(PRIYA) Rajgurunagar Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
Building project By Md. Towhidur Rahman
1.
2. Course Title: Details of Construction
Course Code : CE 200
Section : 10B (Karatoya)
Presented To:
Md. Ferdous Wahid
Lecturer
Department Of Civil Eng.
Sonargaon University.
3. Presented By :
1
•Md. Towhidur Rahman
•BCE 1701010020
2
•Emdadul Islam
•BCE 1701010091
3
•Mohosin Ali
•BCE 1701010089
18. A beam is a structural
element that primarily
resists loads applied laterally to
the beam's axis. Its mode of
deflection is primarily
by bending. The loads applied
to the beam result in reaction
forces at the beam's support
points.
19. A column or pillar in architecture
and structural engineering is a
structural element that transmits,
through compression, the weight
of the structure above to other
structural elements below. In
other words, a column is a
compression member.
21. A stair, or a stair step is one step in a flight of stairs In
buildings, stairs is a term applied to a complete flight of steps
between two floors. A stair flight is a run of stairs or steps between
landings. A staircase or stairway is one or more flights of stairs
leading from one floor to another, and includes landings, newel
posts, handrails, balustrades and additional parts. A stairwell is a
compartment extending vertically through a building in which
stairs are placed.
30. Basic building components
SUPER STURCTURE
Walls and columns,
Floors,
Beams,
Roofs and slabs,
Lintels and Archers,
Doors and Window,
Stairs
Substructure
Foundation
(Shallow,
Deep)
32. Cycle process of building construction
The main stages are:
1: Planning
2: Design
3: Tendering
4: Construction Process
5: Handover
6: Evaluation
33. Imposition of Loads
Loads must be transmitted
to structural elements
Terms associated with
imposition:
– Axial load
– Eccentric load
– Torsion load
34. Masonry
Common term that refers to brick, concrete block,
and stone
Used to form load-bearing walls
Veneer wall supports its own weight
Mortar holds units together and have little
or no tensile or shear strength
Excellent fire-resistive qualities
35. Cement
Mixture of calcium silicates and aluminum ciliates
and aluminum ferrite
It is give good compressive strength
It have good setting time
We use as binding material