This document summarizes and reviews several research papers that analyze the behavior and performance of multi-story buildings with different slab arrangements (conventional, flat, waffle, grid) under seismic and wind loads using ETABS software. The key findings are:
1) Flat slabs generally perform better than other slab types, with lower base shear and story displacement.
2) Grid slabs are more economical than conventional slabs but have higher deflections.
3) Sloping ground reduces seismic weight and base shear compared to level ground, but story drift is higher on level ground.
4) Secondary beams increase story displacement and should be avoided for large span slabs needing better seismic performance.
5)
A Review on Analysis of a Tall Structure with Shear Panel and Floating Columnsijtsrd
For effective design and good construction practises of multistory buildings, numerous prior studies have been conducted. When an earthquake strikes a palace, seismic stresses are produced at the buildings floor level. A variety of structure damage was seen after the earthquake. This study was conducted in seismic zone IV. In this work, we examine how tall structures with and without floating columns behave seismically. There are various situations in multistory buildings when it may be difficult to place a column in a certain spot.This study compares two multistory buildings, one of which supports its columns directly from the ground, and the other of which has floating columns in various locations. We prepared the model for the same height, the same plan, and the same loading condition for this analysis using the Staad Pro software. We are using an 11 story building with a 33.8 meter overall height and a layout that measures 18.92 by 19.78 metres for our analysis. There are 50 columns in the building, and 12 of them are supported by ground floor beams rather than the ground.These columns are termed as floating columns. We are providing a shear panels in those locations where the columns are supported. This shear wall transfers the load coming from the floating columns to the wall supporting columns. By considering these conditions we analysis both structures and find out the results of using floating columns in the same building. In this analysis to comparison of behavior of tall buildings using with and without floating column is concluded on parameters maximum beam moment, maximum beam shear and maximum nodal deflection and volume of concrete and volume of steel . By considering these conditions we analysis both structures and find out the results of using floating columns in the same building. Munish Kumar Singh | Prof. Afzal Khan "A Review on Analysis of a Tall Structure with Shear Panel and Floating Columns" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-2 , April 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57440.pdf Paper URL: https://www.ijtsrd.com.com/engineering/civil-engineering/57440/a-review-on-analysis-of-a-tall-structure-with-shear-panel-and-floating-columns/munish-kumar-singh
A Review on Analysis of a Tall Structure with Shear Panel and Floating Columnsijtsrd
For effective design and good construction practises of multistory buildings, numerous prior studies have been conducted. When an earthquake strikes a palace, seismic stresses are produced at the buildings floor level. A variety of structure damage was seen after the earthquake. This study was conducted in seismic zone IV. In this work, we examine how tall structures with and without floating columns behave seismically. There are various situations in multistory buildings when it may be difficult to place a column in a certain spot.This study compares two multistory buildings, one of which supports its columns directly from the ground, and the other of which has floating columns in various locations. We prepared the model for the same height, the same plan, and the same loading condition for this analysis using the Staad Pro software. We are using an 11 story building with a 33.8 meter overall height and a layout that measures 18.92 by 19.78 metres for our analysis. There are 50 columns in the building, and 12 of them are supported by ground floor beams rather than the ground.These columns are termed as floating columns. We are providing a shear panels in those locations where the columns are supported. This shear wall transfers the load coming from the floating columns to the wall supporting columns. By considering these conditions we analysis both structures and find out the results of using floating columns in the same building. In this analysis to comparison of behavior of tall buildings using with and without floating column is concluded on parameters maximum beam moment, maximum beam shear and maximum nodal deflection and volume of concrete and volume of steel . By considering these conditions we analysis both structures and find out the results of using floating columns in the same building. Munish Kumar Singh | Prof. Afzal Khan "A Review on Analysis of a Tall Structure with Shear Panel and Floating Columns" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-7 | Issue-2 , April 2023, URL: https://www.ijtsrd.com.com/papers/ijtsrd57440.pdf Paper URL: https://www.ijtsrd.com.com/engineering/civil-engineering/57440/a-review-on-analysis-of-a-tall-structure-with-shear-panel-and-floating-columns/munish-kumar-singh
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.