This document lists various steel and metal products including:
- Stainless steel plates, tubes, and decorative sheets
- Steel pipes including ERW, LSAW, and SSAW pipes
- Pipe fittings, hollow sections, and square tubes
- Pre-painted galvanized and galvalume steel coils and sheets
- Aluminum products and fasteners
- It provides details on materials, sizes, standards and specifications for each product category.
For construction professionals and sales personnel.
The material will take you through the basics of raw materials and coatings as well as describes how to use them in different applications. After studying the material you will:
* Know the basics of raw materials and coatings
* Know the newest products in coatings
* Get introduced to how different coatings and steel grades are used in construction applications
* Know some technical performance of the coatings
* Get a deeper overview of the two newest coating options
* Get some important tips maintenance-wise
Read more about steel coatings:
ruukki.com/colourcoatedsteels
ruukki.com/metalcoatedsteels
Cast iron is a group of iron-carbon alloys with a carbon content more than 2%. Its usefulness derives from its relatively low melting temperature. The alloy constituents affect its colour when fractured: white cast iron has carbide impurities.
History:
Cast iron was invented in China in the 5th century BC and poured into molds to make ploughshares and pots as well as weapons and pagodas. Although steel was more desirable, cast iron was cheaper and thus was more commonly used for implements in ancient China, while wrought iron or steel was used for weapons.
The cast-iron is manufactured by re-melting pig-iron with coke and limestone. This re-melting is done in a furnace known as the cupola furnace. It is more or less same as the blast furnace, but it is smaller in size. Its shape is cylindrical with diameter of about 1 m and height of about 5 m.
The working of cupola furnace is also similar to that of blast furnace. The raw materials are fed from top. The cupola furnace is worked intermittently and it is open at top. After the raw materials are placed, the furnace is fired and blast of air is forced through tuyeres. The blast of air is cold as the impurities in pig-iron are removed by the oxidation
#design #architecture #interior #homedesign #house #interiors #construction #deco #interiordesigner #designinspiration #interiorstyling #interiordecor #arquitectura #architecturephotography #kitchendesign #modern #building #architecturelovers #homestyle #bedroom #archilovers #instahome #homestyling #lighting #project #architecturedesign #villa #archdaily #moderndesign #housedesign
For construction professionals and sales personnel.
The material will take you through the basics of raw materials and coatings as well as describes how to use them in different applications. After studying the material you will:
* Know the basics of raw materials and coatings
* Know the newest products in coatings
* Get introduced to how different coatings and steel grades are used in construction applications
* Know some technical performance of the coatings
* Get a deeper overview of the two newest coating options
* Get some important tips maintenance-wise
Read more about steel coatings:
ruukki.com/colourcoatedsteels
ruukki.com/metalcoatedsteels
Cast iron is a group of iron-carbon alloys with a carbon content more than 2%. Its usefulness derives from its relatively low melting temperature. The alloy constituents affect its colour when fractured: white cast iron has carbide impurities.
History:
Cast iron was invented in China in the 5th century BC and poured into molds to make ploughshares and pots as well as weapons and pagodas. Although steel was more desirable, cast iron was cheaper and thus was more commonly used for implements in ancient China, while wrought iron or steel was used for weapons.
The cast-iron is manufactured by re-melting pig-iron with coke and limestone. This re-melting is done in a furnace known as the cupola furnace. It is more or less same as the blast furnace, but it is smaller in size. Its shape is cylindrical with diameter of about 1 m and height of about 5 m.
The working of cupola furnace is also similar to that of blast furnace. The raw materials are fed from top. The cupola furnace is worked intermittently and it is open at top. After the raw materials are placed, the furnace is fired and blast of air is forced through tuyeres. The blast of air is cold as the impurities in pig-iron are removed by the oxidation
#design #architecture #interior #homedesign #house #interiors #construction #deco #interiordesigner #designinspiration #interiorstyling #interiordecor #arquitectura #architecturephotography #kitchendesign #modern #building #architecturelovers #homestyle #bedroom #archilovers #instahome #homestyling #lighting #project #architecturedesign #villa #archdaily #moderndesign #housedesign
Properties of ceramics; Classification of ceramics; Ceramic raw material; Fabricating and processing of ceramic;Application of Ceramics; Glasses; Clay Products; Structural clay product; Whitewares; Refractories: Fireclay; Silica; Basic refractories; Special refractories; Abrasives; Cements; Advanced Ceramics
Steel is an alloy of iron and a number of other elements, mainly carbon, that has a high tensile strength and relatively low cost.
Steel is one of the most sustainable construction materials. Its strength and durability coupled to its ability to be recycled, again and again, without ever losing quality make it truly compatible with long term sustainable development.
