99772229 hazard-analysis-and-control
•
4 likes•653 views
This document summarizes OSHA's guidelines on hazard analysis and control. It discusses employers' responsibility to properly train employees and conduct safety inspections. It identifies common workplace hazards such as toxic chemicals, unguarded machinery, and slippery floors. The document outlines a six-step process for hazard control that includes identifying, analyzing, and developing solutions to hazards. It discusses strategies for hazard identification, categories of hazards, and a hierarchy of controls to eliminate or reduce hazards.
Report
Share
Report
Share
Download to read offline
Recommended
Hazard analysis and control
This document discusses hazard analysis and control. It outlines basic employer and employee responsibilities regarding safety. Employers must properly instruct workers and conduct safety inspections. Employees must follow safety policies and report injuries. The document identifies various workplace hazards like toxic chemicals, poor equipment guarding, and clutter. It describes recognizing hazards through industry standards, employee observations, and common sense. An effective hazard control process involves identifying, analyzing, developing solutions, implementing recommendations, and evaluating results. Control methods include elimination, substitution, engineering controls, administrative controls, and personal protective equipment.
Accident Investigation
This document outlines the goals and procedures for conducting an accident investigation. It discusses preparing an investigation team, conducting interviews of witnesses, examining the accident location and equipment involved, determining causal factors, and recommending corrective actions. The goals are to prevent recurrences, determine the cause, document the company's version, and complete required reporting. Investigations should occur immediately after an incident to record details while memories are fresh.
Job Hazard Analysis
This document provides information on job hazard analysis (JHA) from Graves Construction. It defines JHA as a method to identify hazards by breaking down jobs into steps. Performing JHA helps identify existing and potential hazards to prioritize corrective actions that reduce and eliminate hazards. The benefits of JHA include reducing injuries and absenteeism while increasing productivity, morale and compliance. The document outlines how jobs are selected for JHA and the steps to perform one, including breaking down the job, identifying hazards, evaluating hazards, and recommending controls. It also discusses revising JHAs when accidents occur, jobs change or on a scheduled basis.
2014 Hazards - Linking task analysis with other process safety activities
IChemE Hazards conference. How to link task analysis with other process safety activities and the benefits of doing so.
99771535 conducting-a-job-hazard-analysis
This document summarizes conducting a job hazard analysis. It discusses identifying uncontrolled hazards through analyzing the relationship between workers, tasks, tools, and the work environment. It recommends involving employees to discuss potential hazards and accidents. The analysis should look at hazardous conditions, unsafe behaviors, high risk behaviors, risk level, and utilize a format that lists job steps, hazards present, and preventive measures. The goals are to identify what can go wrong, consequences, likelihood, and contributing factors to develop safe job procedures and improve the analysis process.
WORKPLACE SAFETY, ERGONOMICS & MANUAL HANDLING MODULES
Descriptions of various courses and samples modules on Occupational Safety, Health and Environment presented by me.
Fostering a safety culture
A Safety Moment is a brief (2-5 minute) safety discussion held at the beginning of meetings or shifts to remind employees about safety. Safety Moments can cover a variety of topics and emphasize that safety is important at work, home, and in all aspects of life. When addressing unsafe behaviors with coworkers, it is best to respectfully define the problem, evaluate the cause in a non-accusatory way, and offer a safer alternative procedure or policy.
HIERARCHY OF CONTROL
The hierarchy of control is an approach to minimize or eliminate hazards by:
1) Eliminating the hazard completely through removal or repair.
2) Substituting hazardous materials or processes with less hazardous ones.
3) Isolating hazards through guards, barriers or containment.
4) Using engineering controls like ventilation, insulation or machine guarding.
5) Implementing administrative controls through policies, training and supervision.
6) As a last resort, using personal protective equipment like ear plugs or gloves.
Recommended
Hazard analysis and control
This document discusses hazard analysis and control. It outlines basic employer and employee responsibilities regarding safety. Employers must properly instruct workers and conduct safety inspections. Employees must follow safety policies and report injuries. The document identifies various workplace hazards like toxic chemicals, poor equipment guarding, and clutter. It describes recognizing hazards through industry standards, employee observations, and common sense. An effective hazard control process involves identifying, analyzing, developing solutions, implementing recommendations, and evaluating results. Control methods include elimination, substitution, engineering controls, administrative controls, and personal protective equipment.
Accident Investigation
This document outlines the goals and procedures for conducting an accident investigation. It discusses preparing an investigation team, conducting interviews of witnesses, examining the accident location and equipment involved, determining causal factors, and recommending corrective actions. The goals are to prevent recurrences, determine the cause, document the company's version, and complete required reporting. Investigations should occur immediately after an incident to record details while memories are fresh.
Job Hazard Analysis
This document provides information on job hazard analysis (JHA) from Graves Construction. It defines JHA as a method to identify hazards by breaking down jobs into steps. Performing JHA helps identify existing and potential hazards to prioritize corrective actions that reduce and eliminate hazards. The benefits of JHA include reducing injuries and absenteeism while increasing productivity, morale and compliance. The document outlines how jobs are selected for JHA and the steps to perform one, including breaking down the job, identifying hazards, evaluating hazards, and recommending controls. It also discusses revising JHAs when accidents occur, jobs change or on a scheduled basis.
2014 Hazards - Linking task analysis with other process safety activities
IChemE Hazards conference. How to link task analysis with other process safety activities and the benefits of doing so.
99771535 conducting-a-job-hazard-analysis
This document summarizes conducting a job hazard analysis. It discusses identifying uncontrolled hazards through analyzing the relationship between workers, tasks, tools, and the work environment. It recommends involving employees to discuss potential hazards and accidents. The analysis should look at hazardous conditions, unsafe behaviors, high risk behaviors, risk level, and utilize a format that lists job steps, hazards present, and preventive measures. The goals are to identify what can go wrong, consequences, likelihood, and contributing factors to develop safe job procedures and improve the analysis process.
WORKPLACE SAFETY, ERGONOMICS & MANUAL HANDLING MODULES
Descriptions of various courses and samples modules on Occupational Safety, Health and Environment presented by me.
