Bazza Design case study - Automotive Seating for Faurecia
•Download as PPTX, PDF•
2 likes•1,368 views
The document describes a case study for an automotive seating design project. The design featured ultra-thin and lightweight plastic seats with cushions inspired by sports shoe technology, offering comfort, safety, lower weight, and recyclability. The seats were nearly 15% lighter than conventional seats. The individual created 3D surface models and photorealistic renderings of the seat cushions. Images showed prototypes of the innovative seat design, which was later featured in Motor Trend magazine.
Report
Share
Report
Share
Recommended
Objective seating comfort scores for auto seat design
Objective seating comfort scores for seat design in automobiles are available to replace subjective seating comfort scores. The score is calculated from the optimized math data that defines a seat design and the position of digital human bodies sitting in the seat.
Car seat design for driver satisfaction
J. D. Power survey reports seats in car are next to last in satisfaction despite historical high in quality. Add-on content to basic seat design does not change satisfaction rank. Since seats are for sitting, drivers must not be able to sit as they prefer. Car seat design guidelines must improve accommodation for variation in sitting postures.
Auto seat design and sitting comfort
- 40 drivers participated in a study that tested the comfort of two different auto seat designs (Drive A and Drive B) over 2-hour highway drives.
- The seat tested in Drive B was modified from the production seat used in Drive A based on discomfort findings.
- Measurements of drivers in both drives found that the modified seat in Drive B resulted in drivers adopting a more neutral spinal posture compared to the slumped posture with the original seat.
Seat design
Research into automobile seat design has identified key parameters that improve comfort. Seat design must consider fit, feel, and support parameters. Fit parameters ensure the seat accommodates a range of body sizes using anthropometric data. Feel parameters minimize pressure points and maintain a suitable temperature. Support parameters influence posture through lumbar support that adjusts in height and firmness, adjustable armrests and a forward-tilting seatback. The goal is a seat with no discomfort that supports the natural curves of the spine.
Design parameters of driver seat in an automobile
Abstract Driver seat is an important system of any automobile, it is also complicated system consists of so many parts, adjustments as well as safety systems. A seat adjustment includes height adjustment, fore and aft adjustment, back recline adjustments. Safety systems include seat belts, air bags and advanced head restraints. Generally professional driver works more than eight hours per day of a week, therefore driver seat must be designed by considering all the parameters. Also uneven road condition induces the vibration in a vehicle transmitted to driver body. Poorly designed driver seat affects the driver health and psychological conditions of mind. Three main objectives of any driver seats are safety, health and comfort of driver. This paper presents all the parameters of driver seat such as anthropometry of human, ergonomics related parameters, seat materials, safety related parameters, comfort related parameters as well as weight and aesthetics with classifications and basics of driver seat. Keywords: Driver Seat, Comfort, Safety, Health, Adjustments.
Design analysis of bumper beam subjected to offset impact loading for automot...
The bumper beam is fixed to front portion of the automobile structure and it is one of the primary component which undergoes damage and transfers the forces to the rest of the structure.Thus the modern bumper beam systems should play a key part in the safety concept of an automobile, ensuring that minimal accelerations are transferred to the passenger.
Thesis abstract
This document summarizes a thesis that explored the Australian seating service experience from the perspectives of four stakeholder groups: consumers, care providers, prescribing clinicians, and vendors. Sixty participants took part in in-depth interviews about their experiences procuring specialized wheelchair seating. The interviews were analyzed to identify common themes across the four groups. A second analysis looked at the data through the lenses of a wheelchair service delivery model and principles of social justice. The analysis revealed a fragmented seating service sector dominated by restrictive funding. It identified eight major findings about the Australian seating service sector, including the importance of trustworthy partnerships, how the funding system influences services, a guide for determining case complexity, and steps in the seating service and procurement process. The thesis
Gervais Tompkin, Gensler, at Opportunity Green 2009
The document discusses how cities and workstyles are becoming more "open source" through increased mobility and flexible work arrangements. It describes shifts in lifestyle from fixed 9-5 work schedules to 24/7 work, workstyles from the office being the primary workspace to away from the office, officespace from underutilized fixed desks to densified shared spaces, foot traffic patterns from limited lunch hours to extended hours, building pro formas from large single tenants to smaller multi-tenant clusters, and carbon emissions from high per capita to lower through mobility and sustainability. The implications discussed include changes for individuals, companies, building owners, policymakers, and metrics around collaboration, virtual work, social computing, cluster design, employee autonomy, operating costs,
Recommended
Objective seating comfort scores for auto seat design
Objective seating comfort scores for seat design in automobiles are available to replace subjective seating comfort scores. The score is calculated from the optimized math data that defines a seat design and the position of digital human bodies sitting in the seat.
Car seat design for driver satisfaction
J. D. Power survey reports seats in car are next to last in satisfaction despite historical high in quality. Add-on content to basic seat design does not change satisfaction rank. Since seats are for sitting, drivers must not be able to sit as they prefer. Car seat design guidelines must improve accommodation for variation in sitting postures.
Auto seat design and sitting comfort
- 40 drivers participated in a study that tested the comfort of two different auto seat designs (Drive A and Drive B) over 2-hour highway drives.
- The seat tested in Drive B was modified from the production seat used in Drive A based on discomfort findings.
- Measurements of drivers in both drives found that the modified seat in Drive B resulted in drivers adopting a more neutral spinal posture compared to the slumped posture with the original seat.
Seat design
Research into automobile seat design has identified key parameters that improve comfort. Seat design must consider fit, feel, and support parameters. Fit parameters ensure the seat accommodates a range of body sizes using anthropometric data. Feel parameters minimize pressure points and maintain a suitable temperature. Support parameters influence posture through lumbar support that adjusts in height and firmness, adjustable armrests and a forward-tilting seatback. The goal is a seat with no discomfort that supports the natural curves of the spine.
