This document provides a summary of cellular networks, wireless sensor networks (WSNs), and mobile ad hoc networks (MANETs). It discusses the basic architecture and characteristics of each network type, including issues like energy efficiency in WSNs. The document also examines routing protocols and security requirements for each network, such as data confidentiality and integrity. Key differences between the networks are highlighted, with WSNs focusing on sensor communication, cellular networks using fixed base stations, and MANETs being decentralized and mobile.
A SURVEY OF ENERGY-EFFICIENT COMMUNICATION PROTOCOLS IN WSNIAEME Publication
Wireless sensor networks are harshly restricted by storage capacity, energy and computing power. Wireless Sensor Networks have acquired a lot of attention by research community, manufacturer as well as actual users for monitoring remote trades and how to gather data in different environment. The wireless sensor nodes are especially battery powered devices having life can be extended for some times while long lasting and reliable for maintaining consumption of energy and network lifetime while designs applications and protocols. So it is essential to design effective and energy efficient protocol in order to enhance the network lifetime. In this paper we present the study of different energy efficient communication protocols of Wireless Sensor Networks (WSNs).Then some of the communication protocols which are widely used in WSNs to improve network performance are also discussed advantages and disadvantages of each protocols.
Mobile Ad hoc Network is basically a crew of mobile traffic nodes, which figure an effectual dynamic topology and built a resource mannered network. Mobile Ad hoc Networks are exceptional cases of ad hoc networks that, but it is lacking infrastructure, communicating entities pass with various accelerations. For that reason, this impedes or delay lays the foundation of well built end-to-end communication paths. So Mobile Ad-hoc Network having efficient data transfer. In this manner, MANETs have out of the common network concerns and security challenges to get the advanced connectivity, immune communications, and reputation executives systems which have an impact on the trust in cooperation and settlement between mobile networking units. In this survey paper we confer about the security attributes, attacks, and challenges of MANETs.So, it is important to have a better and good formation algorithm to connect all the nodes to each other. There must be less time, low delay time, more battery life, more speeds of packets.
EVALUATING PERFORMANCE OF WIRELESS SENSOR NETWORK IN REALISTIC SMART GRID ENV...ijwmn
Wireless Sensor Networks (WSNs) is a strong candidate for smart grid applications, such as advanced metering infrastructure, demand response management, dynamic pricing, load control, electricity fraud detection, fault diagnostics, substation monitoring and control as well as automation of various elements of the power grid. The realization of these applications directly depends on efficiency of communication facilities among power grid elements. However, the harsh power grid environmental conditions with obstacles, noise,interference, and fading pose great challenges to reliability of these facilities to monitor and control the power grid. The purpose of this paper is to evaluate performance of WSNs in different power grid environments such as 500 kv substations, main power control room, and underground network transformer vaults. The power grid environments are modeled using a log-normal shadowing path loss model channel with realistic parameters. The network is simulated and performance is evaluated using packet delivery ratio, communication delay, and energy consumption. The simulation results have revealed that different environments have considerable impacts on performance of WSNs which make it suitable for most applications that need low data rate with low reliability requirements.
A SURVEY OF ENERGY-EFFICIENT COMMUNICATION PROTOCOLS IN WSNIAEME Publication
Wireless sensor networks are harshly restricted by storage capacity, energy and computing power. Wireless Sensor Networks have acquired a lot of attention by research community, manufacturer as well as actual users for monitoring remote trades and how to gather data in different environment. The wireless sensor nodes are especially battery powered devices having life can be extended for some times while long lasting and reliable for maintaining consumption of energy and network lifetime while designs applications and protocols. So it is essential to design effective and energy efficient protocol in order to enhance the network lifetime. In this paper we present the study of different energy efficient communication protocols of Wireless Sensor Networks (WSNs).Then some of the communication protocols which are widely used in WSNs to improve network performance are also discussed advantages and disadvantages of each protocols.
Mobile Ad hoc Network is basically a crew of mobile traffic nodes, which figure an effectual dynamic topology and built a resource mannered network. Mobile Ad hoc Networks are exceptional cases of ad hoc networks that, but it is lacking infrastructure, communicating entities pass with various accelerations. For that reason, this impedes or delay lays the foundation of well built end-to-end communication paths. So Mobile Ad-hoc Network having efficient data transfer. In this manner, MANETs have out of the common network concerns and security challenges to get the advanced connectivity, immune communications, and reputation executives systems which have an impact on the trust in cooperation and settlement between mobile networking units. In this survey paper we confer about the security attributes, attacks, and challenges of MANETs.So, it is important to have a better and good formation algorithm to connect all the nodes to each other. There must be less time, low delay time, more battery life, more speeds of packets.