Fostering a safety culture
A Safety Moment is a brief (2-5 minute) safety discussion held at the beginning of meetings or shifts to remind employees about safety. Safety Moments can cover a variety of topics and emphasize that safety is important at work, home, and in all aspects of life. When addressing unsafe behaviors with coworkers, it is best to respectfully define the problem, evaluate the cause in a non-accusatory way, and offer a safer alternative procedure or policy.
HIERARCHY OF CONTROL
The hierarchy of control is an approach to minimize or eliminate hazards by:
1) Eliminating the hazard completely through removal or repair.
2) Substituting hazardous materials or processes with less hazardous ones.
3) Isolating hazards through guards, barriers or containment.
4) Using engineering controls like ventilation, insulation or machine guarding.
5) Implementing administrative controls through policies, training and supervision.
6) As a last resort, using personal protective equipment like ear plugs or gloves.
Job Hazard Analysis
This document provides an overview of job hazard analysis (JHA). It explains that a JHA identifies hazards associated with each step of a job in order to develop solutions to remove or control hazards. The document outlines benefits of a JHA such as improved safety, efficiency, planning and selection of qualified workers. It provides guidance on performing a JHA, including questions to consider for each job step and recommended procedures after completing a JHA.
4 courseslides
This document discusses techniques for identifying workplace hazards, including job hazard analysis (JHA). It provides an example JHA for exotic plant removal. The JHA identifies hazards at each step, like environmental exposure and ergonomic strains, and recommends controls like proper personal protective equipment and lifting techniques. The document emphasizes involving employees and using a team approach to thoroughly identify hazards and appropriate controls.
Job Safety Analysis Training
This document outlines the job safety analysis (JSA) process for Pakarab Fertilizers Ltd. The JSA focuses on identifying hazards in job tasks before accidents occur. It considers the relationship between the worker, task, tools, and work environment. Jobs are selected for analysis based on injury rates, potential for severe injury, and complexity. A JSA team breaks jobs into steps, identifies hazards, and develops controls through engineering, administrative, work practice, and personal protective equipment methods. The process aims to eliminate hazards from jobs through isolation, redesign, substitution, and modification before relying on personal protective equipment and administrative controls.
Occupational Safety And Health
This document discusses occupational safety and health (OSH) and various workplace hazards. It aims to protect worker safety, health, and well-being. Various hazards are outlined, including physical, biological, chemical, psychological, and other risks like substance abuse, stress, violence and accidents. Guidelines are provided for dealing with issues like substance abuse, stress, burnout, angry employees, and workers' compensation costs to promote a safe work environment. Both employers and employees have responsibilities to identify and address hazards to comply with OSH standards.
saftey and health
This document outlines the topics and agenda for a Prime Marketing Inc. safety and health workshop presented by Chris Shriver and Storm Darrow. The workshop will cover safety training, incident reporting, bloodborne pathogens, chemical hazards, ergonomics, workplace violence, emergency preparedness, health and fitness, alcoholism, drug abuse, and stress management. Presenters will discuss OSHA regulations, personal protective equipment, response teams, and resources for further information on each topic.
New Employee Safety Orientation by Oregon State University
Oregon State University provides a safety orientation for new employees that covers the following key points:
1) OSU is committed to ensuring a safe work environment and holds supervisors accountable for safety responsibilities. Disregard of safety policies may result in discipline.
2) The Office of Environmental Health and Safety (EH&S) oversees compliance with regulations from agencies like OSHA and ensures expertise in areas such as radiation, biological, and chemical safety.
3) New employees must review materials on hazard communication and complete any required job-specific safety training with their supervisors. Documentation of all training is mandatory.
Effective Workplace Safety Inspections
This document provides guidance on conducting effective workplace safety inspections. It discusses that inspections help maintain a safe work environment by identifying and controlling unsafe conditions and acts. The inspection process involves identifying hazards through inspection of the entire indoor and outdoor work areas, implementing controls, and documenting findings and corrective actions. All agencies are required to conduct inspections using checklists, and hazards found should be corrected as soon as possible. Effective inspections reinforce safety and encourage a safe workplace.
2015 Trinity Dublin - Task risk management - hf in process safety
1. Andy Brazier is a chemical engineer and human factors consultant with 19 years of experience, specializing in human factors in major accident safety for industries including oil, gas, chemicals, power, and steel.
2. Task risk management involves a 5-stage process to systematically analyze safety critical tasks: screening processes, identifying tasks, prioritizing tasks, analyzing top tasks, and applying findings.
3. Differentiating between safety critical tasks (SCT), which have clear start/finish steps, and safety critical activities (SCA), which involve timing, tools, information, and decision making, helps clarify how to address human factors risks.
2012 IEHF - Task risk management
Institute of Ergonomics and Human Factors annual conference. Task risk management - a process for managing risks with task analysis at is heart.
7 job safety analysis - jsa
The document discusses Job Safety Analysis (JSA), which is a process to identify hazards and implement controls for each job step. It involves identifying hazards for each step, then developing safe work practices to eliminate or reduce potential incidents. JSAs should be done for high-risk tasks and whenever existing controls won't sufficiently manage risks. The key elements are separating the job into steps, identifying hazards for each step, then establishing controls. JSAs help ensure safety, gain commitment to safe practices, and identify more efficient work methods.
Health & safety
Occupational safety and health (OSH) also commonly referred to as occupational health and safety (OHS) or workplace health and safety (WHS) is an area concerned with the safety, health and welfare of people engaged in work or employment. The goals of occupational safety and health programs include to foster a safe and healthy work environment
Employee safety and health
This document discusses the importance of workplace safety and health for organizations. It outlines the benefits of a safe workplace such as higher productivity and efficiency as well as lower costs. It also describes some of the consequences of an unsafe workplace like injuries, diseases, and economic costs. Additionally, it provides an overview of common workplace hazards, accident and disease prevention strategies, and regulations like OSHA that aim to create safe and healthy work environments.
New Employee Safety Training by CAL STATE LA
This document provides an overview of new employee safety training at California State University, Los Angeles. It discusses the RM/EHS office personnel and their roles in ensuring campus health and safety. General safety resources for employees are outlined, including the injury and illness prevention program, fire life safety, emergency preparedness, and hazardous materials management. The training also covers the globally harmonized system for classifying and communicating chemical hazards, as well as heat illness prevention. Employees are instructed on identifying and reporting hazards, attending required safety trainings, and understanding their role in maintaining a safe workplace.
