CEMSCREED SL is a unique cementitious self leveling system which will level the surface and increase the look of the surface. CEMSCREED SL can be applied easily on the concrete surface at thickness of 8 to 25mm.
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.
These slides are about a civil engineering term which named as grout. It used as finish material. it is related to civil engineering.
I hope you all like it and it will help you.
Sometimes just telling clients what Triclean can do isn’t enough. We have to show them.
Below are some great examples of the commercial cleaning work Triclean can do for you.
How to determine Initial and Final Setting Time of Cement?Civil Insider
Get PPT here
https://civilinsider.com/initial-and-final-setting-time-of-cement/
During Construction using concrete, cement paste, mortar certain time is required for mixing, transportation, placing, compacting and finishing. During this time concrete, mortar, cement paste should be in plastic condition and should not harden and it is mandatory that one should use the concrete before it starts to loose its plasticity. So How should someone know how long is concrete workable? and How much travel time is permitted for concrete?
Well its Setting time that tells us how long concrete is going to be workable. Now the question is What is Setting Time of Cement?
How to determine Standard consistency of cement?Civil Insider
Get PPT here
https://civilinsider.com/standard-consistency-test-on-cement/
What is Consistency of Cement?
Consistency of Cement is amount of water required to initiate the chemical reaction between cement and water to make the uniform cement paste.
Define Standard Consistency of Cement?
Standard Consistency of Cement is defined as Consistency which will permit Vicat plunger with 10mm diameter and 50mm length to penetrate to a depth of 33-35mm from top of the mould.
Standard Consistency of Cement can also be defined as Consistency of cement which will permit Vicat plunger to penetrate to the point 5-7mm from the bottom of the mould.
Also Standard Consistency means the amount of water required to make Cement Paste Plastic.
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.
These slides are about a civil engineering term which named as grout. It used as finish material. it is related to civil engineering.
I hope you all like it and it will help you.
Sometimes just telling clients what Triclean can do isn’t enough. We have to show them.
Below are some great examples of the commercial cleaning work Triclean can do for you.
How to determine Initial and Final Setting Time of Cement?Civil Insider
Get PPT here
https://civilinsider.com/initial-and-final-setting-time-of-cement/
During Construction using concrete, cement paste, mortar certain time is required for mixing, transportation, placing, compacting and finishing. During this time concrete, mortar, cement paste should be in plastic condition and should not harden and it is mandatory that one should use the concrete before it starts to loose its plasticity. So How should someone know how long is concrete workable? and How much travel time is permitted for concrete?
Well its Setting time that tells us how long concrete is going to be workable. Now the question is What is Setting Time of Cement?
How to determine Standard consistency of cement?Civil Insider
Get PPT here
https://civilinsider.com/standard-consistency-test-on-cement/
What is Consistency of Cement?
Consistency of Cement is amount of water required to initiate the chemical reaction between cement and water to make the uniform cement paste.
Define Standard Consistency of Cement?
Standard Consistency of Cement is defined as Consistency which will permit Vicat plunger with 10mm diameter and 50mm length to penetrate to a depth of 33-35mm from top of the mould.
Standard Consistency of Cement can also be defined as Consistency of cement which will permit Vicat plunger to penetrate to the point 5-7mm from the bottom of the mould.
Also Standard Consistency means the amount of water required to make Cement Paste Plastic.
Reusing of glass powder and industrial waste materials in concreteeSAT Journals
Abstract A huge amount of concrete is consumed in the construction work. A good quality concrete is mixing of cement, fine and coarse aggregates, water and admixtures as needed to obtain an optimum quality and economy. In this study investigation were carried out on compressive strength, split tensile strength and water absorption of M-40 grade of concrete mixes with 20% constant replacement of waste glass powder in cement and partial replacement of waste foundry sand in fine aggregate. From the test results, strength are achieved very less on 7th and 14th das but it increases on the 28thday. High strength values found at 40% replacement level in strength parameters. Keywords: waste glass powder, waste foundry sand, eco-friendly, concrete mix.
RS-FLOOR CT is a lithium-based liquid designed for durable, transparent colouring of concrete surfaces.
Product description: Working principle of DRS-FLOOR CT is based on chemical interaction of
Lithium silicate with calcium hydroxide, which is available in concrete as a lime. The product of the reaction - calcium hydro-silicate - is the main bonding material in concrete. DRS-FLOOR CT paints the top layer of the concrete surface by the reaction.
