1. The variance in the F1 flowers is due to environmental factors as.pdf

•

0 likes•4 views

1. The variance in the F1 flowers is due to environmental factors as petal opening depends on environmental factors. 2.The variance in the F2 flowers is due to both genetic and environmental factors. Heterozygous cross produces petals of different length which is genetic and petal opening depends on environmental factors. 3. 100% of all monozygotic twin pairs would display the same aptitude for winning. Because monozygotes are developed from same zygote that is they same set of genes. Solution 1. The variance in the F1 flowers is due to environmental factors as petal opening depends on environmental factors. 2.The variance in the F2 flowers is due to both genetic and environmental factors. Heterozygous cross produces petals of different length which is genetic and petal opening depends on environmental factors. 3. 100% of all monozygotic twin pairs would display the same aptitude for winning. Because monozygotes are developed from same zygote that is they same set of genes..

Education

Similar to 1. The variance in the F1 flowers is due to environmental factors as.pdf

$Self incompatibility

Indranil Bhattacharjee

(Human Genetics and their disorders) UNIT 1.docx

samakshiverma1

Developmental.ppt

suman soni

Pollination ppt

USHA

Sexual Propagation Seed Propagation (Version 2)

Derrick Yson

Forest regeneration

Dr Shailendra Bhalawe

Mendelian genetics lecture quiz

Marilen Parungao

From the forgoing presentation, it can be concluded that breeding characters viz., flowering period, inflorescence, time of flower opening, time of anther dehiscence, time of stigma receptivity, pollinating agent ,time of visitor of pollinating agent and fruit set (%) in tropical species are required to be studied as they are vital for any improvement and eco-environmental planning purposes. It also throws light on how species adopts itself along with the phenomenon of speciation and reproductive isolation. From these characters we can introduce new variety which is essential for further evaluation and also the identification of the interactions between biological factors, such as animal, plant species, and non-biological factors, like temperature, RH, rain and wind, helps us to elaborate management and conservation plans for the ecosystems of the planet, which have become more and more necessary due to highly increased rate of deterioration of different ecosystems during the last few decades.

Reproductive Biology of Some Tropical Forest Species : Vikas kumar, vkskumar4...

Vivekananda Global University, Jaipur, Rajasthan -303012

Heterosis in brinjal

vinutha patil s

Crop improvement.ppt

maryroseescotido

1. How does the ripened condition of an ovary wall allow you to determine the category of fruits? 2. In phylogenetics, what are sister groups? Synapomorphies? Clades? Nodes? 3. How do inflorescences differ? 4. What is the Linnaean system of classification and what are the appropriate endings for common ranks? 5. Why do gymnosperms lack \"fruits\"? 6. What are synapomorphies and how are they indicated on a phylogeny? 7. Why is the development of seeds considered to be a major advance in the evolution of plants? Solution In ripened condition , an ovary develops into a fruit, the ovary wall becomes the pericarp. ============================================ 2. In phylogenetics, what are sister groups? Synapomorphies? Clades? Nodes? Clades : Two clades are sisters if they have an immediate common ancestor. 3. How do inflorescences differ? inflorescence :it is a group of flowers arranged on a stem that is composed of a main branch . 4What is the Linnaean system of classification and what are the appropriate endings for common ranks? In the scientific classification of Linnaeus there are three kingdoms, isolated into classes, and they, thusly, into a term for rank-based characterization of living beings, as a rule. 5. Why do gymnosperms lack \"fruits\"? As the Gymnosperms do not produce flowers and ovaries synapomorphies : it is a characteristic present in a genealogical species Itis shared exclusively. It is in more or less modified form) by its evolutionary descendants. synapomorphies. : a character or attribute that is shared by at least two scientific categorizations and is gotten through advancement from a typical genealogical shape. 7. Why is the development of seeds considered to be a major advance in the evolution of plants? The development of the seed plants speaks to a noteworthy progress over the more primitive Bryophytes and greeneries. In plants and greeneries, single- celled, haploid spores are the essential means for attacking new living spaces. Spores have almost no sustenance stockpiling and once sprouted can\'t endure extraordinary changes in natural conditions. Additionally, both greeneries and greeneries require water for preparation while seed plants depend on air streams and bugs. The seed plants can finish their life cycle completely on dry land, the length of satisfactory soil dampness from the roots is accessible. Preparation happens inside defensive tissues of the sporophyte (called integuments) and requires no outside water. Seed- bearing plants create megaspores (expansive spores) in megasporangia that form into ovules and, at development, deliver seed. They likewise deliver microspores (little spores) in microsporangia that form into dust grains (male gametophytes) that convey the sperm to the female structures to fulfill fertilization. Fertilization must go before preparation..

