802.11ax ,IPQ 6018
•
0 likes•245 views
The document describes the DR6018 dual-band 11ax MU-MIMO OFDMA wireless module. It has a quad-core 1.8GHz processor, 1GB RAM, and supports 2.4GHz and 5GHz 802.11ax with up to 573Mbps and 1201Mbps speeds respectively. It is designed for applications like 802.11ax MU-MIMO access points, mesh routers, and smart APs in environments like offices and factories.
Report
Share
Report
Share
Download to read offline
Recommended
Amba bus
The AMBA specification defines standards for on-chip communication in microcontrollers. It includes three bus standards: Advanced High-performance Bus (AHB) for high bandwidth communication, Advanced System Bus (ASB) and Advanced Peripheral Bus (APB) for lower bandwidth peripherals. The objectives are to facilitate right-first-time development, be technology independent, encourage modular design, and minimize infrastructure. A typical system has the CPU and memory on the high-performance AHB, with peripherals on the lower-bandwidth APB, connected via a bridge.
Multithreaded processors ppt
Computer Architecture,
Comparison between 3 kinds of processors - Interleaved multithreading, blocked multithreading and simultaneous multithreading.
ASIC design verification
The document provides an overview of the ASIC design and verification process. It discusses the key stages of ASIC design including specification, high-level design, micro design, RTL coding, simulation, synthesis, place and route, and post-silicon validation. It then describes the importance of verification, including why 70% of design time and costs are spent on verification. The verification process uses testbenches, directed and constrained-random testing, and functional coverage to verify the design matches specifications. Verification of more complex designs like FPGAs, SOCs is also discussed.
Connection Machine
The Connection Machine (CM) was a massively parallel supercomputer architecture developed in the 1980s and 1990s. It featured up to 65,536 simple processing elements connected via a hypercube network (CM-1, CM-2) or fat tree network (CM-5). The CM was developed by Thinking Machines Corporation and funded by DARPA to support neural network and artificial intelligence applications. The CM-5 in particular used off-the-shelf SPARC processors and custom vector coprocessors with a separate control network to coordinate work across the parallel system. The CM architecture pioneered many concepts still used in parallel computing today.
YARN Federation
This document discusses YARN federation, which allows multiple YARN clusters to be connected together. It summarizes:
- YARN is used at Microsoft for resource management but faces challenges of large scale and diverse workloads. Federation aims to address this.
- The federation architecture connects multiple independent YARN clusters through centralized services for routing, policies, and state. Applications are unaware and can seamlessly run across clusters.
- Federation policies determine how work is routed and scheduled across clusters, balancing objectives like load balancing, scaling, fairness, and isolation. A spectrum of policy options is discussed from full partitioning to full replication to dynamic partial replication.
- A demo is presented showing a job running across
MySQL Replication Overview -- PHPTek 2016
MySQL replication allows data changes on a master server to be replicated to slave servers. It works by copying the master's binary log containing data changes to slaves. Replication can be statement-based, replicating SQL statements, or row-based, replicating row-level changes. Modern MySQL supports multi-threaded and multi-source replication topologies to improve performance and high availability. Utilities like mysqlrplcheck help configure and validate replication setups.
Chapter 8 : Memory
This document discusses memory management techniques used in operating systems, including:
- Base and limit registers that define the logical address space and protect memory accesses.
- Address binding from source code to executable addresses at different stages.
- The memory management unit (MMU) that maps virtual to physical addresses using base/limit registers.
- Segmentation architecture that divides memory into logical segments like code, data, stack, heap.
hive lab
Hive is a data warehousing infrastructure built on Hadoop that allows users to query and analyze large datasets using SQL-like queries. This document provides an overview of Hive and demonstrates how to use basic Hive commands such as creating and altering tables, importing and exporting data, running queries, and more. Key points covered include the differences between managed and external tables, Hive data types and units, and how to perform operations like selecting, filtering, and limiting query results.
Recommended
Amba bus
The AMBA specification defines standards for on-chip communication in microcontrollers. It includes three bus standards: Advanced High-performance Bus (AHB) for high bandwidth communication, Advanced System Bus (ASB) and Advanced Peripheral Bus (APB) for lower bandwidth peripherals. The objectives are to facilitate right-first-time development, be technology independent, encourage modular design, and minimize infrastructure. A typical system has the CPU and memory on the high-performance AHB, with peripherals on the lower-bandwidth APB, connected via a bridge.
Multithreaded processors ppt
Computer Architecture,
Comparison between 3 kinds of processors - Interleaved multithreading, blocked multithreading and simultaneous multithreading.
ASIC design verification
The document provides an overview of the ASIC design and verification process. It discusses the key stages of ASIC design including specification, high-level design, micro design, RTL coding, simulation, synthesis, place and route, and post-silicon validation. It then describes the importance of verification, including why 70% of design time and costs are spent on verification. The verification process uses testbenches, directed and constrained-random testing, and functional coverage to verify the design matches specifications. Verification of more complex designs like FPGAs, SOCs is also discussed.