Hazard Manv1
This document discusses identifying workplace hazards. It defines a hazard as something with potential to cause harm and provides examples such as manual handling, slippery floors, repetitive tasks, poorly designed workspaces, chemicals, stress, and radiation. There are six main types of hazards: biological, psychological, radiation, ergonomic, physical, and chemical. The key steps to hazard management are to identify hazards, assess risks, control risks, and regularly review the process. Hazards should be identified through consultation, injury statistics, incident reports, inspections, and job safety analyses.
2006 Hazards - Managing change presentation
This document discusses managing risks associated with change. It identifies different types of changes that can occur, such as changes to equipment, technology, staffing, and procedures. It also discusses potential positive and negative consequences of these changes. The document emphasizes that change should be treated as a hazard and provides guidance on properly managing change through recognizing when change will occur, assessing risks and benefits, implementing the change, confirming completion, reviewing, and approving plans. It stresses the importance of involving all stakeholders and having competent reviewers to ensure risks are adequately addressed.
Respiratory Protection for Health Care Workers by UNC
This document summarizes a study evaluating respiratory protection programs and usage among healthcare workers in North Carolina hospitals. Key findings include:
- Healthcare workers reported difficulties wearing respirators, including problems breathing, discomfort, and communication barriers.
- Most hospitals had written respiratory protection programs, provided training, and required fit testing, but some healthcare workers reported gaps in these areas.
- When treating patients with suspected airborne infections like influenza or measles, the majority of hospitals required N95 respirators, though some still allowed surgical masks.
- Proper maintenance of respirators and supervision of correct usage varied between hospitals.
O H& S Presentation
The document discusses occupational health and safety (OHS) legislation in Victoria, including the Occupational Health and Safety Act of 2004 and regulations. It outlines shared responsibilities for OHS in learning environments and defines key terms like hazards, risks, and duty of care. Control measures for risks include eliminating hazards, substituting less hazardous materials, and using personal protective equipment if other options are not practicable.
Oh&S
The document outlines key legislation and common law related to occupational health and safety (OHS) in Australia, including the Occupational Health & Safety Act of 2004. It defines hazards as anything with the potential to cause harm in the workplace and lists several physical, chemical, biological, ergonomic, and psychological hazards. The document also discusses key responsibilities for OHS, including assessing risks, reducing risks, and being prepared for emergencies. Finally, it provides examples of safety guidelines and procedures that may be included in a hair salon's OHS program.
2012 IEHF North West branch - Task risk management
Presentation to the North West branch of IEHF. Includes slides presented at the Institutes's annual conference, with additional information about use of a flow loop simulator to test the principles with students.
Introduction To Occupational Safety
Occupational safety aims to prevent workplace accidents and injuries. It is part of the larger field of occupational safety and health, which falls under public health. An occupational safety team typically includes a safety specialist, industrial hygienist, occupational health nurse, and occupational health physician who work together to anticipate, recognize, evaluate and control hazards in the workplace in order to protect workers. Accidents can occur when there is an imbalance between the worker, equipment, and environment or a failure in one of these components of the job performance system. While conditions have improved in developed nations, many parts of the world still have dangerous working conditions.
Hazard analysis and control
This document discusses hazard analysis and control. It outlines basic employer and employee responsibilities regarding safety. Employers must properly instruct workers and conduct safety inspections. Employees must follow safety policies and report injuries. The document identifies many potential workplace hazards including equipment, chemicals, noise, and improper guard rails. It describes recognizing hazards through industry standards, employee reports, and common sense. An effective hazard control process involves identifying, analyzing, developing solutions, implementing recommendations, and evaluating results. Control methods include elimination, substitution, engineering controls, administrative controls, and personal protective equipment.
BCGT - HSSE INDUCTION.pptx
This document provides an overview and agenda for a general health, safety, security, and environmental induction training at Batangas Ventures & Properties Management Corp. The training covers in-house rules, topics including introduction to HSSE, accident reporting, safety, hazards, workers' rights and responsibilities, PPE, and emergency response. It outlines BCGT's HSSE policy to prioritize worker health and safety above all else. Key topics include accident classification, causes of accidents, hazard identification techniques, and the hierarchy of hazard controls. The objectives are to make HSSE a top priority and protect people, environment, assets, reputation and liability.
More Related Content
What's hot
Job Hazard Analysis
This document provides an overview of job hazard analysis (JHA). It explains that a JHA identifies hazards associated with each step of a job in order to develop solutions to remove or control hazards. The document outlines benefits of a JHA such as improved safety, efficiency, planning and selection of qualified workers. It provides guidance on performing a JHA, including questions to consider for each job step and recommended procedures after completing a JHA.
4 courseslides
This document discusses techniques for identifying workplace hazards, including job hazard analysis (JHA). It provides an example JHA for exotic plant removal. The JHA identifies hazards at each step, like environmental exposure and ergonomic strains, and recommends controls like proper personal protective equipment and lifting techniques. The document emphasizes involving employees and using a team approach to thoroughly identify hazards and appropriate controls.
Job Safety Analysis Training
This document outlines the job safety analysis (JSA) process for Pakarab Fertilizers Ltd. The JSA focuses on identifying hazards in job tasks before accidents occur. It considers the relationship between the worker, task, tools, and work environment. Jobs are selected for analysis based on injury rates, potential for severe injury, and complexity. A JSA team breaks jobs into steps, identifies hazards, and develops controls through engineering, administrative, work practice, and personal protective equipment methods. The process aims to eliminate hazards from jobs through isolation, redesign, substitution, and modification before relying on personal protective equipment and administrative controls.
Occupational Safety And Health
This document discusses occupational safety and health (OSH) and various workplace hazards. It aims to protect worker safety, health, and well-being. Various hazards are outlined, including physical, biological, chemical, psychological, and other risks like substance abuse, stress, violence and accidents. Guidelines are provided for dealing with issues like substance abuse, stress, burnout, angry employees, and workers' compensation costs to promote a safe work environment. Both employers and employees have responsibilities to identify and address hazards to comply with OSH standards.
saftey and health
This document outlines the topics and agenda for a Prime Marketing Inc. safety and health workshop presented by Chris Shriver and Storm Darrow. The workshop will cover safety training, incident reporting, bloodborne pathogens, chemical hazards, ergonomics, workplace violence, emergency preparedness, health and fitness, alcoholism, drug abuse, and stress management. Presenters will discuss OSHA regulations, personal protective equipment, response teams, and resources for further information on each topic.
