The document provides an introduction to Arduino, an open-source hardware and software platform for building electronics projects. It describes the Arduino hardware, including various models like the Uno, Nano, and LilyPad. It also covers the Arduino programming language and integrated development environment (IDE) software. Examples are given of basic sketches to control LEDs and read serial input to adjust LED brightness.
This document provides an introduction to a class on microcontrollers with Arduino. It discusses controlling Arduino from a computer and vice versa using serial communication. It introduces servomotors and how to control their position with pulse width modulation signals from Arduino. Examples are provided for moving a servo across its full range, controlling a servo from serial input, and addressing timing issues with serial servo control. The document also covers using RGB LEDs with Arduino by controlling the pulse width modulation on three pins to mix colors. Further topics discussed include reading serial strings and potential future projects involving servos, serial communications, and piezo elements.
The document provides information about how the Arduino board works. It explains that the Arduino uses an Atmega microcontroller chip which is programmed to control inputs and outputs. A secondary chip, such as an Atmega8U2, handles the USB connection and communication between the microcontroller and computer. Supporting components like voltage regulators, capacitors, crystals and resistors work together to power the chips safely and generate the clock signal needed for programming and operation.
The document provides an overview of how an interactive device works using Arduino. It describes that an interactive device senses its environment using sensors, processes this information using software on the microcontroller, and then interacts with the world using actuators. It then gives examples of blinking an LED using Arduino code to illustrate how this process works at a basic level.
This document provides tutorials for using Arduino hardware and software. It introduces the basic Arduino hardware including boards, breadboards, LEDs, and describes how to install the Arduino software and USB drivers. The document then explains the basic structure of Arduino programs and provides tutorials for common projects like blinking an LED, using buttons, sensors, displays and more. It is intended to help beginners learn the fundamentals of using Arduino.
Arduino project that streams internet radio using an Ethernet connection.
The user selects the station by swiping an NFC tag formatted with the URL of the station.
Source code avaialable at github:
https://github.com/jmgjmg/ArduRadio
This document provides an overview of Arduino, an open-source hardware platform used for building interactive objects and prototypes. It describes Arduino as a single-board microcontroller intended to make electronics projects more accessible. Key topics covered include the Arduino programming environment, common Arduino boards and their features, examples of simple Arduino projects like blinking an LED and building a line-following robot, and comparisons to other prototyping platforms. The document encourages readers to get started with Arduino for its low cost, easy programming environment, and large community support.
The document provides an introduction to Arduino, including what Arduino is, its hardware features, the Arduino IDE for programming, and examples of basic blink programs. It discusses the Arduino community and variants, and describes shields and sensors that can be used with Arduino. Finally, it outlines several applications of Arduino like weather stations, robots, 3D printers, and more.
This document provides an introduction to a class on microcontrollers with Arduino. It discusses controlling Arduino from a computer and vice versa using serial communication. It introduces servomotors and how to control their position with pulse width modulation signals from Arduino. Examples are provided for moving a servo across its full range, controlling a servo from serial input, and addressing timing issues with serial servo control. The document also covers using RGB LEDs with Arduino by controlling the pulse width modulation on three pins to mix colors. Further topics discussed include reading serial strings and potential future projects involving servos, serial communications, and piezo elements.
The document provides information about how the Arduino board works. It explains that the Arduino uses an Atmega microcontroller chip which is programmed to control inputs and outputs. A secondary chip, such as an Atmega8U2, handles the USB connection and communication between the microcontroller and computer. Supporting components like voltage regulators, capacitors, crystals and resistors work together to power the chips safely and generate the clock signal needed for programming and operation.
The document provides an overview of how an interactive device works using Arduino. It describes that an interactive device senses its environment using sensors, processes this information using software on the microcontroller, and then interacts with the world using actuators. It then gives examples of blinking an LED using Arduino code to illustrate how this process works at a basic level.
This document provides tutorials for using Arduino hardware and software. It introduces the basic Arduino hardware including boards, breadboards, LEDs, and describes how to install the Arduino software and USB drivers. The document then explains the basic structure of Arduino programs and provides tutorials for common projects like blinking an LED, using buttons, sensors, displays and more. It is intended to help beginners learn the fundamentals of using Arduino.
Arduino project that streams internet radio using an Ethernet connection.
The user selects the station by swiping an NFC tag formatted with the URL of the station.