Connection Machine
The Connection Machine (CM) was a massively parallel supercomputer architecture developed in the 1980s and 1990s. It featured up to 65,536 simple processing elements connected via a hypercube network (CM-1, CM-2) or fat tree network (CM-5). The CM was developed by Thinking Machines Corporation and funded by DARPA to support neural network and artificial intelligence applications. The CM-5 in particular used off-the-shelf SPARC processors and custom vector coprocessors with a separate control network to coordinate work across the parallel system. The CM architecture pioneered many concepts still used in parallel computing today.
YARN Federation
This document discusses YARN federation, which allows multiple YARN clusters to be connected together. It summarizes:
- YARN is used at Microsoft for resource management but faces challenges of large scale and diverse workloads. Federation aims to address this.
- The federation architecture connects multiple independent YARN clusters through centralized services for routing, policies, and state. Applications are unaware and can seamlessly run across clusters.
- Federation policies determine how work is routed and scheduled across clusters, balancing objectives like load balancing, scaling, fairness, and isolation. A spectrum of policy options is discussed from full partitioning to full replication to dynamic partial replication.
- A demo is presented showing a job running across
MySQL Replication Overview -- PHPTek 2016
MySQL replication allows data changes on a master server to be replicated to slave servers. It works by copying the master's binary log containing data changes to slaves. Replication can be statement-based, replicating SQL statements, or row-based, replicating row-level changes. Modern MySQL supports multi-threaded and multi-source replication topologies to improve performance and high availability. Utilities like mysqlrplcheck help configure and validate replication setups.
Chapter 8 : Memory
This document discusses memory management techniques used in operating systems, including:
- Base and limit registers that define the logical address space and protect memory accesses.
- Address binding from source code to executable addresses at different stages.
- The memory management unit (MMU) that maps virtual to physical addresses using base/limit registers.
- Segmentation architecture that divides memory into logical segments like code, data, stack, heap.
hive lab
Hive is a data warehousing infrastructure built on Hadoop that allows users to query and analyze large datasets using SQL-like queries. This document provides an overview of Hive and demonstrates how to use basic Hive commands such as creating and altering tables, importing and exporting data, running queries, and more. Key points covered include the differences between managed and external tables, Hive data types and units, and how to perform operations like selecting, filtering, and limiting query results.
Distributed Database Management System
This presentation several topics of subjects RDBMS and DBMS including Distributed Database Design,Architecture of Distributed database processing system,Data Communication concept,Concurrency control and recovery. All the topics are briefly described according to syllabus of BCA II and BCA III year subjects.
Computer organization memory
The document discusses the memory system in computers including main memory, cache memory, and different types of memory chips. It provides details on the following key points in 3 sentences:
The document discusses the different levels of memory hierarchy including main memory, cache memory, and auxiliary memory. It describes the basic concepts of memory including addressing schemes, memory access time, and memory cycle time. Examples of different types of memory chips are discussed such as SRAM, DRAM, ROM, and cache memory organization and mapping techniques.
Parallel processing
Parallel computing is a type of computation in which many calculations or the execution of processes are carried out simultaneously. Large problems can often be divided into smaller ones, which can then be solved at the same time. There are several different forms of parallel computing: bit-level, instruction-level, data, and task parallelism. Parallelism has been employed for many years, mainly in high-performance computing, but interest in it has grown lately due to the physical constraints preventing frequency scaling. As power consumption (and consequently heat generation) by computers has become a concern in recent years, parallel computing has become the dominant paradigm in computer architecture, mainly in the form of multi-core processors.
Spark tuning
The document discusses tuning Spark parameters to optimize performance. It describes how to control Spark's resource usage through parameters like num-executors, executor-cores, and executor-memory. Advanced parameters like spark.shuffle.memoryFraction and spark.reducer.maxSizeInFlight are also covered. Dynamic allocation allows scaling resources up and down based on workload. Tips provided include tuning memory usage, choosing serialization and storage levels, setting parallelism, and avoiding operations like groupByKey. An example recommends tuning the collaborative filtering algorithm in the RW project, reducing runtime from 27 minutes to under 7 minutes.
RISC - Reduced Instruction Set Computing
This document discusses RISC (Reduced Instruction Set Computer) architecture. It includes a member list, outline of topics to be covered, and acknowledgements. The main topics covered are what RISC is, the background and history of RISC, characteristics of RISC like simplified instructions and pipelining, differences between RISC and CISC, performance equations, and applications of RISC like in mobile systems, high-end computing, and ARM and MIPS architectures. It concludes that over time, the differences between RISC and CISC have blurred as they have adopted each other's strategies.
Parallel Processing Concepts
This document discusses parallel processing concepts including:
1. Parallel computing involves simultaneously using multiple processing elements to solve problems faster than a single processor. Common parallel platforms include shared-memory and message-passing architectures.
2. Key considerations for parallel platforms include the control structure for specifying parallel tasks, communication models, and physical organization including interconnection networks.
3. Scalable design principles for parallel systems include avoiding single points of failure, pushing work away from the core, and designing for maintenance and automation. Common parallel architectures include N-wide superscalar, which can dispatch N instructions per cycle, and multi-core which places multiple cores on a single processor socket.
