BUOYANCY
•Download as PPT, PDF•
1 like•687 views
Buoyancy is the upward force exerted by a fluid that opposes the weight of an immersed object. The pressure of the fluid increases with depth, creating a greater force pushing up on objects lower in the fluid. The buoyant force can be measured by subtracting the weight of an object in water from its weight in air, and is equal to the weight of the fluid displaced by the object.
Report
Share
Report
Share
Recommended
Buoyancy.ppt
Buoyancy and pressure in fluids are discussed. Objects experience an upward buoyant force when submerged in fluids due to higher pressure at deeper levels pushing up on the bottom of the object. Archimedes' principle states that the buoyant force equals the weight of fluid displaced by the object. The buoyant force can be calculated by subtracting the weight of the object in water from its weight in air.
Buoyancy
Buoyancy is the decrease in weight felt by an object when submerged in a fluid, caused by the upward buoyant force of the fluid. The buoyant force is equal to the weight of fluid displaced by the object. An object will float if its density is less than the fluid's density, sink if greater, and be neutrally buoyant if equal, neither floating nor sinking. Archimedes' principle states the buoyant force is equal to the weight of fluid displaced.
Archimedes' principle
Archimedes was born in 287 BC in Syracuse, Greece. He died in 212 BC when he was killed by a Roman soldier who did not know his identity. Archimedes' father was named Phidias and may have been related to Hieron II, the king of Syracuse. Archimedes' Principle states that when a body is immersed partially or fully in a fluid, it experiences an upward force equal to the weight of the fluid displaced by the body. This upward force is called the buoyant force. The buoyant force depends on the volume of the body immersed and the density of the fluid. An experiment is described to verify Archimedes' Principle by measuring the loss in weight of a
4 Pius Augustine Density and Relative Density
This document contains an appeal to contribute to the Prime Minister's or Chief Minister's fund to help fight COVID-19. It discusses density and relative density, providing definitions and examples. It also contains slides on experiments and calculations related to determining density and relative density using Archimedes' principle and other methods. Key terms like density, specific gravity, pyknometer are discussed in detail with examples.
Buoyancy and Archimedes’ Princple
1) The document discusses Archimedes' principle and buoyancy. It provides examples measuring the weight and buoyant force of objects in air and water.
2) Archimedes' principle states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid the object displaces.
3) The document uses examples to demonstrate how to calculate buoyant force and determine if an object will float or sink based on its density compared to the fluid.
Archimede's Principle
This document discusses Archimedes' principle, which states that the upward force exerted on an object immersed in a fluid is equal to the weight of the fluid it displaces. It explains that whether an object floats or sinks depends on if the weight of the fluid it displaces is equal to or greater than the object's own weight. Examples are given of how ships and submarines use Archimedes' principle to float and control their depth in water.
Pressure and buoyancy
Liquids and gases can exert pressure as forces. Pressure is defined as the force per unit area applied on a surface. Pressure increases with depth in a fluid and depends only on the height of the fluid. Archimedes' principle states that the buoyant force on an object equals the weight of the fluid displaced. An object will float if its density is less than the fluid it displaces, causing an upward buoyant force greater than its weight.
Momentum
Momentum is a quantity that expresses the motion of a body, equal to the product of its mass and velocity. The momentum of an object depends on its mass and velocity, with greater mass or velocity resulting in more momentum. The law of conservation of momentum states that in a closed system without external forces, the total momentum before and after an interaction will be the same. Examples include a person recoiling after firing a gun or moving backward when throwing an object off a skateboard. In collisions, the total momentum of the system is conserved and can be expressed mathematically as the sum of the momentum of the objects before equalling the sum after.
Recommended
Buoyancy.ppt
Buoyancy and pressure in fluids are discussed. Objects experience an upward buoyant force when submerged in fluids due to higher pressure at deeper levels pushing up on the bottom of the object. Archimedes' principle states that the buoyant force equals the weight of fluid displaced by the object. The buoyant force can be calculated by subtracting the weight of the object in water from its weight in air.
