08.2012 formula sae cbr250 turbo kit & engine dyno - senior design project presentation
•Download as PPTX, PDF•
1 like•1,444 views
This document summarizes the components and capabilities of Tobi's Designs water brake dynamometer test stand. It includes descriptions of the dynamometer's ability to measure and tune engines, its cooling system, fuel system, throttle control, data acquisition system, adjustable engine mounts, and workspace area. Specifications on airflow rates and pressure drops through different configurations are also provided. Details are given on modifying a Honda 600cc oil pump and adding a pressure regulator to accommodate higher oil demands from a turbocharged engine.
Report
Share
Report
Share
Recommended
Discharge relation for small parshall flume in free
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Mechanical unit operations 19_09.pptx
This document discusses filtration and cake filtration principles. It begins by defining filtration and the mechanisms involved. It describes cake filters and how a filter cake forms on the filter medium. The key principles of cake filtration are that resistance increases over time as the cake builds up, requiring either decreasing flow rate or increasing pressure drop to maintain flow. The pressure drop comes from both the filter medium and the cake. Parameters like flow rate, pressure drop, and cake thickness are important to cake filtration.
pressure drop calculation in sieve plate distillation column
This document provides a multi-part assignment problem involving distillation column design and analysis. In part 1, the document summarizes the calculation of the number of theoretical plates and feed location for a binary distillation column separating benzene and toluene using the McCabe-Thiele method. The summary finds that the column requires 7 plates with the feed on plate 4. Part 2 involves using the Fenske equation to determine the minimum number of plates and minimum reflux ratio for a pentane-hexane separation. The summary states that the minimum number of plates is 4 and the minimum reflux ratio is 0.9024. Part 3 involves calculations to determine the allowable vapor velocity, column diameter, pressure drop per plate
Flow through orifice meter
brief introduction about orificemeter, its working and graphs are additional .must see for all fluid mechanics students.
Moss Express Spain tapones y capuchones
Catálogo de la gama de tapones y capuchones de Moss Express España. Se puede encontrar más información en la web http://www.mossexpress.es o llamando al teléfono 902 178 001.
Problem solving in fluid mechanics
The document provides information about a water pump system including a filter, valve, elbows, and pipe. It gives values for flow rate, pressure, pipe diameter and length, loss coefficients, and asks questions about:
1) Determining the filter's loss coefficient
2) Calculating the flow rate if the valve is fully open and the filter's coefficient is given
3) Calculating the percentage change in flow rate between the two scenarios
4) Drawing the total energy line and hydraulic grade line for the system.
Guided Wave Radar Level Meter.pdf
High-frequency microwave pulses issued by the guided wave radar propagate along detection components (steel cable or steel rod), met the media to be measured, since the dielectric constant of the mutation, cause reflections, a portion of the pulse energy is reflected back. Transmit pulse and the reflected pulse is proportional to the distance and the time interval measured media.
Fluid Mechanics in SI Units 2nd Edition hibbeler 2021.pdf
This document provides information about accessing the companion website for the textbook "Fluid Mechanics, Second Edition in SI Units" by R. C. Hibbeler, including:
- A one-time password to access video solutions on the companion website.
- Instructions for registering an account on the companion website using the provided access code.
- Contact information for instructors to obtain an access code for the companion website materials.
Recommended
Discharge relation for small parshall flume in free
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Mechanical unit operations 19_09.pptx
This document discusses filtration and cake filtration principles. It begins by defining filtration and the mechanisms involved. It describes cake filters and how a filter cake forms on the filter medium. The key principles of cake filtration are that resistance increases over time as the cake builds up, requiring either decreasing flow rate or increasing pressure drop to maintain flow. The pressure drop comes from both the filter medium and the cake. Parameters like flow rate, pressure drop, and cake thickness are important to cake filtration.
pressure drop calculation in sieve plate distillation column
This document provides a multi-part assignment problem involving distillation column design and analysis. In part 1, the document summarizes the calculation of the number of theoretical plates and feed location for a binary distillation column separating benzene and toluene using the McCabe-Thiele method. The summary finds that the column requires 7 plates with the feed on plate 4. Part 2 involves using the Fenske equation to determine the minimum number of plates and minimum reflux ratio for a pentane-hexane separation. The summary states that the minimum number of plates is 4 and the minimum reflux ratio is 0.9024. Part 3 involves calculations to determine the allowable vapor velocity, column diameter, pressure drop per plate
Flow through orifice meter
brief introduction about orificemeter, its working and graphs are additional .must see for all fluid mechanics students.