1. How does the ripened condition of an ovary wall allow you to dete.pdf

indiaartz

download.pdf

ssuserb80df5

Heredity & Environment.pdf

sadguruprakash

Tree improvement introduction lecture ppt

ShivamYadav362790

Plant hybridization aims, objectives and types of hybridization

Kartik Madankar

Organic Seeds - Seed Development and Germination

Seeds

Pollinator Management for Organic Seed Producers ` For more information, Please see websites below: ` Organic Edible Schoolyards & Gardening with Children = http://scribd.com/doc/239851214 ~ ` Double Food Production from your School Garden with Organic Tech = http://scribd.com/doc/239851079 ~ ` Free School Gardening Art Posters = http://scribd.com/doc/239851159 ~ ` Increase Food Production with Companion Planting in your School Garden = http://scribd.com/doc/239851159 ~ ` Healthy Foods Dramatically Improves Student Academic Success = http://scribd.com/doc/239851348 ~ ` City Chickens for your Organic School Garden = http://scribd.com/doc/239850440 ~ ` Simple Square Foot Gardening for Schools - Teacher Guide = http://scribd.com/doc/239851110 ~

Pollinator Management for Organic Seed Producers

School Vegetable Gardening - Victory Gardens

Pollinator Management for Organic Seed Producers

Seeds

Unfruitfulness (1).ppt

AMBIKABHANDARI5

Mendelism_bsc 2nd sem.pptx

seenumohapatra

Similar to 1. The variance in the F1 flowers is due to environmental factors as.pdf (20)

$Self incompatibility

(Human Genetics and their disorders) UNIT 1.docx

Developmental.ppt

Pollination ppt

Sexual Propagation Seed Propagation (Version 2)

Forest regeneration

Mendelian genetics lecture quiz

Reproductive Biology of Some Tropical Forest Species : Vikas kumar, vkskumar4...

Heterosis in brinjal

Crop improvement.ppt

1. How does the ripened condition of an ovary wall allow you to dete.pdf

download.pdf

Heredity & Environment.pdf

Tree improvement introduction lecture ppt

Plant hybridization aims, objectives and types of hybridization

Organic Seeds - Seed Development and Germination

Pollinator Management for Organic Seed Producers

Unfruitfulness (1).ppt

Mendelism_bsc 2nd sem.pptx

More from sanjeevtandonsre

Above 70 °C, sodium bicarbonate gradually decomposes into sodium car.pdf

sanjeevtandonsre

You need to put your electrons in the first one: ClO2 + e- => ClO2- In the second one, you have done nothing with the hydrogen. H2O2 => O2 + 2H+ + 2e- Now you must multiply the first one by 2 to get the same number of electrons on both sides: 2ClO2 + 2e- => 2ClO2- Now add the equations and eliminate the electrons: H2O2 + 2ClO2 => 2ClO2- + O2 + 2H+ This is now balanced. The charges are the same on both sides and the number of atoms of each element is the same on both sides. The oxidizing agent is the one which gains electrons and is itself reduced. So, yes, it is the ClO2. The reducing agent is the H2O2. This is itself oxidized because it loses electrons to form H+. Solution You need to put your electrons in the first one: ClO2 + e- => ClO2- In the second one, you have done nothing with the hydrogen. H2O2 => O2 + 2H+ + 2e- Now you must multiply the first one by 2 to get the same number of electrons on both sides: 2ClO2 + 2e- => 2ClO2- Now add the equations and eliminate the electrons: H2O2 + 2ClO2 => 2ClO2- + O2 + 2H+ This is now balanced. The charges are the same on both sides and the number of atoms of each element is the same on both sides. The oxidizing agent is the one which gains electrons and is itself reduced. So, yes, it is the ClO2. The reducing agent is the H2O2. This is itself oxidized because it loses electrons to form H+..