Buoyancy
Buoyancy is the decrease in weight felt by an object when submerged in a fluid, caused by the upward buoyant force of the fluid. The buoyant force is equal to the weight of fluid displaced by the object. An object will float if its density is less than the fluid's density, sink if greater, and be neutrally buoyant if equal, neither floating nor sinking. Archimedes' principle states the buoyant force is equal to the weight of fluid displaced.
Archimedes' principle
Archimedes was born in 287 BC in Syracuse, Greece. He died in 212 BC when he was killed by a Roman soldier who did not know his identity. Archimedes' father was named Phidias and may have been related to Hieron II, the king of Syracuse. Archimedes' Principle states that when a body is immersed partially or fully in a fluid, it experiences an upward force equal to the weight of the fluid displaced by the body. This upward force is called the buoyant force. The buoyant force depends on the volume of the body immersed and the density of the fluid. An experiment is described to verify Archimedes' Principle by measuring the loss in weight of a
4 Pius Augustine Density and Relative Density
This document contains an appeal to contribute to the Prime Minister's or Chief Minister's fund to help fight COVID-19. It discusses density and relative density, providing definitions and examples. It also contains slides on experiments and calculations related to determining density and relative density using Archimedes' principle and other methods. Key terms like density, specific gravity, pyknometer are discussed in detail with examples.
Buoyancy and Archimedes’ Princple
1) The document discusses Archimedes' principle and buoyancy. It provides examples measuring the weight and buoyant force of objects in air and water.
2) Archimedes' principle states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid the object displaces.
3) The document uses examples to demonstrate how to calculate buoyant force and determine if an object will float or sink based on its density compared to the fluid.
Archimede's Principle
This document discusses Archimedes' principle, which states that the upward force exerted on an object immersed in a fluid is equal to the weight of the fluid it displaces. It explains that whether an object floats or sinks depends on if the weight of the fluid it displaces is equal to or greater than the object's own weight. Examples are given of how ships and submarines use Archimedes' principle to float and control their depth in water.
Pressure and buoyancy
Liquids and gases can exert pressure as forces. Pressure is defined as the force per unit area applied on a surface. Pressure increases with depth in a fluid and depends only on the height of the fluid. Archimedes' principle states that the buoyant force on an object equals the weight of the fluid displaced. An object will float if its density is less than the fluid it displaces, causing an upward buoyant force greater than its weight.
Momentum
Momentum is a quantity that expresses the motion of a body, equal to the product of its mass and velocity. The momentum of an object depends on its mass and velocity, with greater mass or velocity resulting in more momentum. The law of conservation of momentum states that in a closed system without external forces, the total momentum before and after an interaction will be the same. Examples include a person recoiling after firing a gun or moving backward when throwing an object off a skateboard. In collisions, the total momentum of the system is conserved and can be expressed mathematically as the sum of the momentum of the objects before equalling the sum after.
Archimedes principle
Archimedes' principle states that the buoyant force on an object submerged or partially submerged in a fluid is equal to the weight of the fluid the object displaces. This principle can be used to calculate density and relative density. It also explains why ships and submarines float or sink depending on whether the object's density is greater than, equal to, or less than the fluid it is placed in. Applications of Archimedes' principle include ship building, submarine operations, and how certain aquatic animals and balloons are able to achieve buoyancy.
Density and buoyancy 8.13 final
This document discusses density and buoyancy. It defines density as mass per unit volume and explains that density determines if a substance will float or sink in water. A substance with a density greater than water (1 g/cm3) will sink, while one with a lower density will float. Buoyancy is described as the upward force exerted by fluids on submerged objects. Archimedes' principle states that the buoyant force equals the weight of the fluid displaced by the submerged object. Examples are given to illustrate these concepts.