EVALUATING PERFORMANCE OF WIRELESS SENSOR NETWORK IN REALISTIC SMART GRID ENV...ijwmn
Wireless Sensor Networks (WSNs) is a strong candidate for smart grid applications, such as advanced metering infrastructure, demand response management, dynamic pricing, load control, electricity fraud detection, fault diagnostics, substation monitoring and control as well as automation of various elements of the power grid. The realization of these applications directly depends on efficiency of communication facilities among power grid elements. However, the harsh power grid environmental conditions with obstacles, noise,interference, and fading pose great challenges to reliability of these facilities to monitor and control the power grid. The purpose of this paper is to evaluate performance of WSNs in different power grid environments such as 500 kv substations, main power control room, and underground network transformer vaults. The power grid environments are modeled using a log-normal shadowing path loss model channel with realistic parameters. The network is simulated and performance is evaluated using packet delivery ratio, communication delay, and energy consumption. The simulation results have revealed that different environments have considerable impacts on performance of WSNs which make it suitable for most applications that need low data rate with low reliability requirements.
An active technique for power saving in WSN under additive white gaussian noi...IJECEIAES
The work with feature of self-power supply by solar cell or by the battery or together at the same time. Therefore, the power dissipation is the big problem in wireless sensor network (WSN) especially when it is works for long time. The efficient method for reducing the power consumption within working is needed. The process of reducing waste power is one of the top priorities of scientists and designers of wireless sensor networks. The aim of this paper is to find the dominant method to reduce the power consumption in the wireless sensor network in order to stay works for long time and maintain the links with other nodes without loss of connection and transfer the information correctly. In this paper, a modified method was invented to minimize power utilization per data bit in a connection. This new method depends on the optimization process for reducing the power consumption as low as possible. All the tests of simulation process were done in additive white Gaussian noise (AWGN) channel. Numerical results demonstrated that the new method reduce the power when different values of noise are present with different types of modulation. Also the distance that the WSN will reach the information to it will be increase with presence of various noise amounts with different types of modulation. As a result, the power was decreased and the signal was reach more distance.
Analysis and Performance evaluation of Traditional and Hierarchal Sensor NetworkIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
Comprehensive Review on Base Energy Efficient Routing ProtocolIJRES Journal
With the faster growing in electronics industry, small inexpensive battery powered wireless sensors have made an impact on the communications with the physical world. The Wireless Sensor Networks (WSN) consists of hundreds of sensor nodes which are resource constrained. WSN nodes monitor various physical and environmental conditions very cooperatively. WSN uses various nodes for the communication. WSN has become one of the interested areas in the field of research from last few years. To enhance the lifetime of the whole networks energy reduction is the necessary consideration for design and analyse of the clustering and routing protocols. This paper describes the study of various energy efficient routing protocols in WSNs which are important for their designing purpose so as to meet the various resource constraints.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A Review of Routing Protocols for Wireless Sensor NetworkIJMER
A wireless sensor network is a collection of nodes organized into a cooperative network. Each node consists of processing capability, may contain multiple types of memory, have a RF transceiver, have a power source, and accommodate various sensors and actuators. The nodes
communicate wirelessly and often self-organize after being deployed in an ad hoc fashion. Routing protocols for wireless sensor networks are responsible for maintaining the routes in the network and have to ensure reliable multi-hop communication .The performance of the network is
greatly influenced by the routing techniques. Routing is to find out the path to route the sensed data to the base station. In this paper the features of WSNs are introduced and routing protocols are reviewed for Wireless Sensor Network
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A Review on - Comparative Study of Issues in Cellular, Sensor and Adhoc Networkscscpconf
A cellular network is an asymmetric radio network which is made up of fixed transceivers or
nodes, maintain the signal while the mobile transceiver which is using the network is in the
vicinity of the node. An ad-hoc network is a local area network (LAN) that is built
spontaneously as devices connect.
Instead of relying on a base station to coordinate the flow of messages to each node in the
network, the individual network nodes forward packets to and from each other.
This paper focuses on various issues in cellular, adhoc and sensor network. As issues proves helpful for forthcoming research, this paper work as a backbone to elaborate the various research areas.
CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...ijwmn
A wireless sensor network is composed of many sensor nodes, that have beengiven out in a
specific zoneandeach of them hadanability of collecting information from the environment and
sending collected data to the sink. The most significant issues in wireless sensor networks,
despite the recent progress is the trouble of the severe limitations of energy resources.Since that
in different applications of sensor nets, we could throw a static or mobile sink, then all aspects of
such networks should be planned with an awareness of energy.One of the most significant topics
related to these networks, is routing. One of the most widely used and efficient methods of
routing isa hierarchy (based on clustering) method.
CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...ijwmn
A wireless sensor network is composed of many sensor nodes, that have beengiven out in a
specific zoneandeach of them hadanability of collecting information from the environment and
sending collected data to the sink. The most significant issues in wireless sensor networks,
despite the recent progress is the trouble of the severe limitations of energy resources.Since that
in different applications of sensor nets, we could throw a static or mobile sink, then all aspects of
such networks should be planned with an awareness of energy.One of the most significant topics
related to these networks, is routing. One of the most widely used and efficient methods of
routing isa hierarchy (based on clustering) method.
In The present study with the objective of cutting down energy consumption and persistence of
network coverage, we have offered a novel algorithm based on clustering algorithms and multihop routing.To achieve this goal, first, we layer the network environment based on the size of the
network.We will identify the optimal number of cluster heads and every cluster head based on
the mechanism of topology control will start to accept members.Likewise, we set the first layer
as gate layer and subsequently identifying the gate’s nodes, we’d turn away half of the sensors
and then stop using energy and the remaining nodes in this layer will join the gate’s nodes
because they hold a critical part in bettering the functioning of the system. Cluster heads off
following layers send the information to cluster heads in the above layer until sent data will be
sent to gate’s nodes and finally will be sent to sink. We have tested the proposed algorithm in
two situations 1) when the sink is off and 2)when a sink is on and simulation data shows that
proposed algorithm has better performance in terms of the life span of a network than LEACH
and ELEACH protocols.
An active technique for power saving in WSN under additive white gaussian noi...IJECEIAES
The work with feature of self-power supply by solar cell or by the battery or together at the same time. Therefore, the power dissipation is the big problem in wireless sensor network (WSN) especially when it is works for long time. The efficient method for reducing the power consumption within working is needed. The process of reducing waste power is one of the top priorities of scientists and designers of wireless sensor networks. The aim of this paper is to find the dominant method to reduce the power consumption in the wireless sensor network in order to stay works for long time and maintain the links with other nodes without loss of connection and transfer the information correctly. In this paper, a modified method was invented to minimize power utilization per data bit in a connection. This new method depends on the optimization process for reducing the power consumption as low as possible. All the tests of simulation process were done in additive white Gaussian noise (AWGN) channel. Numerical results demonstrated that the new method reduce the power when different values of noise are present with different types of modulation. Also the distance that the WSN will reach the information to it will be increase with presence of various noise amounts with different types of modulation. As a result, the power was decreased and the signal was reach more distance.
Analysis and Performance evaluation of Traditional and Hierarchal Sensor NetworkIJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
Comprehensive Review on Base Energy Efficient Routing ProtocolIJRES Journal
With the faster growing in electronics industry, small inexpensive battery powered wireless sensors have made an impact on the communications with the physical world. The Wireless Sensor Networks (WSN) consists of hundreds of sensor nodes which are resource constrained. WSN nodes monitor various physical and environmental conditions very cooperatively. WSN uses various nodes for the communication. WSN has become one of the interested areas in the field of research from last few years. To enhance the lifetime of the whole networks energy reduction is the necessary consideration for design and analyse of the clustering and routing protocols. This paper describes the study of various energy efficient routing protocols in WSNs which are important for their designing purpose so as to meet the various resource constraints.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A Review of Routing Protocols for Wireless Sensor NetworkIJMER
A wireless sensor network is a collection of nodes organized into a cooperative network. Each node consists of processing capability, may contain multiple types of memory, have a RF transceiver, have a power source, and accommodate various sensors and actuators. The nodes
communicate wirelessly and often self-organize after being deployed in an ad hoc fashion. Routing protocols for wireless sensor networks are responsible for maintaining the routes in the network and have to ensure reliable multi-hop communication .The performance of the network is
greatly influenced by the routing techniques. Routing is to find out the path to route the sensed data to the base station. In this paper the features of WSNs are introduced and routing protocols are reviewed for Wireless Sensor Network
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A Review on - Comparative Study of Issues in Cellular, Sensor and Adhoc Networkscscpconf
A cellular network is an asymmetric radio network which is made up of fixed transceivers or
nodes, maintain the signal while the mobile transceiver which is using the network is in the
vicinity of the node. An ad-hoc network is a local area network (LAN) that is built
spontaneously as devices connect.
