An Optimization of pallet weight is an key point to be considered for lean manufacturing,cost reduction & effective operations. An effort for optimization of pallets has been carried out by many researchers using various methods considering static& dynamic loading conditions.
DESIGN AND OPTIMIZATION OF CRITICAL PART OF A ROTARY TABLE USED IN HORIZONTAL...IAEME Publication
Growing industry demands low manufacturing cost, saving of material, low cost material, ease of transportation etc. This demand leads to use different type of material and various techniques to increase productivity.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
finite element analysis & design optimization of material handling equipmentINFOGAIN PUBLICATION
Material handling equipment is mechanical equipment used for the movement, storage, control products throughout the process of manufacturing, and disposal. The different types of material handling equipment can be classified into four major categories, transport equipment, positioning equipment, unit load formation equipment, and storage equipment. Excavator is used to excavate the material of the ground on which the machine rests and load it into trucks or tractor. In the severe working conditions, excavator parts are subjected to very high loads. The excavator mechanism must work reliably under random working conditions. Thus it is very much essential for the designers to evaluate not only a equipment of maximum reliability but also of minimum weight and cost, considering design safe under all loading conditions. It can be accomplished that, mechanical strength analysis is an important to step in the design of excavator parts. Finite Element Analysis (FEA) is the most appropriate technique in strength calculations of the structures working under known load and boundary conditions. In general, computer aided drawing model of the parts to be analyzed must to be set prior to the FEA. It is also promising to reduce the weight of the mechanism by performing optimization in FEA. This paper provides the platform for proceeding for the Modeling, FEA and optimization of backhoe excavator attachment, which was already carried out by other researchers for their related applications and it can be very helpful for development of any material handling equipment and new excavator attachment.
General stiffness model for five-axis CNC machiningIJRES Journal
Five-axis CNC machining has become an important method for processing thin-walled parts. However, compared with the traditional three-axis machine system, the tool path planning becomes more difficult especially in high-speed and accuracy machining process. In this paper, taking into consideration the rigidity establishes a general stiffness model in order to increase the surface quality, restrain the chatter of the machine and provide a reference for tool path planning. The model considerate the comprehensive impact of the tool posture, tool overhang length, transmission axis of the machine and the parts, in which the finite element method and the principal of virtual-work are applied.
Design, analysis and development of special purpose machine to carry heavy lo...eSAT Journals
Abstract
In the olden days very complicated thing is in the industry is to carry heavy loaded components and lifting from one place to another place, human effort needs lots of energy and it takes more time for same work, there are many huge and large amount of load lifting machine available, in that first started with gantry hoist and gantry cranes with which they carry heavy loads from one place to other, it works so far by the time but it can operate only in open place, in small scale industries it can’t work, during the period the need is new machine which works in small scale industries with good time, the changing the generation with the new technology industries are planned to develop the special purpose machine which is used to lift the heavy loads. Structural analysis of the “Gantry Structure” has been carried out to find the mechanical response of the structure, subjected to applied loads and boundary conditions. The results include deformed shape of the structure, displacements at required locations. Modal analysis done for checking the model, Gravity Loading Applied for different position and checked for the deformation of Solid Beam for different position. Optimization is done to reduce the cost of the structure. The response of the structure got by structural analysis using MSC Nastran.
Keywords: Gantry, Types of gantry, Structural analysis, optimization, modal analysis, HyperMesh, NASTRAN.