The versatility of steel gives architects the freedom to achieve their most ambitious visions.
High carbon steel
Mild steel
Medium carbon steel
Stainless steel
high steel
Cobalt steel
Nickel chromium
Aluminium steel
Chromium steel
At its narrow upper end it has an opening through which the iron to be treated is introduced and the finished product is poured out
The wide end, or bottom, has a number of perforations through which the air is forced upward into the converter during operation.
As the air passes upward through the molten pig iron, impurities such as silicon, manganese, and carbon unite with the oxygen in the air to form oxides; the carbon monoxide burns off with a blue flame and the other impurities form slag.
Ceramics are important engineering materials from engineering applications point of view.This presentation gives briefly important properties and applications of ceramics
This lecture gives a background of the design and manufacturing processes of food and beverage cans, which are produced by drawing and drawing & ironing of rolled aluminium alloys. It draws attention to the challenge for materials and production engineers to fulfill contradicting demands and requirements for the production of cans and easy-open lids in a very competitive market. It demonstrates that optimization of all parameters, i.e. design, manufacturing and materials, has resulted in sheet metal forming processes of extremely high productivity and reliability. A good general knowledge of engineering practice and a familiarity with sheet metal forming and properties of aluminium alloys is assumed.
TALAT Lecture 3207: Solidification Defects in CastingsCORE-Materials
This lecture provides an introduction to the causes and remedies of the main solidification defects in castings. The students should be able to diagnose the major defects in castings and propose methods of preventing them. Basic knowledge of physics and foundry practice is assumed.
I hope You all like it. I hope It is very beneficial for you all. I really thought that you all get enough knowledge from this presentation. This presentation is about materials and their classifications. After you read this presentation you knowledge is not as before.
Introduction
Examples of heat resistance fibres
Ceramic materials
Ceramic fibers
Ceramic raw materials
Production
Classification of ceramic fibers
Properties of ceramic fibers
Uses of ceramic fibers
With over 100,000 users, and 2 decades of experience, Kondass, is the leader in Solar products, UPS systems and servo stabilizers.
Kondaas products are conceived and developed at world - class R&D center and manufactured at our state -of-the-art plant on completely automated process. Every day, the products, we manufacture, Service and distribute, accelerates and energizes, businesses, Industries, homes, hospitals and schools and elevates the quality of life.
Combining deep local insights, and a relentless commitment to operational excellence and values.
We help our customers to grow through reliable UPS and Solar System. We operate in extremely diverse markets, ranging from a small ups to power one computer or one small hut to large machineries or an entire Hospital. Everywhere we operate, we believe that dependable Power Systems is essential to human progress and to advancing economic growth, public health and security.
Anti-corrosion steel pipe is processed through the preservation process, which can effectively prevent or slow down the process in the transport and use of chemical or electrochemical corrosion reaction of steel pipe.
Properties of ceramics; Classification of ceramics; Ceramic raw material; Fabricating and processing of ceramic;Application of Ceramics; Glasses; Clay Products; Structural clay product; Whitewares; Refractories: Fireclay; Silica; Basic refractories; Special refractories; Abrasives; Cements; Advanced Ceramics
Steel is an alloy of iron and a number of other elements, mainly carbon, that has a high tensile strength and relatively low cost.
Steel is one of the most sustainable construction materials. Its strength and durability coupled to its ability to be recycled, again and again, without ever losing quality make it truly compatible with long term sustainable development.
The versatility of steel gives architects the freedom to achieve their most ambitious visions.
High carbon steel
Mild steel
Medium carbon steel
Stainless steel
high steel
Cobalt steel
Nickel chromium
Aluminium steel
Chromium steel
At its narrow upper end it has an opening through which the iron to be treated is introduced and the finished product is poured out
The wide end, or bottom, has a number of perforations through which the air is forced upward into the converter during operation.
As the air passes upward through the molten pig iron, impurities such as silicon, manganese, and carbon unite with the oxygen in the air to form oxides; the carbon monoxide burns off with a blue flame and the other impurities form slag.
Ceramics are important engineering materials from engineering applications point of view.This presentation gives briefly important properties and applications of ceramics
This lecture gives a background of the design and manufacturing processes of food and beverage cans, which are produced by drawing and drawing & ironing of rolled aluminium alloys. It draws attention to the challenge for materials and production engineers to fulfill contradicting demands and requirements for the production of cans and easy-open lids in a very competitive market. It demonstrates that optimization of all parameters, i.e. design, manufacturing and materials, has resulted in sheet metal forming processes of extremely high productivity and reliability. A good general knowledge of engineering practice and a familiarity with sheet metal forming and properties of aluminium alloys is assumed.