Design parameters of driver seat in an automobile
Abstract Driver seat is an important system of any automobile, it is also complicated system consists of so many parts, adjustments as well as safety systems. A seat adjustment includes height adjustment, fore and aft adjustment, back recline adjustments. Safety systems include seat belts, air bags and advanced head restraints. Generally professional driver works more than eight hours per day of a week, therefore driver seat must be designed by considering all the parameters. Also uneven road condition induces the vibration in a vehicle transmitted to driver body. Poorly designed driver seat affects the driver health and psychological conditions of mind. Three main objectives of any driver seats are safety, health and comfort of driver. This paper presents all the parameters of driver seat such as anthropometry of human, ergonomics related parameters, seat materials, safety related parameters, comfort related parameters as well as weight and aesthetics with classifications and basics of driver seat. Keywords: Driver Seat, Comfort, Safety, Health, Adjustments.
Design analysis of bumper beam subjected to offset impact loading for automot...
The bumper beam is fixed to front portion of the automobile structure and it is one of the primary component which undergoes damage and transfers the forces to the rest of the structure.Thus the modern bumper beam systems should play a key part in the safety concept of an automobile, ensuring that minimal accelerations are transferred to the passenger.
Thesis abstract
This document summarizes a thesis that explored the Australian seating service experience from the perspectives of four stakeholder groups: consumers, care providers, prescribing clinicians, and vendors. Sixty participants took part in in-depth interviews about their experiences procuring specialized wheelchair seating. The interviews were analyzed to identify common themes across the four groups. A second analysis looked at the data through the lenses of a wheelchair service delivery model and principles of social justice. The analysis revealed a fragmented seating service sector dominated by restrictive funding. It identified eight major findings about the Australian seating service sector, including the importance of trustworthy partnerships, how the funding system influences services, a guide for determining case complexity, and steps in the seating service and procurement process. The thesis
Gervais Tompkin, Gensler, at Opportunity Green 2009
The document discusses how cities and workstyles are becoming more "open source" through increased mobility and flexible work arrangements. It describes shifts in lifestyle from fixed 9-5 work schedules to 24/7 work, workstyles from the office being the primary workspace to away from the office, officespace from underutilized fixed desks to densified shared spaces, foot traffic patterns from limited lunch hours to extended hours, building pro formas from large single tenants to smaller multi-tenant clusters, and carbon emissions from high per capita to lower through mobility and sustainability. The implications discussed include changes for individuals, companies, building owners, policymakers, and metrics around collaboration, virtual work, social computing, cluster design, employee autonomy, operating costs,
Automotive Design Exteriors
Acura and Honda Gen Z City Car, Red Bull Baja 1000 Utility Vehicle, and Lamborghini Supercar Projects
• Utilized the design process from concept creations to sketch exploration, design refinement, to final proposal
• Produced presentation layouts with brand, buyer, concept, package, ideation, styling refinements and final design
• Created brand image and buyer to concept; human relation to package and vehicle architecture
• Prepared automotive sketches and renderings with respect to perspective, light source, basic reflection and color shift
Auto Seat Design For Comfort And Speed To Market
Auto seat design uses old process that is slow and unreliable. Virtual seat design is available to update the industry for speed and driver comfort.
Multidisciplinary Design Optimisation Strategies for Lightweight Vehicle Stru...
The document summarizes a study that used multidisciplinary design optimization to reduce the mass of a lightweight vehicle structure. The study optimized panel thicknesses and material grades to improve crash performance in frontal, side, and pole impacts as well as torsional rigidity. A radial basis function metamodel was used to approximate the vehicle responses during optimization to reduce computational cost. The initial vehicle model performance met crashworthiness targets but further mass reduction was possible through optimization.
Interior design to comfortably fit all drivers in the car
This document summarizes research from Michigan State University's Ergonomics Research Laboratory (ERL) on improving vehicle interior design to better accommodate drivers of various sizes. The ERL found that vehicle interiors are typically designed around a hypothetical "Oscar" occupant without consideration for how drivers sit in seats. Through studies using modified production seats, the ERL demonstrated that accounting for seated postures can significantly change interior dimensions to better fit short and tall drivers. The ERL then developed seated driver models that can accurately predict fit and comfort issues. With these models, the ERL designs optimized seating packages and interior layouts to comfortably fit drivers ranging from 4'11" to 6'3" in height.
Car seats, where comfort doesn't meet owner expectations
Car seats have struggled for many years to live up to promise. This struggle is explained by a design process that leaves the seat out of interior design until all positions and geometry of the interior have been established. The result is unpredictable comfort, unexpected problems with vision of the dash and reach to controls and a general inability to sit in your preferred posture. A new tool is available to provide the manufacturers with seated driver models that represent the seated needs of the driver at the start of design. This presentation is the story of the current process and the tool that can fix it.
Virtual Tool Maximizes Seating Comfort
ERL is a virtual tool that explains subjective discomfort to the engineer/designer and designs seats to maximize comfort for all driver body sizes. It calculates a comfort score that outperforms J D Power and Consumer Reports in its correlation to subjective driver scores. The result is a tool that reduces time to market, development costs, and provides seats in vehicles that maximize comfort for the driver.
Car seats for comfort at vehicle concept
This document outlines 3 steps for designing comfortable and safe car seats at the vehicle concept stage. Step 1 is to use driver models and the SAE J826 ("Oscar") guidelines to evaluate ergonomics and comfort. Step 2 is to use the same to ensure safety and comfort compliance with Federal regulations. Step 3 is to optimize the seat design for different driver postures while meeting Oscar guidelines to achieve the best comfort scores. The document emphasizes that ERL's driver models are uniquely validated to design seats accommodating all drivers at the initial concept phase.
Your Automotive Sill or Map Pocket Interior Lit 2-2016 Lumvatech LED Backlight
Light your automotive sill, map pocket, interior trim, or center stack with LED backlighting using thin light panels from Lumvatech.