Source code avaialable at github:
https://github.com/jmgjmg/ArduRadio
This document provides an overview of Arduino, an open-source hardware platform used for building interactive objects and prototypes. It describes Arduino as a single-board microcontroller intended to make electronics projects more accessible. Key topics covered include the Arduino programming environment, common Arduino boards and their features, examples of simple Arduino projects like blinking an LED and building a line-following robot, and comparisons to other prototyping platforms. The document encourages readers to get started with Arduino for its low cost, easy programming environment, and large community support.
The document provides an introduction to Arduino, including what Arduino is, its hardware features, the Arduino IDE for programming, and examples of basic blink programs. It discusses the Arduino community and variants, and describes shields and sensors that can be used with Arduino. Finally, it outlines several applications of Arduino like weather stations, robots, 3D printers, and more.
Javier Montaner presented a project to build an Arduino-based device that plays internet radio streams. The device uses an Arduino Mega, Ethernet shield, MP3 shield, and NFC shield. It allows selecting radio stations using NFC tags. The project status is that a working prototype has been built. Next steps include cleaning up the code and publishing it on GitHub, replacing the Ethernet shield with a WiFi shield, and porting the solution to an Android USB dongle.
This document discusses Arduino and its history and applications. It notes that Arduino was created in 2005 as an educational open-source hardware project. It was developed by Massimo Banzi and others to provide a low-cost, easy-to-use platform for prototyping that could be used in classrooms. Arduino was built upon Wiring, an earlier open-source electronics platform, to make hardware programming more approachable. It has since grown into a large community and product line used widely for hardware prototyping, especially in IoT and home automation applications.
The document proposes an Arduino workshop to teach participants about the Arduino open-source hardware platform. The 2-day workshop would introduce Arduino hardware and software, teach programming and interfacing skills, and guide participants through hands-on mini-projects. Attendees would learn programming fundamentals and come away with an Arduino board and basic components to continue learning on their own.
Arduino Lecture 2 - Interactive Media CS4062 Semester 2 2009Eoin Brazil
CS4062 Masters in Interactive Media - Second Arduino Lecture - March 6th 2009 - University of Limerick. This lecture presents an introduction to communications and the Arduino with examples. This was aimed at a digital media / music technology masters student audience.
This is only for educational purposes. I openly declare a common courtesy to the video content owner.
It contains full tutorial as well as a video file inside the ppt file that will help you to build up a complete project.
The arduino uno is a microcontroller board based on thePramod Kumar
The document provides information about the Arduino Uno microcontroller board. It discusses the following key details:
- The Uno uses the ATmega328 microcontroller and has 14 digital input/output pins, 6 analog inputs, a USB connection, power jack, and reset button.
- It can be powered via USB or an external power source between 6-20V connected to the power jack or Vin pin.
- The board has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM for storage. Communication is supported through serial via USB or pins 0 and 1, I2C, and SPI.
- The Uno can be programmed through the USB
The document discusses Arduino, an open-source hardware platform used for building electronics projects. It notes that Arduino is a microcontroller board that can be programmed to read input and control output from various sensors and actuators. The document provides details on Arduino components, programming, common shields and expansions, applications in different domains, and its popularity as an accessible platform for physical computing.
The document discusses the Arduino prototyping platform. It was started in Italy and uses an ATmega328P microcontroller with 28 pins and a maximum speed of 20 MHz. The Arduino can be powered through a USB or DC power jack and uses a 16 MHz crystal. It has digital and analog pins and can interface with PCs or mobile devices.
The document discusses the Arduino open-source electronics prototyping platform. It describes what Arduino is, its programming environment, advantages, features, applications, and how it compares to other prototyping platforms. Arduino is an affordable and easy to use platform for creating interactive electronic projects through an open-source hardware board and software. It allows users to prototype sensors and control devices through code.
This document provides an overview of Arduino including:
- A brief history of how Arduino was created in 2005 as an open-source hardware and software platform to make electronics accessible to non-engineers.
- Examples of how Arduino is used in applications such as NASA rovers, military robots, and industry automation.
- A comparison of microcontrollers and computers showing Arduino's simpler specifications compared to full computers.
- Examples of Arduino projects like a propeller clock and examples of Arduino used in CNC machines and 3D printing.