DESIGN AND OPTIMIZATION OF CRITICAL PART OF A ROTARY TABLE USED IN HORIZONTAL...IAEME Publication
Growing industry demands low manufacturing cost, saving of material, low cost material, ease of transportation etc. This demand leads to use different type of material and various techniques to increase productivity.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
finite element analysis & design optimization of material handling equipmentINFOGAIN PUBLICATION
Material handling equipment is mechanical equipment used for the movement, storage, control products throughout the process of manufacturing, and disposal. The different types of material handling equipment can be classified into four major categories, transport equipment, positioning equipment, unit load formation equipment, and storage equipment. Excavator is used to excavate the material of the ground on which the machine rests and load it into trucks or tractor. In the severe working conditions, excavator parts are subjected to very high loads. The excavator mechanism must work reliably under random working conditions. Thus it is very much essential for the designers to evaluate not only a equipment of maximum reliability but also of minimum weight and cost, considering design safe under all loading conditions. It can be accomplished that, mechanical strength analysis is an important to step in the design of excavator parts. Finite Element Analysis (FEA) is the most appropriate technique in strength calculations of the structures working under known load and boundary conditions. In general, computer aided drawing model of the parts to be analyzed must to be set prior to the FEA. It is also promising to reduce the weight of the mechanism by performing optimization in FEA. This paper provides the platform for proceeding for the Modeling, FEA and optimization of backhoe excavator attachment, which was already carried out by other researchers for their related applications and it can be very helpful for development of any material handling equipment and new excavator attachment.
General stiffness model for five-axis CNC machiningIJRES Journal
Five-axis CNC machining has become an important method for processing thin-walled parts. However, compared with the traditional three-axis machine system, the tool path planning becomes more difficult especially in high-speed and accuracy machining process. In this paper, taking into consideration the rigidity establishes a general stiffness model in order to increase the surface quality, restrain the chatter of the machine and provide a reference for tool path planning. The model considerate the comprehensive impact of the tool posture, tool overhang length, transmission axis of the machine and the parts, in which the finite element method and the principal of virtual-work are applied.
Design, analysis and development of special purpose machine to carry heavy lo...eSAT Journals
Abstract
In the olden days very complicated thing is in the industry is to carry heavy loaded components and lifting from one place to another place, human effort needs lots of energy and it takes more time for same work, there are many huge and large amount of load lifting machine available, in that first started with gantry hoist and gantry cranes with which they carry heavy loads from one place to other, it works so far by the time but it can operate only in open place, in small scale industries it can’t work, during the period the need is new machine which works in small scale industries with good time, the changing the generation with the new technology industries are planned to develop the special purpose machine which is used to lift the heavy loads. Structural analysis of the “Gantry Structure” has been carried out to find the mechanical response of the structure, subjected to applied loads and boundary conditions. The results include deformed shape of the structure, displacements at required locations. Modal analysis done for checking the model, Gravity Loading Applied for different position and checked for the deformation of Solid Beam for different position. Optimization is done to reduce the cost of the structure. The response of the structure got by structural analysis using MSC Nastran.
Keywords: Gantry, Types of gantry, Structural analysis, optimization, modal analysis, HyperMesh, NASTRAN.
EShape Optimization Of A Suspension Bellcrank Using 3d Finite Element MethodsIJERA Editor
The paper represents an application of an optimization procedure for a mass and stress optimization of the bellcrank of a double wishbone suspension system of SRM University’s FormulaSAE vehicle. The used optimization procedure, so-called Fully Stressed Design, is based on an indirect approach utilizing optimum criteria. The aim of the optimization was to achieve the lowest possible mass of the construction taking into consideration the allowed resistance and also to investigate and analyze the structural stress distribution of bellcrank at the real time condition during damping process and the spring actuation.
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...IJMER
Robot guns are being increasingly employed in automotive manufacturing to replace
risky jobs and also to increase productivity. Using a single robot for a single operation proves to be
expensive. Hence for cost optimization, multiple guns are mounted on a single robot and multiple
operations are performed. Robot Gun structure is an efficient way in which multiple welds can be done
simultaneously. However mounting several weld guns on a single structure induces a variety of
dynamic loads, especially during movement of the robot arm as it maneuvers to reach the weld
locations. The primary idea employed in this paper, is to model those dynamic loads as equivalent G
force loads in FEA. This approach will be on the conservative side, and will be saving time and
subsequently cost efficient. The approach of the paper is towards creating a standard operating
procedure when it comes to analysis of such structures, with emphasis on deploying various technical
aspects of FEA such as Non Linear Geometry, Multipoint Constraint Contact Algorithm, Multizone
meshing .