Stage Level Scheduling Improving Big Data and AI Integration
In this talk, I will dive into the stage level scheduling feature added to Apache Spark 3.1. Stage level scheduling extends upon Project Hydrogen by improving big data ETL and AI integration and also enables multiple other use cases. It is beneficial any time the user wants to change container resources between stages in a single Apache Spark application, whether those resources are CPU, Memory or GPUs. One of the most popular use cases is enabling end-to-end scalable Deep Learning and AI to efficiently use GPU resources. In this type of use case, users read from a distributed file system, do data manipulation and filtering to get the data into a format that the Deep Learning algorithm needs for training or inference and then sends the data into a Deep Learning algorithm. Using stage level scheduling combined with accelerator aware scheduling enables users to seamlessly go from ETL to Deep Learning running on the GPU by adjusting the container requirements for different stages in Spark within the same application. This makes writing these applications easier and can help with hardware utilization and costs.
There are other ETL use cases where users want to change CPU and memory resources between stages, for instance there is data skew or perhaps the data size is much larger in certain stages of the application. In this talk, I will go over the feature details, cluster requirements, the API and use cases. I will demo how the stage level scheduling API can be used by Horovod to seamlessly go from data preparation to training using the Tensorflow Keras API using GPUs.
The talk will also touch on other new Apache Spark 3.1 functionality, such as pluggable caching, which can be used to enable faster dataframe access when operating from GPUs.
Shared-Memory Multiprocessors
The document discusses different types of parallel computer architectures, including shared-memory multiprocessors. It describes taxonomy of parallel computers including SISD, SIMD, MISD, and MIMD models. For shared-memory multiprocessors, it outlines consistency models including strict, sequential, processor, weak and release consistency. It also discusses UMA and NUMA architectures, cache coherence protocols like MESI, and examples of multiprocessors using crossbar switches or multistage networks.
SPOOLING.ppt
Simultaneous Peripheral Operation On- Line.
Spooling overlaps input of one job with the computation of other job.
Axi protocol
AXI is an on-chip, point to point communication protocol. It is used as a high-performance bus in various IP or SoC Systems. It is used for connecting high-performance processors with memory.
SYNCHRONIZATION
This document presents an overview of process synchronization techniques. It discusses the critical section problem and provides solutions like Peterson's algorithm and semaphores. Classical synchronization problems like the bounded buffer, readers-writers, and dining philosophers problems are explained. The document also covers concepts like deadlock, starvation, and monitors. The objectives are to introduce software and hardware solutions for shared data consistency and describe mechanisms for ensuring atomic transactions.
IBM Spectrum Scale Security
IBM Spectrum Scale 4.2.3 provides concise security capabilities including:
1) Secure data at rest through encryption and secure deletion capabilities as well as support for NIST algorithms.
2) Secure data in transit with support for Kerberos, SSL/TLS, and configurable security levels for cluster communication.
3) Role-based access control and support for directory services like Active Directory for authentication and authorization.
4) Secure administration through SSH/TLS for commands and REST APIs, role-based access in the GUI, and limited admin nodes.
5) Additional features like file and object access control lists, firewall support, immutability mode for compliance, and audit logging.
Instruction Set of 8086 Microprocessor
instruction set of 8086 microprocessor has following categories:
-Data transfer instructions
-Arithmetic instructions
-Logical instructions
-Flag manipulation instructions
-shift and rotate instructions
-String instructions
-8086 assembler directives
Introduction to Sharding
This document provides an overview of MongoDB sharding. It discusses how MongoDB addresses the need for horizontal scalability as data and throughput needs exceed the capabilities of a single machine. MongoDB uses sharding to partition data across multiple machines or shards. The key points are:
- MongoDB shards or partitions data by a shard key, distributing data ranges across shards for scalability.
- A configuration server stores metadata about sharding setup and chunk distribution. Mongos instances route queries to appropriate shards.
- MongoDB automatically splits and migrates chunks as data grows to balance load across shards.
- Setting up sharding in MongoDB requires minimal configuration and provides a consistent interface like a single database.
Schema-on-Read vs Schema-on-Write
This is the first time I introduced the concept of Schema-on-Read vs Schema-on-Write to the public. It was at Berkeley EECS RAD Lab retreat Open Mic Session on May 28th, 2009 at Santa Cruz, California.
Misc
This document discusses the MISC (Minimal Instruction Set Computer) architecture. MISC aims to reduce the number of supported instructions to only essential ones required for microprocessor functioning. MISC has fewer instructions than RISC but can synthesize instructions from simpler ones. Key components of MISC include a central memory, instruction buffer, control unit, I/O control unit, functional units, register files and data routing circuit. While MISC has lower performance than architectures using parallelism, it has been used commercially in spacecraft and the INMOS transputer.
AMBA 2.0 REPORT
This document summarizes the approval of a seminar titled "Implementation of Advance High performance Bus using verilog" presented by Nirav Desai for the degree of Master of Technology. It lists the examiners and is signed by the supervisor, head of department, and includes the date and place.
The next sections include a declaration signed by Nirav Desai about original work and adherence to academic honesty. An acknowledgment section thanks the seminar guide and head of department for their support and guidance.
The abstract provides a high-level overview, stating that the purpose is to propose a scheme to implement an AMBA bus protocol specification using Verilog. It will cover bus basics, AMBA bus
Spi in arm7(lpc2148)
its only for learning purpose for beginners who wants to understand this protocol.
Life is all about learning, hope u will enjoy in this my PPT.
for any suggestion your always welcome .
