This document summarizes the structural performance analysis of a Formula SAE race car chassis designed by engineering students. It describes:
1) How the chassis was modeled and analyzed using finite element analysis to study stress distributions and deformations under various static, dynamic, and frequency loads.
2) How load calculations were performed to estimate forces from acceleration, braking, and cornering. Loads from driver and components were also estimated.
3) Material selection for the chassis, with steel being chosen for its availability, cost, and mechanical properties like strength and stiffness.
4) Development process including modifying an existing 3D chassis model using CAD software while ensuring fit with an anthropometric driver model.
ANALYSIS OF SPACE FRAME OF FORMULA SAE AT HIGH SPEED WITH ERGONOMIC AND VIBRA...IAEME Publication
This paper introduces a design and analysis methodology of space frame chassis in the context of ending new and innovative design principle by means of optimization techniques. The design is according to the Formula SAE International rule book. Our paper emphasis on the driver safety, ergonomics of the driver according to the rule book in which we calculate the critical conditions of the race track, emphasis on the vehicle head on collision, rear impact test, torsional rigidity test, vibrational analysis of roll cage (space frame chassis) and side impact to make that chassis under the design limits and having the factor of safety 1-2.5 having a material of chromoly 4130 which is selected as an optimum material for design.
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
This document discusses CATIA software and its uses in design and manufacturing. It then describes the Baja SAE competition where students design, build, and race off-road vehicles. Finally, it outlines different types of vehicle chassis designs, materials used, and considerations for structural analysis and testing.
DESIGN & STRUCTURAL PERFORMANCE ANALYSIS OF SUPRA SAE CAR CHASSISPrashant Sahgal
This document summarizes the design and structural analysis of a racing car chassis. It describes using CATIA software to model the chassis and ANSYS for finite element analysis to simulate various loads on the chassis, including front impact, side impact, torsion, bumps, and rollovers. The analysis found maximum deformations between 1-5 mm and stresses below 300 MPa across the tests, with safety factors above 1.5 in all cases. The document concludes the finite element analysis provided valuable insights for designing a chassis that can withstand the forces of racing.
Chassis 2002 01-3300 design, analysis and testing of a formula sae car chassisELKINMAURICIOGONZALE
This document summarizes the design, analysis, and testing of a Formula SAE car chassis. It discusses key concepts in frame design including load paths, deformation modes, and stiffness targets. A spring model is developed to determine frame and chassis torsional stiffness targets relative to suspension components. Finite element analysis is used to analyze frame concepts. Experimental techniques like strain gauges and whole-car tests are used to validate designs and determine actual stiffness.
The document describes the structural optimization of an SAE Baja car frame through analysis of frontal, side, roll-over, torsional, and combined impacts. Frontal impact analysis was performed first due to its severity. The frame was loaded with a 33.33 kN force and optimized to minimize mass. Key members were found with stresses over 230 MPa and their inner and outer radii were parameterized for optimization. The optimized frontal design was then used for further analyses and optimizations of side impact, roll-over, modal frequencies, torsional loading, and a system integration study. Mass convergence and stress plots show the optimization process.
Finite Element Analysis for stress calculations and safetyHarshal Borole
The document discusses finite element analysis techniques for analyzing stresses on dump truck frames. It describes conducting static load analysis to determine stress concentrations, modal analysis to find natural frequencies and mode shapes, and dynamic analysis of the frame during unloading. Reinforcement techniques are analyzed to optimize stress by adding plates to high stress areas. The analysis found reinforcement decreased frame deformation by 4.7% and stresses by 31.42%, improving load capacity.
This document outlines the design, material testing, and construction of a composite chassis for Edith Cowan University's 2010 Formula SAE race car. Key points:
- An extensive material testing program was conducted to determine the optimal composite panel configuration for strength, stiffness, and safety.
- Various core thicknesses, skin materials, and fiber orientations were tested to evaluate their effects on the panel properties.
- The final design utilized a "cut and fold" construction with carbon fiber-skinned aluminum honeycomb panels, which provided high strength and stiffness relative to weight.
- The report details the panel testing process, attachment point design, and construction of the composite monocoque chassis.
ANALYSIS OF SPACE FRAME OF FORMULA SAE AT HIGH SPEED WITH ERGONOMIC AND VIBRA...IAEME Publication
This paper introduces a design and analysis methodology of space frame chassis in the context of ending new and innovative design principle by means of optimization techniques. The design is according to the Formula SAE International rule book. Our paper emphasis on the driver safety, ergonomics of the driver according to the rule book in which we calculate the critical conditions of the race track, emphasis on the vehicle head on collision, rear impact test, torsional rigidity test, vibrational analysis of roll cage (space frame chassis) and side impact to make that chassis under the design limits and having the factor of safety 1-2.5 having a material of chromoly 4130 which is selected as an optimum material for design.
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
This document discusses CATIA software and its uses in design and manufacturing. It then describes the Baja SAE competition where students design, build, and race off-road vehicles. Finally, it outlines different types of vehicle chassis designs, materials used, and considerations for structural analysis and testing.
DESIGN & STRUCTURAL PERFORMANCE ANALYSIS OF SUPRA SAE CAR CHASSISPrashant Sahgal
This document summarizes the design and structural analysis of a racing car chassis. It describes using CATIA software to model the chassis and ANSYS for finite element analysis to simulate various loads on the chassis, including front impact, side impact, torsion, bumps, and rollovers. The analysis found maximum deformations between 1-5 mm and stresses below 300 MPa across the tests, with safety factors above 1.5 in all cases. The document concludes the finite element analysis provided valuable insights for designing a chassis that can withstand the forces of racing.
Chassis 2002 01-3300 design, analysis and testing of a formula sae car chassisELKINMAURICIOGONZALE
This document summarizes the design, analysis, and testing of a Formula SAE car chassis. It discusses key concepts in frame design including load paths, deformation modes, and stiffness targets. A spring model is developed to determine frame and chassis torsional stiffness targets relative to suspension components. Finite element analysis is used to analyze frame concepts. Experimental techniques like strain gauges and whole-car tests are used to validate designs and determine actual stiffness.
The document describes the structural optimization of an SAE Baja car frame through analysis of frontal, side, roll-over, torsional, and combined impacts. Frontal impact analysis was performed first due to its severity. The frame was loaded with a 33.33 kN force and optimized to minimize mass. Key members were found with stresses over 230 MPa and their inner and outer radii were parameterized for optimization. The optimized frontal design was then used for further analyses and optimizations of side impact, roll-over, modal frequencies, torsional loading, and a system integration study. Mass convergence and stress plots show the optimization process.
Finite Element Analysis for stress calculations and safetyHarshal Borole
The document discusses finite element analysis techniques for analyzing stresses on dump truck frames. It describes conducting static load analysis to determine stress concentrations, modal analysis to find natural frequencies and mode shapes, and dynamic analysis of the frame during unloading. Reinforcement techniques are analyzed to optimize stress by adding plates to high stress areas. The analysis found reinforcement decreased frame deformation by 4.7% and stresses by 31.42%, improving load capacity.
This document outlines the design, material testing, and construction of a composite chassis for Edith Cowan University's 2010 Formula SAE race car. Key points:
- An extensive material testing program was conducted to determine the optimal composite panel configuration for strength, stiffness, and safety.
- Various core thicknesses, skin materials, and fiber orientations were tested to evaluate their effects on the panel properties.
- The final design utilized a "cut and fold" construction with carbon fiber-skinned aluminum honeycomb panels, which provided high strength and stiffness relative to weight.
- The report details the panel testing process, attachment point design, and construction of the composite monocoque chassis.
This document describes the design, testing, and construction of a composite chassis for a Formula SAE race car. Material testing was conducted to determine the optimal composite panel configuration that would meet strength and stiffness requirements. Various core thicknesses, skin thicknesses, and fiber orientations were tested. Based on the results, the chassis was constructed of carbon fiber-skinned aluminum honeycomb panels, cut and folded to form the desired shape. The process involved extensive testing and iteration to develop a lightweight yet rigid chassis that complied with competition regulations.
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
The document summarizes the design of an off-road vehicle created by University of Texas at San Antonio students for the 2015 Baja SAE competition. It describes the design of the front and rear suspension systems, drivetrain, controls including steering and braking, and the frame. Analysis was conducted using software tools to optimize various components for performance over rough terrain while maintaining structural integrity. The vehicle was designed with a focus on safety, manufacturability, durability and performance given engineering and economic constraints.
This document summarizes a study that analyzed the design of a heavy commercial vehicle chassis through material optimization. Finite element analysis was used to model and simulate a 25-tonne truck chassis made of steel, aluminum alloy, and carbon composite. The steel chassis weighed 392.3kg, had a maximum displacement of 105mm, and maximum stress of 172.5MPa. The aluminum alloy chassis weighed 138.1kg, had a maximum displacement of 101.3mm, and maximum stress of 148MPa. The carbon composite chassis weighed 84.4kg, had a maximum displacement of 101.4mm, and maximum stress of 162.3MPa. The study concluded that changing from steel to aluminum alloy reduced the weight
Detailed design report on design of upright and hubZubair Ahmed
The document describes the design process for an upright component in an automobile suspension system. It discusses 14 design parameters that were considered. Several design concepts and models were explored before settling on a final design (Design 4). The key points of the final design are that it is CNC milled from aluminum alloy 6351 T-6, weighs 760 grams, and addresses the weaknesses identified in previous designs. Loading scenarios analyzed include steering effort, braking forces, remote bump forces, and cornering forces. Finite element analysis was used to evaluate stresses and predict fatigue life under the different loading conditions.
Diseño, análisis y optimización de chasis de coches de carreras por su rendim...ELKINMAURICIOGONZALE
This document discusses the design, analysis, and optimization of racing car chassis for structural performance. It describes how a space frame chassis design was chosen and modeled in CATIA software. An analysis of the chassis design was performed using finite element analysis in ANSYS to evaluate stresses and deflections from front, rear, lateral and rollover impacts. SAE 1018 steel was selected as the material for its strength, availability, and weldability. The analysis found maximum von Mises stresses of 193.112 MPa and 272.391MPa from rear and front impacts respectively, which provide safety factors above 1.4. The design process and analysis aimed to achieve a rigid yet lightweight chassis for improved racing performance.