You need to put your electrons in the first one .pdf

sanjeevtandonsre

PbSO4 is not generally soluble in water. It will .pdf

sanjeevtandonsre

pH is proportional to the cell potential and it is indicated by the Nernst equation According to Nernst equation -if the reaction occurs in preence of acidic media - Ecell = E0(cell) - 0.0592/n log 1/[H+] [because all other species are at standard conditions] Therefore - Ecell = 0.42 V - (0.0592/n) log 1/[H+] Let n = 1, then - 0 V = 0.42 V - 0.592 pH 0.0592 pH = 0.42 Therefore - pH = 0.42/0.0592 = 6.75 Solution pH is proportional to the cell potential and it is indicated by the Nernst equation According to Nernst equation -if the reaction occurs in preence of acidic media - Ecell = E0(cell) - 0.0592/n log 1/[H+] [because all other species are at standard conditions] Therefore - Ecell = 0.42 V - (0.0592/n) log 1/[H+] Let n = 1, then - 0 V = 0.42 V - 0.592 pH 0.0592 pH = 0.42 Therefore - pH = 0.42/0.0592 = 6.75.

pH is proportional to the cell potential and it i.pdf

sanjeevtandonsre

Nitration occurs through electrophilic addition of aromatic rings by breaking one of its aromatic bonds in order to attack the nitogen. The ring with more electron density will be more likely to add NO2 groups in its meta position (the only position if another group is already attached). When electrophillic addition occurs, the benzene ring would have to unfavorably break its stable aromaticity to attack. However, the phenyl oxygen can donate its electrons to the benzene ring, thus enriching it with electron density and stabilizing the positive charge. The carbonyl group does nothing to stabilize the other benzene ring during its electrophilic addition. In fact, the carbonyl group may as well have the opposite effect: the resonance structure of a single bonded carbon to its oxygen pulls electrons away from the benzene ring through inductive effect. Solution Nitration occurs through electrophilic addition of aromatic rings by breaking one of its aromatic bonds in order to attack the nitogen. The ring with more electron density will be more likely to add NO2 groups in its meta position (the only position if another group is already attached). When electrophillic addition occurs, the benzene ring would have to unfavorably break its stable aromaticity to attack. However, the phenyl oxygen can donate its electrons to the benzene ring, thus enriching it with electron density and stabilizing the positive charge. The carbonyl group does nothing to stabilize the other benzene ring during its electrophilic addition. In fact, the carbonyl group may as well have the opposite effect: the resonance structure of a single bonded carbon to its oxygen pulls electrons away from the benzene ring through inductive effect..

Nitration occurs through electrophilic addition o.pdf

sanjeevtandonsre

I Hope some more information required to solve th.pdf

sanjeevtandonsre

image not visible .pdf

sanjeevtandonsre

What is a mistakeSolutionWhat is a mistake.pdf

sanjeevtandonsre

Water qualities: 1. Physical qualities: Odour and taste : unobjectionable to most users Colour : 15 TCU pH : 6.5 TO 8 Hardness : 500 as caco3 Dissolved solids : 1000 ppm Turbidity : 5 NTU Conductivity : 1500µs/cm 2.Chemical water qualities: Calcium (Ca) :200 mg/litre Chloride (Cl) :250 mg/litre Chlorine residue 0.2-0.5 mg/litre Copper (Cu) 1.0 mg/litre Iron (Fe) 0.3 mg/litre Magnesium (Mg) 150 mg/litre Sulfate 400 mg/litre Zinc 3 mg/litre Phenolic compounds (as phenol) 0.002 mg/litre Detergents (alkyl benzene sulphonates ) 1.0 mg/litre Sodium 200 mg/litre Types of elevated tanks: 1.Water spheroid elevated tank 2. Hydropilar elevated tanks 3. Composite elevated water tank Standard Water spheroid Tank Dimensions: Standard Hydropillar Tank Dimensions Standard Composite Elevated Tank Dimensions:Capacity (US Gallons)Head Range (Feet) Tank Diameter (Feet)500,00040\'55\'10\"750,00040\'64\'8\"1,000,00040\'74\'8\" Solution Water qualities: 1. Physical qualities: Odour and taste : unobjectionable to most users Colour : 15 TCU pH : 6.5 TO 8 Hardness : 500 as caco3 Dissolved solids : 1000 ppm Turbidity : 5 NTU Conductivity : 1500µs/cm 2.Chemical water qualities: Calcium (Ca) :200 mg/litre Chloride (Cl) :250 mg/litre Chlorine residue 0.2-0.5 mg/litre Copper (Cu) 1.0 mg/litre Iron (Fe) 0.3 mg/litre Magnesium (Mg) 150 mg/litre Sulfate 400 mg/litre Zinc 3 mg/litre Phenolic compounds (as phenol) 0.002 mg/litre Detergents (alkyl benzene sulphonates ) 1.0 mg/litre Sodium 200 mg/litre Types of elevated tanks: 1.Water spheroid elevated tank 2. Hydropilar elevated tanks 3. Composite elevated water tank Standard Water spheroid Tank Dimensions: Standard Hydropillar Tank Dimensions Standard Composite Elevated Tank Dimensions:Capacity (US Gallons)Head Range (Feet) Tank Diameter (Feet)500,00040\'55\'10\"750,00040\'64\'8\"1,000,00040\'74\'8\".

