1. The study examines the effect of polarity on material removal rate, electrode wear, and surface roughness in electrical discharge machining of stainless steel.
2. Experiments were conducted using straight and reverse polarity at various currents. Reverse polarity and higher currents produced higher material removal rates but lower surface quality.
3. Straight polarity produced lower material removal rates but better surface finish. The results indicate that polarity and current setting have significant effects and can be optimized based on priorities for material removal rate versus surface roughness.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Optimization of the Process Parameters of Wire Cut EDM - A ReviewIJSRD
The objective of this paper is to study the effect of different process parameter of wire electrical discharge machine (WEDM) process on the performance measures such as material removal rate (MRR), surface roughness, dimensional accuracy and kerf width. It is necessary to evaluate the factors that affect the productivity and efficiency of WEDM process. It will directly contribute to increase cutting speed and dimensional accuracy.
MULTI RESPONSE OPTIMISATION OF DIE SINKER EDM FOR ALSIC COMPOSITE IAEME Publication
On e of the important aspects that should be taken into consideration in the majority of manufacturing processes and, particularly, in processes related to Electrical Discharge Machining (EDM) is the correct selection of manufacturing conditions. Appropriate choice of the machining parameters and electrode material during electric discharge machining is fundamental to its performance and accuracy.
effect of electrode material and geometry on edm performance for ohns dies s...INFOGAIN PUBLICATION
Modern EDM machinery is capable of machining micro-hole, thin slots, geometrically complex or hard material components, that are precise and difficult to machine, such as heat treated tool steels, composites, super alloys, etc. The studies of an experimental investigation evaluate the effects of EDM machining parameters such as MRR, EWR and Surface Roughness with two different electrode materials. The process parameters such as Input current, Pulse on time and duty cycle keeping flushing pressure constant. The full factorial design of experiment (L25) is used to study the effects of machining parameters. Investigations indicate that the output parameters of EDM increases with the increase in input current and the best machining rates are achieved with copper with through hole electrodes, better surface roughness compare to brass electrode. A brass electrode with higher input current and maximum pulse on time resulted in more EWR compared to copper electrodes. Also the increase in MRR by copper electrode, it improves the SR during Electric Discharge Machining.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Optimization of the Process Parameters of Wire Cut EDM - A ReviewIJSRD
The objective of this paper is to study the effect of different process parameter of wire electrical discharge machine (WEDM) process on the performance measures such as material removal rate (MRR), surface roughness, dimensional accuracy and kerf width. It is necessary to evaluate the factors that affect the productivity and efficiency of WEDM process. It will directly contribute to increase cutting speed and dimensional accuracy.
MULTI RESPONSE OPTIMISATION OF DIE SINKER EDM FOR ALSIC COMPOSITE IAEME Publication
On e of the important aspects that should be taken into consideration in the majority of manufacturing processes and, particularly, in processes related to Electrical Discharge Machining (EDM) is the correct selection of manufacturing conditions. Appropriate choice of the machining parameters and electrode material during electric discharge machining is fundamental to its performance and accuracy.
effect of electrode material and geometry on edm performance for ohns dies s...INFOGAIN PUBLICATION
Modern EDM machinery is capable of machining micro-hole, thin slots, geometrically complex or hard material components, that are precise and difficult to machine, such as heat treated tool steels, composites, super alloys, etc. The studies of an experimental investigation evaluate the effects of EDM machining parameters such as MRR, EWR and Surface Roughness with two different electrode materials. The process parameters such as Input current, Pulse on time and duty cycle keeping flushing pressure constant. The full factorial design of experiment (L25) is used to study the effects of machining parameters. Investigations indicate that the output parameters of EDM increases with the increase in input current and the best machining rates are achieved with copper with through hole electrodes, better surface roughness compare to brass electrode. A brass electrode with higher input current and maximum pulse on time resulted in more EWR compared to copper electrodes. Also the increase in MRR by copper electrode, it improves the SR during Electric Discharge Machining.