Arduino is an open-source hardware platform for building electronics projects. It provides a programmable circuit board and software to program it. Key features include an inexpensive ($30) and easy to use board, support for both digital and analog input/output, and a large user community. Arduino boards can be used to build interactive objects, sense and control the physical world, and communicate using various protocols. Examples of Arduino projects include robots, 3D displays, sensors, and more.
The document provides information about the Arduino programming environment and hardware options. It discusses downloading the Arduino software, installing drivers, and an overview of the Arduino UNO board. It also lists several Arduino board options, shields that can expand functionality, components needed for projects like enclosures, power supplies, batteries, and various cables and breadboards.
This document summarizes an Arduino seminar report. It discusses what Arduino is, different Arduino boards, how the Arduino board works including the controller, power supply, and USB to serial converter. It also summarizes sensors that can interface with Arduino like temperature sensors and hall sensors. Finally, it provides an overview of a home automation project using Arduino and GSM to control devices remotely through SMS messages.
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. Along with ATmega328P, it consists other components such as crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller. Arduino Uno has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
Advanced view arduino projects list use arduino for projects (2)WiseNaeem
Here we will share list every month as our projects are being updated on daily basis. PDF is a good source to work offline. Most of the electronics geeks are asking the whole list of arduino projects PDF. We will offer direct PDF file download link with info of its release date , number of projects.
The basics of understanding electronics and physical interaction with Arduino presented and taught by Jörn Sandner, Prof. Franziska Hübler and Jeremy Abbett for the University of Applied Arts - Hamburg and Miami Ad School Europe.
The document discusses Arduino, an open-source electronics prototyping platform. It began in 2005 as a cheaper alternative for students to use in physical computing classes compared to other microcontroller boards. Arduino boards use a microcontroller, such as the Atmega328, and can be programmed and controlled from a computer. The Arduino software and hardware designs are open-source, allowing anyone to build upon and distribute Arduino clones and compatible boards. The Arduino platform and community have grown significantly since 2005.
This document provides an overview of embedded system design, including:
1) Embedded systems combine hardware, software, and mechanics to perform specific functions like those in smartphones and other smart devices.
2) Embedded systems are designed for single tasks unlike desktops which can perform many tasks.
3) Embedded systems are used in application areas like automotive, industrial, aerospace/defense, and consumer electronics.
Project report on embedded system using 8051 microcontrollerVandna Sambyal
The document describes a home security prototype project that was developed using an 8051 microcontroller to control various devices like LEDs, DC motors, relays and sensors. It provides details on the circuit diagram and working of the home security system, which uses components like a microcontroller, motion sensor, door sensor and siren to detect intrusion and alert users. The document also includes information on microcontrollers, their architecture, programming and how to interface them with external devices.
Project Report On Micro-controller Embedded SystemRkrishna Mishra
The document provides an overview of embedded systems and the 8051 microcontroller architecture. It discusses how embedded systems perform predefined tasks to control devices and can be optimized for size and cost. The 8051 is then introduced as a popular 8-bit microcontroller used in embedded systems. Its features include 4KB program memory, 128B data memory, 32 general purpose registers, timers, and I/O ports. Application areas of the 8051 like energy management, automobiles, and medical devices are outlined. Finally, the document describes the 8051 architecture in detail, including the pinout, programming model, and accumulator register.
Javier Montaner presented a project to build an Arduino-based device that plays internet radio streams. The device uses an Arduino Mega, Ethernet shield, MP3 shield, and NFC shield. It allows selecting radio stations using NFC tags. The project status is that a working prototype has been built. Next steps include cleaning up the code and publishing it on GitHub, replacing the Ethernet shield with a WiFi shield, and porting the solution to an Android USB dongle.
This document discusses Arduino and its history and applications. It notes that Arduino was created in 2005 as an educational open-source hardware project. It was developed by Massimo Banzi and others to provide a low-cost, easy-to-use platform for prototyping that could be used in classrooms. Arduino was built upon Wiring, an earlier open-source electronics platform, to make hardware programming more approachable. It has since grown into a large community and product line used widely for hardware prototyping, especially in IoT and home automation applications.
The document proposes an Arduino workshop to teach participants about the Arduino open-source hardware platform. The 2-day workshop would introduce Arduino hardware and software, teach programming and interfacing skills, and guide participants through hands-on mini-projects. Attendees would learn programming fundamentals and come away with an Arduino board and basic components to continue learning on their own.