Vehicle Body Terminology, Visibility & Space
This document discusses key terms related to vehicle body engineering including tailfins, center consoles, fascias, and other exterior and interior body parts. It also covers requirements for automobile body design such as strength, stiffness, adequate interior space, minimizing air drag, weather protection, corrosion resistance, and safety in accidents. Finally, it addresses the importance of visibility and methods to improve frontal, downward, and rearward visibility for drivers through strategic window placement and sizing.
Side Impact and composite rail analysis using LS-DYNA
Side impact test of truck was simulated in LS-DYNA with pole and moving deformable barrier according to FMVSS and IIHS. Composite materials were used in rails to see the difference between steel and composite.
Crashwortiness and Occupant Protection
The document summarizes side impact crash test simulations conducted on a 1993 Ford Taurus finite element model according to FMVSS 214, NCAP, and IIHS testing protocols. The simulations showed injury metrics like TTI(d) and pelvis acceleration within acceptable limits for FMVSS 214. Velocity curves for the NCAP test matched well with actual data. B-pillar deformation for the IIHS test was acceptable. Overall, the simulations produced results comparable to real crash tests.
1.vbe intro compatibility-mode_
The document discusses vehicle body engineering and provides details about different types of vehicle bodies. It begins with introducing basic features of an automobile including its chassis, body, power unit, and other sub-systems. It then outlines the course topics which include car body details, vehicle aerodynamics, bus body details, and commercial vehicle details. Next, it classifies automobiles based on use, capacity, make, model, fuel type, drive type, and construction type. Finally, it provides specifics about different car body styles including saloon, hatchback, coupe, convertible, limousine, estate car, pickup, station wagon, and sports car.
Head Impact
This document discusses engineering design and testing for head impacts. It outlines establishing head impact zones, determining locations that could experience hits, performing head impact tests at impact points with various angles, and evaluating parts to determine if they pass or fail standards.
Bringing aluminium in the car body design to support lightweighting
Bringing aluminium in the car body design to support lightweighting
Frank Gensty, Laurent Laszczyk, Olivier Rebuffet
Bad Nauheim, March 16, 2016
vbe cc ppt general information - saeiss skip
The document provides an overview of vehicle body engineering. It discusses the objectives and outcomes of the course, which are to impart knowledge about vehicle construction, aerodynamics, passenger car body design, and materials. It also outlines the key functions of vehicle systems like the body, chassis, powertrain, and climate control. Additionally, it examines important vehicle attributes such as cost, weight, safety, and noise vibration harshness. The importance of vehicle body design and the role of the vehicle body engineer are explored. Finally, vehicles can be generally classified based on factors like intended use, passenger capacity, manufacturer, fuel type, drive configuration, and number of wheels.
Car trims mould manufacturing process
With the fact that society economy promptness develops the ceaseless rise composing in reply the people living standard. This slide demonstrate the manufacturing process of plastic car trims. Visit our Car Trims: http://www.automotive-mould.com/side-trim-mould.html
ACE Seats Crash Test 2015
This document summarizes the capabilities of seat evaluation simulations including frontal/rear impact, seatbelt anchorage tests, child restraint systems, head restraint strength, and other tests. The simulations use standardized procedures and load cases to evaluate compliance with standards. Comprehensive reports are generated identifying critical areas, displacement/stress outputs, and countermeasures. Correlation with physical test results is also provided.
Innovation_Days_2009_GB_short.pdf
The document discusses BMW's research into future innovations related to vehicle interiors, infotainment systems, and mobility. Key areas of research include using light design to enhance the driving experience, developing lighter but still safe and comfortable car seats, and improving head-up and central information displays. The goal is to better integrate technology while maintaining driver focus, comfort, and safety.
Portfolio 2014
This is my design portfolio. If you are interested in a higher quality version go to this URL: www.lyorvanvliet.com/personal/Portfolio_LMDvanVliet_2014.pdf
iaetsd Economic analysis and re design of driver’s car seat
The document discusses redesigning car seats to improve comfort. It notes that car seat design must balance comfort, safety, and health. Static comfort relates to the seat's form and support, while dynamic comfort considers vibration levels. The study reexamines existing car seat designs and proposes a novel design with improvements in form, features, usability, and comfort. A survey was also conducted to define important comfort factors like pain prevention to help guide future seat designs.
Final presentation, automotive design orbis
The document discusses the design of a new vehicle. It notes that aesthetics and personal expression are now important factors for customers in vehicle choice. The design aims to combine form and function while accommodating people of different ages and abilities. Research was conducted on factors like headroom, back strain, ease of entering/exiting, and mobility issues. Feedback was received praising the vehicle's aggressive yet elegant styling and innovative features that show thoughtful design.
Work 2003+
From 2003 to 2009, the author managed various projects from concept to production. This included concept design, detail design, CAD modeling, prototyping, supplier liaison, tooling procurement, product testing, assembly planning, and product marketing. The Orangebox design and development team, led by Gerry Taylor, assisted with many of the projects which included machinery, tooling, and components for a seating production line.
More Related Content
Viewers also liked
Automotive Design Exteriors
Acura and Honda Gen Z City Car, Red Bull Baja 1000 Utility Vehicle, and Lamborghini Supercar Projects
• Utilized the design process from concept creations to sketch exploration, design refinement, to final proposal
• Produced presentation layouts with brand, buyer, concept, package, ideation, styling refinements and final design
• Created brand image and buyer to concept; human relation to package and vehicle architecture
• Prepared automotive sketches and renderings with respect to perspective, light source, basic reflection and color shift
Auto Seat Design For Comfort And Speed To Market
Auto seat design uses old process that is slow and unreliable. Virtual seat design is available to update the industry for speed and driver comfort.
Multidisciplinary Design Optimisation Strategies for Lightweight Vehicle Stru...