Moss Express Spain tapones y capuchones
Catálogo de la gama de tapones y capuchones de Moss Express España. Se puede encontrar más información en la web http://www.mossexpress.es o llamando al teléfono 902 178 001.
Problem solving in fluid mechanics
The document provides information about a water pump system including a filter, valve, elbows, and pipe. It gives values for flow rate, pressure, pipe diameter and length, loss coefficients, and asks questions about:
1) Determining the filter's loss coefficient
2) Calculating the flow rate if the valve is fully open and the filter's coefficient is given
3) Calculating the percentage change in flow rate between the two scenarios
4) Drawing the total energy line and hydraulic grade line for the system.
Guided Wave Radar Level Meter.pdf
High-frequency microwave pulses issued by the guided wave radar propagate along detection components (steel cable or steel rod), met the media to be measured, since the dielectric constant of the mutation, cause reflections, a portion of the pulse energy is reflected back. Transmit pulse and the reflected pulse is proportional to the distance and the time interval measured media.
Fluid Mechanics in SI Units 2nd Edition hibbeler 2021.pdf
This document provides information about accessing the companion website for the textbook "Fluid Mechanics, Second Edition in SI Units" by R. C. Hibbeler, including:
- A one-time password to access video solutions on the companion website.
- Instructions for registering an account on the companion website using the provided access code.
- Contact information for instructors to obtain an access code for the companion website materials.
2010 Energy Audit Presentation
The document proposes an energy savings initiative for various industrial applications. It discusses opportunities to save energy and money in motor-driven systems like fans, pumps, compressors, and conveyors by using variable frequency drives (VFDs) and premium efficient motors. Retrofitting these systems can reduce energy consumption by up to 30% while qualifying for utility rebates. A case study at Clemson University found their direct drive cooling tower solution with Baldor motor and VFD improved efficiency from 81.2% to 92.0% while lowering noise levels.
2010 Energy Presentation
Detailed presentation to understand how and where your business can reduce its energy dramatically, therefore $$$, from your motor driven systems.
2010 Energy Presentation
The document proposes an energy savings initiative for various industrial applications. It discusses opportunities to save energy and money in motor-driven systems like fans, pumps, compressors, and conveyors by using variable frequency drives (VFDs) and premium efficient motors. Retrofitting these systems can reduce energy consumption by up to 30% while qualifying for utility rebates. A case study at Clemson University found their direct drive cooling tower solution with Baldor motor and VFD improved efficiency from 81.2% to 92.0% while lowering noise levels.
eti_03_EngineTestingOverview.pdf
Engine testing is done to develop and validate engine performance before mass production. It involves comprehensive testing of engine parameters like power, torque, emissions, fuel consumption, and validation against regulatory standards. A variety of instrumentation is used to monitor engine speeds, air and fuel flow rates, temperatures, pressures and emissions during testing. Dynamometers provide load on the engine and measure its output power and torque. Test results are used to improve engine design and efficiency.
5086(6) js115 lc final
This document provides detailed specifications and dimensions for a tracked excavator. It includes information on the excavator's operating weight, engine power, hydraulic system, undercarriage, swing system, cab features, and bucket/attachment compatibility. Dimensional data is provided for the excavator body and various attachments in both metric and imperial units. Performance specs are given for digging reach, digging depth, dumping height, and tearout forces depending on attachment configuration.
Czero Engineering - Feb 2017
Czero is an engineering services company specializing in mechanical design and prototyping for early stage R&D projects. They have expertise in areas such as engines, hydraulics, and energy systems. Some of their recent projects include designing a natural gas generator system for a locomotive, CO2-based cleaning machines, and a subsea hydraulic pump assembly. Czero takes projects from concept through detailed design, analysis, prototyping, and testing using virtual engineering methods to provide quick iterations to clients.