Optimization of Process Parameters in Wire Electrical Discharge Machining of ...IJERA Editor
Wire electrical discharge machining (WEDM) is a specialized thermal machining process capable of accurately machining parts with varying hardness or complex shapes, which have sharp edges that are very difficult to be machined by the main stream machining processes. This practical technology of the WEDM process is based on the conventional EDM sparking phenomenon utilizing the widely accepted non-contact technique of material removal. Since the introduction of the process, WEDM has evolved from a simple means of making tools and dies to the best alternative of producing micro-scale parts with the highest degree of dimensional accuracy and surface finish quality. Metal matrix composites are advanced materials having high specific strength, good wear resistance, and high thermal expansion coefficient. To achieve this task, machining parameters such as pulse on time, pulse off time, peak current, servo voltage, wire feed, wire tension etc. of this process should be selected such that optimal value of their performance measures like Material Removal Rate (MRR), Surface Roughness (SR), Gap current, Dimensional deviation, etc. can be obtained or improved. In past decades, intensive research work had been carried out by different researchers for improvement and optimization of WEDM performance measures using various optimization techniques like Taguchi, Response Surface Methodology (RSM), Artificial Neural Network (ANN), Genetic Algorithm (GA), etc. This paper also highlights the feasibility of the different control strategies of obtaining the optimal machining conditions. This literature review helps to identify the suitable process parameters and their ranges in machining of metal matrix composites.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Investigation And Optimization Of EDM Process Of AISI 4140 Alloy Steel Using ...IJERA Editor
The purpose of this research work is to determine the optimized settings of key machining factors like pulse on
time, discharge current and duty cycle for AISI 4140 alloy steel using various tool electrodes. The output
responses will be measured are material removal rate (MRR),surface roughness(SR) and tool wear rate(TWR).
Mathematical models are proposed for the above are L27 orthogonal array. The micro structural changes in the
work piece after machining process will also be examined by the use of SEM.
Material Removal Rate, Tool Wear Rate and Surface Roughness Analysis of EDM P...ijsrd.com
Electrical discharge machining (EDM) is one of the non-traditional machining processes, based on thermo electric energy between the work piece and an electrode. In this process, the material removal is occurred electro thermally by a series of successive discrete discharges between electrode and the work piece. The parametric analysis of the EDM process by using different electrode materials has been carried out. The Material Removal Rate (MRR), Tool Wear Rate (TWR) and Surface Roughness (SR) is measured and recorded for detailed analysis. Different electrode
ELECTRO CHEMICAL MACHINING AND ELECTRICAL DISCHARGE MACHINING PROCESSES MICRO...ijiert bestjournal
Nowadays,necessity of small components is a common trend. These requirements encourage the researcher s to develop very minutest size components to fulfill the demand. The manufact uring of these type of components is a difficult ob ligation and for that various machining methods are develop to manufacture such c omponents. In this article the Electro Chemical mac hining and Electrical Discharge Machining is reviewed. We tried to summar ize the work of various researchers. The study show s that this type of machining processes gives good alternative.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
A Literature Review on Effect of Machining Parameters in Wire - EDMijsrd.com
The recent upgradation of newer and harder materials has made the machining task in WEDM quite challenging. Thus for the optimum use of all the resources it is essential to make the optimum use of parameters to get the best output to increase the productivity. Advances in technology have impacted with an increased cutting speed and tight tolerances in WEDM. This paper reviews the various notable works in field of WEDM and magnifies on effect of machining parameters on MRR, kerf width and surface roughness.