The document summarizes a study that used multidisciplinary design optimization to reduce the mass of a lightweight vehicle structure. The study optimized panel thicknesses and material grades to improve crash performance in frontal, side, and pole impacts as well as torsional rigidity. A radial basis function metamodel was used to approximate the vehicle responses during optimization to reduce computational cost. The initial vehicle model performance met crashworthiness targets but further mass reduction was possible through optimization.
Interior design to comfortably fit all drivers in the car
This document summarizes research from Michigan State University's Ergonomics Research Laboratory (ERL) on improving vehicle interior design to better accommodate drivers of various sizes. The ERL found that vehicle interiors are typically designed around a hypothetical "Oscar" occupant without consideration for how drivers sit in seats. Through studies using modified production seats, the ERL demonstrated that accounting for seated postures can significantly change interior dimensions to better fit short and tall drivers. The ERL then developed seated driver models that can accurately predict fit and comfort issues. With these models, the ERL designs optimized seating packages and interior layouts to comfortably fit drivers ranging from 4'11" to 6'3" in height.
Car seats, where comfort doesn't meet owner expectations
Car seats have struggled for many years to live up to promise. This struggle is explained by a design process that leaves the seat out of interior design until all positions and geometry of the interior have been established. The result is unpredictable comfort, unexpected problems with vision of the dash and reach to controls and a general inability to sit in your preferred posture. A new tool is available to provide the manufacturers with seated driver models that represent the seated needs of the driver at the start of design. This presentation is the story of the current process and the tool that can fix it.
Virtual Tool Maximizes Seating Comfort
ERL is a virtual tool that explains subjective discomfort to the engineer/designer and designs seats to maximize comfort for all driver body sizes. It calculates a comfort score that outperforms J D Power and Consumer Reports in its correlation to subjective driver scores. The result is a tool that reduces time to market, development costs, and provides seats in vehicles that maximize comfort for the driver.
Car seats for comfort at vehicle concept
This document outlines 3 steps for designing comfortable and safe car seats at the vehicle concept stage. Step 1 is to use driver models and the SAE J826 ("Oscar") guidelines to evaluate ergonomics and comfort. Step 2 is to use the same to ensure safety and comfort compliance with Federal regulations. Step 3 is to optimize the seat design for different driver postures while meeting Oscar guidelines to achieve the best comfort scores. The document emphasizes that ERL's driver models are uniquely validated to design seats accommodating all drivers at the initial concept phase.
Your Automotive Sill or Map Pocket Interior Lit 2-2016 Lumvatech LED Backlight
Light your automotive sill, map pocket, interior trim, or center stack with LED backlighting using thin light panels from Lumvatech.
Vehicle Body Terminology, Visibility & Space
This document discusses key terms related to vehicle body engineering including tailfins, center consoles, fascias, and other exterior and interior body parts. It also covers requirements for automobile body design such as strength, stiffness, adequate interior space, minimizing air drag, weather protection, corrosion resistance, and safety in accidents. Finally, it addresses the importance of visibility and methods to improve frontal, downward, and rearward visibility for drivers through strategic window placement and sizing.
Side Impact and composite rail analysis using LS-DYNA
Side impact test of truck was simulated in LS-DYNA with pole and moving deformable barrier according to FMVSS and IIHS. Composite materials were used in rails to see the difference between steel and composite.
Crashwortiness and Occupant Protection
The document summarizes side impact crash test simulations conducted on a 1993 Ford Taurus finite element model according to FMVSS 214, NCAP, and IIHS testing protocols. The simulations showed injury metrics like TTI(d) and pelvis acceleration within acceptable limits for FMVSS 214. Velocity curves for the NCAP test matched well with actual data. B-pillar deformation for the IIHS test was acceptable. Overall, the simulations produced results comparable to real crash tests.
1.vbe intro compatibility-mode_
The document discusses vehicle body engineering and provides details about different types of vehicle bodies. It begins with introducing basic features of an automobile including its chassis, body, power unit, and other sub-systems. It then outlines the course topics which include car body details, vehicle aerodynamics, bus body details, and commercial vehicle details. Next, it classifies automobiles based on use, capacity, make, model, fuel type, drive type, and construction type. Finally, it provides specifics about different car body styles including saloon, hatchback, coupe, convertible, limousine, estate car, pickup, station wagon, and sports car.
Head Impact
This document discusses engineering design and testing for head impacts. It outlines establishing head impact zones, determining locations that could experience hits, performing head impact tests at impact points with various angles, and evaluating parts to determine if they pass or fail standards.
Bringing aluminium in the car body design to support lightweighting
Bringing aluminium in the car body design to support lightweighting
Frank Gensty, Laurent Laszczyk, Olivier Rebuffet
Bad Nauheim, March 16, 2016
vbe cc ppt general information - saeiss skip
The document provides an overview of vehicle body engineering. It discusses the objectives and outcomes of the course, which are to impart knowledge about vehicle construction, aerodynamics, passenger car body design, and materials. It also outlines the key functions of vehicle systems like the body, chassis, powertrain, and climate control. Additionally, it examines important vehicle attributes such as cost, weight, safety, and noise vibration harshness. The importance of vehicle body design and the role of the vehicle body engineer are explored. Finally, vehicles can be generally classified based on factors like intended use, passenger capacity, manufacturer, fuel type, drive configuration, and number of wheels.
Car trims mould manufacturing process
With the fact that society economy promptness develops the ceaseless rise composing in reply the people living standard. This slide demonstrate the manufacturing process of plastic car trims. Visit our Car Trims: http://www.automotive-mould.com/side-trim-mould.html
ACE Seats Crash Test 2015
This document summarizes the capabilities of seat evaluation simulations including frontal/rear impact, seatbelt anchorage tests, child restraint systems, head restraint strength, and other tests. The simulations use standardized procedures and load cases to evaluate compliance with standards. Comprehensive reports are generated identifying critical areas, displacement/stress outputs, and countermeasures. Correlation with physical test results is also provided.