TALAT Lecture 3207: Solidification Defects in CastingsCORE-Materials
This lecture provides an introduction to the causes and remedies of the main solidification defects in castings. The students should be able to diagnose the major defects in castings and propose methods of preventing them. Basic knowledge of physics and foundry practice is assumed.
I hope You all like it. I hope It is very beneficial for you all. I really thought that you all get enough knowledge from this presentation. This presentation is about materials and their classifications. After you read this presentation you knowledge is not as before.
Introduction
Examples of heat resistance fibres
Ceramic materials
Ceramic fibers
Ceramic raw materials
Production
Classification of ceramic fibers
Properties of ceramic fibers
Uses of ceramic fibers
With over 100,000 users, and 2 decades of experience, Kondass, is the leader in Solar products, UPS systems and servo stabilizers.
Kondaas products are conceived and developed at world - class R&D center and manufactured at our state -of-the-art plant on completely automated process. Every day, the products, we manufacture, Service and distribute, accelerates and energizes, businesses, Industries, homes, hospitals and schools and elevates the quality of life.
Combining deep local insights, and a relentless commitment to operational excellence and values.
We help our customers to grow through reliable UPS and Solar System. We operate in extremely diverse markets, ranging from a small ups to power one computer or one small hut to large machineries or an entire Hospital. Everywhere we operate, we believe that dependable Power Systems is essential to human progress and to advancing economic growth, public health and security.
Anti-corrosion steel pipe is processed through the preservation process, which can effectively prevent or slow down the process in the transport and use of chemical or electrochemical corrosion reaction of steel pipe.
Good Supplier of Finned Tubes for Air Cooled Heat ExchangerAbby Zheng
Yangzhou Minyang Heat Transfer supplies various kind of air cooled heat exchanger fin tubes, such as bimetallic fin tube, extruded aluminum finned tube, L foot tension finned tube, embedded G fin tube, widely applied in air cooled heat exchanger, air fin fan cooler and air preheater tube bundle.
ASTM A335, ASTM A335 P5, ASTM A335 P5 alloy pipe, seamless steel pipes, steel pipes
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
M METAL TUBES INDIA Pvt Ltd an ISO 9001:2008 manufactures high quality Stainless Steel Tube Fittings, Instrumentation fittings and Instrumentation Valves, Valve manifolds suitable for Instrumentation, Hydraulic and Pneumatic applications in different sizes and metals such as stainless steel, Duplex Steel, Titanium, Inconel, Monel, Hastelloy and other materials according to customer's request for Industries like Gas Refineries, Fertilizer fields, Automobile, Chemical, Petrochemical Fields, Oil & Gas, Nuclear, Power generation plants, Pharmaceutical Industry, Marine Industry, Packing & Printing Industries etc
Una válvula de bola, conocida también como válvula de esfera, es un mecanismo de llave de paso que sirve para regular el flujo de un fluido canalizado y se caracteriza porque el mecanismo regulador situado en el interior es una bola perforada.
A ball valve, also known as a spherical valve, is a stopcock mechanism used to regulate the flow of a piped fluid and is characterised by having a perforated ball inside as its regulating mechanism.
ASTM A 519 Seamless mechanical tubing is manufactured from carbon and alloy steels for structural or other mechanical purposes involving machining or heat treating, where close tolerances, smooth finish, or definite physical properties are important factors. It is a cost effective alternative to DOM steel tubing.
ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
A Leading manufacturer, exporter and supplier of a wide range of electrical products and electrical components such as electrical fuse, electrical fittings, insulated rubber matting, distribution transformer and safety equipment Distribution Transformer, Distribution Transformers, Voltage Stabilizer, Electrical Isolators Switch Isolators Single Break Isolator Tilting Type, Gang Operator Switch
19. NOTE:Double length delivery is possible if requested.
DECORATIVE STAINLESS STEEL SHEET
Finish Stainless Steel Size
304/316
/201/430
Gold/rose
Gold/bronze/black/champange
/brass/blue/green
Etched
HL/no.4
Embossed
Sandblast
Vibration
Pvd Color
Coated
304/201
Gold/rose
Gold/bronze/black/champange
/brass/blue/green
1219x2438mm
1000x2000mm
Length Can Be Changeable
Length Max: 4000mm
Thickness Max: 2.0mm
Diametr No Limitation
Length Max: 3000mm
Decorative Stainless Steel Tube
Mirror Etched/hl Etched
/no.4 Etched
More Than 30 Patterns
8k Mirror
Pvd Color
Coated
Seamless Stainless Steel Tubes Welded pipe
Specification Range(mm) (6~762) x (1~40) (12.7~4800) x (1~50)
Type of Steel
Austenite,Martensite,Ferrite,
Dual phase steel,Alloy steel
and Nickel based alloy
Austenite,Martensite,Ferrite
and Dual phase steel
Executive Standards
GB,ASTM,JIS,DIN and other enterprise standard.It also can
produce according to the clients’requests.