Advanced Pipelining in ARM Processors.pptx
The document discusses advanced pipelining techniques in ARM processors. It begins with an overview of pipelining and its benefits of improving throughput by executing multiple instructions simultaneously. ARM processors implement different numbers of pipeline stages - 3 stages in ARM7, 5 stages in ARM9, 6 stages in ARM10, and 7 stages in ARM11. Issues like control hazards, data hazards, and interrupts are addressed through techniques like data forwarding, branch prediction, and out-of-order execution. The 6-stage pipeline in ARM10 achieves double the throughput of ARM7 while compromising on latency. Branch target buffers are used to reduce delays from branch instructions. The 7-stage pipeline in ARM11 and above further improves performance using advanced data
VTU 6th Sem Elective CSE - Module 3 cloud computing
The document discusses parallel and distributed computing concepts in Aneka including multiprocessing, multithreading, task-based programming, and parameter sweep applications. It describes key aspects of implementing parallel applications in Aneka such as defining tasks, managing task execution, file handling, and tools for developing parameter sweep jobs. The document also provides an overview of how workflow managers can interface with Aneka.
St5817 h specification
The document describes the specifications of the ST5817H wireless access point equipment. It has features such as IEEE 802.11a/n compliance, an Atheros 560MHz networking processor, up to 26dBm output power, up to 300Mbps physical data rates, and an integrated 17dBi dual-polarization antenna. It also provides details on its processor, memory, interfaces, power consumption, operating conditions, dimensions, and wireless transmission power and receiver sensitivity levels.
St543 jz specification-www.ttbvs.com
The ST543JZ is an IEEE 802.11a/n compliant wireless bridge with an integrated 18dBi dual-polarization antenna. It supports data rates up to 300Mbps and has a transmission power up to 26dBm. The weatherproof casing allows for outdoor installation and the passive PoE enables long range transmission over 5GHz wireless links of up to 100 clients.
More Related Content
What's hot
Distributed Database Management System
This presentation several topics of subjects RDBMS and DBMS including Distributed Database Design,Architecture of Distributed database processing system,Data Communication concept,Concurrency control and recovery. All the topics are briefly described according to syllabus of BCA II and BCA III year subjects.
Computer organization memory
The document discusses the memory system in computers including main memory, cache memory, and different types of memory chips. It provides details on the following key points in 3 sentences:
The document discusses the different levels of memory hierarchy including main memory, cache memory, and auxiliary memory. It describes the basic concepts of memory including addressing schemes, memory access time, and memory cycle time. Examples of different types of memory chips are discussed such as SRAM, DRAM, ROM, and cache memory organization and mapping techniques.
Parallel processing
Parallel computing is a type of computation in which many calculations or the execution of processes are carried out simultaneously. Large problems can often be divided into smaller ones, which can then be solved at the same time. There are several different forms of parallel computing: bit-level, instruction-level, data, and task parallelism. Parallelism has been employed for many years, mainly in high-performance computing, but interest in it has grown lately due to the physical constraints preventing frequency scaling. As power consumption (and consequently heat generation) by computers has become a concern in recent years, parallel computing has become the dominant paradigm in computer architecture, mainly in the form of multi-core processors.
Spark tuning
The document discusses tuning Spark parameters to optimize performance. It describes how to control Spark's resource usage through parameters like num-executors, executor-cores, and executor-memory. Advanced parameters like spark.shuffle.memoryFraction and spark.reducer.maxSizeInFlight are also covered. Dynamic allocation allows scaling resources up and down based on workload. Tips provided include tuning memory usage, choosing serialization and storage levels, setting parallelism, and avoiding operations like groupByKey. An example recommends tuning the collaborative filtering algorithm in the RW project, reducing runtime from 27 minutes to under 7 minutes.
RISC - Reduced Instruction Set Computing
This document discusses RISC (Reduced Instruction Set Computer) architecture. It includes a member list, outline of topics to be covered, and acknowledgements. The main topics covered are what RISC is, the background and history of RISC, characteristics of RISC like simplified instructions and pipelining, differences between RISC and CISC, performance equations, and applications of RISC like in mobile systems, high-end computing, and ARM and MIPS architectures. It concludes that over time, the differences between RISC and CISC have blurred as they have adopted each other's strategies.
Parallel Processing Concepts
This document discusses parallel processing concepts including:
1. Parallel computing involves simultaneously using multiple processing elements to solve problems faster than a single processor. Common parallel platforms include shared-memory and message-passing architectures.
2. Key considerations for parallel platforms include the control structure for specifying parallel tasks, communication models, and physical organization including interconnection networks.
3. Scalable design principles for parallel systems include avoiding single points of failure, pushing work away from the core, and designing for maintenance and automation. Common parallel architectures include N-wide superscalar, which can dispatch N instructions per cycle, and multi-core which places multiple cores on a single processor socket.