Water qualities1. Physical qualitiesOdour and taste unobject.pdf

sanjeevtandonsre

Uses of HRIS Systems: The principle motivation behind keeping up HRIS framework is to assemble, arrange, process, record and disperses the data required for productive and successful administration of HR in the association.The various uses of HRIS in an organisation can be listed as follows: 1. Work force Administration: It envelops individual data of a worker. These may incorporate name, address, date of birth, conjugal status, and the date of joining the association. It additionally contains the name and address of next kinfolk of the worker concern. These data depict the representative. 2. Compensation Administration: One of the elements of HRIS is to give a report containing data like present compensation, advantages, last boost in salary and proposed increment in future. 3. Leave/Absence Increase: HRIS is likewise used to control leave/nonattendance of representatives. This is finished by keeping up a leave history of every worker. Each worker can be issued a character card composing each representative\'s token number coded on it. Worker\'s entrance and exit from the association ought to be recorded on the personality card. This diminishes chances for misbehavior or oversight in computing compensation for every worker. 4. Aptitude Inventory: Recording representative aptitudes and checking an expertise information base is yet another utilization of the HRIS. Such an aptitude record recognizes representatives with the fundamental expertise for specific positions or occupations in an association. 5. Labor Planning: HRIS is utilized for labor arranging too. It keeps data of hierarchical necessities as far as positions. HRIS associates workers to the required positions in the association. It is additionally used to recognize opening and build up workers consequently. HRIS can likewise distinguish a legitimate movement way and the progressions to be taken for worker progress/headway. 6. Enlistment: Enlistment shapes the most crucial capacity of HRM. HRIS helps in the enlistment procedure bigly by recording the points of interest of exercises required in worker enrollment. These may incorporate expense and strategy for enlistment and time taken to fill the positions level astute, for instance. 7. Profession Planning: By giving important data, for example, which representatives have been reserved for which positions, HRIS encourages positional headway of workers. At the end of the day, HRIS helps in making arrangements for progression. 8. Aggregate Bargaining: HRIS through a work station can give a la mode pertinent and required data, statistical data points and, in this manner, can encourage aggregate bartering. It would he be able to p aggregate bartering as \"consider the possibility that investigation\" rather as sentiments and fictions. In the same way, HRIS can likewise keep up better human relations in the association. Solution Uses of HRIS Systems: The principle motivation behind keeping up HRIS framework is to assemble, arrange, proces.

Uses of HRIS SystemsThe principle motivation behind keeping up HR.pdf

sanjeevtandonsre

The moving force behind IT decisions are variable as to what context can it profit an organisation or a business. Some of it are as follows- 1) Displacement of labour and capital(ex-ATM) 2)Data repositories, ERP, business intelligence and high-end analytics help decision-makers discover operational flaws and successes which augments future strategic initiatives. 3)Maintaining the customer relationshio management(CRM) [by providing goods and services that customers value]. 4) Maintaining the supply chain management(SCM).[ex- increase productivity through the most efficient manufacturing processes available. In the computer industry, Dell Computer has consistently been a market leader as they have achieved efficiencies through implementing both CRM and SCM with success.] General Recommendations • Develop a three-tiered set of business case methodologies that are scaled to the size and complexity of an initiative. These methodologies should be Web-supported. Specific tools should include: Tier 1 (least complex/cost): Total Cost of Ownership; Tier 2 (middle/cost): Total Cost of Ownership, Payback Period, Benefit/Cost Ratio, Internal Rate of Return, and Return on Investment; Tier 3 (most complex/cost): Applied Information Economics. • The tier requirements are phased to the initiative’s life cycle, requiring that business case metrics be completed during the planning phase and refined as the initiative moves through the various stages of its remaining life cycle. • Convene a task group to develop accounting reports/tools to more easily track the financial metrics identified by the business case methodologies. • Develop an in-depth training program and technical assistance program for agency program, business, IT, and legislative staff on the adopted business case methodologies. • Develop a training/orientation program for senior department and line/staff managers that include essential legal, financial/budgetary, IT architectural, and IT project management issues. This orientation should be offered (possibly required) for all agencies contemplating an initiative involving an information technology investment. Solution The moving force behind IT decisions are variable as to what context can it profit an organisation or a business. Some of it are as follows- 1) Displacement of labour and capital(ex-ATM) 2)Data repositories, ERP, business intelligence and high-end analytics help decision-makers discover operational flaws and successes which augments future strategic initiatives. 3)Maintaining the customer relationshio management(CRM) [by providing goods and services that customers value]. 4) Maintaining the supply chain management(SCM).[ex- increase productivity through the most efficient manufacturing processes available. In the computer industry, Dell Computer has consistently been a market leader as they have achieved efficiencies through implementing both CRM and SCM with success.] General Recommendations • Develop a three-tiered set of business .