06
20. PREPAINTED GALVANIZED &GALVALUME STEEL COIL/SHEET
1. Resistance to acid rain:
Coating protection mechanism: It is very easy to form acid rain in the high level of industrial emissions or
pollutants environment. Acidic penetration is formed in the surface of pre-painted steel, and accelerates
the corrosion, forming blistering, peeling and so on.
2. Resistance ultraviolet rays:
Coating protecting Mechanism: pre-painted sheet in ultraviolet or strong sunlight conditions, the coating
will exhibit chalking degeneration, manifested as discoloration and loss of gloss, lose paint quickly.
3. Resistance to humid heat:
Coating protecting mechanism: in hot and humid environments, high osmotic pressure of water vapor
accelerates penetration, forming the degeneration of painting film, then the corrosion of the substrate, with
the phenomenon of bubbles and peeling.
4. Resistance to low temperature:
Coating protecting mechanisms: most of the paint can keep stable processing performance above 0
degree, but at alpine region, the temperature will be below 20-40 degree, normal paint will become
brittle,bend cracking, or even lose paint, thus protection function is lost totally.
5.Anti-Fading & Anti-Staining paint formulation,, fireproofing and environmentally friendly.
GALVANIZED &GALVALUME STEEL COIL/SHEET
600-1500mm
0.15-2.3mm
ASTM A653M-04/JIS G3302/DIN EN10143/GBT2518-2008
SGCD,SGCH,Q195,DX51D
Regular/mini/zero spangle, chromated, skin pass, dry etc.
Regular/mini/zero spangle, chromated, skin pass, dry etc.
4-10MT(As required)
508mm/610mm
Width
Thickness
Operate Standard
Grade
Surface
Zink Coating
Coil Weight
Coil ID
Raw Material
Pattern
Painting and Film
Colors
Width & Thickness
Zink Coating
Coil Weight
GI,GL,Cold Roll
Customized
Customized ,PE or PVDF
refer to RAL numbers or customer sample
Within 1250mm,thickness from 0.13-1.5mm
Refer to GI or GL
4-10MT(As required)
07
21. SYNTHETIC RESIN ROOF TILES
RRT-880
Standard Length of Tile
Width
Working Width
Wave Length
Length
Purine Space
Head Lap
Thickness
2180mm/5688mm
880mm
800mm
218mm
Customize
660mm
218mm(1Wave)
2.5mm,3.0mm
Luxury 880
RRT-1050
Standard Length of Tile
Width
Working Width
Wave Length
Length
Purine Space
Head Lap
Thickness
2180mm/5688mm
1040mm
960mm
218mm
Customize
660mm
218mm(1Wave)
2.5mm,3.0mm
Classic 1040
UPVC ROOFING TILES
Wave height
Surface material
Length
Thickness
Regular Colors
Packing
25mm
ASA coated,color stable.
Customized
1.5mm,2.0mm,2.5mm,3.0mm
Red,Brown,Grey,Blue,Customized
PE bag or pallet accroding length
LOW TRAPEZOID PVC-900
Width 930mm(effective width is 840mm)
Wave height
Surface material
Length
Thickness
Regular Colors
Packing
Width
LOW TRAPEZOID-1130
25mm 40mm
ASA coated,color stable.
Customized
1.5mm,2.0mm,2.5mm,3.0mm
Red,Brown,Grey,Blue,Customized
PE bag or pallet accroding length
,
1130mm(effective width is 1050mm)
Wave height
Surface material
Length
Thickness
Regular Colors
Packing
Width
HIGH TRAPEZOID PVC-1050
40mm
ASA coated,color stable.
Customized
1.5mm,2.0mm,2.5mm,3.0mm
Red,Brown,Grey,Blue,Customized
PE bag or pallet accroding length
1150mm(effective width is 960mm)
CORRUGATED PVC-1130
Wave height
Surface material
Length
Thickness
Regular Colors
Packing
Width
25mm 40mm
ASA coated,color stable.
Customized
1.5mm,2.0mm,2.5mm,3.0mm
Red,Brown,Grey,Blue,Customized
PE bag or pallet accroding length
,
1130mm(effective width is 1050mm)
Advantage