Viewers also liked (17)
Multidisciplinary Design Optimisation Strategies for Lightweight Vehicle Stru...
Multidisciplinary Design Optimisation Strategies for Lightweight Vehicle Stru...
Interior design to comfortably fit all drivers in the car
Interior design to comfortably fit all drivers in the car
Car seats, where comfort doesn't meet owner expectations
Car seats, where comfort doesn't meet owner expectations
Your Automotive Sill or Map Pocket Interior Lit 2-2016 Lumvatech LED Backlight
Your Automotive Sill or Map Pocket Interior Lit 2-2016 Lumvatech LED Backlight
Side Impact and composite rail analysis using LS-DYNA
Side Impact and composite rail analysis using LS-DYNA
Bringing aluminium in the car body design to support lightweighting
Bringing aluminium in the car body design to support lightweighting
Similar to Bazza Design case study - Automotive Seating for Faurecia
Innovation_Days_2009_GB_short.pdf
The document discusses BMW's research into future innovations related to vehicle interiors, infotainment systems, and mobility. Key areas of research include using light design to enhance the driving experience, developing lighter but still safe and comfortable car seats, and improving head-up and central information displays. The goal is to better integrate technology while maintaining driver focus, comfort, and safety.
Portfolio 2014
This is my design portfolio. If you are interested in a higher quality version go to this URL: www.lyorvanvliet.com/personal/Portfolio_LMDvanVliet_2014.pdf
iaetsd Economic analysis and re design of driver’s car seat
The document discusses redesigning car seats to improve comfort. It notes that car seat design must balance comfort, safety, and health. Static comfort relates to the seat's form and support, while dynamic comfort considers vibration levels. The study reexamines existing car seat designs and proposes a novel design with improvements in form, features, usability, and comfort. A survey was also conducted to define important comfort factors like pain prevention to help guide future seat designs.
Final presentation, automotive design orbis
The document discusses the design of a new vehicle. It notes that aesthetics and personal expression are now important factors for customers in vehicle choice. The design aims to combine form and function while accommodating people of different ages and abilities. Research was conducted on factors like headroom, back strain, ease of entering/exiting, and mobility issues. Feedback was received praising the vehicle's aggressive yet elegant styling and innovative features that show thoughtful design.
Work 2003+
From 2003 to 2009, the author managed various projects from concept to production. This included concept design, detail design, CAD modeling, prototyping, supplier liaison, tooling procurement, product testing, assembly planning, and product marketing. The Orangebox design and development team, led by Gerry Taylor, assisted with many of the projects which included machinery, tooling, and components for a seating production line.
Japanese Marketing Case Study135
Transportation will be taking faster and more comfortable space for all passengers in next decades. The sharing ecosystem is more valuable and trust-proof than traditional testimony, because it is underlying third party evaluation. Transportable box will be public property and people might be tended to share it on universal fundamental among the citizenships with closed community.
Resent Resume
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to test for issues, analyzing warranty data to reduce costs, and managing production processes. He is skilled in many engineering tools and methodologies like Design for Six Sigma, GD&T, FMEA, and DOE.
Teague brian resume10 30-14. steeringx.docx2
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to evaluate design issues, reducing warranty costs, and managing quality systems. He also has an MBA and bachelor's degree in industrial management.
Brians Teagues experience
Brian Robert Teague has over 30 years of experience in engineering design, quality engineering, and project management. He has worked for major automotive companies like General Motors and suppliers. Some of his responsibilities have included redesigning vehicle components, conducting simulations to test for issues, analyzing warranty data to improve quality, and managing production processes. He has extensive experience using CAD/CAE software and problem-solving methodologies in the automotive industry.
Automobile design final
This document is a term paper on automobile design submitted to Amity University by Ankit Choudhary. It includes a title page, declaration by the student, certificate by the faculty guide, table of contents, and begins chapters on the introduction to automobile design, design elements, development process, computer aided design, small car designs of the Tata Nano and Honda Brio. The paper explores concepts in automobile design such as curvature of surfaces, packaging, wheels, clay modeling, class A surfaces, and the manufacturing process.
Teague brian resume9 20-13century. seatdocx
Brian Teague has over 30 years of experience in engineering design, quality, and project management roles in the automotive industry. He has worked at General Motors, various engineering design firms, and a vehicle parts supplier. His areas of expertise include plastic injection molding, virtual reality modeling, supplier quality, manufacturing support, and design for Six Sigma.
Resume_Nilesh Badgujar
Nileshkumar Badgujar is a design engineer with over 2 years of experience in automotive seating design at Johnson Controls Automotive Ltd in Pune, India. He has expertise in CAD software like CATIA V5, NX, and Teamcenter and has worked on programs for automakers like Tata, Renault, General Motors, and Mahindra. Some of his responsibilities include concept generation, CAD modeling, tolerance analysis, packaging studies, drawing creation, and project management using tools like A3 and Six Sigma. He holds a Bachelor's degree in Mechanical Engineering and regularly attends training to expand his technical skills.
NAMHEE KIM_Portfolio.compressed
Namhee Kim's design portfolio from 2016 includes 3D renderings of car headlights and coffee makers, 2D renderings of products like an Alessi juicer, and projects such as a DIY bookstand, a walking assist robot, and a light sculpture created through rapid prototyping. The portfolio shows Namhee's work in graphic design, product design, interiors design, and rendering.
Brendon portfolio
Brendon Dsouza is a mechanical engineering student with strong 3D modeling, prototyping, and design skills. He has extensive experience designing parts for injection molding and die casting applications using CAD software like NX, Catia, and Creo. Some of his project work includes designing a coconut tree climbing machine, various concept sketches, and assemblies like a 2-stroke engine and multiple plate clutch. He is seeking opportunities where he can apply his creative problem-solving and mechanical design abilities.