Arduino Lecture 2 - Interactive Media CS4062 Semester 2 2009Eoin Brazil
CS4062 Masters in Interactive Media - Second Arduino Lecture - March 6th 2009 - University of Limerick. This lecture presents an introduction to communications and the Arduino with examples. This was aimed at a digital media / music technology masters student audience.
This is only for educational purposes. I openly declare a common courtesy to the video content owner.
It contains full tutorial as well as a video file inside the ppt file that will help you to build up a complete project.
The arduino uno is a microcontroller board based on thePramod Kumar
The document provides information about the Arduino Uno microcontroller board. It discusses the following key details:
- The Uno uses the ATmega328 microcontroller and has 14 digital input/output pins, 6 analog inputs, a USB connection, power jack, and reset button.
- It can be powered via USB or an external power source between 6-20V connected to the power jack or Vin pin.
- The board has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM for storage. Communication is supported through serial via USB or pins 0 and 1, I2C, and SPI.
- The Uno can be programmed through the USB
The document discusses Arduino, an open-source hardware platform used for building electronics projects. It notes that Arduino is a microcontroller board that can be programmed to read input and control output from various sensors and actuators. The document provides details on Arduino components, programming, common shields and expansions, applications in different domains, and its popularity as an accessible platform for physical computing.
The document discusses the Arduino prototyping platform. It was started in Italy and uses an ATmega328P microcontroller with 28 pins and a maximum speed of 20 MHz. The Arduino can be powered through a USB or DC power jack and uses a 16 MHz crystal. It has digital and analog pins and can interface with PCs or mobile devices.
The document discusses the Arduino open-source electronics prototyping platform. It describes what Arduino is, its programming environment, advantages, features, applications, and how it compares to other prototyping platforms. Arduino is an affordable and easy to use platform for creating interactive electronic projects through an open-source hardware board and software. It allows users to prototype sensors and control devices through code.
This document provides an overview of Arduino including:
- A brief history of how Arduino was created in 2005 as an open-source hardware and software platform to make electronics accessible to non-engineers.
- Examples of how Arduino is used in applications such as NASA rovers, military robots, and industry automation.
- A comparison of microcontrollers and computers showing Arduino's simpler specifications compared to full computers.
- Examples of Arduino projects like a propeller clock and examples of Arduino used in CNC machines and 3D printing.
Arduino is an open-source hardware platform for building electronics projects. It provides a programmable circuit board and software to program it. Key features include an inexpensive ($30) and easy to use board, support for both digital and analog input/output, and a large user community. Arduino boards can be used to build interactive objects, sense and control the physical world, and communicate using various protocols. Examples of Arduino projects include robots, 3D displays, sensors, and more.
The document provides information about the Arduino programming environment and hardware options. It discusses downloading the Arduino software, installing drivers, and an overview of the Arduino UNO board. It also lists several Arduino board options, shields that can expand functionality, components needed for projects like enclosures, power supplies, batteries, and various cables and breadboards.
This document summarizes an Arduino seminar report. It discusses what Arduino is, different Arduino boards, how the Arduino board works including the controller, power supply, and USB to serial converter. It also summarizes sensors that can interface with Arduino like temperature sensors and hall sensors. Finally, it provides an overview of a home automation project using Arduino and GSM to control devices remotely through SMS messages.
Arduino Uno is a microcontroller board based on 8-bit ATmega328P microcontroller. Along with ATmega328P, it consists other components such as crystal oscillator, serial communication, voltage regulator, etc. to support the microcontroller. Arduino Uno has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
Advanced view arduino projects list use arduino for projects (2)WiseNaeem
Here we will share list every month as our projects are being updated on daily basis. PDF is a good source to work offline. Most of the electronics geeks are asking the whole list of arduino projects PDF. We will offer direct PDF file download link with info of its release date , number of projects.
The basics of understanding electronics and physical interaction with Arduino presented and taught by Jörn Sandner, Prof. Franziska Hübler and Jeremy Abbett for the University of Applied Arts - Hamburg and Miami Ad School Europe.
The document discusses Arduino, an open-source electronics prototyping platform. It began in 2005 as a cheaper alternative for students to use in physical computing classes compared to other microcontroller boards. Arduino boards use a microcontroller, such as the Atmega328, and can be programmed and controlled from a computer. The Arduino software and hardware designs are open-source, allowing anyone to build upon and distribute Arduino clones and compatible boards. The Arduino platform and community have grown significantly since 2005.