ER Publication,
IJETR, IJMCTR,
Journals,
International Journals,
High Impact Journals,
Monthly Journal,
Good quality Journals,
Research,
Research Papers,
Research Article,
Free Journals, Open access Journals,
erpublication.org,
Engineering Journal,
Science Journals,
Static Analysis of Go-Kart Chassis by Analytical and Solid Works SimulationIJMER
This paper aims to do modelling, simulation and performing the static analysis of a go
kart chassis consisting of Circular beams. Modelling, simulations and analysis are performed using 3-D
modelling software i.e. Solid Works and ANSYS according to the rulebook provided by Indian Society of
New Era Engineers (ISNEE) for National Go Kart Championship (NGKC-14).The maximum deflection is
determined by performing static analysis. Computed results are then compared to analytical calculation,
where it is found that the location of maximum deflection agrees well with theoretical approximation but
varies on magnitude aspect.
Failure analysis and redesign of shaft of overhead craneLaukik Raut
This paper deals with the failure analysis and redesign of shaft of overhead crane having capacity 25 tonne.
There is problem of failure of the shaft in gear box which is mounted on the crane. The shaft breakage occurred
due to dynamic, alternating low tensile– compressive stresses and simultaneous torsional load.
An overhead crane is mechanical equipment for lifting and lowering a load and moving it horizontally, with the
hoisting mechanism which is an integral part of the machine.
To carry out the failure analysis of shaft it is necessary to model the shaft in any modelling software like PROE, CATIA etc. Then analysis of existing shaft is done analytically and with ANSYS11. The shaft is then
redesigned with suitable material available in data book of machine design and then analysis of new design of
shaft is done with the help of ANSYS-11 software.
Design and Implementation of Conveyor Belt Speed Control using PID for Indust...ijtsrd
A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Many kinds of conveying systems are available, and are used according to the various needs of different industries. The purpose of this project is to improve the existing conveyor machine that located at the methodology lab in AL FALAH UNIVERSITY. This paper gives a review of the belt conveyor technology that focuses on the types of drives and the control system or the controller of the belt conveyor using PID controller. This paper highlights the characteristics, performance measure, requirements and the operational procedure of the belt conveyor drives and control systems. Muhammad Shahid | Md Ghaysuddin "Design and Implementation of Conveyor Belt Speed Control using PID for Industrial Applications" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25294.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/25294/design-and-implementation-of-conveyor-belt-speed-control-using-pid-for-industrial-applications/muhammad-shahid
STRUCTURAL OPTIMIZATION OF A POWERED INDUSTRIAL LIFT TRUCK FRAMEIAEME Publication
The purpose of this paper is to re-design a lift truck frame (Chassis) with the optimum mass while maintaining stress constraints. The paper also demonstrate how Optimization techniques can be applied mainly when product is already launched in market and optimized design is to be implemented without altering any existing assembly fitment parameters /functional requirement.
Abstract 3D Printing is a process of manufacturing the product on the layer by layer. And it is best processes for producing a finished objects. It was started in 1980‟s with the invention of stereo lithography. It has gone through various ups and downs throughout its development and rejection of new technologies. In this paper, we h3ave summarized the printing of hollow compounds with different shapes. Applications of 3D printed hollow compounds are turbine blades, gears, disc brakes etc. One of the major application of 3D printing is hollow turbine blade. A turbine blade is the individual components. These are used to up the turbine section of a gas turbine. The blades must designed to withstand the high pressure and high temperature comings from combustor. These 3D printed hollow compounds has same strength as solid compounds when compared. Major advantages of the Hollow shaped compounds are heat transfer, low material cost. The aim of the paper is to reduce the cost of material and easy manufacturing of hollow compounds compared to traditional process and taken hollow turbine blade as example. Keywords: hollow compounds, 3D printing, turbine blades, Additive manufacturing.