“Are we going to accept that we have to reduce comfort to meet weight reducti...
Dr. Olaf Biedermann, Director Innovation Europe at Faurecia Autositze GmbH, talks in the interview below about the on-going conflict between weight reduction and seating comfort and how the upcoming CO2 regulation affects it.
Read the interview with Dr. Olaf Biedermann, Faurecia Autositze GmbH here:
http://bit.ly/FaureciaBiedermann
Sasank gopinathan design portfolio 2020
Sasank Gopinathan is an industrial designer based in Malaysia. His portfolio includes designs for furniture, automotive concepts, and other products. Some highlights include the Dhyan lounge chair which can provide different environments for relaxation, and hair dryer concepts Kombu and Hemicyl that allow for ergonomic use in multiple positions. Gopinathan also designed the Bufori GT, a concept car intended to bridge different eras of styling for the Malaysian automaker Bufori. His goal is to create aesthetically pleasing designs that also have strong functionality.
Resume_Purushothaman
This curriculum vitae is for an experienced mechanical engineer with over 9 years of experience in automotive product design using CATIA V5. He has worked for several automotive companies, including Honda and Ford, where he specialized in body-in-white sheet metal and exterior design. He is proficient in CATIA V5, ENOVIA, and Teamcenter Engineering. He has a graduate degree in mechanical engineering and is currently seeking a new challenging role in automotive R&D.
Bazza Design case study - Website 3D Illustrations
Creation of photorealistic renderings of an electric automotive concept for use on the website of Methode Electronics
Ergonomics Automotive
The document discusses automotive design with respect to ergonomics. It covers five aspects of ergonomics, including safety and comfort. It describes using computer-aided design to simulate drivers and optimize cockpit ergonomics. It also discusses designing car controls and displays with symbols and aspects of automotive seat design for driver comfort.
Case studies IN RAPID PROTOTYPING
The document discusses several case studies of companies using 3D printing technologies for prototyping and manufacturing applications in automotive, footwear, architecture, and other industries. Specifically, it describes how automotive companies like Ford, Benteler, F1 Racing and Porsche use 3D printing for prototyping vehicle parts and testing designs. It also discusses how footwear companies like Adidas use 3D printing to quickly prototype new shoe designs.
Similar to Bazza Design case study - Automotive Seating for Faurecia (20)
iaetsd Economic analysis and re design of driver’s car seat
iaetsd Economic analysis and re design of driver’s car seat
“Are we going to accept that we have to reduce comfort to meet weight reducti...
“Are we going to accept that we have to reduce comfort to meet weight reducti...
Bazza Design case study - Website 3D Illustrations
Bazza Design case study - Website 3D Illustrations
More from Bazza Design
LEO - hand held meter for CO2/O2
Designed for OKO Labs - LEO is a battery operated, handheld analyzer designed to measure CO2, O2, Temperature, VOC, Relative Humidity and pH. Includes CO2 and O2 sensors. Optional modules: Temperature, Humidity, VOC and pH.
Bazza Design Case Study - Dash Camera Video System
DriveCam, a provider of video and data collection systems for transportation fleets, asked Bazza Design to assist them in the creation of a new low profile camera product to replace their current more vertically designed dash cam for vehicles. The current design was considered a visual obstruction for forward viewing by some of their customers. DriveCam also planned to include new features with the re-design that required a new packaging of the system. As new features go - the new device was to have two cameras facing in opposite directions. As these devices are intended to be mounted in a vehicle, one camera is intended to point out the windscreen to view the road ahead of the vehicle, and the other camera is intended to point inward, capturing the activities of the driver and as is possible, the activities of the vehicle passengers. It is to include multiple operation buttons and integrated adjustability for various windshield angle positioning. To facilitate operation at night, the device was also have some number of IR LEDs to illuminate the interior of the vehicle. It is imperative that the device is tamper resistant.
Bazza Design employed it’s design process to produce a series of slim line designs that tucked up nicely under the rear view mirror of a vehicle that in turn created minimal obstruction while adding more features to the design.
Bazza Design Case Study - Dimplex Thermal Solutions_ Chiller Design
Dimplex Thermal Solutions approached Bazza Design with the simple request to help them re-design and re-configure their basic chiller lines, starting with their 10 and 20 ton units. Dimplex wanted to look into standardizing construction methods, integrate components, modularize for design expansion and create a new look that would start to set them apart from their competition. Chillers are known for being pretty “industrial” and boxy in their look and Dimplex’s current models are no exception. The goal was to create strong looking designs that would be a step beyond competitive designs in terms of look, assembly and cost.
Bazza Design Case Study - Ergo Impact Foot Rest design
Bazza Design provided design support for the development of ideas and concepts for a foot rest that would work in concert with Ergo Impact's new sit-stand-lean chair – LeanRite™.
The foot rest concepts are based on the existing multi-level “proof of concept” model that Ergo Impact originally created before getting Bazza Design involved.
With Bazza Design - Ergo Impact considered designs that look like they belong with Lean Right providing high function and keeping in mind part count, assembly method and cost associated with the concepts created.
Bazza Design - 2017 CES trends and introductions
The document summarizes trends seen at the 2017 Consumer Electronics Show (CES). Some of the major trends discussed include:
1) TVs continued to showcase advancements in 4K and HDR display technology. Self-driving cars and connected vehicle technologies were also prominently featured.
2) Rideable electric vehicles like hoverboards were less of a focus after safety issues in 2016. Virtual and augmented reality products were present but lacked the hype of previous years.
3) Drones of various shapes and sizes were showcased, with many mimicking the popular DJI models. Wireless audio technology reigned supreme with new wireless headphones and speakers abundant.