Mechanics
This document defines and provides examples of different types of physical quantities including scalar and vector quantities. It discusses the definitions of displacement, velocity, and acceleration which are vector quantities measured in meters, meters/second, and meters/second squared respectively. Several example problems are provided calculating initial and final velocities and distances given values for initial velocity, acceleration, and time. The document also defines gravity as 9.8 meters/second squared and notes this acceleration can be used when objects fall vertically from rest.
Archimedes principle
Archimedes' Principle states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid displaced by the object. This principle explains why objects float or sink based on an object's density compared to the fluid. It also explains why objects seem lighter when submerged. Applications of Archimedes' Principle include determining the depth ships sit in water based on water temperature and density, how hot air balloons rise and fall, and how submarines control their buoyancy using ballast tanks.
Upthrust
Upthrust is a force that exists in liquids like water and pushes objects upward against gravity. It is why boats and other objects float, as the upthrust from the water balances out the downward force of gravity. The shape and size of an object affects how much upthrust it receives, with larger, flatter surfaces receiving more upthrust. This explains why people and objects are buoyant and float in water.
Laws of Motion
Newton's three laws of motion are summarized as follows: (1) The law of inertia states that an object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force. It describes an object's resistance to changes in motion known as inertia. (2) The law of acceleration, F=ma, asserts that a net force causes an object's acceleration and acceleration is produced when a force acts on a mass. (3) The law of interaction explains that for every action there is an equal and opposite reaction between two objects.
Friction
Friction is a force that opposes the relative motion between two objects in contact. There are two main types of friction: static friction and kinetic friction. Friction can be both helpful and harmful. It allows for walking and braking a bicycle but also causes wear and tear over time. Friction depends on factors like the roughness and weight of surfaces, and it can be increased or decreased through these surface properties.
Archimedes principle
Archimedes' principle states that when an object is fully or partially submerged in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. This principle explains why objects float or sink based on their density. If an object's density is greater than the fluid, it will sink, and if its density is less than the fluid, it will float. The upthrust force reduces the apparent weight of the submerged object. Applications of Archimedes' principle include determining ship drafts, submarine depths, and fluid densities using instruments like hydrometers.
Buoyant force & archimedes principle
This presentation is about the Buoyant force & Archimedes Principle . It gives a clear and brought idea about the principle of Archimedes
upthrust.pptx
This document discusses upthrust, Archimedes' principle, and floatation. It defines upthrust as the upward force exerted on a body submerged in a fluid. According to Archimedes' principle, the upthrust on a body is equal to the weight of the fluid it displaces. The principle of floatation states that an object floats when the upthrust equals its weight, and sinks when the upthrust is less than its weight. Applications of these principles include why ships and nails float or sink, and the purpose of the Plimsoll line marked on ship hulls.
Momentum
Momentum is a characteristic of moving objects related to its mass and velocity. It is calculated by multiplying mass and velocity, with units of kg*m/s. An object's momentum is in the direction of its velocity, and greater momentum means it is harder to stop the object. Both greater mass and velocity result in higher momentum. The total momentum in a system is conserved during interactions and collisions according to the law of conservation of momentum.
Power point presentation on kinetic energy and potential energy
The document discusses different types of energy. It defines energy as the ability to do work and notes that it can never be created or destroyed, only transferred or stored. It then categorizes all energy as either potential energy, stored in an object, or kinetic energy, the energy of motion. Specific types of potential energy discussed include gravitational, elastic, and chemical potential energy.
Density Ppt
Density is a measurement of how tightly matter is packed together in an object. It is calculated by dividing an object's mass by its volume. Ice floats in water because it has a lower density than water - ice has a density of about 0.9 g/cm3 while water has a density of 1 g/cm3. Hot air balloons and magma rise because they have lower densities than the surrounding air and rock, respectively. A ship will float if its overall density is less than that of water, which is 1 g/cm3.