Electro Discharge Machining (EDM) is a
non-traditional machining process, based on thermo electric
energy between the work piece and electrode. In this process,
the material removal is occurred electro thermally by a series
of successive discrete discharges between electrode and the
work piece. Electro Discharge Machine which has the ability to
machine hard, difficult to machine material and parts with
internal complex shape by using precisely controlled sparks
that occurs between electrode and work piece in the presence
of dielectric fluid. This spark removes material from both work
piece and electrode. Material Removal Rate (MRR) is of
crucial importance in this process. In this research experiment
has been done along with Copper and Graphite tool material as
well as Mild Steel and Aluminium material has been used as
work piece. Three major Control Parameters named as
Electrode Speed (V), Current (I) and Depth of Cut (h) are
considered to determine their influence on MRR. In this
experiment three levels of each parameter has been taken and
an analysis has been made to find out the influence of control
parameters on MRR using S/N Ratio and ANOVA Analysis
Electrical discharge machining of the composites a literature revieweSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Investigation of Process Parameters for Optimization of Surface Roughness in ...IJERA Editor
Surface roughness has significant effect on functionality and service life of components. If surface roughness is properly controlled then, performance of the component enhances in operational applications. Surface roughness becomes key concern when intricate profiles and shapes are required to be manufactured in components. The objective of the paper is to bring up an adequate surface roughness in finish cut by optimizing process variables. If initial surface form is obtained by proper control of machining parameters then additional finishing efforts and lead time reduce a lot. In the industrial tool room survey availability of machining data is prime concern in terms of tuned process parameter for precision machining. Optimization of process parameters is essential in order to arrest surface roughness and thereby improve surface textures. Experimental investigations are performed to study the effect of pulse current, pulse on time and gap voltage on response of surface roughness, in case of ram EDM. Design of experimentation (DOE) and ANOVA are carried out for optimization of process parameters, within work interval of finish cut machining
Optimization of Process Parameters in Wire Electrical Discharge Machining of ...IJERA Editor
Wire electrical discharge machining (WEDM) is a specialized thermal machining process capable of accurately machining parts with varying hardness or complex shapes, which have sharp edges that are very difficult to be machined by the main stream machining processes. This practical technology of the WEDM process is based on the conventional EDM sparking phenomenon utilizing the widely accepted non-contact technique of material removal. Since the introduction of the process, WEDM has evolved from a simple means of making tools and dies to the best alternative of producing micro-scale parts with the highest degree of dimensional accuracy and surface finish quality. Metal matrix composites are advanced materials having high specific strength, good wear resistance, and high thermal expansion coefficient. To achieve this task, machining parameters such as pulse on time, pulse off time, peak current, servo voltage, wire feed, wire tension etc. of this process should be selected such that optimal value of their performance measures like Material Removal Rate (MRR), Surface Roughness (SR), Gap current, Dimensional deviation, etc. can be obtained or improved. In past decades, intensive research work had been carried out by different researchers for improvement and optimization of WEDM performance measures using various optimization techniques like Taguchi, Response Surface Methodology (RSM), Artificial Neural Network (ANN), Genetic Algorithm (GA), etc. This paper also highlights the feasibility of the different control strategies of obtaining the optimal machining conditions. This literature review helps to identify the suitable process parameters and their ranges in machining of metal matrix composites.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Investigation And Optimization Of EDM Process Of AISI 4140 Alloy Steel Using ...IJERA Editor
The purpose of this research work is to determine the optimized settings of key machining factors like pulse on
time, discharge current and duty cycle for AISI 4140 alloy steel using various tool electrodes. The output
responses will be measured are material removal rate (MRR),surface roughness(SR) and tool wear rate(TWR).
Mathematical models are proposed for the above are L27 orthogonal array. The micro structural changes in the
work piece after machining process will also be examined by the use of SEM.
Material Removal Rate, Tool Wear Rate and Surface Roughness Analysis of EDM P...ijsrd.com
Electrical discharge machining (EDM) is one of the non-traditional machining processes, based on thermo electric energy between the work piece and an electrode. In this process, the material removal is occurred electro thermally by a series of successive discrete discharges between electrode and the work piece. The parametric analysis of the EDM process by using different electrode materials has been carried out. The Material Removal Rate (MRR), Tool Wear Rate (TWR) and Surface Roughness (SR) is measured and recorded for detailed analysis. Different electrode
ELECTRO CHEMICAL MACHINING AND ELECTRICAL DISCHARGE MACHINING PROCESSES MICRO...ijiert bestjournal
Nowadays,necessity of small components is a common trend. These requirements encourage the researcher s to develop very minutest size components to fulfill the demand. The manufact uring of these type of components is a difficult ob ligation and for that various machining methods are develop to manufacture such c omponents. In this article the Electro Chemical mac hining and Electrical Discharge Machining is reviewed. We tried to summar ize the work of various researchers. The study show s that this type of machining processes gives good alternative.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
A Literature Review on Effect of Machining Parameters in Wire - EDMijsrd.com
The recent upgradation of newer and harder materials has made the machining task in WEDM quite challenging. Thus for the optimum use of all the resources it is essential to make the optimum use of parameters to get the best output to increase the productivity. Advances in technology have impacted with an increased cutting speed and tight tolerances in WEDM. This paper reviews the various notable works in field of WEDM and magnifies on effect of machining parameters on MRR, kerf width and surface roughness.