New Employee Safety Orientation by Oregon State University
Oregon State University provides a safety orientation for new employees that covers the following key points:
1) OSU is committed to ensuring a safe work environment and holds supervisors accountable for safety responsibilities. Disregard of safety policies may result in discipline.
2) The Office of Environmental Health and Safety (EH&S) oversees compliance with regulations from agencies like OSHA and ensures expertise in areas such as radiation, biological, and chemical safety.
3) New employees must review materials on hazard communication and complete any required job-specific safety training with their supervisors. Documentation of all training is mandatory.
Effective Workplace Safety Inspections
This document provides guidance on conducting effective workplace safety inspections. It discusses that inspections help maintain a safe work environment by identifying and controlling unsafe conditions and acts. The inspection process involves identifying hazards through inspection of the entire indoor and outdoor work areas, implementing controls, and documenting findings and corrective actions. All agencies are required to conduct inspections using checklists, and hazards found should be corrected as soon as possible. Effective inspections reinforce safety and encourage a safe workplace.
2015 Trinity Dublin - Task risk management - hf in process safety
1. Andy Brazier is a chemical engineer and human factors consultant with 19 years of experience, specializing in human factors in major accident safety for industries including oil, gas, chemicals, power, and steel.
2. Task risk management involves a 5-stage process to systematically analyze safety critical tasks: screening processes, identifying tasks, prioritizing tasks, analyzing top tasks, and applying findings.
3. Differentiating between safety critical tasks (SCT), which have clear start/finish steps, and safety critical activities (SCA), which involve timing, tools, information, and decision making, helps clarify how to address human factors risks.
2012 IEHF - Task risk management
Institute of Ergonomics and Human Factors annual conference. Task risk management - a process for managing risks with task analysis at is heart.
7 job safety analysis - jsa
The document discusses Job Safety Analysis (JSA), which is a process to identify hazards and implement controls for each job step. It involves identifying hazards for each step, then developing safe work practices to eliminate or reduce potential incidents. JSAs should be done for high-risk tasks and whenever existing controls won't sufficiently manage risks. The key elements are separating the job into steps, identifying hazards for each step, then establishing controls. JSAs help ensure safety, gain commitment to safe practices, and identify more efficient work methods.
Health & safety
Occupational safety and health (OSH) also commonly referred to as occupational health and safety (OHS) or workplace health and safety (WHS) is an area concerned with the safety, health and welfare of people engaged in work or employment. The goals of occupational safety and health programs include to foster a safe and healthy work environment
Employee safety and health
This document discusses the importance of workplace safety and health for organizations. It outlines the benefits of a safe workplace such as higher productivity and efficiency as well as lower costs. It also describes some of the consequences of an unsafe workplace like injuries, diseases, and economic costs. Additionally, it provides an overview of common workplace hazards, accident and disease prevention strategies, and regulations like OSHA that aim to create safe and healthy work environments.
New Employee Safety Training by CAL STATE LA
This document provides an overview of new employee safety training at California State University, Los Angeles. It discusses the RM/EHS office personnel and their roles in ensuring campus health and safety. General safety resources for employees are outlined, including the injury and illness prevention program, fire life safety, emergency preparedness, and hazardous materials management. The training also covers the globally harmonized system for classifying and communicating chemical hazards, as well as heat illness prevention. Employees are instructed on identifying and reporting hazards, attending required safety trainings, and understanding their role in maintaining a safe workplace.
Hazard Manv1
This document discusses identifying workplace hazards. It defines a hazard as something with potential to cause harm and provides examples such as manual handling, slippery floors, repetitive tasks, poorly designed workspaces, chemicals, stress, and radiation. There are six main types of hazards: biological, psychological, radiation, ergonomic, physical, and chemical. The key steps to hazard management are to identify hazards, assess risks, control risks, and regularly review the process. Hazards should be identified through consultation, injury statistics, incident reports, inspections, and job safety analyses.
2006 Hazards - Managing change presentation
This document discusses managing risks associated with change. It identifies different types of changes that can occur, such as changes to equipment, technology, staffing, and procedures. It also discusses potential positive and negative consequences of these changes. The document emphasizes that change should be treated as a hazard and provides guidance on properly managing change through recognizing when change will occur, assessing risks and benefits, implementing the change, confirming completion, reviewing, and approving plans. It stresses the importance of involving all stakeholders and having competent reviewers to ensure risks are adequately addressed.
Respiratory Protection for Health Care Workers by UNC
This document summarizes a study evaluating respiratory protection programs and usage among healthcare workers in North Carolina hospitals. Key findings include:
- Healthcare workers reported difficulties wearing respirators, including problems breathing, discomfort, and communication barriers.
- Most hospitals had written respiratory protection programs, provided training, and required fit testing, but some healthcare workers reported gaps in these areas.
- When treating patients with suspected airborne infections like influenza or measles, the majority of hospitals required N95 respirators, though some still allowed surgical masks.
- Proper maintenance of respirators and supervision of correct usage varied between hospitals.
O H& S Presentation
The document discusses occupational health and safety (OHS) legislation in Victoria, including the Occupational Health and Safety Act of 2004 and regulations. It outlines shared responsibilities for OHS in learning environments and defines key terms like hazards, risks, and duty of care. Control measures for risks include eliminating hazards, substituting less hazardous materials, and using personal protective equipment if other options are not practicable.
Oh&S
The document outlines key legislation and common law related to occupational health and safety (OHS) in Australia, including the Occupational Health & Safety Act of 2004. It defines hazards as anything with the potential to cause harm in the workplace and lists several physical, chemical, biological, ergonomic, and psychological hazards. The document also discusses key responsibilities for OHS, including assessing risks, reducing risks, and being prepared for emergencies. Finally, it provides examples of safety guidelines and procedures that may be included in a hair salon's OHS program.