Stress Analysis of a heavy duty vehicle chassis by using FEADigitech Rathod
This document summarizes a seminar presentation on stress analysis of a heavy duty vehicle chassis using finite element analysis (FEA). The presentation covers the methodology used, which includes modeling the full-scale chassis in CATIA, applying a uniform load distribution in ANSYS, and analyzing stress distributions and deformations. The results show maximum von Mises stresses of 200.67 MPa and deformations of 8.15mm between frame members. Modifications to the cross-section dimensions and connections are suggested to reduce stresses and deformations at critical points and increase chassis life.
The document summarizes the 2015 SAE Baja frame designed by Jacob Gansert for the University of Tennessee-Martin Baja team. The frame was designed to maximize the team's chances of winning the competition based on objectives like speed, durability, mobility, ergonomics, cost, and serviceability. An iterative design process was used, beginning with choices of tubing material, dimensions, and CAD modeling to ensure driver safety requirements were met. Tradeoffs between objectives like strength, weight, cost, and manufacturability were considered throughout the design.
IRJET- Strength Evaluation of Tipper Chassis under Static and Dynamic Load Co...IRJET Journal
This document summarizes the modeling and analysis of a truck chassis under static and dynamic loading conditions. It describes the modeling of the chassis geometry in Pro-E and its finite element analysis in HyperMesh. The chassis was analyzed under different load cases representing uniform distributed loads and concentrated pivot loads. Material properties of steel and cast iron used for the chassis are provided. The load calculations for the chassis consider loads from the rear body weight, engine, transmission, fuel tank, and other components. The analysis aims to evaluate the stresses and strength of the chassis under various static and dynamic operating conditions.
A review on stress analysis and weight reduction of automobile chassiseSAT Journals
Abstract
Chassis is the term used to define the basic structure of the vehicle. It is also referred to as carrying unit as all the units including
body are mounted on it. There are various loads acting on the chassis like inertia loads, static loads, over loads, etc. also it has to
withstand the forces induced due to sudden braking and acceleration. In this paper a review has been made on the stress analysis
of chassis by finite element analysis software packages like ANSYS, HyperWorks, etc. Weight reduction is gaining importance as
the designers are trying to reduce the excess weight form the existing vehicle design. A review of the various techniques for weight
reduction for the chassis is presented.
Keywords: chassis, finite element analysis, weight reduction, ANSYS
The document describes the design of a Formula 1000 racing chassis. Formula 1000 is an amateur racing class that uses a 1000cc motorcycle engine. The chassis must be made of steel and weigh at least 1000 pounds. The document discusses the design of the team's steel tube space frame chassis, which uses Pratt & Town's lattice trusses. It provides cost estimates for materials and construction labor. Simulation testing analyzed stresses on the frame from rollovers and impacts from other cars at 60 mph. The simulations found maximum displacements of less than 7 inches, meeting requirements.
ASK Automotive is a leading manufacturer of friction products for two-wheelers in India founded in 1989. Over two decades, it has grown from a small manufacturer to a major supplier of brake assemblies, brake shoes, and other automotive parts to OEMs in India. The company aims to make its products the first choice of users. It manufactures brake shoes and other friction products through a process that includes melting aluminum alloy, die casting, trimming, lapping, inspection, and packaging. Quality is ensured through certifications and a JIT production system with zero PPM defects.
This document discusses modeling and analyzing the structural properties of car wheels made from steel and aluminum alloy A356.2 materials. It begins with introducing the background and motivation for analyzing car wheel design. The author then describes the methodology, which involves creating 3D models of the wheel geometries in CATIA and performing static, modal, and fatigue analyses in ANSYS to compare the mechanical behaviors of steel versus aluminum alloy wheels. The results show that aluminum alloy wheels experience less total deformation and stress than steel wheels and have a longer fatigue life. In conclusion, using aluminum alloy provides benefits like reduced weight and improved performance over steel in car wheel applications.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
The document summarizes the finite element analysis of a Formula SAE racing car chassis. It describes the design goals of high ground clearance, light weight, strength, and driver safety. Steel tubing was selected for the chassis material. A torsional analysis found the chassis has a torsional rigidity of 2561.26 N.m/Degree. Additional analyses included front and rear impact simulations and a modal analysis to ensure the chassis' natural frequencies do not match the engine's operating frequencies. Future work will focus on a monocoque carbon fiber chassis design.
Modeling, simulation and optimization analysis of steering knuckle component ...eSAT Publishing House
This document summarizes a study that modeled, simulated, and optimized the design of a steering knuckle component for a race car. Five initial CAD models of the steering knuckle were created and analyzed using finite element analysis to determine stresses, displacements, and weights. The best design was then optimized using shape optimization software to reduce weight while maintaining strength. The optimized design achieved a 45.8% reduction in mass while still meeting strength requirements.
Structural Analysis of Ladder Chassis Frame for Jeep Using Ansys IJMER
Automotive chassis frame is an important part of an automobile. The automotive chassis
frame is the structural backbone of any vehicle. The main function of chassis frame is to support the
body, different parts of an automobile and topayload placed upon it.The chassis frame has to withstand
the stresses developed as well as deformation occurs in it and to withstand the shock, twist vibration
and other stresses. Its principle function is to carry the maximum load for all designed operating
condition safelythat should be within a limit. On chassis, frame maximum shear stress and deflection
under maximum load are important criteria for design andanalysis. In these projects, we
havecalculated the von mises stress and shear stress for the chassis frame and the finite element
analysis has been donefor the validation on the chassis frame model of jeep. We have taken certain
material as Mild sheet steel, aluminium alloy and titanium alloy for the rectangular hollow box type to
design chassis frame of jeep.
Software used in this project, CATIA V5-[Product 1] for design purpose and ANSYS 14 is used for
analysis.
This document discusses alternative lightweight materials and manufacturing technologies for vehicle frontal bumper beams. Three composite materials - GMT, GMTex, and GMT-UD - were characterized and evaluated through testing for their potential use in bumper beams. Quasi-static tensile, compression, and impact tests were conducted to determine the materials' mechanical properties and impact performance. Finite element analysis was also used to simulate impact loading and compare the performance of the composite materials to existing steel solutions. The results indicate the composite materials, especially GMT-UD, could provide advantages over steel in energy absorption and weight reduction while maintaining sufficient strength and stiffness for the bumper beam application.
Design, Analysis and Optimization of Automobile Wheel HubKrishna Khandelwal
This document summarizes a student project analyzing wheel hub design. It discusses common wheel hub components and materials used, including aluminum 1060 alloy and AISI 1035 steel. Failure analysis found failures were typically due to lack of lubrication, overloading, or improper nut installation. Analysis of the materials found aluminum 1060 alloy to be better than AISI 1035 steel for wheel hubs with safety factors of 5.4 and 3.8, respectively. The designed wheel hub assembly in SOLIDWORKS was found to provide stability during wheel rotation.
The document discusses the design modification and analysis of a V6 engine mounting bracket. It begins by introducing the purpose and functions of an engine mounting bracket. It then discusses sources of engine vibrations and the objectives of modifying the existing bracket design. The existing and modified bracket designs, which includes adding ribs, are modeled using CAD software. Various analyses including structural, thermal, and modal are performed on the original and modified bracket designs using different materials like aluminum alloy, magnesium alloy, and aluminum silicon carbide. The results of the analyses show that the modified bracket design with aluminum silicon carbide material performs better in reducing deformation, stress, heat flux, and increasing natural frequencies.
08.2012 formula sae cbr250 turbo kit & engine dyno - senior design proj...Tobias Overdiek
This document summarizes the components and capabilities of Tobi's Designs water brake dynamometer test stand. It includes descriptions of the dynamometer's ability to measure and tune engines, its cooling system, fuel system, throttle control, data acquisition system, adjustable engine mounts, and workspace area. Specifications on airflow rates and pressure drops through different configurations are also provided. Details are given on modifying a Honda 600cc oil pump and adding a pressure regulator to accommodate higher oil demands from a turbocharged engine.
The document provides an overview of vehicle body engineering. It discusses the objectives and outcomes of the course, which are to impart knowledge about vehicle construction, aerodynamics, passenger car body design, and materials. It also outlines the key functions of vehicle systems like the body, chassis, powertrain, and climate control. Additionally, it examines important vehicle attributes such as cost, weight, safety, and noise vibration harshness. The importance of vehicle body design and the role of the vehicle body engineer are explored. Finally, vehicles can be generally classified based on factors like intended use, passenger capacity, manufacturer, fuel type, drive configuration, and number of wheels.
This document describes the design, testing, and construction of a composite chassis for a Formula SAE race car. Material testing was conducted to determine the optimal composite panel configuration that would meet strength and stiffness requirements. Various core thicknesses, skin thicknesses, and fiber orientations were tested. Based on the results, the chassis was constructed of carbon fiber-skinned aluminum honeycomb panels, cut and folded to form the desired shape. The process involved extensive testing and iteration to develop a lightweight yet rigid chassis that complied with competition regulations.
CADmantra Technologies Pvt. Ltd. is one of the best Cad training company in northern zone in India . which are provided many types of courses in cad field i.e AUTOCAD,SOLIDWORK,CATIA,CRE-O,Uniraphics-NX, CNC, REVIT, STAAD.Pro. And many courses
Contact: www.cadmantra.com
www.cadmantra.blogspot.com
www.cadmantra.wix.com
The document summarizes the design of an off-road vehicle created by University of Texas at San Antonio students for the 2015 Baja SAE competition. It describes the design of the front and rear suspension systems, drivetrain, controls including steering and braking, and the frame. Analysis was conducted using software tools to optimize various components for performance over rough terrain while maintaining structural integrity. The vehicle was designed with a focus on safety, manufacturability, durability and performance given engineering and economic constraints.