Electro Discharge Machining (EDM) is a
non-traditional machining process, based on thermo electric
energy between the work piece and electrode. In this process,
the material removal is occurred electro thermally by a series
of successive discrete discharges between electrode and the
work piece. Electro Discharge Machine which has the ability to
machine hard, difficult to machine material and parts with
internal complex shape by using precisely controlled sparks
that occurs between electrode and work piece in the presence
of dielectric fluid. This spark removes material from both work
piece and electrode. Material Removal Rate (MRR) is of
crucial importance in this process. In this research experiment
has been done along with Copper and Graphite tool material as
well as Mild Steel and Aluminium material has been used as
work piece. Three major Control Parameters named as
Electrode Speed (V), Current (I) and Depth of Cut (h) are
considered to determine their influence on MRR. In this
experiment three levels of each parameter has been taken and
an analysis has been made to find out the influence of control
parameters on MRR using S/N Ratio and ANOVA Analysis
Electrical discharge machining of the composites a literature revieweSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Investigation of Process Parameters for Optimization of Surface Roughness in ...IJERA Editor
Surface roughness has significant effect on functionality and service life of components. If surface roughness is properly controlled then, performance of the component enhances in operational applications. Surface roughness becomes key concern when intricate profiles and shapes are required to be manufactured in components. The objective of the paper is to bring up an adequate surface roughness in finish cut by optimizing process variables. If initial surface form is obtained by proper control of machining parameters then additional finishing efforts and lead time reduce a lot. In the industrial tool room survey availability of machining data is prime concern in terms of tuned process parameter for precision machining. Optimization of process parameters is essential in order to arrest surface roughness and thereby improve surface textures. Experimental investigations are performed to study the effect of pulse current, pulse on time and gap voltage on response of surface roughness, in case of ram EDM. Design of experimentation (DOE) and ANOVA are carried out for optimization of process parameters, within work interval of finish cut machining
Literature Review on Electrical Discharge Machining (EDM)
Research Paper Published by:
Vishal Kumar Jaiswal
M.Tech (Production and Industrial Engineering)
Paper Source:
http://ijsrd.com/articles/IJSRDV6I50167.pdf
http://ijsrd.com/Article.php?manuscript=IJSRDV6I50167
THE EFFECTS OF MACHINING PARAMETERS ON SURFACE ROUGHNESS OF MATERIAL EN-31 IN...ijiert bestjournal
The paper represent the work done for making mathematical models fo r analysis of the effects of machining parameters on the performance characteristics in EDM process of Alloy steel (EN-31). The mathematical models are developed using the response surface methodology (RSM) to explai n the influences of machining parameters on the performance characteristics in the EDM process.
Optimization of EDM Process Parameters using Response Surface Methodology for...ijtsrd
The present work demonstrates the optimization process of material removal rate MRR of electrical discharge machining EDM by RSM Response Surface Methodology . The work piece material was EN31 tool steel. The pulse on time, pulse off time, pulse current and voltage were the control parameters of EDM. RSM method was used to design the experiment using rotatable central composite design as this is the most widely used experimental design for modeling a second–order response surface. The process has been successfully modeled using response surface methodology RSM and model adequacy checking is also carried out using Minitab software. The second order response models have been validated with analysis of variance. Finally, an attempt has been made to estimate the optimum machining conditions to produce the best possible responses within the experimental constraints. Dr. N. Mahesh Kumar | Mr. P. Chinna Rao ""Optimization of EDM Process Parameters using Response Surface Methodology for AISI D3 Steel"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23535.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23535/optimization-of-edm-process-parameters-using-response-surface-methodology-for-aisi-d3-steel/dr-n-mahesh-kumar
Analysis of Machining Characteristics of Cryogenically Treated Die Steels Usi...IJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
MULTI OBJECTIVE OPTIMIZATION OF NEAR-DRY EDM PROCESS USING RESPONSE SURFACE M...IAEME Publication
The correct selection of manufacturing technique is one of the most important aspects to take into consideration in the majority of manufacturing processes and particularly in processes related to Electrical Discharge Machining (EDM). It is capable of machining geometrically complex or hard
material components, which are precise and difficult-to-machine such as heat treated tool steels, composites, super alloys, ceramics, carbides, heat resistant steels etc. being widely used in die and mold making industries, aerospace, aeronautics and nuclear industries.