This document provides an overview of embedded system design, including:
1) Embedded systems combine hardware, software, and mechanics to perform specific functions like those in smartphones and other smart devices.
2) Embedded systems are designed for single tasks unlike desktops which can perform many tasks.
3) Embedded systems are used in application areas like automotive, industrial, aerospace/defense, and consumer electronics.
Project report on embedded system using 8051 microcontrollerVandna Sambyal
The document describes a home security prototype project that was developed using an 8051 microcontroller to control various devices like LEDs, DC motors, relays and sensors. It provides details on the circuit diagram and working of the home security system, which uses components like a microcontroller, motion sensor, door sensor and siren to detect intrusion and alert users. The document also includes information on microcontrollers, their architecture, programming and how to interface them with external devices.
Project Report On Micro-controller Embedded SystemRkrishna Mishra
The document provides an overview of embedded systems and the 8051 microcontroller architecture. It discusses how embedded systems perform predefined tasks to control devices and can be optimized for size and cost. The 8051 is then introduced as a popular 8-bit microcontroller used in embedded systems. Its features include 4KB program memory, 128B data memory, 32 general purpose registers, timers, and I/O ports. Application areas of the 8051 like energy management, automobiles, and medical devices are outlined. Finally, the document describes the 8051 architecture in detail, including the pinout, programming model, and accumulator register.
Introduction to Embedded Systems and MicrocontrollersIslam Samir
The document provides an introduction to microcontrollers and embedded systems. It discusses prerequisites for the course including digital logic design and C programming. Microcontrollers allow implementing algorithms with minimized cost and power by writing efficient programs. Studying embedded systems is important for electrical engineers in Egypt to develop technical skills and compete globally. The course agenda covers topics such as embedded systems, microcontrollers, architecture, PIC microcontrollers, memory organization, and C programming.
A microcontroller is a small computer on a single integrated circuit containing a processor core, memory, and input/output peripherals. The first microcontroller, the Intel 4004, was created in 1971. Microcontrollers can be categorized by architecture (Harvard or Von Neumann) or by vendor. Programming a microcontroller involves writing code, burning the program onto the microcontroller chip using a programmer tool, and then connecting it to external devices. Microcontrollers are widely used in applications such as engine control systems, medical devices, power systems, remote controls, and more.
DevOps and Continuous Delivery Reference Architectures (including Nexus and o...Sonatype
There are numerous examples of DevOps and Continuous Delivery reference architectures available, and each of them vary in levels of detail, tools highlighted, and processes followed. Yet, there is a constant theme among the tool sets: Jenkins, Maven, Sonatype Nexus, Subversion, Git, Docker, Puppet/Chef, Rundeck, ServiceNow, and Sonar seem to show up time and again.
The document discusses the Arduino, an open-source electronics prototyping platform. It provides a brief history of how Arduino was created in 2005 to provide an affordable platform for interactive design projects. It describes the key features of the Arduino Uno board and the Arduino programming environment. Finally, it outlines some common applications of Arduino in fields like home automation, robotics, and sensor prototyping.
The document introduces Arduino, an open-source hardware platform for building electronics projects. Arduino consists of a programmable circuit board and IDE software. It is widely used due to its low cost, extensive documentation and community support. The document describes common Arduino boards like Uno and Mega, the Arduino programming language based on C/C++, and the Arduino IDE. It also discusses Arduino shields that extend the capabilities of the main board and provides examples of blinking LED projects.
The Arduino is an open-source electronics prototyping platform consisting of both a physical programmable circuit board and a piece of software called the Arduino IDE. The Arduino board features an Atmega microcontroller and can be programmed to read input and control output from various sensors and actuators. It allows users with little technical experience to create interactive electronic projects through a simplified programming language. The Arduino platform has gained popularity for its low cost, ease of use, and large user community providing many online tutorials and libraries to expand its functionality.
The document discusses the Arduino, an open-source electronics prototyping platform. It began in 2003 as a program to provide a low-cost way for students and professionals to create interactive devices. Arduino hardware typically uses a microcontroller board and can be programmed through an IDE software. Common Arduino boards include the Uno, Leonardo, and Mega. The Arduino is programmed using a Wiring-based language and IDE to easily interact with sensors, actuators and other devices through its input/output pins.