2012 IEHF North West branch - Task risk management
Presentation to the North West branch of IEHF. Includes slides presented at the Institutes's annual conference, with additional information about use of a flow loop simulator to test the principles with students.
Introduction To Occupational Safety
Occupational safety aims to prevent workplace accidents and injuries. It is part of the larger field of occupational safety and health, which falls under public health. An occupational safety team typically includes a safety specialist, industrial hygienist, occupational health nurse, and occupational health physician who work together to anticipate, recognize, evaluate and control hazards in the workplace in order to protect workers. Accidents can occur when there is an imbalance between the worker, equipment, and environment or a failure in one of these components of the job performance system. While conditions have improved in developed nations, many parts of the world still have dangerous working conditions.
What's hot (20)
New Employee Safety Orientation by Oregon State University
New Employee Safety Orientation by Oregon State University
2015 Trinity Dublin - Task risk management - hf in process safety
2015 Trinity Dublin - Task risk management - hf in process safety
Respiratory Protection for Health Care Workers by UNC
Respiratory Protection for Health Care Workers by UNC
2012 IEHF North West branch - Task risk management
2012 IEHF North West branch - Task risk management
Similar to 99772229 hazard-analysis-and-control
Hazard analysis and control
This document discusses hazard analysis and control. It outlines basic employer and employee responsibilities regarding safety. Employers must properly instruct workers and conduct safety inspections. Employees must follow safety policies and report injuries. The document identifies many potential workplace hazards including equipment, chemicals, noise, and improper guard rails. It describes recognizing hazards through industry standards, employee reports, and common sense. An effective hazard control process involves identifying, analyzing, developing solutions, implementing recommendations, and evaluating results. Control methods include elimination, substitution, engineering controls, administrative controls, and personal protective equipment.
BCGT - HSSE INDUCTION.pptx
This document provides an overview and agenda for a general health, safety, security, and environmental induction training at Batangas Ventures & Properties Management Corp. The training covers in-house rules, topics including introduction to HSSE, accident reporting, safety, hazards, workers' rights and responsibilities, PPE, and emergency response. It outlines BCGT's HSSE policy to prioritize worker health and safety above all else. Key topics include accident classification, causes of accidents, hazard identification techniques, and the hierarchy of hazard controls. The objectives are to make HSSE a top priority and protect people, environment, assets, reputation and liability.
New hire orientation rn
Purnell Energy Services (PES) is a construction company that provides services to the oil and gas industry. They have expanded their services beyond welding to include all construction services. PES has a health and safety program approved by Alberta Construction Safety Association that complies with occupational health and safety legislation. The document outlines PES's emergency response plan, 12 components of their health and safety program, regulations they must follow, responsibilities of employers, supervisors, and workers, and their company rules regarding safety. It also provides information on hazards like H2S gas and safe work practices.
JOB HAZARD ANALYSIS
Discuss the sub elements of worksite hazard analysis
Identify typical hazards in the workplace
Review various techniques that can be used to identify hazards in the workplace
New Hire Orientation
Purnell Energy Services (PES) is a construction company that provides services to the oil and gas industry. It was formerly known as Purnell Welding but expanded its services in 2013. PES specializes in facility construction, pipeline construction, maintenance, turnarounds, and shutdowns. It has a health and safety program approved by Alberta regulations that includes policies on hazard assessment and control, safe work practices, emergency preparedness, and substance abuse. PES is committed to complying with occupational health and safety legislation and providing a safe work environment for employees.
Supervisor Training Self
VIEW & RE-VIEW;
TRIAL & ERROR;
THE WAY OF LEARNING-BUT NOT FOR MANAGERS...muhammadakhlaqkhan@yahoo.com
Occupational Health & Safety (OHS )
The document discusses various topics related to workplace health and safety. It covers the importance of occupational health and safety (OHS), OHS management programs, sample company OHS policies, responsibilities of supervisors and workers, safety signs and symbols, identifying hazards, personal protective equipment (PPE), types of workplace hazards, hazard prevention and control, risk management processes, mental health awareness, first aid procedures, employers' and employees' rights and duties regarding OHS, and improving OHS in Bangladeshi workplaces. The goal is to promote a safe and healthy working environment for all.
Identification of hazard industry and risk assessment
The document discusses hazards identification and risk assessment. It defines a hazard as any source of potential harm and provides examples of common hazards like tools, equipment, and the environment. Exposure occurs when one is at risk from a hazard. Various sources of hazards are described like gravity, motion, electrical, chemical, and temperature extremes. The steps of a hazard identification process include hazard identification, risk assessment, analyzing risk controls, implementing controls, and review. Engineering controls aim to eliminate exposure by modifying the hazard source, while personal protective equipment protects employees when exposure cannot be eliminated.
Worksitehazanalysis2
Here are the steps to use the WISHA checklist:
1. Review the entire body checklist section and mark any items that apply to the overall job.
2. Review the lifting hazard section separately and mark any heavy, frequent or awkward lifts.
3. Total the number of checks in each section. Jobs with more than two checks in either section should undergo further evaluation.
4. The checklist is best used as a screening tool to identify jobs for more in-depth analysis rather than diagnosing specific problems.
February Safety Training
This document summarizes a February 2022 safety presentation on job safety/hazard analysis (JSA). It defines a JSA as a method to identify hazards by breaking down work processes. Conducting a JSA has benefits like reducing injuries and increasing productivity. The presentation outlines the four basic stages to conducting a JSA: selecting a job, breaking it into steps, identifying hazards per step, and determining corrective actions. It also discusses factors to consider when selecting jobs for analysis and questions to ask when evaluating hazards. Finally, it introduces the hierarchy of controls for mitigating identified hazards from elimination to personal protective equipment.
WORPLACE HAZARDS & PRECAUTIONS.pptx
See the attached PowerPoint Training Slide.
Conducted on 15/12/2022 at 07.20 am
With the Site Working Team at Fujairah U.A.E.
JHA-training-2011-Web-Version.ppt
This document provides an overview of a training course on Job Hazard Analysis (JHA). The course aims to teach supervisors how to perform JHAs to improve workplace safety and compliance. It covers defining a JHA, identifying which jobs require analysis, and the four-step process of completing a JHA. This includes observing jobs, breaking them into steps, identifying hazards in each step, and recommending controls. Performing JHAs helps reduce injuries and costs from accidents by recognizing risks before they cause harm. The document outlines the JHA process and key terms to help trainees understand how to prioritize, assess, and document job hazards.
