructive waves occur most effectievly when in a sheltered coastal location, such as a
bay, which is sheltered by rocky headlands on both sides.
Beaches
A beach is the area of gently-sloping land between the high water mark and low water mark. This
means that at high tide, the majority of this land is submerged with water. Physically, beaches can be
straight and stretch along the coast for several miles. Other beaches, such as those found in bays, are
curved.
Beaches are most commonly made up of sand, shingle and pebbles. Many beaches are composed of
whatever is deposited on the shore by the swash of the waves. More deposition can be seen in an area
where the waves have a stronger swash than backwash. However, this deposited material does not stay
for long and is moved along the beach due to longshore drift or carried back out to see by a waves'
backwash. The materials from which a beach is formed are carried by longshore drift.
If a coastline has weak rock, susceptible to erosion, the waves will be heavily laden with material.
Whenever there is a bend in the coastline, it is more likely that deposition, via constructive waves, will
take place as a more sheltered area has been created. More material builds up at this point and this
causes a beach to build up.
Spits
7. A spit is a narrow ridge of sand or shingle
(see picture). One end of
the spit is attached to the land and the other end extends out to sea. In theory all a spit is, is a beach that
extends out to sea rater than being completely attached to the coastline.
If a spit is made from sand, sand dunes are usually produced at the back of it. The area of water
behind this sand is usually muddy and marshland.
Case Studies
Scarborough
8. cliffs, , transport + deposition , formation of
(nikesh)
beaches + spits , case study left to do
(me)