Optimization of Design Parameters for Crane Hook Using Finite Element AnalysisIJRTEMJOURNAL
The Crane hooks are very at risk segments that are regularly utilized for mechanical purposes.
In this way such segments in an industry must be produced and composed in an approach to convey most extreme
execution without failure. Failure of a crane hook essentially relies upon three central point i.e. measurement,
material, overload. The undertaking is worried towards expanding the safe load by fluctuating the cross-sectional
measurements of the four distinct segments and diverse materials. The chose areas are square, circle, and
trapezoidal. The territory stays consistent while changing the measurements of the four unique segments. The
crane hook is demonstrated utilizing catia programming. The pressure and life investigation is finished utilizing
ANSYS 18.1 workbench. The ordinary worry along add up to misshaping, stress and life’s according to the
materials considered. It is discovered that trapezoidal cross segment yields most extreme load of 4000 KG to 5000
KG for steady cross segment zone among four cross segment.
EShape Optimization Of A Suspension Bellcrank Using 3d Finite Element MethodsIJERA Editor
The paper represents an application of an optimization procedure for a mass and stress optimization of the bellcrank of a double wishbone suspension system of SRM University’s FormulaSAE vehicle. The used optimization procedure, so-called Fully Stressed Design, is based on an indirect approach utilizing optimum criteria. The aim of the optimization was to achieve the lowest possible mass of the construction taking into consideration the allowed resistance and also to investigate and analyze the structural stress distribution of bellcrank at the real time condition during damping process and the spring actuation.
Non linear analysis of Robot Gun Support Structure using Equivalent Dynamic A...IJMER
Robot guns are being increasingly employed in automotive manufacturing to replace
risky jobs and also to increase productivity. Using a single robot for a single operation proves to be
expensive. Hence for cost optimization, multiple guns are mounted on a single robot and multiple
operations are performed. Robot Gun structure is an efficient way in which multiple welds can be done
simultaneously. However mounting several weld guns on a single structure induces a variety of
dynamic loads, especially during movement of the robot arm as it maneuvers to reach the weld
locations. The primary idea employed in this paper, is to model those dynamic loads as equivalent G
force loads in FEA. This approach will be on the conservative side, and will be saving time and
subsequently cost efficient. The approach of the paper is towards creating a standard operating
procedure when it comes to analysis of such structures, with emphasis on deploying various technical
aspects of FEA such as Non Linear Geometry, Multipoint Constraint Contact Algorithm, Multizone
meshing .
ER Publication,
IJETR, IJMCTR,
Journals,
International Journals,
High Impact Journals,
Monthly Journal,
Good quality Journals,
Research,
Research Papers,
Research Article,
Free Journals, Open access Journals,
erpublication.org,
Engineering Journal,
Science Journals,
Static Analysis of Go-Kart Chassis by Analytical and Solid Works SimulationIJMER
This paper aims to do modelling, simulation and performing the static analysis of a go
kart chassis consisting of Circular beams. Modelling, simulations and analysis are performed using 3-D
modelling software i.e. Solid Works and ANSYS according to the rulebook provided by Indian Society of
New Era Engineers (ISNEE) for National Go Kart Championship (NGKC-14).The maximum deflection is
determined by performing static analysis. Computed results are then compared to analytical calculation,
where it is found that the location of maximum deflection agrees well with theoretical approximation but
varies on magnitude aspect.
Failure analysis and redesign of shaft of overhead craneLaukik Raut
This paper deals with the failure analysis and redesign of shaft of overhead crane having capacity 25 tonne.
There is problem of failure of the shaft in gear box which is mounted on the crane. The shaft breakage occurred
due to dynamic, alternating low tensile– compressive stresses and simultaneous torsional load.
An overhead crane is mechanical equipment for lifting and lowering a load and moving it horizontally, with the
hoisting mechanism which is an integral part of the machine.