Archimedes principle
The document discusses buoyancy and how objects float or sink in water. It states that an object's apparent weight is less than its actual weight when submerged due to buoyant force. Buoyant force equals the weight of fluid displaced and is equal to the actual weight minus the apparent weight. A boat made of steel floats because its large size and hollow shape displace a large volume of water, creating enough buoyant force to support the boat's weight, while a solid steel block sinks because it only displaces a small volume of water, resulting in insufficient buoyant force.
Momentum & Energy
The document discusses momentum, energy, and collisions. It defines momentum as mass times velocity and describes momentum as a vector quantity. It explains that momentum is conserved during collisions and distinguishes between external and internal forces. It also defines different types of collisions, such as elastic and inelastic collisions. The document discusses different forms of energy, including kinetic energy and potential energy. It relates force to changes in momentum using impulse.
Floating & Sinking
Floating & Sinking, buoyant forces, displacement, density, volume, mass. All explained thoroughly and simplified for ESL learners at International Schools. Question slides refer to the book Interactive Physical Science.
Upthrust
Sacred Heart School student Sumer Sikri presents to Rohan Jain on upthrust and Archimedes. Upthrust is the upward force that objects experience when submerged in fluids, and depends on the object's surface area and shape. Archimedes discovered that upthrust equals the weight of the fluid displaced by the object. He developed Archimedes' principle, which explains that immersed objects experience an upward buoyant force equal to the weight of the fluid they displace.
Force and motion remind (2)
Newton's three laws of motion describe the relationship between forces and motion:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force.
3) For every action, there is an equal and opposite reaction.
Buoyancy & floatation
1) Buoyancy is the upward force exerted by a fluid that opposes the weight of an immersed object. This force is equal to the weight of the fluid displaced by the object and allows objects with lower density than the fluid to float.
2) The key factors that determine if an object will float or sink are the density of the object compared to the fluid density, the weight of fluid displaced versus the object's weight, and the object's shape.
3) Stability of floating objects depends on the location of the meta-center point, which is where the line of buoyancy force meets the axis when tilted. Stable equilibrium requires the meta-center to be above the center of gravity
Circular Motion
The document discusses circular motion and Newton's laws of motion. It covers topics like circular motion in horizontal circles, vertical circular motion using a bucket of water as an example, and loop the loops. Newton's laws state that an object will remain at rest or in uniform motion unless acted on by an external force, acceleration is proportional to force, and for every action there is an equal and opposite reaction. Circular motion concepts like centripetal force, acceleration, and how tension provides the centripetal force in different situations are also examined.
Ppt on nationalism in india...
The non-cooperation movement and subsequent civil disobedience movements in the 1920s-1930s saw participation from many social groups in India. However, their interpretations of "swaraj" or self-rule differed based on their interests. For example, farmers fought high tax revenues while industrial workers remained distant. The movements also faced limitations as not all communities, such as Dalits led by Ambedkar, felt their issues were addressed. Ultimately, the movements helped foster a sense of collective Indian identity and nationalism through united struggle against British rule.
Ppt on equations of motion by graphival method made by mudit gupta
This document presents the three equations of motion: 1) acceleration equals change in velocity over time, 2) distance equals initial velocity times time plus half acceleration times time squared, and 3) change in velocity squared equals two times acceleration times change in distance. Graphs are used to derive the equations. A video demonstrates all three equations of motion and the document concludes by recapping the three equations learned through a graphical approach.
More Related Content
What's hot
Archimedes principle
Archimedes' principle states that the buoyant force on an object submerged or partially submerged in a fluid is equal to the weight of the fluid the object displaces. This principle can be used to calculate density and relative density. It also explains why ships and submarines float or sink depending on whether the object's density is greater than, equal to, or less than the fluid it is placed in. Applications of Archimedes' principle include ship building, submarine operations, and how certain aquatic animals and balloons are able to achieve buoyancy.