Instead of relying on a base station to coordinate the flow of messages to each node in the
network, the individual network nodes forward packets to and from each other.
This paper focuses on various issues in cellular, adhoc and sensor network. As issues proves helpful for forthcoming research, this paper work as a backbone to elaborate the various research areas.
CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...ijwmn
A wireless sensor network is composed of many sensor nodes, that have beengiven out in a
specific zoneandeach of them hadanability of collecting information from the environment and
sending collected data to the sink. The most significant issues in wireless sensor networks,
despite the recent progress is the trouble of the severe limitations of energy resources.Since that
in different applications of sensor nets, we could throw a static or mobile sink, then all aspects of
such networks should be planned with an awareness of energy.One of the most significant topics
related to these networks, is routing. One of the most widely used and efficient methods of
routing isa hierarchy (based on clustering) method.
CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...ijwmn
A wireless sensor network is composed of many sensor nodes, that have beengiven out in a
specific zoneandeach of them hadanability of collecting information from the environment and
sending collected data to the sink. The most significant issues in wireless sensor networks,
despite the recent progress is the trouble of the severe limitations of energy resources.Since that
in different applications of sensor nets, we could throw a static or mobile sink, then all aspects of
such networks should be planned with an awareness of energy.One of the most significant topics
related to these networks, is routing. One of the most widely used and efficient methods of
routing isa hierarchy (based on clustering) method.
In The present study with the objective of cutting down energy consumption and persistence of
network coverage, we have offered a novel algorithm based on clustering algorithms and multihop routing.To achieve this goal, first, we layer the network environment based on the size of the
network.We will identify the optimal number of cluster heads and every cluster head based on
the mechanism of topology control will start to accept members.Likewise, we set the first layer
as gate layer and subsequently identifying the gate’s nodes, we’d turn away half of the sensors
and then stop using energy and the remaining nodes in this layer will join the gate’s nodes
because they hold a critical part in bettering the functioning of the system. Cluster heads off
following layers send the information to cluster heads in the above layer until sent data will be
sent to gate’s nodes and finally will be sent to sink. We have tested the proposed algorithm in
two situations 1) when the sink is off and 2)when a sink is on and simulation data shows that
proposed algorithm has better performance in terms of the life span of a network than LEACH
and ELEACH protocols.
International Journal of Computational Engineering Research(IJCER) ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
The development of the wireless sensor networks (WSNs) in various applications like Defense, Health,
Environment monitoring, Industry etc. always attract many researchers in this field. WSN is the network
which consists of collection of tiny devices called sensor nodes. Sensor node typically combines wireless
radio transmitter-receiver and limited energy, restricted computational processing capacity and
communication band width. These sensor node sense some physical phenomenon using different
transduces. The current improvement in sensor technology has made possible WSNs that have wide and
varied applications. While selecting the right sensor for application a number of characteristics are
important. This paper provides the basics of WSNs including the node characteristics. It also throws light
on the different routing protocols.
Mobile Ad-Hoc Networks are most usefully in current environments. It’s required high performance, networks load and Throughput. In Mobile Ad-hoc Networks Routing is the hot topic for research. Basically two types routing protocols are work in the mobile Ad-hoc Networks: 1) Proactive and 2) Reactive. Researchers have projected different routing algorithm. Important work has been done on routing in ad hoc networks, some of the important works so far were the destination-sequence distance vector (DSDV) protocol, the temporally ordered routing protocol (TORA), dynamic source routing protocol (DSR) and ad hoc on demand routing protocol (AODV). These algorithms use Open Shortest Path First (OSPF) for find optimum route source to destination.ThesisScientist.com
A Review Paper on Energy Capable Routing in Wireless Sensor Networkijtsrd
This day’s wireless sensor networks draw the attention of researchers more due to their admired applications in environment monitoring systems, radiation uses and nuclear threat detection applications weapon sensors for ships battlefield reconnaissance and surveillance military power, control mechanism, intelligence centre, communications and targeting systems and biomedical applications. Wireless sensor network provides cheap cost solution to various world problems. Sensors are low cost devices with limited storage, computational power systems. Several security mechanisms for sensor network must be energy efficient as security is the major concerned when they will be used in large scale as sensors have limited power and computational capability and should not be computational intensive. In this review paper we study the various energy efficient secure routing methods for WSN. Prof. Pooja | Prof. Sakena Benazer. S | Prof. Ajay Kumar "A Review Paper on Energy Capable Routing in Wireless Sensor Network" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-3 , April 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49546.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/49546/a-review-paper-on-energy-capable-routing-in-wireless-sensor-network/prof-pooja
Spread Spectrum Based Energy Efficient Wireless Sensor NetworksIDES Editor
The Wireless Sensor Networks (WSN) is
considered to be one of the most promising emerging
technologies. However one of the main constraints which
is holding back its wide range of applications is the
battery life of the sensor node and thus effecting the
network life. A new approach to this problem has been
presented in this paper. The proposed method is suitable
for event driven applications where the event occurrence
is very rare. The system uses spread spectrum as a means
of communication.