Chemshun ceramic Alumina grinding balls media for
miming is small size ceramic balls or Alumina ceramic
beads , used in high intensity stirred mills for fine and
ultra fine grinding
Hello, My name is Saidul Islam. I am a student of Stamford University Bangladesh. It is my varsity presentration. Here halp our course teacher , so I made it too largest. Here you got details in concrete. we are finish those work.
CEMSCREED FAIRING COAT is a single component acrylic polymer modified repair mortar for use as a "Fairing Coat”. When mixed with water, as directed, a fine grey trowellable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface. CEMSCREED FAIRING COAT is specially formulated to produce a shrinkage compensating mortar with no cracking when applied in a thin section. Adhesion to concrete and flexibility are excellent.
CEMSCREED R is a prepacked two component system consisting of ready to use polymer modified mortar and polymer modified primer. The mortar contains specially processed cement and polymer with graded fillers and additives to impart adhesion, strength and weather resistance. CEMSCREED R is designed for cost effective repairs to spalled or damaged concrete and floors. CEMSCREED R is ready to use for easy on-site mixing. The mortar can be laid in thickness of 10-20 mm in single application and exhibits good workability and finishing properties. CEMSCREED R has excellent adhesion to substrate and exhibits excellent bond & weather resistance thus leading to increased durability and also resists shrinkage induced cracking.
Reusing of glass powder and industrial waste materials in concreteeSAT Journals
Abstract A huge amount of concrete is consumed in the construction work. A good quality concrete is mixing of cement, fine and coarse aggregates, water and admixtures as needed to obtain an optimum quality and economy. In this study investigation were carried out on compressive strength, split tensile strength and water absorption of M-40 grade of concrete mixes with 20% constant replacement of waste glass powder in cement and partial replacement of waste foundry sand in fine aggregate. From the test results, strength are achieved very less on 7th and 14th das but it increases on the 28thday. High strength values found at 40% replacement level in strength parameters. Keywords: waste glass powder, waste foundry sand, eco-friendly, concrete mix.
RS-FLOOR CT is a lithium-based liquid designed for durable, transparent colouring of concrete surfaces.
Product description: Working principle of DRS-FLOOR CT is based on chemical interaction of
Lithium silicate with calcium hydroxide, which is available in concrete as a lime. The product of the reaction - calcium hydro-silicate - is the main bonding material in concrete. DRS-FLOOR CT paints the top layer of the concrete surface by the reaction.
Chemshun ceramic Alumina grinding balls media for
miming is small size ceramic balls or Alumina ceramic
beads , used in high intensity stirred mills for fine and
ultra fine grinding
Hello, My name is Saidul Islam. I am a student of Stamford University Bangladesh. It is my varsity presentration. Here halp our course teacher , so I made it too largest. Here you got details in concrete. we are finish those work.
CEMSCREED FAIRING COAT is a single component acrylic polymer modified repair mortar for use as a "Fairing Coat”. When mixed with water, as directed, a fine grey trowellable mortar results which can readily be applied to fill in pores, blowholes and blemishes on a concrete surface. CEMSCREED FAIRING COAT is specially formulated to produce a shrinkage compensating mortar with no cracking when applied in a thin section. Adhesion to concrete and flexibility are excellent.
CEMSCREED R is a prepacked two component system consisting of ready to use polymer modified mortar and polymer modified primer. The mortar contains specially processed cement and polymer with graded fillers and additives to impart adhesion, strength and weather resistance. CEMSCREED R is designed for cost effective repairs to spalled or damaged concrete and floors. CEMSCREED R is ready to use for easy on-site mixing. The mortar can be laid in thickness of 10-20 mm in single application and exhibits good workability and finishing properties. CEMSCREED R has excellent adhesion to substrate and exhibits excellent bond & weather resistance thus leading to increased durability and also resists shrinkage induced cracking.
Fastline Services is your one-stop-shop for line marking and safety solutions for warehousing and logistics. See the services we offer in our brochure.
CEMSCREED FAST REPAIR SPECIAL is a ready to use cement based single component shotcrete mortar modified with micro silica. The formulation is designed to match the requirements for a dry process shotcrete applied mortar. It gives high early strength, reduced rebound and maximum application thickness, coupled with resistivity values commensurate with accepted criteria for cathodic protection overlays.
CRACKSEAL HC is a cementitious crack sealing material in powder form. It is easy to apply. It sets quickly on application and can be over coated with common paints / coatings.
WATERGUARD CL is a brush applied coal tar based high performance waterproof coating for cementitious surfaces.