Density and buoyancy 8.13 final
This document discusses density and buoyancy. It defines density as mass per unit volume and explains that density determines if a substance will float or sink in water. A substance with a density greater than water (1 g/cm3) will sink, while one with a lower density will float. Buoyancy is described as the upward force exerted by fluids on submerged objects. Archimedes' principle states that the buoyant force equals the weight of the fluid displaced by the submerged object. Examples are given to illustrate these concepts.
Mechanics
This document defines and provides examples of different types of physical quantities including scalar and vector quantities. It discusses the definitions of displacement, velocity, and acceleration which are vector quantities measured in meters, meters/second, and meters/second squared respectively. Several example problems are provided calculating initial and final velocities and distances given values for initial velocity, acceleration, and time. The document also defines gravity as 9.8 meters/second squared and notes this acceleration can be used when objects fall vertically from rest.
Archimedes principle
Archimedes' Principle states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid displaced by the object. This principle explains why objects float or sink based on an object's density compared to the fluid. It also explains why objects seem lighter when submerged. Applications of Archimedes' Principle include determining the depth ships sit in water based on water temperature and density, how hot air balloons rise and fall, and how submarines control their buoyancy using ballast tanks.
Upthrust
Upthrust is a force that exists in liquids like water and pushes objects upward against gravity. It is why boats and other objects float, as the upthrust from the water balances out the downward force of gravity. The shape and size of an object affects how much upthrust it receives, with larger, flatter surfaces receiving more upthrust. This explains why people and objects are buoyant and float in water.
Laws of Motion
Newton's three laws of motion are summarized as follows: (1) The law of inertia states that an object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force. It describes an object's resistance to changes in motion known as inertia. (2) The law of acceleration, F=ma, asserts that a net force causes an object's acceleration and acceleration is produced when a force acts on a mass. (3) The law of interaction explains that for every action there is an equal and opposite reaction between two objects.
Friction
Friction is a force that opposes the relative motion between two objects in contact. There are two main types of friction: static friction and kinetic friction. Friction can be both helpful and harmful. It allows for walking and braking a bicycle but also causes wear and tear over time. Friction depends on factors like the roughness and weight of surfaces, and it can be increased or decreased through these surface properties.
Archimedes principle
Archimedes' principle states that when an object is fully or partially submerged in a fluid, it experiences an upthrust equal to the weight of the fluid displaced. This principle explains why objects float or sink based on their density. If an object's density is greater than the fluid, it will sink, and if its density is less than the fluid, it will float. The upthrust force reduces the apparent weight of the submerged object. Applications of Archimedes' principle include determining ship drafts, submarine depths, and fluid densities using instruments like hydrometers.
Buoyant force & archimedes principle
This presentation is about the Buoyant force & Archimedes Principle . It gives a clear and brought idea about the principle of Archimedes
upthrust.pptx
This document discusses upthrust, Archimedes' principle, and floatation. It defines upthrust as the upward force exerted on a body submerged in a fluid. According to Archimedes' principle, the upthrust on a body is equal to the weight of the fluid it displaces. The principle of floatation states that an object floats when the upthrust equals its weight, and sinks when the upthrust is less than its weight. Applications of these principles include why ships and nails float or sink, and the purpose of the Plimsoll line marked on ship hulls.
Momentum
Momentum is a characteristic of moving objects related to its mass and velocity. It is calculated by multiplying mass and velocity, with units of kg*m/s. An object's momentum is in the direction of its velocity, and greater momentum means it is harder to stop the object. Both greater mass and velocity result in higher momentum. The total momentum in a system is conserved during interactions and collisions according to the law of conservation of momentum.
Power point presentation on kinetic energy and potential energy
The document discusses different types of energy. It defines energy as the ability to do work and notes that it can never be created or destroyed, only transferred or stored. It then categorizes all energy as either potential energy, stored in an object, or kinetic energy, the energy of motion. Specific types of potential energy discussed include gravitational, elastic, and chemical potential energy.