To carry out the failure analysis of shaft it is necessary to model the shaft in any modelling software like PROE, CATIA etc. Then analysis of existing shaft is done analytically and with ANSYS11. The shaft is then
redesigned with suitable material available in data book of machine design and then analysis of new design of
shaft is done with the help of ANSYS-11 software.
Design and Implementation of Conveyor Belt Speed Control using PID for Indust...ijtsrd
A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Many kinds of conveying systems are available, and are used according to the various needs of different industries. The purpose of this project is to improve the existing conveyor machine that located at the methodology lab in AL FALAH UNIVERSITY. This paper gives a review of the belt conveyor technology that focuses on the types of drives and the control system or the controller of the belt conveyor using PID controller. This paper highlights the characteristics, performance measure, requirements and the operational procedure of the belt conveyor drives and control systems. Muhammad Shahid | Md Ghaysuddin "Design and Implementation of Conveyor Belt Speed Control using PID for Industrial Applications" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25294.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/25294/design-and-implementation-of-conveyor-belt-speed-control-using-pid-for-industrial-applications/muhammad-shahid
STRUCTURAL OPTIMIZATION OF A POWERED INDUSTRIAL LIFT TRUCK FRAMEIAEME Publication
The purpose of this paper is to re-design a lift truck frame (Chassis) with the optimum mass while maintaining stress constraints. The paper also demonstrate how Optimization techniques can be applied mainly when product is already launched in market and optimized design is to be implemented without altering any existing assembly fitment parameters /functional requirement.
Abstract 3D Printing is a process of manufacturing the product on the layer by layer. And it is best processes for producing a finished objects. It was started in 1980‟s with the invention of stereo lithography. It has gone through various ups and downs throughout its development and rejection of new technologies. In this paper, we h3ave summarized the printing of hollow compounds with different shapes. Applications of 3D printed hollow compounds are turbine blades, gears, disc brakes etc. One of the major application of 3D printing is hollow turbine blade. A turbine blade is the individual components. These are used to up the turbine section of a gas turbine. The blades must designed to withstand the high pressure and high temperature comings from combustor. These 3D printed hollow compounds has same strength as solid compounds when compared. Major advantages of the Hollow shaped compounds are heat transfer, low material cost. The aim of the paper is to reduce the cost of material and easy manufacturing of hollow compounds compared to traditional process and taken hollow turbine blade as example. Keywords: hollow compounds, 3D printing, turbine blades, Additive manufacturing.
Optimization of Design Parameters for Crane Hook Using Finite Element AnalysisIJRTEMJOURNAL
The Crane hooks are very at risk segments that are regularly utilized for mechanical purposes.
In this way such segments in an industry must be produced and composed in an approach to convey most extreme
execution without failure. Failure of a crane hook essentially relies upon three central point i.e. measurement,
material, overload. The undertaking is worried towards expanding the safe load by fluctuating the cross-sectional
measurements of the four distinct segments and diverse materials. The chose areas are square, circle, and
trapezoidal. The territory stays consistent while changing the measurements of the four unique segments. The
crane hook is demonstrated utilizing catia programming. The pressure and life investigation is finished utilizing
ANSYS 18.1 workbench. The ordinary worry along add up to misshaping, stress and life’s according to the
materials considered. It is discovered that trapezoidal cross segment yields most extreme load of 4000 KG to 5000
KG for steady cross segment zone among four cross segment.
Suitability of Composite Material for Flywheel Analysis IJMER
The paper deals with analysis of flywheel in which comparison of flywheel existing material
and test material are done. There must be proper design and analysis of flywheel in order to meet the
necessity to smooth out enormous oscillations in velocity that occur during a cycle of i.c.engine in a
flywheel. So here some finite element analysis tools are used for design and analysis purpose. Then results
are compared with existing material.