Stage Level Scheduling Improving Big Data and AI Integration
In this talk, I will dive into the stage level scheduling feature added to Apache Spark 3.1. Stage level scheduling extends upon Project Hydrogen by improving big data ETL and AI integration and also enables multiple other use cases. It is beneficial any time the user wants to change container resources between stages in a single Apache Spark application, whether those resources are CPU, Memory or GPUs. One of the most popular use cases is enabling end-to-end scalable Deep Learning and AI to efficiently use GPU resources. In this type of use case, users read from a distributed file system, do data manipulation and filtering to get the data into a format that the Deep Learning algorithm needs for training or inference and then sends the data into a Deep Learning algorithm. Using stage level scheduling combined with accelerator aware scheduling enables users to seamlessly go from ETL to Deep Learning running on the GPU by adjusting the container requirements for different stages in Spark within the same application. This makes writing these applications easier and can help with hardware utilization and costs.
There are other ETL use cases where users want to change CPU and memory resources between stages, for instance there is data skew or perhaps the data size is much larger in certain stages of the application. In this talk, I will go over the feature details, cluster requirements, the API and use cases. I will demo how the stage level scheduling API can be used by Horovod to seamlessly go from data preparation to training using the Tensorflow Keras API using GPUs.
The talk will also touch on other new Apache Spark 3.1 functionality, such as pluggable caching, which can be used to enable faster dataframe access when operating from GPUs.
Shared-Memory Multiprocessors
The document discusses different types of parallel computer architectures, including shared-memory multiprocessors. It describes taxonomy of parallel computers including SISD, SIMD, MISD, and MIMD models. For shared-memory multiprocessors, it outlines consistency models including strict, sequential, processor, weak and release consistency. It also discusses UMA and NUMA architectures, cache coherence protocols like MESI, and examples of multiprocessors using crossbar switches or multistage networks.
SPOOLING.ppt
Simultaneous Peripheral Operation On- Line.
Spooling overlaps input of one job with the computation of other job.
Axi protocol
AXI is an on-chip, point to point communication protocol. It is used as a high-performance bus in various IP or SoC Systems. It is used for connecting high-performance processors with memory.
SYNCHRONIZATION
This document presents an overview of process synchronization techniques. It discusses the critical section problem and provides solutions like Peterson's algorithm and semaphores. Classical synchronization problems like the bounded buffer, readers-writers, and dining philosophers problems are explained. The document also covers concepts like deadlock, starvation, and monitors. The objectives are to introduce software and hardware solutions for shared data consistency and describe mechanisms for ensuring atomic transactions.
IBM Spectrum Scale Security
IBM Spectrum Scale 4.2.3 provides concise security capabilities including:
1) Secure data at rest through encryption and secure deletion capabilities as well as support for NIST algorithms.
2) Secure data in transit with support for Kerberos, SSL/TLS, and configurable security levels for cluster communication.
3) Role-based access control and support for directory services like Active Directory for authentication and authorization.
4) Secure administration through SSH/TLS for commands and REST APIs, role-based access in the GUI, and limited admin nodes.
5) Additional features like file and object access control lists, firewall support, immutability mode for compliance, and audit logging.
Instruction Set of 8086 Microprocessor
instruction set of 8086 microprocessor has following categories:
-Data transfer instructions
-Arithmetic instructions
-Logical instructions
-Flag manipulation instructions
-shift and rotate instructions
-String instructions
-8086 assembler directives
Introduction to Sharding
This document provides an overview of MongoDB sharding. It discusses how MongoDB addresses the need for horizontal scalability as data and throughput needs exceed the capabilities of a single machine. MongoDB uses sharding to partition data across multiple machines or shards. The key points are:
- MongoDB shards or partitions data by a shard key, distributing data ranges across shards for scalability.
- A configuration server stores metadata about sharding setup and chunk distribution. Mongos instances route queries to appropriate shards.
- MongoDB automatically splits and migrates chunks as data grows to balance load across shards.
- Setting up sharding in MongoDB requires minimal configuration and provides a consistent interface like a single database.
Schema-on-Read vs Schema-on-Write
This is the first time I introduced the concept of Schema-on-Read vs Schema-on-Write to the public. It was at Berkeley EECS RAD Lab retreat Open Mic Session on May 28th, 2009 at Santa Cruz, California.
Misc
This document discusses the MISC (Minimal Instruction Set Computer) architecture. MISC aims to reduce the number of supported instructions to only essential ones required for microprocessor functioning. MISC has fewer instructions than RISC but can synthesize instructions from simpler ones. Key components of MISC include a central memory, instruction buffer, control unit, I/O control unit, functional units, register files and data routing circuit. While MISC has lower performance than architectures using parallelism, it has been used commercially in spacecraft and the INMOS transputer.
AMBA 2.0 REPORT
This document summarizes the approval of a seminar titled "Implementation of Advance High performance Bus using verilog" presented by Nirav Desai for the degree of Master of Technology. It lists the examiners and is signed by the supervisor, head of department, and includes the date and place.
The next sections include a declaration signed by Nirav Desai about original work and adherence to academic honesty. An acknowledgment section thanks the seminar guide and head of department for their support and guidance.
The abstract provides a high-level overview, stating that the purpose is to propose a scheme to implement an AMBA bus protocol specification using Verilog. It will cover bus basics, AMBA bus
Spi in arm7(lpc2148)
its only for learning purpose for beginners who wants to understand this protocol.
Life is all about learning, hope u will enjoy in this my PPT.
for any suggestion your always welcome .