Density Ppt
Density is a measurement of how tightly matter is packed together in an object. It is calculated by dividing an object's mass by its volume. Ice floats in water because it has a lower density than water - ice has a density of about 0.9 g/cm3 while water has a density of 1 g/cm3. Hot air balloons and magma rise because they have lower densities than the surrounding air and rock, respectively. A ship will float if its overall density is less than that of water, which is 1 g/cm3.
Archimedes principle
The document discusses buoyancy and how objects float or sink in water. It states that an object's apparent weight is less than its actual weight when submerged due to buoyant force. Buoyant force equals the weight of fluid displaced and is equal to the actual weight minus the apparent weight. A boat made of steel floats because its large size and hollow shape displace a large volume of water, creating enough buoyant force to support the boat's weight, while a solid steel block sinks because it only displaces a small volume of water, resulting in insufficient buoyant force.
Momentum & Energy
The document discusses momentum, energy, and collisions. It defines momentum as mass times velocity and describes momentum as a vector quantity. It explains that momentum is conserved during collisions and distinguishes between external and internal forces. It also defines different types of collisions, such as elastic and inelastic collisions. The document discusses different forms of energy, including kinetic energy and potential energy. It relates force to changes in momentum using impulse.
Floating & Sinking
Floating & Sinking, buoyant forces, displacement, density, volume, mass. All explained thoroughly and simplified for ESL learners at International Schools. Question slides refer to the book Interactive Physical Science.
Upthrust
Sacred Heart School student Sumer Sikri presents to Rohan Jain on upthrust and Archimedes. Upthrust is the upward force that objects experience when submerged in fluids, and depends on the object's surface area and shape. Archimedes discovered that upthrust equals the weight of the fluid displaced by the object. He developed Archimedes' principle, which explains that immersed objects experience an upward buoyant force equal to the weight of the fluid they displace.
Force and motion remind (2)
Newton's three laws of motion describe the relationship between forces and motion:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force.
3) For every action, there is an equal and opposite reaction.
Buoyancy & floatation
1) Buoyancy is the upward force exerted by a fluid that opposes the weight of an immersed object. This force is equal to the weight of the fluid displaced by the object and allows objects with lower density than the fluid to float.
2) The key factors that determine if an object will float or sink are the density of the object compared to the fluid density, the weight of fluid displaced versus the object's weight, and the object's shape.
3) Stability of floating objects depends on the location of the meta-center point, which is where the line of buoyancy force meets the axis when tilted. Stable equilibrium requires the meta-center to be above the center of gravity
Circular Motion
The document discusses circular motion and Newton's laws of motion. It covers topics like circular motion in horizontal circles, vertical circular motion using a bucket of water as an example, and loop the loops. Newton's laws state that an object will remain at rest or in uniform motion unless acted on by an external force, acceleration is proportional to force, and for every action there is an equal and opposite reaction. Circular motion concepts like centripetal force, acceleration, and how tension provides the centripetal force in different situations are also examined.
What's hot (20)
Power point presentation on kinetic energy and potential energy
Power point presentation on kinetic energy and potential energy
More from MUDIT GUPTA
Ppt on nationalism in india...
The non-cooperation movement and subsequent civil disobedience movements in the 1920s-1930s saw participation from many social groups in India. However, their interpretations of "swaraj" or self-rule differed based on their interests. For example, farmers fought high tax revenues while industrial workers remained distant. The movements also faced limitations as not all communities, such as Dalits led by Ambedkar, felt their issues were addressed. Ultimately, the movements helped foster a sense of collective Indian identity and nationalism through united struggle against British rule.
Ppt on equations of motion by graphival method made by mudit gupta
This document presents the three equations of motion: 1) acceleration equals change in velocity over time, 2) distance equals initial velocity times time plus half acceleration times time squared, and 3) change in velocity squared equals two times acceleration times change in distance. Graphs are used to derive the equations. A video demonstrates all three equations of motion and the document concludes by recapping the three equations learned through a graphical approach.