Dynalec company profile
The Company manufactures and supplies Engine & Chassis Dynamometerswith all Accessories and undertakes turnkey projects for the complete set-up of Engine Test Facility which includes Acoustic Enclosures, Water Circulation System with Cooling Tower, Engine Flue Gas Extraction System, Air Handling System and fully automated Engine Test System with match-plates, engine mounting pallets/trolleys with auto docking and Computer controlled Engine Performance Monitor.
The Company provides Engine Test Facility for carrying out endurance testing of engines. Two numbers of engine test beds with EDA&CSS have been erected in a separate premises of about 4000 sq. ft. area in the factory premises.
Automatic pneumatic bumper synopsis
This document discusses the design of an automatic pneumatic bumper system for vehicles. It would use IR sensors to detect obstacles within 4 feet of the vehicle traveling over 40-50 km/hr. When an obstacle is detected, the control unit would activate the pneumatic bumper system to protect the vehicle and anything in front of it. The system aims to increase safety using intelligent electronic controls and pneumatic components. It consists of IR sensors, a control unit and pneumatic bumper activation components.
Cam-Less Engines
An introduction to the concept of Cam-Less engines which replaces the conventional Cam and follower assembly with Electro -Mechanical or Electro-Hydraulic actuators controlled by PDM and ECU for better control and improving efficiency of an I.C.Engine.A theoretically simple but practically complex kit of technology which although beneficiary has its limitations and comes with a huge development and production cost.For better insight search for the same on Youtube.
https://youtu.be/XrYt1JHNmh4
An interesting take on this.
Diesel Particulate Filters Control Systems
This document discusses diesel particulate filter systems from Rypos, Inc. for stationary diesel generators and port equipment. It provides an overview of regulatory requirements for particulate matter emissions in California, describes Rypos' active regeneration filter technology using electrical heating elements, and lists some customer installations of their diesel particulate filter systems on generators and rubber-tired gantries at various ports.
Submersible pumps
Grindex produces submersible heavy-duty pumps for demanding industries like construction, mining, and tunnels. Their pump line includes drainage pumps from 1.3 to 140 HP and sludge pumps. The document discusses features like built-in motor protection, wear resistance, and easy serviceability that reduce operational costs. It provides specifications for individual pump models ranging from the Minex to the Mega.
10 na brochure - flypartsguy.com - 10.2018
This document provides specifications for a 9.7L NA natural gas/propane engine from Weichai America Corp. The engine produces 118 kW at 1800 rpm using natural gas and 130 kW at 1800 rpm using propane. It has a cast iron block and cylinder heads, a one-piece forged crankshaft, and a gear-driven lubrication system. The document lists additional details on the engine cooling system, control system, air/exhaust systems, electrical system, flywheel, and dimensions. Performance curves show power and fuel consumption data at 1800 and 1500 rpm.
Bombas de Refrigeração Hermetic
Bombas de Refrigeração Hermetic
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
Project
Harish Kumar Shahi completed a summer internship at Axalta Coating Systems where he worked on three projects: optimization of extruders, analysis of product wheel sequencing, and development of a planning software tool. He analyzed the constraints and throughput of eight extruders, identifying issues like cooling problems. This led to an average 10% increase in throughput. He also analyzed moving from bucket to product wheel sequencing, finding potential inventory and cost savings. Finally, he developed a software tool to optimize production planning and inventory levels.
Dynamometer
The Sun RAM 3000 Chassis Dynamometer is available in 260 kW or 360 kW configurations for vehicle testing. It uses an eddy current brake and mobile PC platform to control comprehensive test programs. Tests include maximum power, constant speed, power curve, tachometer accuracy, and load simulation. Measurements of speed, temperature, RPM and other values are displayed. The dynamometer provides a controlled environment to evaluate vehicle performance and fuel efficiency.