Advanced Pipelining in ARM Processors.pptx
The document discusses advanced pipelining techniques in ARM processors. It begins with an overview of pipelining and its benefits of improving throughput by executing multiple instructions simultaneously. ARM processors implement different numbers of pipeline stages - 3 stages in ARM7, 5 stages in ARM9, 6 stages in ARM10, and 7 stages in ARM11. Issues like control hazards, data hazards, and interrupts are addressed through techniques like data forwarding, branch prediction, and out-of-order execution. The 6-stage pipeline in ARM10 achieves double the throughput of ARM7 while compromising on latency. Branch target buffers are used to reduce delays from branch instructions. The 7-stage pipeline in ARM11 and above further improves performance using advanced data
VTU 6th Sem Elective CSE - Module 3 cloud computing
The document discusses parallel and distributed computing concepts in Aneka including multiprocessing, multithreading, task-based programming, and parameter sweep applications. It describes key aspects of implementing parallel applications in Aneka such as defining tasks, managing task execution, file handling, and tools for developing parameter sweep jobs. The document also provides an overview of how workflow managers can interface with Aneka.
What's hot (20)
Stage Level Scheduling Improving Big Data and AI Integration
Stage Level Scheduling Improving Big Data and AI Integration
VTU 6th Sem Elective CSE - Module 3 cloud computing
VTU 6th Sem Elective CSE - Module 3 cloud computing
Similar to 802.11ax ,IPQ 6018
St5817 h specification
The document describes the specifications of the ST5817H wireless access point equipment. It has features such as IEEE 802.11a/n compliance, an Atheros 560MHz networking processor, up to 26dBm output power, up to 300Mbps physical data rates, and an integrated 17dBi dual-polarization antenna. It also provides details on its processor, memory, interfaces, power consumption, operating conditions, dimensions, and wireless transmission power and receiver sensitivity levels.
St543 jz specification-www.ttbvs.com
The ST543JZ is an IEEE 802.11a/n compliant wireless bridge with an integrated 18dBi dual-polarization antenna. It supports data rates up to 300Mbps and has a transmission power up to 26dBm. The weatherproof casing allows for outdoor installation and the passive PoE enables long range transmission over 5GHz wireless links of up to 100 clients.
Huaptec tarec in partner web-site
Huaptec is a leading manufacturer of mobile signal enhancement solutions that exports products to over 40 countries. It has regional offices in Europe, the USA, and India, with over 8000 items produced per month by more than 340 employees. Huaptec develops independent research and has 18 invention patents. It produces high-performance, innovative products that comply with international standards and undergo multi-step quality control.
Ice3 Wimax Base Station
ICE 3 is a compact outdoor WiMAX base station unit that operates in the 3.4-3.6 GHz band. It integrates power supply, channel card, and RF parts into a single box for faster and cheaper installation with a smaller footprint. The ICE 3 supports WiMAX wave 2 standards with features such as scalable OFDMA and MIMO. It can deliver high-bandwidth services such as residential data, corporate broadband, and high quality VoIP.
Wireless Catalog - Inter. Clouds 2016
The document is a 2016 catalog from Interstellar-Clouds Technology that provides an overview of their wireless product lines. It includes introductions to their outdoor wireless devices, router series, portable modems, USB dongles, access points, powerline adapters, and managed/unmanaged switches. For each product line, it lists example models and their specifications such as supported technologies, throughput, antenna types, and distance capabilities. It encourages readers to contact their support teams for pricing or other inquiries.
R5000 mmxbs-5x-300-2x500-2x16(2)
This product datasheet describes an InfiMAN 2x2 R5000-Mmxbs/5X.300.2x500.2x16 5 GHz base station sector that can provide up to 240 Mbps of net throughput with an integrated dual-polarized sectorial antenna with a gain of 16 dBi and beamwidth of 90x8 degrees. Key features include MIMO 2x2 technology, modulation schemes up to QAM64 5/6, a transmit power up to 27 dBm, and frequency range of 4900-6050 MHz. The outdoor unit has dimensions of 371 x 371 x 90 mm and weighs 3.4 kg.
Nano beam ac_gen2_ds
The document describes the NanoBeam 5AC Gen 2, an airMAX ac CPE device with the following key features:
1) It has a dedicated Wi-Fi radio for management and airMAX ac processing for superior performance.
2) Its uniform beamwidth design maximizes noise immunity while its integrated design creates a compact footprint.
3) It supports the latest airMAX ac protocol for high throughput up to 450+ Mbps and long-range connectivity.
Mimosa-by-Airspan-B5-Datasheet_DS-0009-11.pdf
The Mimosa B5 backhaul radio is:
- The easiest to use and highest capacity unlicensed 5 GHz backhaul solution for short and mid-range links, ideal for collocation, relay sites, and building-to-building settings.
- Capable of throughput up to 1.5 Gbps and latency under 1 ms, with integrated high-gain antennas that allow for installation in minutes.
