2. 6/1/2011
2
Step 1: First you have to go to Thread Consumption tool through
Start Up menu
Click Save button after
enter all required Data..
Star marked dialogue box must
fulfill along with others..
Picture can
also be added..
• Light Weight Fabrics (Shirts, Blouses, Tees, Tanks)
• Medium Weight Fabrics (Pants, Chinos, Sweaters, Fleece)
• Heavy Weight Fabrics (Denim Jeans, Overalls, Parkas)
3. 6/1/2011
3
(1)
(2)(3)
(5)
(5)
(6)(6)
(4)
(7)
Determine the Sequence of Operations for the Garment being evaluated
and write down on the Sheet.
1. Join Shoulders
2. Set Collarette
3. Tape Shoulder & Neck
4. Hem Sleeves
5. Close Sleeves
6. Set Sleeves
7. Hem Bottom
Step 1
1. Join Shoulders
ANECALC
For each operation determine the stitch type, number of rows of stitch, & the
SPI.
Step 2
4. 6/1/2011
4
For each operation determine the stitch type, number of rows of stitch, & the
SPI.
Step 2
3/16" or 4.5mm
HE
ANECALC
Stitch Drawing
Top View As Sewn Bottom View As Sewn
ISO 4915
Number
Common
Application Requirements Stitch Description
2 Needle Bottom Coverstitch Looper Thread on Bottom 406 Hemming,
Attaching, Elastic,
Binding,
Coverseaming,
Making Belt
Loops
Specify
1) Needle spacing
(1/8”, 3/16”, 1/4")
2) SPI
Stitch formed by 2-needle threads passing through the
material and interlooping with 1-looper thread with the
stitch set on the underside of the seam. Looper thread
interlooped between needle threads providing seam
coverage on the bottom side only.
3 Needle Bottom Coverstitch Looper Thread on Bottom 407 Attaching Elastic
to Men's & Boys
Knit Underwear
Specify
1) Needle spacing
(1/4")
2) SPI
Stitch formed by 3-needle threads passing through the
material and interlooping with 1-looper thread with the
stitch set on the underside of the seam. Looper thread
is interlooped between needle threads providing seam
coverage on the bottom side only.
2 Needle Chainstitch with
Cover Thread
Looper Thread on Bottom 408 Attaching Pocket
Facings to Jeans
& Chino Casual
Pants
Stitch formed by 2-needle threads passing through the
material and interlooping with 2-looper threads with
the stitches set on the underside of the seam. A top
spreader thread is interlaced on the top side of the
seam between the two needle threads.
2 Thread Overedge Single "purl" on Edge 503 Serging &
Blindhemming
Specify
1) Width Bite (Ex.
1/8", 3/16", 1/4")
2) SPI.
Stitch formed by 1-needle thread and 1-looper thread
with purl on edge of seam for serging or
blindhemming ONLY.
3 Thread Overedge Most Common Overedge
Stitch
504 Single Needle
Overedge
Seaming
Specify
1) Width Bite (Ex.
1/8", 3/16", 1/4")
2) SPI.
Stitch formed with 1-needle thread and 2-looper
threads with the looper threads forming a purl on the
edge of the seam. For overedge seaming and serging.
3 Thread Overedge Double "purl" on Edge 505 Serging with
Double purl on
Edge
Specify
1) Width Bite (Ex.
1/8", 3/16", 1/4")
2) SPI.
Stitch formed with 1-needle thread and 2-looper
threads with the looper threads forming a double purl
on the edge of the seam for serging ONLY.
Mock Safety Stitch 2 Needle Overedge 512 Seaming Stretch
Knits, Wovens
Specify SPI. Stitch formed with 2-needle threads and 2 looper
threads with the looper threads forming a purl on the
edge of the seam. 512 – right needle only enters the
upper looper loop. Stitch does NOT chain-off as well
as 514 Stitch
Find Drawings at www.amefird.com
5. 6/1/2011
5
For each operation determine the stitch type, number of rows of stitch, and SPI.Step 2
ANECALC
1. Join Shoulders
ANECALC
For each operation determine the stitch type, number of rows of stitch, & the
SPI.
Step 2
6. 6/1/2011
6
For each operation determine the length of the seam or seams included in the
operation.
Step 3
ANECALC
Continue to input the stitch type, rows of stitch, SPI, Seam Length (cm) and Needle and
bottom threads used for each operation.
ANECALC
9. 6/1/2011
9
2 Rows of 401 Chainstitch
Tape Shoulder & Neck Operation
ANECALC
12 stitches per inch
Tape Shoulder & Neck Operation
10. 6/1/2011
10
Make sure to measure the contour of the entire seam to get an accurate measure of the seam
length.
Seam length = 55cm
Tape Shoulder & Neck Operation
ANECALC
ANECALC
11. 6/1/2011
11
4. Hem Sleeves
ANECALC
SPI = 10 spi
Needle Spacing = 1/4" or 6mm
Length of Seam = 38cm X 2 since there are 2 Sleeves
Hem Sleeves
406 Stitch
ANECALC
13. 6/1/2011
13
Stitch = 504 3/16"
Rows = 1
SPI = 10
Length of Seam = 13 cm but there are 2 Sleeves
Close Sleeves
ANECALC
14. 6/1/2011
14
6. Set Sleeves
Set Sleeves
Stitch = 504 3/16"
Rows = 1
SPI = 10
Length of Seam = 60 cm but there are 2 Sleeves
15. 6/1/2011
15
ANECALC
Stitch = 406 1/4"
Rows = 1
SPI = 10
Length of Seam = 56cm X 2 = 112cm
Needle Spacing = 1/4" or 6mm
Hem Bottom
16. 6/1/2011
16
ANECALC
Step 2 : Enter all Data about all Process..
Total Consumption of Thread
can be found by Single Gmt
Consumption button..
17. 6/1/2011
17
Total Consumption of thread for a single Garments, Lot and every single process
can be printed in a PDF file..
Bartacks - you must select the length of the tack and
count the number of tacks in the operation.
18. 6/1/2011
18
Step 3 : Cost, Planning, Unused thread can calculate from Line Spread..
Md. Zubair Taufiq
01817 046982
zubair.taufiq@amefird.com.bd