Process safety managment
Process safety aims to prevent incidents involving hazardous materials that could endanger workers, property, and the environment. It involves applying engineering and operating practices to control hazards. Key elements of process safety management include process hazard analysis, operating procedures, employee participation, training, contractor management, pre-startup safety reviews, mechanical integrity programs, emergency response planning, compliance audits, and incident investigation. The goal is to anticipate, identify, evaluate, and control hazards to protect people and prevent accidents.
Ind hygiene № 27
Industrial hygiene involves anticipating, recognizing, evaluating and controlling workplace hazards through various methods including engineering controls, administrative controls and personal protective equipment to promote worker health and safety. The document outlines the principles of industrial hygiene including evaluating worker exposures, identifying hazards, assessing exposures, interpreting sampling results, and developing control strategies. The goal of industrial hygiene is to apply scientific knowledge and principles to anticipate, recognize, evaluate and control workplace hazards and stresses.
ohs-presentation-151015113844-lva1-app6891.pdf
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
RedPixel OHS Presentation
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
Lec 12 maintenence engineering
The document discusses safety procedures and regulations for chemical plants. It outlines hazards like inhalation of contaminants and leaks of flammable materials. It recommends protective equipment like hard hats, goggles, and gloves. The document also discusses safety systems like alarms, extinguishers, relief valves, and interlocks. It emphasizes training workers on operating procedures, emergency response, management of change, and incident investigation to prevent accidents at chemical plants.
Dessler 16
The document discusses guidelines for workplace safety inspections by the Occupational Safety and Health Administration (OSHA). It explains employers' responsibilities to comply with OSHA standards, cooperate with inspectors, correct any identified violations, and minimize unsafe acts by employees. The document also outlines common causes of workplace accidents and strategies for controlling workers' compensation costs, dealing with substance abuse and violence issues, and developing evacuation plans.
Similar to 99772229 hazard-analysis-and-control (20)
Identification of hazard industry and risk assessment
Identification of hazard industry and risk assessment
More from YAWAR HASSAN KHAN
Zulfikar ali bhutto memoir chakir_junejo
This document provides background on the author Chakar Ali Junejo's family and their roots in Sindh, Pakistan. It discusses how his ancestors originally migrated from Rajputana (modern Rajasthan in India) and settled in Sindh, developing agricultural land. It focuses particularly on the author's uncle, Jan Muhammad Junejo, who was educated in England and became one of the first Sindhi Muslims to become a barrister-at-law. Jan Muhammad played an active role in the Khilafat Movement and Hijrat Campaign in the early 20th century, leading hundreds of migrants to Kabul, Afghanistan in protest against British rule in India. The author's involvement in politics can be traced back to
Zulfikar ali bhutto recollections and remembrances
This document is the foreword and acknowledgements section of a book titled "Zulfikar Ali Bhutto: Recollections and Remembrances". The foreword provides background on the book, which contains recollections and memories from people who knew Zulfikar Ali Bhutto in various capacities. It discusses how Bhutto left an indelible mark on history and different people saw him in different lights. The acknowledgements section thanks those who helped compile the book by collecting material, editing contributions and preparing the manuscript for printing.
Zulfikar ali bhutto politics of charisma
This document is an introduction to a book titled "Zulfikar Ali Bhutto - Politics of Charisma" which contains messages, articles, and writings about former Pakistani Prime Minister Zulfikar Ali Bhutto. The introduction provides an overview of the book's three parts: 1) Messages from Benazir Bhutto and others on Bhutto's death anniversaries, 2) Articles from scholars and intellectuals about Bhutto's life and legacy, 3) Bhutto's own writing titled "If I am assassinated." The introduction frames Bhutto as a charismatic leader who transcended death and grew in stature, with his politics of charisma shaping how he is remembered over time.
Za bhutto architectofnewpakistan
This document provides a summary of Zulfikar Ali Bhutto's accomplishments as the leader of Pakistan in the aftermath of its defeat in the 1971 war and the loss of East Pakistan. It describes how Bhutto took charge of a demoralized and unstable nation in crisis and worked to restore stability and self-confidence. Through ambitious political, economic, and social reforms, he established the foundations for the new state of Pakistan and saved it from total ruin. However, he faced significant opposition from entrenched feudal interests and reactionary forces attempting to undermine his progressive agenda. Despite immense challenges, the document credits Bhutto with successfully guiding Pakistan towards democracy, social justice, and economic prosperity through his leadership and vision.
Zab jan mar1073
Zulfikar Ali Bhutto, the President of Pakistan, addressed a large public meeting in Karachi to discuss whether Pakistan should recognize Bangladesh. While some in the crowd reacted negatively to the idea, Bhutto said he would not recognize Bangladesh without the consent of the Pakistani people. He warned that not recognizing Bangladesh could increase costs and hurt the economy due to debt payments, but ultimately left the decision up to the people and their elected representatives. Bhutto also noted that other countries were pressuring Pakistan to recognize Bangladesh in order to facilitate the return of prisoners of war.
Z a bhutto notes from death cell
This document is a table of contents for speeches and statements made by Zulfikar Ali Bhutto, the President of Pakistan, between October 1, 1972 and December 31, 1972. It lists 105 individual speeches, statements, messages, addresses and interviews given by Bhutto during that time period covering various occasions and addressing different audiences and leaders. The topics ranged from congratulatory and condolence messages to other heads of state, to addresses given to students, workers, military personnel and citizens in different parts of Pakistan.
Was bhutto killed_before_hanging
This document discusses the controversy surrounding the death of former Pakistani Prime Minister Zulfikar Ali Bhutto. There is debate around whether Bhutto was tortured and killed before his official hanging on April 4, 1979, as ordered by then military ruler General Zia-ul-Haq. Reports from journalists and eyewitnesses at the time stated that Bhutto showed no signs of hanging and may have been beaten to death in his cell. Bhutto's daughter Benazir also believed he did not die from judicial hanging. However, Zia's regime claimed he was hanged as ordered. The circumstances and cause of Bhutto's death have remained controversial and debated in Pakistan.