4) Cameras had a smaller presence than usual
Bazza design 2016 neocon views and observations
The document summarizes observations from NEOCON, an annual contract furniture trade show. It notes a rise in adjustable "mushroom" stools to support sit-stand workstations. It also observes many companies copying the popular Brody lounge chair introduced last year. Adjustable desks are increasingly common, along with accompanying active seats that transition between sitting, perching, and standing. Lighting trends away from mechanical task lamps toward softer residential-style lamps. Furniture increasingly includes built-in power and wireless charging. Materials like EPP, two-shot molding, and molded hybrids were among the more interesting innovations seen.
Bazza Design case study - Namaste Task Lamp
Namaste - It is a customary greeting when individuals meet, and a valediction upon their parting . As it is most commonly used, Namaste is roughly equivalent to "greetings" or "good day," in English, implicitly with the connotation "to be well". As opposed to shaking hands, kissing or embracing each other in other cultures, Namaste is a non-contact form of respectful greeting and can be used universally while meeting a person of different gender, age or social status.
So it’s only appropriate that a new light design with a host of features greets you every day with warmth and is your last task before leaving for home.
Bazza Design - Photosynq Case Study
The document summarizes the product development process for a new plant photosynthesis measurement device. It describes the research phase which identified target user groups and competitive devices. Several design concepts were developed with a focus on ergonomics and making the device smaller and easier to hold than competitors. Prototypes and models were created to refine the design. The concept was finalized in CAD files and 3D printed models. Production of the device is scheduled to begin in November 2016.
Bazza design case study_Tiara fold out boat seat
Tiara Yachts was in need of a new type of fold seating for one of their large luxury boats. At the time current folding canvas seats and other jump seat designs were considered too flimsy and not up to Tiara quality standards for a boat that goes for $500,000 or more. My job was to improve the design over the current canvas foldout to provide occasional seating that was more up to Tiara quality standards for stability, fit and finish. It had to seat two, fold neatly into a specific space and have the minimum capability to hold 2 – two hundred pound people. I coordinated the design with one other designer and an engineer to work through the overall form with the proper kinematics that met the folding requirement of the project. In the process of design we were able to incorporate a enclosed standing leg to support the weight and two cup holders (an added bonus). When stowed the seat allowed for fishing of the back of the boat.
Bazza Design case study LED Work Lamp For Hamsar Diversco
The document describes the design process for an LED work lamp for heavy equipment applications. The lamp needed to have a rugged, versatile design that could withstand harsh environments. Several criteria were identified, including versatile mounting options, a rugged appearance, unique market look, and heat sink capability. Various concepts were explored incorporating rugged, iconic design elements. The winning design featured a wrap-around shape and bullet-shaped mounting points. It was refined in 3D with a cast metal back case serving as a heat sink. The final LED work lamp design was well-received in production.
Bazza Design case study - Rear View Mirror with Integrated Lighting for Donne...
Design and Development of a mass produced Interior Rear View Mirror with Integrated Lighting for multiple automotiv use (Ford, Chrysler, GM, etc),
Bazza Design case study - Hand Held Medical Device for Omega Medical
Bazza Design was tasked with redesigning a medical biopsy device to have a softer, less mechanical appearance and be more ergonomic for both left and right handed doctors. Through research, 3D modeling, and feedback from doctors, Bazza created a design with integrated buttons in logical positions and a form that fits comfortably in the hand. The final design was well-received and entered production.
Bazza Design case study Automotive Wireless Charging Station
Design and development of a wireless charging station for automotive application for Fulton Innovation - Amway
Bazza design case study ford corporate map dome lamp
Donnelly Corporation was tasked by Ford Motor Company to reduce the number of interior overhead lighting parts from fifty to seven universal designs. The document describes the design process for one such lighting product, the Ford corporate map dome lamp. Donnelly designed an "all lens" lamp that was cost-effective, required no color matching, and exceeded Ford's light output specifications. The simple, two-part design combined edgy and curved styling cues popular in Ford vehicles at the time. Following concept development, 3D modeling, and prototyping, the map dome lamp design was approved for production and is still used today in many Ford cars, trucks, SUVs, and crossovers.
Bazza design ghsp wellness branding
GHSP hired Bazza Design to create a new identity for their employee benefits group called LiveWell. Bazza Design conducted research on related logos, developed concepts focused on the three key areas of the benefits group, refined two chosen concepts, and selected a final design. To manage the brand's usage, Bazza Design also created a branding guide outlining rules for applying the new LiveWell logo to various materials.
Bazza design case study ces 2011 exhibit
Fulton Innovation hired Bazza Design to design their trade show exhibit for the 2011 Consumer Electronics Show. The exhibit was to feature a Tesla Roadster electric vehicle charging wirelessly from a simulated parking garage setting. Bazza Design created concepts including 3D layouts and sketches exploring variations. They refined ideas including a wireless power transmitter design and demonstration of the short distance needed for charging. The final installation incorporated many of Bazza Design's concept suggestions.
Bazza design case study organics cart
Cascade Cart Solutions sought a new organics waste cart design to enter the growing market. Bazza Design conducted research on collection trends, current products, and themes. Concept sketches explored various handle, latch, and body designs. 3D modeling and renderings refined a 25 gallon cart with sweeping lines, gravity latch, and dual handles integrated into the lid. The final design met criteria for safety, functionality, and automated collection.
DCN Fluorescent Assay Visualizer
The Fluorescent Assay Visualizer is a low cost, robust, field-deployable tool for interpreting high sensitivity qualitative fluorescent lateral flow or molecular assays. Significantly less expensive than a digital reader, but allowing the performance of a fluorescent test to be utilized in low cost or difficult field environments that will not support digital equipment.
Omega Medical and DCN Diagnostics approached Bazza Design with a need to refine this new concept as a hand held medical device. Some basic 3D was created by Omega to prove out their concept but they realized that they needed to work out the form in a ergonomic way that was comfortable to the hand and was sized correctly to personally carry.