This document summarizes a study that analyzed the design of a heavy commercial vehicle chassis through material optimization. Finite element analysis was used to model and simulate a 25-tonne truck chassis made of steel, aluminum alloy, and carbon composite. The steel chassis weighed 392.3kg, had a maximum displacement of 105mm, and maximum stress of 172.5MPa. The aluminum alloy chassis weighed 138.1kg, had a maximum displacement of 101.3mm, and maximum stress of 148MPa. The carbon composite chassis weighed 84.4kg, had a maximum displacement of 101.4mm, and maximum stress of 162.3MPa. The study concluded that changing from steel to aluminum alloy reduced the weight
Detailed design report on design of upright and hubZubair Ahmed
The document describes the design process for an upright component in an automobile suspension system. It discusses 14 design parameters that were considered. Several design concepts and models were explored before settling on a final design (Design 4). The key points of the final design are that it is CNC milled from aluminum alloy 6351 T-6, weighs 760 grams, and addresses the weaknesses identified in previous designs. Loading scenarios analyzed include steering effort, braking forces, remote bump forces, and cornering forces. Finite element analysis was used to evaluate stresses and predict fatigue life under the different loading conditions.
Diseño, análisis y optimización de chasis de coches de carreras por su rendim...ELKINMAURICIOGONZALE
This document discusses the design, analysis, and optimization of racing car chassis for structural performance. It describes how a space frame chassis design was chosen and modeled in CATIA software. An analysis of the chassis design was performed using finite element analysis in ANSYS to evaluate stresses and deflections from front, rear, lateral and rollover impacts. SAE 1018 steel was selected as the material for its strength, availability, and weldability. The analysis found maximum von Mises stresses of 193.112 MPa and 272.391MPa from rear and front impacts respectively, which provide safety factors above 1.4. The design process and analysis aimed to achieve a rigid yet lightweight chassis for improved racing performance.
Stress Analysis of a heavy duty vehicle chassis by using FEADigitech Rathod
This document summarizes a seminar presentation on stress analysis of a heavy duty vehicle chassis using finite element analysis (FEA). The presentation covers the methodology used, which includes modeling the full-scale chassis in CATIA, applying a uniform load distribution in ANSYS, and analyzing stress distributions and deformations. The results show maximum von Mises stresses of 200.67 MPa and deformations of 8.15mm between frame members. Modifications to the cross-section dimensions and connections are suggested to reduce stresses and deformations at critical points and increase chassis life.
The document summarizes the 2015 SAE Baja frame designed by Jacob Gansert for the University of Tennessee-Martin Baja team. The frame was designed to maximize the team's chances of winning the competition based on objectives like speed, durability, mobility, ergonomics, cost, and serviceability. An iterative design process was used, beginning with choices of tubing material, dimensions, and CAD modeling to ensure driver safety requirements were met. Tradeoffs between objectives like strength, weight, cost, and manufacturability were considered throughout the design.
IRJET- Strength Evaluation of Tipper Chassis under Static and Dynamic Load Co...IRJET Journal
This document summarizes the modeling and analysis of a truck chassis under static and dynamic loading conditions. It describes the modeling of the chassis geometry in Pro-E and its finite element analysis in HyperMesh. The chassis was analyzed under different load cases representing uniform distributed loads and concentrated pivot loads. Material properties of steel and cast iron used for the chassis are provided. The load calculations for the chassis consider loads from the rear body weight, engine, transmission, fuel tank, and other components. The analysis aims to evaluate the stresses and strength of the chassis under various static and dynamic operating conditions.
A review on stress analysis and weight reduction of automobile chassiseSAT Journals
Abstract
Chassis is the term used to define the basic structure of the vehicle. It is also referred to as carrying unit as all the units including
body are mounted on it. There are various loads acting on the chassis like inertia loads, static loads, over loads, etc. also it has to
withstand the forces induced due to sudden braking and acceleration. In this paper a review has been made on the stress analysis
of chassis by finite element analysis software packages like ANSYS, HyperWorks, etc. Weight reduction is gaining importance as
the designers are trying to reduce the excess weight form the existing vehicle design. A review of the various techniques for weight
reduction for the chassis is presented.
Keywords: chassis, finite element analysis, weight reduction, ANSYS
The document describes the design of a Formula 1000 racing chassis. Formula 1000 is an amateur racing class that uses a 1000cc motorcycle engine. The chassis must be made of steel and weigh at least 1000 pounds. The document discusses the design of the team's steel tube space frame chassis, which uses Pratt & Town's lattice trusses. It provides cost estimates for materials and construction labor. Simulation testing analyzed stresses on the frame from rollovers and impacts from other cars at 60 mph. The simulations found maximum displacements of less than 7 inches, meeting requirements.
ASK Automotive is a leading manufacturer of friction products for two-wheelers in India founded in 1989. Over two decades, it has grown from a small manufacturer to a major supplier of brake assemblies, brake shoes, and other automotive parts to OEMs in India. The company aims to make its products the first choice of users. It manufactures brake shoes and other friction products through a process that includes melting aluminum alloy, die casting, trimming, lapping, inspection, and packaging. Quality is ensured through certifications and a JIT production system with zero PPM defects.
This document discusses modeling and analyzing the structural properties of car wheels made from steel and aluminum alloy A356.2 materials. It begins with introducing the background and motivation for analyzing car wheel design. The author then describes the methodology, which involves creating 3D models of the wheel geometries in CATIA and performing static, modal, and fatigue analyses in ANSYS to compare the mechanical behaviors of steel versus aluminum alloy wheels. The results show that aluminum alloy wheels experience less total deformation and stress than steel wheels and have a longer fatigue life. In conclusion, using aluminum alloy provides benefits like reduced weight and improved performance over steel in car wheel applications.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
The document summarizes the finite element analysis of a Formula SAE racing car chassis. It describes the design goals of high ground clearance, light weight, strength, and driver safety. Steel tubing was selected for the chassis material. A torsional analysis found the chassis has a torsional rigidity of 2561.26 N.m/Degree. Additional analyses included front and rear impact simulations and a modal analysis to ensure the chassis' natural frequencies do not match the engine's operating frequencies. Future work will focus on a monocoque carbon fiber chassis design.
Modeling, simulation and optimization analysis of steering knuckle component ...eSAT Publishing House
This document summarizes a study that modeled, simulated, and optimized the design of a steering knuckle component for a race car. Five initial CAD models of the steering knuckle were created and analyzed using finite element analysis to determine stresses, displacements, and weights. The best design was then optimized using shape optimization software to reduce weight while maintaining strength. The optimized design achieved a 45.8% reduction in mass while still meeting strength requirements.
Structural Analysis of Ladder Chassis Frame for Jeep Using Ansys IJMER
Automotive chassis frame is an important part of an automobile. The automotive chassis
frame is the structural backbone of any vehicle. The main function of chassis frame is to support the
body, different parts of an automobile and topayload placed upon it.The chassis frame has to withstand
the stresses developed as well as deformation occurs in it and to withstand the shock, twist vibration
and other stresses. Its principle function is to carry the maximum load for all designed operating
condition safelythat should be within a limit. On chassis, frame maximum shear stress and deflection
under maximum load are important criteria for design andanalysis. In these projects, we
havecalculated the von mises stress and shear stress for the chassis frame and the finite element
analysis has been donefor the validation on the chassis frame model of jeep. We have taken certain
material as Mild sheet steel, aluminium alloy and titanium alloy for the rectangular hollow box type to
design chassis frame of jeep.
Software used in this project, CATIA V5-[Product 1] for design purpose and ANSYS 14 is used for
analysis.
This document discusses alternative lightweight materials and manufacturing technologies for vehicle frontal bumper beams. Three composite materials - GMT, GMTex, and GMT-UD - were characterized and evaluated through testing for their potential use in bumper beams. Quasi-static tensile, compression, and impact tests were conducted to determine the materials' mechanical properties and impact performance. Finite element analysis was also used to simulate impact loading and compare the performance of the composite materials to existing steel solutions. The results indicate the composite materials, especially GMT-UD, could provide advantages over steel in energy absorption and weight reduction while maintaining sufficient strength and stiffness for the bumper beam application.
Design, Analysis and Optimization of Automobile Wheel HubKrishna Khandelwal
This document summarizes a student project analyzing wheel hub design. It discusses common wheel hub components and materials used, including aluminum 1060 alloy and AISI 1035 steel. Failure analysis found failures were typically due to lack of lubrication, overloading, or improper nut installation. Analysis of the materials found aluminum 1060 alloy to be better than AISI 1035 steel for wheel hubs with safety factors of 5.4 and 3.8, respectively. The designed wheel hub assembly in SOLIDWORKS was found to provide stability during wheel rotation.
The document discusses the design modification and analysis of a V6 engine mounting bracket. It begins by introducing the purpose and functions of an engine mounting bracket. It then discusses sources of engine vibrations and the objectives of modifying the existing bracket design. The existing and modified bracket designs, which includes adding ribs, are modeled using CAD software. Various analyses including structural, thermal, and modal are performed on the original and modified bracket designs using different materials like aluminum alloy, magnesium alloy, and aluminum silicon carbide. The results of the analyses show that the modified bracket design with aluminum silicon carbide material performs better in reducing deformation, stress, heat flux, and increasing natural frequencies.
08.2012 formula sae cbr250 turbo kit & engine dyno - senior design proj...Tobias Overdiek
This document summarizes the components and capabilities of Tobi's Designs water brake dynamometer test stand. It includes descriptions of the dynamometer's ability to measure and tune engines, its cooling system, fuel system, throttle control, data acquisition system, adjustable engine mounts, and workspace area. Specifications on airflow rates and pressure drops through different configurations are also provided. Details are given on modifying a Honda 600cc oil pump and adding a pressure regulator to accommodate higher oil demands from a turbocharged engine.