EFFECTIVE AND SECURE DATA COMMUNICATION IN WSNs CONSIDERING TRANSFER MODULE O...IJEEE
A Bio-inspired clustering algorithm based on BFO has been proposed and investigation on energy efficient clustering algorithms related to WSNs has been done in this paper. The contribution of this paper related to use of Bacteria foraging algorithm firstly for WSNs for enhancing network lifetime of sensor nodes.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
EFFICIENT HIERARCHICAL ROUTING PROTOCOL IN SENSOR NETWORKSijassn
Wireless sensor network (WSN) is the network of hundreds and thousands of micro-sensor nodes,
connecting each other by a wireless medium.WSN provide reliable sensing of the environment, detecting
and reporting events to the sink. One of the most important constraints of WSN is energy consumption.
Since the micro sensors are small in dimension, batteries are necessary to produce power to the network. In
this paper, we have proposed an algorithm for hierarchy based protocols of wireless sensor networks,
which consist of two groups of sensor nodes in a single cluster node. Each cluster consists of a three cluster
head. The event driven data sensing mechanism is used in this paper and this sensed data is transmitted to
the master section head. The gathered data is transmitted to the sink via mobile agent. Hence efficient way
of data transmission is possible with larger group of nodes. In this approach of using hierarchy based
protocols; the lifetime of the sensor network is increased. This paper proposes an innovative approach of
cluster head election. The results are compared with LEACH protocol and proved to be energy efficient.
EVALUATING PERFORMANCE OF WIRELESS SENSOR NETWORK IN REALISTIC SMART GRID ENV...ijwmn
Wireless Sensor Networks (WSNs) is a strong candidate for smart grid applications, such as advanced metering infrastructure, demand response management, dynamic pricing, load control, electricity fraud detection, fault diagnostics, substation monitoring and control as well as automation of various elements of the power grid. The realization of these applications directly depends on efficiency of communication facilities among power grid elements. However, the harsh power grid environmental conditions with
obstacles, noise, interference, and fading pose great challenges to reliability of these facilities to monitor and control the power grid. The purpose of this paper is to evaluate performance of WSNs in different power grid environments such as 500 kv substations, main power control room, and underground network transformer vaults. The power grid environments are modeled using a log-normal shadowing path loss model channel with realistic parameters. The network is simulated and performance is evaluated using packet delivery ratio, communication delay, and energy consumption. The simulation results have revealed that different environments have considerable impacts on performance of WSNs which make it suitable for most applications that need low data rate with low reliability requirements.
ENERGY EFFICIENT ROUTING IN WIRELESS SENSOR NETWORKS BASED ON QOSIAEME Publication
Energy is a serious resource parameter in Wireless Sensor Networks. Utilizing energy in an effectual manner is a challenging task in Wireless Sensor Networks. This paper presents an overview on various energy efficient routing protocols which fulfills the criteria of QoS parameters. Various energy effective and QoS based routing protocols have been compared. To improve the QoS in a network, data fusion and data accumulation is considered to be one of major energy saving technique. The routing protocols based on data aggregation, reduced cost routing and secure routing are also discussed in detail. Simulation tools like NS2, NS3, OMNET etc can be used to evaluate the network performance.