- Features unique GPS synchronization technology that allows it to reuse channels across multiple links without interference as well as automatic interference mitigation.
hainway CC66 Mobile Computer
Chainway C66 is a newly-developed rugged handheld computer with strong extensibility. Built with Android 7.1 / 9.0(coming soon) OS and Qualcomm Octa-Core processor, it features 5.5-inch large display, powerful removable battery, supports quick charge and trigger handle. And it offers optional barcode scanning, RFID, NFC, etc. This mobile computer supports R6 UHF sled for good extensibility that can meet the needs in logistics, warehousing, manufacturing, retail, asset tracking, power patrol inspection, etc
Huaptec tarec in partner web-site 2
Huaptec is a leading manufacturer of mobile signal enhancement solutions, with over 8000 items produced per month. It has regional offices in Europe, the USA, and India, with over 340 employees, including 1/3 focused on R&D. Huaptec develops high-performance, innovative products that comply with international standards and undergo multi-step quality control processes.
ECB600 engenius
EnGenius ECB600 wifi. Giải pháp wifi cho văn phòng. Website: www.OneTel.com.vn
wifi engenius, engenius wifi,
EnGenius Indoor http://onetel.com.vn/Wifi-trong-nha_spc_243.html
EnGenius outdoor http://onetel.com.vn/Wifi-ngoai-troi_spc_244.html
Mọi yêu cầu tư vấn vui lòng liên hệ: 0903.05.1991
St2510 aw n-specification
This document summarizes the features and specifications of the ST2510AW-N 2.4GHz wireless digital network bridge transmission equipment. It has a high bandwidth of up to 150Mbps using 1x1 MIMO technology. It supports protocols like STP, QoS, and security encryptions. It has interfaces for wireless configuration, antenna connection, and Ethernet. Key specifications include IEEE 802.11n/b/g wireless standards, 32MB RAM, 8MB flash memory, and transmit power up to 27dBm for 802.11b and 23dBm for 802.11n.
Nsm5
This document provides specifications for Ubiquiti's NanoStation M and NanoStation Loco M compact, high-power 2x2 MIMO AirMax TDMA stations. The stations feature integrated antennas, compact and versatile designs, integrated AirMax technology, and are available in various frequency models. They are suitable for use as clients in point-to-multipoint networks or for creating point-to-point links, and their low cost and small form factor make them well-suited for different applications.
Gigabit Wi-Fi 802.11AC In Depth
This document summarizes key aspects of 802.11ac including:
- 802.11ac aims to support wireless speeds over 1Gbps for multi-station throughput and 500Mbps for single links.
- It utilizes wider 80/160MHz channels, more spatial streams up to 8, 256-QAM, and downlink multi-user MIMO.
- These new features and techniques are aimed at supporting bandwidth-intensive applications like wireless display and distribution of high-definition video content.
Gigabit wifi 802.11 ac in depth_peter thornycroft
This document summarizes key aspects of 802.11ac including:
- 802.11ac aims to support wireless speeds over 1Gbps for multi-station throughput and 500Mbps for single links.
- It utilizes wider 80/160MHz channels, more spatial streams up to 8, 256-QAM, and downlink multi-user MIMO.
- These new features and techniques are aimed at supporting bandwidth-intensive applications like wireless display and distribution of high-definition video content.
Sagittar LD (Long Distance) Series IP Radio Brochure
Sagittar LD (Long Distance) Series IP Radio are quick installation links that are designed to achieve the following data throughput speeds:
Sagittar LD Series 20Mbps@40km
Sagittar LD Series 8Mbps@100km
St5801 a specification
This document describes the ST5801A, a 30KM outdoor wireless digital bridge that can transmit and receive audio/video signals. It supports data transfer rates from 6-108Mbps and wireless connections between 1 to 16 points. The device is intended for use in expanding networks or providing coverage for businesses, schools, or remote areas. It can operate in temperatures from -30 to 70 degrees Celsius.
Infinity BS320 Datasheet
The document provides specifications for the Repeatit Infinity BS320 single-radio high performance Point to Multipoint Base Station. It supports external antennas for short to long distance Point to Multipoint environments. Key specifications include supporting 5/10/20/40 MHz channel widths, a capacity of 190 Mbps, 128-bit AES encryption, a maximum transmit power of 28 dBm, and a maximum receive sensitivity of -96 dBm. It also provides details on modulation techniques, surge protection, quality of service features, antenna and Ethernet interfaces, management protocols, environmental specifications, and dimensions.
Katalog5g hp
The document is a product datasheet for the Cirrus High Power Series CLOUDNET 5000M wireless access point. [1] It is a high-performance 5GHz outdoor wireless access point that provides secure, reliable point-to-multipoint connectivity for internet service providers and other organizations. [2] Key features include high speeds of up to 70Mbps, long range, multiple non-overlapping channels, robust security, and easy installation. [3] It is designed for applications such as wireless backhaul, redundant cellular backup, and providing internet access to remote areas.
Xliln Pw5 G by Hotware Taiwan
The XLINK-PW5G is a 5GHz wireless TDMA device that functions as a pre-WiMAX wireless bridge. It can connect over distances of up to 50km at speeds of up to 40Mbps. It has an IP68 rated enclosure to protect against dust and water. The device uses proprietary 5GHz OFDM radio technology and has various security, management, and monitoring features accessible via a web interface.