Third world-new-directions-bhutto
This document provides a foreword and introduction to a collection of articles by Zulfikar Ali Bhutto. In 3 sentences:
The foreword discusses Bhutto's experience as President and Prime Minister of Pakistan, facing myriad problems from a broken country and economic upheaval, which occupied countless hours of discussion. Bhutto wrote the collected articles to formulate principles and an ethic to govern Pakistan's responses to external challenges, to avoid being misunderstood by others and ensure policymakers have a sense of direction. The introduction argues that the developing world needs a conference to reach consensus on rectifying imbalances in the global economic order, as declarations by the UN and Group of 77 have failed to bridge the gulf between rich
The pakistan papers
The document summarizes the context surrounding former Pakistani Prime Minister Zulfikar Ali Bhutto's imprisonment by the military junta led by General Mohammad Zia-ul Haq. Bhutto has been sentenced to death for conspiring to murder a political opponent, though the introduction asserts this is pretextual and that the true reason is to eliminate Bhutto for empowering workers and challenging entrenched interests. The introduction outlines Bhutto's reforms that threatened Pakistan's traditional power structures and his commitment to developing Pakistan's economy and nuclear power. It claims a vast international conspiracy involving Kissinger aims to destabilize the region by removing leaders like Bhutto promoting independence and modernization.
Speeches1957 65
This document contains the full text of a speech delivered by Zulfiqar Ali Bhutto before the United Nations General Assembly Sixth Committee on October 25, 1957 regarding defining the concept of aggression. In the speech, Bhutto argues that:
1) Defining aggression is an immensely complex task that requires caution given the delicate nature of the issue.
2) While early UN resolutions assumed defining aggression would ensure peace, further study revealed the definition's connection to peace is complicated and more analysis is needed.
3) Given the current state of international law and lack of centralized enforcement, precisely defining aggression in a way that could not be abused or distorted may not be possible.
Speeches before the security council
This document is a letter from the Government of Pakistan to the President of the UN Security Council requesting an immediate meeting to discuss the situation in Jammu and Kashmir. It summarizes recent actions by the Government of India that violate UN resolutions protecting the special autonomous status of Jammu and Kashmir, including changing titles of government positions, appointing more Hindu ministers, and purging Muslim officers. The letter argues these actions are part of India's plan to annex Jammu and Kashmir against the will of the people and in violation of their right to self-determination as affirmed in UN resolutions.
Reshaping foreign policy
This document provides biographical information about Zulfikar Ali Bhutto and an overview of the contents of a three-volume collection of his writings titled "Politics of the People". It describes Bhutto's early involvement in Pakistan's independence movement and his education in law and political science. It then outlines his career in Pakistan's government, including roles as Commerce Minister and Foreign Minister. The document notes the formation of Bhutto's new political party after leaving government in 1966 and his party's victory in 1970 elections. It concludes by listing the contents of the first volume in the collection, titled "Reshaping Foreign Policy", which contains 27 of Bhutto's speeches, articles and statements from 1948 to 1962 related to Pakistan's foreign policy
Pakistan andalliances
1. The document discusses Pakistan's foreign policy and alliances from the 1960s. It analyzes Pakistan's shifting relations with major world powers like the US, China, and India under President Ayub Khan.
2. Ayub Khan initially aligned Pakistan closely with the US, but later sought to develop relations with China and others, angering the US. The US then pressured Pakistan to improve ties with India instead in order to undermine Pakistan's relations with China.
3. At Tashkent in 1966, Pakistan agreed to a ceasefire with India despite being in a stronger position, losing strategic gains. This was seen as making unnecessary sacrifices to restore relations with the US, which did not improve as hoped
Pakistan and bhutto
The document discusses the political situation in Pakistan in 1977, focusing on the relationship between Prime Minister Zulfikar Ali Bhutto and the military under General Zia-ul-Haq. It describes how Bhutto used the military to quell post-election violence between his PPP party and the opposition PNA alliance. Talks between the two sides broke down, leading the military to take Bhutto into protective custody and impose martial law. General Zia initially said elections would be held under the 1973 constitution, but later detained Bhutto to face trial by a military court.
My pakistan
Zulfikar Ali Bhutto dedicated his life to serving Pakistan and empowering its people. As prime minister in the 1970s, he helped rebuild Pakistan after its breakup by establishing peace with India, developing the economy through industrialization and land reform, and creating Pakistan's first constitution. However, his efforts to shift Pakistan away from Western alliances and his advocacy for a New World Economic Order led to his overthrow in a 1977 military coup and eventual execution in 1979 after a controversial trial. Bhutto believed he was assassinated because he refused to compromise Pakistan's interests, and his death left the nation feeling orphaned.
Marching towards democracy
This document is an introduction to a collection of speeches by Zulfikar Ali Bhutto from 1970-1971 as Pakistan was transitioning from military rule to democracy. The introduction provides background on Ayub Khan resigning as President and handing power to General Yahya Khan. It then summarizes some of Bhutto's key speeches and policies during this time period, including advocating for Islamic socialism, opposing military rule, and campaigning for democracy and economic reforms to help the poor and working classes. Bhutto and his Pakistan People's Party swept elections in West Pakistan due to their message and inclusion of candidates from all classes.
Last dayf of premier bhutto
1) The author is awakened in the middle of the night by his son, who tells him that armed men have climbed onto their roof. When the author goes to investigate, he finds soldiers pointing rifles at him from the balcony.
2) The soldiers inform the author that they are there to arrest him, not shoot him. They take the author away without letting him bring any personal belongings.
3) The author is transported along with other politicians to an office building, where they realize the military has staged a coup, though it is still unclear who is leading it or where Prime Minister Bhutto is.
Interview with-history
This document summarizes an interview between Italian journalist Oriana Fallaci and Pakistani leader Zulfikar Ali Bhutto in 1972. It provides background on Fallaci's career interviewing international leaders. The interview with Bhutto took place over 6 days and covered many topics. Bhutto was a complex figure - educated abroad but still traditional, interested in socialism but with fascists books. He strongly disliked India's Indira Gandhi. Bhutto denied involvement in a recent massacre in Bangladesh but Fallaci questioned this. The interview caused a diplomatic incident when published.