Arduino is an open-source microcontroller board designed to make electronics projects more accessible. It consists of an Atmel microcontroller and standard connectors that allow it to interface with a variety of sensors and actuators. The Arduino IDE software makes programming easy with features like syntax highlighting and the ability to compile and upload code with one click. Arduino boards can sense the environment through inputs and affect their surroundings through outputs, making the platform popular for prototyping and building interactive objects.
A microcontroller (MCU for microcontroller unit, or UC for μ-controller) is a small computer on a single integrated circuit. In modern terminology, it is similar to, but less sophisticated than, a system on a chip (SoC); an SoC may include a microcontroller as one of its components.
The document introduces the Arduino microcontroller board. It describes the Arduino as an easy-to-use and inexpensive platform for physical computing. Key components of the Arduino include an ATmega328P microcontroller, digital and analog input/output pins, a USB connection for programming, and a standard pin layout that allows connection of expansion boards. The document provides an overview of the Arduino's capabilities and use in interactive projects.
Arduino is an open-source hardware and software platform for building electronic projects and interactive objects. It consists of a circuit board with a microcontroller, and an IDE software to write and upload code. The boards can read inputs from sensors and turn them into outputs that control actuators. Arduino provides a standard format that simplifies use of microcontrollers. It allows controlling the board by sending instructions to the microcontroller via the Arduino IDE. The platform works with both the physical board and its libraries and IDE software.
This document provides an overview of examples and tutorials available for the Arduino platform. It begins with basic digital input/output and analog input examples. It then covers more complex sensors, sound, and interfacing with other hardware and software. Links are provided to additional Arduino resources including books, community documentation, and example labs from other sources.
ARDUINO OVERVIEW HARDWARE SOFTWARE AND INSTALLATION.pptxmenchc1207
The document provides an overview of the Arduino hardware and software platform. It discusses that Arduino is an open-source electronics platform that can read inputs and turn them into outputs. Some common Arduino boards are then described, including the Arduino UNO, Nano, Leonardo, and Micro. The Arduino UNO is highlighted as one of the most popular boards due to its extensive documentation and tutorials available. The key components of the Arduino UNO board are then outlined.
This document provides an overview of Arduino, an open-source electronics platform. It discusses that Arduino boards can read inputs like light or buttons and turn them into outputs like activating motors or LEDs. The Arduino programming language and IDE make it easy to write code and upload it to the board. A basic blink program is presented as an example. Key features of the Arduino UNO board are listed, including the microcontroller, memory, and input/output pins. Common applications of Arduino in robotics and IoT are mentioned, such as motion detectors and home automation.
18/03/2010 - FTS seminar series @ Cardiff Univesity, Computer Science. Pete Woznowski and Rich Coombs one hour presentation on Arduino. Some info on Arduino and the talk: Arduino is a hardware and software platform for developing electronic devices and applications, aimed at being fun and accessible to everyone. Think Lego Mindstorms, but aimed intentionally at adults (rather than aimed at children and incidentally used by adults :)). The scope and potential for Arduino is huge. It has been used to develop simple applications like pedometers and networked environmental sensors, to art exhibits and remote controlled vehicles. The talk aims to give an overview of the Arduino platform and a brief introduction to designing and programming Arduino applications, along with some demonstrations.
This document provides an overview of the Arduino open source electronics prototyping platform. It describes the history and origins of Arduino starting in 2005 at the Interactive Design Institute in Italy. Key Arduino boards are identified like the Arduino Uno, the most popular board. The features of the Arduino Uno board are outlined including its microcontroller, pins for input/output, power supply and more. The Arduino IDE software for writing and uploading code to Arduino boards is also summarized. Other open source prototyping platforms besides Arduino are mentioned but not described.
Arduino is a microcontroller board that allows users to create interactive electronic objects and prototypes. It is commonly used by artists, students, and hobbyists to build devices that can sense and control the physical world. The Arduino Uno board contains a microprocessor, memory, and input/output connections that allow it to interface with sensors, LEDs, motors, and other physical computing components. Users write code using the Arduino IDE software to program the board and control the attached devices.
Arduino is a microcontroller board that allows users to create interactive electronic objects and prototypes. It is commonly used by artists, students, and hobbyists to control devices like LED lights or robots. The Arduino Uno board features digital and analog input/output pins that can interface with sensors and actuators. It is programmed using the Arduino IDE software to write codes that can turn pins on/off or monitor pin states.