Key Specifications:
Ultra-low cost
Robust to environmental conditions (heat and humidity)
Resistant to drop damage
Has long life
Can be set up for a variety of fluorophores
Can be set up to read either bare strips or cassettes
Cleanable
Applications Include:
Infectious disease testing in field environments
Biomarker testing in field environments
Biowarfare agent detection and other military applications
Agricultural or environmental tests
Laboratory use, during development of fluorescent tests or for interpretation of qualitative fluorescent assays
More from Bazza Design (18)
Bazza Design Case Study - Dash Camera Video System
Bazza Design Case Study - Dash Camera Video System
Bazza Design Case Study - Dimplex Thermal Solutions_ Chiller Design
Bazza Design Case Study - Dimplex Thermal Solutions_ Chiller Design
Bazza Design Case Study - Ergo Impact Foot Rest design
Bazza Design Case Study - Ergo Impact Foot Rest design
Bazza Design case study LED Work Lamp For Hamsar Diversco
Bazza Design case study LED Work Lamp For Hamsar Diversco
Bazza Design case study - Rear View Mirror with Integrated Lighting for Donne...
Bazza Design case study - Rear View Mirror with Integrated Lighting for Donne...
Bazza Design case study - Hand Held Medical Device for Omega Medical
Bazza Design case study - Hand Held Medical Device for Omega Medical
Bazza Design case study Automotive Wireless Charging Station
Bazza Design case study Automotive Wireless Charging Station
Bazza design case study ford corporate map dome lamp
Bazza design case study ford corporate map dome lamp
Recently uploaded
一比一原版(soton毕业证书)英国南安普顿大学毕业证在读证明如何办理
原版定制【微信:741003700】《(soton毕业证书)英国南安普顿大学毕业证学位证成绩单》【微信:741003700】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份毕业证【Q微信741003700】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【Q微信741003700】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
Graphic Design Tools and Software .pptx
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
按照学校原版(UIUC文凭证书)伊利诺伊大学|厄巴纳-香槟分校毕业证快速办理
出售【(UIUC毕业证书)伊利诺伊大学|厄巴纳-香槟分校毕业证】【176555708微信号】海外认证成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
【网址🎉ac123.net🎉】欧洲杯买球是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯买球。欧洲杯买球现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
原版制作(MDIS毕业证书)新加坡管理发展学院毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(MDIS毕业证书)新加坡管理发展学院毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UoN毕业证书)纽卡斯尔大学毕业证如何办理
原件一模一样【微信：WP101A】【(UoN毕业证书)纽卡斯尔大学毕业证学位证成绩单】【微信：WP101A】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：WP101A】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：WP101A】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：WP101A】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理(UoN毕业证书)纽卡斯尔大学毕业证学位证【微信：WP101A 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(UoN毕业证书)纽卡斯尔大学毕业证学位证【微信：WP101A 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(UoN毕业证书)纽卡斯尔大学毕业证学位证【微信：WP101A 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(UoN毕业证书)纽卡斯尔大学毕业证学位证【微信：WP101A 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版亚利桑那大学毕业证(UA毕业证书)如何办理
学校原件一模一样【微信：6496090】【亚利桑那大学毕业证(UA毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理亚利桑那大学毕业证(UA毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
一比一原版(Vancouver毕业证书)温哥华岛大学毕业证如何办理
学校原件一模一样【微信：6496090 】【(Vancouver毕业证书)温哥华岛大学毕业证成绩单】【微信：6496090 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微6496090
【主营项目】
一.毕业证【q微6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版肯特大学毕业证UKC成绩单一模一样
原件一模一样【微信：6496090】【肯特大学毕业证UKC学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理肯特大学毕业证UKC学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理肯特大学毕业证UKC学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理肯特大学毕业证UKC学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理肯特大学毕业证UKC学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版美国哥伦比亚大学毕业证Columbia成绩单一模一样
原件一模一样【微信：6496090】【美国哥伦比亚大学毕业证Columbia学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版南安普顿索伦特大学毕业证Southampton成绩单一模一样
原件一模一样【微信：6496090】【南安普顿索伦特大学毕业证Southampton学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Recently uploaded (20)
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
欧洲杯买球-欧洲杯买球买球网好的网站-欧洲杯买球哪里有正规的买球网站|【网址🎉ac123.net🎉】
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
Introduction to User experience design for beginner
Introduction to User experience design for beginner
Bazza Design case study - Automotive Seating for Faurecia
- 1. Case Study: Automotive Seating Design
- 2. Case Study: Automotive Seating Design 3D Design Modeling Color Rendering Program Management Project Brief: Faurecia concept automotive seating. The design featured plastic seats with ultra thin backrests and thin, high-performance seat cushions reflecting sports-shoe technology, offering comfort, safety, lower weight, recyclability, spaciousness and a new level of design freedom in the interior cabin. Injection-molded headrests and advanced seat tracks shrink weight and add safety features. Light Attitude seats are nearly 15 % lighter than conventional seats overall. I was responsible for the creation of the seat class A surface for the cushions and all photorealistic renderings.
- 3. Case Study: Automotive Seating Design 3D Design Modeling Color Rendering Program Management
- 4. Case Study: Automotive Seating Design 3D Design Modeling Color Rendering Program Management
- 5. Case Study: Automotive Seating Design 3D Design Modeling Color Rendering Program Management Close up of details
- 6. Case Study: Automotive Seating Design 3D Design Modeling Color Rendering Program Management 3D Surface Development in Alias
- 7. Case Study: Automotive Seating Design 3D Design Modeling Color Rendering Program Management Images of the working prototype The design was featured in Motor Trend
- 8. Contact Information Bazza Design LLC Barry Hutzel – Principal / Owner 2058 Breeze Drive Holland MI 49424 www.linkedin.com/in/barryhutzel/ barry.hutzel@bazzadesign.com bazzadesign.com 616 335 0219