The document provides an overview of vehicle body engineering. It discusses the objectives and outcomes of the course, which are to impart knowledge about vehicle construction, aerodynamics, passenger car body design, and materials. It also outlines the key functions of vehicle systems like the body, chassis, powertrain, and climate control. Additionally, it examines important vehicle attributes such as cost, weight, safety, and noise vibration harshness. The importance of vehicle body design and the role of the vehicle body engineer are explored. Finally, vehicles can be generally classified based on factors like intended use, passenger capacity, manufacturer, fuel type, drive configuration, and number of wheels.
Industrial training at general motors by VIVEK NIRWALvivek nirwal
this ppt enclose all important details which i got to learn in during my industrial training with general motors.hope this will help you guys to get more exposure in automobile industry.it will mainly help you in knowing the necessary aspects in manufacturing of a car.General motors is among top 10 automobiles industries of world. so it was a great experience having training with such a high profile industry.
This document provides instructions for assembling a Formula SAE race car frame. It begins with an overview of required skills, safety warnings, and tools. Sections then guide the reader through frame preparation, assembly, and finishing steps. Key steps include using jigs and risers to accurately weld frame members into front, rear, and bottom sections. Upon completion, the frame is heat treated and cleaned before final assembly.
The document discusses various topics related to automotive sheet metal and body damage repair, including:
- The most common types of sheet metal and alloys used in automotive manufacturing.
- The different types of body damage such as simple bends, displaced areas, and rolled buckles.
- Techniques for classifying and analyzing direct, indirect, and work hardening types of damage.
- Properties of sheet metal like plasticity, work hardening, and elasticity that are important for repair.
- Methods for straightening damaged metal including using hammers, dollies, spoons, and air bladders.
The document outlines the design and manufacture of a custom Formula SAE engine, the ER-600-C1, built by Edith Cowan University. It was based on components from a Honda CBR-600RR motorcycle engine. The report documents the process of designing and manufacturing major engine components to replace the stock Honda engine previously used. It discusses the rationale for developing a custom engine, the regulations that guided its design, and reviews competitor engine choices.
Vehicle Body Engineering Car Body ConstructionRajat Seth
The document discusses the construction of car bodies, describing various sub-assemblies that make up the body shell. These include the underbody assembly, body side assembly, shroud and dash panel assembly, roof and back window panels, center pillar, rear bulkhead, front end work, front wings, door panel assembly, bonnet assembly and more. Each sub-assembly is constructed separately then welded together to form the complete car body shell structure.
This document discusses the design of vehicle chassis systems. It covers several key load cases including bending, torsion, combined bending and torsion, lateral loading, and longitudinal loading. It also discusses different chassis types such as ladder frames, cruciform frames, torque tube backbone frames, and integral structures. Analysis methods like the simple structural surfaces method are introduced for evaluating load distributions and stresses in vehicle chassis designs.
The document provides an overview of Body-in-White (BIW) in automobile manufacturing. It discusses:
1. What BIW refers to - the stage where the car body sheet metal is assembled but before other components are added.
2. The main purposes of body design including aesthetics, structure, ergonomics, safety, aerodynamics, and insulation.
3. The two main types of body structures - monocoque and frame mounted. It provides descriptions and diagrams of each.
This document provides information on potential sponsors for the Formula Manipal team for the 2014 season. It lists several potential in-kind sponsors that could provide parts and components, including Bosch India, MRF, Denso India Ltd, IPG Automotive, 3DPD, and Magod Laser. Financial sponsors that could provide monetary funding are also listed, such as Syndicate Bank, Mahindra, Sahara India, MakeMyTrip.com, and Larsen & Toubro. The document also suggests Autocar India as a potential media sponsor and Sahara Force India as a source of technical support. Locally based sponsors are proposed for a "Buy a CC" campaign to raise funds, including Hanuman Motors, Dr
This document provides an overview of vehicle body engineering, including:
1. It defines key terms related to vehicle body design such as chassis, body, suspension system, and power train.
2. It describes the basic requirements for automobile body design including strength, stiffness, providing adequate space, minimizing air drag, and protecting occupants from weather, corrosion, and accidents.
3. It discusses important considerations for vehicle body design like visibility, terminology, and methods to improve space requirements. Diagrams are included to illustrate factors that influence visibility and space.
STATIC STRUCTURAL ANALYSIS OF CHASSIS IN COMPLIANCE WITH INTERNATIONAL RULES ...IRJET Journal
This document discusses the static structural analysis of a prototype formula-style vehicle chassis to ensure strength and avoid failure. It begins with an abstract stating the objective is to design and analyze the car chassis to withstand loads without deformation. The introduction provides background on the importance of the chassis and goals of high performance and stiffness. The literature review summarizes past research on chassis types, materials selection, design optimization techniques, and finite element analysis (FEA). The methodology outlines the process, including driver safety considerations and load calculations. Designing and material selection sections discuss building the chassis according to FSAE rules and choosing AISI 4130 steel. Analysis is then performed through FEA software, including front impact, rear impact, side impact,
This document discusses the structural analysis of different cross-section designs and composite materials for an automotive chassis to reduce weight. The chassis of an existing heavy vehicle is modeled and analyzed using various polymer composite materials (carbon/epoxy and S-glass/epoxy) and cross-sections (C, I, box). Numerical analysis is performed and results are validated against analytical calculations. Analysis shows that a carbon/epoxy composite chassis with an I-cross section induces lower deformation and stress compared to other materials and designs, making it superior for withstanding high loads.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Design Modification for Weight Reduction and Structural Analysis of Automotiv...IRJET Journal
This document describes a structural analysis of an Eicher 11.10 automotive chassis frame to optimize its design for weight reduction. The researchers modeled the original 'C' section chassis frame in PRO-E software and performed finite element analysis in ANSYS. The analysis calculated stresses and deformations under an 8-ton load to identify areas for strengthening or lightening. The goal was to design a chassis frame that could withstand loads for 30,000 running hours while reducing weight.
Consequence of Reinforced Concrete Slab Subjected to Blast LoadIRJET Journal
This document describes a structural analysis of an Eicher 11.10 automotive chassis frame to optimize its design for weight reduction. The researchers modeled the original 'C' section chassis frame in PRO-E software and performed finite element analysis in ANSYS. The analysis calculated stresses and deformations under an 8-ton load to identify areas for strengthening or lightening. The goal was to design a chassis frame that can withstand loads for 30,000 running hours while reducing weight.
IRJET- Design and Analysis of Chassis for Solar Electric VehicleIRJET Journal
The document discusses the design and analysis of a chassis for a solar electric vehicle. It begins with an introduction to solar vehicles and then describes the challenges in developing an effective solar car chassis, namely maximizing strength while minimizing weight. It then outlines the various types of chassis frames that were considered for the vehicle, including ladder, backbone, and monocoque frames. The design process is discussed, including considerations for ergonomics, dimensions based on a standardized anthropometric model, and using triangulation to increase torsional stiffness. A CAD model was generated and an analysis was performed using ANSYS software to simulate front, side, rear impacts and torsion. The final designed chassis was optimized for increased stiffness and strength.
In this research work, suitable lightweight material is found for chassis frame by analyzing chassis with different
materials like structural steel, aluminum alloy and Epoxy E-Glass UD composite materials. The selected material should have the
sufficient strength to carry the load coming on to the chassis when it is supporting the vehicle. With reduction in the weight of the
chassis, reduces the overall weight of the vehicle, which leads to the reduction in fuel. Thus, the usage of lightweight materials in
manufacturing of chassis frame has the advantages. The materials used should help in reducing the weight of the vehicle while
maintaining the necessary strength for supporting the expected load acting on the frame under various operating conditions.
ANSYS finite element software is used to analyze the performance of the chassis with different materials. The 3D model of the
chassis frame is developed by SOLIDWORKS software and numerical analysis is carried out by ANSYS. The model of the ladder
frame is developed using generic specifications. The FEM analysis was done on chassis frame for its deformation and stresses by
applying maximum load. The von-misses stresses, strain and deformations of the chassis with structural steel, aluminum alloy and
composite materials are compared. Composite materials are observed to be better with less weight with similar performance. It is
found that composite (E-glass) is more preferable material for chassis frame.
High Cycle Fatigue Life Estimation of Automotive Chassis Under the Dynamic Lo...IRJET Journal
The document summarizes a study on estimating the high cycle fatigue life of an automotive chassis under dynamic loading conditions. It discusses how finite element analysis was used to analyze stresses and natural frequencies on a Mercedes-Benz Actros truck chassis model made of aluminum T6 and high-strength steel. Static structural analysis was performed by applying boundary conditions and maximum load. This allowed comparison of stresses, deformation, and safety factors to select the best material for further modal and harmonic analysis to evaluate vibration response and fatigue life.
The document summarizes the random vibration and transient bump analysis of an automotive heavy vehicle leveling frame. It describes the modeling, optimization, and structural analysis of the existing leveling frame to reduce its weight. The leveling frame of a TATA 715 vehicle is modeled in SOLIDWORKS and analyzed in ANSYS to validate the optimized design. Various loads acting on the frame are considered and the design is evaluated based on stresses and deformations. The results are studied to validate the weight-reduced leveling frame.
This document summarizes a study on optimizing the design of a car wheel rim through finite element analysis. A car rim model is created in CATIA and analyzed in ANSYS Workbench under different loading conditions and with three materials: aluminum alloy, magnesium alloy, and structural steel. The total deformation and directional deformation are compared for each material under individual and combined loading of pressure, nodal force, and rotational velocity. The results show that structural steel has the lowest deformation under pressure and nodal force loading, while magnesium alloy performs best under rotational loading and shows the lowest overall deformation when all loads are combined.