A microcontroller is a computer on a single integrated chip that contains a processor, memory, and input/output ports. Common microcontroller families include Intel, Atmel, Microchip, and ARM. Microcontrollers are used in devices like cellphones, toys, appliances, cars, and cameras.
The Arduino is an open-source hardware and software platform for building electronics projects. It consists of a microcontroller board, which can be programmed using the Arduino programming language, which is based on C/C++. The Arduino Uno is a popular Arduino board that uses the ATmega328P microcontroller. Accessories called shields can be added to Arduino boards to expand their functionality.
The
A microcontroller is a computer on a single integrated chip that contains a processor, memory, and input/output ports. Common microcontroller families include Intel, Atmel, Microchip, and ARM. Microcontrollers are used in devices like cellphones, toys, appliances, cars, and cameras. The Arduino is a popular open-source hardware and software platform for building prototypes and interactive objects. It uses a simple programming language based on C/C++ and is inexpensive and easy to use.
ARDUINO OVERVIEW HARDWARE SOFTWARE AND INSTALLATION.pdfRuby Hermano
This document provides an overview of the Arduino hardware and software platform. It discusses that Arduino is an open-source electronics platform that can read inputs and turn them into outputs. Common Arduino boards like the UNO, Nano, Leonardo and Micro are identified along with their key components and specifications. The document also explains the benefits of using Arduino including its low cost, cross-platform software, simple programming and extensible open-source hardware and software.
The Arduino document provides information on learning Arduino through examples, foundations of concepts, hacking guides, and additional links. It includes sections on examples programs, core concepts, extending Arduino hardware and software, and links to other documentation resources. A variety of examples are given to demonstrate uses of Arduino's input/output pins, analog/digital functions, communication, libraries, and interfacing with other hardware.
1) Arduino is an open-source electronics platform used for building interactive objects that can sense and control the physical world. It contains a microcontroller and can be programmed to sense input from sensors and control outputs like motors or lights.
2) The Arduino programming environment allows users to write code and upload it to an Arduino board. It was initially developed in 2005 to make electronics projects more accessible to students.
3) Popular Arduino boards include the Arduino Uno, Leonardo, and Mega. Arduino is advantageous because it is inexpensive, has a simple programming language, and has a large community of users developing sensors, modules, and applications.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Trusted Execution Environment for Decentralized Process MiningLucaBarbaro3
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Digital Marketing Trends in 2024 | Guide for Staying AheadWask
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
A Comprehensive Guide to DeFi Development Services in 2024Intelisync
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Arduino talk
1. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Arduino
Microcontrollers Made Easy
Serge Wroclawski
February 19, 2009
This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 License.
Arduino
2. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
What is Arduino?
Microcontroller Platform
Provides one standard set of assumed hardware, interfaces, etc.
Hardware
Microcontroller
IO (USB or Serial)
Power
Software
The Arduino Language
Tools to flash to Arduino
Arduino
3. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Arduino is Free/Open Source
Programming environment is all Free Software
The bootloader is Free Software
The PCB board is under a Creative Commons License
Arduino
4. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
What is Arduino used for?
Input
Sensors
Digital Input (Serial, SPI, I2C)
Output
LEDs
Displays
Speakers
Control and Communication
Drive other machinery
Directly or using a communuication protocol
Arduino
5. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
The Arduino Hardware
Arduinos differ in design but all share some basic functionality
AVR Microcontroller
Amtel AVR Mega168 or AVR Mega8 (older models)
Power Supply
Either directly or via USB power
Communications
Serial (older models)
USB (most models)
Connections to a USB interface (smaller models)
Pins for various functions
Arduino
6. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
The AVR Mega148
1 - 16Mhz CPU (20 MIPS)
1Kb SRAM
16Kb Flash (2Kb used for Arduino bootloader)
512 bytes EEPROM
14 Digital IO Pins
6 PWM Pins (included in the 14 digital)
8 Analog Input Pins (10 bit)
Arduino
7. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
The Arduino vs Do It Yourself AVR
AVR Mega148 $4
Breadboard $5
FTDI Chip/Cable $20
Parts $29 Arduino $35 assembled
In the end, you can use microcontroller outside the Arduino PCB,
so feel free to mix n match.