ENERGY EFFICIENT ROUTING IN WIRELESS SENSOR NETWORKS BASED ON QOSIAEME Publication
Energy is a serious resource parameter in Wireless Sensor Networks. Utilizing energy in an effectual manner is a challenging task in Wireless Sensor Networks. This paper presents an overview on various energy efficient routing protocols which fulfills the criteria of QoS parameters. Various energy effective and QoS based routing protocols have been compared. To improve the QoS in a network, data fusion and data accumulation is considered to be one of major energy saving technique. The routing protocols based on data aggregation, reduced cost routing and secure routing are also discussed in detail. Simulation tools like NS2, NS3, OMNET etc can be used to evaluate the network performance.
Data Flow in Wireless Sensor Network Protocol Stack by using Bellman-Ford Rou...journalBEEI
Wireless sensor network consists various sensor nodes that are used to monitor any target area like forest fire detection by our army person and monitoring any industrial activity by industry manager. Wireless sensor networks have been deployed in several cities to monitor the concentration of dangerous gases for citizens. In wireless sensor network when sensor nodes communicate from each other then routing protocol are used for communication between protocol layers. Wireless sensor network protocol stack consist five layers such as Application layer, Transport layer, Network layer, MAC Layer, Physical layer. In this paper we study and analysis Bellman-Ford routing algorithm and check the flow of data between these protocol layers. For simulation purpose we are using Qualnet 5.0.2 simulator tool.
Similar to A RELATIVE STUDY ON CELLULAR, WSN AND MANETS (20)
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
2. A Relative Study on Cellular, WSN and Manets
http://www.iaeme.com/IJARET/index.asp 239 editor@iaeme.com
2. WIRELESS SENSOR NETWORK
A WSN is a collection of sensors that can communicate through wired or wireless medium. The
sensors are allowed to communicate within its communication range. It has received a greater
interest in various applications such as disaster management, border protection, combat field
reconnaissance, in military for security surveillance, structural health monitoring, industrial
automation, civil structure monitoring, and monitoring the biologically hazardous places and
in variety of applications.
A sensor network must be able to operate under changing environment. Specifically, our
protocols must be able to enable network operation during start-up, steady state, and failure.The
necessity of operation under these conditions is required because in most cases, the sensor
network must operate unattended. Once the nodes have booted up and a network is formed,
most of the nodes will be able to sustain a steady state of operation, i.e. their energy reservoirs
are nearly full and they can support all the sensing, signal processing and communications tasks
as required. In this mode, the group of the nodes will be formed into a multi-hop wireless
network. The node begin to establish and maintain paths by which information is passed to one
or more sink nodes.
A Sink node is act as a clusterhead which gather, control and forward data collected by
other sensor nodes. A sink node is having the large transmission range as compare to other
nodes. The sink may also be a mobile node or active node acting as information sink, or any
other entity that is extracting the information from the sensor network. Although the multi-hop
network can operate in both the sensor-to-sink or sink-to-sensor
Sensor nodes are expected to operate and adjust in changing environments and should be
applicable in large areas. Failures are susceptible in wireless sensor networks due to
inhospitable, unstable environment and unattended deployment. The data communication from
transmitter to receiver and vice versa may cause energy depletion in sensor nodes and therefore,
it is common for sensor nodes to exhaust its energy completely and stop operating and thus,
need to switch between wakeup and sleep modes. This may cause connectivity and data loss
during communication. Therefore, it is necessary that network failures are detected in advance
and appropriate measures should be taken to avoid network failures. Figure 1 gives a description
of the simple node architecture[2].
To design a system, the mobile assumes full responsibility of making and breaking
connections.
Figure 1 Node Architecture
If the invitation message, which is inherently part of the stationary MAC algorithm, is
included as a shared message. Figure 2 shows general mobile scenario[2].
3. Syeda Kausar Fatima, Dr. Syeda Gauhar Fatima, Dr. Syed Abdul Sattar, Syed Mohd Ali
http://www.iaeme.com/IJARET/index.asp 240 editor@iaeme.com
Figure 2 General Mobile Scenario
Figure 3 Architecture of sensor node
Routing protocols in WSNs are as follows:
• Flat Routing: each node performs the same role and sensor nodes work together to
perform the sensing task.
• Hierarchical (Cluster-based) Routing: higher-energy nodes are used to process and send
the
• scalability, lifetime of the network, and energy efficiency. Hierarchical routing is an
efficient way information, while low-energy nodes are used to perform the sensing in
the proximity of the target. The creation of clusters and assigning special tasks to cluster
heads leads to overall system to lower energy consumption within a cluster, performing
data aggregation and fusion in order to decrease the number of transmitted messages to
the sink node
• Location-based: sensor nodes are addressed by means of their locations. The distance
between neighboring nodes can be estimated on the basis of incoming signal strengths.