Development and validation of chassis mounted platform design for heavy vehic...Dr.Vikas Deulgaonkar
Hand calculations, finite element (FE) analysis and experimental validation of chassis mounted platform design for defence and commercial off-road vehicles have been attempted in this work. The work was commenced with the thorough study of platform configuration, loading pattern, platform mount location & configuration on the vehicle chassis and relevant vehicle characteristics. Calculation of section modulus, shear force and bending moment of various structural members under specified loading has been carried out before proceeding with the FE modeling and analysis of platform. FE model of the chassis mounted platform has been made using shell elements and the boundary conditions have been imposed based on the loading pattern with an assumption of rigid vehicle chassis. Static and gradient analyses of the platform have been carried out for full scale and reduced scale prototype FE models. Experimental strain measurement at critical locations under different static and gradient loads has been carried out for design validation of chassis mounted platform using the scaled prototype. Close correlation has been found between the experimental stress values and FE stress analysis results for static and gradient load conditions. From the entire load tests conducted, it is observed that the strain values in rear portion are less as compared with those in front and mid portions of the platform in-spite of the rear overhang provision.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Design of Chassis for Automated Road Cleaning VehicleIRJET Journal
The document discusses the design of a chassis for an automated road cleaning vehicle. It begins with an introduction to chassis design and factors to consider like material choice, strength, stiffness, and weight. It then discusses the specific design of the automated vehicle chassis, including dimensions and use of mild steel as the material for its cost-effectiveness. The chassis is designed to support the vehicle weight and loads while withstanding various stresses. The summary concludes the document analyzes using mild steel to make the chassis cost-effective while meeting the strength and rigidity needs.
Structural Analysis of Go-kart Chassis using different materials to find the ...IRJET Journal
This document summarizes a study that analyzed the structural performance of a go-kart chassis made from different materials under various impact conditions using finite element analysis. The chassis was designed in CAD software and then simulated in ANSYS for front, side, and rear impacts using four steel materials: AISI 1018, AISI 1026, AISI 4130, and AISI 1020. The simulations calculated stress levels and deformations. Results showed the factor of safety for each material and impact scenario, identifying designs that were safe or at risk of failure based on exceeding the material's yield strength. AISI 4130 generally had the highest factors of safety, suggesting it could best withstand the forces experienced during impacts
Simulation and Optimization of wheel Hub and Upright of Vehicle: A ReviewIOSRJMCE
This paper deals with various methodologies adopted by present researcher for analysis of wheel hub and upright assembly with main objective of analysis and optimization of the vehicle. This review will assist researchers working in the field of development of the structural design and mass reduction of vehicle through optimization methods conducted by FEA software viz. Cre0 1.0 and HyperWorks. The review includes key areas of researches as shape optimization, static load analysis and fatigue load analysis using FEA. This literature progressively discusses about the research methodology, softwares and the outcomes of the discussed researches and is intended to give the readers a brief variety of the researches carried out on the wheel hub and upright assembly
Design & Development of Formula Student ChassisIRJET Journal
The document describes the design process for a Formula Student chassis. It discusses how the team used Solidworks to design a spaceframe chassis with AISI 4130 steel tubes. Key steps included:
1. Defining suspension hardpoints and the vehicle envelope based on driver ergonomics and positioning components.
2. Using software to sketch tubes and ensure proper triangulation at nodes for structural rigidity.
3. Adding tertiary tubes and performing analysis in ANSYS to optimize stiffness.
Ergonomic testing with drivers ensured the optimal seating position for visibility and controls. Manufacturing jigs and fixtures were designed to aid in precise tube notching and welding of the chassis.
Design and Validation of a Light Vehicle Tubular Space Frame ChassisIRJET Journal
This document summarizes a research paper that designed and validated a light vehicle tubular space frame chassis using finite element analysis. Key points:
1. A SAE BAJA space frame was designed according to competition rules and material availability constraints. Analytical and numerical models were compared to validate design.
2. Beam elements were found to be most efficient for modeling frame members, while plate elements were used for an engine fixation plate.
3. A 3D model was created in SolidWorks and simulated under inertial, impact, and torsion loading scenarios to validate the frame's performance.
4. Results indicated the proposed frame can safely operate under expected road conditions, allowing the manufacturing process to proceed
This document describes the design and analysis of a truck chassis. The chassis was modeled in CAD software including AutoCAD and CATIA. Finite element analysis was then performed on the chassis model in ANSYS to evaluate stresses and deflections. The objectives were to study chassis principles, investigate potential problems, create 3D models, and suggest design improvements through FEA. The chassis was meshed and simulated under static and dynamic loading conditions to determine high stress areas and optimize the chassis design.
This document summarizes a study on analyzing the stress on a ladder chassis with different cross-sectional shapes. The study models an existing bus chassis with a C-shaped cross-section in CAD software and analyzes it using finite element analysis software. It then models and analyzes the chassis with I-shaped and rectangular box-shaped cross-sections. The analysis found that the rectangular box cross-section had the lowest stress of 127 N/mm^2 and deflection of 2.683 mm, indicating it is the strongest of the three cross-section designs analyzed. A literature review showed that further studies on variable chassis cross-section designs could provide additional strength and weight savings benefits.
Analysis and selection of body member sections, Body subframe and underfloor ...Yash Lad
This document discusses the selection, analysis, and design of body member sections, subframes, and underfloor structures for vehicle design. It covers various cross section shapes that can be used for body members, different types of subframe designs, and the key components that define an automobile platform for the underfloor structure. The document also summarizes several research papers on analyzing and optimizing vehicle chassis frames and structures through computational modeling and simulations.
Similar to 5)structural performance analysis of formula sae car (20)
This document provides information about Ess Pee Quality Products, a manufacturer and exporter of natural honey based in India. The company sources raw honey from apiaries in the Himalayas and processes it hygienically to produce honey with a rich taste and natural nutrients. Ess Pee Quality Products supplies honey domestically and internationally in various packaging types and sizes, including glass bottles, jars, barrels, and portion packs. The honey is described as 100% pure, organic, and high in nutritional value with a long shelf life.
This document provides information about Ess Pee Quality Products, a manufacturer and exporter of natural honey based in India. It offers organic honey that is sourced from apiaries in the Himalayas and processed under hygienic conditions. The honey comes in various packaging types and sizes, including glass bottles, jars, barrels, and PET bottles. It is described as 100% natural and organic with a rich taste and various health benefits. Ess Pee aims to satisfy customers with high quality honey and prompt delivery services.
The UTEP Mini Baja team is seeking sponsors to help fund their entry into the 2013 SAE Mini Baja competition in Bellingham, WA. The competition challenges engineering students to design, build, and test an off-road vehicle. The UTEP team's goal is to provide hands-on engineering experience for students. Sponsorship benefits include tax deductions, recognition on the team's vehicle, website and apparel. Various sponsorship levels are available from $100 up to $10,000, with increasing recognition benefits. The projected budget for the competition is $30,430. Sponsorship is crucial to keeping the UTEP Mini Baja program competitive.
B. tech.(mechanical engineering) part iii(semester v & vi)[batch 2011]Ankit Singh
The document outlines the scheme of papers and syllabus for the 6th semester of the mechanical engineering program. It includes courses on computer aided design, machining science, refrigeration and air conditioning, mechanical vibrations, and electives. The syllabus sections provided for machining science cover topics like machining with single-point and multi-point cutting tools, calculation of machining parameters, tool wear, jigs and fixtures, and modern machining methods. Guidelines are also given for paper setters regarding the structure and format of question papers.
This document is a share application form submitted to XYZ Pvt. Ltd. The applicant is applying for a specified number of shares of Rs. 10 each and has submitted the corresponding application money. The form provides details of the applicant such as name, father's name, occupation, PAN, and signature. It also includes details of nominees and depository account if the applicant wants dividends credited to their bank account.
Application form research internship_program_0Ankit Singh
This document is an application form for a research internship scholarship in France. It requests personal details, contact information, academic history, French language proficiency, references, and a statement of purpose from the applicant. The applicant must declare that they are in good health and agree to share their personal data and act as an ambassador for French higher education if awarded the scholarship.
Learn SQL from basic queries to Advance queriesmanishkhaire30
Dive into the world of data analysis with our comprehensive guide on mastering SQL! This presentation offers a practical approach to learning SQL, focusing on real-world applications and hands-on practice. Whether you're a beginner or looking to sharpen your skills, this guide provides the tools you need to extract, analyze, and interpret data effectively.
Key Highlights:
Foundations of SQL: Understand the basics of SQL, including data retrieval, filtering, and aggregation.
Advanced Queries: Learn to craft complex queries to uncover deep insights from your data.
Data Trends and Patterns: Discover how to identify and interpret trends and patterns in your datasets.
Practical Examples: Follow step-by-step examples to apply SQL techniques in real-world scenarios.
Actionable Insights: Gain the skills to derive actionable insights that drive informed decision-making.
Join us on this journey to enhance your data analysis capabilities and unlock the full potential of SQL. Perfect for data enthusiasts, analysts, and anyone eager to harness the power of data!
#DataAnalysis #SQL #LearningSQL #DataInsights #DataScience #Analytics
The Ipsos - AI - Monitor 2024 Report.pdfSocial Samosa
According to Ipsos AI Monitor's 2024 report, 65% Indians said that products and services using AI have profoundly changed their daily life in the past 3-5 years.
Codeless Generative AI Pipelines
(GenAI with Milvus)
https://ml.dssconf.pl/user.html#!/lecture/DSSML24-041a/rate
Discover the potential of real-time streaming in the context of GenAI as we delve into the intricacies of Apache NiFi and its capabilities. Learn how this tool can significantly simplify the data engineering workflow for GenAI applications, allowing you to focus on the creative aspects rather than the technical complexities. I will guide you through practical examples and use cases, showing the impact of automation on prompt building. From data ingestion to transformation and delivery, witness how Apache NiFi streamlines the entire pipeline, ensuring a smooth and hassle-free experience.