The moving force behind IT decisions are variable as to what context.pdf

sanjeevtandonsre

The Canadian city with a pre- 1800 historic heart is QuebecSolut.pdf

sanjeevtandonsre

Solution : Millennials referred to as narcissistic referred to as narcissistic because people born between 19th and 20th century are consider as more self centred than any other generation.But this statement is not valid due to the fact that when we compare many generation then it is found that some previous generation are more narcissistic than Millennials.Self esteem is common factor for all the generation but there is difference in degree it exist.So,it is not right to blame one generation as narcissistic..

Solution Millennials referred to as narcissistic referred to as n.pdf

sanjeevtandonsre

SolutionThe SELECT DISTINCT stamen will returns distinct values. .pdf

sanjeevtandonsre

Starting from the topmost column,1. Cerebellum2. Spinocerebellar.pdf

sanjeevtandonsre

Rheumatic fever shows various symptoms and signs, out of which sore throat is one of the symptoms. Only 35-60% of patients show the symptom of upper respiratory sore throat several weeks preceeding rheumatic fever. Many symptomatic individuals do not seek medical attention, go undiagnosed, or do not take the prescribed antibiotic for acute rheumatic fever prevention. Treatment with penicillin will reduce 80% of rheumatic fever risk. Solution Rheumatic fever shows various symptoms and signs, out of which sore throat is one of the symptoms. Only 35-60% of patients show the symptom of upper respiratory sore throat several weeks preceeding rheumatic fever. Many symptomatic individuals do not seek medical attention, go undiagnosed, or do not take the prescribed antibiotic for acute rheumatic fever prevention. Treatment with penicillin will reduce 80% of rheumatic fever risk..

Rheumatic fever shows various symptoms and signs, out of which sore .pdf

sanjeevtandonsre

Physiological responce are those in which the functions of the body parts changes or affected. so examples include 1) excessive heat causes the blood vessel to dilate 2) a mammal shivers to generate heat when it is cold Anatomical response are those in which internal body tissue or organs affects.So examples include 1) A rabbit grows thicker fur during winter 2) A plant grows deeper root in draught. Behavioral response are those in which behavior of an organism affects So example includes 1) During cold weather honey bee huddle together to keep warm 2) Monarch butterfly migrate to warmer region during winter 3) A reptile migrate to shaded area to lower its body temperature. Solution Physiological responce are those in which the functions of the body parts changes or affected. so examples include 1) excessive heat causes the blood vessel to dilate 2) a mammal shivers to generate heat when it is cold Anatomical response are those in which internal body tissue or organs affects.So examples include 1) A rabbit grows thicker fur during winter 2) A plant grows deeper root in draught. Behavioral response are those in which behavior of an organism affects So example includes 1) During cold weather honey bee huddle together to keep warm 2) Monarch butterfly migrate to warmer region during winter 3) A reptile migrate to shaded area to lower its body temperature..

Physiological responce are those in which the functions of the body .pdf

sanjeevtandonsre

NaF is the only oneSolutionNaF is the only one.pdf

sanjeevtandonsre

okkkSolutionokkk.pdf

sanjeevtandonsre

Minimum IQ is 131SolutionMinimum IQ is 131.pdf

sanjeevtandonsre

More from sanjeevtandonsre (20)