NAFEMS Americas Elements presentation
Validation of a novel open source software suite against an extensive data set of automotive aerodynamics test cases
C175 16 data sheets epd0105-a
This document provides specifications for a 2825 ekW, 3531 kVA diesel generator set at 60 Hz and 1800 rpm with 480 Volt power output. It includes details on the prime power rated Cat C175-16 diesel engine, Cat Clean Emissions Module, Cat brushless generator, and EMCP 4.2 control panel. The generator set is EPA Tier 4 Interim compliant and has a radiator, fuel system, generator, mounting points, starting/charging system, and control panel described. Dimensions and performance data are provided.
Energy audit & conservation studies for industries
Informative presentation on methodology for carrying out Energy Audit & Energy Conservation Studies for Industries
Dc1370 a 294kw_scr
This document provides information on the SCANIA DC13 070A industrial engine. It lists the standard equipment which includes components like the Scania Engine Management System and a turbocharger. Optional equipment that can be added includes accessories like air cleaners, PTOs, and different flywheel options. Performance specifications are provided like power ratings across engine speeds and fuel consumption data. The engine is a 6-cylinder inline design displacing 12.7 liters. It uses SCR technology to reduce NOx emissions to meet emissions standards.
Dr. Hamoud 1.ppt
The document discusses hydraulics and pneumatics systems. It describes how these systems use fluids or compressed gases to transmit power through distribution lines to actuators, converting electrical or mechanical energy into fluid potential energy. Applications mentioned include vehicle steering/braking, spacecraft systems, industrial machinery, and more. Key components are identified as pumps/compressors, pressure regulators, valves, and actuators like cylinders. Pascal's law relating fluid pressure transmission is also summarized.
Tobias Overdiek - Resume Presentation 2016.v3
Tobias Overdiek's resume summarizes his experience as:
1) Chief engineer for the 2011 UTA Formula Hybrid race car that won "Best in Design", responsible for designing electric motors, gearboxes, and other systems.
2) Lead engineer for the UTA Formula SAE team from 2008-2009, developing the intake system and improving restrictor design.
3) Worked as a technical manager and engineer for a racing team from 2011-2015, designing organizational systems and providing engineering support.
Tobias Overdiek - Resume Presentation 2016.v2
Tobias Overdiek's resume summarizes his experience as:
1) Chief engineer for the 2011 UTA Formula Hybrid student race car team, where he designed electric motors and other systems, winning awards for his work.
2) Lead engineer for the UTA Formula SAE team from 2008-2009, where he designed engine components and won awards for CFD simulations.
3) Experience managing inventory systems for a racing team, helping them improve efficiency and win a championship.
More Related Content
Similar to 08.2012 formula sae cbr250 turbo kit & engine dyno - senior design project presentation
2010 Energy Audit Presentation
The document proposes an energy savings initiative for various industrial applications. It discusses opportunities to save energy and money in motor-driven systems like fans, pumps, compressors, and conveyors by using variable frequency drives (VFDs) and premium efficient motors. Retrofitting these systems can reduce energy consumption by up to 30% while qualifying for utility rebates. A case study at Clemson University found their direct drive cooling tower solution with Baldor motor and VFD improved efficiency from 81.2% to 92.0% while lowering noise levels.
2010 Energy Presentation
Detailed presentation to understand how and where your business can reduce its energy dramatically, therefore $$$, from your motor driven systems.
2010 Energy Presentation
The document proposes an energy savings initiative for various industrial applications. It discusses opportunities to save energy and money in motor-driven systems like fans, pumps, compressors, and conveyors by using variable frequency drives (VFDs) and premium efficient motors. Retrofitting these systems can reduce energy consumption by up to 30% while qualifying for utility rebates. A case study at Clemson University found their direct drive cooling tower solution with Baldor motor and VFD improved efficiency from 81.2% to 92.0% while lowering noise levels.
eti_03_EngineTestingOverview.pdf
Engine testing is done to develop and validate engine performance before mass production. It involves comprehensive testing of engine parameters like power, torque, emissions, fuel consumption, and validation against regulatory standards. A variety of instrumentation is used to monitor engine speeds, air and fuel flow rates, temperatures, pressures and emissions during testing. Dynamometers provide load on the engine and measure its output power and torque. Test results are used to improve engine design and efficiency.
5086(6) js115 lc final
This document provides detailed specifications and dimensions for a tracked excavator. It includes information on the excavator's operating weight, engine power, hydraulic system, undercarriage, swing system, cab features, and bucket/attachment compatibility. Dimensional data is provided for the excavator body and various attachments in both metric and imperial units. Performance specs are given for digging reach, digging depth, dumping height, and tearout forces depending on attachment configuration.
Czero Engineering - Feb 2017
Czero is an engineering services company specializing in mechanical design and prototyping for early stage R&D projects. They have expertise in areas such as engines, hydraulics, and energy systems. Some of their recent projects include designing a natural gas generator system for a locomotive, CO2-based cleaning machines, and a subsea hydraulic pump assembly. Czero takes projects from concept through detailed design, analysis, prototyping, and testing using virtual engineering methods to provide quick iterations to clients.
Dynalec company profile
The Company manufactures and supplies Engine & Chassis Dynamometerswith all Accessories and undertakes turnkey projects for the complete set-up of Engine Test Facility which includes Acoustic Enclosures, Water Circulation System with Cooling Tower, Engine Flue Gas Extraction System, Air Handling System and fully automated Engine Test System with match-plates, engine mounting pallets/trolleys with auto docking and Computer controlled Engine Performance Monitor.
The Company provides Engine Test Facility for carrying out endurance testing of engines. Two numbers of engine test beds with EDA&CSS have been erected in a separate premises of about 4000 sq. ft. area in the factory premises.
Automatic pneumatic bumper synopsis
This document discusses the design of an automatic pneumatic bumper system for vehicles. It would use IR sensors to detect obstacles within 4 feet of the vehicle traveling over 40-50 km/hr. When an obstacle is detected, the control unit would activate the pneumatic bumper system to protect the vehicle and anything in front of it. The system aims to increase safety using intelligent electronic controls and pneumatic components. It consists of IR sensors, a control unit and pneumatic bumper activation components.
Cam-Less Engines
An introduction to the concept of Cam-Less engines which replaces the conventional Cam and follower assembly with Electro -Mechanical or Electro-Hydraulic actuators controlled by PDM and ECU for better control and improving efficiency of an I.C.Engine.A theoretically simple but practically complex kit of technology which although beneficiary has its limitations and comes with a huge development and production cost.For better insight search for the same on Youtube.
https://youtu.be/XrYt1JHNmh4
An interesting take on this.
Diesel Particulate Filters Control Systems
This document discusses diesel particulate filter systems from Rypos, Inc. for stationary diesel generators and port equipment. It provides an overview of regulatory requirements for particulate matter emissions in California, describes Rypos' active regeneration filter technology using electrical heating elements, and lists some customer installations of their diesel particulate filter systems on generators and rubber-tired gantries at various ports.
Submersible pumps
Grindex produces submersible heavy-duty pumps for demanding industries like construction, mining, and tunnels. Their pump line includes drainage pumps from 1.3 to 140 HP and sludge pumps. The document discusses features like built-in motor protection, wear resistance, and easy serviceability that reduce operational costs. It provides specifications for individual pump models ranging from the Minex to the Mega.
10 na brochure - flypartsguy.com - 10.2018
This document provides specifications for a 9.7L NA natural gas/propane engine from Weichai America Corp. The engine produces 118 kW at 1800 rpm using natural gas and 130 kW at 1800 rpm using propane. It has a cast iron block and cylinder heads, a one-piece forged crankshaft, and a gear-driven lubrication system. The document lists additional details on the engine cooling system, control system, air/exhaust systems, electrical system, flywheel, and dimensions. Performance curves show power and fuel consumption data at 1800 and 1500 rpm.
Bombas de Refrigeração Hermetic
Bombas de Refrigeração Hermetic
SAIBA MAIS
Site: www.vibropac.com.br
Tel: +55 11 2108-5600
E-mail: vibropac@vibropac.com.br
Project
Harish Kumar Shahi completed a summer internship at Axalta Coating Systems where he worked on three projects: optimization of extruders, analysis of product wheel sequencing, and development of a planning software tool. He analyzed the constraints and throughput of eight extruders, identifying issues like cooling problems. This led to an average 10% increase in throughput. He also analyzed moving from bucket to product wheel sequencing, finding potential inventory and cost savings. Finally, he developed a software tool to optimize production planning and inventory levels.
Dynamometer
The Sun RAM 3000 Chassis Dynamometer is available in 260 kW or 360 kW configurations for vehicle testing. It uses an eddy current brake and mobile PC platform to control comprehensive test programs. Tests include maximum power, constant speed, power curve, tachometer accuracy, and load simulation. Measurements of speed, temperature, RPM and other values are displayed. The dynamometer provides a controlled environment to evaluate vehicle performance and fuel efficiency.
NAFEMS Americas Elements presentation
Validation of a novel open source software suite against an extensive data set of automotive aerodynamics test cases
C175 16 data sheets epd0105-a
This document provides specifications for a 2825 ekW, 3531 kVA diesel generator set at 60 Hz and 1800 rpm with 480 Volt power output. It includes details on the prime power rated Cat C175-16 diesel engine, Cat Clean Emissions Module, Cat brushless generator, and EMCP 4.2 control panel. The generator set is EPA Tier 4 Interim compliant and has a radiator, fuel system, generator, mounting points, starting/charging system, and control panel described. Dimensions and performance data are provided.
Energy audit & conservation studies for industries
Informative presentation on methodology for carrying out Energy Audit & Energy Conservation Studies for Industries
Dc1370 a 294kw_scr
This document provides information on the SCANIA DC13 070A industrial engine. It lists the standard equipment which includes components like the Scania Engine Management System and a turbocharger. Optional equipment that can be added includes accessories like air cleaners, PTOs, and different flywheel options. Performance specifications are provided like power ratings across engine speeds and fuel consumption data. The engine is a 6-cylinder inline design displacing 12.7 liters. It uses SCR technology to reduce NOx emissions to meet emissions standards.
Dr. Hamoud 1.ppt
The document discusses hydraulics and pneumatics systems. It describes how these systems use fluids or compressed gases to transmit power through distribution lines to actuators, converting electrical or mechanical energy into fluid potential energy. Applications mentioned include vehicle steering/braking, spacecraft systems, industrial machinery, and more. Key components are identified as pumps/compressors, pressure regulators, valves, and actuators like cylinders. Pascal's law relating fluid pressure transmission is also summarized.
Similar to 08.2012 formula sae cbr250 turbo kit & engine dyno - senior design project presentation (20)
Energy audit & conservation studies for industries
Energy audit & conservation studies for industries
More from Tobias Overdiek
Tobias Overdiek - Resume Presentation 2016.v3
Tobias Overdiek's resume summarizes his experience as:
1) Chief engineer for the 2011 UTA Formula Hybrid race car that won "Best in Design", responsible for designing electric motors, gearboxes, and other systems.
2) Lead engineer for the UTA Formula SAE team from 2008-2009, developing the intake system and improving restrictor design.
3) Worked as a technical manager and engineer for a racing team from 2011-2015, designing organizational systems and providing engineering support.
Tobias Overdiek - Resume Presentation 2016.v2
Tobias Overdiek's resume summarizes his experience as:
1) Chief engineer for the 2011 UTA Formula Hybrid student race car team, where he designed electric motors and other systems, winning awards for his work.
2) Lead engineer for the UTA Formula SAE team from 2008-2009, where he designed engine components and won awards for CFD simulations.
3) Experience managing inventory systems for a racing team, helping them improve efficiency and win a championship.
2.) tobias overdiek resume presentation of previous work & skills sets ...
Tobias Overdiek has extensive experience as the chief engineer for the 2011 winning UTA Formula Hybrid student race car where he designed electric in-wheel motors and led development of other vehicle systems. He also has a background in automotive repair and engine tuning as well as experience managing inventory systems for a racing team. The resume highlights Tobias' qualifications for engineering roles through his educational background and past work designing electric powertrains, conducting FEA analysis, and overseeing technical operations.
08.2010 fsae hybrid 3rd presentation gen-3 geared bldc motors, planetary tr...
The document discusses the design of geared front wheel motors for a hybrid race car. It aims to increase power-to-weight ratio and efficiency while reducing heat loss through the use of gears. The gear concept utilizes a planetary gear system to achieve high torque multiplication. Detailed analysis was performed on critical components like the sun gear teeth and hub to evaluate stresses and ensure safety factors above 2. Performance characteristics show the geared motors can generate more torque at the wheel compared to direct drive motors.
06.2010 fsae hybrid 2nd presentation gen-2 preliminary designs and hybrid c...
This document summarizes the preliminary design of a hybrid electric vehicle for a Formula SAE competition. It discusses the use of lithium-ion batteries and brushless DC motors to power the front wheels, with a gasoline engine and electric motor powering the rear axle. The control system would manage energy distribution between the power sources based on throttle input, battery charge level, and other factors. Cooling systems are proposed for the batteries and motors. Rules for the competition's hybrid class are also reviewed.
03.2010 fsae hybrid 1st presentation gen-1 geared motor, early concepts, &a...
This document discusses motor constant (Km) and its use in evaluating motor performance and efficiency. Km is a ratio that indicates a motor's ability to convert power to torque rather than heat. A higher Km value means a motor is more efficient. The document also evaluates several motor and gearbox design concepts for an electric vehicle. It finds that while geared systems can improve efficiency by allowing lower-torque operation, direct drive using large motors may be preferable due to simpler design and packaging compared to adding complexity of a gearbox.
More from Tobias Overdiek (6)
2.) tobias overdiek resume presentation of previous work & skills sets ...
2.) tobias overdiek resume presentation of previous work & skills sets ...
08.2010 fsae hybrid 3rd presentation gen-3 geared bldc motors, planetary tr...
08.2010 fsae hybrid 3rd presentation gen-3 geared bldc motors, planetary tr...
06.2010 fsae hybrid 2nd presentation gen-2 preliminary designs and hybrid c...
06.2010 fsae hybrid 2nd presentation gen-2 preliminary designs and hybrid c...
03.2010 fsae hybrid 1st presentation gen-1 geared motor, early concepts, &a...
03.2010 fsae hybrid 1st presentation gen-1 geared motor, early concepts, &a...
Recently uploaded
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Recently uploaded (20)
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
08.2012 formula sae cbr250 turbo kit & engine dyno - senior design project presentation
- 1. Tobi’s Designs- Short Edition The University of Texas at Arlington
- 6. -Dynamometers are useful in the development and refinement of modern day engine technology -Use of the “dyno” allows for measurement and tuning -Water Brake “dyno”
- 7. -Cooling System -Radiator -Fuel System -Tank -Pump -Regulator -Flow Meter -Throttle Control -Throttle -Data Acquisition -Battery -Shelf -Drive Axel Safety Bar
- 8. -Components contained within Test Stand -Fully Adjustable Rear Engine mount -Interchangeable Front Engine Mount -Accessible components -Top frame can be used as workspace -Equipped with Pneumatic Tires
- 20. Large amounts of separation 29 CFM
- 22. Outlet 1 2 3 4 Mach Mass Flow(kg/s) 0.3 0.05869 0.05860 0.05865 0.05863 CFM 0.3 110.74 110.50 110.65 110.47 Q (m^3/s) 0.3 0.05226 0.05215 0.05222 0.05213 Pressure Drop (Pa) 0.3 5844.2 5668.7 5754.4 5790.9 • Percent Difference Between the 4 Runners: • Orifice Constant = 2.6% • CFM = .22% • Pressure drop = 3.05%
- 23. Outlet Volume being used spans up to this point
- 24. Volume span being used
- 26. - Honda 600cc Engine Oil Pump - larger pump- gear rotors provide increased flow rate -custom CNC housing packaged to fit CBR250 crankcase - compensates for higher oil demand due to turbo lubrication and piston cooling oil jets
- 28. - - Pressure Regulator Oil Pan Return -addition turbo oiling circuit - pressure regulator governs flow rate and pressure - ideal turbo oil pressure 15-20 psi Oil Filter Oil Pump Oil Strainer Crankshaft Camshafts Pressure Relieve Valve