Timothy Spann
https://www.youtube.com/@FLaNK-Stack
https://medium.com/@tspann
https://www.datainmotion.dev/
milvus, unstructured data, vector database, zilliz, cloud, vectors, python, deep learning, generative ai, genai, nifi, kafka, flink, streaming, iot, edge
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"sameer shah
Embark on a captivating financial journey with 'Financial Odyssey,' our hackathon project. Delve deep into the past performance of two companies as we employ an array of financial statement analysis techniques. From ratio analysis to trend analysis, uncover insights crucial for informed decision-making in the dynamic world of finance."
Orchestrating the Future: Navigating Today's Data Workflow Challenges with Ai...Kaxil Naik
Navigating today's data landscape isn't just about managing workflows; it's about strategically propelling your business forward. Apache Airflow has stood out as the benchmark in this arena, driving data orchestration forward since its early days. As we dive into the complexities of our current data-rich environment, where the sheer volume of information and its timely, accurate processing are crucial for AI and ML applications, the role of Airflow has never been more critical.
In my journey as the Senior Engineering Director and a pivotal member of Apache Airflow's Project Management Committee (PMC), I've witnessed Airflow transform data handling, making agility and insight the norm in an ever-evolving digital space. At Astronomer, our collaboration with leading AI & ML teams worldwide has not only tested but also proven Airflow's mettle in delivering data reliably and efficiently—data that now powers not just insights but core business functions.
This session is a deep dive into the essence of Airflow's success. We'll trace its evolution from a budding project to the backbone of data orchestration it is today, constantly adapting to meet the next wave of data challenges, including those brought on by Generative AI. It's this forward-thinking adaptability that keeps Airflow at the forefront of innovation, ready for whatever comes next.
The ever-growing demands of AI and ML applications have ushered in an era where sophisticated data management isn't a luxury—it's a necessity. Airflow's innate flexibility and scalability are what makes it indispensable in managing the intricate workflows of today, especially those involving Large Language Models (LLMs).
This talk isn't just a rundown of Airflow's features; it's about harnessing these capabilities to turn your data workflows into a strategic asset. Together, we'll explore how Airflow remains at the cutting edge of data orchestration, ensuring your organization is not just keeping pace but setting the pace in a data-driven future.
Session in https://budapestdata.hu/2024/04/kaxil-naik-astronomer-io/ | https://dataml24.sessionize.com/session/667627
Build applications with generative AI on Google CloudMárton Kodok
We will explore Vertex AI - Model Garden powered experiences, we are going to learn more about the integration of these generative AI APIs. We are going to see in action what the Gemini family of generative models are for developers to build and deploy AI-driven applications. Vertex AI includes a suite of foundation models, these are referred to as the PaLM and Gemini family of generative ai models, and they come in different versions. We are going to cover how to use via API to: - execute prompts in text and chat - cover multimodal use cases with image prompts. - finetune and distill to improve knowledge domains - run function calls with foundation models to optimize them for specific tasks. At the end of the session, developers will understand how to innovate with generative AI and develop apps using the generative ai industry trends.
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...Aggregage
This webinar will explore cutting-edge, less familiar but powerful experimentation methodologies which address well-known limitations of standard A/B Testing. Designed for data and product leaders, this session aims to inspire the embrace of innovative approaches and provide insights into the frontiers of experimentation!
Beyond the Basics of A/B Tests: Highly Innovative Experimentation Tactics You...
5)structural performance analysis of formula sae car
1. Jurnal Mekanikal
December 2010, No. 31, 46 - 61
46
STRUCTURAL PERFORMANCE ANALYSIS OF FORMULA SAE CAR
Ravinder Pal Singh1
Department of Mechanical Engineering,
Chitkara Institute of Engineering and Technology,
Rajpura, Patiala, Punjab, India
ABSTRACT
Formula SAE competitions take place every year and challenge teams of engineering
students to design and build a small single-seater racing car. Among many other key
components, chassis is an indispensable structural backbone of an automobile especially
in a racing car. Good designs allow a light, stiff and extremely safe chassis to be
produced at a reasonable manufacturing cost. The work shown in this research paper
was taken from second international participation by Chitkara FSAE team. This paper
introduces several concepts of frame’s load distributions and consequent deformation
modes. Design model was prepared using anthropometric parameters of tallest driver
(95th
percentile male), SAE rules book and previous design knowledge. Static and
dynamic load distributions were calculated analytically followed by extensive study of
various boundary conditions to be applied during diverse FEA tests. Stress distributions,
lateral displacements during static, dynamic and frequency modes were analyzed and
found considerable factor of safety as required. Torsional rigidity was calculated to be
615.98 Nm/deg which was 2.46 times the torsional rigidity of older design (250 Nm/deg).
Weight of the chassis was measured to be approximately 32 kg which was 1.125 times
less than the previous chassis (36 kg). In nutshell, ratio of percentage increase in
torsional rigidity to percentage decrease in weight was calculated to be 13.15:1.
Keyword: Chassis, FEA, Stress, Displacement, Torsional rigidity.
1.0 INTRODUCTION
Formula SAE®
Series competitions challenge teams of university undergraduate and
graduate students to conceive, design, fabricate and compete with small, formula style,
autocross vehicles [1].The basis of the competition is that a fictitious company has
contracted a group of engineers to build a small formula car which can sell in the market.
Cars are expected to perform very high in acceleration, braking, handling, aesthetics,
ergonomics, manufacturing and maintenance etc. within minimum manufacturing cost
with no compromise on driver safety. Vehicle must accommodate drivers having statures
ranging from 5th
percentile female to 95th
percentile male. The car must also satisfy safety
requirements such as side impact protection and impact attenuator [1]. Finally the cars are
judged on the basis of performances during static and dynamic events including technical
inspection, business presentation, cost, design, endurance tests etc. This research paper is
casted from the work done for second international participation in FSAE competition by
Chitkara, India team which took place in USA in June 2010. Team had already
represented country in Australia in November 2008 and also adjudged as 2nd
overall
best team in SAE Chennai, India in December 2009. So on the basis of past experience
*
Corresponding author : ravinderpal.singh@chitkara.edu.in
2. Jurnal Mekanikal, December 2010
47
and knowledge, whole of the car was re-modeled and re-fabricated for international
participation in USA as per the SAE rules. This time reduction of chassis weight
minimally by 10% using new materials and efficient design was decided as one of the
main objective of car development. New materials were deemed to use to widen the
structure’s strength and re-modeled the design to inculcate more driver comfort, safety,
structure triangulation and reduced inertial properties etc. The work started from the
review of technical reports of several winning universities. Their main points regarding
materials, design and load estimations were noted and discussed. Along with it,
orthographic drawings, finite element analysis (FEA) reports of existing car’s chassis
were also brainstormed and reasons of high stresses and displacements were tried to
discover. Modes of load distribution and their deformation concepts were taken care of
from various reference books. Some of the concepts are also enunciated in this paper to
help other universities while preparing the design of their car.
2.0 CHASSIS LOADING
Frame is defined as a fabricated structural assembly that supports all functional vehicle
systems. This assembly may be a single welded structure, multiple welded structures or a
combination of composite and welded structures [1]. Depending upon application of loads
and their direction, chassis is deformed in respective manner briefed as follows [2]:
i. Longitudinal Torsion
ii. Vertical Bending
iii. Lateral Bending
iv. Horizontal Lozenging
2.1) Longitudinal Torsion
Figure 1: Longitudinal Torsion [3]
Application of equal and opposite forces act at a certain distance from an axis tends to
rotate the body about the same axis. Automobiles also experience torsion while moving
on road subjected to forces of different magnitudes acting on one or two oppositely
opposed corners of the cars as shown in Figure 1. The frame can be thought as a torsion
spring connecting the two ends where suspension loads act [2]. Torsional loading and
resultant momentary elastic or permanent plastic deformation and subsequent unwanted
deflections of suspension springs can affect the handling as well as performance of car.
The resistance to torsional deformation is called as stiffness and it is expressed in
Nm/degree in SI units. Torsional rigidity is a foremost and primary determinant of frame
performance of cars.
3. Jurnal Mekanikal, December 2010
48
2.2 Vertical Bending
Figure 2: Vertical Bending [3]
Weight of driver, engine, drive-train, radiator and shell etc. under an effect of
gravity produce sag in the frame as shown in Figure 2. Frame is assumed to act as simply
supported beam and four wheels as supports tend to produce reactions vertically upward
at the axles. Vertical dynamic forces due to acceleration/deceleration further increase the
vertical deflections, hence stresses in chassis.
2.3 Lateral Bending
Lateral bending deformation occurs mainly due to the centrifugal forces caused during
cornering and wind forces to some extent. Lateral forces act along the length of chassis
and is resisted by axles, tires and frame members viz. hoops, side impact members and
diagonal hoops etc as shown in Figure 3.
Figure 3: Lateral Bending [3]
2.4 Horizontal Lozenging
This deformation is caused by forward and backward forces applied at opposite wheels
[3]. These forces may be caused by vertical variations in the pavement or the reaction
from the road driving the car forward. These forces tend to distort the frame into a
parallelogram shape as shown in the Figure 4. The magnitude of these loads changes with
the operating mode of the car.
4. Jurnal Mekanikal, December 2010
49
Figure 4: Horizontal Lozenging [3]
It is generally thought that if torsional and vertical bending stiffness is
satisfactory, then the chassis structure is expected to perform well. But torsional stiffness
is given more weight-age as the total cornering traction is the function of lateral weight
transfers [2].
3.0 LOAD ESTIMATION
After literature review, it was brought in view that normally FSAE car parts are designed
to withstand 3.5 g bump, 1.5 g braking and 1.5 g lateral forces [4]. These loads have to be
considered individually and combined. Determination of magnitudes, types and center of
gravity (cg) of loads is obligatory for optimum frame structure which is likewise a
repetitive task. An understanding of different loads in respective directions is shown in
Figure 5 in reference to Formula cars.
Figure 5: Forces acting on a formula one car [7]
To estimate an individual and total load of various components and car as a
whole, a block diagram showing estimated position of components was created as shown
in Figure 6. This schematic diagram simplified the understanding of different loads and
their respective positions.