Arduino
8. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
The Original
First Arduino
ATA Mega8 Microcontroller
Serial Connection
No LEDs on board
Several DIPs to change
settings
Arduino
9. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Duemilanove
Current generation Arduino
Automatic DC/USB Power
Arduino
10. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
The Diecimilia
AVR Mega148
USB or DC Power via DIP
Switch
Arduino
11. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
LillyPad
2inch Arduino model
Designed to be sewen into
clothing
Uses FTDI connector (no
direct USB)
Slightly lower power
requirements than other
models
Arduino
12. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Nano
Smallest Arduino available
USB connector directly on
the unit (no FTDI cable
needed)
Arduino
13. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Boarduino
Arduino Clone from
AdaFruit
Available assembled, in parts
kit, or PCB-only
100% Arduino Compatible
(though not quite the same
HW)
Clones are legal, as long as
they don’t use Arduino
Trademark
Arduino
14. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Arduino Software
Java based IDE
Built-in Project Manager
Libraries and pre-done
projects (called sketches)
gcc-avr w/ lots of libraries
and macros under the covers
Arduino
15. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Hello World on the Arduino
int ledPin = 13; // LED connected to digital pin 13
void setup() // run once, when the sketch starts
{
pinMode(ledPin, OUTPUT); // sets the digital pin as output
}
void loop() // run over and over again
{
digitalWrite(ledPin, HIGH); // sets the LED on
delay(1000); // waits for a second
digitalWrite(ledPin, LOW); // sets the LED off
delay(1000); // waits for a second
}
Arduino
16. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Computer → Arduino →
LEDs
Adjust LED brightness
Indicator lights or a
primitive Ambient Orb
Arduino
17. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
LED Change Code (Arduino)
// Simple LED on at various power levels - Serge
char serInString[10]; // array that will hold the bytes of the incoming string
int dataRead = 0;
void setup(){
// Set up pins
Serial.begin(9600); }
void readSerialString(char *strArray) {
int i = 0;
while (Serial.available()) {
strArray[i] = Serial.read();
i++; }
dataRead = i; }
void loop() {
readSerialString(serInString);
if (dataRead>0) {
int ledPin = serInString[0];
int ledBrightness = serInString[1];
if ((ledPin>=9) && (ledPin<=11)) {
char pinChar = ’0’ + ledPin;
Serial.println("Turning on LED: " + pinChar);
analogWrite(ledPin, ledBrightness); } }
dataRead = 0;
delay(1000); }
Arduino
18. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
LED Change Code (Computer)
#!/usr/bin/env python
import serial
SERIAL = serial.Serial(’/dev/ttyUSB0’, 9600, timeout=1)
RED = 9
GREEN = 10
BLUE = 11
def setLed(led, val):
SERIAL.write(chr(led))
SERIAL.write(chr(val))
setLed(RED, 128)
setLed(GREEN, 255)
Arduino
19. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Arduino Shields
Lots of Arduino Add-Ons have been made that fit the standard
Arduino form
Ethernet
Battery
GPS
WaveSheild (lots of audio functions)
XBee
Motor Control
Phidget Sensor
Lots more!
Arduino
20. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Botanicalls
Now your plants can tell you
to water them in the only
way you’ll pay attention- on
Twitter!
Uses Ethernet Shield
Available from AdaFruit
Arduino
21. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Pocket Piano Arduino Shield
A tiny little synthesizer, 25 keys
Original page www.critterandguitari.com
Makershed page (with video) www.makershed.com
Arduino
22. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Gamepack
“Open Source Game System”
320x240 OLED Touch Screen
Lithium Battery Pack
Built it yourself! Design your own games
Only $250. Available at liquidware.com
Arduino
23. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Learning More
http://Arduino.cc
Online Tutorial
Another Tutorial
Getting Started with Arduino and Making Things Talk by
O’Reilly
Arduino Programming Notebook
Make Magazine and Instructables
Arduino and Parts at AdaFruit and MakerShed
Go to Youtube and search for Arduino
Arduino
24. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Conclusion
Electronics doesn’t have to be scary
Microcontrollers are even less scary
Small computers led to lots of cool projects
Go forth and hack!
Arduino
25. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
Questions?
Arduino
26. Introduction The Hardware Arduino Models The Software Add-Ons Projects & Kits Learning More Conclusion
License and Redistribution
The text of this presentation is Copyright Serge Wroclawski 2009 c
The images in this presentation are distributed with permission
from their authors
Redistribution of the text of this presentation is allowed under the
terms of the Creative Commons AttributionShareAlike License
Arduino