Similar to 802.11ax ,IPQ 6018 (20)
Sagittar LD (Long Distance) Series IP Radio Brochure
Sagittar LD (Long Distance) Series IP Radio Brochure
Recently uploaded
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Hematology Analyzer Machine - Complete Blood Count
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Recently uploaded (20)
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Hematology Analyzer Machine - Complete Blood Count
Hematology Analyzer Machine - Complete Blood Count
802.11ax ,IPQ 6018
- 1. http://www.wallystech.com/ 1 DR6018 11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD Features Quad-core ARM 64bit A53 @1.8GHz Processor 1GB DDRL3L System Memory 32MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS) 2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate 2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate Applications 802.11ax MU-MIMO OFDMA Access Point Mesh router supporting EasyMeshHotel Wireless application Smart AP TWT Product Description DR6018 based on IPQ6018 chipset is an enterprise wireless module integrated with 2x2 5G high power Radio module and 2x2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Absolute Maximum Rating Parameter Rating Unit Supply Voltage 24V~48 V Operating Temperature Range -40 to +70 ºC Storage Temperature Range -45 to +105 ºC Operating Humidity Range 5 to +95 (non-condensing) %
- 2. http://www.wallystech.com/ 2 Storage Humidity Range 0 to +90 (non-condensing) % Hardware Specifications Symbol Parameter CPU Qualcomm-Atheros IPQ6018 CPU Frequency Quad-core ARM 64 bit A53 @1.8 GHz processor System Memory 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Ethernet Port 5x 1Gbps Ethernet Ports , 1x 2.5Gbps Ethernet Port NGFF Slot M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0 SD Card Slot 1x SD Card Slot USB /header 1x USB 2.0 Port, 1x USB 3.0 Type-C Port POE 24V~48V passive POE DC Jack 12V power supply LED header FFC/FPC Connector Serial Port 1x Serial Port 12 Pin Connector Wireless On-board 2x2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain 4x U.FL Connectors Nor Flash 32MB Nand Flash 256MB DDR 256MB~512MB Dimension (W x H x D) 219mm x 150mm x 16.5mm (Without Heatsink)
- 3. http://www.wallystech.com/ 3 Radio TX Specifications(5180MHz-5825MHz) Operating Mode Data Rate Power Tolerance 1 Chain 2 Chains 5Ghz 802.11ax HE20 MCS0 20dBm 23dbm ±2dB MCS1 20dBm 23dBm ±2dB MCS2 20dBm 23dBm ±2dB MCS3 20dBm 23dBm ±2dB MCS4 19dBm 22dBm ±2dB MCS5 18dBm 21dBm ±2dB MCS6 17dBm 20dBm ±2dB MCS7 16dBm 19dBm ±2dB MCS8 15dBm 18dBm ±2dB MCS9 14dBm 17dBm ±2dB MCS10 13dBm 16dBm ±2dB MCS11 13dBm 16dbm ±2dB 5Ghz 802.11ax HE400 MCS0 20dBm 23dbm ±2dB MCS1 20dBm 23dBm ±2dB MCS2 20dBm 23dBm ±2dB MCS3 20dBm 23dBm ±2dB MCS4 19dBm 22dBm ±2dB MCS5 18dBm 21dBm ±2dB MCS6 17dBm 20dBm ±2dB MCS7 16dBm 19dBm ±2dB MCS8 15dBm 18dBm ±2dB MCS9 14dBm 17dBm ±2dB MCS10 13dBm 16dBm ±2dB MCS11 13dBm 16dbm ±2dB 5Ghz 802.11ax HE80 MCS0 20dBm 23dbm ±2dB MCS1 20dBm 23dBm ±2dB MCS2 20dBm 23dBm ±2dB MCS3 20dBm 23dBm ±2dB MCS4 19dBm 22dBm ±2dB MCS5 18dBm 21dBm ±2dB MCS6 17dBm 20dBm ±2dB MCS7 16dBm 19dBm ±2dB MCS8 15dBm 18dBm ±2dB MCS9 14dBm 17dBm ±2dB MCS10 13dBm 16dBm ±2dB
- 4. http://www.wallystech.com/ 4 MCS11 13dBm 16dbm ±2dB Radio TX Specifications(2412MHz-2482MHz) Operating Mode Data Rate Power Tolerance 1 Chain 2 Chains 2.4Ghz 802.11ax HE20 MCS0 23dbm 26dbm ±2dB MCS1 23dBm 26dBm ±2dB MCS2 23dBm 26dBm ±2dB MCS3 23dBm 26dBm ±2dB MCS4 23dBm 26dBm ±2dB MCS5 23dBm 26dBm ±2dB MCS6 23dBm 26dBm ±2dB MCS7 22dBm 25dBm ±2dB MCS8 21dBm 24dBm ±2dB MCS9 21dBm 24dBm ±2dB MCS10 18dBm 21dBm ±2dB MCS11 17dbm 20dbm ±2dB 2.4Ghz 802.11ax HE40 MCS0 23dbm 26dbm ±2dB MCS1 23dBm 26dBm ±2dB MCS2 23dBm 26dBm ±2dB MCS3 23dBm 26dBm ±2dB MCS4 23dBm 26dBm ±2dB MCS5 23dBm 26dBm ±2dB MCS6 23dBm 26dBm ±2dB MCS7 22dBm 25dBm ±2dB MCS8 21dBm 24dBm ±2dB MCS9 21dBm 24dBm ±2dB MCS10 21dBm 24dBm ±2dB MCS11 19dbm 22dbm ±2dB