DESIGN AND FABRICATION OF PORTABLE DRILLING AND BORING MACHINEvivatechijri
In India, the growth of manufacturing depends largely on its productivity. Productivity depends upon
many factors, one of the major factors are the portability and compactness along with the manufacturing
efficiency with which the operations are carried out in the industry. Productivity can be improved by automation
of machines and combining the different operations in a single machine etc. Drilling and boring are the major
processes involves in manufacturing of most of the industrial as well as commercial products. In the large scale
industry for performing the drilling and boring operations special, heavy duty machines are used but the down
side of this machines are high initial as well as maintenance cost, large space, skilled workers etc. However, in
case of small scale industry the scenario is completely different, because of lack of space, low capital investment,
unskilled workers etc. they cannot afford heavy duty machines. In This paper, a system is proposed to simplify a
drilling and boring operation by using a gear system and a simple mechanism incorporate in a single machine.
The aim of this paper is to generate a new concept to combine and perform drilling and boring operation
effectively and efficiently.
Optimization of vehicle suspension system using genetic algorithmIAEME Publication
Modeling the suspension of an automobile is of interest for many automotive and vibration engineers. Of importance for these engineers is the ride quality of the vehicle traversing over broken roads and control of body motion. When traveling over rough terrain, the vehicle exhibits bounce (up and down), pitch (rotation about the center of gravity along the vehicle's length) and roll (rotation about the center of gravity along the vehicle's width) motions.
The Lean manufacturing is important for many companies which want to eliminatethe waste and improve the quality.The research paper presents analysis of the metal processing company that makes packing automatics with the spatial cams of complex geometry, which allows specifying the law of motion of the spatial cam. The MatLab software has been used for the work
The inspiration driving CNC machining undertakings is to make explicit shapes or surface
characteristics for a thing. In view of math and surface completion determinations, conditions for machining
assignments have for the most part been chosen. Assembling ventures endeavor to make high phenomenal things
at decay cost to stay serious inside the market. This exploration zeroed in on growing the advantage of benefit
on PC mathematical control (CNC) by enhancing machining boundaries by processing activities. In this
exploration, the profundity of cut, cutting velocity and feed rate on the aluminum amalgam work piece by the
utilization of carbide unit, embed shaper, HSS were utilized to enhance the advantage of CNC processing
measures by advancing machining boundaries picked to be assessed in this investigation by utilizing Taguchi's
System approach including symmetrical exhibit. The Taguchi strategy is utilized to notice the impact of cycle
boundaries and to look at a portion of the decrease speed, feed and profundity with acknowledgment of the
essential machinability part, surface end. The surface completion has been portrayed as quality attributes and is
accepted to be straightforwardly identified with efficiency.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Aerodynamic Drag Reduction for A Generic Sport Utility Vehicle Using Rear Suc...IJERA Editor
The high demand for new and improved aerodynamic drag reduction devices has led to the invention of flow control mechanisms and continuous suction is a promising strategy that does not have major impact on vehicle geometry. The implementation of this technique on sport utility vehicles (SUV) requires adequate choice of the size and location of the opening as well as the magnitude of the boundary suction velocity. In this paper we introduce a new methodology to identifying these parameters for maximum reduction in aerodynamic drag. The technique combines automatic modeling of the suction slit, computational fluid dynamics (CFD) and a global search method using orthogonal arrays. It is shown that a properly designed suction mechanism can reduce drag by up to 9%.
Balancing the line by using heuristic method based on cpm in salbp –a case studyeSAT Journals
Abstract
In mass production systems, line balancing plays a great role, but this is not easy even if it is a simple straight line. So, in order to
solve these problems Heuristic methods are very much desirable. It is also found that Heuristic methods play a great role in the
formation of metaheuristic methods.Therefore it is very much important to use more efficient heuristic methods. In this research
paper we presents a heuristic method that is based on critical path method for simple assembly line balancing. This research is
mainly concerned with objectives of minimizing the number of workstations, improvement of smoothness index, mean absolute
deviation (MAD) and increasing line efficiency.
Keywords-Heuristic methods,Assembly line balancing problem, Critical path method, Simple assembly line balancing.
Similar to A review on optimization of rotary table pallets (20)
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.