Single pack
Economical
Easy to apply
Excellent Chemical Resistance
Good water proofing Characteristics
Good adhesion on cementitious substrate.
Flexible
Set up and commissioned in 2009, Exeed Premium Dry Mortar manufactures and delivers construction chemicals and mortars of International standards to the GCC market. Our state of the art production facility is located in the Industrial City of Abu Dhabi (ICAD2), covering a total area of 28,000 sq.m.
FLOWGROUT 60 (M) is a single pack, ultra high strength, free flowing, non-shrink grout. FLOWGROUT 60 (M) is a blend of specially processed cement and special fillers, free from corrosive substances and additives. FLOWGROUT 60 (M) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (M) is suitable for gap widths between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (M) resin grout can be used (see separate data sheet for more information) for thickness in excess of 50mm.
FLOWGROUT 60 (S) is based on specially processed cement containing fillers and additives. FLOWGROUT 60 (S) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (S) is suitable for gap widths of between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (S) can be used (see separate data sheet for more information) for thickness in excess fo 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used.
FLOWGROUT 60 is a single pack ready to use, ultra high strength, free flowing, non shrink grout. FLOWGROUT 60 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS:1881 Part-116, 1983, BS:4551, 1980 and ASTM C 469-83, ASTM C 940.
FLOWGROUT AG is a high strength, super flowing, large section cementitious grout. It is a blend of specially selected cement, silica, aggregates and additives, when mixed with water. It produces a consistent, reliable, non-shrink, ultra high strength large section grout.
FLOWGROUT AG complies to BS 6319 : Part-2 and ASTM C 157-93.
A Single pack ready to use, high strength, free flowing, non shrink grout. FLOWGROUT 40 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS : 1881 Part-116, 1983, BS : 4551 : 1980 and ASTM C 469-83, ASTM C 940.
FAIRGROUT is a two pack high strength, non-shrink polymer cementitious grout with both high early and ultimate strengths. FAIRGROUT has excellent flow properties and will not shrink after placing. FAIRGROUT is free from corrosive substances. FAIRGROUT is suitable for use in gap width of between 10-50 mm. In order to achieve optimum quality exposed FAIRGROUT and the outer surface of any shuttering should be protected from weather conditions for at least 12 hours. Sacks, matting, plastic sheets etc. should be placed as protection immediately after placing the grout.
FAIRADD is a plasticising, shrinkage compensating grout additive. FAIRADD is a single pack powdered admixture which when added to cement (cement : sand) produces an easy flow, high strength, shrinkage compensating grout. It is ideally suited for grouting and in-filling where a non-shrink, free-flowing product is required. FAIRADD imparts super-plasticising / high water reducing properties as well as positive expansion.
FAIRADD S is a combination of an expanding and plasticising agent. The expanding agent, generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. The plasticising agent enables high workability mixes to be produced with relatively low water/cement ratio. Stability and cohesion of the grout is greatly increased. The expansion is controlled to avoid excess built up that is sufficient to provide high bonding of the grout to the contact surfaces with the absence of voids.
It confirming to BS 8110 Part-1 : 1985, Section 8.9.4.6.
FAIRADD CG is supplied as a dry powder requiring only the addition of a controlled amount of clean water and cement to produce a free flowing non shrink grout. FAIRADD CG is an all fines admixture containing expansive cement which impart controlled expansion in the plastic state whilst minimizing water demand. The material is designed to allow uniform mixing, and eliminates unwanted segregation and bleeding.
FAIRADD CG complies to BS 1881 : Part-116, 1983 and ASTM C 827-87, ASTM C 1107 Grade C.
ANCHORGROUT can be used for high strength corrosion resistant, anchoring of bolts and a permanent installation of reinforcement doweling and starter bars, foundation bolts, base plates, hand rails, safety fences, wall tiles, railway tracks, tie back anchors and grout for tower cranes.
Due to its thixotropic nature, ANCHORGROUT can be used in vertical, horizontal and overhead situations where the hole diameter exceeds the bar diameter by not less than 4 mm and not more than 25 mm.
Where it is necessary to obtain a quick high strength fixing into concrete, brick, masonry, block-work, rock or other material of sufficient strength to take the load required of the fixing. ANCHORFIX CAPSULE can be fixed into horizontal and vertical surfaces, or overhead.
FAIRSCREED R is used to repair spalled columns, soffits, gutters, lintels etc.
It is also used for repairing of damaged concrete floors, spalled concrete roads and runways.