5. Jurnal Mekanikal, December 2010
50
Figure 6: Car side view with all parts
Table 1: Approximate masses of main components
To consider mass of other components also, estimated mass of 250 kg was
considered instead of 215 kg. This includes mass of wishbones (front and rear), petrol
tank as well as radiator etc. Different forces viz. cornering, acceleration forces were
computed from masses using Newton’s second law of motion.
4.0 MATERIAL SELECTION
After load approximation, next step was the selection of material to construct a chassis.
Availability is one of the factors which dominate the material selection process. Working
on this single aspect, list of different desirable and available materials was prepared. Steel
and aluminum alloys are always the choice of most of the teams. After reviewing
mechanical properties, availability, cost and other significant factors, following material
was selected.
Table 2: Mechanical Properties of Chassis Material
C.G Components Mass (kg)
1 Driver 80
2 Engine 70
3 Drive-train 20
4 Steering 10
5 Battery 03
6 Chassis
32 (Later calculated from
mass properties)
Total 215
STEEL GRADE: IS 3074
S.No. Properties Values
1 Young’s modulus 2e+011 N/m2
2 Poisson ratio 0.266
3 Density 7860 kg/m3
4 Yield Strength 3.73e+008 N/m2
6. Jurnal Mekanikal, December 2010
51
5.0 SOLID MODELLING
After load approximation and material selection, preparing CAD model of chassis was a
next step. Based on past design knowledge, anthropometric data of tallest driver was
taken and previous 3-D chassis model was modified. CATIA V5 software tool was used
for designing as well as Finite Element analyses (FEA). SAE rules were taken care of
while designing. Mankin was created in same software on the basis of anthropometric
data and checked it under different realistic conditions to suit chassis design. It was a two
way process as firstly creating model and checking clashes with mankin and vice versa
was a repetitive task. After much iteration, CAD model was proposed as shown in Figure
7.
Figure 7: 3D Chassis Structure
Whole of the chassis model was made up of round hollow cross section tubes of
IS 3074 steel throughout chassis. Tubes of two different sizes were used in the design.
Whole of the structure comprises of tube 1” (outer diameter) and 1.6 mm wall thickness
except main hoop and front hoop. Both (front and main) hoops are made up of 1” (Outer
diameter) and 2.5 mm wall thickness as shown in red color in Figure 7. Mass properties
showed the mass of chassis was to be 32 kg.
6.0 FINITE ELEMENT ANALYSIS (FEA)
Structure designing was followed by its testing and consequent validity. To determine the
stiffness of a proposed frame design before construction, finite element analysis could
serve the purpose. While the process of solving Finite Element problems is a science,
creating the models is quite an art [2].
Conventionally in FEA, the frame is subdivided into elements. Nodes are placed
where tubes of frame join. There are many types of elements possible for a structure and
every choice the analyst makes can affect the results. The number, orientation and size of
elements as well as loads and boundary conditions are all critical to obtain meaningful
values of chassis stiffness [2]. Beam elements are normally used to represent tubes. The
assumption made in using beam elements is that the welded tubes have stiffness in
bending and torsion [2]. If a truss or link elements were used, the assumption being made
would be that the connections do not offer substantial resistance to bending or torsion [2].
Another aspect of beam elements is the possibility of including transverse shearing
effects.
7. Jurnal Mekanikal, December 2010
52
While modeling the stiffness contribution from each part of the frame, method to
apply the loads and constrain the frame plays significant role for an accurate analysis.
Accurate analysis means to predict the stiffness of frame close to actual stiffness as the
frame operates in real conditions. The problem here has normally been how to constrain
and load a frame, so to receive multiple load inputs from a suspension, while it has been
separated from that suspension and many other such problems. For practical reasons, it is
recommended that the load on the chassis frame, including its own weight should be
applied at the joints (nodes) of structural members. These point loads were statistically
equivalent to the actual distributed load carried by the vehicle [5].
Another thing to consider while modeling the frame is how to represent an
engine. For the engine, the first step is to locate a node at each position where there is an
engine mount. These mounts then need to be connected to the frame by an element.
Engine was assumed to be very stiff relative to the car frame. Thus assuming an engine to
be infinitely rigid, it can be modeled by connecting each engine mount node to every
other engine mount node by a beam element of high stiffness.
One of the few things that could be done to reduce the number of elements was to
replace the engine model with a solid block of aluminum connected to the frame by the
engine mounts. As most of the parts of an engine are made up of aluminum alloy, so it
was assumed that an engine as a whole will behave in the similar manner as can be
behaved by a solid block of same material. This greatly reduced the complexity of the
meshed model and produced satisfactory results. Various elements used in the present
paper to mesh the different parts of chassis are shown in Table 3.
Table 3: Elements used for meshing
Applying static loads on model is comparatively easier than ascertaining a frequency
range at which frame needs to be tested. In idle conditions, the speed range of Honda
VFR engine which was used in this project is 12 to 14 revolutions per second. This
translates into excitation frequency range of 13-15 Hz. The excitation from transmission
is about 0-100 Hz. [6]. The main excitation is at low speeds, when the vehicle is in the
first gear. At higher gear or speed, the excitation to the chassis is much less [5]. The
natural frequency of the vehicle chassis should not coincide with the frequency range of
the axles because this can cause resonance which may give rise to high deflection and
stresses and poor ride comfort. Excitation from the road is the main disturbance to the
chassis when the vehicle travels along the road. In practice, the road excitation has typical
values varying from 0 to 100 Hz [5]. At high cruising speed, the excitation is about 9000
rpm or 150 Hz. Various boundary conditions and force/moments applied during various
FEA tests are enunciated in the Table 4
S. No. Element Purpose
1 Linear Tetrahedral Round hollow tubes of frame,
2 Linear Tetrahedral Engine and suspension mounts
8. Jurnal Mekanikal, December 2010
53
Table 4: Boundary conditions used during various tests
7.0) RESULTS AND DISCUSSION
7.1 Static Shear
In static shear, it is assumed that frame acts like a cantilever beam and its one end is made
fixed and other end is subjected to vertical downward force as shown in Figure 8. Shear
force and bending moment diagrams were drawn and maximum bending moment was
calculated analytically at the fixed end of frame. Blue color shows clamping and yellow
color shows vertically downward forces acting at the front bulkhead as shown in figure 8.
The rear suspension mounts were clamped in this case. Force of 1440 N was applied at
the bulkhead which is the sum of weight of impact attenuator, driver legs and steering
weight etc. Maximum bending moment of 2081 Nm calculated to act about the Y-axis.
Figure 8: Boundary conditions during static shear
S.
No.
Test Boundary condition Force Moments
1
Static Shear
Clamp- rear
suspension mounts Downward force at front
bulkhead
2
Static overall
bending
Clamp- front and rear
suspension mounts
Uniformly distributed
loading
3
Static
torsional
loading
Clamp- rear
suspension mounts
Clockwise Moment at
bulkhead side
4
Acceleration
Analysis
Clamp- front and rear
suspension mounts
Force applied towards
rear
5
Frequency
analysis
Clamp- front and rear
suspension mounts
Frequency range- 69.12
Hz to 204.79 Hz
Point Load
Clamp
9. Jurnal Mekanikal, December 2010
54
Figure 9: Von Misses stresses during static shearing
Results showed that maximum Von Misses stress was to be 1.17x108
N/m2
.
Maximum strain energy (Proof resilience) capability of 4.345 Joules was observed from
this analysis. Elements in red color show the maximum stress areas and corresponding
maximum stress is shown in red color in stress tree in the left of Figure 9.
7.2 Static Vertical Bending
Figure 10: Boundary conditions during static vertical bending
Both front and rear suspension mounts were clamped and vertically downward
point forces of 1550 N were applied equally in driver cabin, engine bay and drive-train
section as shown in Figure 10. Frame is assumed to be a fixed beam with both ends
clamped and subjected to point shear forces acting downward. Bending moment and
shear force diagrams were drawn and values were calculated analytically. Blue color
shows the clamping restraint and yellow color shows the point forces acting downward.
Clamp
Point Load
10. Jurnal Mekanikal, December 2010
55
Figure 11: Von Misses stresses during static vertical bending
Maximum bending moment of 4.482 Nm about Y-axis with maximum vertical
downward displacement of 0.369 mm was noted. Maximum Von Misses stress of
2.77x107
N/m2
was observed at one or two places shown in red color in Figure 11. Most
of the areas throughout chassis were observed to be subjected to minimum value of stress
as shown in stress distribution tree in Figure 11. Maximum deflection was observed in the
center of driver cabin floor and noted down its position to strengthen it. Strain energy of
0.087 J was noted.
7.3 Lateral Bending
Figure 12: Application of lateral forces acting on roll hoop in driver cabin
Clamping restraint was applied at both front and rear suspension mounts as in
previous cases. Lateral cornering point forces of 2325 N (Sum of engine and driver
forces) was applied on side impact bracings of driver cabin, engine mounts and drive-
train side braces. Yellow color arrows are depicted application of forces acting outwards.
Figure 13: Von Mises stresses during lateral bending
11. Jurnal Mekanikal, December 2010
56
Maximum principal stress of 1.48x107
N/m2
(Figure 13) was observed with
maximum translational displacement of 0.142 mm after post processing which are within
the permissible limit of stresses. Strain energy of 0.015 J was observed.
7.4 Static Torsional Loading
Figure 14: Boundary conditions during torsion test
Torsional rigidity test is one of the most important tests which validates/rejects
the chassis structure. In this case, chassis is assumed to act as a cantilever with one end
fixed and other end free and subjected to torque about its longitudinal axis as shown in
Figure 14. A chassis should be able to resist angular deformation and resultant shear
stresses. Again clamping is shown by the blue color and clockwise torque is shown in
yellow color. Clockwise moment 316 Nm about longitudinal X-axis was applied.