To save energy, some location-based schemes demand that nodes should go to sleep if
there is no activity. Depending on the protocol operation we can divide routing protocols
in:
• Query-based: the destination nodes propagate a query for data from a node through the
network, a node with this data sends the data that matches the query back to the node
that initiated it.
• Negotiation-based: use negotiation in order to eliminate redundant data transmissions.
Data transmission and reception decisions are also made based on the available
resources.
4. A Relative Study on Cellular, WSN and Manets
http://www.iaeme.com/IJARET/index.asp 241 editor@iaeme.com
• QoS-based: when delivering data, the network balances between energy consumption
and data quality through certain QoS metrics as delay, energy or bandwidth.
• Coherent-based: the entity of local data processing on the nodes distinguish between
coherent (minimum processing) and non-coherent (full processing) routing protocols.
2.1. Issues in WSN Security
Energy efficiency: The requirement for energy efficiency suggests that in most cases
computation is favoured over communication, as communication is three orders of magnitude
more expensive than computation
Figure 1 A Wireless Sensor Network
• Cryptography: No public key cryptography is provided in wireless sensor network.
Public-key algorithms is expensive on sensor nodes as in case of storage and energy.
• Multilayers for security: Security becomes an important factor because attacks can
occur on different layers of a networking stack as defined in the OSI model.
2.2. Security Requirements in WSN
• Data Confidentiality: Data confidentiality is one of the important issue in network
security. The security can be maintained and provided by applying strong cryptographic
algorithms. Confidentiality means that unauthorized third parties cannot read
information between two communicating parties while transmitting data from one end
to another.
• Data Integrity and authenticity: Data confidentiality only ensures that data can not be
read by the third party, but it does not guarantee that data is unaltered or unchanged in
the middle of transmission. Integrity means that the receiver should get the original data.
3. CELLULAR NETWORK
A Cellular network is one of the radio network distributed over land areas called cells, each
served by at least one fixed-location transceiver known as a cell site or base station .When these
cells joined together provide radio coverage over a wide geographic areas. Cellular networks
provides the advantages such as increased capacity, reduced power use, large coverage area,
reduced interference from other signals. Figure 4. shows the cellular network.
5. Syeda Kausar Fatima, Dr. Syeda Gauhar Fatima, Dr. Syed Abdul Sattar, Syed Mohd Ali
http://www.iaeme.com/IJARET/index.asp 242 editor@iaeme.com
Figure 4 A Cellular Network
Multihop Cellular Networks (MCN) are more demanding on MAC protocols than SCNs. In
SCNs, the BS is involved in every transmission of a frame, either as the transmitter or as the
receiver. This considerably simplifies the channel assignment, and MAC protocols as simple as
slotted ALOHA (used by GSM for access requests) prove to be adequate. The spatial fairness
that the MAC protocol provides is to be looked into too. Although it is possible to provide
connectionoriented services in MCNs by partitioning the available bandwidth into channels as
in SCNs, in this paper, we use one single channel, mpacket switched, contention based MAC
protocols. The scalability requirements for MCNs are to be met. Figure 5. Shows the
architecture of Wireless Sensor Network.
Figure 5 Architecture of Wireless Sensor Network
3.1. Security Issues in Cellular Network
• Authentication: Cellular networks have a large number of subscribers, and each has to
be authenticated to guarantee the right people are using the network.
• Integrity: With services such as Short Messaging Service, online/offline chat and file
transfer it is important that the data arrives without any modifications.
• Access Control: The Cellular device may have files that need to have restricted access
to them from users or any kind of unauthorized users.
6. A Relative Study on Cellular, WSN and Manets
http://www.iaeme.com/IJARET/index.asp 243 editor@iaeme.com
• Web Services: A Web Service is an element that provides functionality accessible
through the web using the standard HTTP Protocol. This opens the device to variety of
security issues such as viruses, buffer overflows, denial of service attacks etc.
• Downloaded Contents: Online downloads invites the spywares causing security issues.
Another problem is that of digital rights management. User might download
unauthorized copies which leads to securities deformity.
4. MOBILE ADHOC NETWORK
A wireless adhoc network is a decentralized type of wireless network. The network is adhoc
because it does not depend on a preexisting infrastructure, such as routers in wired networks or
access points in managed, infrastructure wireless networks. Instead, each node participates in
routing by forwarding data for other nodes, and so the determination of which nodes forward
data is made dynamically based on the network connectivity. A Mobile Adhoc Network
(MANET) is an autonomous collection of mobile routers and associated hosts connected by
bandwidthconstrained wireless links.