Used to repair damaged concrete kerbs, pipes and precast units, as a bedding mortar for tiles on uneven floors or under corrosive conditions.
FAIRSCREED PR is the name given to a range of polyester based products which will fulfill many specialist applications in the jointing, patching and repair fields of the building and civil engineering industries.
The mixing of resin and hardener starts a polymerisation process resulting in excellent mechanical properties like high compressive strength, high flexural strength, high tensile strength, corrosion resistance of cured material. The unique hardner system in the FAIRSCREED PR range enables the mix to be varied from a pourable consistency to a trowelable mortar without significantly affecting the setting times or strengths achieved. Being polyester-based, selected grades of FAIRSCREED PR will harden and cure at temperatures down to freezing point.
This wide tolerance in use makes FAIRSCREED PR almost fullproof, and because part packs and extra aggregate can be used, the material is very economical.
FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel applied, four component Methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
FAIRMATE SILENT BREAK HSCA is a noncombustible and non-explosive material. It is safe and convenient in transportation, storage and operation. FAIRMATE SILENT BREAK HSCA is a silent demolition agent which does not cause any Vibration, noise, flying rocks, ash and hazardous gas during demolition. Demolition and cutting are allowed to be used according to working scheme. FAIRMATE SILENT BREAK HSCA can gain a high yield for mining of granite, marble etc. It is very easy to crush & remain reinforced concrete structures on demand during demolition.
FAIRMATE CARBON WRAP is based on new technology designed to completely guarantee the original structure's performance by increasing the strength, durability and vibration resistance. FAIRMATE CARBON WRAP is applied to deteriorated concrete areas on horizontally and vertically.
FAIRCRETE SBR is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE SBR(S) is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRCRETE SB complies to BS 6319.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
All Trophies at Trophy-World Malaysia | Custom Trophies & Plaques Supplier. Come to our Trophy Shop today and check out all our variety of Trophies available. We have the widest range of Trophies in Malaysia. Our team is always ready to greet your needs and discuss with you on your custom Trophy for your event. Rest assured, you will be with the best Trophy Supplier in Malaysia. The official Trophy Malaysia. Thank you for your support.
Stay updated on Siddhivinayak Temple events and timings in Houston, TX. Join our spiritual and community gatherings. Visit us now! gaurisiddhivinayak.org
Emmanuel Katto Uganda - A PhilanthropistMarina Costa
Emmanuel Katto is a well-known businessman from Uganda who is improving his town via his charitable work and commercial endeavors. The Emka Foundation is a non-profit organization that focuses on empowering adolescents through education, business, and skill development. He is the founder and CEO of this organization. His philanthropic journey is deeply personal, driven by a calling to make a positive difference in his home country. Check out the slides to more about his social work.
Solar power panels, also known as photovoltaic (PV) panels, convert sunlight into electricity, offering a renewable and sustainable energy solution. Composed of semiconductor materials, typically silicon, these panels absorb photons from sunlight, generating an electric current through the photovoltaic effect. This clean energy source reduces dependence on fossil fuels, mitigates greenhouse gas emissions, and contributes to environmental sustainability.
Job Vacancies in Norway 🇳🇴
Warehouse Workers for Clothing
2year WORKPERMIT 👍
Salary: €3900-4300 per month (Paid twice a month).
Requirements:
* Duties include quality control of products, order picking, packing goods, and applying stickers and labels.
* Work schedule: 8-10 hours per day, 5 days a week.
Documents 📄
*Adhar
Pan
Photo
Education documents
Basic English**o
Education documents
Basic English**
Photo
Education documents
Basic English**
Gujar Industries India Pvt. Ltd is a leading manufacturer of X-ray baggage scanners in India. With a strong focus on innovation and quality, the company has established itself as a trusted provider of security solutions for various industries. Their X-ray baggage scanners are designed to meet the highest standards of safety and efficiency, making them ideal for use in airports, government buildings, and other high-security environments. Gujar Industries India Pvt. Ltd is committed to providing cutting-edge technology and reliable products to ensure the safety and security of their customers.
Sustainable Solutions for Chemical Waste Disposal by Summerland Environmental...Summerland Environmental
Welcome to the presentation on Sustainable Solutions for Chemical Waste Disposal by Summerland Environmental. We will explore innovative methods and technologies for eco-friendly waste management.