Figure 15: Von Misses stresses during torsion
Uniform stress of 5.02x107
N/m2
(Figure 15) was observed with maximum stress
of 01x108
N/m2
at few points as shown in red color. Maximum translational displacement
of 2.24 mm was noted in front bulkhead supports and lowers side impact members.
Almost all other areas were found to be safe with approximately no stress and
displacement. Strain energy of 2.303 J was observed from the results.
Clamp Torque
12. Jurnal Mekanikal, December 2010
57
7.5 Accelaration Test
Figure 16: Boundary conditions during acceleration test
Due to inertia effect, acceleration forces tend to act in opposite direction to the
motion of body. Forces due to acceleration were calculated considering masses of driver
(80 kg) and engine (70 kg) respectively. Engine acceleration of 6.61 m/s2
was taken from
the manual of Honda VFR engine to be used in this vehicle and calculated an acceleration
force using Newton second law of motion (F=m*a). Total acceleration force of 992.2 N
was applied on the structure in backward direction shown in thick yellow color arrows in
Figure 16. Load of 1550 N was applied throughout in driver cabin, engine bay and drive-
train section as to simulate realistic conditions.
Figure 17: Von Misses stresses during acceleration
Chassis experienced maximum bending moment of 171.4 Nm about Y-axis
(anticlockwise) at cross-sections shown in red color. Whole of the chassis was found to
be within permissible stress limit with maximum stress was observed to be 2.67x107
N/m2
as shown in red color in Figure 17. Strain energy of 0.102 J was given by the FEA results.
7.6 Frequency Test
Engine is a source of vibrations in any vehicle. Chassis as with any structure has an
infinite number of resonant frequencies [8]. A resonant frequency, also known as natural
frequency, is a preferred frequency of vibration and results when the inertial and stiffness
forces cancel. For each of the infinite natural frequencies of vibrations which exist, a
different shape that the chassis deform during vibration also exists [8]. The deformed
shape that chassis will vibrate is also known as modes of vibration [8]. So, frequency
Acceleration
Forces
Clamp
Point Load
13. Jurnal Mekanikal, December 2010
58
analysis is mandatory to check structural behavior during a set range of
frequencies. Indirect actuated suspension system was used at front and rear of the vehicle.
A component called as rocker used to transmit the forces and motion from the tires
through tie rods to springs of shock absorbers. The rocker was clamped and hinged with
the chassis. Hence chassis was clamped at both front and rear due to suspension
construction with no external load applied. Only structural mass was taken into account
for analysis as shown in Figure 18.
Figure 18: Boundary conditions during frequency test
Figure 19: Von Misses stresses and modal analysis during frequency test
Software checked the structure from 69 Hz to 205 Hz automatically. No stresses
were observed below 156.86 Hz and chassis was found to be safe (high factor of safety).
At frequency of 156.86 Hz, 5.53x1010
N/m2
(elements shown in red color in figure 19)
was observed to be more than the permissible stress of material (3.73e+008 N/m2
).
Maximum translational displacement of 562 mm was noted down at this frequency. Of
the infinite modes of vibration that exist on the frame structure, only the lowest
frequencies are of interest [8]. The lower modes of vibration maximize the kinetic energy
and maximize the strain energy, while the high modes act in an opposite manner [8]. This
means that the soft and stiff parts of chassis will be apparent in the low and high modes of
vibrations respectively. Therefore it is worth to note that at lower frequencies (below
156.86 Hz), no considerable stress was found and chassis was assumed to be safe with
considerable factor of safety. The most affected region was the main hoop and main hoop
bracings with maximum stress and displacement.
Clamp
14. Jurnal Mekanikal, December 2010
59
Table 5: Von Misses stresses and Factor of Safety
S. No.
Test Von Misses Stress (N/m2
)
FOS
1
Static Shear 1.17*108 3.18
2
Static overall bending 2.27*107 16.41
3
Lateral Bending 1.48*107 25.25
4
Static torsional loading 1*108 3.73
5
Acceleration test 2.67x107 13.97
6
Frequency analysis 5.53*1010
(156.86 Hz) 00
By dividing yield stress (3.73e+008 N/m2
) of chassis material with maximum
Von Misses stresses induced in frame, factor of safety was calculated as shown in table 5.
Considerable factor of safety was observed in all static (shear, bending and torsional test)
boundary conditions. Chassis was found to exhibit high factor of safety during dynamic
viz. acceleration test. Frame behavior was analyzed in frequency range of 69.12 to
204.793 Hz and observed maximum deformation (stress and deflection), more than the
yield stress of frame material at a frequency of 156.86 Hz. Below 156.86 Hz, chassis was
observed to be safe and experienced stress very small than the strength of material.
So, 156.86 Hz can be considered as threshold value for proposed chassis. Chassis was
found to have highest factor of safety in lateral bending (25.25) followed by static
bending (16.41) and dynamic acceleration test (13.97) respectively.
Factor of safety was noted to be 3.73 in torsional loading mode which represents
the stiff nature of frame. An ideal chassis is one that has high stiffness; with low weight
and cost. If there is considerable twisting, the chassis vibrates, complicating the system of
the vehicle and sacrificing the handling performance [8]. The chassis that flexes is more
susceptible to fatigue and subsequent failure, and “suspension compliance may be
increased or decreased by bending or twisting of the chassis [9]. Also if a chassis is well
designed to handle torsional loads, bending should not be an issue [9]. The torsional
rigidity can be calculated by finding the torque applied to the frame and dividing by the
angular deflection. The actual calculation is done as follows, with the figure 20 showing a
view looking from the front of the suspension bay.
K=R/Ө (1)
K= (F*L)/tan-1[(Δy1+Δy2)/2L] (2)
where K = Torsional Stiffness
T = Torque
Ө = Angular deformation
F = Shear Force
y1, y2= Translational displacement
15. Jurnal Mekanikal, December 2010
60
Figure 20: Front suspension bay testing loads
Force applied (F) = 1264 Nm
y1= y2 = 2.24 mm = 0.00224m
L= 0.250 m
K= (1264*0.250)/tan-1
[(0.00224+0.00224)/2*0.250] = 615.98 Nm/deg
Torsional rigidity of previous design was calculated to be 250 Nm/deg [11] which
was an indicator of moderate stiffness and hence needed to be improved following
changes in design and material. The torsional stiffness of present design was calculated to
be 615.98 Nm/deg as calculated above which shows significant increase in stiffness in
present model by 2.46 times than the older design. Deakin et al concluded that a Formula
SAE racer, which has a total suspension roll stiffness of 500–1500 Nm/degree, requires
chassis stiffness between 300 and 1000 Nm/degree to enable the handling to be tuned
[10]. Torsional rigidity of University of Southern Queensland (USQ) 2004 SAE car
experienced torsional rigidity of 214 Nm/degree and appeared to drive reasonably well,
apart from the under-steer and other minor construction matters [10]. Increase in chassis
stiffness in present work owes to good structural design having more triangulation and of
course higher yield strength of IS 3074.
8.0 CONCLUSIONS
The dominant characteristic of structural behavior viz. torsional rigidity increased by 2.46
times with an average value of 615.98 Nm/deg without compromising on weight. Weight
of chassis was observed to decrease by 11.11% with approximate value of 32 kg as
compared to weight of older chassis frame. Stress distributions were found to be even and
less than the yield strength of material (3.73e+008 N/m2
). Chassis was found to be safe
significantly in static (bending) and dynamic (acceleration) modes with stress values
noticeably less than the yield strength. Critical value of stress was found to be 5.53x1010
N/m2
at a frequency of 156.86 Hz. Although below this frequency, chassis was found to
be safe and exhibited almost no stress. Dynamometer testing of previous car at
approximate 9000 rpm with speed of 90 km/h, the maximum vibration frequency was
noted to be not more than 100 Hz. So, it was expected that vibration range under same
conditions will either remain same or decrease for the present design model. Hence
chassis was expected to perform well in motion also.
16. Jurnal Mekanikal, December 2010
61
REFERENCES
1. 2010 Formula SAE® Rules, SAE International, USA.
2. Riley, W.B., George, A.R., 2002. Design, Analysis and Testing of Formula SAE
Race Car Chassis, SAE paper 2002-01-3300, Motorsports Engineering
Conference and proceedings.
3. Horizontal Lozenging, Retrieved from http://rileydynamics.com/m-
eng%20web/sec2.htm. on 17 June, 2010 1:10:37 GMT.
4. Milliken, William F., Milliken, Douglas L., 1997. Race Car Vehicle Dynamics,
Society of Automotive Engineers.
5. Fui, T.H., Rahman, R.A., 2007. Statics and Dynamics Structural Analysis of a 4.5
Ton Structural Analysis, Jurnal Mekanikal, 24, 56-67.
6. Johansson, I., Edlund, S., 1993. Optimization of Vehicle Dynamics in Trucks by
Use of Full Vehicle FE-Models, Göteborg, Sweden, Department of Vehicle
Dynamics & Chassis Technology, Volvo Truck Corporation.
7. O’Neill, A.M., 2005. Chassis Design for SAE Racer, University of Southern
Queensland.
8. Ryan, A. 2008. Formula SAE Race Car Analysis: Simulation and Testing of the
Engine as a structural member, Retrieved from
http://www.fisita.com/students/congress/sc08papers/f2008sc005.pdf on 06 June,
2010 03:40:37 GMT.
9. William F., Miliken and Douglas L. 1995. Race Car Vehicle Dynamics, Society
of Automotive Engineers Inc., 673-667.
10. Deakin, A., Crolla, D., Ramirez, JP, and Hanley, R. 2004. The Effect of Chassis
Stiffening on Race Car Handling Balance, Racing Chassis and Suspension
Design, Society of Automotive Engineers, Warrendale, PA.
11. Singh, R.P. and Kaur, T., 2009. Designing and fabrication of formula SAE
vehicle (Chassis), National Conference on Innovative developments in
engineering applications, Bhai Gurdas Institute of Engineering and Technology,
Sangrur, Punjab, India, 265-271.