Ppt on energy and power resource made by mudit gupta class 9 th
Power resources can be categorized as conventional or non-conventional. Conventional resources that have long been in common use include firewood and fossil fuels like coal, petroleum, and natural gas. Non-conventional renewable resources that are unlimited include solar, wind, nuclear, geothermal, tidal, and bio gas energy. These alternative sources harness energy from the sun, wind, heat below the Earth's surface, water, and organic waste to generate electricity without the same environmental impacts as fossil fuels.
ppt on buoyancy
Buoyancy is the upward force exerted by a fluid that opposes the weight of an immersed object. The pressure of the fluid increases with depth, creating a force that pushes up on any submerged object. The buoyant force can be measured by subtracting the weight of an object in water from its weight in air, and is equal to the weight of the fluid it displaces.
archimedes principle
Archimedes was a Greek scientist who discovered the principle of buoyancy, now known as Archimedes' Principle, after noticing that the water level rose when he got into a bath. His work in geometry, mechanics, and understanding of levers helped the Greek army defeat the Romans. Archimedes' Principle states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid displaced by the object. This principle is used in ship and submarine design and in instruments like lactometers and hydrometers that measure density. The formula for Archimedes' Principle relates the density of an object to the density of the fluid, allowing calculation of buoyant force without measuring volumes
ARCHIMEDES' PRINCIPLE
Archimedes was a Greek scientist who discovered the principle of buoyancy, now known as Archimedes' Principle, after noticing that the water level rose when he got into a bath. His work in geometry, mechanics, and understanding of levers helped the Greek army defeat the Romans. Archimedes' Principle states that the buoyant force on an object in a fluid is equal to the weight of the fluid displaced by the object. This principle is used in ship and submarine design and in instruments like lactometers and hydrometers that measure fluid density.
ARCHIMEDES' PRINCIPLE
Archimedes was a Greek scientist who discovered the principle of buoyancy, now known as Archimedes' Principle, after noticing that he displaced water in a bath tub when he stepped inside. His work in geometry, mechanics, and understanding of levers helped the Greek army defeat the Romans. Archimedes' Principle states that the buoyant force on an object in a fluid is equal to the weight of the fluid displaced by the object. This principle is used in ship and submarine design and in instruments like lactometers and hydrometers that measure density. The formula for Archimedes' Principle relates the density of an object to the density of the fluid, allowing calculation of buoyant force without measuring volumes.
More from MUDIT GUPTA (7)
Ppt on equations of motion by graphival method made by mudit gupta
Ppt on equations of motion by graphival method made by mudit gupta
Ppt on energy and power resource made by mudit gupta class 9 th
Ppt on energy and power resource made by mudit gupta class 9 th
Recently uploaded
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Topic : Bed making
Subject : Nursing Foundation
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Solutons Maths Escape Room Spatial .pptx
Solutions of Puzzles of Mathematics Escape Room Game in Spatial.io
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdHow to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Constructing Your Course Container for Effective Communication
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Recently uploaded (20)
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
IGCSE Biology Chapter 14- Reproduction in Plants.pdf
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
B. Ed Syllabus for babasaheb ambedkar education university.pdf
B. Ed Syllabus for babasaheb ambedkar education university.pdf
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Constructing Your Course Container for Effective Communication
Constructing Your Course Container for Effective Communication
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
BUOYANCY
- 2. What is buoyancy ? • Buoyancy is an upward force exerted by a fluid that opposes the weight of an immersed object. In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid.
- 3. Illustrations: • The bottom of the fish is deeper so there is more fore pushing up on it – a buoyancy
- 4. How to measure the buoyant force • Weight of object in air- weight of object in water =upward buoyant force. • The buoyant force is equal to the weight of the displaced water