Bridging the Language Gap The Power of Simultaneous Interpretation in RwandaKasuku Translation Ltd
Rwanda is a nation on the rise, fostering international partnerships and economic growth. With this progress comes a growing need for seamless communication across languages. Simultaneous interpretation emerges as a vital tool in this ever-evolving landscape. When seeking the best simultaneous interpretation in Rwanda, Kasuku Translation stands out as a premier choice.
Best steel industrial company LLC in UAEalafnanmetals
AL Afnan Steel Industrial Company LLC is a distinguished steel manufacturer and supplier, celebrated for its high-quality products and outstanding customer service. With a diverse portfolio that includes structural steel, and custom fabrications, AL Afnan meets a wide array of industrial demands. We are dedicated to using advanced technologies and sustainable methods to ensure excellence and reliability in every product, serving both local and international markets with efficiency.
This PDF offers clear and concise instructions on wearing and placing medals and ribbons on U.S. Coast Guard uniforms. It provides detailed guidelines to ensure adherence to official standards, helping service members maintain a professional and regulation-compliant appearance. Perfect for quick reference, this guide is an essential resource for all Coast Guard personnel.
Citizen Air Conditioning Services has offered its services to residential and commercial customers, including air conditioning systems inspections and repairs, boiler installations, mini-split systems, and other cost-effective heating solutions by factory-trained technicians. Other services offered include installation of indoor and outdoor fireplaces, patio and pool heaters, outside gaslighting and BBQs, as well as water system and plumbing services.
Merchants from high-risk industries face significant challenges due to their industry reputation, chargeback, and refund rates. These industries include sectors like gambling, adult entertainment, and CBD products, which often struggle to secure merchant accounts due to increased risks of chargebacks and fraud.
To overcome these difficulties, it is necessary to improve credit scores, reduce chargeback rates, and provide detailed business information to high-risk merchant account providers to enhance credibility.
Regarding security, implementing robust security measures such as secure payment gateways, two-factor authentication, and fraud detection software that utilizes machine learning systems is crucial.
eBrand Promotion Full Service Digital Agency Company ProfileChimaOrjiOkpi
eBrandpromotion.com is Nigeria’s leading Web Design/development and Digital marketing agency. We’ve helped 600+ clients in 24 countries achieve growth revenue of over $160+ Million USD in 12 Years. Whether you’re a Startup or the Unicorn in your industry, we can help your business/organization grow online. Thinking of taking your business online with a professionally designed world-class website or mobile application? At eBrand, we don’t just design beautiful mobile responsive websites/apps, we can guarantee that you will get tangible results or we refund your money…
Office Business Furnishings | Office EquipmentOFWD
OFWD is Edmonton’s Newest and most cost-effective source for Office Furnishings. Conveniently located on 170 street and 114 Avenue in Edmonton’s West End. We take pride in servicing a client base of over 500 corporations throughout the Edmonton and Alberta area. OFWD is in the business of satisfying the home or corporate office environment needs of our clients, from individual pieces of furniture for the home user to the implementation of complete turn-key projects on much larger scales. We supply only quality products from reputable manufacturers. It is our intention to continue to earn the trust of our clients by dealing with honesty and integrity and by providing service and after sales follow-up second to none.
Optimize your online presence as an interior designer in Delhi with tailored SEO strategies. Elevate visibility on search engines, ensuring your design prowess reaches the right audience. Craft engaging content that resonates with local clientele, incorporating relevant keywords and metadata. Harness the power of local SEO techniques to dominate search results, driving organic traffic and inquiries. Stay ahead in Delhi's competitive market by fine-tuning your digital footprint with effective SEO practices.
Comprehensive Water Damage Restoration Serviceskleenupdisaster
Find out how Disaster Kleenup's professional water damage restoration services can quickly and efficiently restore your property. Find more about our advanced techniques and quick action plans. Visit here: https://iddk.com/disaster-cleanup-services/flood-damage/
2. Benefits
Hardwearing
Easy to apply
Cost effective level the surface
Excellent adhesions on the surface
Seamless.
Develops high bond strength.
3. Uses
CEMSCREED SL suitable for damaged floor, Industrial floor, laboratory
pharmaceutical and under layouts.
4. Description
CEMSCREED SL is a unique cementitious self leveling system which will level the
surface and increase the look of the surface. CEMSCREED SL can be applied
easily on the concrete surface at thickness of 8 to 25mm.
5. Properties
Colour : Cement grey, Red
Pot Life : 25 minutes
Compresive Strength : 50 N/mm2 at 28 days
Water/powder Ratio : 0.18