Figure 6 A Mobile Adhoc Network (MANET)
The network’s wireless topology may change rapidly and unpredictably. Such a network
may operate in a standalone fashion or may be connected to the larger Internet. Figure 3. Shows
the mobile adhoc network. Three categories that existing ad-hoc network routing protocols are
as follows:
1. Table Driven Protocols
2. On Demand Protocols
3. Hybrid Protocols
Figure 7 Adhoc routing protocols
Table Driven Routing Protocols, also known as Proactive Protocols, they are independent
of traffic demands.This type of protocol is slow to come together. Table Driven Protocols will
use limited resources such as power, bandwidth.
On Demand Routing Protocols, also known as Reactive Protocols, they establish routes
between nodes only when they are required to route data packets. On Demand protocols are
efficient when the route discovery is frequent than the data transfer. On Demand Protocols more
useful in large networks with light traffic and with low mobility.
7. Syeda Kausar Fatima, Dr. Syeda Gauhar Fatima, Dr. Syed Abdul Sattar, Syed Mohd Ali
http://www.iaeme.com/IJARET/index.asp 244 editor@iaeme.com
Hybrid Routing Protocols combine the features of Table Based Routing Protocols and On
Demand Routing Protocols.
4.1. Security Problems in Adhoc Network
• Susceptible to Channels: messages can be eavesdropped and bogus messages can be
injected into the network without the difficulty of having physical access to network
components which violent the security issue.
• Lack of Infrastructure: Ad hoc networks are considered to operate independently of any
fixed infrastructure.
4.2. Security Requirements for Adhoc Network
• Confidentiality: Ensures certain information is never disclosed to unauthorized users.
• Integrity: Message received at the receiver side must be original.
• Authentication: Only the authorized user can access the data.
• Non-impersonation: Noone can act to be another authorized member to learn any useful
information.
• Attacks using fabrication: Attackers created the false route to access the information.
This type of attacks is hard to identify.
5. CONCLUSIONS
This paper proposed the comparison between sensor network, cellular network and adhoc
network . Also this paper includes various security issues requirements of the above networks.
Also it includes the architecture and various routing protocols of these main wireless networks.
REFERENCES
[1] Zoran S. Bojkovic, Bojan M. Bakmaz, and Miodrag R. Bakmaz (2008), “Security Issues in
WSN,”International Journal Of Communications, Issue 1, Volume 2.
[2] Katayoun Sohrabi, Jay Gao, ishal Ailawadhi and Gregory J Pottie, “Protocols for Self-
Organization in Wireless Sensor Network”, IEEE Journal on Personal Communication,
2000.
[3] http://ntrg.cs.tcd.ie/undergrad/4ba2.05/group11/index.html
[4] Karan Singh, R. S. Yadav, Ranvijay (2007), “Review Paper On Ad Hoc Network Security”,
International Journal of Computer Science and Security”, Issue 1, Volume 1.
[5] Kalpana Sharma, M.K. Ghose, Deepak Kumar, Raja Peeyush Kumar Singh, Vikas Kumar
Pande (2010), “A Comparative Study of Various Security Approaches Used in Wireless
Sensor Networks”,International Journal of Advanced Science and Technology, Vol. 17.
[6] H. Yang, H. Luo, F. Ye, S. Lu, and L. Zhang (2004), “Security in mobile adhoc networks:
challenges and solutions," IEEE Wireless Communications, vol. 11, no. 1, pp. 38-47.
[7] Roberto Di Pietro, Pietro Michiardi, Refik Molva (2007), “Confidentiality and Integrity for
Data Aggregation in WSN using Peer Monitoring”.
[8] Nandini. S. Patil, Prof. P. R. Patil (2010), “Data Aggregation in Wireless Sensor
Network,”IEEE International Conference on Computational Intelligence and Computing
Research, 2010.
[9] Li, Raghu Kisore Neelisetti, Cong Liu, and Alvin Lim (2010), “Efficient Multipath Protocol
for WSN”, International Journal of Mobile and Wireless, Vol 2, No.1.
[10] Simarpreet Kaur, and Leena Mahajan (2011),“Power Saving MAC Protocols for WSNs and
Optimization of S-MAC Protocol”, International Journal of Radio Frequency Identification
and Wireless Sensor Networks.