Experimental Investigation of Process Parameters on Inconel 925 for EDM Proce...Vishal Kumar Jaiswal
Experimental Investigation of Process Parameters on Inconel 925 for EDM Process by using Taguchi Method
Research Paper Published by:
Vishal Kumar Jaiswal
M.Tech (Production and Industrial Engineering)
Paper Source:
http://www.ijsrd.com/articles/IJSRDV6I50198.pdf
http://ijsrd.com/Article.php?manuscript=IJSRDV6I50198
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...IJERA Editor
Electro discharge machining (EDM) has been recognized as an efficient method of producing dies and machining of hard material such as ceramics and high strength metal matrix composites for the modern metal industry (1). In this process the metal are remove through melting or vaporization of job metal by high frequency spark discharge. Although in this process the metal removal rate is lower than the other non-conventional machining process. But the dimensional accuracy is higher than the other process and more complex shape can be produce generally composite material are fascinated as thy exhibit exceptional mechanical and physical properties such as high strength, high hardness, and high density at elevated temperature. For this extra ordinary behavior it has wide range of application on the metal industries like aerospace, dies or mould making industries, automobiles industries etc. The metal removal rate (M.R.R.) and surface smoothness not only depend on the selection of tool material also depend on the number of input parameter (such-input current, voltage, spindle speed, duty factor, dielectric medium), job metal property (conductivity ,hardness, strength, density etc.),machine condition and machining condition(machine performances, temperature, depth of cut or area of cut etc.). It is most difficult to select machining condition for optimal performances due to large number of parameters and inherent complexity of material removal mechanism taking place in EDM process. In the present work, the experiments were conducted using Taguchi L9 orthogonal approach, to ascertain the effect of EDM process parameters on material removal rate (MRR) of stain less steel and cast iron by using tool material such copper and graphite.
MODELING AND OPTIMIZATION OF EDM PROCESS PARAMETERS: A REVIEWIAEME Publication
Electrical discharge machining (EDM) is one of the earliest non-traditional machining processes. EDM process is based on thermo electric energy between the work piece and an electrode. There are different input parameters which influence on the outputs such as MRR, TWR and SR.
Optimization is one of the techniques used in manufacturing sectors to arrive for the best manufacturing conditions, which is an essential need for industries towards manufacturing of quality products at lower cost.
An Electrode Shape Configuration on the Performance of Die Sinking Electric D...IJERA Editor
Electrical discharge machining (EDM) is one of the non-traditional machining processes, based on thermo electric energy
between the work piece and an electrode. In this process, the material removal is occurred electro thermally by a series of
successive discrete discharges between electrode and the work piece. The parametric analysis of the EDM process by using
different electrode shapes has been carried out. This Research discusses the performance of die sinking EDM due to the
shape configuration of the electrode. The effect of electrode shapes configuration on the performance of die sinking electric
discharge machine has been carried out. The optimization of the parameters of the EDM machining has been carried out by
using the taguchi‟s method for design of experiments (DOE). In this research we have used taguchi‟s method for design of
experiments with three input parameters and their three levels of experiments. The dielectric used is kerosene diluted with
water. The objective of the analysis is to optimize the process parameters of EDM with the help of taguchi method and using
Minitab software.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
What are the main advantages of using HR recruiter services.pdfHumanResourceDimensi1
HR recruiter services offer top talents to companies according to their specific needs. They handle all recruitment tasks from job posting to onboarding and help companies concentrate on their business growth. With their expertise and years of experience, they streamline the hiring process and save time and resources for the company.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder