This document summarizes past research on energy management in mobile devices. It discusses how energy management is important for mobile devices due to limited battery size and longevity concerns. It also discusses the need for operating systems to provide energy isolation, delegation, and subdivision to allow applications to better manage energy usage. The document reviews several models for energy management in mobile devices and compares past research that has measured energy consumption of different components like wireless interfaces in smartphones. It identifies a need for further research to develop more accurate energy management techniques.
This document summarizes techniques for improving the energy efficiency of mobile devices in cloud environments. It discusses hardware approaches like improving processors and batteries as well as software approaches including energy-aware operating systems, applications that reduce resource requirements, and resource-aware computing. It also describes approaches that involve offloading computation and data storage to cloud resources to conserve local resources on mobile devices. In conclusion, it emphasizes that improving battery life is important for mobile devices and discusses how mobile cloud computing can help minimize battery consumption through the use of cloud services.
DESIGN OF INTELLIGENT DEVICE TO SAVE STANDBY POWER IN NETWORK ENABLED DEVICESIAEME Publication
This document proposes an Automatic Power Cut-Off and Reset Device (APCRD) to reduce standby power consumption in network-enabled devices. The APCRD would automatically cut power to appliances when they enter standby mode, completely eliminating standby power use. The document analyzes current and projected network device electricity consumption and savings potential from various efficiency approaches. It finds that the APCRD could achieve the highest energy, economic, and emissions savings compared to the Eco Design Directive or best available technologies by fully eliminating standby power in eligible devices.
Interoperability framework for data exchange between legacy and advanced mete...Alexander Decker
This document discusses interoperability between legacy metering infrastructure and advanced metering infrastructure (AMI). It proposes a solution that allows applications from different manufacturers to access standardized metered data. The solution also provides a way to access meter metadata without manually inputting address parameters, reducing development time for deploying AMI head-ends. The document analyzes challenges of integrating heterogeneous systems and standards like IEC 61850 that can help enable interoperability and data exchange between applications.
Interoperability framework for data exchange between legacy and advanced mete...Alexander Decker
This document discusses interoperability between legacy and advanced metering infrastructure (AMI). It proposes a solution that allows applications from different manufacturers to access standardized metered data. A novel approach is presented for accessing meter metadata without manually inputting address parameters, reducing development time for deploying AMI head-ends. The solution aims to make legacy infrastructure and AMI interoperable during the transition to fully advanced technology, allowing data exchange between heterogeneous systems from multiple vendors.
This document summarizes a study on the economic effects of technical and non-technical losses in Nigeria's power transmission system. The study found that Nigeria's 330kV transmission network suffers from high voltage drops and power losses of around 454.73 GW annually, costing over 4.4 billion naira. These losses are caused by technical issues like low generation capacity and a long, fragile network as well as non-technical issues like electricity theft. Reducing these transmission and distribution losses, which at 17.72% of output are very high compared to more efficient countries, could boost Nigeria's economic growth.
Role of communication schemes for power system operation andIAEME Publication
This document discusses communication schemes for power system operation and control. It covers:
1) The importance of communication in modern power systems for monitoring, protection and control across generation, transmission and distribution.
2) Various communication schemes used including power line carrier communication, fiber optic communication, satellite communication and cellular/mobile communication.
3) How communication enables automation through technologies like SCADA for integrated and flexible control of large, complex power systems.
This document provides an overview of smart grid technologies with a focus on communication technologies and standards. It discusses how the current power grid infrastructure is outdated and ill-suited for 21st century needs. The smart grid uses automated control, sensing technologies, and modern communications to address issues like reliability, efficiency, and renewable energy integration. Critical to the smart grid is a robust information and communication system to support real-time monitoring and control. The document examines various communication technologies that could support the smart grid and reviews ongoing standardization efforts.
IRJET- Power Line Carrier Communication (PLCC) Systems: A ReviewIRJET Journal
The document reviews power line carrier communication (PLCC) systems, which use existing power lines to transmit data communication signals. It discusses the benefits of PLCC such as using existing infrastructure and ubiquity. The document also summarizes several research papers on applications of PLCC including home automation, remote meter reading, and smart lighting control.
This document summarizes techniques for improving the energy efficiency of mobile devices in cloud environments. It discusses hardware approaches like improving processors and batteries as well as software approaches including energy-aware operating systems, applications that reduce resource requirements, and resource-aware computing. It also describes approaches that involve offloading computation and data storage to cloud resources to conserve local resources on mobile devices. In conclusion, it emphasizes that improving battery life is important for mobile devices and discusses how mobile cloud computing can help minimize battery consumption through the use of cloud services.
DESIGN OF INTELLIGENT DEVICE TO SAVE STANDBY POWER IN NETWORK ENABLED DEVICESIAEME Publication
This document proposes an Automatic Power Cut-Off and Reset Device (APCRD) to reduce standby power consumption in network-enabled devices. The APCRD would automatically cut power to appliances when they enter standby mode, completely eliminating standby power use. The document analyzes current and projected network device electricity consumption and savings potential from various efficiency approaches. It finds that the APCRD could achieve the highest energy, economic, and emissions savings compared to the Eco Design Directive or best available technologies by fully eliminating standby power in eligible devices.
Interoperability framework for data exchange between legacy and advanced mete...Alexander Decker
This document discusses interoperability between legacy metering infrastructure and advanced metering infrastructure (AMI). It proposes a solution that allows applications from different manufacturers to access standardized metered data. The solution also provides a way to access meter metadata without manually inputting address parameters, reducing development time for deploying AMI head-ends. The document analyzes challenges of integrating heterogeneous systems and standards like IEC 61850 that can help enable interoperability and data exchange between applications.
Interoperability framework for data exchange between legacy and advanced mete...Alexander Decker
This document discusses interoperability between legacy and advanced metering infrastructure (AMI). It proposes a solution that allows applications from different manufacturers to access standardized metered data. A novel approach is presented for accessing meter metadata without manually inputting address parameters, reducing development time for deploying AMI head-ends. The solution aims to make legacy infrastructure and AMI interoperable during the transition to fully advanced technology, allowing data exchange between heterogeneous systems from multiple vendors.
This document summarizes a study on the economic effects of technical and non-technical losses in Nigeria's power transmission system. The study found that Nigeria's 330kV transmission network suffers from high voltage drops and power losses of around 454.73 GW annually, costing over 4.4 billion naira. These losses are caused by technical issues like low generation capacity and a long, fragile network as well as non-technical issues like electricity theft. Reducing these transmission and distribution losses, which at 17.72% of output are very high compared to more efficient countries, could boost Nigeria's economic growth.
Role of communication schemes for power system operation andIAEME Publication
This document discusses communication schemes for power system operation and control. It covers:
1) The importance of communication in modern power systems for monitoring, protection and control across generation, transmission and distribution.
2) Various communication schemes used including power line carrier communication, fiber optic communication, satellite communication and cellular/mobile communication.
3) How communication enables automation through technologies like SCADA for integrated and flexible control of large, complex power systems.
This document provides an overview of smart grid technologies with a focus on communication technologies and standards. It discusses how the current power grid infrastructure is outdated and ill-suited for 21st century needs. The smart grid uses automated control, sensing technologies, and modern communications to address issues like reliability, efficiency, and renewable energy integration. Critical to the smart grid is a robust information and communication system to support real-time monitoring and control. The document examines various communication technologies that could support the smart grid and reviews ongoing standardization efforts.
IRJET- Power Line Carrier Communication (PLCC) Systems: A ReviewIRJET Journal
The document reviews power line carrier communication (PLCC) systems, which use existing power lines to transmit data communication signals. It discusses the benefits of PLCC such as using existing infrastructure and ubiquity. The document also summarizes several research papers on applications of PLCC including home automation, remote meter reading, and smart lighting control.
The integration of smart meters into electrical grids bangladesh chapterAlexander Decker
This document discusses the integration of smart meters into electrical grids in Bangladesh. It proposes a design for smart metering in Bangladesh that uses existing communication infrastructure like GSM networks and fiber optic lines set up by power utilities. Key parts of the proposed system include a home area network to enable two-way communication between utilities and consumers, and the use of power line carrier technology for wired communication within homes and wireless local area networks for additional connectivity. The system is intended to provide utilities with energy usage data from consumers and allow control of appliances without requiring new construction.
11.the integration of smart meters into electrical grids bangladesh chapterAlexander Decker
This document summarizes a journal article about integrating smart meters into electrical grids in Bangladesh. It discusses key aspects of smart metering technology including automated meter reading (AMR), automated metering infrastructure (AMI), and automated meter management (AMM). It proposes a design for Bangladesh that would use power line communication (PLC) and wireless technologies. It details the key components of smart meters including the metering unit, communication unit, and disconnect unit. It also discusses ensuring secure operation and implementing a variable tariff plan.
The document discusses broadband network development and ICT solutions in Chinese Taipei. It provides:
1) An overview of the government's goals to expand broadband coverage and Chunghwa Telecom's (CHT) efforts to support these goals through fiber optic and wireless networks.
2) Details on CHT's iEN services solution which uses ICT to manage building energy use and reduce carbon emissions.
3) Examples of ICT solutions CHT provides for smart transportation, healthcare, payments and other sectors to promote energy efficiency and a green economy.
This document discusses a pervasive computing approach for energy management in mobile devices. It proposes outsourcing computation from a mobile device to a remote server with an unlimited power source. The approach transforms a high-level source code into a client/server application, with the client on the mobile device and server on a surrogate machine. It uses methodologies from real-time systems to determine loop iterations and cost of outsourcing loops versus local computation. This allows generating code to intelligently decide whether to outsource or execute locally to optimize energy usage.
IRJET- Applications of Internet of Things in Human LifeIRJET Journal
This document discusses applications of the Internet of Things (IoT) in human life. It first provides background on IoT, defining it as a network of physical objects embedded with sensors that can communicate and share data. The document then reviews several applications of IoT, including smart grids, data analysis, agriculture, and healthcare. Specifically, it describes how IoT can be used to remotely monitor energy use and integrate renewable sources in smart grids, analyze sensor and social media data, automate irrigation and monitor farm conditions, and remotely track health metrics. The document concludes that while IoT brings many benefits, challenges around its applications need to be addressed.
IRJET- Applications of Internet of Things in Human LifeIRJET Journal
This document discusses applications of the Internet of Things (IoT) in human life. It begins with an introduction to IoT, defining it as a network of physical objects with sensors that can communicate and share data. It then reviews literature on IoT applications and challenges. Several applications are described in detail, including smart homes, healthcare, agriculture, and smart grids. The document concludes that while IoT has many applications in daily life, challenges associated with each application must be considered to ensure safety and security.
IRJET- A Smart Monitoring System for Hybrid Energy System using IoTIRJET Journal
This document describes a smart monitoring system for a hybrid energy system using IoT. The system uses solar and wind energy sources and can switch between them without inconvenience through an Android app and WiFi module. An ESP32 microcontroller module transmits and receives electrical data wirelessly from the app and monitors the system. Users can control the energy sources remotely through the app in a flexible and secure manner. The system provides an efficient, cheaper, and flexible way to control hybrid energy sources manually and remotely.
IRJET- Overloading Detection in Residentional AreaIRJET Journal
The document summarizes a proposed system for detecting overloading in residential areas. Current sensors measure incoming and outgoing current from an energy meter. If outgoing current is greater than incoming, overloading occurs. The currents are compared using Arduino programming. If overloading is detected, warning SMS are sent to the utility and consumer via GSM. The supply is then cut off by a relay. The system aims to prevent losses from transformer overloading due to electricity theft or excessive usage.
This document summarizes an article from the International Journal of Electrical Engineering and Technology that discusses modernizing traditional grids into smart grids through renewable energy sources. It provides background on the motivation to transition to smart grids, including addressing environmental concerns from fossil fuels and the inability of traditional grids to integrate renewable energy. The document outlines key features of smart grids, including reliability, flexibility, efficiency, sustainability, and enabling new energy markets. It also discusses challenges to smart grids, such as differences between energy generation and demand, transmitting power across grids, ensuring energy security, and developing standards to allow different technology components to work together.
This document summarizes a study on distributed energy resources (DER). It discusses how increased DER is changing power systems and potential reliability issues. DER provides alternatives to large central plants but can impact transmission systems. The document recommends:
1) Collecting and sharing DER location, type, and performance data across transmission and distribution systems to support modeling.
2) Modeling DER in bulk power system studies if significant impacts are expected based on location and output.
3) Avoiding netting of DER with load and instead aggregating or explicitly modeling DER based on penetration levels.
This document summarizes a research article about implementing smart grids in Iran. It discusses smart networks and their advantages, particularly in Iran. It also surveys smart meter implementation in Iran, addressing standardization, meter specifications, localization, and other implementation aspects. The article outlines Iran's goals for its AMI implementation project called FAHAM, including economic, social and environmental benefits. It then proposes a roadmap for smart metering implementation in Iran, including standardization, education, contractor support, defining equipment specifications, and localization of implementation methods.
This document discusses a study that examined students' perceptions of electricity use in electrical and
electronics workshops in Nigeria. It identifies various areas where electricity is needed, including lighting,
power tools, wiring, soldering, and testing equipment. However, Nigeria has unreliable public electricity
supply. As a result, workshops and businesses struggle to power equipment, hindering learning and skill
development. The study aims to investigate students' views on available electricity and its utilization across
different workshops. A questionnaire was administered to 106 students to collect data on their perceptions.
SMARTPHONE PREVENTIVE CUSTOMIZED POWER SAVING MODESijujournal
The postulate of this paper is that current smartphones' power saving modes can be improved towards
saving more power and/or gain more user satisfaction only if they start following “preventive” and/or user
customized power saving plans. We develop a number of preventive power saving modes that save the
battery power without the need of using the power of the same battery for detecting abusage. It will be
supporting the user with a preventive plan that could give him/her an idea about what to run or don’t run.
Another issue of current power saving modes is the “One Size Fits All” philosophy which does not take
into consideration the factors that could distinguish different smartphone users, for example, the nature of
the workspace of the user (Indoor/Outdoor), the age, the gender and/or the user’s applications categories
of interests. The paper develops a strategy to match a smartphone power saving mode with its perfect
smartphone user by classifying smartphones users into classes depending on a set of different factors and
having the user to identify himself/herself to the smartphone before the first use.
Monitoring and analysis of reliaibility of electrical distribution systemIAEME Publication
This document summarizes a study on monitoring and analyzing the reliability of electrical distribution systems using MATLAB. The study develops a reliability analysis program in MATLAB to assess factors that affect distribution reliability. Field visits were conducted to distribution substations in India to collect data. The objectives of the study are to provide reliability data to utility management, allow performance comparisons, determine how design and maintenance affect reliability, and aid maintenance scheduling. The significance of the study is that distribution reliability is important for utilities facing market pressures to satisfy customers while minimizing costs. The MATLAB model allows a new method for evaluating reliability and identifying cost-effective preventative maintenance strategies.
Distribution Automation - Emerging Trends and Challenges Providing an overview of challenges, further providing a detail by introducing IEC 61850 standard and finally concluding by discussing the need of a maker approach or workshops thus enabling better skills and development at institutions.
A Framework for Optimizing the Process of Energy Harvesting from Ambient RF S...IJECEIAES
Energy harvesting has been an active research topic in the past half a decade with respect to wireless networks. We reviewed some of the recent techniques towards improving energy harvesting performance to find that there is a large scope of improvement in terms of optimization and addressing problems pertaining to low-powered communicating mobile nodes. Therefore, we present a framework for identifying available RF sources of energy and constructing a robust link between the energy source and the mobile device. We apply linear optimization approach to enhance the performance of energy harvesting. Probabilility theory is used for identification of event loss in the presence of different number of nodes as well as node distances. The objective of the proposed system is to offer better availability of RF signals as well as better probability of energy harvesting for mobile devices. The proposed technique is also found to be computationally cost effective.
IRJET - Energy Efficient Approach for Data Aggregation in IoTIRJET Journal
This document summarizes a research paper on developing an energy efficient approach for data aggregation in IoT networks. The paper proposes using cache nodes between cluster heads and the base station to reduce energy consumption. It analyzes that the proposed technique of deploying cache nodes performs better than the existing LEACH protocol in terms of packet loss, throughput and energy consumption. The simulation results show that the proposed approach lowers packet loss and energy usage compared to directly transmitting data from cluster heads to the base station.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
This document summarizes an article from the International Journal of Electronics and Communication Engineering & Technology. The article describes modeling and simulating test data compression using Verilog. It discusses using efficient bitmask selection and dictionary selection techniques to significantly reduce testing time and memory requirements for system-on-chip designs. The techniques aim to generate maximum matching patterns for test data compression by developing a bitmask selection method and efficient dictionary selection method that considers bitmasks.
This document describes a data acquisition system and wireless telemetry system for unmanned aerial vehicles participating in the Advanced class of the SAE Aero Design competition. The system uses a laser altimeter and GPS module to measure altitude and location, which are sent via an Arduino microcontroller and XBee modules to a base station laptop. The laptop displays the measurements and has a button to trigger cargo release based on the vehicle's position and trajectory calculations. The system was designed to meet the competition's requirements of long range, low power, accurate measurements, and small size for recording altitude and assisting precise cargo deployment from UAVs.
This document summarizes an article from the International Journal of Civil Engineering and Technology that examines optimizing cropping patterns in an irrigation project area. It begins with background on the journal and outlines the objectives of determining optimal cropping patterns given land and water availability. It then reviews previous related studies and describes the study area which is the Mayurakshi Command Area in India. Key concepts are introduced, such as dividing the area into blocks based on agronomic, economic, climatic and rainfall factors. The problem is formulated with the objective of maximizing net return defined as revenue from crop sales minus expenses. Equations are provided to calculate net return per unit area for each crop, soil class, and block based on yield, prices
The document summarizes an experimental investigation into the performance and emissions of a diesel engine fueled with preheated corn oil methyl ester (COME) biodiesel at different temperatures. COME was produced via transesterification of corn oil with methanol. The engine was tested using diesel and blends of preheated COME at 50°C, 70°C, and 90°C. Brake thermal efficiency increased and BSFC decreased with COME preheated to 70°C due to improved combustion from reduced viscosity. Exhaust emissions of CO and HC decreased but NOx increased with COME. Performance generally decreased as the COME percentage in blends rose. Preheating COME to 70°C allowed
The integration of smart meters into electrical grids bangladesh chapterAlexander Decker
This document discusses the integration of smart meters into electrical grids in Bangladesh. It proposes a design for smart metering in Bangladesh that uses existing communication infrastructure like GSM networks and fiber optic lines set up by power utilities. Key parts of the proposed system include a home area network to enable two-way communication between utilities and consumers, and the use of power line carrier technology for wired communication within homes and wireless local area networks for additional connectivity. The system is intended to provide utilities with energy usage data from consumers and allow control of appliances without requiring new construction.
11.the integration of smart meters into electrical grids bangladesh chapterAlexander Decker
This document summarizes a journal article about integrating smart meters into electrical grids in Bangladesh. It discusses key aspects of smart metering technology including automated meter reading (AMR), automated metering infrastructure (AMI), and automated meter management (AMM). It proposes a design for Bangladesh that would use power line communication (PLC) and wireless technologies. It details the key components of smart meters including the metering unit, communication unit, and disconnect unit. It also discusses ensuring secure operation and implementing a variable tariff plan.
The document discusses broadband network development and ICT solutions in Chinese Taipei. It provides:
1) An overview of the government's goals to expand broadband coverage and Chunghwa Telecom's (CHT) efforts to support these goals through fiber optic and wireless networks.
2) Details on CHT's iEN services solution which uses ICT to manage building energy use and reduce carbon emissions.
3) Examples of ICT solutions CHT provides for smart transportation, healthcare, payments and other sectors to promote energy efficiency and a green economy.
This document discusses a pervasive computing approach for energy management in mobile devices. It proposes outsourcing computation from a mobile device to a remote server with an unlimited power source. The approach transforms a high-level source code into a client/server application, with the client on the mobile device and server on a surrogate machine. It uses methodologies from real-time systems to determine loop iterations and cost of outsourcing loops versus local computation. This allows generating code to intelligently decide whether to outsource or execute locally to optimize energy usage.
IRJET- Applications of Internet of Things in Human LifeIRJET Journal
This document discusses applications of the Internet of Things (IoT) in human life. It first provides background on IoT, defining it as a network of physical objects embedded with sensors that can communicate and share data. The document then reviews several applications of IoT, including smart grids, data analysis, agriculture, and healthcare. Specifically, it describes how IoT can be used to remotely monitor energy use and integrate renewable sources in smart grids, analyze sensor and social media data, automate irrigation and monitor farm conditions, and remotely track health metrics. The document concludes that while IoT brings many benefits, challenges around its applications need to be addressed.
IRJET- Applications of Internet of Things in Human LifeIRJET Journal
This document discusses applications of the Internet of Things (IoT) in human life. It begins with an introduction to IoT, defining it as a network of physical objects with sensors that can communicate and share data. It then reviews literature on IoT applications and challenges. Several applications are described in detail, including smart homes, healthcare, agriculture, and smart grids. The document concludes that while IoT has many applications in daily life, challenges associated with each application must be considered to ensure safety and security.
IRJET- A Smart Monitoring System for Hybrid Energy System using IoTIRJET Journal
This document describes a smart monitoring system for a hybrid energy system using IoT. The system uses solar and wind energy sources and can switch between them without inconvenience through an Android app and WiFi module. An ESP32 microcontroller module transmits and receives electrical data wirelessly from the app and monitors the system. Users can control the energy sources remotely through the app in a flexible and secure manner. The system provides an efficient, cheaper, and flexible way to control hybrid energy sources manually and remotely.
IRJET- Overloading Detection in Residentional AreaIRJET Journal
The document summarizes a proposed system for detecting overloading in residential areas. Current sensors measure incoming and outgoing current from an energy meter. If outgoing current is greater than incoming, overloading occurs. The currents are compared using Arduino programming. If overloading is detected, warning SMS are sent to the utility and consumer via GSM. The supply is then cut off by a relay. The system aims to prevent losses from transformer overloading due to electricity theft or excessive usage.
This document summarizes an article from the International Journal of Electrical Engineering and Technology that discusses modernizing traditional grids into smart grids through renewable energy sources. It provides background on the motivation to transition to smart grids, including addressing environmental concerns from fossil fuels and the inability of traditional grids to integrate renewable energy. The document outlines key features of smart grids, including reliability, flexibility, efficiency, sustainability, and enabling new energy markets. It also discusses challenges to smart grids, such as differences between energy generation and demand, transmitting power across grids, ensuring energy security, and developing standards to allow different technology components to work together.
This document summarizes a study on distributed energy resources (DER). It discusses how increased DER is changing power systems and potential reliability issues. DER provides alternatives to large central plants but can impact transmission systems. The document recommends:
1) Collecting and sharing DER location, type, and performance data across transmission and distribution systems to support modeling.
2) Modeling DER in bulk power system studies if significant impacts are expected based on location and output.
3) Avoiding netting of DER with load and instead aggregating or explicitly modeling DER based on penetration levels.
This document summarizes a research article about implementing smart grids in Iran. It discusses smart networks and their advantages, particularly in Iran. It also surveys smart meter implementation in Iran, addressing standardization, meter specifications, localization, and other implementation aspects. The article outlines Iran's goals for its AMI implementation project called FAHAM, including economic, social and environmental benefits. It then proposes a roadmap for smart metering implementation in Iran, including standardization, education, contractor support, defining equipment specifications, and localization of implementation methods.
This document discusses a study that examined students' perceptions of electricity use in electrical and
electronics workshops in Nigeria. It identifies various areas where electricity is needed, including lighting,
power tools, wiring, soldering, and testing equipment. However, Nigeria has unreliable public electricity
supply. As a result, workshops and businesses struggle to power equipment, hindering learning and skill
development. The study aims to investigate students' views on available electricity and its utilization across
different workshops. A questionnaire was administered to 106 students to collect data on their perceptions.
SMARTPHONE PREVENTIVE CUSTOMIZED POWER SAVING MODESijujournal
The postulate of this paper is that current smartphones' power saving modes can be improved towards
saving more power and/or gain more user satisfaction only if they start following “preventive” and/or user
customized power saving plans. We develop a number of preventive power saving modes that save the
battery power without the need of using the power of the same battery for detecting abusage. It will be
supporting the user with a preventive plan that could give him/her an idea about what to run or don’t run.
Another issue of current power saving modes is the “One Size Fits All” philosophy which does not take
into consideration the factors that could distinguish different smartphone users, for example, the nature of
the workspace of the user (Indoor/Outdoor), the age, the gender and/or the user’s applications categories
of interests. The paper develops a strategy to match a smartphone power saving mode with its perfect
smartphone user by classifying smartphones users into classes depending on a set of different factors and
having the user to identify himself/herself to the smartphone before the first use.
Monitoring and analysis of reliaibility of electrical distribution systemIAEME Publication
This document summarizes a study on monitoring and analyzing the reliability of electrical distribution systems using MATLAB. The study develops a reliability analysis program in MATLAB to assess factors that affect distribution reliability. Field visits were conducted to distribution substations in India to collect data. The objectives of the study are to provide reliability data to utility management, allow performance comparisons, determine how design and maintenance affect reliability, and aid maintenance scheduling. The significance of the study is that distribution reliability is important for utilities facing market pressures to satisfy customers while minimizing costs. The MATLAB model allows a new method for evaluating reliability and identifying cost-effective preventative maintenance strategies.
Distribution Automation - Emerging Trends and Challenges Providing an overview of challenges, further providing a detail by introducing IEC 61850 standard and finally concluding by discussing the need of a maker approach or workshops thus enabling better skills and development at institutions.
A Framework for Optimizing the Process of Energy Harvesting from Ambient RF S...IJECEIAES
Energy harvesting has been an active research topic in the past half a decade with respect to wireless networks. We reviewed some of the recent techniques towards improving energy harvesting performance to find that there is a large scope of improvement in terms of optimization and addressing problems pertaining to low-powered communicating mobile nodes. Therefore, we present a framework for identifying available RF sources of energy and constructing a robust link between the energy source and the mobile device. We apply linear optimization approach to enhance the performance of energy harvesting. Probabilility theory is used for identification of event loss in the presence of different number of nodes as well as node distances. The objective of the proposed system is to offer better availability of RF signals as well as better probability of energy harvesting for mobile devices. The proposed technique is also found to be computationally cost effective.
IRJET - Energy Efficient Approach for Data Aggregation in IoTIRJET Journal
This document summarizes a research paper on developing an energy efficient approach for data aggregation in IoT networks. The paper proposes using cache nodes between cluster heads and the base station to reduce energy consumption. It analyzes that the proposed technique of deploying cache nodes performs better than the existing LEACH protocol in terms of packet loss, throughput and energy consumption. The simulation results show that the proposed approach lowers packet loss and energy usage compared to directly transmitting data from cluster heads to the base station.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
This document summarizes an article from the International Journal of Electronics and Communication Engineering & Technology. The article describes modeling and simulating test data compression using Verilog. It discusses using efficient bitmask selection and dictionary selection techniques to significantly reduce testing time and memory requirements for system-on-chip designs. The techniques aim to generate maximum matching patterns for test data compression by developing a bitmask selection method and efficient dictionary selection method that considers bitmasks.
This document describes a data acquisition system and wireless telemetry system for unmanned aerial vehicles participating in the Advanced class of the SAE Aero Design competition. The system uses a laser altimeter and GPS module to measure altitude and location, which are sent via an Arduino microcontroller and XBee modules to a base station laptop. The laptop displays the measurements and has a button to trigger cargo release based on the vehicle's position and trajectory calculations. The system was designed to meet the competition's requirements of long range, low power, accurate measurements, and small size for recording altitude and assisting precise cargo deployment from UAVs.
This document summarizes an article from the International Journal of Civil Engineering and Technology that examines optimizing cropping patterns in an irrigation project area. It begins with background on the journal and outlines the objectives of determining optimal cropping patterns given land and water availability. It then reviews previous related studies and describes the study area which is the Mayurakshi Command Area in India. Key concepts are introduced, such as dividing the area into blocks based on agronomic, economic, climatic and rainfall factors. The problem is formulated with the objective of maximizing net return defined as revenue from crop sales minus expenses. Equations are provided to calculate net return per unit area for each crop, soil class, and block based on yield, prices
The document summarizes an experimental investigation into the performance and emissions of a diesel engine fueled with preheated corn oil methyl ester (COME) biodiesel at different temperatures. COME was produced via transesterification of corn oil with methanol. The engine was tested using diesel and blends of preheated COME at 50°C, 70°C, and 90°C. Brake thermal efficiency increased and BSFC decreased with COME preheated to 70°C due to improved combustion from reduced viscosity. Exhaust emissions of CO and HC decreased but NOx increased with COME. Performance generally decreased as the COME percentage in blends rose. Preheating COME to 70°C allowed
This document summarizes a research paper on adding error resilience to test data compression techniques for IP core-based system-on-chips (SoCs). It discusses how bit flips in compressed test data can reduce fault coverage and yield. The document proposes adding parity bits to compressed test vectors to detect and correct errors, similar to parity checking for data transmission. This allows erroneous test data to be retransmitted without loss of synchronization or fault coverage. The method aims to improve on existing approaches that only avoid error propagation between test vectors.
An experimental study is conducted to determine the thermal output of a closed enclosure containing two cylindrical tubes through which biomass is burned. Temperature and energy measurements are taken at various points in the system. Convection and radiation are found to account for 33% of the total energy contained in the fuel wood, representing the useful thermal energy for applications like drying. Mathematical models are developed to describe the thermal energy flows and efficiency of the heat exchanger system.
The techniques and methods adopted in the medical college libraries locatedIAEME Publication
This document summarizes a study on the techniques and methods adopted in medical college libraries located in southern Karnataka, India. It finds that while the libraries generally meet basic needs, there is room for improvement in adapting new tools and techniques, training librarians, increasing staff and resources, and enhancing user services. For example, over 60% of libraries lacked dedicated IT staff, many librarians lacked computer training, and several libraries had collections and facilities below Medical Council of India standards. The study provides benchmarks for improving medical college libraries in the region.
This document summarizes an article from the International Journal of Advanced Research in Engineering and Technology (IJARET) about enhancing movie recommender systems. The article discusses different types of recommender systems including collaborative filtering, content-based filtering, and hybrid filtering approaches. It then proposes a hybrid item-based recommender system that combines usage data, tags, and movie metadata like genres, stars, and directors to improve recommendation accuracy. The proposed approach is evaluated using a dataset and performance metrics to test the effectiveness of the enhanced movie recommender system.
This document summarizes a study that used finite element analysis to analyze stress concentrations at bolt hole locations in lap joints. A 3D finite element model of a lap joint was developed using Abaqus software. Non-linear analysis considered the stress-strain behavior of materials and interactions between bolt and plate surfaces. Parametric studies varied the end distance and compared results to failure criteria in design codes. Stress patterns were compared to bearing capacity equations to determine the optimum end distance that prevents premature failure.
This document provides a review of steel-concrete composite (SCC) girders under shock loads. SCC construction combines the advantages of steel and concrete by using mechanical shear connectors to bond a steel beam and concrete slab. Under shock loads, SCC girders can experience local failures like concrete crushing or steel buckling. The complex force transfer during shock loading is discussed. Different types of shear connectors are described, and the interface behavior between the steel beam and concrete slab is important to resist shear forces. Both full and partial composite action are examined in terms of flexural capacity under different interaction assumptions. The behavior of SCC girders under shock loading, including dynamic load factors, is also reviewed.
Este documento descreve um projeto integrado de aprendizagem na escola EEEF "Governador Angelo Angelin" que tem como tema "O caminho da inclusão digital começa com a alfabetização tecnológica". O projeto foi elaborado e coordenado por Marlei Salete Orlandin e Sirlei do Carmo Pacheco e tem como público-alvo professores e alunos do 1o ao 9o ano do Ensino Fundamental.
O documento é uma opinião sobre o corpo feminino que defende que a beleza feminina não está relacionada a medidas ou peso, mas sim às curvas e proporções naturais do corpo. O autor também critica padrões magros impostos pela moda e incentiva as mulheres a se amarem e cuidarem naturalmente de seus corpos.
Este documento describe un viaje imaginario de 3 días a Granada. El grupo saldrá de su pueblo el 21 de mayo y visitará la Alhambra, el Parque de las Ciencias, el Albaicín y la catedral. Se hospedarán en el Hotel Room Mate Leo y cenarán en dos restaurantes diferentes. Regresarán a su pueblo el 23 de mayo por la tarde.
The document provides a summary prepared by Dr. Mohammad Shaikhani about Sulaimanyah, Iraq in winter 2008. It was prepared by Dr. Mohammad Shaikhani and includes his email address for contact.
O documento descreve a alma humana como contendo um pássaro no seu centro chamado Pássaro da Alma. O pássaro sente os sentimentos humanos e guarda-os em diferentes "gavetas", como a alegria, tristeza e raiva. O conteúdo da gaveta aberta pelo pássaro determina o sentimento que a pessoa experimenta. O documento incentiva as pessoas a ouvirem seus Pássaros da Alma.
Novel Optimization to Reduce Power Drainage in Mobile Devices for Multicarrie...IJECEIAES
This document summarizes a research paper that proposes a novel optimization framework to minimize power drainage in mobile devices using multicarrier-based communication. The framework aims to maintain equilibrium between maximizing data delivery and minimizing transmit power. An analytical model considers multiple radio antennas in mobile devices and includes constraints for data quality and threshold power. The outcome is evaluated based on the amount of power conserved. Testing found the approach offers maximum energy conservation while being compatible with existing mobile network systems.
Novel Optimization to Reduce Power Drainage in Mobile Devices for Multicarrie...IJECEIAES
With increasing adoption of multicarrier-based communications e.g. 3G and 4G, the users are significantly benefited with impressive data rate but at the cost of battery life of their mobile devices. We reviewed the existing techniques to find an open research gap in this regard. This paper presents a novel framework where an optimization is carried out with the objective function to maintain higher level of equilibrium between maximized data delivery and minimized transmit power. An analytical model considering multiple radio antennae in the mobile device is presented with constraint formulations of data quality and threshold power factor. The model outcome is evaluated with respect to amount of power being conserved as performance factor. The study was found to offer maximum energy conservation and the framework also suits well with existing communication system of mobile networks.
IOT-ENABLED GREEN CAMPUS ENERGY MANAGEMENT SYSTEM ijesajournal
Increasing cost and demand for energy is imposing us to find smart ways to save energy. To satisfy the energy requirement and at the same time to cut down the cost, consumption of energy must be monitored and controlled. Energy consumption can be well managed with the capabilities of the Internet of Things (IoT). This paper presents an architecture towards IoT-enabled Green campus Energy Management System. In the proposed system, the data acquisition module collects energy consumption information from each device and transmits it to the cloud platform for further processing and analysis. Since lighting and air conditioning appliances contribute to most of the electricity consumption in the campus environment, they have been taken as a prototype to validate the proposed architecture.
Contemporary Energy Optimization for Mobile and Cloud Environmentijceronline
Cloud and mobile computing applications are increasing heavily in terms of usage. These two areas extending usability of systems. This review paper gives information about cloud and mobile applications in terms of resources they consume and the need of choosing variety of features for users from several locations and the evolutionary provisions for service provider and end users. Both the fields are combined to provide good functionality, efficiency and effectiveness with mobile phones. The enhancement by considering power consumption by means of resource constrained nature of devices, communication media and cost effectiveness. This paper discuss about the concepts related to power consumption, underlying protocols and the other performance issues
ENERGY EFFICIENT COMPUTING FOR SMART PHONES IN CLOUD ASSISTED ENVIRONMENTIJCNCJournal
In recent years, the employment of smart mobile phones has increased enormously and are concerned as an area of human life. Smartphones are capable to support immense range of complicated and intensive applications results shortened power capability and fewer performance. Mobile cloud computing is the newly rising paradigm integrates the features of cloud computing and mobile computing to beat the constraints of mobile devices. Mobile cloud computing employs computational offloading that migrates the computations from mobile devices to remote servers. In this paper, a novel model is proposed for dynamic task offloading to attain the energy optimization and better performance for mobile applications in the cloud environment. The paper proposed an optimum offloading algorithm by introducing new criteria such as benchmarking for offloading decision making. It also supports the concept of partitioning to divide the computing problem into various sub-problems. These sub-problems can be executed parallelly on mobile device and cloud. Performance evaluation results proved that the proposed model can reduce around 20% to 53% energy for low complexity problems and up to 98% for high complexity problems.
A survey paper on an improved scheduling algorithm for task offloading on cloudAditya Tornekar
This document summarizes an article that discusses task offloading from mobile devices to the cloud. It begins by explaining how mobile devices have limitations like battery life and processing power. To address this, the concept of offloading tasks to the cloud is proposed to reduce energy consumption on devices and improve their computation capabilities. The document then discusses how scheduling algorithms can help organize tasks migrated to the cloud efficiently. It reviews several scheduling algorithms and their effectiveness in reducing response time and power consumption. Finally, it discusses how virtual machine management techniques on the cloud can help efficiently utilize resources and further reduce energy usage.
Energy efficient clustering using the AMHC (adoptive multi-hop clustering) t...IJECEIAES
IoT has gained fine attention in several field such as in industry applications, agriculture, monitoring, surveillance, similarly parallel growth has been observed in field of WSN. WSN is one of the primary component of IoT when it comes to sensing the data in various environment. Clustering is one of the basic approach in order to obtain the measurable performance in WSNs, Several algorithms of clustering aims to obtain the efficient data collection, data gathering and the routing. In this paper, a novel AMHC (Adaptive MultiHop Clustering) algorithm is proposed for the homogenous model, the main aim of algorithm is to obtain the higher efficiency and make it energy efficient. Our algorithm mainly contains the three stages: namely assembling, coupling and discarding. First stage involves the assembling of independent sets (maximum), second stage involves the coupling of independent sets and at last stage the superfluous nodes are discarded. Discarding superfluous nodes helps in achieving higher efficiency. Since our algorithm is a coloring algorithm, different color are used at the different stages for coloring the nodes. Afterwards our algorithm (AMHC) is compared with the existing system which is a combination of Second order data CC(Coupled Clustering) and Compressive-Projection PCA(Principal Component Analysis), and results shows that our algorithm excels in terms of several parameters such as energy efficiency, network lifetime, number of rounds performed.
IRJET - IoT based Energy Monitoring System for Energy ConservationIRJET Journal
This document describes the design and implementation of a low-cost IoT energy monitoring system. Sensors are used to measure environmental data like temperature, humidity, and motion. An energy monitoring solution integrates with these sensors. The system uses a PZEM-004T energy meter, CT sensors, an SD3004 chip, and ESP8266 microcontroller to measure voltage, current, power consumption, and more. This data is sent via MQTT to a Raspberry Pi server. The system provides energy monitoring for applications like billing, smart grids, and home automation in a low-cost way. It concludes the system successfully monitors energy metrics and sends data to servers for analysis and management.
Assessment to Delegate the Task to Cloud for Increasing Energy Efficiency of ...IRJET Journal
This document discusses assessing whether tasks on mobile phones should be offloaded to the cloud to improve energy efficiency. It presents a model where mobile devices can offload computationally intensive tasks to the cloud via wireless networks. An experiment is described that compares the energy consumption and time taken of a video conversion task performed locally on a mobile phone versus offloading the task or different parts of the task to a cloud. The results show that offloading the entire task to the cloud reduces energy consumption and processing time compared to performing the task locally on the mobile phone. The document concludes offloading tasks to the cloud can increase a mobile phone's energy efficiency and discusses areas for future work.
Secured Way Of Offloading Mobile Cloud Process For Smart PhoneIRJET Journal
This document proposes a secured way of offloading mobile cloud processes to reduce computation power usage on smartphones. It introduces a ternary decision making (TDM) framework that determines whether a task should be performed on the smartphone or offloaded to the cloud based on estimated execution time and energy consumption. The tasks are offloaded to the cloud for remote execution using an encryption technique for security. This results in reduced computation power usage and battery consumption on smartphones by utilizing cloud resources instead.
Information technology plays a very important role in the progress and development of country. The technology domain is present in every sector like banking, e-commerce, tourism etc. The applications are developed using number of platforms and people are using applications more and more for number of tasks. This paper focus on IOT technology and how it is implemented in power systems like power grids to make proper automation and minimize problems that we face in manual system. Rameez Rashid | Naseer Ganiee"Robotic Monitoring of Power Systems" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, URL: http://www.ijtsrd.com/papers/ijtsrd16961.pdf http://www.ijtsrd.com/engineering/electrical-engineering/16961/robotic-monitoring-of-power-systems/rameez-rashid
IRJET- Iot Based Smart Energy MonitoringIRJET Journal
This document describes an IOT-based smart energy monitoring system that uses an Arduino microcontroller and ESP8266 WiFi module. The system measures energy consumption in watts using a current sensor and displays the readings on an LCD screen and online via a webpage. It allows users to remotely monitor energy usage in real-time. If energy usage exceeds a threshold, the system can detect theft. The system aims to automate meter readings, optimize energy usage, and reduce wastage by providing usage data to consumers.
Modeling and Analysis of Energy Efficient Cellular Networksijtsrd
This document summarizes a research paper on modeling and analyzing energy efficient cellular networks. The paper proposes using techniques like massive MIMO, beamforming, and renewable energy sources to power base stations in order to improve energy efficiency in 5G networks. It describes modeling network energy consumption and throughput using parameters in MATLAB simulations. The results show increasing average user rate, area rate, and energy efficiency as traffic load increases when using the proposed energy efficient techniques compared to 4G networks. The conclusion is that the work presents promising modern wireless technologies to achieve positive energy savings over existing methods for 5G networks.
IRJET- Wifi based Smart Electric Meter using IoTIRJET Journal
This document describes a proposed smart electricity meter system using Internet of Things (IoT) technology. The system would use an ESP8266 WiFi module embedded in a digital electricity meter to automatically send meter readings to a web application over WiFi. This would allow users to monitor their electricity usage in real-time and reduce wastage. The system is designed to be low-cost and easy to implement as a way to address issues with the current manual meter reading process. It would eliminate human errors in reading meters and reduce costs for electricity providers and users.
ANALYSIS AND MODELLING OF POWER CONSUMPTION IN IOT WITH VIDEO QUALITY COMMUNI...ijma
Internet of Things applications such as environmental monitoring and healthcare may involve multimedia
communications from IoT devices to humans for decision-making. Therefore, the quality of delivered
multimedia should be in good perceived quality. Higher video quality results into higher energy consumptions due to encoding and decoding processes and as a result, will affect the performance of IoT devices due to their inherent energy constraints. This paper presents the impact of video encoding
parameters as non-network parameters on the energy consumption of IoT devices. The experimental results from Cooja simulator show that the videos with high bitrates and low frame rates consume more power than videos with low bitrates and high frame rates. It was also found that video content type affects energy consumption. Finally, this paper proposes a power model that takes into account video parameters such as
bit rate, frame rate and content types. The proposed model can play a vital role in video quality adaptation in multimedia communication over IoT devices.
CONTEXT-AWARE ENERGY CONSERVING ROUTING ALGORITHM FOR INTERNET OF THINGSIJCNCJournal
Internet of Things (IoT) is the fast- growing technology, mostly used in smart mobile devices such as notebooks, tablets, personal digital assistants (PDA), smartphones, etc. Due to its dynamic nature and the limited battery power of the IoT enabled smart mobile nodes, the communication links between intermediate relay nodes may fail frequently, thus affecting the routing performance of the network and also the availability of the nodes. Existing algorithm does not concentrate about communication links and battery power/energy, but these node links are a very important factor for improving the quality of routing in IoT. In this paper, Context-aware Energy Conserving Algorithm for routing (CECA) was proposed which employs QoS routing metrics like Inter-Meeting Time and residual energy and has been applied to IoT enabled smart mobile devices using different technologies with different microcontroller which resulted in an increased network lifetime, throughput and reduced control overhead and the end to end delay. Simulation results show that, with respect to the speed of the mobile nodes from 2 to 10m/s, CECA increases the network lifetime, thereby increasing the average residual energy by 11.1% and increasing throughput there by reduces the average end to end delay by 14.1% over the Energy-Efficient Probabilistic Routing (EEPR) algorithm. With respect to the number of nodes increases from 10 to 100 nodes, CECA algorithms increase the average residual energy by16.1 % reduces the average end to end delay by 15.9% and control overhead by 23.7% over the existing EEPR
Sustainable Development using Green ProgrammingIRJET Journal
The document discusses sustainable development using green programming. It notes that programmers typically receive training on programming languages and methodologies but not on software energy consumption. Modern technologies like mobile apps and cloud computing require increased awareness of energy usage. The document outlines various functions that are associated with high energy consumption like graphics, computation, algorithms, memory usage, and networking. It then discusses methods to improve energy efficiency such as using better algorithms, caching, multithreading, and native code. A survey found that programmers have limited knowledge of energy efficiency and best practices for reducing software energy usage. The document argues for educating programmers on the importance of creating energy-efficient software.
Energy efficient power control for device to device communication in 5G netw...IJECEIAES
Next generation cellular networks require high capacity, enhanced efficiency of energy and guaranteed quality of service (QoS). To reach these goals, device-to device (D2D) communication is a candidate technologie for future 5th Generation especially applications that require the reuse, the hop and the proximity gain. The present paper studies the energy efficient power control for the uplink of an OFDMA (orthogonal frequency-division multiple access) system composed of both regular cellular users and device-to-device (D2D) pairs. First, we analyze and model mathematically the prerequisites for D2D communications and classical cellular links in terms of minimum rate and maximum power requirement. Second, we use fractional programming in order to convert the initial problem into a concave one and we apply non-cooperative game theory in order to characterize the equilibrium. Then, we got the solution of the problem from the results of a water-filling power allocation. Moreover, we employ a distributed design for power allocation by means of three methods: a) Theory of fractional programming b) Closed form expression (the novelty is the use of Wright Omega function). c) Inverse water filling. Finally, simulations in both static and dynamic channel setting are realized to demontrate the enhanced gain in term of EE, SE (spectral efficiency) and time of execution of the iterative algorithm (Dinkelbach) than the closed form algorithms.
An energy optimization with improved QOS approach for adaptive cloud resources IJECEIAES
In recent times, the utilization of cloud computing VMs is extremely enhanced in our day-to-day life due to the ample utilization of digital applications, network appliances, portable gadgets, and information devices etc. In this cloud computing VMs numerous different schemes can be implemented like multimedia-signal-processing-methods. Thus, efficient performance of these cloud-computing VMs becomes an obligatory constraint, precisely for these multimedia-signal-processing-methods. However, large amount of energy consumption and reduction in efficiency of these cloud-computing VMs are the key issues faced by different cloud computing organizations. Therefore, here, we have introduced a dynamic voltage and frequency scaling (DVFS) based adaptive cloud resource re-configurability (퐴퐶푅푅) technique for cloud computing devices, which efficiently reduces energy consumption, as well as perform operations in very less time. We have demonstrated an efficient resource allocation and utilization technique to optimize by reducing different costs of the model. We have also demonstrated efficient energy optimization techniques by reducing task loads. Our experimental outcomes shows the superiority of our proposed model 퐴퐶푅푅 in terms of average run time, power consumption and average power required than any other state-of-art techniques.
This document discusses green computing strategies for the Internet of Things (IoT). It begins by explaining how cloud computing services are used to meet the growing demands of IoT but require large energy-consuming data centers. Green computing aims to reduce the energy consumption of IoT devices and computing infrastructure without compromising performance. The document then evaluates aspects of green computing for IoT, including key concepts like edge computing. It also analyzes challenges of green computing implementation and potential solutions. The document concludes that green computing practices can help build a more sustainable IoT ecosystem by reducing energy usage across devices and infrastructure.
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...Zilliz
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
20 Comprehensive Checklist of Designing and Developing a WebsitePixlogix Infotech
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.