He was not_hanged
This document provides background on Zulfikar Ali Bhutto, the former Prime Minister of Pakistan who was executed in 1979. It discusses the author's history supporting Bhutto in the 1960s-70s through various roles in journalism before becoming disillusioned. However, after Zia ul-Haq took power in a military coup in 1977, the author realized Bhutto had faced significant constraints from powerful status quo forces. The document aims to provide future generations the true facts about Bhutto and determine if he was a demagogue, murderer or martyr for democracy in Pakistan. It explores Bhutto's vision and challenges in bringing change while up against powerful opponents.
More from YAWAR HASSAN KHAN (20)
Zulfikar ali bhutto recollections and remembrances
Zulfikar ali bhutto recollections and remembrances
Recently uploaded
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART INDIA MATKA KALYAN SATTA MATKA 420 INDIAN MATKA SATTA KING MATKA FIX JODI FIX FIX FIX SATTA NAMBAR MATKA INDIA SATTA BATTA
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...
Time and again, the business group has taken up new business ventures, each of which has allowed it to expand its horizons further and reach new heights. Even amidst the Adani CBI Investigation, the firm has always focused on improving its cement business.
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
AI Transformation Playbook: Thinking AI-First for Your Business
I dive into how businesses can stay competitive by integrating AI into their core processes. From identifying the right approach to building collaborative teams and recognizing common pitfalls, this guide has got you covered. AI transformation is a journey, and this playbook is here to help you navigate it successfully.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Discover the Beauty and Functionality of The Expert Remodeling Service
Unlock your kitchen's true potential with expert remodeling services from O'Brien Group Inc. Transform your space into a functional, modern, and luxurious haven with their experienced professionals. From layout reconfiguration to high-end upgrades, they deliver stunning results tailored to your style and needs. Visit obriengroupinc.com to elevate your kitchen's beauty and functionality today.
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar.High-Quality IPTV Monthly Subscription for $15
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...
Presentation by Herman Kienhuis (Curiosity VC) on developments in AI, the venture capital investment landscape and Curiosity VC's approach to investing, at the alumni event of Amsterdam Business School (University of Amsterdam) on June 13, 2024 in Amsterdam.
8328958814KALYAN MATKA | MATKA RESULT | KALYAN
8328958814KALYAN MATKA | MATKA RESULT | KALYAN KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...YourLegal Accounting
Effective financial management is important for expansion and scalability in the ever-changing US business environment. White Label Bookkeeping services is an innovative solution that is becoming more and more popular among businesses. These services provide a special method for managing financial duties effectively, freeing up companies to concentrate on their main operations and growth plans. We’ll look at how White Label Bookkeeping can help US firms expand and develop in this blog.Kirill Klip GEM Royalty TNR Gold Lithium Presentation
Lithium Will Power Us For The Next 50 Years And Then Robots: Kirill Klip GEM Royalty TNR Gold Lithium Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
Recently uploaded (20)
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
The Most Inspiring Entrepreneurs to Follow in 2024.pdf
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
1Q24_HYUNDAI CAPITAL SERVICES INC. AND SUBSIDIARIES
AI Transformation Playbook: Thinking AI-First for Your Business
AI Transformation Playbook: Thinking AI-First for Your Business
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Discover the Beauty and Functionality of The Expert Remodeling Service
Discover the Beauty and Functionality of The Expert Remodeling Service
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...
The Role of White Label Bookkeeping Services in Supporting the Growth and Sca...
Kirill Klip GEM Royalty TNR Gold Lithium Presentation
Kirill Klip GEM Royalty TNR Gold Lithium Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
99772229 hazard-analysis-and-control
- 2. INTRODUCTION Thispresentation is a summary of osha study guide 704 “ hazard analysis and control”
- 3. BASIC EMPLOYER RESPONSIBILITY Theemployer should see that workers are properly instructed and supervised in the safe operation of any machinery tools , equipment , process or practice which they are authorized to use or apply
- 4. BASIC EMPLOYEE RESPONSIBILITY All employees should conduct their work in compliance with their employer’s safety policies and rules. Employees should report all injuries immediately to the person in charge or other responsible representative of the employer .employees should make full use of safeguards provided for their protection
- 5. SAFETY INSPECTIONS Employersshould make sure their workplace are inspected by a qualified person as often as the type of operation or the character of the equipment requires.
- 6. HAZARDS Raw materials Toxic chemicals Stationary machinery equipment may not be properly guarded / or in poor working order Tools may not be properly maintained Extreme noise in work environment Poor work station designs Flammable or combustible atmospheres Floors may be slippery and aisles cluttered Guard rails , ladders or floor hole covers may be missing or damage Employees might be fatigued , distracted in some way , or other wise lack the physical / mental way , or working safely
- 7. HAZARD Unsafework conditions or practices that could cause injuries or illness to employees
- 8. Recognized hazards Industry recognition Employee recognition Common sense recognition
- 9. Exposure Physical Environmental potential
- 10. Six steps hazard control process Identifying workplace hazards Analyzing the workplace Developing solution Writing solution Writing recommendations Taking action Evaluating the results
- 11. Five general hazards Material Equipment Environment People system
- 12. 13 hazard categories Acceleration Biological Chemical reactions Electrical Ergonomics Explosives and explosions Flammability and fires Temprature Mechanical Pressure Radiation Toxics Vibration / noise
- 13. Identifying hazards informal and formal observation programs Comprehensive wide surveys Individual interviews Walk around inspection Documentation review
- 14. A written record will help ensure Assignment of responsibility for hazard correction Tracking of correction to completion Identification of problems in the control system Identification of problems in the accountability system Identifcation of hazards for which no prevention or control has been planned
- 15. 4 analysis Job hazard analysis change analysis Process hazard analysis Phase hazard analysis
- 16. Hierarchy of control Elimination Substitution Engineering controls Administrative controls Personal protective equipment
- 17. Solving safety problems-two key strategies Eliminate or reduce the surface cause Eliminate or reduce he root cause
- 18. Cause effect analysis Every effect is the result of a cause
- 19. Key steps to develop effective recommendations Write the problem statement Describe the history of problem State the solution options that would correct the problem Describe the consequences as a cost. Vs . Benefit analysis
- 20. Thankyou Please give your feedback @ yawikhan@hotmail.com